English dropdown-ico

Manual Cisco Systems 3200

246 pages 69.64 mb
Download

Go to site of 246

Summary
  • Cisco Systems 3200 - page 1

    Americas Hea dquarters Cisc o Syst ems , Inc . 170 West Ta sman Driv e San Jos e, CA 95 134-1706 USA http://www.ci sco.com Tel: 408 526-4000 800 553- NETS (638 7) Fax: 408 527-0883 Cisco T elePresence Sy s t e m 320 0 Assembl y Guide Use & Care Guide Field-Repl aceable Unit Guide July 28, 20 08 Text Pa rt Numbe r: OL -14521-0 1 ...

  • Cisco Systems 3200 - page 2

    THE SPECIFICATIONS AND INFORMATION REGARDING TH E PRODUCTS IN THIS MANUAL ARE SUBJE CT TO CHANGE WITHOUT NO TICE. ALL STATEMENT S, INFORMATI ON, AND RE COMMENDATIONS IN T HIS MA NUAL ARE BELI EVED TO BE ACCURATE BUT ARE P RESENTED WITHOUT WARRANTY OF ANY KIND, EXPRE SS OR IMPLIED. USERS MUST TA KE FULL RESPONSIBILITY FOR THEIR AP PLICATION OF ANY P ...

  • Cisco Systems 3200 - page 3

    Content s iii Cisco TelePr esence Syste m 3200 OL-14521-01 Preface ix Intro ducti on i-ix Conv enti ons i-ix Obtain ing Docu mentat ion, Obt aining Su pport , and Secur ity Gui deline s i-x Relat ed D ocum ent atio n i-x CHAPTER 1 Overview 1-1 Chapter Organi zation 1-1 Conv enti ons an d Term ino logy 1-3 Tools an d Equip ment List 1-3 CHAPTER 2 Bu ...

  • Cisco Systems 3200 - page 4

    Cont ent s iv Cisco Tele Presence Syste m 3200 OL-14521-01 CHAPTER 10 First- Tim e Se tup 10-1 Parts Li st 10-1 Loadi ng C TS Admi nist rati on So ftw are 10-1 Config urin g an Alte rnate TFT P Server (Option al) 10-4 Setti ng Up CTS Compo nents 10-4 Setti ng Up the Displ ays 10-5 Setti ng Up the Ca meras 10-6 Setti ng Up the Sp eakers 10-13 Setti ...

  • Cisco Systems 3200 - page 5

    Content s v Cisco TelePr esence Syste m 3200 OL-14521-01 Replac ing a Micr ophon e—Part Numb er CTS-MIC 12-12 Requir ed Infor mation , Tools, and Equipme nt 12-12 Removing and Repl acing a Fi rst Row Mic rophone 12-12 Removing and Replac ing a Second Row Mi crophon e 12-13 Replac ing a Li ght Fixt ure—Part Number CT S-LIGHT-F IXT 12-14 Requir e ...

  • Cisco Systems 3200 - page 6

    Cont ent s vi Cisco Tele Presence Syste m 3200 OL-14521-01 Carton 12 of 58: Camer a Assembl y Bracket , 69-1627 -xx, CTS3K-STRUCT URE A-6 Carton 13 of 5 8: Brac kets, 69-16 32-xx, CTS3K- STRUCTU RE A-6 Carton 14 of 58: Priva cy Pa nel, R ight Wi ng, 69-1628- xx, CT S3K-STR UCTURE A-6 Carton 15 of 5 8: Fro nt Fo ot S tabili zer, 69-16 24-xx, CST3K- ...

  • Cisco Systems 3200 - page 7

    Content s vii Cisco TelePr esence Syste m 3200 OL-14521-01 Carton 48 of 58: Acces sory Ca binet , Lef t, 69- 1838-xx, CTS 3K-M-TA BLE-G2 A-16 Carto n 49 of 58 : Ligh ting As semb ly, 69 -16 12-xx , CTS3 K-LI GHT -STR A-16 Carto n 50 of 58 : Cisc o TelePr esence 3200 S truct ure—Add ition to S tanda rd CT S-3000, CTS32-ST RUCTURE, 69- 1854- 01 A-1 ...

  • Cisco Systems 3200 - page 8

    Cont ent s viii Cisco Tele Presence Syste m 3200 OL-14521-01 ...

  • Cisco Systems 3200 - page 9

    ix Cisco TelePr esence Syste m 3200 OL-14521-01 Preface Revised: July 28 , 2008, OL-14521-0 1 Introduction The Cisco T elePr esence 320 0 Assembly Gui de ou tline s the s teps a nd be st p ractices for asse mbling and installing the Cisco T elePresence 3200. This guide is intende d primarily for install ers of the Cisco T elePr esence System 3200. ...

  • Cisco Systems 3200 - page 10

    x Cisco Tele Presence Syste m 3200 OL-14521-01 Preface Obtaining D ocumentat ion, Obtai ning Suppor t, and Secur ity Gui delines Ti p Means the inf ormation cont ains useful tips. Obtaining Do cumentation, Obtaining Support, and Security Guidelines For informat ion on obtai ning docu menta tion, sub mittin g a service re quest, an d gathering addit ...

  • Cisco Systems 3200 - page 11

    CH A P T E R 1-1 Cisco TelePre sence System 3200 OL-14521-01 1 Overview Revised: July 28 , 2008, OL-14521-0 1 Chapter Organization Chapter 1, “Overview” (this chapter ) • Provides c hapter organization and content of th is do cument and a n overview of the steps y ou perform to install a CTS-32 00 system. Chapter 2, “B uilding the Disp lay ...

  • Cisco Systems 3200 - page 12

    1-2 Cisco Tele Presence Syste m 3200 OL-14521-01 Ch apter 1 Ov erv iew Chapter Organiza tion Chap ter 7, “Bui ldin g the Seco nd Row Tab le Ass embly” • This ch apter de scri bes ho w to b uild the second ro w table and is or ganized the same as Cha pter 2 . Chap ter 8, “Ass embli ng th e Rem ainin g Cisc o Te lePres ence Eleme nts” • T ...

  • Cisco Systems 3200 - page 13

    1-3 Cisco TelePre sence System 3200 OL-14521-01 Chapter 1 Overview Conventi ons and Te rminol ogy Step 2 Install and co nnect the PDUs for the display an d f irst ro w table assem bly . See Step 1 th rough Step 3 in Chapter 9, “ Routing Power and Signa l Cables” to install the PDUs and Step 4 in Chap ter 9, “Rout ing Po wer and Signal Cables? ...

  • Cisco Systems 3200 - page 14

    1-4 Cisco Tele Presence Syste m 3200 OL-14521-01 Ch apter 1 Ov erv iew Tools and Equ ipm ent List • Larg e Phillips scre wd ri ve r • T i n snips* • Palle t jack o r hand cart ( for mo ving comp onent box es to installati on site) * • Saf e ty g love s * • Safety glasses* • Box cutters* Cisc o TeleP resen ce Syst em 3200 S truct ure, Ac ...

  • Cisco Systems 3200 - page 15

    CH A P T E R 2-1 Cisco TelePre sence System 3200 OL-14521-01 2 Building the Display Assembly Revised: July 28 , 2008, OL-14521-0 1 Parts List Key Part De scrip tion Part Nu mber Qty Ctn Notes 1 Display structure 700-233 58-xx 3 35, 36, 37 2 Rear foo t stab ilizer 700-233 60-xx Kit# 69- 1625-x x 6 18 3 Front f oot stab ilizer 700-233 59-xx Kit # 69- ...

  • Cisco Systems 3200 - page 16

    2-2 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 2 Building the Display Assembly Parts Li st Cautio n The disp lay stru ctures are unstabl e durin g assemb ly . Use c aution , and suppor t all struc tures as re quired . War ni n g Only trained and qualified personnel s hould be allowed to install , replace, or service this equipment. Note T ...

  • Cisco Systems 3200 - page 17

    2-3 Cisco TelePre sence System 3200 OL-14521-01 Chapter 2 Buildin g the Dis play Assem bly Parts List Step 2 Attach th e Codec Safety tra ys to the Front F oot stab ilizers . Note If you ordere d a Presen tation Cod ec, atta ch the lar ger tra y that comes with the Pres entation Codec packag e, p art no . 700 -25301- 01, i n the ce nter d isplay . ...

  • Cisco Systems 3200 - page 18

    2-4 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 2 Building the Display Assembly Parts Li st Step 3 Attach the Rear and Front Foot stabi lizers to the Display structur es. Figur e 2-3 Rear and F ront F oot stabiliz ers 201101 3 12 11 2 1 ...

  • Cisco Systems 3200 - page 19

    2-5 Cisco TelePre sence System 3200 OL-14521-01 Chapter 2 Buildin g the Dis play Assem bly Parts List Step 4 Attach the left and right Display Shel f supports t o each Displa y structure. Figur e 2-4 Lef t and Righ t Displa y Shelf suppor ts 201103 5 12 11 6 1 ...

  • Cisco Systems 3200 - page 20

    2-6 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 2 Building the Display Assembly Parts Li st Step 5 Attach the D isplay T ilt brac ket s to e ach Disp lay st ructure. Figur e 2-5 Displa y Tilt brac k ets Note Do not tighten the Disp lay T ilt brackets. Y ou will ne ed to ad just them to le ve l the Pla sma display s in Chapter 3, “Mounti ...

  • Cisco Systems 3200 - page 21

    2-7 Cisco TelePre sence System 3200 OL-14521-01 Chapter 2 Buildin g the Dis play Assem bly Parts List Step 6 Attach the Camera As sembly br acket to the center Dis play stru cture, making sur e that this s truct ure use s the lar g er code c tray . Figur e 2-6 Camer a Assembly br ac k et Note Th e Came ra Asse mbly bra cket atta ches to the ce nte ...

  • Cisco Systems 3200 - page 22

    2-8 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 2 Building the Display Assembly Parts Li st Step 7 Attach t he upp er and lower Suppor t crossba rs to t he left an d right Display structur es. Figur e 2-7 Upper and Lo wer Sup por t cr ossba rs 201107 10 12 10 1 11 ...

  • Cisco Systems 3200 - page 23

    2-9 Cisco TelePre sence System 3200 OL-14521-01 Chapter 2 Buildin g the Dis play Assem bly Parts List Step 8 Attach t he upp er and lower Suppor t crossba rs to the cent er Displ ay struc ture. Figur e 2-8 Upper and Low er Support cr ossbars Ti p Use the screw holes near est the ends of the Support cro ssbars. 201108 10 12 10 1 10 10 11 ...

  • Cisco Systems 3200 - page 24

    2-10 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 2 Building the Display Assembly Parts Li st Step 9 Position the three Disp lay structu res relati ve to the r ear w all. Figur e 2-9 P ositio ning the Displa y Str uctu r es 204152 18 - 22” (45.7 cm - 55.8 cm) 32 - 36” (81 cm - 91 cm) 32 - 36” (81 cm - 91 cm) ...

  • Cisco Systems 3200 - page 25

    CH A P T E R 3-1 Cisco TelePre sence System 3200 OL-14521-01 3 Mounting and Leveling the Plasma Displays Revised: July 28 , 2008, OL-14521-0 1 Parts List War ni n g Only trained and qualified personnel s hould be allowed to install , replace, or service this equipment. Note Th e direc tions left and right re fer to the asse mbly a s you face t he P ...

  • Cisco Systems 3200 - page 26

    3-2 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 3 Mounting an d Levelin g the Pla sma Display s Parts Li st Step 1 Hang the le ft, cen ter , and ri ght Pl asma dis pla ys on t he Dis play struc ture cross bars. Figur e 3-1 The lef t, cente r , and r ight Plasma di splay s Cautio n The ed ges of the Plasm a displays ar e sharp and uncomfo r ...

  • Cisco Systems 3200 - page 27

    3-3 Cisco TelePre sence System 3200 OL-14521-01 Chapter 3 Mounting and L eveling the Plasma Display s Parts List Step 2 Loosely attach the Display shelves to the Display shelf supports. Figur e 3-2 Loosely Atta ch the Displa y shelves t o the Displa y Shelf Suppor ts Note The Display shelves are use d in this chapter for le v eling purpose s only . ...

  • Cisco Systems 3200 - page 28

    3-4 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 3 Mounting an d Levelin g the Pla sma Display s Purpose of Le veling t he Plasm a displays Purpose of Levelin g the Plasma displays The three Pl asma disp lays act a s windo ws all owi ng a thre e-way v iew into the r emote Cisco T elePresence conf erence ro om. The Disp lay shelf in fr ont o ...

  • Cisco Systems 3200 - page 29

    3-5 Cisco TelePre sence System 3200 OL-14521-01 Chapter 3 Mounting and L eveling the Plasma Display s Purpose of Leveli ng the Pl asma displays Levelin g Goals Lev eling the Display shelves and the Pla sma displays, and aligning the seams of the Display shelves with the edges of the Plasma disp lays ensur e that im ages disp layed from t he remot e ...

  • Cisco Systems 3200 - page 30

    3-6 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 3 Mounting an d Levelin g the Pla sma Display s Purpose of Le veling t he Plasm a displays Step 5 The surface of the Display shelves should not obstruct any l ines of resolution. Use the Plasma display Le v eling f eet to raise o r lo wer the Plasma d isplays and ma ke s ure all line s of re ...

  • Cisco Systems 3200 - page 31

    3-7 Cisco TelePre sence System 3200 OL-14521-01 Chapter 3 Mounting and L eveling the Plasma Display s Purpose of Leveli ng the Pl asma displays Step 6 Use the Plasma displa y Le v eling fee t to le vel the Pla sma disp lays along th e X axis. Use the Display tilt bra ckets to le ve l the Plasma displays along the Y axis. Ti p Y ou shou ld leve l th ...

  • Cisco Systems 3200 - page 32

    3-8 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 3 Mounting an d Levelin g the Pla sma Display s Purpose of Le veling t he Plasm a displays Step 7 Align the ed ges of Pla sma d isplays The gap be tween Plas ma displa ys should be uniformly even from the t op edg e of the Plasm a display to the bo ttom ed ge. Y ou sh ould try to m ake the ga ...

  • Cisco Systems 3200 - page 33

    3-9 Cisco TelePre sence System 3200 OL-14521-01 Chapter 3 Mounting and L eveling the Plasma Display s Purpose of Leveli ng the Pl asma displays Step 8 Align th e seams of the Disp lay shelve s with the seam s between Plas ma displays. Y ou may need to adjust the Plasma displays lef t to right so the seam created betwe en the edges of two Plasma dis ...

  • Cisco Systems 3200 - page 34

    3-10 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 3 Mounting an d Levelin g the Pla sma Display s Purpose of Le veling t he Plasm a displays Step 9 Comple te the plas ma disp lay sc reen se tup by ap plying the Blac k Buffer str ips. Figur e 3-9 Apply the B lack B uff er strips 201119 ...

  • Cisco Systems 3200 - page 35

    CH A P T E R 5-1 Cisco TelePre sence System 3200 OL-14521-01 5 Building the Display Shelf Assembly Revised: July 28 , 2008, OL-14521-0 1 Parts List Display Shelf, T ype 1 Key Part Descr iption Part Number Qty Ctn Notes 1 Display shelf section: left 95-9692- xx Kit # 74-530 4-xx 1 58 2 Display shel f section: center 95-9694- xx Kit # 74-530 6-xx 1 5 ...

  • Cisco Systems 3200 - page 36

    5-2 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 5 Building the Display Shelf Assembly Part s List Cautio n The shel f segments are un stable dur ing assem bly . Use caution, and suppor t all struct ures as req uired. War ni n g Only trained and qualified personnel s hould be allowed to install , replace, or service this equipment. Cautio n ...

  • Cisco Systems 3200 - page 37

    5-3 Cisco TelePre sence System 3200 OL-14521-01 Chapter 5 Buildin g the Dis play She lf Asse mbly Parts List Step 1 Attach the D isplay sh elf har dwar e. Figur e 5-1 Displa y shelf har dw ar e Note T he Right Acce ssory Cabinet attac hment br acke t (mark ed “6” in the illust ration) , has a centr al rectan gular ho le that dif ferentiates it ...

  • Cisco Systems 3200 - page 38

    5-4 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 5 Building the Display Shelf Assembly Part s List Step 2 Attach the l eft Di splay s helf. Figur e 5-2 Lef t Dis pla y shelf 201148 1 13 13 ...

  • Cisco Systems 3200 - page 39

    5-5 Cisco TelePre sence System 3200 OL-14521-01 Chapter 5 Buildin g the Dis play She lf Asse mbly Parts List Step 3 Attach the c enter D isplay s helf Figur e 5-3 Cent er Displ a y shelf Note Refer to Figure 5-1 to see the h ardw are us ed to atta ch the cent er Di splay she lf to t he left Disp lay shelf. 201149 2 13 13 ...

  • Cisco Systems 3200 - page 40

    5-6 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 5 Building the Display Shelf Assembly Part s List Step 4 Attach the r ight Di splay shelf. Figur e 5-4 Right Displa y shelf Note Refer to Figure 5-1 to see the hardwar e used to attach the righ t Display shelf to the cente r Display shelf. 201150 3 13 13 ...

  • Cisco Systems 3200 - page 41

    5-7 Cisco TelePre sence System 3200 OL-14521-01 Chapter 5 Buildin g the Dis play She lf Asse mbly Parts List Step 5 Attach the screen sup ports to th e access ory cab inets an d position, but do not attach, the cabi nets to the left and righ t attach ment bra ckets These sc reen su pports a re only requir ed if you use a T ype 1 proj ector screen, ...

  • Cisco Systems 3200 - page 42

    5-8 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 5 Building the Display Shelf Assembly Part s List ...

  • Cisco Systems 3200 - page 43

    CH A P T E R 4-1 Cisco TelePre sence System 3200 OL-14521-01 4 Building the Lightin g Assembly Revised: July 28 , 2008, OL-14521-0 1 Parts List Key Part Description Part Number Qty Ctn Notes 1 Lighti ng su pport b rackets 700-23749 -xx 6 49 2 Support struts 700-23752 -xx 6 49 3 End st ructur e br ackets 700-2 3750-x x 4 49 4 Plasti c diffuser panel ...

  • Cisco Systems 3200 - page 44

    4-2 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 4 Building the Lighting Assembly Parts Li st War ni n g Only trained and qualified personnel s hould be allowed to install , replace, or service this equipment. Cautio n Metal and plastic edge s can be sharp. Cisc o recomme nds you we ar safe ty gloves and safety gla sses when attaching t he ...

  • Cisco Systems 3200 - page 45

    4-3 Cisco TelePre sence System 3200 OL-14521-01 Chapter 4 Building th e Lighti ng Assemb ly Parts List Step 1 Assemble the six Suppor t struts and si x Lighti ng Suppor t brac kets. Figur e 4-1 Suppor t str uts and Lighting Su ppor t bra ck ets 2 27 1 201125 ...

  • Cisco Systems 3200 - page 46

    4-4 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 4 Building the Lighting Assembly Parts Li st Step 2 Attach the left and ri ght outer Supp ort brac kets (from Figure 4-1 ) to the horizontal ba r on the left and right Display structures. Figur e 4-2 Left and Right out er Suppor t br ack ets (fr om Fig ur e 4-1 ) Note Use any of t he six b ra ...

  • Cisco Systems 3200 - page 47

    4-5 Cisco TelePre sence System 3200 OL-14521-01 Chapter 4 Building th e Lighti ng Assemb ly Parts List Step 3 Attach the four inne r Support bra ckets to the Supp ort crossb ars. Figur e 4-3 Fou r inner Suppo rt br ack ets (from Figure 4-1 ) Note Use any of t he six b rackets that y ou assemb led in Step 1 . Ther e is no phy sical d if feren ce bet ...

  • Cisco Systems 3200 - page 48

    4-6 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 4 Building the Lighting Assembly Parts Li st Step 4 Attach th e four En d struc ture bra ckets to the ends of the Suppo rt cross bars. Figur e 4-4 Fou r End str uctur e brac k ets 201128 3 31 31 ...

  • Cisco Systems 3200 - page 49

    4-7 Cisco TelePre sence System 3200 OL-14521-01 Chapter 4 Building th e Lighti ng Assemb ly Parts List Step 5 Attach th e three Refl ector botto m trays to th e Support br acket s. Figur e 4-5 Thr ee Refle ct or bot t om tr a ys 201129 27 32 13 27 14 ...

  • Cisco Systems 3200 - page 50

    4-8 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 4 Building the Lighting Assembly Parts Li st Step 6 Attach the t wo Reflector bottom spacers to join the three Refl ector bottom tray s. Figur e 4-6 T wo Reflec tor bot t om space rs 201 130 13 14 16 27 ...

  • Cisco Systems 3200 - page 51

    4-9 Cisco TelePre sence System 3200 OL-14521-01 Chapter 4 Building th e Lighti ng Assemb ly Parts List Step 7 Attach the l eft and righ t (v ertical) Reflec tor Bottom e nds t o the End Str ucture brack ets and att ach t he complian ce sticke r to the left reflector bottom end. Figur e 4-7 Lef t and Righ t (v ertic al) Reflect or Bott om en ds 27 1 ...

  • Cisco Systems 3200 - page 52

    4-10 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 4 Building the Lighting Assembly Parts Li st Step 8 Attach the Light Cup brac ket to the l eft and rig ht (v ertical) Reflecto r Bottom e nds. Figur e 4-8 Light Cup br ac k et 23 27 15 201 132 ...

  • Cisco Systems 3200 - page 53

    4-11 Cisco TelePre sence System 3200 OL-14521-01 Chapter 4 Building th e Lighti ng Assemb ly Parts List Step 9 Attach the three 5-foot Light f ixtures inside th e Reflector bottoms. Figur e 4-9 Thr ee 5-f oot Light fixtur es 24 24 27 13 24 32 ...

  • Cisco Systems 3200 - page 54

    4-12 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 4 Building the Lighting Assembly Parts Li st Step 10 Attach the l eft and rig ht 4-foot Side L ight f ixtures to the left and right (v ertica l) Reflector Bottom ends. Figur e 4-1 0 Lef t and Right 4-f oot Side Light fixt ur es Note Th e power cords for th e Side Ligh t fixtures should exten ...

  • Cisco Systems 3200 - page 55

    4-13 Cisco TelePre sence System 3200 OL-14521-01 Chapter 4 Building th e Lighti ng Assemb ly Parts List Step 11 Attach th e two center Met al T rim panels. Figur e 4-1 1 T wo c ent er Metal T r im pa nels 12 9 201 135 31 ...

  • Cisco Systems 3200 - page 56

    4-14 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 4 Building the Lighting Assembly Parts Li st Step 12 Attach the tw o side Meta l T rim panels. Figur e 4-1 2 T wo side Metal T r im pan els 34 10 31 201 136 ...

  • Cisco Systems 3200 - page 57

    4-15 Cisco TelePre sence System 3200 OL-14521-01 Chapter 4 Building th e Lighti ng Assemb ly Parts List Step 13 Attach the cen ter Pl astic Di ff user panel. Figur e 4-1 3 Cent er Plastic Diff user panel 201 137 4 31 ...

  • Cisco Systems 3200 - page 58

    4-16 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 4 Building the Lighting Assembly Parts Li st Step 14 Attach the lef t and right plastic dif fuser panels. Bef ore fully tight ening the scre ws, adj ust the panels to the left or right to ens ure that the spa cing betwe en the dif fuser panels are e v en. Figur e 4-1 4 Lef t and Righ t Plast ...

  • Cisco Systems 3200 - page 59

    4-17 Cisco TelePre sence System 3200 OL-14521-01 Chapter 4 Building th e Lighti ng Assemb ly Parts List Step 15 Attach the fo ur L- brack ets to the tw o (ver tical) e nd Plastic Dif fuser panels. Figu re 4-15 Four L -brackets 201139 5 31 8 ...

  • Cisco Systems 3200 - page 60

    4-18 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 4 Building the Lighting Assembly Parts Li st Step 16 Attach the t wo (v ertical) Plastic D iff user panels to the End Stru cture b rack ets. Figur e 4-1 6 T wo (v er tical) Pla stic Dif fuser pane ls 5 31 201 140 3 ...

  • Cisco Systems 3200 - page 61

    4-19 Cisco TelePre sence System 3200 OL-14521-01 Chapter 4 Building th e Lighti ng Assemb ly Parts List Step 17 Slide the Plast ic Dif fuser Panel br ace betwee n the end (v ertical) Plasti c Dif fuser panel and the left an d right Plastic Dif fuser panels. Figur e 4-1 7 Plastic D if fuse r P a nel br ace Note If a di ff user becom es scra tched, u ...

  • Cisco Systems 3200 - page 62

    4-20 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 4 Building the Lighting Assembly Parts Li st Step 18 Attach the cent er Reflecto r top to the c enter Refle ctor bott om. Figur e 4-1 8 Center Reflect or top Note Do not tighten scre ws until co mpleting Step 22 . 17 1 3 27 201 141 ...

  • Cisco Systems 3200 - page 63

    4-21 Cisco TelePre sence System 3200 OL-14521-01 Chapter 4 Building th e Lighti ng Assemb ly Parts List Step 19 Attach the lef t and rig ht Refle ctor tops to the le ft and r ight Ref lector botto ms. Figur e 4-1 9 Left and Right Refle ct or t ops Note Do not tighten scre ws until co mpleting Step 22 . 18 18 14 32 201 142 27 ...

  • Cisco Systems 3200 - page 64

    4-22 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 4 Building the Lighting Assembly Parts Li st Step 20 Join the left, c enter , and righ t Reflector tops with the left and rig ht Reflec tor T ransition pieces. Figur e 4-2 0 Lef t and Righ t Reflect or T r ansition pieces Note Do not tighten scre ws until co mpleting Step 22 . 201 143 21 28 ...

  • Cisco Systems 3200 - page 65

    4-23 Cisco TelePre sence System 3200 OL-14521-01 Chapter 4 Building th e Lighti ng Assemb ly Parts List Step 21 Attach the l eft and righ t (v ertical) Reflec tor en ds to the le ft and right (ve rtical ) Ref lector Bottom ends. Figur e 4-2 1 Lef t and Righ t (v ertic al) Reflect or ends Note Do not tighten scre ws until co mpleting Step 22 . 201 1 ...

  • Cisco Systems 3200 - page 66

    4-24 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 4 Building the Lighting Assembly Parts Li st Step 22 Attach the l eft and r ight c orner Reflecto r T ransition p ieces t o the Reflector tops. Figur e 4-2 2 Lef t and Righ t cor ner Reflect or T ransitio n pieces Note T ighten all scre ws from Figure 4-18 thro ugh Figure 4-2 2 . The g oal i ...

  • Cisco Systems 3200 - page 67

    4-25 Cisco TelePre sence System 3200 OL-14521-01 Chapter 4 Building th e Lighti ng Assemb ly Parts List Step 23 Attach the tw o Metal T rim panels to th e L-brack ets attac hed to the tw o (v ertical) Plastic Dif fuser panels. Figur e 4-2 3 T wo Metal T r im panels Note Install the code cs before you contin ue to the ne xt chapter . See Step 5 thr ...

  • Cisco Systems 3200 - page 68

    4-26 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 4 Building the Lighting Assembly Parts Li st Ti p If requi red, use t he whi te touch- up paint on the lig ht reflec tors to fix any minor cosme tic issue s caused by assembly , shi pping, or handling. ...

  • Cisco Systems 3200 - page 69

    CH A P T E R 6-1 Cisco TelePre sence System 3200 OL-14521-01 6 Building the First Row Table Assembly Revised: July 28 , 2008, OL-14521-0 1 Parts List Key Part Descr iption Part Numbe r Qt y Ctn Notes 1 T ablet op leg base 800-28454- xx 800-28628- xx (left) 3 1 52- 54 52 2 Metal pa ckag ing bra ce 700-24275- xx 4 41- 43, 57 3 Mol ded foam bu mper 80 ...

  • Cisco Systems 3200 - page 70

    6-2 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 6 Building the First Row Table Assemb ly Parts Li st Cautio n The tab le segments are unstabl e during asse mbly . Use cauti on, and suppor t all stru ctures a s require d. War ni n g Only trained and qualified personnel s hould be allowed to install , replace, or service this equipment. Caut ...

  • Cisco Systems 3200 - page 71

    6-3 Cisco TelePre sence System 3200 OL-14521-01 Chapter 6 Buildin g the Firs t Row Table As sembl y Parts List Note Th e direc tions left and right re fer to the a ssembl y as you face it fr om the fro nt. War ni n g T able legs are unst able until they are full y attached to the tabletop. Do not use unattached table l egs as tabletop supports whil ...

  • Cisco Systems 3200 - page 72

    6-4 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 6 Building the First Row Table Assemb ly Parts Li st Step 2 Assemb le the fou r Molded foa m bu mpers and the four T able leg ba ses. Figur e 6-2 F our Mold ed f oam bum pers and the f our T able l eg bases Note The leg base with only one top ri ght attachment brack et is the left most table ...

  • Cisco Systems 3200 - page 73

    6-5 Cisco TelePre sence System 3200 OL-14521-01 Chapter 6 Buildin g the Firs t Row Table As sembl y Parts List Step 3 Assemble th e I/O modu les for th e outside left and outside r ight molde d foam b umpers. The outsi de left an d outside right molde d foam bumpers only have one I/O mod ule eac h. The inner molde d foam b umper s ha v e two (see F ...

  • Cisco Systems 3200 - page 74

    6-6 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 6 Building the First Row Table Assemb ly Parts Li st Step 4 Assemble the I/O modul es for the inner molded foam bumpers. Figur e 6-4 Foa m Bumper Assembly Note St eps f or rou tin g th e Ethe rnet an d power ca bles are in Cha pter 9, “Routing Po wer and Sig nal Cable s. ” Note Th e flang ...

  • Cisco Systems 3200 - page 75

    6-7 Cisco TelePre sence System 3200 OL-14521-01 Chapter 6 Buildin g the Firs t Row Table As sembl y Parts List Step 5 Attach the right win g tabletop sec tion to th e right Acc essory Cabi net bracke t. Figur e 6-5 Right Wing T ablet op Section 201154 15 4 ...

  • Cisco Systems 3200 - page 76

    6-8 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 6 Building the First Row Table Assemb ly Parts Li st Step 6 Attach the ri ght T abl e se gment. a. Make sur e you tighte n the draw b olt evenly on b oth sides . b. While a draw bolt is being t ightene d, hold the tab le edg es togeth er to avoid damage to the d raw bolt or the table s egm en ...

  • Cisco Systems 3200 - page 77

    6-9 Cisco TelePre sence System 3200 OL-14521-01 Chapter 6 Buildin g the Firs t Row Table As sembl y Parts List Step 7 Attach the rig ht most T able L eg. Figur e 6-7 r ight Most T able Leg 15 15 204140 ...

  • Cisco Systems 3200 - page 78

    6-10 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 6 Building the First Row Table Assemb ly Parts Li st Step 8 Attach the cen ter T able seg ment. a. Make sur e you tighte n the draw b olt evenly on b oth sides . b. While a draw bolt is being t ightene d, hold the tab le edg es togeth er to avoid damage to the d raw bolt or the table s egm e ...

  • Cisco Systems 3200 - page 79

    6-11 Cisco TelePre sence System 3200 OL-14521-01 Chapter 6 Buildin g the Firs t Row Table As sembl y Parts List Step 9 Attach the ri ght c enter T able le g. Figu re 6-9 right c enter T a ble leg 15 15 204141 ...

  • Cisco Systems 3200 - page 80

    6-12 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 6 Building the First Row Table Assemb ly Parts Li st Step 10 Attach the l eft T abl e se gment. a. The dra w bolt s ha ve tw o halv es that scr e w into a center p iece. b. While a draw bolt is being t ightene d, hold the tab le edg es togeth er to avoid damage to the d raw bolt or the table ...

  • Cisco Systems 3200 - page 81

    6-13 Cisco TelePre sence System 3200 OL-14521-01 Chapter 6 Buildin g the Firs t Row Table As sembl y Parts List Step 11 Attach the l eft c enter T able le g. Figu re 6-1 1 Left cen ter T able leg 15 15 204143 ...

  • Cisco Systems 3200 - page 82

    6-14 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 6 Building the First Row Table Assemb ly Parts Li st Step 12 Attach the l eft most T able le g. Figur e 6-1 2 lef t Most T able Leg 15 15 204144 ...

  • Cisco Systems 3200 - page 83

    6-15 Cisco TelePre sence System 3200 OL-14521-01 Chapter 6 Buildin g the Firs t Row Table As sembl y Parts List Step 13 Attach on e micr ophone to each table s egm ent. There ar e three micropho nes for the f irst ro w table . The cen ter micro phone cab le for the f irst ro w table mus t be seated in the cable chan nel on th e undersi de of the ce ...

  • Cisco Systems 3200 - page 84

    6-16 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 6 Building the First Row Table Assemb ly Parts Li st Step 14 Attach t he table door to th e tableto p sections a nd attac h the “plea se close ” label to t he under side of the table door . Figur e 6-14 Lef t conne cting T ablet op sect ion 204145 11 15 29 16 30 17 ...

  • Cisco Systems 3200 - page 85

    6-17 Cisco TelePre sence System 3200 OL-14521-01 Chapter 6 Buildin g the Firs t Row Table As sembl y Parts List Step 15 Attach the cen ter Pri vac y pan el. Figur e 6-1 5 Pr ivac y P anel Asse mbly 2 5 Rotated for c larity 201171 ...

  • Cisco Systems 3200 - page 86

    6-18 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 6 Building the First Row Table Assemb ly Parts Li st Step 16 Attach the lef t Pri v acy panel. Figur e 6-1 6 Pr ivac y P anel Asse mbly 1 5 201172 Rotated for c larity ...

  • Cisco Systems 3200 - page 87

    6-19 Cisco TelePre sence System 3200 OL-14521-01 Chapter 6 Buildin g the Firs t Row Table As sembl y Parts List Step 17 Attach the ri ght Priv acy panel. Figur e 6-1 7 Pr iv acy P anel Assembly 3 5 201173 Rotated for c larity ...

  • Cisco Systems 3200 - page 88

    6-20 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 6 Building the First Row Table Assemb ly Parts Li st Step 18 Attach the right win g Priv acy pa nel. Figur e 6-1 8 Pr iv acy P anel Assembly 4 5 201174 ...

  • Cisco Systems 3200 - page 89

    CH A P T E R 7-1 Cisco TelePre sence System 3200 OL-14521-01 7 Building the Second Ro w Table Assembly Revised: July 28 , 2008, OL-14521-0 1 Parts List Key Part Descr iption Part Numbe r Qt y Ctn Notes 1 T ablet op leg base 800-28454- xx 7 52- 54 2 Metal pa ckag ing bra ce 700-24275- xx 7 41- 43, 57 3 Mol ded foam bu mper 800-28625- xx 7 41- 43, 57 ...

  • Cisco Systems 3200 - page 90

    7-2 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 7 Building the Second Row Table Assembly Parts Li st 16 T able top: secti on 3 95-1009 7-01 Kit # 74 -56 01- 01 1 26 17 T able top: secti on 4 95-1009 8-01 Kit # 74 -56 02- 01 1 26 18 T able top: secti on 5 95-9994 -01 Kit # 74 -55 62 2 26 19 T able top en d, l eft ( secti on 6) 95-1009 9-01 ...

  • Cisco Systems 3200 - page 91

    7-3 Cisco TelePre sence System 3200 OL-14521-01 Chapter 7 Building the Seco nd Row Ta ble Assem bly Parts List Cautio n The tab le segments are unstabl e during asse mbly . Use cauti on, and suppor t all stru ctures a s require d. War ni n g Only trained and qualified personnel s hould be allowed to install , replace, or service this equipment. Cau ...

  • Cisco Systems 3200 - page 92

    7-4 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 7 Building the Second Row Table Assembly Parts Li st Cautio n In order to pre vent scratc hing the tabl e tops, you should av oid putt ing any tools on the sh elf surfaces. Note Th e direc tions left and right re fer to the a ssembl y as you face it fr om the fro nt. War ni n g T able legs ar ...

  • Cisco Systems 3200 - page 93

    7-5 Cisco TelePre sence System 3200 OL-14521-01 Chapter 7 Building the Seco nd Row Ta ble Assem bly Parts List Step 2 Assemble the se ven Molded foam b umpers and the se ven T able leg bases. Figur e 7 -2 F our Mold ed f oam bum pers and the f our T able l eg bases 204149 3 37 1 ...

  • Cisco Systems 3200 - page 94

    7-6 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 7 Building the Second Row Table Assembly Parts Li st Step 3 Attach the first set of suppor t brackets for the gutt er and priv acy panel to the t able legs. Note Note the table layout. Ea ch section is numbered as sho wn in Figure 7-3 . E ach ca ble g utter and pr iv acy panel is different. T ...

  • Cisco Systems 3200 - page 95

    7-7 Cisco TelePre sence System 3200 OL-14521-01 Chapter 7 Building the Seco nd Row Ta ble Assem bly Parts List Step 4 Attach th e second set of f iv e support brack ets to the table leg s. Figur e 7 -4 Gut te r and Pr iv ac y P anel Suppor t Br ac k ets, T ype 2 3 5 5 5 204102 5 3 5 3 5 3 5 3 5 5 5 ...

  • Cisco Systems 3200 - page 96

    7-8 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 7 Building the Second Row Table Assembly Parts Li st Step 5 While one or more assista nts k eep th e table le gs stead y , attach t he Sectio n 1 gutt er pan el to th e Section 1 table legs. Ti p When you att ach the sup port brac kets, it can be helpful to turn th e tabl e leg upside-down. F ...

  • Cisco Systems 3200 - page 97

    7-9 Cisco TelePre sence System 3200 OL-14521-01 Chapter 7 Building the Seco nd Row Ta ble Assem bly Parts List Step 6 Attach th e Section 2 gutter panel to the Sect ion 2 table le gs. Figur e 7 -6 Sec tio n 2 Gutter P anel 204104 7 3 5 ...

  • Cisco Systems 3200 - page 98

    7-10 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 7 Building the Second Row Table Assembly Parts Li st Step 7 Attach th e Section 3 gutter panel to the Sect ion 3 table le gs. Figur e 7 -7 Sec tio n 3 Gutter P anel 204105 3 5 8 ...

  • Cisco Systems 3200 - page 99

    7-11 Cisco TelePre sence System 3200 OL-14521-01 Chapter 7 Building the Seco nd Row Ta ble Assem bly Parts List Step 8 Attach th e Section 4 gutter panel to the Sect ion 4 table le gs. Note If you are build ing a Reduc ed Co nfiguration tabl e (four tabl etops i nstea d of six), c ontinu e to Step 11 after completin g this step. Figur e 7 -8 Sec ti ...

  • Cisco Systems 3200 - page 100

    7-12 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 7 Building the Second Row Table Assembly Parts Li st Step 9 Attach the l eft Section 5 gutter panels to the rem aining ta ble le gs. Figur e 7 -9 Section 5 (Lef t) Gut ter P anels 204107 10 3 5 ...

  • Cisco Systems 3200 - page 101

    7-13 Cisco TelePre sence System 3200 OL-14521-01 Chapter 7 Building the Seco nd Row Ta ble Assem bly Parts List Step 10 Attach th e right Se ction 5 g utter panels to the remainin g table l eg s. Figur e 7 -1 0 Section 5 (Right) Gut ter P anels 20410 8 3 5 10 ...

  • Cisco Systems 3200 - page 102

    7-14 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 7 Building the Second Row Table Assembly Parts Li st Step 11 Assemble the I/O modules for the outside left and outside right molded foam b umpers. The outsi de left an d outside right molde d foam bumpers only have one I/O mod ule eac h. The inner molde d foam b umper s ha v e two (see Figur ...

  • Cisco Systems 3200 - page 103

    7-15 Cisco TelePre sence System 3200 OL-14521-01 Chapter 7 Building the Seco nd Row Ta ble Assem bly Parts List Step 12 Assemble the I/O modules for the inne r molded foam b umpers. Note Th e Ether net ca bles are of different lengths. Attach t he Ether net cables to the I/O modul es as foll ows: • Use the 12M cable , 37-0965- 01, for t he I/O mo ...

  • Cisco Systems 3200 - page 104

    7-16 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 7 Building the Second Row Table Assembly Parts Li st Step 13 Inser t the second row PDUs in the l ower cable gutters. Note Y o u install the remain ing PDUs and ro ute the ca bles in Chapter 9, “Ro uting Power and Signal Cables. ” Figur e 7 -13 PDU Cable Routing 55 55 54 54 204171 ...

  • Cisco Systems 3200 - page 105

    7-17 Cisco TelePre sence System 3200 OL-14521-01 Chapter 7 Building the Seco nd Row Ta ble Assem bly Parts List Step 14 Attach the f irst set of floatin g brackets t o the table assembly . Note Be fore you att ach the floating br ackets, ro ute the Etherne t and power cables in Chapter 9, “Rout ing Po wer and Signal Cables. ” Note A fter y ou a ...

  • Cisco Systems 3200 - page 106

    7-18 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 7 Building the Second Row Table Assembly Parts Li st Step 15 Attach th e second set of flo ating br acket s to t he table a ssembly . Note Before you attach the floatin g brackets, ro ute the po wer cable s in Chapter 9, “Routin g Power and Signal Cables. ” Note A fter y ou atta ch t he ...

  • Cisco Systems 3200 - page 107

    7-19 Cisco TelePre sence System 3200 OL-14521-01 Chapter 7 Building the Seco nd Row Ta ble Assem bly Parts List Step 16 Attach the pr iv acy pan el hanger s to the tabl e assemb ly . Figur e 7 -16 Priv acy P anel Han ger 204109 11 3 5 ...

  • Cisco Systems 3200 - page 108

    7-20 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 7 Building the Second Row Table Assembly Parts Li st Step 17 Place the section 1 and sectio n 2 tabletops on the table assemb ly , insert the plastic spline in the slot of table se ction 1, and join the tab les toget her , then insert a nd tight en the d raw b olts e v enly on each side unti ...

  • Cisco Systems 3200 - page 109

    7-21 Cisco TelePre sence System 3200 OL-14521-01 Chapter 7 Building the Seco nd Row Ta ble Assem bly Parts List Step 18 Place the Sec tion 3 tablet op on the ta ble assembly , insert the spline in th e slot betwee n the tw o tabletops, and use the dr aw b olts to join table tops 1 and 3 together . Figur e 7 -18 T abletop Section 3 204112 3 9 40 16 ...

  • Cisco Systems 3200 - page 110

    7-22 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 7 Building the Second Row Table Assembly Parts Li st Step 19 Join table se ction 4 to table sec tion 2 us ing the draw bo lts and spl ine. Note If you are build ing a Reduc ed Co nfiguration tabl e (four tabl etops i nstea d of six), c ontinu e to Step 22 after completin g this step. Figur e ...

  • Cisco Systems 3200 - page 111

    7-23 Cisco TelePre sence System 3200 OL-14521-01 Chapter 7 Building the Seco nd Row Ta ble Assem bly Parts List Step 20 Place the left tab letop sec tion 5 on the tabl e assembly and join it to the sect ion 3 tablet op using the dra w bolts and spline. Figur e 7 -20 T ableto p Sect ion 5 (Left) 204114 3 9 40 1 8 ...

  • Cisco Systems 3200 - page 112

    7-24 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 7 Building the Second Row Table Assembly Parts Li st Step 21 Place the right tab letop sectio n 5 on t he table assembly and join it to the section 4 tabletop. Figur e 7 -21 T abletop Section 5 (Right) 204115 3 9 40 1 8 ...

  • Cisco Systems 3200 - page 113

    7-25 Cisco TelePre sence System 3200 OL-14521-01 Chapter 7 Building the Seco nd Row Ta ble Assem bly Parts List Step 22 Atta ch the left tab letop end t o tableto p section 5 usi ng the using the draw bolts, splin e and alignm ent plat e. Figur e 7 -22 Lef t T ablet op End, Dra w Bolts, Spline an d Alignmen t Plat e 204116 3 9 40 3 4 3 5 19 ...

  • Cisco Systems 3200 - page 114

    7-26 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 7 Building the Second Row Table Assembly Parts Li st Step 23 Atta ch the Right tabl etop en d. Figur e 7 -23 Right T ablet op End 204117 3 9 40 3 4 3 5 20 ...

  • Cisco Systems 3200 - page 115

    7-27 Cisco TelePre sence System 3200 OL-14521-01 Chapter 7 Building the Seco nd Row Ta ble Assem bly Parts List Step 24 Attach tab letop se ctions 1 and 2 to the ta ble l eg. Figur e 7 -24 T ablet op Sect ions 1 and 2 and T able Le g 3 5 3 5 20411 8 ...

  • Cisco Systems 3200 - page 116

    7-28 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 7 Building the Second Row Table Assembly Parts Li st Step 25 Attach tab letop se ctions 1 and 3 to the ta ble l eg. Figur e 7 -25 T ablet op Sect ions 1 and 3 and T able Le g 204119 3 5 3 5 ...

  • Cisco Systems 3200 - page 117

    7-29 Cisco TelePre sence System 3200 OL-14521-01 Chapter 7 Building the Seco nd Row Ta ble Assem bly Parts List Step 26 Attach tab letop se ctions 2 and 4 to the ta ble l eg. Note If you are build ing a Reduc ed Co nfiguration tabl e (four tabl etops i nstea d of six), c ontinu e to Step 30 after completin g this step. Figur e 7 -26 T ablet op Sect ...

  • Cisco Systems 3200 - page 118

    7-30 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 7 Building the Second Row Table Assembly Parts Li st Step 27 Attach tab letop se ctions 3 and 5 to the ta ble l eg. Figur e 7 -27 T ablet op Sect ions 3 and 5 and T able Le g 3 5 3 5 204121 ...

  • Cisco Systems 3200 - page 119

    7-31 Cisco TelePre sence System 3200 OL-14521-01 Chapter 7 Building the Seco nd Row Ta ble Assem bly Parts List Step 28 Attach tab letop se ctions 4 and 5 to the ta ble l eg. Figur e 7 -28 T ablet op Sect ions 4 and 5 and T able Le g 3 5 3 5 204122 ...

  • Cisco Systems 3200 - page 120

    7-32 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 7 Building the Second Row Table Assembly Parts Li st Step 29 Atta ch the re inforc emen t screws for the gutt er pane ls. Figur e 7 -29 Gutter P anel Rein forcemen t Screws 2041 8 2 3 5 3 5 3 5 3 5 ...

  • Cisco Systems 3200 - page 121

    7-33 Cisco TelePre sence System 3200 OL-14521-01 Chapter 7 Building the Seco nd Row Ta ble Assem bly Parts List Step 30 Attach the panel end brace to the table le g and lef t tablet op end an d attach the table le g to the tab letop and table top en d. Figur e 7 -30 P anel End Br aces, T able Le g, Lef t T ablet op End a nd T able Sectio n 5 3 5 3 ...

  • Cisco Systems 3200 - page 122

    7-34 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 7 Building the Second Row Table Assembly Parts Li st Step 31 Atta ch the pa nel end br ace to t he tabl e leg and right t abletop end, then attac h the tab le leg to the tabl etop and table top en d. Figur e 7 -31 P anel End Br aces, T able Le g, Right T ablet op End and T able Sectio n 5 St ...

  • Cisco Systems 3200 - page 123

    7-35 Cisco TelePre sence System 3200 OL-14521-01 Chapter 7 Building the Seco nd Row Ta ble Assem bly Parts List Step 33 Attach the pri vac y panel alignment bra cket to the under side of table section 2. Figur e 7 -33 Sect ion 2 P r iv acy P anel Alignm ent Br ac k et Step 34 Attach the pri vac y panel alignment bra cket to the under side of table ...

  • Cisco Systems 3200 - page 124

    7-36 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 7 Building the Second Row Table Assembly Parts Li st Step 35 Attach the pri vac y panel alignment bra cket to the under side of table section 4. Note If you are build ing a Reduc ed Co nfiguration tabl e (four tabl etops i nstea d of six), c ontinu e to Step 38 after completin g this step. F ...

  • Cisco Systems 3200 - page 125

    7-37 Cisco TelePre sence System 3200 OL-14521-01 Chapter 7 Building the Seco nd Row Ta ble Assem bly Parts List Step 37 Attach the pri vac y panel alignment brack et to the underside of right table section 5. Figur e 7 -37 Right Sect ion 5 Pr iv ac y P anel Alignment Bra ck et 2 8 3 5 2041 3 0 ...

  • Cisco Systems 3200 - page 126

    7-38 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 7 Building the Second Row Table Assembly Parts Li st Step 38 Attach one mi croph one to each tab le seg ment and atta ch the mi crophon e exte nsion cords to the microp hone cabl es. Th ere are six micro phones fo r the secon d row table. Note Step s for rout ing the mic rophon e cable s are ...

  • Cisco Systems 3200 - page 127

    7-39 Cisco TelePre sence System 3200 OL-14521-01 Chapter 7 Building the Seco nd Row Ta ble Assem bly Parts List Step 39 Lift the priv acy panel for t able sect ion 1 in to position until it seats on th e loca ting pins on the t able assembly; then, use th e plastic knob scre ws to loosely attach the pri v acy panel fr om below . Note Do not fully t ...

  • Cisco Systems 3200 - page 128

    7-40 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 7 Building the Second Row Table Assembly Parts Li st Step 40 Attach the pri vac y panel for section 2 to the table assem bly . Note Align the panels so that the seam between pri vac y panels 1 an d 2 is aligned with the tab le top seam for table tops 1 and 2. Figur e 7 -40 Sec ti on 2 Priv a ...

  • Cisco Systems 3200 - page 129

    7-41 Cisco TelePre sence System 3200 OL-14521-01 Chapter 7 Building the Seco nd Row Ta ble Assem bly Parts List Step 41 Attach the pri vac y panel for section 3 to the table assem bly . Figur e 7 -41 Sec ti on 3 Priv acy P anel 29 38 2041 33 ...

  • Cisco Systems 3200 - page 130

    7-42 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 7 Building the Second Row Table Assembly Parts Li st Step 42 Attach the pri vac y panel for section 4 to the table assem bly . Note If you are build ing a Reduc ed Co nfiguration tabl e (four tabl etops i nstea d of six), c ontinu e to Step 45 after completin g this step. Figur e 7 -42 Sec t ...

  • Cisco Systems 3200 - page 131

    7-43 Cisco TelePre sence System 3200 OL-14521-01 Chapter 7 Building the Seco nd Row Ta ble Assem bly Parts List Step 43 Attach the pri vac y panel for left section 5 to the table assembly . Figur e 7 -43 Lef t Section 5 Pr iv ac y P anel 3 1 38 2041 3 5 ...

  • Cisco Systems 3200 - page 132

    7-44 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 7 Building the Second Row Table Assembly Parts Li st Step 44 Attach the pri vac y panel for right section 5 to the table assembly . Figur e 7 -44 Sec ti on 5 Priv acy P anel 3 1 38 2041 3 6 ...

  • Cisco Systems 3200 - page 133

    7-45 Cisco TelePre sence System 3200 OL-14521-01 Chapter 7 Building the Seco nd Row Ta ble Assem bly Parts List Step 45 Adjust panels until all seams betwee n the panels are e ven , then fully tighten the knob screws. Note Star t wi th the s eam betwee n sect ions 1 a nd 2 . The s eam betwee n the table t ops s hould a lign w ith t he seam be twee ...

  • Cisco Systems 3200 - page 134

    7-46 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 7 Building the Second Row Table Assembly Parts Li st Step 46 Attach the cab le cov er for the right en d pri v acy panel. Ti p Install the cab le cov er so that it hides the cab les that come out of the right side of the table section. Figur e 7 -46 Cable Co ve r 20417 3 41 42 ...

  • Cisco Systems 3200 - page 135

    7-47 Cisco TelePre sence System 3200 OL-14521-01 Chapter 7 Building the Seco nd Row Ta ble Assem bly Parts List Step 47 Atta ch the priv acy panel end piec es and t he cable c over for the ri ght en d privac y pane l. Figur e 7 -47 Pr iv ac y P anel End Piec es 204174 3 5 38 3 2 33 3 5 38 ...

  • Cisco Systems 3200 - page 136

    7-48 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 7 Building the Second Row Table Assembly Parts Li st Step 48 Position the second ro w table so that the t railing ed ge of the f irst ro w table is exa ctly 59 inch es (150 cm) behind the l eadi ng ed ge of t he s econd r ow table. Figur e 7 -48 Second Ro w T able P ositioning 59” (150 cm) ...

  • Cisco Systems 3200 - page 137

    CH A P T E R 8-1 Cisco TelePre sence System 3200 OL-14521-01 8 Assembling the Remai ning Cisco TelePresence Elements Revised: July 28 , 2008, OL-14521-0 1 Parts List Key Part Description Part Number Qty Ctn Notes Camera and Camera Assembly 1 Camera assembly 68-3277- xx 1 4 8 M8 x 20 mm p an h ead scr ews 48-2410- xx 4 1 Use d to a ttach t o the Cam ...

  • Cisco Systems 3200 - page 138

    8-2 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 8 Assemblin g the Re mainin g Cisco T elePresen ce Elem ents Parts Li st Codec A ssembly 1 Primary c odec 84-1321- xx 1 3 2 Secondar y code c 68-28 98-xx 2 5, 6, 40 3 Cable ma nageme nt bar 700-2 3449-x x 3 3, 5, 6, 40 4 Codec a ttachm ent br ackets 700-2 3342-x x 6 13 5 M4 x 12 mm s crews 48 ...

  • Cisco Systems 3200 - page 139

    8-3 Cisco TelePre sence System 3200 OL-14521-01 Chapter 8 Assembl ing the Re maining Ci sco TelePrese nce Elem ents Parts List Note Note that th e ke y numbers res tart fo r each elemen t. War ni n g Only trained and qualified personnel s hould be allowed to install , replace, or service this equipment. Note Th e direc tions left and right re fer t ...

  • Cisco Systems 3200 - page 140

    8-4 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 8 Assemblin g the Re mainin g Cisco T elePresen ce Elem ents Parts Li st Step 1 Place the ass embly o v er the cent er displ ay , then attach the Camer a Assembly to the Camera Assembly bracket . For clarity , the di splay has be en remo v ed from the illustrati on in Figure 8- 1 . Note Th er ...

  • Cisco Systems 3200 - page 141

    8-5 Cisco TelePre sence System 3200 OL-14521-01 Chapter 8 Assembl ing the Re maining Ci sco TelePrese nce Elem ents Parts List Step 2 Attac h the projec tor to th e projec tor mount ing brac ket. Figur e 8-2 Pr oject or Assem bly 201168 2 1 5 ...

  • Cisco Systems 3200 - page 142

    8-6 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 8 Assemblin g the Re mainin g Cisco T elePresen ce Elem ents Parts Li st Step 3 Attac h the projec tor to th e projec tor mount ing brac ket, and atta ch the asse mbly to the undersi de of the center T abl e se gment. a. Make sure the ce nter M icropho ne cab le is rout ed s ecurely within th ...

  • Cisco Systems 3200 - page 143

    8-7 Cisco TelePre sence System 3200 OL-14521-01 Chapter 8 Assembl ing the Re maining Ci sco TelePrese nce Elem ents Parts List Step 4 Attach th e VGA mod ule to the center T able segme nt. The VGA mod ule suppor ts the VGA peripher al cabl e when not in use. Figur e 8-4 Pr oject or Assem bly 3 201170 ...

  • Cisco Systems 3200 - page 144

    8-8 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 8 Assemblin g the Re mainin g Cisco T elePresen ce Elem ents Parts Li st Step 5 Attach th e Cable man agement ba rs to the th ree Codecs . Figur e 8-5 Codec Ass embly 1 5 3 201175 ...

  • Cisco Systems 3200 - page 145

    8-9 Cisco TelePre sence System 3200 OL-14521-01 Chapter 8 Assembl ing the Re maining Ci sco TelePrese nce Elem ents Parts List Step 6 Attach th e Codec attach ment brackets to the three Cod ecs. Figur e 8-6 Codec Ass embly 201176 1 4 5 6 ...

  • Cisco Systems 3200 - page 146

    8-10 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 8 Assemblin g the Re mainin g Cisco T elePresen ce Elem ents Parts Li st Step 7 Attach the t hree cod ecs to t he dis play str uctur e codec s afety trays . Note If you ordere d a Presen tation Codec with yo ur T elePresence system, re fer to the Cisco T elePr es ence Har dwar e Optio ns and ...

  • Cisco Systems 3200 - page 147

    8-11 Cisco TelePre sence System 3200 OL-14521-01 Chapter 8 Assembl ing the Re maining Ci sco TelePrese nce Elem ents Parts List Step 8 Attach th e Speake r board brack ets and Le veling fee t to the Speak er boa rds. The Spe aker boa rd br ackets sh ould a ngle towards the rear of the Displa y struc ture. Figu re 8-8 Spea ker Asse mbly 201178 7 5 9 ...

  • Cisco Systems 3200 - page 148

    8-12 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 8 Assemblin g the Re mainin g Cisco T elePresen ce Elem ents Parts Li st Step 9 Attach th e Speake r board s to the Speake r board brack ets on the unde rside of the Display shel ve s. Figu re 8-9 Spea ker Asse mbly 201180 6 3 2 ...

  • Cisco Systems 3200 - page 149

    8-13 Cisco TelePre sence System 3200 OL-14521-01 Chapter 8 Assembl ing the Re maining Ci sco TelePrese nce Elem ents Parts List Step 10 Attach th e Speakers to the Speak er boards. Figu re 8-1 0 Sp eaker Asse mb ly 1 6 201 179 ...

  • Cisco Systems 3200 - page 150

    8-14 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 8 Assemblin g the Re mainin g Cisco T elePresen ce Elem ents Parts Li st Step 11 Attach the Pro jector screen to th e Displ ay shelv es. Note Refer to your Cis co T e lePr esen ce P rojec tor Scre en A ssemb ly man ual fo r th e exac t pr oced ures used t o bu ild and attach t he proje ctor ...

  • Cisco Systems 3200 - page 151

    8-15 Cisco TelePre sence System 3200 OL-14521-01 Chapter 8 Assembl ing the Re maining Ci sco TelePrese nce Elem ents Parts List Step 12 Attach the au dio/vi deo extension uni t to its bracket. Figur e 8-1 2 A udio/Vide o Expan sion Unit an d Br ack et 2041 83 2 1 ...

  • Cisco Systems 3200 - page 152

    8-16 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 8 Assemblin g the Re mainin g Cisco T elePresen ce Elem ents Parts Li st Step 13 Attach the audio/ video extension unit to the re ar of the di splay assem bly . Figur e 8-1 3 A udio/Vide o Ext ension U nit 3 5 1 204147 ...

  • Cisco Systems 3200 - page 153

    8-17 Cisco TelePre sence System 3200 OL-14521-01 Chapter 8 Assembl ing the Re maining Ci sco TelePrese nce Elem ents Parts List Step 14 Attach the auxili ary con trol unit to its b racket using 5 mm scr ew s; then, attach th e unit and brack et to the r ear of the d isplay as sembly . Figu re 8-14 Auxilia ry Co ntrol Un it 1 3 5 20414 8 ...

  • Cisco Systems 3200 - page 154

    8-18 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 8 Assemblin g the Re mainin g Cisco T elePresen ce Elem ents Parts Li st Step 15 Assemble the Lar ge Camera T arget. When yo u slide the C amera ta rge t into the fr ame, ma ke sure the t arg et is center ed in the fr ame betw een the ver tical lines at the top and botto m of the targ et. Fi ...

  • Cisco Systems 3200 - page 155

    CH A P T E R 9-1 Cisco TelePre sence System 3200 OL-14521-01 9 Routing Power and Signal Cables Revised: July 28 , 2008, OL-14521-0 1 Parts List Cautio n Do not po wer on the PDUs until all the cab les are routed an d connected. War ni n g Overcurrent protection is provided by branch circuit protection rated 20A. Key Part Description Part Number Qty ...

  • Cisco Systems 3200 - page 156

    9-2 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 9 Routing Power and Sign al Cables Parts Li st War ni n g Output receptacles cannot exceed 15A for any one receptacle. Cautio n Correct routin g of the v arious po wer cords to the appro priate PDU is critical for th e safety and suc cess of the Cisco T elePrese nce System 32 00 assemb ly . E ...

  • Cisco Systems 3200 - page 157

    9-3 Cisco TelePre sence System 3200 OL-14521-01 Chapter 9 Routing Power an d Signal Cables Parts List Step 1 Attach th e two left Po wer Dist ribut ion Units (PDU) to the lef t Accessory cabine t. The acc essory cabinets ea ch have scre w holes for two PDUs on one side wall and scr ew holes for one PDU on the other . When the ca binets are corre ct ...

  • Cisco Systems 3200 - page 158

    9-4 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 9 Routing Power and Sign al Cables Parts Li st Step 2 Attach the ri ght PDU to the right Accesso ry cabin et. The acc essory cabinets ea ch have scre w holes for two PDUs on one side wall and scr ew holes for one PDU on the other . When the ca binets are corre ctly oriented wit h each door op ...

  • Cisco Systems 3200 - page 159

    9-5 Cisco TelePre sence System 3200 OL-14521-01 Chapter 9 Routing Power an d Signal Cables Parts List Step 3 Attach the table as sembly PDU atta chme nt to the cen ter pri vac y pane l. Figur e 9-3 T able assembl y PDU at tachmen t t o the c ent er Pr iv ac y panel Note Th e PDU power cable shoul d extend from the ri ght side. 1 201184 ...

  • Cisco Systems 3200 - page 160

    9-6 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 9 Routing Power and Sign al Cables Parts Li st Step 4 Rout e the po wer c ables for th e f irst r o w tab le assem bly . Figur e 9-4 First Ro w T able Assembly Cable Ro uting Note The six jumper cords fro m the I/O modules in the table le gs route to the cent er PDU. Ti p Before plugging the ...

  • Cisco Systems 3200 - page 161

    9-7 Cisco TelePre sence System 3200 OL-14521-01 Chapter 9 Routing Power an d Signal Cables Parts List Step 5 Rout e the signal cable s for th e f irst r ow micro phones, Cisco Unif ied IP Phone, and (if requi red) Et hernet connect ions in the f irst ro w table. Figur e 9-5 T able assembl y Signal Ca ble Routin g Note Th e T a ble L eg Signal ca bl ...

  • Cisco Systems 3200 - page 162

    9- 8 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 9 Routing Power and Sign al Cables Parts Li st Step 6 Route the se cond row microp hone cabl es. Figur e 9-6 Micr ophone Cable Routi ng 204156 ...

  • Cisco Systems 3200 - page 163

    9-9 Cisco TelePre sence System 3200 OL-14521-01 Chapter 9 Routing Power an d Signal Cables Parts List Step 7 If your insta llation uses wired Eth ernet for the sec ond ro w participants, att ach the Ether net cables to the module s in the foam bumpe rs and rou te th e Ether net ca bles . Figur e 9-7 Ether net Cable Routing 204157 ...

  • Cisco Systems 3200 - page 164

    9-10 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 9 Routing Power and Sign al Cables Parts Li st Step 8 Rout e the po wer cables for the secon d ro w table. Figur e 9-8 Second Ro w T able P ow er Cable Routin g 204172 ...

  • Cisco Systems 3200 - page 165

    9-11 Cisco TelePre sence System 3200 OL-14521-01 Chapter 9 Routing Power an d Signal Cables Parts List Step 9 Connect th e Cisco Unified IP Phone , VGA periphera l, and proje ctor HD vi deo cabl es. Note Th e VGA Pe riphe ral c able is the free- hanging cabl e re sting in the VG A modul e at tached to th e ce nter Ta b l e s e g m e n t . Figur e 9 ...

  • Cisco Systems 3200 - page 166

    9-12 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 9 Routing Power and Sign al Cables Parts Li st Step 10 Atta ch the mic rophone cable s to the audi o/vid eo exten sion uni t. Note If you have a Reduced Con figuration for your seco nd row table (four tab letops inste ad of six), use th e same con nections, but omit the co nnection s (whi te ...

  • Cisco Systems 3200 - page 167

    9-13 Cisco TelePre sence System 3200 OL-14521-01 Chapter 9 Routing Power an d Signal Cables Parts List Step 11 Attach and r oute the cable s for the speak ers. Figur e 9-1 1 Cabling the Speak ers Note Figur e 9-11 displ ays the re ar view of the Cisco T e lePresenc e System 320 0. Left a nd right are reversed. Ti p Befo re plu gging cabl es int o t ...

  • Cisco Systems 3200 - page 168

    9-14 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 9 Routing Power and Sign al Cables Parts Li st Step 12 Connec t t he f ollo wing ca bles : • At tach and rout e the po wer cables for the lighting assem bly by conne cting the lights to the au xiliary contro l unit. • C onnec t the seria l cable be tween the projec tor and the au xiliar ...

  • Cisco Systems 3200 - page 169

    9-15 Cisco TelePre sence System 3200 OL-14521-01 Chapter 9 Routing Power an d Signal Cables Parts List Ti p Before p luggin g the Ligh t fixture power cables int o the u nit, l abel ea ch one. For example , 5’ Left ligh t, 4’ Righ t light. Step 13 Attach and r oute the po wer and signal cab les for the plasma dis plays . Figur e 9-1 3 Cabling t ...

  • Cisco Systems 3200 - page 170

    9-16 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 9 Routing Power and Sign al Cables Parts Li st Step 14 Attach and r oute the po wer- ov er -Ether net and HD V ideo ca bles for th e cam era. Figur e 9-1 4 Cabling t he Came ra As sembly Note The came ra c luster can e xperien ce rad io f reque ncy interf erence issu es if the cam era Ethern ...

  • Cisco Systems 3200 - page 171

    9-17 Cisco TelePre sence System 3200 OL-14521-01 Chapter 9 Routing Power an d Signal Cables Parts List Step 15 Attach the cab les betwe en the codecs. Note If you ordere d a Presen tation Codec with yo ur T elePresen ce system , refe r to the Cis co T elePr esence Har dwar e Optio ns and Upgr ade Guid e for cabli ng ins tructio ns fo r the p resent ...

  • Cisco Systems 3200 - page 172

    9-18 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 9 Routing Power and Sign al Cables Parts Li st Note Figur e 9-15 displ ays the re ar view of the Cisco T e lePrese nce System 320 0. Lef t and right ar e reversed. Step 16 Connect t he p o wer c ables for the codecs . Figur e 9-1 6 Cabling t he Codecs Po w e r 204167 ...

  • Cisco Systems 3200 - page 173

    9-19 Cisco TelePre sence System 3200 OL-14521-01 Chapter 9 Routing Power an d Signal Cables Parts List Step 17 (Opti onal) I f your inst allatio n uses an op tional external disp lay or a doc umen t camera , install and rou te the cabl ing. Figur e 9-1 7 Cabling Diagr a m: CTS-3200 Insta llations with a n Ext er nal Display and Documen t Camer a 20 ...

  • Cisco Systems 3200 - page 174

    9-20 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 9 Routing Power and Sign al Cables Parts Li st Step 18 (Opti onal) If your inst allation uses an extern al displ ay or a doc ument ca mera w ith a prese ntation codec, install and route th e cabling. Refer to the “Options f or the Cisco T elePresen ce System 3200 ” chapter o f the Cisco ...

  • Cisco Systems 3200 - page 175

    9-21 Cisco TelePre sence System 3200 OL-14521-01 Chapter 9 Routing Power an d Signal Cables Parts List ...

  • Cisco Systems 3200 - page 176

    9-22 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 9 Routing Power and Sign al Cables Parts Li st ...

  • Cisco Systems 3200 - page 177

    CH A P T E R 10-1 Cisco TelePre sence System 3200 OL-14521-01 10 Firs t-Time Setup Revised: February 6, 200 9, OL-14521-01 After you have assembled t he Cisco T elePr esence Sy stem (C TS), you set up the in dividual system compone nts (such as displays a nd camera s) usin g Hardware S etup , locat ed under T roubleshooting in the CTS Administrati ...

  • Cisco Systems 3200 - page 178

    10-2 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 10 Firs t-Time S etup Loading CTS Admi nistration Software Note M ake sure that you p ower on all codecs withi n 30 second s to avoid power on detectio n failu re. After yo u turn on the co decs, th e displa ys associa ted with each codec bec omes acti ve. CTS displ ays green ch eck marks on ...

  • Cisco Systems 3200 - page 179

    10-3 Cisco TelePre sence System 3200 OL-14521-01 Chapter 1 0 First-Time Setup Loading CTS Administration Software Figur e 1 0-2 S yst em IP A ddress Note Not e If the IP a ddress that displays i s 192.1 68.100.2, the CTS-320 0 coul d not conta ct the DH CP server or your system doe s not use DH CP . If you r network does not use DHCP , na vigate to ...

  • Cisco Systems 3200 - page 180

    10-4 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 10 Firs t-Time S etup Configuring an A lternate TF TP Server (Op tional) Step 6 From the Cisco IP te lephone welco me pag e, pre ss Next . The system r eboots. Note Th e system migh t reboot sev eral times duri ng the initi al start up process. Step 7 Open a browser on a com puter that is co ...

  • Cisco Systems 3200 - page 181

    10-5 Cisco TelePre sence System 3200 OL-14521-01 Chapter 1 0 First-Time Setup Set ting Up CTS Com ponen ts Step 1 Using the IP ad dress displa yed in the Cisco IP tel ephone welcome messa ge, log in to the CTS Admi nist rati on so ftwa re. Step 2 From T roubleshooting , choose Hard war e Se tup to initially set up th e compon ents in th e Cisco T e ...

  • Cisco Systems 3200 - page 182

    10-6 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 10 Firs t-Time S etup Setting Up CTS Components Troub lesho otin g Disp lays Use Ta b l e 10-1 t o tro ubleshoo t probl ems w ith the imag es on the disp lays. Setting Up the Camer as The cam eras are set up co rre ctly when ima ges are cent ered an d in f ocu s on the disp lay s cree ns and ...

  • Cisco Systems 3200 - page 183

    10-7 Cisco TelePre sence System 3200 OL-14521-01 Chapter 1 0 First-Time Setup Set ting Up CTS Com ponen ts Attach the Cam era Ta rgets T wo camer a targets are provide d with the Cisco T elePresen ce system : a lar ge white targ et and a sma ller tar get. Y ou attac h the larg e white targ et to t he tabl e prior to performin g Auto Adju st (white ...

  • Cisco Systems 3200 - page 184

    10-8 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 10 Firs t-Time S etup Setting Up CTS Components Figur e 1 0-3 Camer a Mounting Plat e 201205 Up/down scre w Left/right screws Rotation screws Lens ...

  • Cisco Systems 3200 - page 185

    10-9 Cisco TelePre sence System 3200 OL-14521-01 Chapter 1 0 First-Time Setup Set ting Up CTS Com ponen ts Figur e 1 0-4 Cor rect Camer a T ar g et Alignment—Cent er Display Figur e 1 0-5 Cor rect Camer a T ar get Alig nment—Right Di splay Red plu s s ign within bl a ck cro ss Red line s Note cur ved line s touching s creen border T a bl e edge ...

  • Cisco Systems 3200 - page 186

    10-10 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 10 Firs t-Time S etup Setting Up CTS Components Figur e 1 0-6 Cor rect Ca mer a T arg et Alignment—Lef t Display • Clic k Hid e Came ra T arge t to rem ov e the alignmen t image s. • Clic k Done when you complet e the adjustment . Show All C amer a Targ ets • Clic k Show Al l Camera ...

  • Cisco Systems 3200 - page 187

    10-11 Cisco TelePre sence System 3200 OL-14521-01 Chapter 1 0 First-Time Setup Set ting Up CTS Com ponen ts Figur e 1 0-7 At tachi ng the Cam era Hood Assembly Troub lesho otin g Came ras Use Ta b l e 10-2 t o tro ubleshoo t proble ms with camer as. 201203 7 7 2 1 3 ...

  • Cisco Systems 3200 - page 188

    10-12 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 10 Firs t-Time S etup Setting Up CTS Components Ta b l e 1 0-2 T roublesho oting Char t for Camer a Pro blems Prob lem Possible Cause Action Cisco TelePresence 3000/3200 only Camera image appe ars on the wrong display . Cables ar e plug ged into the wrong c onnect or po rts. Chec k that the ...

  • Cisco Systems 3200 - page 189

    10-13 Cisco TelePre sence System 3200 OL-14521-01 Chapter 1 0 First-Time Setup Set ting Up CTS Com ponen ts Setting Up the Sp eakers The speake rs are set up co rrect ly you can hear sound clea rly from ea ch one . Y ou ca n choose whe ther you want to cycle thr ough the spe akers aut omatic ally or manual ly . • Clic k Speaker s on the Hardware ...

  • Cisco Systems 3200 - page 190

    10-14 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 10 Firs t-Time S etup Setting Up CTS Components • Clic k Refr esh Micr ophones Status (CTS-3200s on ly) to upda te the on/o ff status of all microphon es. • Clic k Stop whe n s etu p is co mp let e. Troub lesho oting Mi cropho nes Use Ta b l e 10-4 t o tro ubleshoo t probl ems w ith mic ...

  • Cisco Systems 3200 - page 191

    10-15 Cisco TelePre sence System 3200 OL-14521-01 Chapter 1 0 First-Time Setup Set ting Up CTS Com ponen ts Step 1 Make sure tha t a seria l cabl e is connec ted from your pr ojec tor to the Serial output of the au xiliary cont rol unit. See Chapter 9, “R outing Power and Si gnal Ca bles” for i nform ation about c ablin g your system w ith an A ...

  • Cisco Systems 3200 - page 192

    10-16 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 10 Firs t-Time S etup Setting Up CTS Components Completing th is step should center the image in the scr een. If the image is not cente red, adjust the image unti l the distance is equal fr om each table segm ent seam. e. Mov e the switch to the lo ck position . Step 7 Aim the remote co ntr ...

  • Cisco Systems 3200 - page 193

    10-17 Cisco TelePre sence System 3200 OL-14521-01 Chapter 1 0 First-Time Setup Set ting Up CTS Com ponen ts Note Th e Cisco T e lePresence System can displa y information from mult iple input de vices during a meeting; if multiple inp ut dev ices are sending informati on, the projec tor displays the input fr om the last present ation d evice sendin ...

  • Cisco Systems 3200 - page 194

    10-18 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 10 Firs t-Time S etup Setting Up CTS Components Other Devices Use Other D evices to check the Auxili ary Control Unit, which con trols the indi vidual lig ht units surrounding the di splays in CTS confe rence rooms an d enabl es the CT S to get m ore com plete pr ojector status informatio n ...

  • Cisco Systems 3200 - page 195

    CH A P T E R 11-1 Cisco TelePre sence System 3200 OL-14521-01 11 Use & C are Guide Revised: July 28 , 2008, OL-14521-0 1 Maintaining the Tabletop Cleani ng yo ur woo d surf aces T o avoid the build-up of dirt , dust al l wood surfaces on a r egular bas is. This should be d one with a soft, lint free clot h, slightly moistened with w ater only . ...

  • Cisco Systems 3200 - page 196

    11-2 Cisco Tele Presence Syste m 3200 OL-14521-01 Ch apter 1 1 U se & Car e Gui de Cleaning the Camer a lens Cleaning the Camera lens Cautio n Do not touch the ca mera after installat ion is compl eted. If you ne ed to clean the ca mera len s, use a d ry micro fib er clot h. Afte r cleaning , you will need to reali gn the cam era. Maintaining t ...

  • Cisco Systems 3200 - page 197

    CH A P T E R 12-1 Cisco TelePre sence System 3200 OL-14521-01 12 Field-Replaceable Unit Guid e Revised: July 28 , 2008, OL-14521-0 1 This chap ter de scribe s the steps you perfo rm to rep lace the field -repla ceabl e units (FR Us) for the Cisco T elePres ence system and includ es the follo wing sections: • Powering On the System , page 12-1 • ...

  • Cisco Systems 3200 - page 198

    12-2 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 12 Field-Replaceable Un it Guide Replacing the Camera Cl uster—Part Numbe r CTS3K-CAM-CLST-G 2 b. Change the de vi ce MA C addres s to the MA C address fo r the ne w primary c odec. T he M A C a ddress should be displa yed on the c odec. Step 2 Po wer on the Cisco T elePresenc e 3200 by tu ...

  • Cisco Systems 3200 - page 199

    12-3 Cisco TelePre sence System 3200 OL-14521-01 Chapter 1 2 Field-Replace able Unit Guide Repl acing the Cam era Cl uster— Part N umber CTS3K- CAM-CL ST-G 2 • Po wer scre wdri v er w ith 2. 5, 3, and 6 mm (s tand ard o r roun d) Al len b its , or stand ard 2.5, 3, and 6 mm Allen w renche s • 0.9mm Alle n wren ch for camer a lens adj ustments ...

  • Cisco Systems 3200 - page 200

    12-4 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 12 Field-Replaceable Un it Guide Replacing a Plasma D isplay—Part Number CTS-DISP-65-GEN2 Step 7 Reattac h the Ether net and sig nal cab les acco rding to yo ur tempor ary ma rkings. Do not attach th e came ra hoods a t this time. Step 8 Po wer on the system by complet ing the steps in the ...

  • Cisco Systems 3200 - page 201

    12-5 Cisco TelePre sence System 3200 OL-14521-01 Chapter 1 2 Field-Replace able Unit Guide Repl acing a Plas ma Display— Par t Num ber CT S-DISP- 65-GE N2 • Laptop com puter atta ched to ne twork • * Step ladder * Recomme nded for be st results Removin g Audio C omponents Cautio n T ake care not to m ar o r introd uce smudges o r di rt to the ...

  • Cisco Systems 3200 - page 202

    12-6 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 12 Field-Replaceable Un it Guide Replacing a Plasma D isplay—Part Number CTS-DISP-65-GEN2 Remov ing the C amera Cl uster If you ar e re placing the center Pl asma di splay , you must r emove the came ra cl uster . Refer to the previous section, Removing a nd Re placing the C amera Cluster ...

  • Cisco Systems 3200 - page 203

    12-7 Cisco TelePre sence System 3200 OL-14521-01 Chapter 1 2 Field-Replace able Unit Guide Repl acing a Plas ma Display— Par t Num ber CT S-DISP- 65-GE N2 Removin g the Dis play Scre en and Comp leting the Proc edure Step 1 Detach th e display s creen’ s signal cabl e from the cor rect cod ec unit. See Chapter 9 , “Routing Power and Signal Ca ...

  • Cisco Systems 3200 - page 204

    12-8 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 12 Field-Replaceable Un it Guide Replacing a Speake r—Part Number CTS- LDSPKR Step 19 Perform the display adjustme nt proce dure. See the “Set ting Up the Disp lays” sect ion on page 10-5 for mor e inform atio n. Step 20 If you m ov ed the camera, complete the follo wing steps: a. Perf ...

  • Cisco Systems 3200 - page 205

    12-9 Cisco TelePre sence System 3200 OL-14521-01 Chapter 1 2 Field-Replace able Unit Guide Replacin g a Speake r—Par t Number CTS-LDS PKR • The auxilia ry cont rol unit on the c enter disp lay struct ure Cautio n Make sure all system po wer is turned off befor e be ginning this d isassembly . Step 2 Remo ve the Projec tor screen b y performing ...

  • Cisco Systems 3200 - page 206

    12-10 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 12 Field-Replaceable Un it Guide Replacing a Codec Uni t—Part Nu mber CTS-CODEC-PRI -G2 (Primary Codec) or CTS- CODEC-SEC (Secon dary Codec) Replacing a Codec Unit—Part Nu mber CT S-CODEC-PR I-G2 (Primary Codec) or CTS-CODEC-SEC (Second ary Codec) Required Info rmation, Tools, and Equip ...

  • Cisco Systems 3200 - page 207

    12-11 Cisco TelePre sence System 3200 OL-14521-01 Chapter 1 2 Field-Replace able Unit Guide Repl acin g a Code c Unit—Pa rt Num ber CTS -CODEC-P RI-G2 (P rimary C odec) or CT S-CODEC- SEC (Secon dary Cod ec) Step 6 Remove the co dec from t he Disp lay str uctur e. Step 7 Remo v e the L brack ets fro m the codec. See Chapter 8, “ Assembling th e ...

  • Cisco Systems 3200 - page 208

    12-12 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 12 Field-Replaceable Un it Guide Replacing a Micr ophone —Part Numbe r CTS-MIC Replacing a Micro phone—Part Number CTS-MIC Required Info rmation, Tools, and Equipmen t T o remo ve an d replac e a micro phone for the Cisco T elePr esence 320 0, you ne ed the follo wing inform ation, tool ...

  • Cisco Systems 3200 - page 209

    12-13 Cisco TelePre sence System 3200 OL-14521-01 Chapter 1 2 Field-Replace able Unit Guide Replac ing a Micr ophone —Part Nu mber CTS -MIC Step 7 Pull the c able out thr ough the hole and se t the m icropho ne asi de. Note If you are replac ing a micro phone i n the secon d row , you must also remove the pr i vacy panel for that Step 8 Pull the ...

  • Cisco Systems 3200 - page 210

    12-14 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 12 Field-Replaceable Un it Guide Replacing a Lig ht Fixture— Part Numb er CTS-LIGH T-FI XT Step 8 Attach th e pri v acy pan els to the table sections. Note If requir ed, a dju st t he privacy panel s ecti ons so th at t her e is an eq ual amou nt of s pac e betw een each se ction. Step 9 ...

  • Cisco Systems 3200 - page 211

    12-15 Cisco TelePre sence System 3200 OL-14521-01 Chapter 1 2 Field-Replace able Unit Guide Replac ing the Aud io/Vide o Ext ension Unit—Part Number CTS-AV- EXP Replacing a Light Fi xture Step 1 Po wer of f the Auxiliary Control U nit by turning the po wer switch to th e Of f positio n. Note The Auxiliary Con trol Unit is located in the center of ...

  • Cisco Systems 3200 - page 212

    12-16 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 12 Field-Replaceable Un it Guide Replacing the A uxiliary Cont rol Unit— Part Numb er CTS-LIGHT-C TRL Cautio n Make sure all system po wer is turned off befor e be ginning this d isassembly . Step 2 Remove the cables from the audio/ video extension u nit. La bel eac h ca ble wi th ma skin ...

  • Cisco Systems 3200 - page 213

    12-17 Cisco TelePre sence System 3200 OL-14521-01 Chapter 1 2 Field-Replace able Unit Guide Replacing the Cisco Unified IP Phone—Part Number CP-7975G-CTS Step 5 Attach the cab les to the ne w au xiliary co ntrol u nit usin g the ma sking tape l abels as a guide . Step 6 Po wer on the system by complet ing the steps in the “Powering On the Sy st ...

  • Cisco Systems 3200 - page 214

    12-18 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 12 Field-Replaceable Un it Guide Replacing the Pro jector—Part N umber CTS-PRJTR-G EN1 Step 5 Remov e the projector assembly by sliding the unit to the front unti l the projector mounting brac ket disengag es fr om the loosen ed m ountin g scr ews. Step 6 Loosen the scre w that sec ures t ...

  • Cisco Systems 3200 - page 215

    12-19 Cisco TelePre sence System 3200 OL-14521-01 Chapter 1 2 Field-Replace able Unit Guide Replac ing a PDU—P art Num ber CT S-PWR- PDU Step 10 Reattach the po wer cable to the projector . Step 11 Reattach the ser ial cable to the auxili ary control unit. Step 12 Power on the proj ector by turn ing on the power switc h loc ated on the ba ck of t ...

  • Cisco Systems 3200 - page 216

    12-20 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 12 Field-Replaceable Un it Guide Replacing a Displ ay Shelf Note If your a dministr ator h as ch anged t he use r na me or p assword, e nter those values. Step 10 Click Login . Step 11 V erify the status of the Cisco Unif ied Communic ations Manager (seen in the low er left portion of the w ...

  • Cisco Systems 3200 - page 217

    12-21 Cisco TelePre sence System 3200 OL-14521-01 Chapter 1 2 Field-Replace able Unit Guide Rep laci ng a Dis play She lf Be careful not to mar the scr een when you perfor m this step. b. Use an ope n-end ed wrench to lo osen th e feet on th e bottom of th e screen, an d lo wer th e screen . c. After yo u ha ve cr eated a g ap of appro ximatel y 1/ ...

  • Cisco Systems 3200 - page 218

    12-22 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 12 Field-Replaceable Un it Guide Replacing a First Row Table To p Section Ti p The pr oject or scre en c omes w ith pr inted i nstruc tions tha t s hould a ssist yo u with repla cing it . If yo u cannot f ind the instruct ions, re v erse the order of remo v al to install it. Step 19 Po wer ...

  • Cisco Systems 3200 - page 219

    12-23 Cisco TelePre sence System 3200 OL-14521-01 Chapter 1 2 Field-Replace able Unit Guide Replacin g a First R ow Table T op Secti on Note Make sure th at the leg still support s both table top sections. Step 8 Remove the draw bolts betwe en the tab le top sect ions on the side that you moved. See Ch apter 6, “Building the First Ro w T able Ass ...

  • Cisco Systems 3200 - page 220

    12-24 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 12 Field-Replaceable Un it Guide Replacing a Second Row Table To p Section Replacing a Sec ond Row Table Top Section Complet e the se step s to r eplace a seco nd ro w table top section . Required Info rmation, Tools, and Equipmen t T o remo ve an d replac e a second ro w table top, you nee ...

  • Cisco Systems 3200 - page 221

    12-25 Cisco TelePre sence System 3200 OL-14521-01 Chapter 1 2 Field-Replace able Unit Guide Repla cing a Se cond R ow Table Top Sect ion Step 6 If you are repla cing t he le ft or righ t tabl etop e nd, r emove the p riv acy panel e nd pie ce and panel end brace. Se e Figur e 7-47 for the priv a cy panel end piece location s and Figure 7-30 for the ...

  • Cisco Systems 3200 - page 222

    12-26 Cisco Tele Presence Syste m 3200 OL-14521-01 Chapter 12 Field-Replaceable Un it Guide Replacing a Second Row Table To p Section Step 20 Place the splines in the slots on the edge of the ne w table top section. Step 21 Press th e table t op sec tions together . Step 22 Insert the dra w bolts and tighten the m between the ne w table to p sectio ...

  • Cisco Systems 3200 - page 223

    A- 1 Cisco TelePr esence Syste m 3200 OL-14521-01 APPENDIX A Appendix A: Parts List Sorted by Carton Revised: July 28 , 2008, OL-14521-0 1 Overview • Each tab le repr esent s a separ ate cart on. • Each carto n may contain multiple parts. Some of these part s are grouped together in kits. Each kit is a sm alle r box contai ned wi thin a larger ...

  • Cisco Systems 3200 - page 224

    A- 2 Cisco Tele Presence Syste m 3200 OL-14521-01 Appendix A Appendix A: Part s List Sorted by Carton Carton 1 of 58: Mechanica l Access ory Kit, CTS3K -ACC-KIT , 53-2855-xx 78-1 7839-0 4 Regula tory Compliance and Safety Inf ormation 1 N/A 78-1 8735-0 1 Cisco T elePresence Sy stem 32 00 Assem bly , Use & Care , and Field R eplace ment Unit Gui ...

  • Cisco Systems 3200 - page 225

    A-3 Cisco TelePr esence Syste m 3200 OL-14521-01 Append ix A Appendi x A: Parts List Sorted by Cart on Carton 2 of 58: Mechanical Ac cessory Kit, 53- 2855-xx, CTS3K- ACC2-KIT Carton 2 of 58: Mechani cal Accessory Kit, 53-2855-x x, CTS3K-ACC 2-KIT Carton 3 of 58: Primary Codec , CTS-CODEC-PRI-G2, 800-30638-xx 800-304 42-0 1 73-1160 9-02 CTS -A V -EX ...

  • Cisco Systems 3200 - page 226

    A- 4 Cisco Tele Presence Syste m 3200 OL-14521-01 Appendix A Appendix A: Part s List Sorted by Carton Carton 4 of 58: Camera Cluster, 800-30872-xx, CTS3K-CA M-CLST-G2 Carton 4 of 58: Camera Cluster, 800-30872-xx, CTS3K-CAM- CLST-G2 Carton 5 of 58: Secondary Cod ec, 800-28202-xx , CTS-CODEC-SEC Carton 6 of 58: Secondary Cod ec, 800-28202-xx , CTS-CO ...

  • Cisco Systems 3200 - page 227

    A-5 Cisco TelePr esence Syste m 3200 OL-14521-01 Append ix A Appendi x A: Parts List Sorted by Cart on Carton 8 of 58: Speake r, 74-4740-x x, CTS-LDSPKR Carton 8 of 58: Speaker, 74-4740-xx, CT S-LDSPKR Carton 9 of 58: Speaker, 74-4740-xx, CT S-LDSPKR Carton 10 of 58: Speaker, 74-4740-xx, CT S-LDSPKR Carton 11 of 58: Power Cord, 37- 08xx-xx, PWR- CO ...

  • Cisco Systems 3200 - page 228

    A- 6 Cisco Tele Presence Syste m 3200 OL-14521-01 Appendix A Appendix A: Part s List Sorted by Carton Carton 12 of 58: Camera Assembly Brack et, 69-1627-xx, CTS3K-STRUCTU RE Carton 12 of 58: Camera Assembly Bracke t, 69-1627-xx, CTS3K-STRU CTURE Carton 13 of 58: Brackets, 69-1632-xx, CTS3K-STRUCTURE Carton 14 of 58: Privacy Panel, Right Wing, 69-16 ...

  • Cisco Systems 3200 - page 229

    A-7 Cisco TelePr esence Syste m 3200 OL-14521-01 Append ix A Appendi x A: Parts List Sorted by Cart on Carton 16 of 58: Front Foot Stabiliz er, 69-1624-xx, CST3K-S TRUCTURE Carton 16 of 58: Front Foot Stabilizer, 69-1624-xx, CST3K-STRU CTURE Carton 17 of 58: Front Foot Stabilizer, 69-1624-xx, CST3K-STRU CTURE Carton 18 of 58: Display Structure Rear ...

  • Cisco Systems 3200 - page 230

    A- 8 Cisco Tele Presence Syste m 3200 OL-14521-01 Appendix A Appendix A: Part s List Sorted by Carton Cart on 2 0 of 58: Acc essor y Kit f or CTS- 3200 , 53- 3108-x x, CTS3 2-ACC- KIT Carton 20 of 58: Accessory Kit for CTS-3200, 53-3108-xx, CTS32- ACC-KIT Carton 22 of 58: Auxiliary Control Unit, CTS-LIGHT-CTRL Carton 23 of 58: Plasma Displa y, 74-4 ...

  • Cisco Systems 3200 - page 231

    A-9 Cisco TelePr esence Syste m 3200 OL-14521-01 Append ix A Appendi x A: Parts List Sorted by Cart on Carton 24 o f 58: Plasma Displa y, 74-4881-xx, CTS -DISP-65-GEN2 Carton 24 of 58: Plasma Displa y, 74-4881-xx, CTS-DISP-65-GEN2 Carton 25 of 58: Plasma Displa y, 74-4881-xx, CTS-DISP-65-GEN2 Carton 26 of 58: Second Ro w Tableto ps and Ac cessory K ...

  • Cisco Systems 3200 - page 232

    A-10 Cisco Tele Presence Syste m 3200 OL-14521-01 Appendix A Appendix A: Part s List Sorted by Carton Cart on 2 7 of 58: Li ght Fixtu re, 74-5361 -xx, CTS- LIGHT -FIX T Carton 27 of 58: Light Fixture, 74-5361-xx, CTS-LIGHT-FIXT Carton 28 of 58: Light Fixture, 74-5361-xx, CTS-LIGHT-FIXT Carton 29 of 58: Light Fixture, 74-5361-xx, CTS-LIGHT-FIXT Kit ...

  • Cisco Systems 3200 - page 233

    A-11 Cisco TelePr esence Syste m 3200 OL-14521-01 Append ix A Appendi x A: Parts List Sorted by Cart on Carton 30 of 58: Ligh t Fixture, 74-5362-xx, CTS-LIGHT-FIXT Carton 30 of 58: Light Fixture, 74-5362-xx, CTS-LIGHT-FIXT Carton 31 of 58: Light Fixture, 74-5362-xx, CTS-LIGHT-FIXT Carton 32 of 58: Camera Target, 69-1674-xx, CTS-CAM-TOOL Kit ID Numb ...

  • Cisco Systems 3200 - page 234

    A-12 Cisco Tele Presence Syste m 3200 OL-14521-01 Appendix A Appendix A: Part s List Sorted by Carton Carton 33 of 58: Support Crossbars , 69-1623-01, CTS3K-S TRUCTURE Carton 33 of 58: Support Cross bars, 69-1623-01, CTS3K-STRU CTURE Carton 34 of 58: Privacy Panel s, 69-1629-xx, CTS3K-STRUCTURE Carton 35 of 58: Display Structure, 69-1622-xx, CTS3K- ...

  • Cisco Systems 3200 - page 235

    A-13 Cisco TelePr esence Syste m 3200 OL-14521-01 Append ix A Appendi x A: Parts List Sorted by Cart on Carton 37 of 58: Disp lay Structure , 69-1622-xx, CTS 3K-STRUCTURE Carton 37 of 58: Display Structure, 69-1622-xx, CTS3K-STRU CTURE Carton 38 of 58: Presentation Codec, 69-1887-xx, CTS-HFR-COLLAB-3K Note The presentation codec is an option for th ...

  • Cisco Systems 3200 - page 236

    A-14 Cisco Tele Presence Syste m 3200 OL-14521-01 Appendix A Appendix A: Part s List Sorted by Carton Carton 40 of 58: Second ary Code c, 800-28202- xx, CTS-CODEC-SE C Carton 40 of 58: Secondary Cod ec, 800-28202-xx, CTS-CODEC-SEC Carton 41 of 58: Foam Bumper s, 69-1634-xx, CTS3K-STRUCTURE Carton 42 of 58: Foam Bumper s, 69-1634-xx, CTS3K-STRUCTURE ...

  • Cisco Systems 3200 - page 237

    A-15 Cisco TelePr esence Syste m 3200 OL-14521-01 Append ix A Appendi x A: Parts List Sorted by Cart on Carton 44 of 58: Lighting Assembly, 69-1613-xx, C TS3K-LIGHT-STR Carton 44 of 58: Lighting Assembly, 69-1613-xx, CTS3K- LIGHT- STR Carton 45 of 58: Projector Bracket, 69-1631-xx, CTS3K-STRU CTURE Carton 46 of 58: Projector Screen, 74-5416-xx, CTS ...

  • Cisco Systems 3200 - page 238

    A-16 Cisco Tele Presence Syste m 3200 OL-14521-01 Appendix A Appendix A: Part s List Sorted by Carton Carton 48 of 58 : Accessory Cabine t, Left, 69- 1838-xx, CTS3K-M-TAB LE-G2 Carton 48 of 58: Accessory Cabinet, Left, 69-1838-xx, CTS3K-M-TABLE-G 2 Carton 49 of 58: Lighting Assembl y, 69-1612-xx, CTS3K- LIGHT- STR Kit ID Number Sub-Kit ID Numbe r P ...

  • Cisco Systems 3200 - page 239

    A-17 Cisco TelePr esence Syste m 3200 OL-14521-01 Append ix A Appendi x A: Parts List Sorted by Cart on Carton 50 of 58: Cisco TelePresen ce 3200 Structur e—Ad dition to Standar d CTS-3000, CTS32-STRUCTURE, 69-1854-01 Carton 50 of 58 : Cisco TelePresence 3200 Structu re—Addition to Standard CTS-3000, CTS32-STRUCTURE, 69-1854-01 48-2285 -01 M8 x ...

  • Cisco Systems 3200 - page 240

    A-18 Cisco Tele Presence Syste m 3200 OL-14521-01 Appendix A Appendix A: Part s List Sorted by Carton Carton 51 of 58: Display Shelf Support s and Codec Tray , 69-1626-xx, CTS3K-STRUCTU RE Carton 51 of 58: Display Sh elf Supports an d Codec Tray, 69-1626-xx, CTS3K-STRUCTURE Carton 52 of 58: Tabletop Leg Base, 69-1620-xx, CTS3K-STRU CTURE Carton 53 ...

  • Cisco Systems 3200 - page 241

    A-19 Cisco TelePr esence Syste m 3200 OL-14521-01 Append ix A Appendi x A: Parts List Sorted by Cart on Carton 54 of 58: Ta bletop Leg Base , 69-1915-xx, C TS3K-STRUCTURE Carton 54 of 58: Tabletop Leg Base, 69-1915-xx, CTS3K-STRU CTURE Carton 55 of 58: Lighting Assembly, 69-1613-xx, CTS3K- LIGHT- STR Carton 56 of 58: Projector Bracket, 69-1631-xx, ...

  • Cisco Systems 3200 - page 242

    A-20 Cisco Tele Presence Syste m 3200 OL-14521-01 Appendix A Appendix A: Part s List Sorted by Carton Carton 58 of 58: Tableto p Sections, Display Shel ves, an d Speaker Boards, 69-1835-x x, CTS3K -M Carton 58 of 58: Tableto p Section s, Display Shelves, and Speaker Board s, 69-1835-xx, CTS3K-M Note Ea ch p art nu mber has a s eparat e ca rton , ho ...

  • Cisco Systems 3200 - page 243

    B-1 Cisco TelePr esence Syste m 3200 OL-14521-01 APPENDIX B Appendix B: Region- and Country-Specific Equip ment Revised: July 28 , 2008, OL-14521-0 1 The fol lo wing countrie s and re gions ha ve equipment manufactu red to l ocal re gulations: Asia Pacific Argentina Part Description Part Number Qty Notes T e lePresence Po wer Cord PWR-CORD10-AP 37- ...

  • Cisco Systems 3200 - page 244

    B-2 Cisco Tele Presence Syste m 3200 OL-14521-01 Appendix B Appendi x B: Region- and Country-Sp ecific Equipment Aust ralia Australia Central Europe China Euro pe Part De scrip tion Part N umber Qty Notes T elePresence Power Cor d PWR-CORD10-A U 37-0 840-01 6 I/O modul es: power/Ethernet CTS-LA PCONN-A U 74-4 866-01 18 Part Description Part Number ...

  • Cisco Systems 3200 - page 245

    B-3 Cisco TelePr esence Syste m 3200 OL-14521-01 Append ix B Appendix B: Region - and Count ry-Specif ic Equipm ent India, UAE, Sou th Africa India, UAE, South Afri ca Israel Italy Japan Part De scrip tion Part N umber Qty Notes T elePresence Power Cor d PWR-CORD10-I D 37-0 838-01 6 I/O m odules : po wer/Eth ernet CTS- LAPCONN -ID 74-4 864-01 18 Pa ...

  • Cisco Systems 3200 - page 246

    B-4 Cisco Tele Presence Syste m 3200 OL-14521-01 Appendix B Appendi x B: Region- and Country-Sp ecific Equipment North Ameri ca North America Switze rland United Ki ngdom Part Description Part Number Qty Notes T e lePresence Po wer Cord PWR-CORD10-N A 37-0847- 01 6 I/O module s: power/Ethernet CTS-LA PCONN-NA 74-4868- 01 18 Part Description Part Nu ...

Manufacturer Cisco Systems Category Switch

Documents that we receive from a manufacturer of a Cisco Systems 3200 can be divided into several groups. They are, among others:
- Cisco Systems technical drawings
- 3200 manuals
- Cisco Systems product data sheets
- information booklets
- or energy labels Cisco Systems 3200
All of them are important, but the most important information from the point of view of use of the device are in the user manual Cisco Systems 3200.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Cisco Systems 3200, service manual, brief instructions and user manuals Cisco Systems 3200. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Cisco Systems 3200.

Similar manuals

A complete manual for the device Cisco Systems 3200, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Cisco Systems 3200 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Cisco Systems 3200.

A complete Cisco Systems manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Cisco Systems 3200 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Cisco Systems 3200, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Cisco Systems 3200, that we can find in the current document
3. Tips how to use the basic functions of the device Cisco Systems 3200 - which should help us in our first steps of using Cisco Systems 3200
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Cisco Systems 3200
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Cisco Systems 3200 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Cisco Systems 3200?

Use the form below

If you did not solve your problem by using a manual Cisco Systems 3200, ask a question using the form below. If a user had a similar problem with Cisco Systems 3200 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)