Manual ADTRAN NetVanta 1224R

13 pages 4.79 mb
Download

Go to site of 13

Summary
  • ADTRAN NetVanta 1224R - page 1

    TECHNICAL SUPPORT NOTE Using the GUI to Configure a N etVanta 1224R/STR fo r Internet Access using an Ethernet Port (Cable or DSL modem) Featuring ADTRAN OS and the Web GUI _____________________________________________________________________________________ Introduction This Technical Support Note shows how to conf igure the NetVanta 1224R/STR for ...

  • ADTRAN NetVanta 1224R - page 2

    Step 2 – Setting up the Private VLAN Interface Click the “VLANs” link to setup the IP addresses for the unit. In the following diagrams, we will change the default IP address to 192.168.1.254. Note: When you submit the default IP address change, you will need to change your workstation IP address to match up with the new subnet and reconnect ...

  • ADTRAN NetVanta 1224R - page 3

    Change the IP address to 192.168.1.254. After changing the default VLAN interface IP address, be sure to change your workstation IP address to match this network. For example, you could use 192.168.1.1 as your workstation IP address with a default gateway of 192.168.1.254. ...

  • ADTRAN NetVanta 1224R - page 4

    Step 3 – Add a New VLAN for the Public Subnet (Port) The public VLAN will be configured in one of three different m odes, (A) IP Routing with a Static IP, (B) IP Routing using DHCP, or (C) PPPoE. DHCP is normally used when connected to a cable modem and PPPoE is often used when connected to a DSL m odem set in pass-through or bridge mode. The fol ...

  • ADTRAN NetVanta 1224R - page 5

    (Option A) – IP Routing with a Static IP Configuration. The IP address 100.100.100.2 is used as an example. The IP address information should have been provided to you by your Internet Service Provider (ISP). ...

  • ADTRAN NetVanta 1224R - page 6

    (Option B) – IP Routing Using DHCP. This is a typical cable modem setup. ...

  • ADTRAN NetVanta 1224R - page 7

    (Option C) – PPPoE (ADSL modem set to pass-through m ode) Set the Interface Mode to PPPoE and click “Apply”. Clicking “Apply” will open a new page to set PPPoE specific settings. ...

  • ADTRAN NetVanta 1224R - page 8

    (Option C) – PPPoE specific settings A username and password are required for PPPoE. Service Name and AC Nam e are rarely used but should be entered if provided by the ISP. P eer Authentication type should almost always be set to “None”. Also, PPPoE should be set for “Negotiated” IP address unless the ISP has specified a static IP address ...

  • ADTRAN NetVanta 1224R - page 9

    Step 4 – Adding a Default Route when using a Static IP Address This step is not required when learning a default route dynamically as in step 3 (option B) when we used DHCP. You need to add a static default route when using IP Routing with a static IP address or PPPoE with a static IP address. Click the “Route Table” link and then add a stati ...

  • ADTRAN NetVanta 1224R - page 10

    Step 5 – Assign an Ethernet Port to be a member of the Public VLAN In the example below, we are setting the first Ethernet port as a mem ber of VLAN 100 and setting it to “edgeport” mode to allow this port to come up im mediately. This port should be plugged into your Internet connection. Make sure your workstation is not plugged into this po ...

  • ADTRAN NetVanta 1224R - page 11

    Step 6-1. The first wizard page is just a warning that this will overwrite any previous firewall settings. Step 6-2. Select the public VLAN interface. In our example, this is VLAN 100. ...

  • ADTRAN NetVanta 1224R - page 12

    Step 6-3. This step will allow you to setup some basic port forwarding. Port forwarding can be done at a later date by adding policies to the “Public” Security Zone. Step 6-4. The final step is to confirm that the default VLAN 1 will share the IP address applied to the public VLAN 100. ...

  • ADTRAN NetVanta 1224R - page 13

    Step 7 – Save Your Changes The basic configuration should be complete after using the Firewall Wizard. Be sure to click “Save” after you make any configuration changes. This will ensure that the configuration will be maintained in the unit by storing it in the NVRAM. Step 8 – Consult Additional Documentation Additional Documentation is avai ...

Manufacturer ADTRAN Category Switch

Documents that we receive from a manufacturer of a ADTRAN NetVanta 1224R can be divided into several groups. They are, among others:
- ADTRAN technical drawings
- NetVanta 1224R manuals
- ADTRAN product data sheets
- information booklets
- or energy labels ADTRAN NetVanta 1224R
All of them are important, but the most important information from the point of view of use of the device are in the user manual ADTRAN NetVanta 1224R.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals ADTRAN NetVanta 1224R, service manual, brief instructions and user manuals ADTRAN NetVanta 1224R. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product ADTRAN NetVanta 1224R.

A complete manual for the device ADTRAN NetVanta 1224R, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use ADTRAN NetVanta 1224R by users. Manuals are usually written by a technical writer, but in a language understandable to all users of ADTRAN NetVanta 1224R.

A complete ADTRAN manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual ADTRAN NetVanta 1224R - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the ADTRAN NetVanta 1224R, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the ADTRAN NetVanta 1224R, that we can find in the current document
3. Tips how to use the basic functions of the device ADTRAN NetVanta 1224R - which should help us in our first steps of using ADTRAN NetVanta 1224R
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with ADTRAN NetVanta 1224R
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of ADTRAN NetVanta 1224R in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning ADTRAN NetVanta 1224R?

Use the form below

If you did not solve your problem by using a manual ADTRAN NetVanta 1224R, ask a question using the form below. If a user had a similar problem with ADTRAN NetVanta 1224R it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)