Manual Foster FCI20

23 pages 0.99 mb
Download

Go to site of 23

Summary
  • Foster FCI20 - page 1

    Service Manual Service Manual F20, F40, F60, F85 & FCI20, FCI30, FCI40 FCI60, FCI85 Cube Ice Mak er Foster Refrigerator Oldmedow Road, King’s L ynn, Norfolk PE30 4JU England T el: 01553 691 122 Fax: 01553 691447 Website: www .fosterrefrigerator .co.uk E-mail: sales@foster-uk.com a Division of ITW (UK) Ltd. F/FCI/SM/02/03 ...

  • Foster FCI20 - page 2

    CONTENTS Page 1. General Information and Installation Instructions 2 1.1 Introduction 2 1.2 Unpacking and Inspection 2 1.3 Location and Leveling 2 1.4 W ater Supply and Drain Connections 2-3 1.5 Final Checklist 3 1.6 Installation Practice 3 2. F20 and F40 T echnical Data and Operating Instructions 4 3. F60 and F85 T echnical Data and Operating Inst ...

  • Foster FCI20 - page 3

    1. General Information and Installation Instructions 1.1 Introduction The Electronic Cubers are quality designed, engineered and manufactured. Their ice making systems are thoroughly tested providing the utmost in flexibility to fit the needs of a particular user . These icemakers have been engineered to our own rigid safety and performance stand ...

  • Foster FCI20 - page 4

    fittings and a shut off valve installed in an accessible position between the water supply line and the unit. W A TER SUPPL Y - W A TER COOLED MODELS. The water cooled versions require two separate inlet water supplies on models 40 and 60, one to supply water for the ice production and one for the water cooled condenser . Connect the male fitting ...

  • Foster FCI20 - page 5

    2. F20 and F40 T echnical Data and Operating Instructions 2.1 T echnical Data Model F20 F40 Output – kg/24hr 19.5 34.5 Bin storage capacity – kg 6.5 15 Cubes per cycle 16 24 Cubes kg per cycle 0.28 0.42 Cycle time – minutes 20.7 17.5 Amps start/run 1 1Amps/2Amps 17Amps/3.3Amps W atts consumption (30°C Ambient T emp) 320w 450w W ater consumpt ...

  • Foster FCI20 - page 6

    3. F60 and F85 T echnical Data and Operating Instructions 3.1 T echnical Data Model F60 F85 Output – kg/24hr 60 83 Bin storage capacity – kg 27 27 Cubes per cycle 48 48 Cubes kg per cycle 0.84 0.84 Cycle time – minutes 19.0 15.5 Amps start/run 19/4.1 26/5.5 W atts consumption (30°C Ambient T emp) 630 780 W ater consumption (Water T emp at 15 ...

  • Foster FCI20 - page 7

    I. The machine may stop working if the condenser temperature exceeds the pre-set temperature of the Over T emperature Thermostat (non- adjustable) due to a very high ambient temperature, condenser fan failure, dirty/ blocked condenser. T o restart the machine, depress the protruding button on the Alarm Reset. J. Changes to the defrost time. Under n ...

  • Foster FCI20 - page 8

    F20 & F40 A/W Wiring Diagram 7 the service and inspection operations. IN OPERA TION: The unit is running through the freezing and defrost cycle stopping automatically only at full bin situation. RE-SET/HI TEMPERA TURE: T o be selected to resume the unit operation when the ice maker shuts off due to the intervention of the condenser temperature ...

  • Foster FCI20 - page 9

    4. T echnical Specification - R22 Machines MODEL FCI 20 FCI 30 FCI 40 FCI 60 FCI 85 Output – kg/24hr . 18 (20.5) 26 (34) 34 (42) 57 (70) 78 (90) Bin storage capacity – kg 6.5 15 15 27 27 Cubes per cycle 16 24 24 48 48 kg per cycle 0.28 (0.38) 0.42 (0.6) 0.42 (0.6) 0.82 (1.2) 0.82 (1.2) Cycle time – minutes 22 (25) 23.5 (24.5) 15.75 (19.15) 2 ...

  • Foster FCI20 - page 10

    COMPRESSOR, W A TER INLET SOLENOID V AL VE, HOT GAS V AL VE NOTE: The length of the defrost cycle is (non-adjustable) automatically determined by the microprocessor of The P .C. BOARD in relation to the time T2 necessary for the unit to reduce the evaporator temperature from 0˚C (35˚F) to -1 3˚C (8.5˚F) and of the ambient temperature, as illust ...

  • Foster FCI20 - page 11

    7. The DIP . SWITCH keys setting is made in consideration of the model and of the type of condenser used (air or water cooled). In T able B, page 12, are indicated the various lengths of the third portion of freezing cycle (T ime mode) in accordance with the different combinations of the DIP . SWITCH KEYS. In T able A, page 12, are indicated the DI ...

  • Foster FCI20 - page 12

    B. ICE BIN LEVEL SENSOR The ice bin level temperature sensor , secured to one of the storage bin walls, stops the operation of the entire ice maker at the end of the defrost cycle when its sensing probe (in contact with the stored ice) reaches the temperature of +2˚C (35˚F) lighting up, in the meantime, the third RED LED. Once the ice is removed ...

  • Foster FCI20 - page 13

    7. Dip Switch Positions DIP SWITCHES FCI 20 FCI 30 FCI 40 FCI 60 FCI 85 1 ON ON ON ON ON 2 OFF OFF OFF OFF OFF 3 ON OFF ON ON ON 4 OFF OFF OFF ON ON 5 ON ON ON ON ON 6 OFF OFF OFF OFF OFF 7 ON ON ON ON ON 8 OFF OFF OFF OFF OFF 9 OFF OFF OFF OFF OFF 10 OFF OFF OFF OFF ON T able C LENGTH OF THE DEFROST CYCLE T s ACCORDING TO THE TIME OF T2 T2 T s T2 ...

  • Foster FCI20 - page 14

    7. Dip Switch Positions DIP SWITCHES FCI 20 FCI 30 FCI 40 FCI 60 FCI 85 1 ON ON ON ON ON 2 OFF OFF OFF OFF OFF 3 ON OFF ON ON ON 4 OFF OFF OFF ON ON 5 ON ON ON ON ON 6 OFF OFF OFF OFF OFF 7 ON ON ON ON ON 8 OFF OFF OFF OFF OFF 9 OFF OFF OFF OFF OFF 10 OFF OFF OFF OFF ON T able C LENGTH OF THE DEFROST CYCLE T s ACCORDING TO THE TIME OF T2 T2 T s T2 ...

  • Foster FCI20 - page 15

    B. ICE BIN LEVEL SENSOR The ice bin level temperature sensor , secured to one of the storage bin walls, stops the operation of the entire ice maker at the end of the defrost cycle when its sensing probe (in contact with the stored ice) reaches the temperature of +2˚C (35˚F) lighting up, in the meantime, the third RED LED. Once the ice is removed ...

  • Foster FCI20 - page 16

    7. The DIP . SWITCH keys setting is made in consideration of the model and of the type of condenser used (air or water cooled). In T able B, page 12, are indicated the various lengths of the third portion of freezing cycle (T ime mode) in accordance with the different combinations of the DIP . SWITCH KEYS. In T able A, page 12, are indicated the DI ...

  • Foster FCI20 - page 17

    COMPRESSOR, W A TER INLET SOLENOID V AL VE, HOT GAS V AL VE NOTE: The length of the defrost cycle is (non-adjustable) automatically determined by the microprocessor of The P .C. BOARD in relation to the time T2 necessary for the unit to reduce the evaporator temperature from 0˚C (35˚F) to -1 3˚C (8.5˚F) and of the ambient temperature, as illust ...

  • Foster FCI20 - page 18

    4. T echnical Specification - R22 Machines MODEL FCI 20 FCI 30 FCI 40 FCI 60 FCI 85 Output – kg/24hr . 18 (20.5) 26 (34) 34 (42) 57 (70) 78 (90) Bin storage capacity – kg 6.5 15 15 27 27 Cubes per cycle 16 24 24 48 48 kg per cycle 0.28 (0.38) 0.42 (0.6) 0.42 (0.6) 0.82 (1.2) 0.82 (1.2) Cycle time – minutes 22 (25) 23.5 (24.5) 15.75 (19.15) 2 ...

  • Foster FCI20 - page 19

    F20 & F40 A/W Wiring Diagram 7 the service and inspection operations. IN OPERA TION: The unit is running through the freezing and defrost cycle stopping automatically only at full bin situation. RE-SET/HI TEMPERA TURE: T o be selected to resume the unit operation when the ice maker shuts off due to the intervention of the condenser temperature ...

  • Foster FCI20 - page 20

    I. The machine may stop working if the condenser temperature exceeds the pre-set temperature of the Over T emperature Thermostat (non- adjustable) due to a very high ambient temperature, condenser fan failure, dirty/ blocked condenser. T o restart the machine, depress the protruding button on the Alarm Reset. J. Changes to the defrost time. Under n ...

  • Foster FCI20 - page 21

    3. F60 and F85 T echnical Data and Operating Instructions 3.1 T echnical Data Model F60 F85 Output – kg/24hr 60 83 Bin storage capacity – kg 27 27 Cubes per cycle 48 48 Cubes kg per cycle 0.84 0.84 Cycle time – minutes 19.0 15.5 Amps start/run 19/4.1 26/5.5 W atts consumption (30°C Ambient T emp) 630 780 W ater consumption (Water T emp at 15 ...

  • Foster FCI20 - page 22

    2. F20 and F40 T echnical Data and Operating Instructions 2.1 T echnical Data Model F20 F40 Output – kg/24hr 19.5 34.5 Bin storage capacity – kg 6.5 15 Cubes per cycle 16 24 Cubes kg per cycle 0.28 0.42 Cycle time – minutes 20.7 17.5 Amps start/run 1 1Amps/2Amps 17Amps/3.3Amps W atts consumption (30°C Ambient T emp) 320w 450w W ater consumpt ...

  • Foster FCI20 - page 23

    fittings and a shut off valve installed in an accessible position between the water supply line and the unit. W A TER SUPPL Y - W A TER COOLED MODELS. The water cooled versions require two separate inlet water supplies on models 40 and 60, one to supply water for the ice production and one for the water cooled condenser . Connect the male fitting ...

Manufacturer Foster Category Microphone

Documents that we receive from a manufacturer of a Foster FCI20 can be divided into several groups. They are, among others:
- Foster technical drawings
- FCI20 manuals
- Foster product data sheets
- information booklets
- or energy labels Foster FCI20
All of them are important, but the most important information from the point of view of use of the device are in the user manual Foster FCI20.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Foster FCI20, service manual, brief instructions and user manuals Foster FCI20. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Foster FCI20.

Similar manuals

A complete manual for the device Foster FCI20, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Foster FCI20 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Foster FCI20.

A complete Foster manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Foster FCI20 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Foster FCI20, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Foster FCI20, that we can find in the current document
3. Tips how to use the basic functions of the device Foster FCI20 - which should help us in our first steps of using Foster FCI20
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Foster FCI20
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Foster FCI20 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Foster FCI20?

Use the form below

If you did not solve your problem by using a manual Foster FCI20, ask a question using the form below. If a user had a similar problem with Foster FCI20 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)