Manual Linksys WPS11

30 pages 0.84 mb
Download

Go to site of 30

Summary
  • Linksys WPS11 - page 1

    Instant Wireless ™ Series Wireless PrintSer ver Use this Guide to install: Model No.: WPS11 User Guide ...

  • Linksys WPS11 - page 2

    COPYRIGHT & TRADEMARKS Copyright © 2001 Linksys, All Rights Reserved. Microsoft, Windows, and the Windows logo are r egister ed trademarks of Micr osoft Corporation. All other trademarks and brand names are the pr operty of their respective proprietors. LIMITED W ARRANTY Linksys guarantees that every Instant Wireless ® Wireless PrintServer is ...

  • Linksys WPS11 - page 3

    T able of Contents Introduction 1 The Instant Wireless ™ Wireless PrintServer 1 Features 1 Package Contents 2 Getting to Know the Wireless PrintSer ver 3 The Wireless PrintSer ver’s LEDs 3 The Wireless PrintSer ver’s Ports 4 Hardwar e Installation 5 Overview 5 Finding the Wireless PrintSer ver’s Default Name 5 Finding the Wireless PrintSer ...

  • Linksys WPS11 - page 4

    • One Instant W ireless™ Wireless PrintSer ver • One Antenna (Not Sho wn) • One Setup Utility CD • One P ow er Adapter • One User Guide on Setup Utility CD (Not Sho wn) • One Registration Card (Not Sho wn) 2 Instant Wireless™ Series Wireless PrintSer ver Introduction Congratulations on your purchase of the Instant W ireless™ W ire ...

  • Linksys WPS11 - page 5

    4 LAN This port connects to your wired netw ork using a standard Category 5 netw ork cable. Printer This Parallel (LPT) P ort connects to your printer . Reset Button Briefly pressing the Reset Button will refresh the W ireless PrintSer v er’ s connections, potentially clear- ing any jammed links. Power This port connects the pow er adapter . Ante ...

  • Linksys WPS11 - page 6

    6 Connecting the Wireless PrintServer to Y our Network 1. After po wering on the Wireless PrintServer , plug one end of a UTP Category 5 (or better) cable into the W ireless PrintServer’ s LAN P or t. 2. Connect the other end of the cable into a netw orked hub or s witch. The dis- tance betw een the W ireless PrintSer ver and the second de vice s ...

  • Linksys WPS11 - page 7

    1. T o begin dri ver installation, click the Start button, select Run , and type D:Driv erWin9xntAddP ort_Linksys.ex e (where D is the letter of y our CD-R OM driv e) in the Open f ield that appears. Click the OK button. 2. The Install Wizar d window appears. Read the te xt that appears and click the Next button. The Autorun Bi-Admin Management ...

  • Linksys WPS11 - page 8

    10 5. Dri ver installation is no w completed but the Print Driv er still needs to be conf igured. The W ireless-Ready PrintSer ver will not function properly until the Print Driv er is conf igured. Check the box beside Conf igure Print Driv er No w and click the Finish button to continue. 6. Before setting up and conf iguring the Print P or t, foll ...

  • Linksys WPS11 - page 9

    12 11 9. The Ad d New Printer Wizar d will come up at this point. F ollo w the stan- dard procedure for adding printers under W indows. If y ou hav e an y ques- tions on adding printers, please refer to your W indo ws documentation. 10. After your printer(s) ha ve been added , you will return to the Conf igure Printer P or t screen. Click the Conne ...

  • Linksys WPS11 - page 10

    14 13 Bi-Admin: PrintSer ver Management Overview The W ireless PrintSer ver is managed b y a utility program called Bi-Admin on the W ireless PrintSer ver’ s Setup CD . Fully compatib le with W indows 95, 98, Millennium, NT , 2000, and XP , Bi-Admin allows y ou to change the W ireless PrintServer’ s internal settings, check on the unit’ s sta ...

  • Linksys WPS11 - page 11

    16 15 Obtaining Device Information: The Device Information Icon T o access infor mation about the W ireless PrintSer ver , either click on it in the De vice List windo w (on the right side of the Bi-Admin windo w) or highlight the W ireless PrintServer and click on the Device Inf ormation icon, sho wn abo ve. Y ou can also highlight the W ireless P ...

  • Linksys WPS11 - page 12

    18 17 The W ireless PrintSer ver comes with a default device name printed on the bot- tom of the unit, and al wa ys star ting with the pref ix SC (example: SC489392). The SC name is the name of the W ireless PrintServer an y time users on the net- w ork quer y it . T o make the Wireless PrintServer more user -friendl y , you can gi ve it a unique d ...

  • Linksys WPS11 - page 13

    Logical P ort Configuration: Logical P ort Configuration Icon T o set or change the W ireless PrintServer’ s logical port set- tings, highlight the W ireless PrintSer ver to be changed and click on the Logical P ort icon (sho wn here). The Logical P ort Conf iguration windo w will appear . Make any changes to the settings, and click on Sa ve to D ...

  • Linksys WPS11 - page 14

    When the Conf igure Ser v er scr een appears, enter the W ireless PrintServer name (in the example sho wn here SCA71107 ) . Then enter your pass w ord (if you created one) into the P assw ord dropdo wn bo x and type it again in the V erify Pass word to conf ir m it. Check all box es that apply to your netw ork next to the Enable area under Protocol ...

  • Linksys WPS11 - page 15

    Click the Wir eless tab to allo w you to vie w infor mation about the W ireless PrintServer . No values can be changed on this screen. This screen is for infor- mation onl y . Clicking the Refresh button causes the W ireless PrintServer to retriev e this infor mation again. The Wireless Page 24 Wireless PrintServer Click the TCP/IP tab to vie w or ...

  • Linksys WPS11 - page 16

    Advanced Properties The Adv anced Properties section of the W eb-based Utility is for users who ha ve a thorough understanding of netw orks and network settings. Changing these settings can cause inter ruption of network communication and mak e the W ireless PrintSer ver cease to function properl y . T o access the Adv anced Properties, click the A ...

  • Linksys WPS11 - page 17

    Click the Logical Printers ta b to vie w or change the logical printer settings of the W ireless PrintSer ver . F or each Logical Printer , the follo wing f ields are av ailable: Logical Printer(P ort) - Select the Logical Printer P or t you wish to conf igure. (L1 to L8). Click the Get Data button to update the displa y with the cur rent data for ...

  • Linksys WPS11 - page 18

    Click the SNMP tab to view or change the SNMP settings of the Wireless PrintServer . The W ireless PrintSer ver supports SNMP (Simple Network Management Protocol). This allo ws netw ork super visors to monitor and control the W ireless PrintSer ver using netw ork management platfor ms such as HP OpenV iew , IBM SystemV iew , etc. The appropriate MI ...

  • Linksys WPS11 - page 19

    Internet Printing Protocol (IPP) IPP (Internet Printing Protocol) is a new standards-based system to allo w remote printing from a PC to an y accessible printer . Nor mally , the printer will be attached to a computer or other de vice which functions as an IPP Server . F or client PCs, it is necessary to install a compatible IPP Client program. The ...

  • Linksys WPS11 - page 20

    5. Click Sa ve to create the IPP port on your system. Y ou will see a message con- f irming that the por t has been created , then the follo wing dialo g: 6. Either select an existing printer to use the ne w por t, and click OK . OR Click the Add Ne w Printer button to create a new printer to use the IPP port. This will start the Add Printer wizard ...

  • Linksys WPS11 - page 21

    2. Select Netw ork Printer and click Next to see the Locate your Printer screen, as sho wn below . 3. Select Connect to a printer on the Internet or on your intranet, and enter the URL of the IPP Server as follo ws, where ip_address represents the IP Address of the IPP Server , and 631 is the por t number . Parallel P ort 1 ip_address:631/ipp/P1 Th ...

  • Linksys WPS11 - page 22

    38 DHCP Support for the Wireless PrintSer ver T o use DHCP , which assigns non-static IP addresses, y ou must ha ve a DHCP server and DHCP management software. Otherwise, the W ireless PrintServer's IP address will remain unkno wn, and connecting to it will impossible. In this case, ignore DHCP and conf igure the Wireless PrintServer for a sta ...

  • Linksys WPS11 - page 23

    Appendix Normal printing only sends print signals from a PC to a printer . Bi-dir ection- al printing , also called bitronic printing, refers to a printer's ability to do just the opposite- talk back to a PC to notify it of a print job status, paper jams, etc. This tw o-wa y communication technology can be found in HP , IBM, Panasonic, and oth ...

  • Linksys WPS11 - page 24

    printer status, do not use it with the W ireless PrintSer ver - the softw are is most likel y not network-capab le. F or best results, turn off the printer’ s bi-directional function either b y ( 1 ) remo ving any bi-directional printing softw are from your netw ork computers, and/or ( 2 ) tur ning off the printer’ s bi-directional print fea- t ...

  • Linksys WPS11 - page 25

    Ethernet - IEEE standard netw ork protocol that specif ies ho w data is placed on and retriev ed from a common transmission medium. Has a transfer rate of 10 Mbps. F or ms the underlying transport vehicle used b y several upper -level protocols, including TCP/IP and XNS. Fir e wall - A f irew all is a set of related programs, located at a netw ork ...

  • Linksys WPS11 - page 26

    NetBIOS - The native netw orking protocol in DOS and W indows netw orks. Although originall y combined with its transport lay er protocol (NetBEUI), NetBIOS toda y provides a pro g ramming interface for applications at the ses- sion la yer (la yer 5). NetBIOS can ride o ver NetBEUI, its nativ e transport, which is not routab le, or o ver TCP/IP and ...

  • Linksys WPS11 - page 27

    TCP/IP - T ransmission Control Protocol/Internet Protocol (TCP/IP) is the basic communication language or protocol of the Internet. It can also be used as a communications protocol in a priv ate netw ork (either an intranet or an extranet). When you are set up with direct access to the Internet, your comput- er is pro vided with a copy of the TCP/I ...

  • Linksys WPS11 - page 28

    Environmental Dimensions: 5.91” x 8.66” x 1.18” (150mm x 220mm x 30mm) Unit Weight: 5.6 oz. (0.16 kg) P ower: Exter nal, 12V DC , 800mA Certifications: FCC Class B , CE Mark Commercial Operating T emp: 0ºC to 40ºC (32ºF to 104ºF) Storage T emp: -20ºC to 70ºC (-4ºF to 158ºF) Operating Humidity: 10% to 85%, Non-Condensing Storage Humidi ...

  • Linksys WPS11 - page 29

    52 51 Contact Information F or help with the installation or operation of this product, contact Linksys Customer Support at one of the phone numbers or Inter net addresses below . Sales Information 800-546-5797 (LINKSYS) T ech Support 866-242-8558 RMA Issues 949-261-1288 Fa x 949-261-8868 Email support@linksys.com We b http://www .linksys.com FTP S ...

  • Linksys WPS11 - page 30

    © Copyright 2001 Linksys, All Rights Reserved. http://www .linksys.com ...

Manufacturer Linksys Category Printer

Documents that we receive from a manufacturer of a Linksys WPS11 can be divided into several groups. They are, among others:
- Linksys technical drawings
- WPS11 manuals
- Linksys product data sheets
- information booklets
- or energy labels Linksys WPS11
All of them are important, but the most important information from the point of view of use of the device are in the user manual Linksys WPS11.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Linksys WPS11, service manual, brief instructions and user manuals Linksys WPS11. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Linksys WPS11.

Similar manuals

A complete manual for the device Linksys WPS11, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Linksys WPS11 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Linksys WPS11.

A complete Linksys manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Linksys WPS11 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Linksys WPS11, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Linksys WPS11, that we can find in the current document
3. Tips how to use the basic functions of the device Linksys WPS11 - which should help us in our first steps of using Linksys WPS11
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Linksys WPS11
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Linksys WPS11 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Linksys WPS11?

Use the form below

If you did not solve your problem by using a manual Linksys WPS11, ask a question using the form below. If a user had a similar problem with Linksys WPS11 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)