Manual DCS -IVH-48

20 pages 0.64 mb
Download

Go to site of 20

Summary
  • DCS -IVH-48 - page 1

    Dynamic Cook ing Sys tems, Inc. ISLAND VENT HOOD USE AND CARE INST ALLA TION INSTRUCTIONS DCS-IVH-48 DCS-IVH-36 ...

  • DCS -IVH-48 - page 2

    A MESSAGE TO OUR CUSTOMERS Thank you for selecting this Dynamic Cooking Systems Professional Island Vent Hood. Because of this appliance ’ s unique features we have developed this Installation and Use Guide. It contains valuable information on how to properly operate and maintain your new appliance for years of safe and enjoyable use. To help ser ...

  • DCS -IVH-48 - page 3

    Introduction 1 Before proceeding with installation, please read this installation guide and observe all safety precautions and warnings. NOTE: Installation of this DCS Island Vent Hood must comply with all local codes. IMPORTANT- Save these instructions for the Local Electrical Inspector ’ s use. INSTALLER- Please leave these instructions with th ...

  • DCS -IVH-48 - page 4

    Follow These Precautions Important Safety Instructions 2 CAUTION - TO REDUCE THE RISK OF ELECTRICAL SHOCK OR INJURY TO PERSONS ALL VENT HOODS MUST BE INSTALLED WITH VENTILATORS THAT HAVE BEEN APPROVED FOR USE WITH THE HOOD. Make up air may be necessary to prevent air flowing down chimney, unsealed door, window, or fire place opening. WARNING - TO R ...

  • DCS -IVH-48 - page 5

    Island Vent Hoods DCS-IVH-48 & DCS-IVH-36 Features 3 The Dynamic Cooking Systems Island Vent Hood Models; DCS IVH 48 , DCS IVH 36, have been designed with the ultimate in household conve- nience in mind. Features include a high capacity, variable speed blower with speed controller, commercial style dishwasher-safe filters, easy to clean inside ...

  • DCS -IVH-48 - page 6

    We recommend that a backdraft damper be used in all Vent Hood installations. Cold weather installations necessitate the use of a backdraft damper to minimize the flow of cold air into the room. A non-metallic thermal break should also be installed to mini- mize conduction of outside temperatures through the ductwork. Locate the thermal break as clo ...

  • DCS -IVH-48 - page 7

    Product and Venting Specifications Specifications 5 843fi21 16" 52 5/8" 30" 16" FR ONT VIEW SIDE VIEW 34 5/8" 12" 12" 34 5/8" DCS-IVH-48 DCS-IVH-48 DCS-IVH-36 DCS-IVH-36 VENT HOOD DIMENSIONS nt ro l 30" 12" T OP VIEW o f DCS-IVH 18" 12" T OP VIEW o f DCS-IVH v enting specs 7" Ø v ent ...

  • DCS -IVH-48 - page 8

    Site Preparation Site Preparation and Installation Guidelines 6 You will need to create a secure soffit structure to mount the Island Vent Hood to the ceiling. We suggest using 1 1/2 “ by 3 1/2 “ wood cut to fit the installation as shown in the following pages. The soffit mounting to the top of the Island Vent Hood will be 10 7/8 “ in length ...

  • DCS -IVH-48 - page 9

    Create your Soffit Struct first and attach Soffit B to each side with screws pr 36" ISLAND VENT HOOD SOFFIT MOUN 6 Mounting Scr ew s SOFFIT BRACKETS SCREWED TO BOTH SIDES OF SOFFIT STRUCTURE SCREW SUPPORT BARS ON BOTH SIDES AS SHOWN CREATE YOUR SOFFIT STRUCTURE ACCORDING TO THE CEILING HEIGHT THEN ATTACH IT TO THE CEILING JOIST. 843 fig 1 s ke ...

  • DCS -IVH-48 - page 10

    DCS-IVH-48 Island Vent Hood Soffit Installation 8 A TT A CH SOFFIT BRA CKETS ON 4 CORNER S OF THE SOFFIT STR UCTURE 2 SUPPOR T BA RS SOFFIT ASSEMBLY FOR DCS-IVH-48 10 7 / 8 " HEIGHT WILL VARY ACCORDING TO CEILING HEIGHT 28 7 / 8 " 4 SOFFIT BRA CKETS The dimensions giv en are f or a 1 THE DIMENSIONS GIVEN ARE FOR A 1/2 INCH DRYWALL DUCT CO ...

  • DCS -IVH-48 - page 11

    Soffit for DCS-IVH-48 Island Vent Hood Soffit Installation 28 7/8 " 10 7/8 " T OP VIEW o f DCS-IVH 48 SIDE VIEW f or DCS-IVH 48 S OFFIT STR UCTU 1 1/2 " x 3 1/2 " So f fit 3 1/2 "c ent erline t o cen t erline measuremen t f rom scr e w t o scr ew W ood S tructure 1 1/2 " x 3 1/2 " So f (4) so ffit br ack e ts The ...

  • DCS -IVH-48 - page 12

    Diagrams for DCS-IVH-48 Island Vent Hood Soffit Installation 10 counter top level 843 fig 4 FR ONT VIEW o f DCS-IVH 48 30" Min. t o cooking surf a ce Support Bars Ceiling Floor Typical 96" Ceiling Sho wn Duct Co v er NO TE: Duct Co v er height will v ary acco r ding t o ceiling heigh t these mus t be cust om built. 6 Moun ting Scre ws Sol ...

  • DCS -IVH-48 - page 13

    Duct Accessories General Ducting Information DCS-IVH-48 Requirements DCS-IVH-36 Requirements When planning the path for ducting to the outside, keep in mind the following guide- lines: - Minimize use of elbows and transitions in ductwork as to maximize air flow to out- side of building. An efficient airflow path contributes to the overall efficienc ...

  • DCS -IVH-48 - page 14

    Controls Care And Use 12 Hood Lighting Blower We recommend you turn your hood on before you begin cooking to establish fresh airflow. After you have finished cooking, let the blower run for a few minutes to clear the air and help keep the kitchen fresh and clean. The Blower is operated with 2 controls. The switch adjacent to the speed control turns ...

  • DCS -IVH-48 - page 15

    Care And Use 13 When cool the appliance can be cleaned with hot soapy water, rinsed, dried and buffed to a shine with a soft, heavy pile cloth. Always try this first, as it is the mildest form of cleaning. 1. Some brands of cleaners are harsher than others. Read their instructions. Try on a small inconspicuous area first. 2. To avoid marring the su ...

  • DCS -IVH-48 - page 16

    Cleaning the Grease Tray Care And Use 14 Location of grease tray DCS-IVH-36 DCS-IVH-48 Remove filter(s) by gently pulling up and out. The grease trays can easily be reached once the filters are removed. Grease collection trays are easily accessible at the center beneath the filter. See illustration below for location. ...

  • DCS -IVH-48 - page 17

    DCS-IVH-48 & DCS-IVH-36 Island Vent Hood Wiring Diagram 15 ...

  • DCS -IVH-48 - page 18

    16 W arranty Information Length of Warranty One (1) Year Full parts and Labor Covers the entire product Five (5) Years Limited Switches and motor All repair labor and parts found to be defective due to materials or workmanship for one full year from date of purchase. Service must be provided by an Authorized Factory Service Agent during normal work ...

  • DCS -IVH-48 - page 19

    How To Obtain Service: Ser vice 17 For warranty service, contact your local DCS authorized service agency. Be prepared to provide the Model Number, Serial Number, and date of installa- tion, and a brief description of the problem. If you need assistance in locating the authorized service agency in your area please contact the DCS Consumer Service D ...

  • DCS -IVH-48 - page 20

    Litho in USA 8-99 Part No. 10843 rev.2 As product improvement is an ongoing process at DCS, we reserve the right to change specifications or design without notice. Dynamic Cook ing Sy s tems , Inc. 5800 Skylab Road, Huntington Beach, CA. 92647 Tel: (714) 372-7000 Fax: (714) 372-7001 Parts/Customer Service (888) 281-5698 ...

Manufacturer DCS Category Ventilation Hood

Documents that we receive from a manufacturer of a DCS -IVH-48 can be divided into several groups. They are, among others:
- DCS technical drawings
- -IVH-48 manuals
- DCS product data sheets
- information booklets
- or energy labels DCS -IVH-48
All of them are important, but the most important information from the point of view of use of the device are in the user manual DCS -IVH-48.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals DCS -IVH-48, service manual, brief instructions and user manuals DCS -IVH-48. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product DCS -IVH-48.

Similar manuals

A complete manual for the device DCS -IVH-48, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use DCS -IVH-48 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of DCS -IVH-48.

A complete DCS manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual DCS -IVH-48 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the DCS -IVH-48, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the DCS -IVH-48, that we can find in the current document
3. Tips how to use the basic functions of the device DCS -IVH-48 - which should help us in our first steps of using DCS -IVH-48
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with DCS -IVH-48
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of DCS -IVH-48 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning DCS -IVH-48?

Use the form below

If you did not solve your problem by using a manual DCS -IVH-48, ask a question using the form below. If a user had a similar problem with DCS -IVH-48 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)