Manual Zebra Technologies AM16629-1

12 pages 0.71 mb
Download

Go to site of 12

Summary
  • Zebra Technologies AM16629-1 - page 1

    AM16629-1 Rev . C pg. 1 of 12 INST ALLA TION INSTR UCTIONS READ THIS MANUAL CAREFULL Y! F AILURE TO INST ALL THIS EQUIPMENT PER THESE INSTRUCTIONS WILL VOID THE W ARRANTY. ...

  • Zebra Technologies AM16629-1 - page 2

    pg. 2 of 12 AM16629-1 Rev . C SPECIAL NOTICES The following notices emphasize certain information in the guide. Each serves a special purpose and is displayed in the format shown: Note: Note is used to emphasize any significant information. Caution: Indicates information that, if not followed, can result in damage to software, hardware, or data. Ca ...

  • Zebra Technologies AM16629-1 - page 3

    AM16629-1 Rev . C pg. 3 of 12 INTRODUCTION NOTE: Zebra technologies Corporation is not liable for personal injury or damage to any equipment caused by the improper installation of this equipment to any power sour ce. The MMQ4 Mobile Mount system is designed to integrate a Zebra™ QL 420 Printer and a Zebra RCLI-DC Mobile Charger into the electrica ...

  • Zebra Technologies AM16629-1 - page 4

    pg. 4 of 12 AM16629-1 Rev . C T ools Required • An electrical drill, drill bits 1/4”(6 mm)) • T aps-1/4-20 and #6-32 (M6 and M3). • Common hand tools. Reference • QL 420 User ’ s Guide • The RCLI-DC Mobile Charger Installation Guide Contents of the Package • The Mobile Mount Bracket Assembly • The Lift T ruck Mounting Bracket • ...

  • Zebra Technologies AM16629-1 - page 5

    AM16629-1 Rev . C pg. 5 of 12 Figure 1 Standard Mounting Configurations height width depth depth w/ bin 21.32” 1 1.63” 8.2” 1 1.07” 54.2 29.5 20.83 28.1 height width depth depth w/bin 14.30* 1 1.63 15.65 18.00 36.32* 29.5 39.75 45.72 * includes minimum clearance for access to controls (RF) rather than cables. Plan your installation with the ...

  • Zebra Technologies AM16629-1 - page 6

    pg. 6 of 12 AM16629-1 Rev . C It is important to leave a free zone around the printer to allow loading of paper and routine cleaning of the print head. Refer to Figure 2. In addition, the Mobile Mount allows for some rotation of the printer to allow the best positioning for the operator . Extra clearance should be provided for this movement if it i ...

  • Zebra Technologies AM16629-1 - page 7

    AM16629-1 Rev . C pg. 7 of 12 11.00" 8.63" 2.01" 2.75" 1.82" 0.31" 0.31" Dia. x4 0.31" Use a 1/4” (6 mm) drill bit to make mounting holes. Secure the mount with nuts, bolts, and lock washers. Refer to Figure 2 for details on mounting dimensions. The mounting bracket can also be used as a template for locati ...

  • Zebra Technologies AM16629-1 - page 8

    pg. 8 of 12 AM16629-1 Rev . C PRINTER INST ALLA TION Printer Preparation Prepare the printer for installation by doing the following: • If your printer has a carrying strap, you must remove it by the following procedure (Refer to Figure 4) : 1. Unscrew the (2) #4-40 x 1” screws holding the top corners of the printer together . 2. Remove the Car ...

  • Zebra Technologies AM16629-1 - page 9

    AM16629-1 Rev . C pg. 9 of 12 Printer Installation The QL 420 Printer can now be installed in the Mobile Mount. Secure the printer to the Mobile Mount Bracket with (4) #8-32 x 3/8” Screws, Lock W ashers and Flat W ashers. (See Figure 5). Plug the output voltage cable from the Mobile Charger into the bottom of QL 420 Printer . (Note: In some insta ...

  • Zebra Technologies AM16629-1 - page 10

    pg. 10 of 12 AM16629-1 Rev . C Attaching the Fanfold Bin If the printer will be using fanfold media, you must install the fanfold bin to the Mobile Mount. Hook the lip on the back of the tray to the corresponding “hooks” on the mobile Mount. Install a 1/4- 20 Hex head screw to the back of the center bar on the Mobile Mount which supports the fa ...

  • Zebra Technologies AM16629-1 - page 11

    AM16629-1 Rev . C pg. 11 of 12 Connect the Printer • Plug the output cable from the Charger to the battery connection on the printer . (Re- fer to the QL 420 User ’ s Manual for more information.) If you are using a MMQ4 Mobile mount, it may be easier to plug in the charger connector before mounting the Printer to the Mobile Mount bracket. • ...

  • Zebra Technologies AM16629-1 - page 12

    AM16629-1 rev. C 8/12/2003 TECHNICAL SUPPORT U.S. ONL Y Zebra maintains a help line for questions involving installation of the MMQ4 Mobile Mount. Please have as much information as possible regarding your particular application ready when you call to enable the technical support personnel to help you. The number in the U.S. is (800)-556-7266. and ...

Manufacturer Zebra Technologies Category Car Video System

Documents that we receive from a manufacturer of a Zebra Technologies AM16629-1 can be divided into several groups. They are, among others:
- Zebra Technologies technical drawings
- AM16629-1 manuals
- Zebra Technologies product data sheets
- information booklets
- or energy labels Zebra Technologies AM16629-1
All of them are important, but the most important information from the point of view of use of the device are in the user manual Zebra Technologies AM16629-1.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Zebra Technologies AM16629-1, service manual, brief instructions and user manuals Zebra Technologies AM16629-1. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Zebra Technologies AM16629-1.

A complete manual for the device Zebra Technologies AM16629-1, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Zebra Technologies AM16629-1 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Zebra Technologies AM16629-1.

A complete Zebra Technologies manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Zebra Technologies AM16629-1 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Zebra Technologies AM16629-1, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Zebra Technologies AM16629-1, that we can find in the current document
3. Tips how to use the basic functions of the device Zebra Technologies AM16629-1 - which should help us in our first steps of using Zebra Technologies AM16629-1
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Zebra Technologies AM16629-1
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Zebra Technologies AM16629-1 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Zebra Technologies AM16629-1?

Use the form below

If you did not solve your problem by using a manual Zebra Technologies AM16629-1, ask a question using the form below. If a user had a similar problem with Zebra Technologies AM16629-1 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)