English dropdown-ico

Manual EverFocus ECOR264-16X1/1T

147 pages Not applicable
Download

Go to site of 147

Summary
  • EverFocus ECOR264-16X1/1T - page 1

    U s e r M a n u a l E E C C O O R R 2 2 6 6 4 4 - - 4 4 X X 1 1 D D V V R R E E C C O O R R 2 2 6 6 4 4 - - 9 9 X X 1 1 D D V V R R E E C C O O R R 2 2 6 6 4 4 - - 1 1 6 6 X X 1 1 D D V V R R ...

  • EverFocus ECOR264-16X1/1T - page 2

    E V E R F O C U S E L E C T R O N I C S C O R P O R A T I O N E C O R 2 6 4 - 4 X 1 D V R E C O R 2 6 4 - 9 X 1 D V R E C O R 2 6 4 - 1 6 X 1 D V R I n s t r u c t i o n M a n u a l  2 01 0 E ve rFo cus El ect roni cs C or p www .e ve rfoc us. co m Al l rig ht s r ese rve d. No p art o f t he conte nt s o f t hi s man ual may b e r ep rod uce d ...

  • EverFocus ECOR264-16X1/1T - page 3

    ii ii ii ii Safety Precautions  Refer all work rel ated to the i nstallation of this pro duct to qualified service personnel or system installers.  Do not block the ventilation openings or slots on the cover.  Do not drop metallic parts t hrough slots. Th is could p ermanently damage the appliance. Turn t h e power off immedia tely and con ...

  • EverFocus ECOR264-16X1/1T - page 4

    iii iii iii iii Unplug the unit from the out let be fore clean ing. Do not use liq uid cleaners, abrasive or aerosol cleaners. Use a damp cloth for cleaning  Attachments Do not use at tachments not recommended by the product ma nufacturer as they may cause haza rds.  Water and Mois ture Do not use this unit near water-for e xample, near a bat ...

  • EverFocus ECOR264-16X1/1T - page 5

    iv iv iv iv This Product is Ro HS compliant . WEEE The inform ation in this manua l was current upon publication. T he manufactur er reserves the right to revise and imp rove his products . Therefor e, all specifications are subject to chan ge without prior notice. Manu facturer is not r esponsible for misprints or typo graphical errors. Please rea ...

  • EverFocus ECOR264-16X1/1T - page 6

    v v v v TABLE OF CONT ENTS 1 PRODUCT OVERVIEW .......................................................... ........................................... 1 1.1 FEATURES ............ ............................................................. .............................................. 1 1.2 PACKAGE CONTENTS .......................... .............. ...

  • EverFocus ECOR264-16X1/1T - page 7

    vi vi vi vi 3.6 PTZ ............. .............................................................. ....................................................... 24 3.6.1 General P TZ control (if PT Z cameras are installed) ....... .......... .......... .......... .......... .......... ........... .......... .... 24 3.6.2 Express Contro l of PTZ ... ....... ...

  • EverFocus ECOR264-16X1/1T - page 8

    vii vii vii vii 4.10 SYSTEM SETT I NG .. ............................................................. ...................................... 90 4.10.1 Date/Time ...... .......... ........... .......... .......... .......... .......... .......... .......... .......... ........... .......... .......... .......... .... 90 4.10.2 Dayligh t Saving .... ...

  • EverFocus ECOR264-16X1/1T - page 9

    1 1 P R O D U C T O V E R V I E W This new E verFocus digital video recorder is based o n H.264 compression technology, re sulting in increased reco rding capacity and improved network imag e transmission speed while retain ing high image quality. Compreh ensive features and extended even t recording settings enable the almost universal application ...

  • EverFocus ECOR264-16X1/1T - page 10

    2 - Remote config uration support from the built-in we b interface - 10/100M E thernet interface for remote network vie wing and control - On-screen PTZ co ntrol via mouse or front panel - Support fo r up to 1 Hot Swappable HDD or 2 fixed in ter nal HDD* - Built-in DVD b urner* - 2 USB 2.0 po rts (1 located on front panel, 1 located on back panel) ...

  • EverFocus ECOR264-16X1/1T - page 11

    3 1 . 3 S PE C IF I C A T I O N S ECOR264X1 Channels 16 9 4 Compression F ormat H.264 480 NTSC /400 PAL (CIF) 270 NTSC /225 PAL (CIF ) 120 NTSC /100 PAL (CIF) 240 NTSC /200 PAL (2CIF) 240 NTSC /200 PAL (2CIF) 120 NTSC /100 PAL (2CIF) Recording Rate/ Resolution (Max. total) (FPS rates per cam era can be set inde pendently up to th e max total rat e) ...

  • EverFocus ECOR264-16X1/1T - page 12

    4 RS-232 YES RS-485 Terminal co nnector Power Source 12VDC – Power Supply Included Dimensions (L x W x H) 353.0 x 354.8 x 70.60 mm / 13 .89" x 13.96" x 3.055 " Tempera ture 0°C~40°C / 32 °F~104°F (20 ~80% humidity) Certifications CE, FCC, UL Supported PTZ Protocols EverFocus, Pel co D, Pelco P, Sa msung, Tr ansparent ...

  • EverFocus ECOR264-16X1/1T - page 13

    5 1 . 4 F R O N T P A N E L Your primary interaction with your new DVR will be through the Front Pa nel buttons and their corresponding buttons on the included I R Remote Control. Take a moment to learn where the keys are as the remainde r of the manual will refer to them often . Figure 1- 1 Front Panel 1) Remote Control Rec eiver: Receiver for I R ...

  • EverFocus ECOR264-16X1/1T - page 14

    6 10) V iew: Press this ke y to switch between 4x, PiP (Picture In P icture),full screen, 9x, 10x, 13x and 16x. Note: PIP displa y is not available in playback mode. 11) S EQ: Press this ke y to enter the auto sequential switching mode. The sequence dwell time can be set in “Display Setting” tab of the Menu. For more detail about SEQ, please se ...

  • EverFocus ECOR264-16X1/1T - page 15

    7 1 . 5 R E A R P A N E L During initial setu p you will be connecting your DVR to multiple input and output devices. Th is is done through the rear panel. Figure 1- 2 Rear Panel ○ ○ ○ ○ 1 Video In: Connect came ra’s video output or other composite video source to the video input connection. ○ ○ ○ ○ 2 eSATA: Used for external SATA ...

  • EverFocus ECOR264-16X1/1T - page 16

    8 ○ ○ ○ ○ 8 RS485 socke t: For remote control via RS-485 keyboards and teleme try control for attached PTZ devices ○ ○ ○ ○ 9 Main: Main monito r for live and playback display and on -screen display. ○ ○ ○ ○ 10 Call: Call monito r output. Spot monitor for full scre en live display, sequence mode and alarm camera switchin g. ? ...

  • EverFocus ECOR264-16X1/1T - page 17

    9 1 . 6 V ID E O I N P U T S / O U T P UT S I N ST A LL A T I O N Cameras and CCTV monitors mu st u se copp er center cond uctor/copper braid 75 Ohm video cable (e.g. RG-59, RG-6, RG-11) with BNC connectors. To avoid impedance mismatch and undesired loss/reflections, 50 Ohm coax cable (e.g. RG-58), or 75 ohm foil shield anten na cable and other typ ...

  • EverFocus ECOR264-16X1/1T - page 18

    10 Alarm input with N.O. (Normal O pen) contact A larm input with N. C. (Normal Closed) contact in idle state in id le state All setting s are programmed in the ALARM menu (Se ction 0). 1. 8.2 Al arm O u tp u t R e l a y The relay outpu t provides either Normally Open or Normally Close d dry contacts. Output relay in idle state 1 . 9 R S - 48 5 k e ...

  • EverFocus ECOR264-16X1/1T - page 19

    11 RS-485 bus serial wiring with co nnector boxes and connection cable Direct RS-485 bus star wiring is not supported unle ss using an EverFocus Model EDA997A (see b elow). Improper RS-485 bus st ar wiring An EDA997A RS -485 signal distributor may be used to use a star wiring configuration. Star wiring with RS-485 signal distr ibutor A RS-485 dist ...

  • EverFocus ECOR264-16X1/1T - page 20

    12 ATTENTION: EDA997A signa l distributors are unidirectional! This means that the signal only flows from the input towa rds the outputs. Therefore, e.g. the intercon nection of several keyboards is not possib le with these types of signal distributor! 1. 9.2 RS - 4 85 s o ck et p in ass ign m e nt The RS485 pin assig nment is as follows: 1. 9.3 EK ...

  • EverFocus ECOR264-16X1/1T - page 21

    13 ATTENTION: Some Pelco-D / -P protocol d omes and rece ivers req uire a n add ress offset of -1, i.e. the address assigned to the d ome / receive r in the DVR camera menu must be 1 be low the address set in the dome / receive r itself! 1 . 1 0 U S B - Mo u s e i n s t a l l a t i o n Connect the US B mouse to one of the 2 USB po rts. (This can be ...

  • EverFocus ECOR264-16X1/1T - page 22

    14 1. 11. 2 N et wor k C o nn ect io n th ro u gh P at ch C a b l e The connection to an existing network re quires a normal patch cable (straight-throu gh). The illustration shows the conn ection to a network switch or route r. Figure 1- 4 Network Connection t hrough Patch Cable Pinout of straight patch cable 1 . 1 2 F I N A L IN S T A L L P R O C ...

  • EverFocus ECOR264-16X1/1T - page 23

    15 2 M O U S E A N D F R O N T P A N E L O P E R A T I O N ECOR264 DV Rs su pport mu ltiple sources to control the DVR. It can be controlled with a mouse, the front panel, an EKB5 00, and the handheld IR remote control. This chapter will cov er the basic operation using the mouse and the front panel button s. 2 . 1 G E N E R A L US B MO U S E OP E ...

  • EverFocus ECOR264-16X1/1T - page 24

    16 2. 1.3 O pe r at ion i n th e C o nf i g ur a t i on M e nu s Click on the icon to access the Configuration Menu. The Configu ration menu screens (shown in Figure 2-2 OSD Menu) are divided into 3 main sections . Figure 2- 2 OSD Menu 1. In section 1 , there are ten setup options available. Move t he mouse over an icon and c lick to select it. 2. ...

  • EverFocus ECOR264-16X1/1T - page 25

    17 Button : Click the bu tton to execute the function. Bar : Click and hold on the bar to adjust the set point Left or Right. * Note about on-scr een keyboard: Click on a button to input that character. The buttons on the right and bottom have the following funct ions: Space Enter a space Caps Switch to capital letters Delete the letter Confirm the ...

  • EverFocus ECOR264-16X1/1T - page 26

    18 2 . 2 G e n e ra l F ro n t P an e l O pe ra t i o n 2. 2.1 H ow t o sel ect a c h an nel / En a b l e au di o 1. In a view con sisting o f more than o ne channel, press the a rrow keys (Up/Down /Right/Left) to scroll through each channel that is displayed. The selected channel will be highlighted by white frame. Pressing t he “left” or “r ...

  • EverFocus ECOR264-16X1/1T - page 27

    19 Figure 2- 3 OSD Menu 1. In section 1 , there are ten setup options available. Use a rrow keys to highlight an icon and press “ Enter ” to select it. 2. In section 2 , the main choices for the selected icon will be disp layed. Use Up/Down arrow keys to highlight a cho ice and press “ Enter ” to select it. 3. In section 3 , all the options ...

  • EverFocus ECOR264-16X1/1T - page 28

    20 Bar : Press “ Enter ” key to activa te the slide r, then use arrow keys to adjust the setting. Press “ Enter ” again to finalize the changes. * Note about on-scr een keyboard: Use the arrow buttons to highlight each character and p ress the “ Enter ” key o n the front panel to inpu t the selected characters. When finishe d, h ighligh ...

  • EverFocus ECOR264-16X1/1T - page 29

    21 3 . G E N E R A L D V R O P E R A T I O N S This ch apter introduces the operations on major functions including pla yback, layout change, sequence, triplex operatio ns, copy, and search. 3 . 1 R E C OR D By default, the DVR will always be in reco rd mode. When the DVR is turned on, it will start to record. The exceptions a re: 1. DVR will no t ...

  • EverFocus ECOR264-16X1/1T - page 30

    22 + To input passwo rd by mouse : click the password field to b ring up the on-screen keyboard (see Figure 3-2 On-screen Keyboard). Click on ea ch button to input the desired characters f or the password. Whe n finished, click “ Done” on the on-screen keyboard to confirm the pas sword. + To input passwo rd using front panel: use the arrow keys ...

  • EverFocus ECOR264-16X1/1T - page 31

    23 3 . 5 P LA Y B A C K The playback bar is the fastest way to show vid eo from the exact time which users want to see. The playback bar allows a user to see both a time line and the current p layback indicator. The user can then click the time line to move the indicator to the po sition which they want to see. The ope ration is as follows: To play ...

  • EverFocus ECOR264-16X1/1T - page 32

    24 L4: Entire t ime bar is 10 minutes. L5: Entire t ime bar is 1 minute. 11. Express copy : Press to start express copy when camera d uring playback (only one camera) 12. Playba ck speed indicator 13. Press “X” to close the playback bar. 14. Start time for bar (the left-most point of the time bar) 15. Current p layback time (the time indicated ...

  • EverFocus ECOR264-16X1/1T - page 33

    25 10. Pattern Opera tion (Pattern is the “0” Tour in Everfocus and Pelco PTZ cameras) a. Click “ Pattern ” button 11. Steps to run a tour a. Click “ Tour ” button b. Click the number of the desired tour c. Click “ Go ” button 12. Steps to remove a tour (if supported by the camera) a. Click “ Tour ” button b. Click the number of ...

  • EverFocus ECOR264-16X1/1T - page 34

    26 Figure 3- 3 Express Control PTZ The screen is d ivided into a 4x4 grid. The function of each se ction is defined as below: • 1: PTZ pan/tilt left and up • 2, 3: PTZ tilt up • 4: PTZ pan/tilt right and up • 5, 9: PTZ pan left • 8,12: PTZ pan right • 13: PTZ pan/tilt left and down • 14, 15: PTZ tilt down • 16: PTZ pan/tilt right an ...

  • EverFocus ECOR264-16X1/1T - page 35

    27 3 . 7 L A Y O UT The E COR264 DVR has several display mode s ava ilable, depending on the number of cameras the DVR supports. The d ifferent available layouts for a 16 came ra model are shown below: NOTE: PIP d isplay is not available in Playback mode The first three layouts are available on all models; the next th ree (6, 8 and 9 cameras) are a ...

  • EverFocus ECOR264-16X1/1T - page 36

    28 3 . 9 D I S P L A Y Press the Display button o n the menu b y using the mouse or selecting this icon with the front panel keys and pre ssing ‘Enter’. Pressing/clicking cyc les through the four OSD formats: 1. Press to show camera information. Please see the f ollowing table for camera information icons. Recording Playback Fast forward Fast b ...

  • EverFocus ECOR264-16X1/1T - page 37

    29 3. Right -click to bring up the me nu b ar and click button. Or, p ress the ZOOM button on the front panel. 4. When in ZOOM mode, the mouse cursor will ch ange to a differen t icon in different areas of th e screen. Or, use the arrow keys to bring a different portion of the magnified image into view. Users can control the portion of the magnifie ...

  • EverFocus ECOR264-16X1/1T - page 38

    30 3 . 1 2 S E A R C H By mouse: Righ t-click to bring up the menu bar and click to enter Search Menu . By front pane l: Press ” Search ” key to enter Search Menu directly. 3. 12. 1 Ti me Sea r c h Figure 3- 5 Search Menu – T ime Search Play From : Select the time to begin the search by choosing the Date and Time. Click on the “ Play ” bu ...

  • EverFocus ECOR264-16X1/1T - page 39

    31 3. 12. 2 Ev ent S ea r c h Figure 3- 6 Search Menu – Even t Search From: Select starting date and time To: Select end ing date and time. Camera: Select which cameras to include in the search. Event: Sele ct which event type(s) to search for. Choose f rom Alarm, Motion or Video Loss. Click on the “ Searc h ” button to start searching. The s ...

  • EverFocus ECOR264-16X1/1T - page 40

    32 Prev Page : Go to previous page Next Page : Go to next page Play : Playback selected item Copy : Copy select ed item 3. 12. 3 Sm ar t S ea r ch Smart Search allows the revie w of a segmen t of the recorded video fro m individua l cameras to detect motion in an area specified at t he time of the sea rch. The resulting ‘mot ion events’ are dis ...

  • EverFocus ECOR264-16X1/1T - page 41

    33 Camera: Select which cameras to review. Grid Setting: Pre ss Grid Setting button to open the motion grid setup window. Edit Motion Gri d: Press this button to edit the motion grid (See Figure 4-5 Camera Menu – Motion Grid Setting ). Set All: Press this b utton to select the entire area. Clear All: Press this button to clear all the grids sele ...

  • EverFocus ECOR264-16X1/1T - page 42

    34 Click on the “ Searc h ” button to start searching. The search results will be shown as a list of events. Prev Page : Go to previous page Next Page : Go to next page Play : Playback selected item Copy : Copy select ed item ...

  • EverFocus ECOR264-16X1/1T - page 43

    35 3. 12. 4 Sn ap s h ot S ea r ch Snapshot Search shows snapshot s of the specified interval, it helps users to quickly find the interested scene. Figure 3- 8 Search Menu – Sna pshot Search Result Type : Select result type. Search Date: Sele ct search date and time Search Direction: Se lect search direction, either fo rward or backward. Search C ...

  • EverFocus ECOR264-16X1/1T - page 44

    36 Figure 3- 8 Search Menu – Sna pshot Search r esult ...

  • EverFocus ECOR264-16X1/1T - page 45

    37 3 . 1 3 C O P Y To bring up Copy menu: By mouse: Righ t-click to bring up the menu bar and click on to enter Copy Menu . By front pane l: Press the “ Copy ” key to enter Copy Menu directly. Figure 3- 10 Copy Menu Camera: Select which cameras will be archived. Choose “ Select All ” to select all the ca meras. Player: Che ck the box to inc ...

  • EverFocus ECOR264-16X1/1T - page 46

    38 3 . 1 4 L O G O UT Right-click to bring up the men u bar and click the button to b ring up the Logout C onfirmation window (see Figure 3-11). Figure 3- 11 Logout Confirm ation window Press “ Yes ” button when y ou are ready to logout from the system. You will need t o login again before accessing an y other configuration options. ...

  • EverFocus ECOR264-16X1/1T - page 47

    39 4 D V R C O N F I G U R A T I O N This chap ter will walk you throu gh the DVR Menu Settings step by step and show you how to set the DVR for your specific app lication. 4 . 1 C ON F I GU R A T I O N M E NU 1. To b ring up the Main Menu, press the “ Menu ” key on the front panel or right-click with the USB mouse to bring up the O SD menu bar ...

  • EverFocus ECOR264-16X1/1T - page 48

    40 Date: Sets the current date of DVR. Time: Set s the current time of DVR. Record Mode: Cho ose from Normal+Event : Normal recording plus event recording . Event Only: Event recording only. Schedule Re c: Schedule recording. For Event reco rding, enter the estimated number of hours per d ay for event recording. Resolution: Sele ct recording resolu ...

  • EverFocus ECOR264-16X1/1T - page 49

    41 Network Type : Static IP: Use r sets a static IP for network connection. DHCP: DHCP server in LAN will automatically assign IP fo r network connection. PPPoE: This is for direct DSL connection application O NLY (no router). Check with your ISP to see if they use PPPoE. IP Address : This f ield shows the cu rrent IP Address for the DVR. If Fixed ...

  • EverFocus ECOR264-16X1/1T - page 50

    42 4 . 3 C A M E R A S E TT I N G Figure 4-2 is a screenshot of the CAMERA SETTING MENU . This menu is used to configu re individual camera set tings. Figure 4- 2 Camera Menu -Basic Setting 4. 3.1 Ba s i c S et ti ng Camera: Select the camera to be configured. Title: Th e t itle setting allows yo u to assign a t itle to the s elected camera. Each t ...

  • EverFocus ECOR264-16X1/1T - page 51

    43 Covert: Check t he box to hide the ca mera picture in live and se quence modes. However, th e image will still be recorded and can be played back by any user who ha s playback rights . Record Mode: 2 record modes are available. Normal + Event: This recording mode includes continuous a nd event recording. Event Only: Video will be recorded only w ...

  • EverFocus ECOR264-16X1/1T - page 52

    44 Recording capacity remaining for all cameras (shown to the right of the Normal Speed field ) : The number here indicate s the remaining unallocated recording ca pacity available for all cameras, s caled according to the image size selected for the current camera . That is, the number shown is the number of available FPS at that image size (which ...

  • EverFocus ECOR264-16X1/1T - page 53

    45 4. 3.2 Vi de o A dj u st Figure 4- 3 Camera Men u – Video Adjust Camera: Select the camera you wish to adjust. “Title” will cha nge to the name of the sele cted camera. Brightness: Ad justs how bright/dark the picture app ears. If details appear to be lost in the shadows or darker regions, try increasing the Brightness. If the image a ppea ...

  • EverFocus ECOR264-16X1/1T - page 54

    46 4. 3.3 Mo t i on Figure 4- 4 Camera Men u – Motion Camera: Select the camera you wish t o configure. “Title” will chan ge to the titl e name of the selected camera. Enable: Ch eck box to enable motion detection. Other mot ion options will no t be available un less this feature is sele cted. Log: Check this box to record motion events in th ...

  • EverFocus ECOR264-16X1/1T - page 55

    47 Network Alarm: Check this bo x to send o ut a network alarm to a client PC when motion occurs. (Th is feature requires PowerCon software on t he client PC and proper settings for the Alarm Server in the Network Setup menu; see Section 4.6.4 Alarm Server for more information.) Auto Lock : Check the b ox and the events will be recorded in a write ...

  • EverFocus ECOR264-16X1/1T - page 56

    48 3. Press E nter key to display grid. 4. Use a rrow keys to choose one corner of de sired area 5. Press E nter key at the starting point . 6. Use a rrow keys to select motion area ; the shape of the proposed area will be displayed. 7. Press E nter key at the end point, and the a rea will be selected. 8. Press t he Menu key to exit the a rea selec ...

  • EverFocus ECOR264-16X1/1T - page 57

    49 4. 3.4 Vi de o L os s Figure 4- 6 Camera Menu – Video Loss Camera: Select the camera you wish t o configure, “Title” will chan ge to the titl e name of the selected camera. Enable: Check box to enable Video Loss detection. Log: Check bo x to record video loss events in the log. Pre-alarm Record: Check box to sta rt copying reco rded video ...

  • EverFocus ECOR264-16X1/1T - page 58

    50 Transparent: Alarm o utput continues as long a s there is a video loss. Trans+Timeout : Alarm output continues until the event ends, then continues for a set t ime duration. Apply To: This button can be used to copy the video loss settings to other cameras. Select which cameras you wish to copy to. "Select All" selects all cameras, “ ...

  • EverFocus ECOR264-16X1/1T - page 59

    51 4. 4.1 Re co r d Record Ove rwrite: Che ck the box and th e disk will beg in o verwriting when full. NOTE: Unless this box is checked, THE DVR MUST STOP RECORDING WHEN THE DI SK IS FULL. The use of rec ord overw rite is strongly recommended. If you do not use th is feature, please be sure to make specific a rrangements to monitor/be notifie d wh ...

  • EverFocus ECOR264-16X1/1T - page 60

    52 Figure 4- 8 Record & Play Menu- Built-in Cal. Motion: Enter th e expected number of hours per day due to motion recording. Alarm: Enter the expected number of hours per da y due to alarm recording. If the total of Mo tion and Alarm h ours is more than 2 4 hours, th e calculator will assume that mo tion and alarm recording take place for the ...

  • EverFocus ECOR264-16X1/1T - page 61

    53 4. 4.3 Pl a y Figure 4- 9 Record & Play Menu - Play Quick Playback: Ch eck the box to enable the Quick Playba ck function as described belo w. Playback From X Seconds ago: When th e DVR is put into p layback (press PLAY), it will begin playing from the select ed time. Choose from 60 to 3600 secon ds prior to the present time. If Quick P layb ...

  • EverFocus ECOR264-16X1/1T - page 62

    54 4 . 5 A LA R M & EV EN T S E T T IN G Figure 4-10 is a screenshot o f the ALARM & EVENT SETTING ME NU . This menu will guide you through alarm and event setup. Figure 4- 10 Alarm & Event Menu - Alarm 4. 5.1 Al a r m Alarm: Select t he ala rm input trigger connect ion nu mber from 1 to 4 (or 9 or 16 – one trigger per c amera input). ...

  • EverFocus ECOR264-16X1/1T - page 63

    55 Record: Sele ct which camera(s) will start recording in response to this alarm event. Email Notify: Check box to ena ble e mail notification when an alarm occurs. Email operation requires that valid email se ttings have been e ntered in the Netwo rk Setting/Email setup scre en. (See Section 4.6.2 Email for more informatio n.) Input Type: This fi ...

  • EverFocus ECOR264-16X1/1T - page 64

    56 ...

  • EverFocus ECOR264-16X1/1T - page 65

    57 4. 5.2 Ev en t This section cov ers notifications due to internal system event warnings. Figure 4- 11 Alarm & Event Menu – Event Event: Sele ct from the following event types. Fan Failure: Fan is not working. HD Temperatu re: Hard drive is over the safety warning tempe rature. HD Failure: If DVR fails to detect the HDD on start up, the sys ...

  • EverFocus ECOR264-16X1/1T - page 66

    58 Fan Failure : Figure 4- 12 Alarm & Event Menu – Event – Fan F ailure Log: Check bo x to record fan failure events in the log. Buzzer: Check box to enable buzzer when fan is not working . Email Notify: Check box to enable ema il notification when fan is not working. Email o peration requires that valid ema il settings have been entered in ...

  • EverFocus ECOR264-16X1/1T - page 67

    59 HD Temperature : Figure 4- 13 Alarm & Event Menu – Event - HD Tem perature Log: Check bo x to record HDD temperature events in the log. Buzzer: Check box to enable buzzer when hard drive’s temp erature is over the “Temp. Warning Limit” . Email Notify: Check box to enable ema il notification when HDD temp erature is ov er the “Temp. ...

  • EverFocus ECOR264-16X1/1T - page 68

    60 HD Failure: Figure 4- 14 Alarm & Event Menu – Event - HD Failu re Log: Check bo x to record events in the log. Buzzer: Check box to enable the buzzer if no hard d rive is detected on system startup. Email Notify: Check box to e nable email notification funct ion when HD fails. Email op eration requires t hat valid email se ttings have been ...

  • EverFocus ECOR264-16X1/1T - page 69

    61 HD Full: Figure 4- 15 Alarm & Event Men u – Event - HD Fu ll Log: Check bo x to record events in the log. Buzzer: Check box to enable the buzze r when h ard drive is full (reco mmended if the Record Ove rwrite function is d isabled. See Section 5.4.1). Email Notify: Ch eck box to enab le e mail notification when HD is full. Email operation ...

  • EverFocus ECOR264-16X1/1T - page 70

    62 HD Off: Figure 4- 16 Alarm & Event Menu – Event - HD Off Buzzer: Ch eck box to e nable buzzer if th e hard drive is tu rned off (disconne ct ed) or becomes d isabled (cannot be dete cted by the system). Email Notify: Check box to en able ema il notif ication when HD is of f. Email operation requires that valid email settings have been ente ...

  • EverFocus ECOR264-16X1/1T - page 71

    63 Power Loss: Figure 4- 17 Alarm & Event Menu – Event – Powe r Loss Log: Log is perman ently checked for this feature. Po wer Loss events are always recorded by the DVR. Email Notify: Check box to enable e mail notification when power h as been restored. Email operation requires that valid email settings have been entered in the Network Se ...

  • EverFocus ECOR264-16X1/1T - page 72

    64 Record Stop: Figure 4- 18 Alarm & Event Menu – Event – Record Stop Log: Check bo x to record events in the log. Buzzer: Check box to enable buzzer if the recording process is terminated. Email Notify: Che ck box to enable email notificatio n when the recording proce ss is terminat ed. Email operation requ ires that valid email settings h ...

  • EverFocus ECOR264-16X1/1T - page 73

    65 Network Loss : Figure 4- 19 Alarm & Event Menu – Event – Network L oss Log: Check bo x to record events in the log. Buzzer: Check box to enable buzzer when network is lost. Alarm Output: This will tra nsmit a sign al through the alarm outp ut relay. It can be set to either “ NONE ” (not active), “ 1 ” (active) or “ 2 ” (activ ...

  • EverFocus ECOR264-16X1/1T - page 74

    66 4 . 6 S C H E D U LE S ET T I NG Figure 4 - 20 is a scree nshot of the SCHEDULE SET TING MENU . In this menu you can set a unique configuration to enable recording d uring a specified time period s. This menu is used to config ure Express Setup, Holidays and detailed Schedule settings. Figure 4- 20 Schedule Menu- Express Setup 4. 6.1 E x pr e ss ...

  • EverFocus ECOR264-16X1/1T - page 75

    67 Event Frame Ra te: FPS re cording rate for e vents. Selectable frame rate in cludes 30fps, 15fps, 10fps, 7.5fps, 5fps, 1fp s or 0fps. (0fps means no event re cording). Event Action: Ch eck this box to enable Buzzer, Alarm out , E-mail and Netwo rk actions selected else where when an event o ccurs during the selected time pe riod. Apply: P ress ? ...

  • EverFocus ECOR264-16X1/1T - page 76

    68 One time: This ent ry is used only once, on that specific date. Month/date: Uses this e ntry on the same month and day, e very year (e.g. January 1 for New Y ear’s Day) Month/weekday: Uses this en try on a specific day of a specific wee k in the month specified (e.g 4 th Thursday in Nove mber for Thanksgiving). Details: Specif ies the date to ...

  • EverFocus ECOR264-16X1/1T - page 77

    69 To Set Schedule using Mouse 1. Click on desire d start time block (no numbers on it) on a time b ar. At this t ime, the selected t ime block will b e h ighlighted in b lue frame and the entire time bar will be h ighlighted by red frame. The re are 24 blocks on the t ime bar representing 24 hours respect ively. 2. Se t a schedu le start t ime by ...

  • EverFocus ECOR264-16X1/1T - page 78

    70 3. Se lecting camera : Use Right/Left arrow keys to se lect desired camera to configure. Selected camera number will be highlighted by a blue frame. See abo ve image. 4. Enter time bar editing mode : Use Up /Down arrow key to switch to time bar editing mode . Wh en this mode is se lected, all 9 time bars will be highlighted within a blue frame. ...

  • EverFocus ECOR264-16X1/1T - page 79

    71 7. Changing recording mode (color) of a timezone : Use Right/Lef t arrow key to switch to t he first block (with nu mber on it) o f a timezone. Clicking Enter b utton, and t his timezone will switch to another color, which mean s switching to another record mode. The color switch s equence is gray->orange->blue. 8. To e xit the screen, pre ...

  • EverFocus ECOR264-16X1/1T - page 80

    72 Resolution: Sele ct recording resolution. NTSC: 704 x480 / 704x240 / 352x240 PAL: 704x576 / 704x288 / 352x288 Normal: Frame rate in images per second for continuous recording. I t is important to keep track of the normal recording resources b eing a llocated at each hours of the day. I ncreasing the Normal recording resolution an d/or rate can i ...

  • EverFocus ECOR264-16X1/1T - page 81

    73 CIF equiva lent FPS still available to be assig ned to one or more of th e nine CIF resolution cameras. I f not all e vent conditions occur simultaneously, greater resolution and/or FP S increases are po ssible for individual camera s, as long as the net total of 480 CIF equivalents is not exceeded. Action : Check this box t o enable notifica ti ...

  • EverFocus ECOR264-16X1/1T - page 82

    74 4. 6.4 Al ar m Ac t i on Figure 4- 24 Schedule Menu-Alar m Action Defines recording response to “alarm” input trigge r signals by t ime of day on specific d ays of the we ek and/or ho lidays and ‘other’ days. Alarm: S elect a number to change the sch edule for that alarm input trigger. Each alarm can be set o n a 2 4 hour t ime block f o ...

  • EverFocus ECOR264-16X1/1T - page 83

    75 4. Cha nge the se ction to different mode (with a different co lor) by clicking on the first block of the section. The color switches from gray -> orange -> g ray, every time user clicks the f irst blo ck o f a section. Orange indicates ‘alarm action recording ON’. 5. To set the end of a timezone, select the time block following the en ...

  • EverFocus ECOR264-16X1/1T - page 84

    76 6. Editing blocks in a time bar : when a time bar is chosen (highlighted in red frame), the press Enter b utton to se lect that time bar f or configuration; then t he first block of this bar will be selected (highlighted in blue f rame). Use Right/Left a rrow key to move to the desired block for the starting time , and press the Enter button a g ...

  • EverFocus ECOR264-16X1/1T - page 85

    77 Apply to Ca meras: This button can be used to copy sche dules to o ther ca meras. Select which c ameras you wish to copy to . "S elect All" select s a ll cameras, “Cl ear A ll” de selects all cameras. Click “OK” to copy the settings or "Ca ncel" to exit without copying. ...

  • EverFocus ECOR264-16X1/1T - page 86

    78 4 . 7 N E T W O R K S E T TI N G Figure 4-25 is a screenshot of the NETWORK SETTING MENU . This me nu is for con figuring the DVR for a network connectio n. NOTE: Since every Network Configu ration is different, please check with your Network Administrato r or ISP to see if your DVR should use specific IP addresses and/or port numb ers. Figure 4 ...

  • EverFocus ECOR264-16X1/1T - page 87

    79 DNS Server 2 : This field shows the secondary DNS server for your n etwork. HTTP Port: Port numb er for HTTP/WEB commun ication. Additional in formation: 1. Set up the DV R Network Menu according to the instructions detailed in the Networking chapter of this DVR’s manua l. a. If using DHCP, a ll settings will be detected auto matically. While ...

  • EverFocus ECOR264-16X1/1T - page 88

    80 • Well Kno wn Ports 0 thru 1023 • Registe r ed Ports 102 4 thru 49151 • Dynamic and/ or Private Ports 49152 thru 65535 So, rather tha n encoun ter a p ort co nflict by choosing a port co mmonly u sed for another purpose (like po rt 25 for S MTP mail or p ort 44 8 for secure sockets), choose an ‘unusual’ port n umber. For example , add ...

  • EverFocus ECOR264-16X1/1T - page 89

    81 Authentication: Check this box if the SMTP server requires au thentication (user name / password). SSL: Check the box if mail server needs communicat ion to be encrypted by SSL. User name: Inpu t the login user name if the S MTP server requires authentication. Password: Input the password if the SMTP server requires aut hentication. Confirm: Re- ...

  • EverFocus ECOR264-16X1/1T - page 90

    82 The DDNS name you choose must be unique; that is, it must n ot already be in use. Please go to the website http://e verfocusddns.com and check that the name you wish to use is available. PLEASE NOTE : The name of the DVR cannot include a space, or a dot (period) or any spec ial characters pa rticularly ~ ! @ # $ % ^ & * ( ) + < > " ...

  • EverFocus ECOR264-16X1/1T - page 91

    83 Confirm : Re-ent er password. Note: For more de tails on DDNS setup, please see “Chapter 7 - Everfocus DDNS Setup”. 4. 7.4 Al ar m Se r v er Figure 4- 29 Network Menu – Alarm Server This menu def ines the parameters for communicating with a PC running PowerCon software. Server IP1~3 : IP address of client PC with installed PowerCon S oftwa ...

  • EverFocus ECOR264-16X1/1T - page 92

    84 4 . 8 D I S K I N FO R M A T IO N 4-30 is a screenshot of the DISK INFORMATION MENU . Th is menu is used to re view the DVR’s hard drive settings and st atus. No values in this screen can be changed by the operator. Figure 4- 30 Disk Menu-Disk 4. 8.1 Di sk Record Time (Start): Shows earliest recorded time on the DVR. Record Time (End): Shows l ...

  • EverFocus ECOR264-16X1/1T - page 93

    85 4. 8.2 Loc k 4-31 is a screenshot of the DIS K LOCK/FORMAT MENU . This menu is used to cont rol the portion of the DVR’s hard d rive reserved for locked event recordings, and to format drives(s) if necessary. Figure 4- 31 Disk Menu-Lock/F ormat Maximum Lock (%): Se ts the maximum lock percentage of the HDD volume. After setting the lock percen ...

  • EverFocus ECOR264-16X1/1T - page 94

    86 4 . 9 D IS PL A Y S E T TI N G Figure 4 -32 is a screenshot of t he DISPLAY SETTING MENU . This menu will wa lk you t hrough the Main Monitor On -Screen Display (OSD) and Main Monitor Sequ ential setup. Figure 4- 32 Display Menu – M onitor OSD 4. 9.1 M o ni tor O S D These are the display options for the Main Monitor. Main Monitor Camera Ti tl ...

  • EverFocus ECOR264-16X1/1T - page 95

    87 Call Monitor These are the display options for the Call Monitor. Camera Ti tle: Check the box to display camera title s. Date/Time: Check the box to display current date/time . ...

  • EverFocus ECOR264-16X1/1T - page 96

    88 4. 9.2 M a i n M / T S EQ Figure 4- 33 Display Menu – M ain M/T SEQ Step: Sequen ce order. For reference. Camera: Select which camera appears in the current step . Dwell (sec): Se t the dwell time for each step. Sequence dwe ll time can be set from 0 to 99 second s. Sequence repea ts continuously from steps 1 through 20 until interrupted. ...

  • EverFocus ECOR264-16X1/1T - page 97

    89 4. 9.3 C a ll M /T S EQ Figure 4- 34 Display Menu – M ain M/T SEQ Step: Sequen ce order. For reference. Camera: Select which camera appears in the current step . Dwell (sec): Se t the dwell time for each step. Sequence dwe ll time can be set from 0 to 99 second s. Sequence repea ts continuously from steps 1 through 20 until interrupted. ...

  • EverFocus ECOR264-16X1/1T - page 98

    90 4 . 1 0 SY S T E M S E T T I N G Figure 4-35 is a scre enshot o f the SYSTE M SETTING MENU . This menu is f or se tting up the general system para meters for the DVR. Figure 4- 35 System Menu – Date/Time 4. 10. 1 Da t e/ T i me Date: Set current Date. Time: Set curren t Time. Date Format: Cho ose date format from yyyy/mm/dd, dd/mm/yyyy, an d m ...

  • EverFocus ECOR264-16X1/1T - page 99

    91 4. 10. 2 Da y l ig h t S avi ng Figure 4- 36 System Menu – Daylight Saving Daylight Saving: Ch eck the box to enable automatic dayligh t saving time adjustment . Start Date: Set the start date for daylight saving time. Start Time (hh:mm): S et the time when daylight saving time begins. Set To (hh:mm): This is what the time will change to when ...

  • EverFocus ECOR264-16X1/1T - page 100

    92 4. 10. 3 Us er User Menu is where you can add or delete d ifferent login IDs on th e system as well as set access levels. See the cha rts below for a listing of the rights asso ciated with each access level. Figure 4- 37 System Menu – Use r Add Click “Add” button to add a ne w user. Set the name (case-sensitive), pass word, access le vel a ...

  • EverFocus ECOR264-16X1/1T - page 101

    93 Edit Click “Edit” button to make ch anges to an existing user accou nt. Pres s “Save” b utton to save changes or “Cancel” to exit with out making changes. Figure 4- 39 System Menu – Use r - Edit User Login: Check this box to require user login f or men u access from t he front panel. Whe n this is disabled, no u sername or passwo r ...

  • EverFocus ECOR264-16X1/1T - page 102

    94 There are th ree system access levels. The following ch arts show the rights of each level. Main Menu at the DVR User Level and Right RIGHT ADMINISTRAT OR MANAGER OPERATO R Playback OK OK NO PTZ OK OK NO Layout OK OK O K Channel OK OK O K Display OK OK O K Sequence OK OK O K Monitor OK OK O K Zoom OK OK NO Search OK OK NO Copy OK OK NO Config. O ...

  • EverFocus ECOR264-16X1/1T - page 103

    95 4. 10. 4 I/O C on t r ol Figure 4-40 is a screenshot o f the I/O Control Setting Men u. Th is menu is used to define the settings for controlling the DVR through RS485, and for DVR control of a ttached PTZ cameras. Figure 4- 40 System Menu – I/ O Control RS232 Baud Rate: Th is field is to se t the speed at which is used to transmit instruction ...

  • EverFocus ECOR264-16X1/1T - page 104

    96 Baud Ra te: The speed u sed to transmit instructions or inf ormation through th e RS4 85 port on the DVR. Choose from the following speeds: 1200, 2400, 4800, 960 0, 19200, 38400, 57600, 115200 BP S. Data Bit: The numb er of data bits used in a data packet or word. This can be set to 8 or 7. Stop Bit: This field is to set the number of stop b its ...

  • EverFocus ECOR264-16X1/1T - page 105

    97 unit during the upgrade ; th is can cause the system to fail to recover, requiring fa ctory service to repa ir. Configurations Load Factory Defa ult: Click “ Load ” to restore all menu settings to the default values. User Account , Network IP Set tings, and Time are not affected. 3GP s treaming is disabled by default. Load From USB: Click ? ...

  • EverFocus ECOR264-16X1/1T - page 106

    98 4 . 1 1 I N F O R M A T I ON Figure 4.42 is a screenshot of t he INFORMATION MENU . Th is menu displa ys important (read only) syst em information . Figure 4- 42 Information M enu – System 4. 11. 1 Sy st em System Version: Displa ys firmware version number. Model: Displays DVR mo del number. NTSC/PAL: Displays cu rrent video format selected ba ...

  • EverFocus ECOR264-16X1/1T - page 107

    99 4. 11. 2 L o g Figure 4- 43 Information M enu – Log This screen is used to choose, display and/or export log entries. From Date: Select starting date of log to be displayed. Time: Sele ct starting time of log to be displayed. To Date: Select end date of log to be displayed. Time: Sele ct end time of log to be displayed. Log Type: Configuration ...

  • EverFocus ECOR264-16X1/1T - page 108

    100 Export Log to USB: Pre ss “ Export’ bu tton to export log data to USB . Figure 4- 44 Log List Prev Page : Go to the previous page of log. Next Page : Go to the next page of log. Close : Close the win dow ...

  • EverFocus ECOR264-16X1/1T - page 109

    101 5 N e t w o r k i n g O v e rv i e w This ch apter will g ive you a basic instruction on h ow to set up t he DVR f or net work connection. It is highly recommended t hat yo u have a wo rking knowledge of wha t a netwo rk is a nd h ow it works. Th is will b e helpful in co mpleting the networking process. 5 . 1 I n t r o d uc t i o n t o T C P / ...

  • EverFocus ECOR264-16X1/1T - page 110

    102 5 . 4 V i r t ua l P o r t s A port number represents a "channel" or ent ryway for network communications. Port numbers allow different computers to utilize network resources without interfering with e ach othe r. Port numbers most commonly appear in network programming, particular ly socket programming. Sometimes, though, port number ...

  • EverFocus ECOR264-16X1/1T - page 111

    103 The modem/rou ter wa s either installed b y you r Inte rnet se rvice pro vider o r p urchased by you to establish a connection to the Internet. A router assigns different internal IP addresses to local computers; this allows multiple co mputers t o a ccess th e Internet throug h the same external IP address. Do you have a static IP address? ___ ...

  • EverFocus ECOR264-16X1/1T - page 112

    104 2. Direct High Speed Modem Connection: A direct modem co nnection uses a standard network cable to connect the mo dem directly to a computer (or in this case a modem to th e DVR). This t ype of connection only co vers single-port modems. For a combination modem/route r, use the setup described be low. 3. Rou ter or LAN Connection – A local ar ...

  • EverFocus ECOR264-16X1/1T - page 113

    105 Connection Proc edure:  The First step is to purchase or make a cross-over cable. We recommend purcha sing o ne if you have neve r made a cross-over cable. Please remember you can n ot use a straight through network cable for this ap plication  Once you have a cross-over cable plug one end into the LAN port on the back of the DVR and the ...

  • EverFocus ECOR264-16X1/1T - page 114

    106 ...

  • EverFocus ECOR264-16X1/1T - page 115

    107 ...

  • EverFocus ECOR264-16X1/1T - page 116

    108  Click on the option that says “ Use the following IP address”  Assign an IP address of 192.168.1.2, a Subnet Mask of 255.255.255.0, and a Default Gateway of 192.168.1.1, the n click OK.  Restart both the comp uter and the DVR.  To access the DVR fro m the computer, simply open In ternet Explorer and in the address b ar type: ht ...

  • EverFocus ECOR264-16X1/1T - page 117

    109 5 . 8 D i re c t H i g h S pe ed Mo d e m C o n n e c t i o n Straight Through Ethe rnet Cable Pin outs: The Figure be low shows the pin configurations for a st raight cable. Connection Proc edure:  The first step is to purchase or make a straight through cable. We recommend purchasing one if you have ne ver made a straight through cable. P ...

  • EverFocus ECOR264-16X1/1T - page 118

    110  Log into the EverFo cus DVR menu and go to the Network Setting Menu.  Input the Static IP address, the Subnet Mask, and the G ateway that you obtained fro m the int ernet service provide r.  Note: If yo u have a dynamic I P address, you can set the DVR to DHCP to automatically de tect the network settings. Therefore, it can use a dyna ...

  • EverFocus ECOR264-16X1/1T - page 119

    111 5 . 9 R o u te r o r L A N C o nn e c t i o n Straight Through Ethe rnet Cable Pin outs: The Figure be low shows the pin configurations for a st raight cable. Connection Proc edure:  The First step is to purcha se or make a straight through ca ble. We recommend purchasing one if you have ne ver made a straight through cable. P lease reme mbe ...

  • EverFocus ECOR264-16X1/1T - page 120

    112  Once you have a s traight through cable plug one end into the LAN port on the ba ck of the recorder and the other in to the router.  Log into the EverFo cus DVR menu and go to the Network Setting Menu.  To let the router automat ically assign an address:  Set the Network Type to DHCP. Make sure to write down the IP address and the ...

  • EverFocus ECOR264-16X1/1T - page 121

    113 number o f the IP address. For example, if th e IP address of the computer is 192 .168.2.101, the DVR’s IP address should be 192.168.002.050.  To access the DVR fro m a computer simply open Internet Explorer and in the address bar type: http:// (IP address of the DVR)  Note: The DVR’s IP address will only work at the locat ion o f the ...

  • EverFocus ECOR264-16X1/1T - page 122

    114 6 R E M O T E O P E R A T I O N F R O M B R O W S E R 6 . 1 C O NN E C T I N G T O EC O R 26 4 To access the DVR from a computer, open an Internet Explorer window and in the addre ss bar type: Local connectio n: http:// (IP address from the DVR’s Ne twork Menu): IP port used e.g. http://192 .168.1.163:2468 Internet connectio n: http:// (IP ad ...

  • EverFocus ECOR264-16X1/1T - page 123

    115  Enter a user name and p assword to access the re corder. These can be ch anged in the System section of the Main Menu.  The default user na me is “ admin”. The d efault password is “11111111 ”.  Click on the Login bu tton and you will log in to the reco rder’s Network Viewer. 6 . 2 B R O W S E R S E C U R I T Y S E T T I N G ...

  • EverFocus ECOR264-16X1/1T - page 124

    116 Install the ePlus DVR.cab file when prompted to do so. Once the file fin ishes installing, you will return to the screen like the one below. ...

  • EverFocus ECOR264-16X1/1T - page 125

    117 Right click on the yellow bar and select “Run Add -on…” Install the MSX ML file when prompted to do so. Now, you will able to see the remote live page. ...

  • EverFocus ECOR264-16X1/1T - page 126

    118 6. 2.2 E na bl ing A c t iv eX C o nt rol s Note: This section is only necessary if you DO NOT see the yellow ActiveX bar at the top of your browse r screen when you first connect to the DVR. At the top of the Internet Explorer Window, click on Tools, then select Internet Options. Click the Se curity tab at the top of the window, then choose Cu ...

  • EverFocus ECOR264-16X1/1T - page 127

    119 In the Security Set tings window, scroll to “ActiveX cont rols and plug-ins” Set the cont rols as follows: “ Enable ”:  Allow previo usly unused ActiveX controls to run wit hout prompt ( Internet Exp lorer 7 only )  Allow scriptlet s ( IE7 only )  Automatic p rompting for ActiveX controls  Binary and script behaviors  Dis ...

  • EverFocus ECOR264-16X1/1T - page 128

    120 Close the window so you are back at the login sc reen. Click the Refre sh button to reload the page. Install the ePlus DVR.cab file when prompted to do so. Once the file fin ishes installing, you will return to the sam e login page as before. Type in the use r name and password and click Lo gin to view the cameras. Default user name : admin Def ...

  • EverFocus ECOR264-16X1/1T - page 129

    121 6 . 3 R E M O T E L I V E V IE W 1. Click on a camera number on the left sid e of the display to switch tha t camera to full screen. Click on “4UP” to display 4 screens, click on “9UP” to display 9 screen s or click on “16IP” to display 16 screens. 2. Yo u can click the “ Mic ” button to tra nsfer audio to DVR from client sid e ...

  • EverFocus ECOR264-16X1/1T - page 130

    122 Schedule Setup Network Se tup Hard Disk Se tup Display Se tup System S etup Informat ion Setup Video Export Playb ack Search P TZ Control 5. In the main page, you will see live images in a 16-screen display (or 4 or 9 screens, de pending on the model). ...

  • EverFocus ECOR264-16X1/1T - page 131

    123 6 . 4 R E M O T E P LA Y B A C K To playback the vid eo, click th e “Search ” but ton. Select from “Time Search”, “Eve nt S earch”, o r “Motion Search”. For more details about Search setting, please refer t o “3.12 Search Setting”. “Event Se arch” a nd “Motion Search” will show maximum 400 se arch result items (begin ...

  • EverFocus ECOR264-16X1/1T - page 132

    124 7 E V E R F O C U S D D N S S E T U P Setup Steps: Step 1. Set up the Network Menu accord ing to the in structions detailed in th e Networking chapter. (Make sure that DNS Server 1 is set correctly or DDNS will not work) Step 2. Go to the web site http://everfocusddns.com an d check for an available name. Note: This step is optional, though rec ...

  • EverFocus ECOR264-16X1/1T - page 133

    125 settings and DDNS name and resubmit the DDNS name until you get “Success” . Step 5. You shou ld now be able to connect by typing the name you created into the address bar. Example: http:// hostname.everfocusddns.com It is not necessa ry to append the HTTP port number to the DDNS name. The EverFocus DDNS server not only keeps t rack of your ...

  • EverFocus ECOR264-16X1/1T - page 134

    126 8 L I N K S Y S & D - L I N K P O R T F O R W A R D I N G 8 . 2 T Y P I C A L L I N K S Y S P O R T FO R W AR D IN G This section will cover a few simple conf igurations for th e Linksys router. This chapter is only to offer some help to the installer and end user. P lease understand we DO NOT support this produ ct and will no t give tech s ...

  • EverFocus ECOR264-16X1/1T - page 135

    127 Applications a nd Gaming allows you t o set up public se rvices on your network, such as web servers, ftp servers, e-mail servers, or other specialized Internet applica tions. (Some Internet applications ma y not require a ny forwarding) To f orward a port, enter the information on each line for the crite ria required. Descriptions of each crit ...

  • EverFocus ECOR264-16X1/1T - page 136

    128 8 . 3 T Y P I C A L D - L I N K PO R T F O R WA RD I N G This section will cover a few simple configu rations for the D-Link router. This chapter is on ly to offer some help to the installer and end user. P lease understand we DO NOT support this produ ct and will no t give tech support on it. If you need additional techn ical support on this r ...

  • EverFocus ECOR264-16X1/1T - page 137

    129 Click Virtual Se rvers on the left to bring up the follo wing screen. Virtual Se rvers allows users who are connecting re motely to access services on the route r’s Local Network. The functions o f each field are described below. Virtual Server - S elect Enabled or Disabled Name - Enter the name referencing the virtual service Private IP - Th ...

  • EverFocus ECOR264-16X1/1T - page 138

    130 Here is an exa mple of the information for each service: Name Private IP Protocol Private Port Public Port Schedule HTTP 192.168.1.50 Bo th 80 80 Enable Where 192.168 .1.50 is the IP address of the ECO R264 on the LAN, and the defau lt port 80 is in use . Note: If you change d port 80 in the DVR’s Network Menu, open that port instead of 80 . ...

  • EverFocus ECOR264-16X1/1T - page 139

    131 9 T R O U B L E S H O O T I N G If you have proble ms with the system, run through the following checklist to see if you can solve the problem.  The DVR w ill not go into record mode.  B ring up the DVR’s Menu and check under the Ca mera Menu. Verify that all connected ca meras are checked as “ Installe d” and that Record Mode is se ...

  • EverFocus ECOR264-16X1/1T - page 140

    132  Ma ke sure you are using the correct WAN IP add ress given b y the ISP , or, if you have a Dynamic IP, check if the IP address h as changed; u se DDNS to avoid p roblems caused by cha nging ISP addresses. ...

  • EverFocus ECOR264-16X1/1T - page 141

    133 A P P E N D I X A : T I M I N G O F A L A R M M O D E S Transparent Mo de Input Event Alarm Duration t t Event = t Reaction t Event : Duration of a larm input source (motion, contact, system events...) t reaction : Re sulting duration for th is alarm mode, related to event record, alarm outputs, OSD message, buzzer Timeout + Transp arent Mode t ...

  • EverFocus ECOR264-16X1/1T - page 142

    134 Timeout Mode t Input Event Alarm Duration t Duration = t Reaction t Event t Event : Duration of a larm input source (motion, contact, system events...) t Duration : A larm duration for timeout, defined in the event setup menus t reaction : Re sulting duration for th is alarm mode, related to event record, alarm outputs, OSD message, buzzer Perm ...

  • EverFocus ECOR264-16X1/1T - page 143

    135 Timeout Mode: Retrigger of Alarms t Event : Duration of a larm input source (motion, contact, system events...) t Duration : A larm duration for timeout, defined in the event setup menus t reaction : Resulting duration for this alarm mod e, related to event record, alarm outputs, OSD message, buzzer Timeout+Tran sparent Mode: Retrigger of Alarm ...

  • EverFocus ECOR264-16X1/1T - page 144

    136 A P P E N D I X B : E X P R E S S S E T U P R E C O R D I N G V A L U E S E L E C T I O N R U L E S Case 1: Record Mode: Normal + Event Record With: Recor ding days The DVR will Auto adjust image Quality and Event frame rate to match the number of Rec ording days which user selected: According to resolution, event hours and other assu mptions a ...

  • EverFocus ECOR264-16X1/1T - page 145

    137 Case 3: Record Mode: Normal + Event or Event Only Record With: Preset Setting DVR will apply the settings in the table below to a ll cameras according to the Preset Set tings. Preset Sett ing Option Camera Item Apply value Quality Superior Normal Fram e Rate Max recordi ng frame ra te of DVR Best Quali ty Event Fra me Rate 30 Quality Standard N ...

  • EverFocus ECOR264-16X1/1T - page 146

    138 A P P E N D I X C : R E M O T E C O N T R O L The IR remote control is an accessory to e nhance t he convenient operation of the DVR. You c an perform all the settings a nd operations from the remote control. The effective distance is up to 33 feet line of sight. The keypad functions are same as the front pane l buttons of the DVR. A p p e n d ...

  • EverFocus ECOR264-16X1/1T - page 147

    139 Headquarte r Office 12F, No.79 Sec.1 Shin-T ai W u Road, Hsi-Chi, Tai pei, Taiwan Tel: +886-2- 26982334 Fax: +886-2-2 6982380 Beijing office Room 609,T echnolog y Trade Build ing. Shangdi Inf ormation Indust ry Base, Haidian Distr ict,Beijing Ch ina Tel: +86-10- 62971096 Fax: +86-10-6 2971423 European O ffice Albert-Einste in-Strass e 1, D-4644 ...

Manufacturer EverFocus Category Voice Recorder

Documents that we receive from a manufacturer of a EverFocus ECOR264-16X1/1T can be divided into several groups. They are, among others:
- EverFocus technical drawings
- ECOR264-16X1/1T manuals
- EverFocus product data sheets
- information booklets
- or energy labels EverFocus ECOR264-16X1/1T
All of them are important, but the most important information from the point of view of use of the device are in the user manual EverFocus ECOR264-16X1/1T.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals EverFocus ECOR264-16X1/1T, service manual, brief instructions and user manuals EverFocus ECOR264-16X1/1T. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product EverFocus ECOR264-16X1/1T.

Similar manuals

A complete manual for the device EverFocus ECOR264-16X1/1T, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use EverFocus ECOR264-16X1/1T by users. Manuals are usually written by a technical writer, but in a language understandable to all users of EverFocus ECOR264-16X1/1T.

A complete EverFocus manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual EverFocus ECOR264-16X1/1T - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the EverFocus ECOR264-16X1/1T, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the EverFocus ECOR264-16X1/1T, that we can find in the current document
3. Tips how to use the basic functions of the device EverFocus ECOR264-16X1/1T - which should help us in our first steps of using EverFocus ECOR264-16X1/1T
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with EverFocus ECOR264-16X1/1T
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of EverFocus ECOR264-16X1/1T in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning EverFocus ECOR264-16X1/1T?

Use the form below

If you did not solve your problem by using a manual EverFocus ECOR264-16X1/1T, ask a question using the form below. If a user had a similar problem with EverFocus ECOR264-16X1/1T it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)