English dropdown-ico

Manual Kuhn Rikon 10-110B/E

20 pages 0.66 mb
Download

Go to site of 20

Summary
  • Kuhn Rikon 10-110B/E - page 1

    10” Cabinet Saw Sliding T able Model: 10-1 10B/E Owner ’ s Manual For more information: www .rikontools.com or info@rikontools.com For Parts or Questions: techsupport@rikontools.com or 877-884-5167 Record the serial number and date of purchase in your manual for future reference. Serial number: Date of purchase: Part #10-1 10B/EM2 ...

  • Kuhn Rikon 10-110B/E - page 2

    IMPORT ANT! Safety is the single most important consideration in the operation of this equipment. The following in- structions must be followed at all times. There are certain applications for which this tool was designed. We strongly recommend that this tool not be modi fi ed and/or used for any other application other than that for which it was ...

  • Kuhn Rikon 10-110B/E - page 3

    AL W A YS CHECK FOR DAMAGED P ARTS. Before initial or continual use of the tool, a guard or other part that is damaged should be checked to assure that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, and any other conditions that may affect its op ...

  • Kuhn Rikon 10-110B/E - page 4

    Safety W arnings........................................................................................................................................2 -3 T able Saw Safety Rules ..........................................................................................................................3 Speci fi cations ........................... ...

  • Kuhn Rikon 10-110B/E - page 5

    5 Model 10-1 10B/E 10” T able Saw Sliding T able is shipped complete in 2 boxes. Unpacking and Checking Contents Separate all “loose parts” from packaging materials and check each item with “T able of Loose Parts” to make sure all items are accounted for , before discarding any packaging material. Box #1 Content of Package A B C T ABLE OF ...

  • Kuhn Rikon 10-110B/E - page 6

    6 T ABLE OF LOOSE P ARTS Item Part Name Qty A Swing Arm Assembly 1 B Swing Arm Extension Bar 1 C Sliding T able Carriage 1 D Sliding T able Support Arm 1 E Loose Parts Bag 1 Box #2 A B C D E ...

  • Kuhn Rikon 10-110B/E - page 7

    7 Getting T o Know Y our Sliding T able 1. Flip Stop 2. Miter Fence 3. Sliding T able 4. Sliding T able Locking Pin 5. Push Block 6. Slide Handle 7. Swing Arm Assembly 8. Carriage T able Support Arm 9. Sliding T able Carriage 2 3 1 4 5 6 7 8 9 ...

  • Kuhn Rikon 10-110B/E - page 8

    8 Mounting the Swing Arm Bracket 1. Open the motor cover located at the left side of the saw . 2. With assistance hold the swing arm bracket against the saw body and attach using four 8MM hex bolts, four 8MM washers and four 8MM hex nuts. 3. Slide the four 8MM hex bolts through the bracket and saw body and attach using the four 8 washers and four 8 ...

  • Kuhn Rikon 10-110B/E - page 9

    9 Mounting the Sliding T able Continued 3. Slide the hardware toward the cast mounting bracket located on the saw body . Place the adjusting plate on top of the set screws as shown (A,Fig.5). 4. T ighten the lock knob slightly , leaving loose for adjustment. 5. Repeat procedure for rear mounting bracket. 6. Adjusting the parallel of the saw table a ...

  • Kuhn Rikon 10-110B/E - page 10

    Carriage T able Support Arm Installation 1. Insert the support arm into the swing arm extension bar as shown (A, Fig. 9) making sure that bearing assembly rests between the adjusting nuts and the swing arm extension bar (B, Fig. 9). Reminder: T ighten the carriage bolts shown in Figure 8 on page nine once the support arm is installed. 2. Hold the s ...

  • Kuhn Rikon 10-110B/E - page 11

    11 Installing the Sliding T able Miter Fence 1. Locate the miter fence (A, Fig. 13) and miter fence locking knob (B, Fig. 13) as shown. 2. Lay the miter fence on top of the sliding table carriage and place the rotation shaft into the hole on the sliding table carriage. Figure 14. 3. Install the miter fence locking knob from the underneath of the sl ...

  • Kuhn Rikon 10-110B/E - page 12

    12 Figure 17 Installing the Sliding T able Locking Pin 1. Locate the locking pin with the black handle and thread it through the sliding table body with wrench as shown. Figure 17. Assembly Leveling the Sliding T able to the Saw NOTE: The sliding table should be set approximately 3/64” of an inch higher than the saw table to prevent sheet goods f ...

  • Kuhn Rikon 10-110B/E - page 13

    13 Locking and Unlocking the Slide T able Keep the sliding table locked when not in use. Failure to do so could cause serious injury . T o lock the sliding table, pull the locking pin out- ward, twist and insert pin into the locking hole in the table carriage. (Fig. 22) T o unlock the sliding table, pull the locking pin out- ward, twist and rest th ...

  • Kuhn Rikon 10-110B/E - page 14

    Cutting Sheet Goods 1. Adjust the hold down plate according to the width of material to be cut. 2. Lay the workpiece onto the table and up against the saw fence. 3. Slide the workpiece through the saw blade until the material engages the hold down plate. W alk the workpiece through the cut with the sliding table until the workpiece clears the saw b ...

  • Kuhn Rikon 10-110B/E - page 15

    15 BEFORE CLEANING OR CARR YING OUT MAINTENANCE WORK, DISCONNECT THE MACHINE FROM THE POWER SOURCE (W ALL SOCKET). NEVER USE W A TER OR OTHER LIQUIDS TO CLEAN THE MACHINE. USE A BRUSH. REGULAR MAINTENANCE OF THE MACHINE WILL PREVENT UNNECESSAR Y PROBLEMS. Keep the table clean to ensure accurate cutting. Keep the table mounting area clean to ensure ...

  • Kuhn Rikon 10-110B/E - page 16

    16 FOR YOUR OWN SAFETY , AL W A YS TURN OFF AND UNPLUG THE MACHINE BEFORE CARR YING OUT ANY TROU- BLESHOOTING. For parts or technical questions contact: techsupport@rikontools.com or 877-884-5167. W ARNING! T roubleshooting ...

  • Kuhn Rikon 10-110B/E - page 17

    17 Parts Diagram ...

  • Kuhn Rikon 10-110B/E - page 18

    18 Parts List Key No . 1E 2E 3E 4E 5E 6E 7E 8E 9E 10E 11 E 12E 13E 14E 15E 16E 17E 18E 19E 20E 21E 22E 23E 24E 25E 26E 27E 28E 29E 30E 1F 2F 3F 4F 5F 6F 7F 8F 9F 10F 11 F 12F Part No. 1-JL82236009 1-JL82212006 1-M20GB6173 1-BRG51 104GB301 1-JL84070002 1-JL82236002 1-M4X8GB818Z 1-WSH5GB96Z 1-JL82236003 1-JL84070001 1-M8GB6170Z 1-WSH8GB96Z 1-M8X25GB5 ...

  • Kuhn Rikon 10-110B/E - page 19

    19 2-Y ear Limited W arranty RIKON Power T ools/Richen Enterprise, Inc. (“Seller”) warrants to only the original retail consumer/purchaser of our products that each product be free from defects in materials and workmanship for a period of two (2) years from the date the product was purchased at retail. This warranty may not be transferred. This ...

  • Kuhn Rikon 10-110B/E - page 20

    For more information: 1 10 Cummings Park Woburn, MA 01801 877-884-5167/781-933-8400 techsupport@rikontools.com www .rikontools.com Copyright Richen Enterprise, Inc. 2007 Printed in China 6/07 ...

Manufacturer Kuhn Rikon Category Saw

Documents that we receive from a manufacturer of a Kuhn Rikon 10-110B/E can be divided into several groups. They are, among others:
- Kuhn Rikon technical drawings
- 10-110B/E manuals
- Kuhn Rikon product data sheets
- information booklets
- or energy labels Kuhn Rikon 10-110B/E
All of them are important, but the most important information from the point of view of use of the device are in the user manual Kuhn Rikon 10-110B/E.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Kuhn Rikon 10-110B/E, service manual, brief instructions and user manuals Kuhn Rikon 10-110B/E. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Kuhn Rikon 10-110B/E.

Similar manuals

A complete manual for the device Kuhn Rikon 10-110B/E, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Kuhn Rikon 10-110B/E by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Kuhn Rikon 10-110B/E.

A complete Kuhn Rikon manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Kuhn Rikon 10-110B/E - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Kuhn Rikon 10-110B/E, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Kuhn Rikon 10-110B/E, that we can find in the current document
3. Tips how to use the basic functions of the device Kuhn Rikon 10-110B/E - which should help us in our first steps of using Kuhn Rikon 10-110B/E
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Kuhn Rikon 10-110B/E
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Kuhn Rikon 10-110B/E in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Kuhn Rikon 10-110B/E?

Use the form below

If you did not solve your problem by using a manual Kuhn Rikon 10-110B/E, ask a question using the form below. If a user had a similar problem with Kuhn Rikon 10-110B/E it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)