Manual Hitachi AP 720STM

22 pages 0.16 mb
Download

Go to site of 22

Summary
  • Hitachi AP 720STM - page 1

    AP 720S TM LCD Panel Guide OPTIGEN® Semi-Automated Instrument ...

  • Hitachi AP 720STM - page 2

    1 Confidentiality Notice The materials and information contained here in are being provided by Hitachi Chemical Diagnostics to its customer solely for custom er ’ s use for its internal business purposes. Hitachi Chemical Diagnostics retains all rights, title, interest in and copyrights to the materials and inform ation herein. The m ate rials an ...

  • Hitachi AP 720STM - page 3

    2 ― T able of Contents ― Page 1 Operation Key…………………………………………………………... 3 2 Screen Display and Operation Method 2-1 Initialization……………………………………………………… 4 2-2 Main Menu………………………………………………………. 5 2-3 Panel T ype Selection? ...

  • Hitachi AP 720STM - page 4

    3 1 Operation Key Display: Liquid Crystal Panel Operation Key: Only the touch panel key in the shaded f i eld is executable. Press the Operation Key to execute the function. See Figure 1. Numerical V alue Input Key: Numerical value can be registered b y ‘ENT’ key . If the value entered is out of the defined range, beep sounds will be on for 3 t ...

  • Hitachi AP 720STM - page 5

    4 2 Screen Display and Operation Method 2-1 Initializ ation [Screen Dis play] (Figure 3) (Figure 4) [Summary] Figure 3 will display approximately 5 sec onds after the power is turned on. Then the screen will change autom atically to the initialization sc reen, Figure 4. After the completion of initialization, there is a b eep sound and Main Menu sc ...

  • Hitachi AP 720STM - page 6

    5 2 Screen Display and Operation Method 2-2 Main Menu [Screen Dis play] (Figure 5) (Figure 6) [Summary] Figure 5 is the Main Menu screen after completion of Figure 4. Panel 36 is the default panel. Figure 6 is the Main Menu screen afte r selecting Panel 20 in Figure 7. [Operation Key] Panel 36: T o Figure 7 Panel T ype Selection screen Next: T o Fi ...

  • Hitachi AP 720STM - page 7

    6 2 Screen Display and Operation Method 2-3 Panel T ype Selection [Screen Dis play] (Figure 7) [Summary] Select 36-allergen or 20-a ller gen panel in Figure 7. [Operation Key] 36: T o Figure 5 Main Menu screen 20: T o Figure 6 Main Menu screen ...

  • Hitachi AP 720STM - page 8

    7 2 Screen Display and Operation Method 2-4 Auto-Run (Process 1 to Pr ocess 7) [Screen Dis play] (Figure 8) (Figure 9) (Figure 10) (Figure 1 1) (Figure 12) (Figure 13) (Figure 14) (Continued on next page) ...

  • Hitachi AP 720STM - page 9

    8 (Auto-Run, cont.) [Summary] Figure 8 is a confirmation screen. The Op erator needs to check that the W ash Buff er Bottle and Antibody Reservoir are filled, and that the W aste Bottle is emptied prior to the Auto-Run. Press “S ta rt” key . The following screens will be displayed in order and Auto-Run will be executed: o Figure 9 displays the ...

  • Hitachi AP 720STM - page 10

    9 2 Screen Display and Operation Method 2-5 Auto-Run (Photoreagent Setup and Pr ocess 8) [Screen Dis play] (Figure 15) (Figure 16) (Figure 17) [Summary] Figure 15 will alarm Operator tha t Photoreagent is needed. The display shows the elapsed time from the start of auto-pause. “Alarm Off” key will stop the alarm . “Continue” key will shift ...

  • Hitachi AP 720STM - page 11

    10 2 Screen Display and Operation Method 2-6 Auto-Run (Pr ocess End) [Screen Dis play] (Figure 18) [Summary] Figure 18 will alarm the Operator of the completion of Auto-Run. The display shows the elapsed time from the completi on of Auto-Run. “Alarm Of f” key will stop the alarm. “End” key will return to the Ma in Menu screen, Figure 5. “ ...

  • Hitachi AP 720STM - page 12

    11 2 Screen Display and Operation Method 2-7 Maintenance [Screen Dis play] (Figure 19) (Figure 20) (Figure 21) (Figure 22) (Figure 23) (Figure 24) (Figure 25) (Figure 26) (Continued on next page) ...

  • Hitachi AP 720STM - page 13

    12 (Maintenance, cont.) [Summary] Figure 19 provides the Prime, Rinse and Clock functions. [Operation Key] (Figure 19) Prime: T o Figure 20 Prime Operation screen Rinse: T o Figure 22 Ri nse Operation screen Clock: T o Figure 26 T ime Setup screen Back: T o Figure 5 Main Menu screen (Figure 20) Prior to Prime Operation, the Operator ne eds to set t ...

  • Hitachi AP 720STM - page 14

    13 2 Screen Display and Operation Method 2-8 Pause [Screen Dis play] (Figure 27) (Figure 28) (Figure 29) (Figure 30) (Figure 31) (Figure 32) (Figure 33) (Figure 34) (Continued on next page) ...

  • Hitachi AP 720STM - page 15

    14 (Pause, cont.) [Summary] Figure 27 to Figure 33 the ala rm will indicate that th e current operation is pause d. The screen will display the [Run S tatus] in cluding the time elapsed from the start of the pause. A message “Inform ation=” ma y be displayed in the screen, Figure 33. See [Supplement] below for details. “Continue” key will s ...

  • Hitachi AP 720STM - page 16

    15 (Examples of alarm messages, cont.) o Example) “Information =C2 L” “C2 L” indicates failure from the head pa rt of top/bottom carrier drive or sensor failure. After you confirm the status, press “CONTINUE” key and check the status. o Example) “Information =C2 H” “C2 H” indicates failure from the head part of top/botto m carri ...

  • Hitachi AP 720STM - page 17

    16 2 Screen Display and Operation Method 2-9 S tart/End Pr ocess and Position Setup [Screen Dis play] (Figure 35) [Summary] Figure 35 will appear when power interruption occurs during Auto-Run or the current process is cancelled/paused during Auto-Run. Before re-starting the Auto-Run, the Operator needs to setup the ST AR T PROCESS NO., END PROCESS ...

  • Hitachi AP 720STM - page 18

    17 2 Screen Display and Operation Method 2-10 Alarm [Summary] The alarm screen will appear when a problem occurs during the Auto-Run. The alarm will sound and can be stopped by pressing the “Alarm Of f” key . There are two kinds of alarm screens. The first ala rm screen is for con firmation. The Operator will confirm the f ailure or error displ ...

  • Hitachi AP 720STM - page 19

    18 Figur e 37 - Alarm Screen of Data Initializ ation (Confirmation) [Screen Dis play] (Figure 37) [Summary] Figure 37 shows data error has occurred af ter initialization. The Operator needs to press “Ok” so that the data for the instrument will be recovered and the def ault values will be implemented. Re-entry of program and internal param eter ...

  • Hitachi AP 720STM - page 20

    19 Figur e 39 - Alarm Screen of No Pettes [Screen Dis play] ( F i g u r e 3 9 ) [Summary] If the control software detect s that there is no pette at th e start of the run, Figure 39 will appear . If the run needs to be conti nued, s etup pettes in the Pette Rack, and press ‘Retry’ key to continue. If the run needs to be cancelled, press ‘End? ...

  • Hitachi AP 720STM - page 21

    20 Figur e 41 - Alarm Screen of W r ong S tart Pette Setup [Screen Dis play] (Figure 41) [Summary] If the control software detects that the position of the start pette is wrong at the start of the run, Figure 41 will appear . If the run needs to be continued, setup the pettes correctly , press ‘Retry’ key to con tinue. If the run needs to be ca ...

  • Hitachi AP 720STM - page 22

    Auto-Run Pause Maintenance AP720S™ Panel Flowchart Interrupted run 21 ...

Manufacturer Hitachi Category Cable Box

Documents that we receive from a manufacturer of a Hitachi AP 720STM can be divided into several groups. They are, among others:
- Hitachi technical drawings
- AP 720STM manuals
- Hitachi product data sheets
- information booklets
- or energy labels Hitachi AP 720STM
All of them are important, but the most important information from the point of view of use of the device are in the user manual Hitachi AP 720STM.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Hitachi AP 720STM, service manual, brief instructions and user manuals Hitachi AP 720STM. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Hitachi AP 720STM.

Similar manuals

A complete manual for the device Hitachi AP 720STM, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Hitachi AP 720STM by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Hitachi AP 720STM.

A complete Hitachi manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Hitachi AP 720STM - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Hitachi AP 720STM, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Hitachi AP 720STM, that we can find in the current document
3. Tips how to use the basic functions of the device Hitachi AP 720STM - which should help us in our first steps of using Hitachi AP 720STM
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Hitachi AP 720STM
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Hitachi AP 720STM in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Hitachi AP 720STM?

Use the form below

If you did not solve your problem by using a manual Hitachi AP 720STM, ask a question using the form below. If a user had a similar problem with Hitachi AP 720STM it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)