Manual Canon ELAN7NE-30V Date, ELAN7N-33V

100 pages 2.52 mb
Download

Go to site of 100

Summary
  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 1

    English E INSTRUCTIONS ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 2

    ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 3

    3 Thank y ou for pur c hasing a Canon product. The EOS ELAN 7NE (D A TE) / ELAN 7N / 30V (D A TE) / 33V is a high- performance, AF single-lens refle x camera with Ey e Control ∗ and se ven AF points. It is suited for a wide v ariety of subjects and situations with fully automatic and user-controlled shooting modes. Read this instruction booklet t ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 4

    4 Contents Introduction Handling Cautions .............................6 Quick Start Guide ..............................8 Nomenclature ..................................10 Conv entions Used in this Instructions ...16 1 Before Y ou Start .........................17 Installing the Batteries .....................18 Checking the Battery Lev el ....... ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 5

    5 F ocusing Off-Center Subjects..........50 When Autof ocus F ails (Manual F ocusing) ..........................51 8 Manual F ocusing ...................51 Z Metering Modes ..........................52 4 User-Contr olled Shooting .........53 S Program AE .................................54 R Shutter-Priority AE ....................56 E Aper ture-Pr ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 6

    6 Handling Cautions Camera Care and Storage • The camera is a precision instrument. Do not drop it or subject it to physical shoc k. • The camera is not waterproof and should not be used in wet conditions or underwater . If the camera gets w et, take it to y our nearest Canon dealer as soon as possible . If small amounts of water splash onto th ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 7

    LCD Displays LCD displays oper ate more slowly at low temper atures, and ma y appear dark at high temperatures. The display will return to normal at room temperature. Batteries • Before installing the batteries, wipe the battery contacts to remov e any fingerpr ints and smudges. This is to prevent f aulty connections and corrosion. •N ev er dis ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 8

    8 Quick Start Guide 1 Install the batteries. Refer to the battery orientation diagram on the battery chamber cover , and inser t two CR123A lithium batteries as shown. (p.18) 2 Attach a lens. Align the red dots on the lens and camera and turn the lens as shown b y the arrow until it snaps in place. (p .20) 5 Load the film. Align the edge of the fil ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 9

    9 3 On the lens, set the f ocus mode s witch to <AF>. (p .20) 4 T urn the Mode Dial to < Y > (Full A uto). K eep pressing the Mode Dial’ s lock button while turning the dial. (p.28) 7 T ake the picture . Press the shutter button completely to take the picture. (p .21) 8 Unload the film. At the end of the roll, the film rewinds automat ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 10

    10 Nomenclature • Reference page n umbers are in parentheses. • The camera controls are indicated as icons in brac kets < >. Built-in flash / AF-assist beam (p.78/29) Red-ey e reduction lamp / Self-timer / Remote control lamp (p.32/33/76) AF mode dial (p.15, 38) Remote control sensor (p.76) Hot shoe (p.81) **Eye Control s witch (p.15, 43, ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 11

    11 < u > Quick Control Dial (p .16) Tr ipod sock et < 0 > Function button ( p.23, 32, 68, 72, 73, 74, 80 ) Eyecup (p .25, 34) Battery compar tment cov er release lev er ( p .18) Viewfinder e yepiece < 6 > Midroll rewind button ( p .24) Film check window < 3 > AF point selection button ( p.41, 87) *Date display panel (p .35) ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 12

    12 Nomenclature LCD P anel < 8 > Manual f ocus AF point mark < 5 > Film mark Exposure lev el indicator Exposure compensation amount AEB lev el Flash exposure compensation amount Red-ey e reduction lamp-on indicator Film transport indicator Battery level mark Fr ame counter ( E - A ) Multiple-exposure setting ( E - I ) Self-timer operati ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 13

    13 Viewfinder Inf ormation AF points (Superimposed display for 7 AF points) < j > AE lock / ***FE lock AEB in progress < M > Flash-ready ***Improper FE lock war ning Shutter speed ( D ∼ K , y ) ***FE lock ( o ) Focusing screen < N > ***High-speed sync (FP flash) Aper ture value ( Q - V ) Exposure lev el indicator Exposure compen ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 14

    14 Nomenclature Custom Function Set 2 OFF Full Auto Mode Dial lock release button B a s i c Z o n e I m a g e Z o n e C r e a t i v e Z o n e Mode Dial • The dial has modes in two zones . • The dial is lock ed when it is set to < 2 >. T o release the lock, hold down the Mode Dial loc k release button and turn the dial. 1 Basic Zone Fully ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 15

    15 AF Mode Dial ONE SHO T AF (p .39) AI FOCUS AF (p .40) AI SER V O AF (p .39) Eye Control OFF (p .49) Eye Control ON (p .48) Calibration (p .43) Self-timer / Remote control mode (p .33, 76) Continuous (p .73) Single-frame (p .73) Eye Contr ol Switch ( m Model only) Film Adv ance Mode Lever ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 16

    16 Con ventions Used in this Instructions • The < l > icon indicates the Main Dial. • All the operations described in this booklet assume that the Mode Dial is not set to < 2 >. Before proceeding with any operation, turn the Mode Dial to a picture-taking mode by pressing the loc k button and turning the dial. • The < u > ico ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 17

    1 Bef ore Y ou Star t Attaching the Strap P ass the end of the strap through the camera’ s strap mount from the bottom. Then pass it through the strap’ s buckle as sho wn in the illustration. Pull the strap to make sure it does not slip out of the buc kle. • The ey epiece cov er is also attached to the strap . (p.34) 17 This chapter explains ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 18

    18 Installing the Batteries The camera uses two lithium CR123A (or DL123A) batteries. 1 Open the battery compar tment cover . • Slide the release lev er as shown by the arrow and open the cov er. 2 Install the batteries. • Make sure the battery contacts ( + and – ) are properly oriented as shown. • Do not mix old and new batteries. 3 Close ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 19

    19 Checking the Battery Le vel Check the battery lev el after replacing the batteries and before using the camera. • The battery life shown abov e is based on Canon’s testing conditions with new batteries. • Figures in parentheses apply when the Eye Control s witch is < 1 >. Battery Life (With 24-ex. rolls) T urn the Mode Dial to a shoo ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 20

    20 Mounting and Detaching a Lens 1 Remove the caps. • Remov e the rear lens cap and the camera body cap . 2 Mount the lens. • Align the red dots on the lens and camera and turn the lens as shown by the arrow until it snaps in place. 3 On the lens, set the focus mode s witch to <AF>. • If the focus mode s witch is set to < MF >, au ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 21

    21 How the Shutter Button W orks If an Extender (sold separately) is used and the maximum aperture (the lowest f/number) of the lens becomes smaller than f/5.6, autof ocusing will not operate. The shutter button has two stages . Y ou can press it do wn halfwa y or fully . The two le vels of shutter b utton operation are as f ollows: When it is pres ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 22

    22 5 Loading and Unloading Film Loading Film When you load the film, it adv ances automatically to the first frame . With DX-coded film, the camera automatically sets the film’ s ISO speed. 2 Open the back co ver . • Slide down the bac k cov er release lev er and open the back. 1 T urn the Mode Dial to any setting e xcept < 2 >. • Hold ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 23

    23 If the film is not loaded properly , the < 5 > icon will blink on the LCD panel and the shutter will not work. Reload the film properly . • The shutter cur tains hav e been manuf actured with very high precision. Ne ver touch them with your fingers. When loading film, do not touch or damage the cur tains with your fingers or film. • In ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 24

    24 5 Loading and Unloading Film s During film rewind, the LCD panel will indicate the film rewinding and the frame count will count down. s The film rewind stops automatically . • Check that the < 5 > icon is b linking, then open the camera back and tak e out the film. After the film’ s last frame is exposed, the camera re winds the film ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 25

    25 Dioptric Adjustment If the dioptric adjustment knob still cannot make the viewfinder look clear , use a Dioptric Adjustment Lens Ed (10 types sold separately). By adjusting the diopter , eyeglass wearers will not need their e yeglasses to see a sharp viewfinder image. The camera’ s adjustable dioptric range is –2.5 to +0.5 dpt. 1 Remove the ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 26

    26 Holding the Camera • Firmly grasp the camera grip with your right hand, and press your both elbows lightly against y our body . • Hold the lens at the bottom with your left hand. • Press the camera against your f ace and look through the viewfinder . •T o maintain a stable stance , place one foot in front of the other instead of lining u ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 27

    2 Full y A utomatic Shooting T urn the Mode Dial to < Y >, < U >, < I >, < O >, < P >, or < A >. • The picture-taking procedure is the same as with the “< Y > Full A uto mode” on page 28. • The settings automatically set by the Basic Zone modes are shown in the “F eature A vailability Ta b le” o ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 28

    28 Y Full A uto Mode All you do is point the camera and press the shutter b utton. Everything is automatic so it is easy to photograph an y subject. With seven AF points to focus the subject, y ou just point and shoot. 1 T urn the Mode Dial to < Y >. 2 Aim any of the AF points on the subject. • The main subject, as determined by the camera, ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 29

    29 Under low-light conditions, the b uilt-in flash fires a br ief burst of flashes when you press the shutter b utton halfwa y . This is to illuminate the subject to enable easier autof ocusing. • The AF-assist beam does not function in the < I > < P > modes. • The built-in flash’ s AF-assist beam is effective up to about 4 meters ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 30

    30 Programmed Ima ge Control Modes This mode blurs the bac kground to mak e the human subject stand out. • Holding down the shutter b utton ex ecutes continuous shooting. • F or better bac kground b lur , use a telephoto lens and fill the frame with the subject or hav e the subject stand closer to the camera. s This automatically sets the AF mo ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 31

    31 •A blinking shutter speed indicates that the shutter speed is too slow to prev ent a blurred picture caused b y camera shak e. Hold the camera steady and press the shutter button smoothly , or use a tripod. (The shutter speed indicator still blinks when y ou use a tripod, but camera shake will not be a problem.) • In the < A > mode, us ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 32

    32 F Using Red-ey e Reduction (with the built-in flash) When flash is used in a low-light en vironment, the subject’ s eyes ma y come out red in the photograph. “Red eye” happens when the light from the flash reflects off the retina of the ey es. The camera’s red-e ye reduction f eature turns on the red-ey e reduction lamp to shine a gentle ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 33

    33 Do not stand in front of the camera when you press the shutter b utton to start the self-timer . Doing so prevents the camera from f ocusing the subject. •T o cancel the self-timer after it star ts, set the film advance mode le v er to < J > (single-frame shooting) or < H >. • When using the self-timer to take a picture of only y ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 34

    34 Using the Eyepiece Co ver Attach the ey epiece cover . • The ey epiece cov er is attached to the strap . • Slide the ey epiece cov er down into the ey epiece groov e to attach it. When using the self-timer or optional wireless remote control, you should use the ey epiece cov er (p .17) to prev ent stray light from entering the ey epiece and ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 35

    Month, day, year (Dec. 24, 2004) Day, month, year (24 Dec. 2004) Year, month, day (2004 Dec. 24) Day, hour, minute (24th 16:45) Hyphens (Blank) •< W > is displayed abo v e the month. • When a picture is taken, the bar < 9 > will b link to indicate that the date or time has been imprinted. 35 Imprinting the Date or Time (D A TE Model ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 36

    36 Imprinting the Date or Time (DA TE Model only) Setting the Date and Time Replacing the Date Battery 1 Select the date or time display . • Press the < q > button. 1 Remove the battery chamber co ver . • Open the camera back and loosen the screw as sho wn in the illustration. 2 T ake out the battery . 3 Insert a new battery . • The bat ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 37

    3 AF Modes and Metering Modes • The ★ symbol indicates that the respective feature can be used only in Creative Zone modes ( S , R , E , W , Q ). 37 The viewfinder has se ven AF points. Y ou can select the AF point closest to the subject to make it easier and faster to compose the picture. Y ou can also select the AF mode to suit the subject or ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 38

    38 Selecting the AF Mode ★ The AF mode is the autofocusing method. The camera has three AF modes: 1. One Shot AF for still subjects , 2. AI Ser vo AF f or moving subjects, and 3. AI Focus AF that s witches automatically from One-Shot AF to AI Ser v o AF if the subject star ts to mov e. 1 Set the lens focus mode s witch to <AF>. 2 Set the Mo ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 39

    39 While you press the shutter b utton halfwa y , the camera f ocuses contin uously • This AF mode suits moving subjects when the focusing distance k eeps changing. s With predictive AF ∗ , the camer a can also focus tr ack a subject which steadily approaches or retreats from the camera. s The exposure settings are set immediately before the pi ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 40

    40 Selecting the AF Mode ★ • When focus is achie ved, the focus confirmation light < n > in the viewfinder will not light and the beeper will not sound. • If the focus confirmation light < n > in the viewfinder b links, it means f ocus has not been achiev ed. •F ocus loc k cannot be used. With C.Fn-04-2, holding do wn the < w ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 41

    41 If you use an e xternal, EOS-dedicated Speedlite and focus cannot be achiev ed with the AF-assist beam, select the center AF point. 3 Selecting an AF P oint ★ The AF point is used for f ocusing. The AF point can be selected automatically by the camera or man ually by y ou. In the Basic Zone modes and < Q > mode, the AF point selection is ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 42

    42 3 Selecting an AF P oint ★ Display the desired AF point in red. • See the diagram on the left on ho w the AF point selection changes with the < 3 > button. • When you press the < 3 > b utton to s witch from automatic AF point selection to manual AF point selection, the selection will star t with the center AF point. Display all ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 43

    43 With Eye Control, the camera detects which AF point y our ey e is looking at. That AF point is then selected and used to focus the subject. e Eye Contr ol Calibration ( m Model only) 1 Set the Eye Contr ol switch to < e >. s “ u ” and the CAL No . are display ed on the LCD panel. Blinking number: Indicates unregistered calibration. Non ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 44

    44 e Eye Contr ol Calibration ( m Model only) Let go of the shutter button. 4 5 Repeat steps 4 and 5 . s The AF point will blink in the f ollowing sequence: 2 → 3 → 4 . 6 Check the vie wfinder display . s When the calibration is completed, the CAL No . will stop blinking and “ i ” will be display ed. 7 Hold the camera vertically and look at ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 45

    45 9 While looking at the blinking AF point, press the shutter button. • F ollo w steps 4 to 6 . s The AF point will blink in the f ollowing sequence: 5 → 6 → 7 → 8 . 10 Check the vie wfinder display . s When the calibration is completed, the CAL No . will stop blinking and “ i ” will be display ed. 11 Set the Eye Contr ol switch to < ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 46

    46 e Eye Contr ol Calibration ( m Model only) Eye Contr ol Calibration and Operation Tips • Hold the camera as you alw a ys do while looking through the viewfinder . • Look through the viewfinder so y ou can see all four corners of the viewfinder . •A v oid squinting or blinking your e ye . • When using Eye Control, look through the e yepie ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 47

    47 Deleting Eye Contr ol Calibration Settings If you w ant to sav e new calibr ation settings under a CAL No . that already has calibration settings, f ollow the procedure below to first delete the previous calibr ation settings. Y ou can then do the calibration procedure and sav e the new calibr ation settings under that CAL No . 1 Set the Eye Con ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 48

    48 g Using Eye Contr ol ( m Model only) With Eye Control, y ou just look at the AF point where you w ant to focus . •E ye Control can be used in all shooting modes except < Y > (Full Aut o ). • In the < Y > (Full Auto) mode , Eye Control inf or mation is also added to the automatic AF point selection program f or more precise automa ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 49

    49 6 K eep looking at the f ocusing point you want to select and press the shutter button halfwa y . s The < m > icon lights in the viewfinder . s The AF point you look at will flash in red and focus the subject. 7 T ake the picture. • If the camera f ails to detect which AF point you are looking at, the < m > icon in the viewfinder w ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 50

    50 Focusing Off-Center Subjects After achieving f ocus, you can loc k the focus on a subject and recompose the shot. This is called “focus lock. ” F ocus loc k wor ks when the AF mode is set to One Shot AF . 1 Set the camera to a Creative Zone mode. 2 Select the desired AF point. 3 Focus the subject. • Aim the AF point on the subject, then pr ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 51

    51 When A utof ocus Fails (Man ual Focusing) A utof ocus can fail to achie ve f ocus (the focus confirmation light < n > b links) with certain subjects such as the following: Difficult Subjects for A utofocusing •L o w-contrast subjects. Example: Blue sky , flat surface with a solid color . • Subjects in very low light. • Extremely back ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 52

    52 Z Metering Modes ★ The camera has three metering modes: Evaluative , par tial, and center- w eighted av eraging metering. The Basic Zone uses e valuative metering. In the Creative Zone, an y of the three modes can be selected. Pa r tial meter ing and FE lock can be link ed to the active AF point. (See page 87 for C .Fn-08-1.) 1 Press the < ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 53

    4 User -Controlled Shooting 53 With Creative Zone modes , you can set the desired shutter speed or aper ture value to obtain the e xposure y ou want. Y ou take control of the camera. C r e a t i v e Z o n e • The ★ symbol indicates that the respective feature can be used only in Creative Zone modes ( S , R , E , W , Q ). • Press the shutter b ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 54

    54 S Program AE Like the < Y > (Full A uto) mode, this is a general-purpose mode to make picture-taking easy . It sets the shutter speed and aper ture value automatically to suit the subject’ s brightness. ∗ < S > stands for Prog ram. ∗ “ AE ” stands for auto e xposure. 1 T urn the Mode Dial to < S >. 2 Focus the subject ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 55

    55 4 T ake the picture. • Compose the shot and press the shutter button fully . • If the “ K ” shutter speed and maxim um aper ture display b link, it means the subject is too dark. Use flash. • If the “ D ” shutter speed and minim um aper ture display b link, it means the subject is too bright. Attach an ND filter (sold separately) t ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 56

    56 R Shutter-Priority AE In this mode, y ou set the shutter speed and the camera sets the aper ture v alue automatically to suit the subject brightness. A f ast shutter speed can freeze the motion of a f ast-moving subject and a slo w shutter speed can blur the subject to giv e the impression of motion. ∗ < R > stands for Time value which i ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 57

    57 • If the maximum aperture value blinks, it indicates underexposure . T urn the < l > dial to set a slower shutter speed until the blinking stops. • If the minimum aperture value blinks, it indicates ov ere xposure. T urn the < l > dial to set a faster shutter speed until the blinking stops. Shutter Speed Display The shutter speed ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 58

    58 E Aperture-Priority AE In this mode, y ou set the desired aper ture value and the camera sets the shutter speed automatically to suit the subject brightness. The larger or brighter the aper ture (lower f/number) the more b lurred the background will become . This effect is ideal f or por traits. The smaller or darker the aper ture (higher f/numb ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 59

    59 • If the slowest shutter speed b links, it indicates underexposure . In such a case, turn the < l > dial to set a larger aper ture value (smaller f/n umber) until the shutter speed display stops b linking. • If the fastest shutter speed b links, it indicates ov ere xposure. In such a case, tur n the < l > dial to set a smaller ap ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 60

    60 W Manual Exposure In this mode, y ou set both the shutter speed and aper ture as desired. T o determine the exposure, ref er to the e xposure le vel indicator in the viewfinder or use a handheld e xposure meter . This method is called manual e xposure. In the < W > mode, the center-weighted a ver aging metering will be set automatically . ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 61

    61 5 Determine the exposure. • Look at the exposure le vel indicator and set the shutter speed and aper ture value as desired. 6 T ake the picture. If the exposure le vel mark < z > blinks at the < o > or < s > lev el, it indicates that the difference betw een the standard exposure e xceeds +/–2 stops. Exposure lev el mar k St ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 62

    62 Q Depth-of-field AE Depth-of-field AE with a Manually-Selected AF P oint The depth-of-field AE mode is for obtaining wide depth of field betw een a near and far subject. It is eff ective f or group shots and landscapes. The optimum point of f ocus, aperture, and shutter speed are set automatically to obtain the desired depth of field. For DEP , ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 63

    63 4 Focus the nearest subject. • Aim the selected AF point on the nearest subject, then press the shutter button. ( 0 ) s The focus confirmation light < n > will light, and “ s ” will be displa yed. • In steps 4 and 5 , pressing the shutter button completely will not tak e the picture. 5 Focus farthest subject. • Repeat step 4 . s ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 64

    64 Q Depth-of-field AE Depth-of-field AE with Eye Contr ol ( m Model only) With Eye Control, y ou can easily set the desired depth of field without having to recompose so much. 1 T urn the Mode Dial to < Q >. 2 Set the Eye Contr ol switch to < g >. • Make sure the correct CAL No . has been set. (p.48) 3 Focus the nearest subject you w ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 65

    • If the aper ture display b links, it means that the desired depth of field cannot be obtained. Mov e further away from the subject or use the wide-angle end if you are using a zoom lens. Then try it again. • If the “ K ” shutter speed and maxim um aper ture display b link, it means the subject is too dark. The < Q > mode cannot be u ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 66

    66 Q Depth-of-field AE • If you are using a zoom lens , do not zoom bef ore the picture is taken. • If a slow shutter speed is set, use a tripod to prev ent camera shake. • The < Q > mode cannot be used if the lens focus mode s witch is set < MF >. The result will be the same as using the < S > mode. • The < Q > mode ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 67

    67 Exposure Compensation ★ Exposure compensation is used to alter the camera’ s standard exposure setting. Y ou can make the picture look lighter (increased exposure) or darker (decreased e xposure). The exposure compensation amount can be set up to +/–2 stops in half-stop increments. 1 T urn the Mode Dial to a Creative Zone mode except < ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 68

    68 L A uto Exposure Brac keting (AEB) ★ With AEB, the camera automatically changes the e xposure within a set r ange (up to +/-2 stops in 1/2-stop increments) f or three successive frames. 1 Move the < 7 > arr ow to the < L > icon. • Look at the LCD panel and press the < 0 > button. ( 1 ) 2 Set the desired AEB amount. • Tu r ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 69

    • During AEB shooting, the < 7 > arrow will appear ne xt to the < L > icon and the AEB lev el < x > will be display ed. In the viewfinder , the < j > icon will blink. • In the < H > film advance mode , the camera stops shooting automatically after taking the three AEB shots. In the < J > (single frame) mode, ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 70

    70 j AE Lock ★ AE lock enab les you to loc k the e xposure at a different spot from the point of focus . After locking the e xposure, y ou can recompose the shot while maintaining the desired exposure le vel. This feature is useful f or backlit and spotlighted subjects . 1 Focus the subject. • Press the shutter button halfw ay to f ocus . s The ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 71

    71 Bulb Exposures ★ When bulb is set, the shutter is open while y ou keep pressing the shutter b utton fully . Bulb exposures are useful when long e xposures are required f or night scenes , firew orks, astronomical photograph y , etc. 1 T urn the Mode Dial to < W >. 2 Set the shutter speed to “ y ”. • Look at the LCD panel and turn t ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 72

    72 4 Multiple Exposures ★ The film is not advanced after each shot, so y ou can e xpose multiple shots on the same frame. Shoot up to nine shots on a single frame . 1 Move the < 7 > arr ow to the < 4 > icon. • Look at the LCD panel and press the < 0 > button. ( 1 ) s “ E ” will be display ed. 2 Set the desired number of m ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 73

    73 H Selecting the Film Adv ance Mode ★ The film advance mode can be set to Single < J > or Contin uous < H >. If the film is not DX-coded or if you w ant to set a different film speed, load the film in the camera and set the film speed manually as f ollows . The settable film speed range is ISO 6 to 6400. D Setting the ISO Film Speed ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 74

    74 9 Silencing the Beeper The beeper can be silenced in all of the picture-taking modes. 1 Move the < 7 > arr ow to the < 9 > icon. • Look at the LCD panel and press the < 0 > button. ( 1 ) 2 Set the setting to “ W ”. • Tu rn the < l > dial. • To enable the beeper to sound, set to “ E ”. • Press the shutter b ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 75

    75 Mirror Loc kup ★ Mirror lockup is enab led with C.Fn-05-1. This prev ents mirror-caused vibrations which ma y blur the image during close-ups or when a telephoto lens is used. T o set this Custom Function, see “Setting a Custom Function” on page 84. When mirror lockup is set, the camera operates as f ollows . 1 Press the shutter button ful ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 76

    76 K Wireless Remote Control Using the Remote Switch With Remote Controller RC-1 (sold separately), wireless operation is possible up to 5 m/16.4 ft a wa y from the front of the camera. 1 T urn the film advance mode lever to < p >. s The < K > icon appears on the LCD panel. Connect the Remote Switch RS- 60E3’ s (sold separately) plug ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 77

    5 Flash Photograph y 77 With the built-in flash or EOS- dedicated Speedlite, y ou can easily take flash pictures in the same wa y as normal AE shooting. In the Basic Zone modes (except < I > < P >), the built-in flash is fully automatic. In Creative Zone modes, it can be used at any time . ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 78

    78 Using the Built-in Flash In low-light or bac klit conditions, the b uilt-in flash will pop up and fire automatically (e xcept in < I > < P > modes). In a Basic Zone Mode In a Creative Zone Mode S : Use this mode for automatic flash photograph y . The flash sync speed (within 1/60 sec. - 1/125 sec) and aper ture value will be set auto ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 79

    79 • Use the built-in flash at least 1 meter (3.3 ft) a wa y from the subject. Closer distances may result in the flash partially obstructed by the lens barrel. • When using the built-in flash, detach any hood attached to the lens . A lens hood will par tially obstruct the flash cover age. • When a super telephoto lens or a fast, large-apertu ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 80

    80 Using the Built-in Flash a Flash Exposure Compensation ★ Flash exposure compensation can be set in the same w a y as with e xposure compensation. It can be set up to +/–2 stops in 1/2-stop increments. 1 Move the < 7 > arr ow to the < a > icon on the LCD panel. • Press the < 0 > button to mo ve the arrow . ( 1 ) 2 Set the ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 81

    81 Using an EOS-dedicated Speedlite The camera is compatible with the EX/EZ/E/EG/ML/TL-series EOS- dedicated Speedlites. For details on operating the Speedlite, ref er to the Speedlite’ s instruction booklet. Using an EX-series Speedlite With E-TTL II autoflash (AF point-linked, ev aluative flash metering with preflash), y ou can easily tak e nat ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 82

    82 •C .Fn-07-3 can disable the EOS-dedicated Speedlite from firing a flash. (p.86) •C .Fn-06-1 can set second-cur tain flash synchronization for an EOS- dedicated Speedlite. (p.86) • With C.Fn-09-1, the flash sync speed will be fix ed at 1/125 sec. in the < E > mode. (p .87) Using an EOS-dedicated Speedlite ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 83

    6 Custom Functions (C.Fn) 83 Custom Functions enable y ou to customize v arious camera features to suit your picture-taking preferences . In the previous te xt, the < V > symbol was used to point out relev ant Custom Functions. In this chapter , all the Custom Functions are described in detail. • Custom Function settings are applied in the ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 84

    84 G Setting a Custom Function 1 Tu rn the Mode Dial to < G > . s The < V > icon and Custom Function No . are display ed on the LCD panel. 2 Select the Custom Function No. • Tu rn the < l > dial to select the Custom Function No . 3 Set the Custom Function setting. • Press the < w > button. The Custom Function setting cha ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 85

    85 Custom Function Settings C.Fn-01 Film rewind speed Increase the film rewind speed. 0: Normal (silent) rewind 1: High-speed rewind C.Fn-02 Film leader position after film rewind Prev ent the film leader from being rewound in the film car tridge after film rewind. 0: Rewinds film leader into the cartridge 1: Leaves film leader outside the cartridg ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 86

    86 Custom Function Settings C.Fn-05 Mirror loc kup 0: Disabled (Normal operation) 1: Enabled Effectiv e for close-up and telephoto shots to pre vent camera shak e caused by the mirror’ s reflex action. See page 75 to use this f eature . C.Fn-06 Shutter curtain sync with built-in flash/EOS-dedicated Speedlite 0: 1st-curtain sync 1: 2nd-curtain syn ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 87

    87 C.Fn-08 Partial metering linkage with AF point/FE lock Pa r tial metering and FE lock can be link ed to the selected AF point. Effectiv e for composing the shot. 0: Disabled (P artial metering/FE lock linked to center AF point) 1: Enabled C.Fn-09 Flash sync speed in A v mode 0: A uto 1: 1/125 sec. (fixed) When you use flash in the aperture-pr io ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 88

    88 C.Fn-12 Switch to center AF point with the < 3 > button 0: Disabled 1: Enabled Press the < 3 > button to immediately s witch to the center AF point. Convenient if y ou often use the center AF point. C.Fn-13 Lens AF stop button function 0: AF stop 1: AF start AF operates only while the AF stop button is pressed. While you press the bu ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 89

    89 Reference Basic Photography T erms AE Abbre viation for auto e xposure. It is an automatic meter ing and e xposure system that sets the optimum e xposure (shutter speed and/or aper ture v alue) based on the reading b y the built-in e xposure meter. Exposure Exposure occurs when the film is exposed to light. Correct e xposure is obtained when the ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 90

    Basic Photography T erms 90 Depth of field This is the range where acceptable f ocus can be achiev ed in front of and behind the point of focus . The smaller the aper ture value (the higher the f/number), the deeper the depth of field. And the larger the aper ture v alue (the lo wer the f/number), the shallo wer the depth of field. The depth of fie ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 91

    91 Feature A vailability T able Mode Dial mode AF Eye Control ∗ Auto Manual Metering Mode Film Advance Built-in Flash Functions AE Lock Custom Functions Exposure Compensation Midroll Rewind One-Shot AF-Assist beam Center-weighted avg. Flash off AF P oint Selection Evaluativ e Par tial Single Continuous Self-timer Auto Firing Manual Firing ISO Spe ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 92

    Film Advance Mode One-Shot AF AI Servo AF J (Single frame) H (Continuous) AI Focus AF 92 AE Lock Eff ects AF Mode and Film Adv ance Mode Combination ∗ If you use Eye Control AF and press the < j > b utton bef ore you press the shutter button halfwa y , AE lock will be applied to the center AF point. AF P oint Selection Method Metering Mode ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 93

    93 Program Line The program line belo w applies when the camera is used in the < S > Program AE mode with an EF 28-105mm f/3.5-4.5 lens . Aperture value Shutter speed : At 28mm focal length : At 105mm focal length 12 25 50 ISO 6 100 200 400 800 1600 3200 6400 5 4 3 2 1 0 –1 –2 –3 –4 –5 30 15 8 4 2 1 2 4 8 15 30 60 125 250 500 1000 2 ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 94

    94 Tr oubleshooting Guide If there is a problem, first ref er to this T roubleshooting Guide. Nothing is displayed on the LCD panel. The batteries are exhausted. / The batteries have been installed incorrectly . s Replace the batteries with new ones. / Install the batteries correctly . (p .18) The picture looks blurred. The lens focus mode s witch ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 95

    95 Major Specifications • T ype T ype ....................................35 mm AF/AE SLR camera with built-in flash Recording media ................35 mm film Image size ..........................24 x 36 mm Compatible lenses..............Canon EF lenses (except EF-S lenses) Lens mount ........................Canon EF mount (electronic control) ? ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 96

    96 Major Specifications • Exposure control Exposure metering modes ...TTL full aper ture metering with 35-zone SPC • Evaluativ e metering (linkable to any AF point) • P ar tial metering (approx. 10% of viewfinder at center) • Center-weighted av erage metering Metering range ...................EV 1 - 20 (normal temperature, 50mm f/1.4, ISO 1 ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 97

    97 • External Speedlite ..........E-TTL II/A-TTL/TTL autoflash with EOS-dedicated Speedlites • Film transport Film loading ........................A utomatic advance to frame 1. Film advance modes ..........Single-frame / continuous shooting / Self-timer/Remote control Continuous shooting speeds ...One Shot AF: Max. 4 fps AI Servo AF: Max. 3.5 ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 98

    98 Index A AE .....................................................89 AE Lock.......................................70, 92 AEB ...................................................68 AF Mode ...........................................38 AF Mode Dial ....................................15 AF P oint ............................................41 AF poi ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 99

    99 Manual Selection...............................42 Metering Modes ................................52 MF ...............................................20, 51 Midroll Rewind...................................24 Mirror Lockup ....................................75 Mode Dial ..........................................14 Multiple exposures ........... ...

  • Canon ELAN7NE-30V Date, ELAN7N-33V - page 100

    PRINTED IN T AIW AN © CANON INC. 2003 CT1-1265-000 This Instruction booklet is current as of December 2003. For inf ormation on using the camera with system accessories introduced after this date, contact y our nearest Canon Service Center. CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, T okyo 146-8501, Japan U.S .A. CANON U.S.A. INC. Fo r all inq ...

Manufacturer Canon Category Digital Camera

Documents that we receive from a manufacturer of a Canon ELAN7NE-30V Date, ELAN7N-33V can be divided into several groups. They are, among others:
- Canon technical drawings
- ELAN7NE-30V Date, ELAN7N-33V manuals
- Canon product data sheets
- information booklets
- or energy labels Canon ELAN7NE-30V Date, ELAN7N-33V
All of them are important, but the most important information from the point of view of use of the device are in the user manual Canon ELAN7NE-30V Date, ELAN7N-33V.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Canon ELAN7NE-30V Date, ELAN7N-33V, service manual, brief instructions and user manuals Canon ELAN7NE-30V Date, ELAN7N-33V. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Canon ELAN7NE-30V Date, ELAN7N-33V.

Similar manuals

A complete manual for the device Canon ELAN7NE-30V Date, ELAN7N-33V, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Canon ELAN7NE-30V Date, ELAN7N-33V by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Canon ELAN7NE-30V Date, ELAN7N-33V.

A complete Canon manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Canon ELAN7NE-30V Date, ELAN7N-33V - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Canon ELAN7NE-30V Date, ELAN7N-33V, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Canon ELAN7NE-30V Date, ELAN7N-33V, that we can find in the current document
3. Tips how to use the basic functions of the device Canon ELAN7NE-30V Date, ELAN7N-33V - which should help us in our first steps of using Canon ELAN7NE-30V Date, ELAN7N-33V
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Canon ELAN7NE-30V Date, ELAN7N-33V
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Canon ELAN7NE-30V Date, ELAN7N-33V in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Canon ELAN7NE-30V Date, ELAN7N-33V?

Use the form below

If you did not solve your problem by using a manual Canon ELAN7NE-30V Date, ELAN7N-33V, ask a question using the form below. If a user had a similar problem with Canon ELAN7NE-30V Date, ELAN7N-33V it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)