English dropdown-ico

Manual ZyXEL Communications P-660H-TX

89 pages 1.59 mb
Download

Go to site of 89

Summary
  • ZyXEL Communications P-660H-TX - page 1

    P-660H-Tx v2 Series ADSL2+ 4-port Gateway Support Notes Version3.40 Feb. 2007 ...

  • ZyXEL Communications P-660H-TX - page 2

    P-660H-Tx v2 Support Notes FAQ ................................................................................................................. 4 ZyNOS FAQ ................................................................................................. 4 1. What is ZyNOS? ........................................................................... ...

  • ZyXEL Communications P-660H-TX - page 3

    P-660H-Tx v2 Support Notes 17. What do the ATM QoS Types (C BR, UBR, VBR-nRT, VBR-RT) mean? ................................................................................................................ 14 18. What is content filter? ....................................................................... 15 ADSL FAQ .............................. ...

  • ZyXEL Communications P-660H-TX - page 4

    P-660H-Tx v2 Support Notes General Application Notes ................................................................... 27 1. Internet Access Using P-660H-Tx v2 under Bridge mode .... 27 2. Internet Access Using P- 660H-Tx v2 under Routing mode .. 29 3. Setup the P-660H-Tx v2 as a DHCP Relay .......................... 31 4. SUA Notes ............. ...

  • ZyXEL Communications P-660H-TX - page 5

    P-660H-Tx v2 Support Notes FAQ ZyNOS FAQ 1. What is ZyNOS? ZyNOS is ZyXEL's proprietary Network O perating System. It is the platform on all Prestige routers that delivers network services and applications. It is designed in a modular fashion so it is easy for developers to add new features. New ZyNOS software upgrades can be easil y downloade ...

  • ZyXEL Communications P-660H-TX - page 6

    P-660H-Tx v2 Support Notes a. Use the TELNET client program in your PC to login to your P-660H-Tx v2. b. Enter CI command 'sys stdio 0' to disable Stdio idle timeout c. To upgrade firmware, use TFTP client program to put firmware in file 'ras' in the Prestige. After data transfe r is finished, the P-660H-Tx v2 will program the u ...

  • ZyXEL Communications P-660H-TX - page 7

    P-660H-Tx v2 Support Notes 9. What is SUA? When should I use SUA? SUA (Single User Account) is a unique feature supported by Prestige router which allows multiple people to access Inte rnet concurrently for the cost of a single user account. When Prestige acting as SUA receives a packet from a local client destined for the outside Internet, it repl ...

  • ZyXEL Communications P-660H-TX - page 8

    P-660H-Tx v2 Support Notes 11. Is it possible to access a server running behind SUA from the outside Internet? How can I do it? Yes, it is possible because P-660H-Tx v2 delivers the packet to the local server by looking up to a SUA server tabl e. Therefore, to ma ke a local server accessible to the outside users, the por t number and the inside IP ...

  • ZyXEL Communications P-660H-TX - page 9

    P-660H-Tx v2 Support Notes • Many One-to-One: In Many One-to-One mo de, the P-660H-Tx v2 maps each ILA to unique IGA. • Server: In Server mode, the P-660H-Tx v2 maps multiple inside servers to one global IP address. This allows us to specify multiple servers of different types behind the NA T for outside access. Note ： if you want to map each ...

  • ZyXEL Communications P-660H-TX - page 10

    P-660H-Tx v2 Support Notes 16. How can I protect against IP spoofing attacks? The P-660H-Tx v2's filter sets provi de a means to protect against IP spoofing attacks. The basic scheme is as follows: For the input data filter: • Deny packets from the outside that claim to be from the inside • Allow everything that is not spoofing us Filter r ...

  • ZyXEL Communications P-660H-TX - page 11

    P-660H-Tx v2 Support Notes Product FAQ 1. How can I manage P-660H-Tx v2?  Multilingual Embedded Web GUI for Local and Remote management  CLI (Command-line interface)  Telnet support (Administrator Password Protected ) for remote configuration change and status monitoring  FTP/ TFTP sever, firmware upgra de and configuration backup and r ...

  • ZyXEL Communications P-660H-TX - page 12

    P-660H-Tx v2 Support Notes 4. How do I know the P-660H-Tx v2' s WAN IP address assigne d by the ISP? You can view "My WAN IP <from ISP> : x.x.x.x" shown in Web Configurator ‘Status->Device Information ->WAN Informat ion’ to check this IP address. 5. What is the micro filt er or splitter used for ? Generally, the voice ...

  • ZyXEL Communications P-660H-TX - page 13

    P-660H-Tx v2 Support Notes 9. What is DDNS? The Dynamic DNS service allows you to alias a dynamic IP address to a static hostname, allowing y our computer to be more easily accessed from various locations on the Internet. To use the service, you must first apply an account from several free Web servers such as http://www.dyndns.org/. Without DDNS, ...

  • ZyXEL Communications P-660H-TX - page 14

    P-660H-Tx v2 Support Notes and source port for the host. To pa ss IPSec packets, SUA must understand the ESP packet with protocol number 50, r eplace the source IP address of the IPSec gateway to the router's WAN IP address. However, SUA should not change the source port of the UDP packets which are used for key managements. Because the remote ...

  • ZyXEL Communications P-660H-TX - page 15

    P-660H-Tx v2 Support Notes 15. Why do we perform traffi c shaping in the P-660H-Tx v2? The P-660H-Tx v2 must manage traffic fa irly and provide bandwidth allocation for different sorts of applications, such as voice, video, and data. All applications have their own natural bi t rate. Large data transactions have a fluctuating natural bit rate. The ...

  • ZyXEL Communications P-660H-TX - page 16

    P-660H-Tx v2 Support Notes Variable bit rate(VBR) : An ATM bandwidth-allocation service that allows users to specify a throughput capacity (i .e., a peak rate) and a sustained rate but data is not sent evenly. You c an select VBR for bursty traffic and bandwidth sharing with other applicatio ns. It contains two subclass es: Variable bit rate nonrea ...

  • ZyXEL Communications P-660H-TX - page 17

    P-660H-Tx v2 Support Notes ADSL FAQ 1. How does ADSL compare to Cable modems? ADSL provides a dedicated service over a single telephone line; cable modems offer a dedicated service over a shared media. While cable modems have greater downstream bandwidth capa bilities (up to 30 Mbps), that bandwidth is shared among all users on a line, and will the ...

  • ZyXEL Communications P-660H-TX - page 18

    P-660H-Tx v2 Support Notes 4. How do I know the ADSL line is up? You can see the DSL LED Green on the P- 660H-Tx v2's front panel is on when the ADSL physical layer is up. 5. How does the P-660H-Tx v2 work on a noisy ADSL? Depending on the line quality, the P-660H-Tx v2 uses "Fall Back" and "Fall Forward" to automatically a ...

  • ZyXEL Communications P-660H-TX - page 19

    P-660H-Tx v2 Support Notes 8. What are the signaling pins of the ADSL connector? The signaling pins on the P-660H-Tx v2's ADSL connector are pin 3 and pin 4. The middle two pins for a RJ11 cable. 9. What is triple play? More and more Telco/ISPs are providing three kinds of services (VoIP, Video and Internet) over one existing ADSL connection. ...

  • ZyXEL Communications P-660H-TX - page 20

    P-660H-Tx v2 Support Notes Firewall FAQ General 1. What is a network firewall? A firewall is a system or group of syst ems that enforces an access-control policy between two networks. It may also be defined as a mechanism used to protect a trusted network from an untrusted network. The firewall can be thought of two mechanisms: One to blo ck the tr ...

  • ZyXEL Communications P-660H-TX - page 21

    P-660H-Tx v2 Support Notes address and protocol. They also 'ins pect' the session data to assure the integrity of the connection and to adapt to dynamic protocols. The flexible nature of Stateful Inspection firewalls generally provides the best speed and transparency, however, they may lack the granular application level access control or ...

  • ZyXEL Communications P-660H-TX - page 22

    P-660H-Tx v2 Support Notes 1. Those that exploits bugs in a TCP/IP implementation such as Ping of Death and Teardrop. 2. Those that exploits weaknesses in the TCP/IP specification such as SYN Flood and LAND Attacks. 3. Brute-force attacks that flood a network with useless data such as Smurf attack. 4. IP Spoofing 7. What is Ping of Death attack? Pi ...

  • ZyXEL Communications P-660H-TX - page 23

    P-660H-Tx v2 Support Notes 11 What is Brute-force attack? A Brute-force attack, such as 'Smurf' attack, targets a f eature in the IP specification known as directed or subnet broadcasting, to quickly flood the target network with useless data. A Smurf hacker flood a destination IP address of each packet as the broadcast add ress of the ne ...

  • ZyXEL Communications P-660H-TX - page 24

    P-660H-Tx v2 Support Notes 1. Change the default Administrator pa ssword since it is required when setting up the firewall. 2. Limit who can access to your P-660H -Tx v2’s Web Configurator or CLI. You can enter the IP address of the secured LAN host in Web Configurator, Advanced Setup, Advanced -> Remote MGNT -> [Service] ->Secured Clien ...

  • ZyXEL Communications P-660H-TX - page 25

    P-660H-Tx v2 Support Notes (3) WWW/Telnet service is enabled but your host IP is not the secured host entered in Web Configur ator, Advanced setup, Advanced -> Remote MGNT: (4)A filter set which blocks WWW/Telnet from WAN is applied to WAN node. You can check by command: wan node index [index #] wan node display 4. Why can't I upload the fi ...

  • ZyXEL Communications P-660H-TX - page 26

    P-660H-Tx v2 Support Notes (2) You have disabled FTP service in Web Configurator, Advanced setup, Advanced -> Remote MGNT. (3) FTP service is enabled but your host IP is not the secured host entered in Web Configurator , Advanced setup, Advanced -> Remote MGNT. (4) A filter set which blocks FTP fr om WAN is applied to WAN node. You can check ...

  • ZyXEL Communications P-660H-TX - page 27

    P-660H-Tx v2 Support Notes • Web configuration: Advanced Setup, Maintenance -> Logs -> Log Settings , check Access Control and Attacks options depending on your real situation. • CI command: sy s logs category [access | attack] (2) Enable log function in firewall def ault policy or in firewall rules. After the above two steps, you c an vi ...

  • ZyXEL Communications P-660H-TX - page 28

    P-660H-Tx v2 Support Notes Application Notes General Application Notes 1. Internet Access Using P- 660H-Tx v2 under Bridge mode • Setup your workstation • Setup your P-660H-Tx v2 under bridge mode If the ISP limits some spec ific computers to access Internet, that means only the traffic to/from these computer s will be forwarded and the other w ...

  • ZyXEL Communications P-660H-TX - page 29

    P-660H-Tx v2 Support Notes Setup your P-660H-Tx v2 under bridge mode The following procedure shows you how to configure your P-660H-Tx v2 as bridge mode. We will use Web Configurator to guide you through the related menu. (1) Configure P-660H-Tx v2 as bri dge mode and configure Internet setup parameters in Web Configur ator, Advanced Setup, Network ...

  • ZyXEL Communications P-660H-TX - page 30

    P-660H-Tx v2 Support Notes Key Settings: Option Description Encapsulation Select the correct Encapsulation type that your ISP supports. For example, RFC 1483. Multiplexing Select the correct Multiplexing type that your ISP supports. For example, LLC. VPI & VCI number Specify a VPI (Virtual Path Ident ifier) and a VCI (Virtual Channel Identifier ...

  • ZyXEL Communications P-660H-TX - page 31

    P-660H-Tx v2 Support Notes Connect the LAN ports of all computers to the LAN Interface of P-660H-Tx v2 using Ethernet cable. (2) TCP/IP configuration Since the P-660H-Tx v2 is set to DHCP server as default, so you need only to configure the workstations as the DHCP clients in the networking settings. In this case, the IP address of the com puter is ...

  • ZyXEL Communications P-660H-TX - page 32

    P-660H-Tx v2 Support Notes Option Description Encapsulation Select the correct Encapsulation type that your ISP supports. For example, RFC 1483. Multiplexing Select the correct Multiplexing type that your ISP supports. For example, LLC. VPI & VCI number Specify a VPI (Virtual Path Ident ifier) and a VCI (Virtual Channel Identifier) given to you ...

  • ZyXEL Communications P-660H-TX - page 33

    P-660H-Tx v2 Support Notes 4. SUA Notes Tested SUA/NAT Applications (e.g ., Cu-SeeMe, ICQ, NetMeeting) Introduction Generally, SUA makes your LAN appear as a single machine to the outside world. LAN users are invisible to outsi de users. However, some applications such as Cu-SeeMe, and ICQ will need to connect to the local user behind the P-660H-Tx ...

  • ZyXEL Communications P-660H-TX - page 34

    P-660H-Tx v2 Support Notes mIRC None for Chat. For DCC, please set Default/Client IP . Windows PPTP None 1723/client IP ICQ 99a None for Chat. For DCC, please set: ICQ -> preference -> connections -> firewall and set the firewall time out to 80 seconds in firewall setting. Default/client IP ICQ 2000b None for Chat None for Chat ICQ Phone 2 ...

  • ZyXEL Communications P-660H-TX - page 35

    P-660H-Tx v2 Support Notes Network Time Protocol (NTP) None 123 /server IP Win2k Terminal Server None 3389/server IP Remote Anything None 3996 - 4000/client IP Virtual Network Computing (VNC) None 5500/client IP 5800/client IP 5900/client IP A IM (AOL Instant Messenge r) None for Chat and IM None for Chat and IM e-Donkey None 4661 - 4662/client IP ...

  • ZyXEL Communications P-660H-TX - page 36

    P-660H-Tx v2 Support Notes Configure an Internal Server behind SUA Introduction If you wish, you can make internal serv ers (e.g., Web, ftp or mail server) accessible for outside users, even t hough SUA makes your LAN appear as a single machine to the outside world. A se rvice is identified by the port number. Also, since you need to specify the IP ...

  • ZyXEL Communications P-660H-TX - page 37

    P-660H-Tx v2 Support Notes Setup, Network -> NAT -> Port Forwarding. The outside users can access the local server using the P-660H-Tx v2's WAN IP address which can be obtained from Web Configurator, Status -> WAN Information . For example: Configuring an internal Web server for outside access (suppose the Server IP Address is 192.168 ...

  • ZyXEL Communications P-660H-TX - page 38

    P-660H-Tx v2 Support Notes Telnet 23 SMTP 25 DNS (Domain Name Server) 53 www-http (Web) 80 Configure a PPTP server behind SUA Introduction PPTP is a tunneling protocol defined by the PPTP forum that allows PPP packets to be encapsulated within Inte rnet Protocol (IP) packets and forwarded over any IP network, including the Internet itself. In order ...

  • ZyXEL Communications P-660H-TX - page 39

    P-660H-Tx v2 Support Notes Window98 PPTP Client / Internet / NT RAS Server Protocol Stack PPTP appears as new modem type (Virt ual Private Networking Adapter) that can be selected when setting up a connection in the Dial-Up Networking folder. The VPN Adapter type does not appear el sewhere in the system. Since PPTP encapsulates its data stream in t ...

  • ZyXEL Communications P-660H-TX - page 40

    P-660H-Tx v2 Support Notes Example The following example shows how to dial to an ISP via the P-660H-Tx v2 and then establish a tunnel to a private netwo rk. There will be three items that you need to set up for PPTP application, t hese are PPTP server (WinNT), PPTP client (Win9x) and the P-660H-Tx v2. (1) PPTP server setup (WinNT) • Add the VPN s ...

  • ZyXEL Communications P-660H-TX - page 41

    P-660H-Tx v2 Support Notes Select service name as ‘PPTP’, fill in t he Server IP Address, then press button ‘Add’. When you have finished the above settings, you can ping to the remote Win9x client from WinNT. This ping comm and is used to demonstrate that remote the Win9x can be reached across the In ternet. If the Internet connection betw ...

  • ZyXEL Communications P-660H-TX - page 42

    P-660H-Tx v2 Support Notes 5. Using Full Feature NAT When P-660H-Tx v2 is in Routing mode, you can select NAT Option as Full Feature in Network -> General ->NAT Setup Key Settings: Field Options Description Full Feature When you select this option you can select Address Mapping Set Number 1~8 in the pull-down menu on the right. Network Addres ...

  • ZyXEL Communications P-660H-TX - page 43

    P-660H-Tx v2 Support Notes The P-660H-Tx v2 has 8 remote nodes and so allows you to configure 8 NAT Address Mapping Sets, You must specify which NAT Address Mapping Set (1~8) to use in the remote node when you select Full Feature NAT. You can edit 10 rules for each Address Mapping Set. You can edit the rules for Address Mapping Sets #1 in Web Conf ...

  • ZyXEL Communications P-660H-TX - page 44

    P-660H-Tx v2 Support Notes IP. Global End IP This is the ending global IP address (IGA). N/A Type This is the NAT mapping types. Many-to-One and Server Here we’ll guide you to confi gure Address Mapping Sets from Web Configurator and CLI . (Since in Web Configurator we can only edit the rules for Address Mapping Sets #1. The other Address Mapping ...

  • ZyXEL Communications P-660H-TX - page 45

    P-660H-Tx v2 Support Notes The following table describes the fields in this screen. Field Description Option/Example Type You can select one of the fi ve mapping types from the pull-down menu 1. One-to-One 2. Many-to-One 3. Many-to-Many Overload 4. Many-to-Many No Overload 5. Server Start This is the starting lo cal IP address (ILA) 0.0.0.0 Local I ...

  • ZyXEL Communications P-660H-TX - page 46

    P-660H-Tx v2 Support Notes Setp 3: Set NAT address mapping rule for t he Address Mapping Set you just configured (Set 2 in this example) by command ‘ ip nat addrmap rule [rule#] [insert | edit] [type] [local start IP] [l ocal end IP] [global start IP] [global end IP] [server set #] ’. Suppose we set a Many-to-One rule for set 2 by command ‘ i ...

  • ZyXEL Communications P-660H-TX - page 47

    P-660H-Tx v2 Support Notes server sets ip nat server save Save the NAT server set buffer into flash ip nat server clear [set#] Clear the server set [set#], must use “sav e” command to let it save into flash ip nat server edit [rule#] active Activate the rule [rule#], rule number is 1 to 24, the number 25-36 is for UP NP application ip nat serve ...

  • ZyXEL Communications P-660H-TX - page 48

    P-660H-Tx v2 Support Notes Please note that a server can support more than one service, e.g., a server can provide both FTP and Mail service, while another provides only Web service. The following procedures show how to configure a server behind NAT. Step 1: Login Web Configur ator, Advanced Setup, Network -> NAT -> Port Forwarding. Step 2: S ...

  • ZyXEL Communications P-660H-TX - page 49

    P-660H-Tx v2 Support Notes could select Full Feature NAT and select an Address Mapping Set with a Many-to-One Rule. See the following figure. (2) Internet Access with an Internal Server In this case, we do exactly as the fi gure (use the convenient pre-configured SUA Only set) and also go to W eb Configurator, Advanced Setup, Network -> NAT -> ...

  • ZyXEL Communications P-660H-TX - page 50

    P-660H-Tx v2 Support Notes below: (3) Using Multiple Global IP addresses for clients and servers (One-to-One, Many-to-One, Server Set mapping types are used) In this case we have 3 IGAs from the I SP. We have two very busy internal FTP servers and also an internal general server for the web and mail. In this case, we want to assign the 3 IGAs by th ...

  • ZyXEL Communications P-660H-TX - page 51

    P-660H-Tx v2 Support Notes Step 1: In this case, we need to map ILA to more than one IGA, therefore we must choose the Full Feature option from the NAT field in currently active remote node, and assign IGA3 to P-660H-Tx v2’s WAN IP Address. Step 2: Go to Web Confi gurator, Advanced Setup, Network -> NAT -> Address Mapping to begin configuri ...

  • ZyXEL Communications P-660H-TX - page 52

    P-660H-Tx v2 Support Notes Rule 3 Setup: Select Many-to-One type to map the other clients to IGA3 (200.0.0.3). Rule 4 Setup: Select Server type to map our web server and mail server with ILA3 (192.168.1.20) to IGA3. Menu Network -> NAT -> Address Mapping should look as follows now: 51 All contents copyright © 2006 ZyXEL Communicati ons Cor p ...

  • ZyXEL Communications P-660H-TX - page 53

    P-660H-Tx v2 Support Notes Step 3: Now we configure a ll other incoming traffic to go to our web server and mail server from Web Conf igurator, Advanced Setup, Netw ork -> NAT -> Port Forwarding: (4) Support Non NAT Friendly Applications Some servers providing Internet applic ations such as some mIRC servers do not allow users to login using ...

  • ZyXEL Communications P-660H-TX - page 54

    P-660H-Tx v2 Support Notes One rule configured for using Many-to-Many No Overload mapping type is shown below. We can also do this by configure three One-to-One mapping type rules. 6. Using the Dynamic DNS (DDNS) • What is DDNS? The DDNS service, an IP Registry provides a public central database where information such as email addresses, hostname ...

  • ZyXEL Communications P-660H-TX - page 55

    P-660H-Tx v2 Support Notes When the ISP assigns the P-660H-Tx v2 a new IP, the P-660H-Tx v2 must inform the DDNS server the change of this IP so that the se rver can update its IP-to-DNS entry. Once the IP-to-DNS t able in the DDNS serv er is updated, the DNS name for your web server (i.e., www.zyxel.com.tw) is still usable. The DDNS servers the P- ...

  • ZyXEL Communications P-660H-TX - page 56

    P-660H-Tx v2 Support Notes For example, zyxel.com.tw. User Name Enter the user name that the DDNS server gives to you. Password Enter the password that the DDNS se rver gi ves to you. Enable Wildcard Enter the hostname for the w ildcard function that the WWW.DYNDNS.ORG supports. Note that Wildcard option is available only when the provider is http: ...

  • ZyXEL Communications P-660H-TX - page 57

    P-660H-Tx v2 Support Notes When receiving any SNMP get or se t requirement with wrong community, this trap is sent to the manager. 6. whyReboot (defined in ZYXEL-MIB) : When the system is going to restart (wa rmstart), the trap will be sent with the reason of restart before rebooting. (1) For intentional reboot : In some cases (download new files, ...

  • ZyXEL Communications P-660H-TX - page 58

    P-660H-Tx v2 Support Notes The SNMP related settings in P- 660H-Tx v2 are configured in Web Configurator, Advanced Setup, Advanced -> Remote MGNT -> SNMP The following steps describe a simple set up procedure for configuring all SNMP settings. Key Settings: Option Descriptions Get Community Enter the correct Get Community. Th is Get Community ...

  • ZyXEL Communications P-660H-TX - page 59

    P-660H-Tx v2 Support Notes 'public'. Trap Destination Enter the IP address of the NMS that you wish to send the traps to. If 0.0.0.0 is entered, the P-660H-Tx v2HW-DX will not send trap any NMS manager. Note: You may need to edit a fire wa ll rule to permit SNMP Packets. 8. Using syslog You can configure it in Web Configurator, Advanced S ...

  • ZyXEL Communications P-660H-TX - page 60

    P-660H-Tx v2 Support Notes The P-660H-Tx v2 supports three virtual LAN interfaces via its single physical Ethernet interface. The first network can be configured in Web Configurator, Advanced Setup, Network -> LAN -> DHCP Setup . The second and third networks that we call 'IP Alias 1' and 'IP Alias 2' can be configured in ...

  • ZyXEL Communications P-660H-TX - page 61

    P-660H-Tx v2 Support Notes You can edit filter rule to accept or deny LAN packets from/to the IP alias 1/2 go through the P-660H-Tx v2 by command in CLI : lan index [index number] Usage: index number =1 main LAN 2 I P A l i a s # 1 3 I P A l i a s # 2 lan filter <incoming|outgoing> <tcpip|generic> [set#] Usage: set#= the corresponding f ...

  • ZyXEL Communications P-660H-TX - page 62

    P-660H-Tx v2 Support Notes traffic among multiple paths. For example, if a network has both the Internet and remote node connections, we can rout e the Web packets to the Internet using one policy and route the FTP packets to the remote LAN using another policy. See the figure below. Use IPPR to distribute traf fic among multiple paths • Benefits ...

  • ZyXEL Communications P-660H-TX - page 63

    P-660H-Tx v2 Support Notes The actions that can be taken include rout ing the packet to a different gateway (and hence the outgoing interface) and t he TOS and precedence fields in the IP header. IPPR follows the existing packet filtering facility of ZyNOS in style and in implementation. The policies are divided into sets, where related policies ar ...

  • ZyXEL Communications P-660H-TX - page 64

    P-660H-Tx v2 Support Notes (Set the protocol ID as 6(TCP) for the rule) ip policyrouting set criteria serviceType 0 (Set the criteria type of servic e as don’t care for this rule) ip policyrouting set criteria precedence 8 (Set the precedence as don’t care for this rule) ip policyrouting set criteria packetlength 0 (Set the packet length as 0 f ...

  • ZyXEL Communications P-660H-TX - page 65

    P-660H-Tx v2 Support Notes 11. Using Call Scheduling • What is Call Scheduling? Call scheduling enables the mechanism for the P-660H-Tx v2 to run the remote node connection according to the pre-defined schedule. This feature is just like the scheduler ina video recorder which records the program according to the specified time. Users can apply at ...

  • ZyXEL Communications P-660H-TX - page 66

    P-660H-Tx v2 Support Notes wan callsch oncedate 2005 12 27 (Set the schedule used just once, it works on 2005-12-27) wan callsch starttime 12 00 (Set the schedule start time as 12:00) wan callsch duration 16 00 (Set schedule duration time as 16 hours) wan callsch action 2 (Set action as dial-on-demand) wan callsch save (Save the current call schedu ...

  • ZyXEL Communications P-660H-TX - page 67

    P-660H-Tx v2 Support Notes • Time Service in P-660H-Tx v2 There is no RTC (Real-Time Clock) chip so the P-660H-Tx v2 should launch a mechanism to get current time and date from external server in boot time. Time service is implemented by the Daytime protocol(RFC-867) , Time protocol(RFC-868) , and NTP protocol(RFC-1305) . You have to assign an IP ...

  • ZyXEL Communications P-660H-TX - page 68

    P-660H-Tx v2 Support Notes needs to be forwarded. At start up, the P-660H-Tx v2 queries all directly connected networks to gather group membership. After that, the P-660H-Tx v2 updates the information by periodic queries. The P-660H-Tx v2 implementation of IGMP is also compatible with version 1. The multicast setting can be turned on or off on Ethe ...

  • ZyXEL Communications P-660H-TX - page 69

    P-660H-Tx v2 Support Notes Fairness-Based is chosen, then the bandwidth is allocated by ratio. Which means if A class needs 300 kbps, B cla ss needs 600 kbps, then the ratio of A and B's actual bandwidth is 1: 2. So if we get 450 kbps in total, then A would get 150 kbps, B would get 300 kbps. We select Priority-Based in this example. Key Setti ...

  • ZyXEL Communications P-660H-TX - page 70

    P-660H-Tx v2 Support Notes Step 3 : You can modify the rule by clicking the button ‘Edit’ on the rule: Key Settings: RuleName Give this rule a name, for example, 'WWW' BW Budget Configure the bandwidth you would like to allocate to this rule Priority Enter a number between 0 and 7 to set the priority of this class. The higher the numb ...

  • ZyXEL Communications P-660H-TX - page 71

    P-660H-Tx v2 Support Notes Destination Subnet Mask Enter the destination subnet mask. Destination Port Enter the destination port number of the traffic. Source IP Address Enter the IP address of source that meat s this class. Note that for traffic from 'LAN to WAN' , since BWM is before NAT, you should use the IP address before NAT proces ...

  • ZyXEL Communications P-660H-TX - page 72

    P-660H-Tx v2 Support Notes services of the line will be. After t hat, system will save back the correct VPI, VCI and also services (encapsulation) type into profile of WAN interface. • Configure the VC auto-hunt ing preconfigured table. (1) Display auto-haunting preconfigured table by using command from CLI : wan atm vchunt display (2) Add items ...

  • ZyXEL Communications P-660H-TX - page 73

    P-660H-Tx v2 Support Notes (3) Delete items from the auto-haunting preconfigur ed table by useing command: wan atm vchunt remove <remote node> <vpi> <vci> • Using Zero configuration. You can enable/disable Zero Configuration in Netw ork -> WAN -> Advanced Setup: (1) After configure the auto-haunting pr econfigured table. Y ...

  • ZyXEL Communications P-660H-TX - page 74

    P-660H-Tx v2 Support Notes (4) Basically the zero conf iguration only work on the VC that was preconigured in the auto-haunting preconfigured table. 15. How could I configure tr iple play on P-660H-Tx v2? The common triple play scenario is as follows: 0/32 Triple Play is a port-based policy to fo rward packets from different LAN port to different P ...

  • ZyXEL Communications P-660H-TX - page 75

    P-660H-Tx v2 Support Notes The packet filter function on P-660H-Tx v2 is the same as befor e, just that you could only configure the filter set and apply them by command in CLI. It’s very complex for common users to do it. So here’s the recommendation: (1) Usually if you want to block special packets, you could edit a firewall rule in Web Confi ...

  • ZyXEL Communications P-660H-TX - page 76

    P-660H-Tx v2 Support Notes • Apply to LAN Interface: lan index [index#] Usage: index#=1 main LAN 2 I P A l i a s # 1 3 I P A l i a s # 2 lan filter <incoming|outgoing> <tcpip |generic> <set1#> <set2#> <set3#> <set4#> Usage: You can apply at mo st four filter sets to LAN Interface. lan save (3) If you are very a ...

  • ZyXEL Communications P-660H-TX - page 77

    P-660H-Tx v2 Support Notes mask] the rule sys filter set destport [port#] [compare type = none|equal|notequal|less|greate r] Set the destination port and compare type (co mpare type could be 0(none)|1(eq ual)|2(not equal)|3(less)|4(greater) ) sys filter set srcip [address] [subnet mask] Set the source IP address and subnet mask sys filter set s rcp ...

  • ZyXEL Communications P-660H-TX - page 78

    P-660H-Tx v2 Support Notes Support Tool 1. LAN/WAN Packet Trace The Prestige packet trace records and analyzes packets running on LAN and WAN interfaces. It is designed for us ers with technical backgrounds who are interested in the details of the packet fl ow on LAN or WAN end of Prestige. It is also very helpful for diagnostics if y ou have compa ...

  • ZyXEL Communications P-660H-TX - page 79

    P-660H-Tx v2 Support Notes (2) Trace WAN packet • Disable the capture of t he LAN packet by entering: sys trcp channel enet0 none • Enable to capture the WAN packet by entering: sys trcp chann el mpoa00 bothway • Enable the trace log by entering: sys trcp s w on & sys trcl sw on • Display the brief trac e online by entering: sys tr cd b ...

  • ZyXEL Communications P-660H-TX - page 80

    P-660H-Tx v2 Support Notes • Offline Trace • Disable the capture of t he WAN packet by entering: sys trcp channel mpoa00 none • Enable the capture of t he LAN packet by entering: sys trcp channel enet0 bothway • Enable the trace log by entering: sys trcp s w on & sys trcl sw on • Wait for packet passing through the Prestige over LAN ? ...

  • ZyXEL Communications P-660H-TX - page 81

    P-660H-Tx v2 Support Notes • Capture the detailed l ogs by Hyper Terminal Step 1: Initiate a hyper terminal connection from your PC(suppose you connected to the LAN port of P-660H-Tx v2) Step 2: Click the ‘properties’ to conf igure parameters to telnet to the P-660H-Tx v2. 80 All contents copyright © 2006 ZyXEL Communicati ons Cor poration. ...

  • ZyXEL Communications P-660H-TX - page 82

    P-660H-Tx v2 Support Notes Step 3: So that after you invoke the relevant commands, you could save the logs you’ve captured. 81 All contents copyright © 2006 ZyXEL Communicati ons Cor poration. ...

  • ZyXEL Communications P-660H-TX - page 83

    P-660H-Tx v2 Support Notes 2. Firmware/Configurations Upload ing and Downloading using TFTP • Using TFTP client software • Upload/download ZyNOS via LAN • Upload/download Prestige c onfigurations via LAN (1) Using TFTP to upload/dow nload ZyNOS via LAN Step 1: TELNET to your Prestige first before running the TFTP software Step 2: Type the CI ...

  • ZyXEL Communications P-660H-TX - page 84

    P-660H-Tx v2 Support Notes The 192.168.1.1 is the IP addr ess of the Prestige. The lo cal file is the source file of the ZyNOS firmware that is availa ble in your hard disk. The remote file is the file name that will be saved in Pr estige. Check the port number 69 and 512-Octet blocks for TFTP. Check 'Binary' mode for fi le transfering. ( ...

  • ZyXEL Communications P-660H-TX - page 85

    P-660H-Tx v2 Support Notes  The 192.168.1.1 is the IP address of the Prestige.  The local file is the source file of y our configuration file that is available in your hard disk.  The remote file is the file name that will be saved in Prestige.  Check the port number 69 and 512-Octet blocks for TFTP.  Check 'Binary' mode fo ...

  • ZyXEL Communications P-660H-TX - page 86

    P-660H-Tx v2 Support Notes [cppwu@faelinux cppwu]$ tftp -I 192.168.1.1 put [local-ras] ras <- upload firmware 3. Using FTP to Upload the Firmware and Configuration Files In addition to upload the firmware and conf iguration file via the console port and TFTP client, you can also upload t he firmware and configuration files to the Prestige using ...

  • ZyXEL Communications P-660H-TX - page 87

    P-660H-Tx v2 Support Notes 'Binary' . Step 2: Press 'OK' to ignore the 'Username' prompt. Step 3: To upload the firmware file, we transfer the local 'ras' file to overwrite the remote 'ras' file. To upload the configurati on file, we transfer the local 'rom-0' to overwrite the remote &apos ...

  • ZyXEL Communications P-660H-TX - page 88

    P-660H-Tx v2 Support Notes Step 4: The Prestige reboots automatica lly after the uploading is finished. Please do not power off the router at this moment. 87 All contents copyright © 2006 ZyXEL Communicati ons Cor poration. ...

  • ZyXEL Communications P-660H-TX - page 89

    P-660H-Tx v2 Support Notes CI Command Reference Command Syntax and General User Interface CI has the following command syntax: command < iface | device > subcommand [ param ] command subcommand [ param ] command ? | help command subcommand ? | help General user interface: 1. ? Shows the following commands and all major (sub)commands 2. exit E ...

Manufacturer ZyXEL Communications Category Car Stereo System

Documents that we receive from a manufacturer of a ZyXEL Communications P-660H-TX can be divided into several groups. They are, among others:
- ZyXEL Communications technical drawings
- P-660H-TX manuals
- ZyXEL Communications product data sheets
- information booklets
- or energy labels ZyXEL Communications P-660H-TX
All of them are important, but the most important information from the point of view of use of the device are in the user manual ZyXEL Communications P-660H-TX.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals ZyXEL Communications P-660H-TX, service manual, brief instructions and user manuals ZyXEL Communications P-660H-TX. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product ZyXEL Communications P-660H-TX.

Similar manuals

A complete manual for the device ZyXEL Communications P-660H-TX, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use ZyXEL Communications P-660H-TX by users. Manuals are usually written by a technical writer, but in a language understandable to all users of ZyXEL Communications P-660H-TX.

A complete ZyXEL Communications manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual ZyXEL Communications P-660H-TX - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the ZyXEL Communications P-660H-TX, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the ZyXEL Communications P-660H-TX, that we can find in the current document
3. Tips how to use the basic functions of the device ZyXEL Communications P-660H-TX - which should help us in our first steps of using ZyXEL Communications P-660H-TX
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with ZyXEL Communications P-660H-TX
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of ZyXEL Communications P-660H-TX in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning ZyXEL Communications P-660H-TX?

Use the form below

If you did not solve your problem by using a manual ZyXEL Communications P-660H-TX, ask a question using the form below. If a user had a similar problem with ZyXEL Communications P-660H-TX it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)