English dropdown-ico

Manual Sharp MD-MS702

44 pages 1.08 mb
Download

Go to site of 44

Summary
  • Sharp MD-MS702 - page 1

    MD-MS702 MD-R2 PORTABLE MINIDISC RECORDER MODEL MD-MS702 OPERATION MANUAL ...

  • Sharp MD-MS702 - page 2

    INTRODUCTION Thank you for purchasing this SHARP product. For the best performance, read this manual carefully. It will guide you in operating your SHARP product. CONTENTS ACCESSORIES Page ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 SPECIAL NOTES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Sharp MD-MS702 - page 3

    SPECIAL NOTES ● It is the intent of Sharp that this product be used in full compliance with the copyright laws of the United States and that prior permission be obtained from copyright owners whenever necessary. Caution - use of controls or adjust- ments or performance of proce- dures other than those specified herein may result in hazardous radi ...

  • Sharp MD-MS702 - page 4

    ■ Important ● Do not wear your headphones when you are crossing streets or near traffic. ● Do not use your headphones while driving a motor vehicle, it may create a dangerous traffic hazard and may be illegal. Remember to obey all of the safety rules in your area. ● Do not play the unit at a high volume. Hearing experts advise against ex- t ...

  • Sharp MD-MS702 - page 5

    ● A rechargeable lithium-ion battery is the only kind that can be used. Even if the battery supplied with the unit is not used, you should charge it at least once every three months to main- tain the battery. ● The rechargeable battery can be charged approximately 300 times. ● Do not use any battery other than that specified. Use of other bat ...

  • Sharp MD-MS702 - page 6

    ■ Main unit 1. Monaural Long-Play Mode Indicator 2. Record Indicator 3. Level Meter 4. Repeat Indicator: 5. TOC Indicator 6. Battery Indicator: 7. Random Indicator 8. Track Number Indicator 9. Character/Time Information Indicator 10. Synchro Recording Indicator 11. Disc Mode Indicator 12. Disc Name Indicator 13. Track Name Indicator 14. Remaining ...

  • Sharp MD-MS702 - page 7

    ■ Rechargeable battery power When the rechargeable battery is used for the first time or when you want to use it after a long period of non use, be sure to charge it fully. 1 Open the rechargeable battery com- partment cover. 2 Insert the rechargeable battery. ● Insert the side with the arrow first. 3 Close the rechargeable battery com- partmen ...

  • Sharp MD-MS702 - page 8

    Cautions: ● When using the rechargeable battery and the alkaline batteries at the same time, do not remove either of them. If you do, while the unit is in the play mode, playback will stop. When in the recording mode, the recorded contents will be erased, and the power may be disconnected. ● Do not replace the batteries or the rechargeable batt ...

  • Sharp MD-MS702 - page 9

    (1) Analog recording Connect the unit to equipment that has a line output jack, using the cable included with this unit. ● Main equipment: CD player, MD player, radio cassette player, etc. ● Cable required: Connecting cable in- cluded with this unit (2) Digital recording Connect the unit to equipment that has an optical output jack using an opt ...

  • Sharp MD-MS702 - page 10

    ● Playback-only MiniDisc: This type of MiniDisc usually contains commercially available pre-recorded music. This is the same kind of optical disc as CDs. Playback is performed using an optical pickup. (Recording and editing are not pos- sible.) There will only be a shutter on one side (the back). ● Recordable MiniDisc: This is a “raw disc” ...

  • Sharp MD-MS702 - page 11

    ■ Recording from CDs or MDs (Synchro recording) ● Synchro recording is a method that detects the playback sound from the source equipment. When sound is present, it automatically starts the recording. When the source is silent, the recording will be paused. 1 Connect the external equipment. (See page 8.) 2 Insert a recordable MiniDisc. 3 Press ...

  • Sharp MD-MS702 - page 12

    ■ Recording from a tuner or a CD (Manual recording) ● Manual recordings can be started and stopped as you like. Recordings can not be made in the following situations: ● Recording on a playback-only Mini- Disc (commercially available music) ● If a Minidisc is protected against ac- cidental erasure (page 9) About the recording level: ● If ...

  • Sharp MD-MS702 - page 13

    This is the method used to record digital signals from CDs or MDs exactly as they are stored on the original. Compared to recordings made from analog inputs, digital record- ings have extremely high-quality sound. RECORDING USING AN OPTIONALLY AVAILABLE DIGITAL CABLE 1 Connect the external equipment. (See page 8.) 2 Start recording. Synchro recordi ...

  • Sharp MD-MS702 - page 14

    ■ Recording from the microphone (Mic synchro recording) The recording will begin automatically in response to a noise or a person speaking. When the sound stops, the recording will pause. This function is convenient when recording lectures, conferences, etc. RECORDING USING A MICROPHONE VOL / NAME Stereo microphone (commercially available) To the ...

  • Sharp MD-MS702 - page 15

    6 When a sound, such as a person speaking, is picked up by the microphone, recording will begin auto- matically. ● If a silence lasts for 3 seconds or more, the recording will be paused automat- ically. However, the unit will not pause for about the first 10 seconds after recording has started. To interrupt a synchro recording: Press the button w ...

  • Sharp MD-MS702 - page 16

    ■ Creating marks while making a mic recording (Timed auto mark function) Marks can be created at a fixed interval (every 5 minutes is the default setting) so that the beginning of any track can be found. The interval at which marks are created can be changed by the user. While in the recording stand-by mode or while recording, press the EDIT/A.MA ...

  • Sharp MD-MS702 - page 17

    ■ Recording tracks as a single track You can record several pieces of music as a single track, disable the auto marker function. 1 Press the EDIT/A. MARK/TIME MARK button while the recording is paused. 2 Press the button. ● Recording will start. Note: ● When making digital recordings using a CD player or an MD player, track num- bers will be ...

  • Sharp MD-MS702 - page 18

    ■ To check the remaining disc time While recording, you can check the remaining time available on the disc. Press the DISPLAY button while recording or while in the recording pause mode. ● When the DISPLAY button is pressed again, the unit will return to the initial display. Note: ● The display of the remaining disc time may vary slightly fro ...

  • Sharp MD-MS702 - page 19

    ■ To erase tracks To erase tracks one at a time: 1 Start playing the track you want to erase, and press the button. ● The unit will enter the pause mode. 2 Press the EDIT/A.MARK/TIME MARK button to select “ERASE”. 3 Press the ENTER/F.PLAY/SYNCHRO button. ● To cancel the operation, press the ■ /:OFF button. 4 Press the ENTER/F.PLAY/SYNCH ...

  • Sharp MD-MS702 - page 20

    When recording from analog inputs: (Including digital inputs other than CDs or MiniDiscs) A new track number will be automatically created whenever 1 second or more of silence occurs in the source. (Auto marker function) ● If there is some noise in the “silent” spaces from the source, the track num- bers may not be created at the correct posi ...

  • Sharp MD-MS702 - page 21

    ■ About TOC recording When you start recording or editing, “TOC” will appear in the display. This indicates that information in the TOC is now being changed according to record- ing or editing being performed. ● The changed TOC information will not be recorded on the MiniDisc right away. Notes: ● While “TOC” is displayed, the MiniDisc ...

  • Sharp MD-MS702 - page 22

    1 Insert the headphones plug firmly into the headphones jack on the remote control unit. 2 Plug th e remote contro l unit int o the jack on th e m ai n un i t. Pus h th e pl ug all the way in. ● Since the remote control unit plug has only one correct orientation, plug it in as shown in the drawing. 3 Load a MiniDisc in the direction indi- cated b ...

  • Sharp MD-MS702 - page 23

    To interrupt playback: Press the button during playback. ● To resume playback, press the button again. To stop playback: Press the ■ /:OFF button. ● When you press the button to re- sume playback, it will start at the point on the disc where playback was halted (Resume function). However, if the MiniDisc is removed and reinserted, playback wi ...

  • Sharp MD-MS702 - page 24

    ■ APSS (Auto Pr ogram Sear ch System) APSS automatically locates the beginning of any track. To move to the beginning of the next track: Press the button during playback. To re-start the track being played: Press the button during playback. To skip a number of tracks at one time, press the or button repeatedly until the desired track number is sh ...

  • Sharp MD-MS702 - page 25

    PLAY MODE MODE/INS ■ To play at double speed (Mono recording only) Press the ENTER/ F. PLAY/SYNCHRO button while a MiniDisc recorded in the monaural long-play mode is being played. ● The unit will display “FAST PLAY” and start fast playback. ● When t he ENTER/ F. PLAY/SYNCHRO button is pressed again, the unit will return to normal play. N ...

  • Sharp MD-MS702 - page 26

    ■ To check the remaining recording time and the total playing time While in the stop mode, press the DIS- PLAY button. ● Each time the button is pressed, the display will change as follows: Note: If character information was not originally recorded on the MiniDisc, nothing will be displayed. ■ To check the elapsed time and remaining time of t ...

  • Sharp MD-MS702 - page 27

    EDITING ■ What t he editi ng functi on can do You can create original discs using the MD editing function, on which you can change the order of the tracks and you can create disc or track names. ● Playback-only MiniDiscs cannot be edited. ● All of the characters and data on a recorded MD (master MD with tracks and character information) can b ...

  • Sharp MD-MS702 - page 28

    ■ Move 1 Play the track to be moved, and press the button. ● The unit will enter the pause mode. 2 Press the EDIT/A.MARK/TIME MARK button to select “MOVE”. 3 Press the ENTER/F.PLAY/SYNCHRO button. ● To cancel the operation, press the ■ /:OFF button. 4 Press the or button to select the direction to move. ● To increase the track number ...

  • Sharp MD-MS702 - page 29

    Continued on the following page. ■ Combine 1 Start playing the last of the two tracks you want to combine, and press the but- ton. ● The unit will enter the pause mode. 2 Press the EDIT/A.MARK/TIME MARK button to select “COMBINE”. 3 Press the ENTER/F.PLAY/SYNCHRO button. ● To cancel the operation, press the ■ /:OFF button. 4 Press the E ...

  • Sharp MD-MS702 - page 30

    5 When the letter you want is displayed, press the button. ● To enter more letters in the name, repeat steps 3 - 5. 6 When the disc name has been completely entered, press the ENTER/F.PLAY/SYN- CHRO button. If an incorrect letter is entered: To erase a character: Press the or button to move the cursor to the character you want to erase, and then ...

  • Sharp MD-MS702 - page 31

    Continued on the following page. ■ To change tr ack name s or disc names Some MiniDiscs created on other equip- ment may have more than 100 characters in a track name or disc name. The charac- ters from the 101st character and on can- not be corrected or changed. To change characters: 1 Put the unit in the character input mode. ● To change char ...

  • Sharp MD-MS702 - page 32

    ● Check whether the total number of tracks on the newly recorded MiniDisc matches the total number of tracks on the master MiniDisc. If they do not match each other, combine or divide tracks using the edit operation. (Pages 27–28) ● This function can not be performed from pre-recorded (playback only) Mini- Discs. 2 When the recording is compl ...

  • Sharp MD-MS702 - page 33

    ■ Listening through a car stereo ● The recording will be made in the analog mode. ● When you want to listen to a disc using a separate stereo system or radio cas- sette player, it is recommended that you adjust the volume on the MiniDisc unit to maximum. ● The optionally available cassette adap- tor may not work, depending on your car’s s ...

  • Sharp MD-MS702 - page 34

    ■ Checking the remaining amount of battery charge The remaining amount of battery charge is show n b y th e b at tery in di ca tor ( ) during operation. < How to read the battery indicator > ● When the battery is completely dis- charged, the whole battery indicator will flash. Recharge the battery or replace the alkaline batteries with ne ...

  • Sharp MD-MS702 - page 35

    ■ To eliminate the confirmation sound Every time a button is pressed, a “beep” will be heard in the headphones. To silence the “beep” sound, do the follow- ing: 1 While in the stop mode ... Hold down the PLAY MODE button or the MODE/INS button until “SET UP” appears. ● When you release the button, “BEEP 1 (BEEP ON)” will appear. ...

  • Sharp MD-MS702 - page 36

    ■ To cancel the auto-play function When a MiniDisc is inserted, the power will be turned on and playback will begin auto- matically. You can cancel automatic playback. 1 While in the stop mode ... Hold down the PLAY MODE button or the MODE/INS button until “SET UP” appears. ● When you release the button, “BEEP 1 (BEEP ON)” or “BEEP 0 ...

  • Sharp MD-MS702 - page 37

    A MiniDisc is a disc inside a protective cartridge. You can handle it freely without worrying about dust, fingerprints, etc. However, if dust enters the opening of the cartridge, or there is excessive dirt on the cartridge, or the cartridge becomes warped, you may experience malfunc- tions. Please note the following. ■ Handling the MiniDisc Do no ...

  • Sharp MD-MS702 - page 38

    ■ If troubl e occurs When this product is subjected to strong external interference (mechanical shock, excessive static electricity, abnormal supply voltage due to lightning, etc.) or if it is operated incorrectly, it may malfunction. If such a problem occurs, do the following: 1. Unplug the AC adaptor from the AC outlet. 2. Remove the battery. 3 ...

  • Sharp MD-MS702 - page 39

    Even if the maximum recording time of a MiniDisc has not been reached, “DISC FULL” or “TOC FULL” may be displayed. When the number of tracks used reaches the limit, regardless of the remaining recording time, further recording will be impossible. (Maximum number of tracks: 254) If a MiniDisc has been recorded or edited repeatedly or if a Mi ...

  • Sharp MD-MS702 - page 40

    Error messages Meaning Remedy BATT EMPTY ● The battery has run down. ● Charge the rechargeable battery or replace the alkaline batteries (or use the AC adaptor for power). BLANK DISC ● Nothing is recorded. ● Replace the disc with a recorded disc. Can’t COPY ● No copy can be made because of the SCMS copyright system. ● Record using the ...

  • Sharp MD-MS702 - page 41

    MAINTENANCE As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units. ■ General Power s ...

  • Sharp MD-MS702 - page 42

    ● The continuous recording time is for analog inputs when the volume level is set to “VOL 0”. ● The continuous play time shows the value when the volume level is set to “VOL 15”. ● The above values are the standard values when the unit is charged and used at an ambient temperature of 68˚F (20 ° C). ● The operating time when using ...

  • Sharp MD-MS702 - page 43

    MEMO ...

  • Sharp MD-MS702 - page 44

    SHARP ELECTRONICS CORPORATION Sharp Plaza, Mahwah, New Jersey 07430-2135 SHARP CORPORATION TINSZ1359AFZZ Printed in Japan A9712.1.0MYM.SM MD-MS702 LIMITED WARRANTY SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the “Product”), when shipped in its original container, will be free from defect ...

Manufacturer Sharp Category MP3 Player

Documents that we receive from a manufacturer of a Sharp MD-MS702 can be divided into several groups. They are, among others:
- Sharp technical drawings
- MD-MS702 manuals
- Sharp product data sheets
- information booklets
- or energy labels Sharp MD-MS702
All of them are important, but the most important information from the point of view of use of the device are in the user manual Sharp MD-MS702.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Sharp MD-MS702, service manual, brief instructions and user manuals Sharp MD-MS702. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Sharp MD-MS702.

Similar manuals

A complete manual for the device Sharp MD-MS702, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Sharp MD-MS702 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Sharp MD-MS702.

A complete Sharp manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Sharp MD-MS702 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Sharp MD-MS702, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Sharp MD-MS702, that we can find in the current document
3. Tips how to use the basic functions of the device Sharp MD-MS702 - which should help us in our first steps of using Sharp MD-MS702
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Sharp MD-MS702
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Sharp MD-MS702 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Sharp MD-MS702?

Use the form below

If you did not solve your problem by using a manual Sharp MD-MS702, ask a question using the form below. If a user had a similar problem with Sharp MD-MS702 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)