-
Pyle PLCD10MR - page 1
OWNER’S MANUAL Mobile Audio System • MP3/CD Player • PLL Synthesizer Stereo Radio • Compact Disc Player • Automatic Memory Storing • Full Detachable Panel • Preset Equalization • Electronic Shockpr oof (ESP) Function • Auxiliary Input Function • Remote Control www .pyleaudio.com PLCD10MR ...
-
Pyle PLCD10MR - page 2
2 CONTENTS Installation ........................................... 3 T ake out screw befor e installation.........3 DIN Front-Mount (Method A) ................3 Installing the unit .................................3 Removing the unit ...............................4 DIN Rear -Mount (Method B) .................5 Using the detachable front panel ... ...
-
Pyle PLCD10MR - page 3
3 INST ALLA TION Notes: • Choose the mounting location where the unit will not interfere with the normal driving function of the driver . • Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly . • Use only the parts included with the unit to ...
-
Pyle PLCD10MR - page 4
grounding of the unit. Note to install the short threading terminal of the mounting bolt to the back of the unit and the other long threading terminal to the dashboard. 10. Reconnect the cable to the vehicle battery's negative (-) terminal. Then replace the outer trim ring and install the unit's front panel. (see the steps of “installin ...
-
Pyle PLCD10MR - page 5
DIN REAR-MOUNT (Method B) If your vehicle is a Nissan, Toyota, follow these mounting instructions. Use the screw holes marked T (T oyota), N (Nissan) located on both sides of the unit to fasten the unit to the factory radio mounting brackets supplied with your vehicle. T o fasten the unit to the factory radio mounting brackets. Align the screw hole ...
-
Pyle PLCD10MR - page 6
USING THE DET ACHABLE FRONT P ANEL REMOVING THE FRONT P ANEL 1. Pr ess the release button (RELEASE) on the front panel and pull of f the front panel. 2. Keep fr ont panel into the case. INST ALLING THE FRONT P ANEL T o install the front panel, insert the panel into the housing and make sure the panel is properly installed. Otherwise, abnormality oc ...
-
Pyle PLCD10MR - page 7
7 WIRING CONNECTION FRONT Lch SPEAKER GREEN GREEN/BLACK MEMORY BACK-UP (B+) MAIN UNIT IGNITION SWITCH (ACC+) POWER ANTENNA RED GROUND (B–) YELLOW BLACK BLUE REAR RCA CABLE ANTENNA CONNECTOR (GREY) Rch RED Lch WHITE WHITE WHITE/BLACK REAR Lch SPEAKER VIOLET VIOLET/BLACK GREY GREY/BLACK FRONT Lch SPEAKER REAR Rch SPEAKER FUSE FUSE ...
-
Pyle PLCD10MR - page 8
8 OPERA TION LOCA TION OF KEYS 24 7 9 14 3 6 15 5 8 4 11 10 25 2 1 23 22 21 20 18 13 19 17 12 16 26 ...
-
Pyle PLCD10MR - page 9
9 OPERA TION SWITCHING ON/OFF THE UNIT Switch on the unit by pressing any button (except button (7) and button (4)). When system is on, press button (9) to turn off the unit. F ACEPLATE RELEASE Press button (7) to detach the removable faceplate. SOUND ADJUSTMENT Press SEL button (10) to select the desir ed adjustment mode. The adjustment mode will ...
-
Pyle PLCD10MR - page 10
10 RADIO OPERA TION • SWITCHING TO RADIO MODE Press MODE button (6) shortly to select radio mode, the radio mode appears in the display together with the memory band and frequency . • SELECTING THE FREQUENCY BAND At radio mode, press BND/LOU (ENT) button (13) shortly to select the desired band. The reception band will change in the following or ...
-
Pyle PLCD10MR - page 11
11 OPERA TION • PLA YING ALL TRACKS IN RANDOM Press SHF button (23) to play all tracks on CD in random order . Press again to cancel the function. • EJECTING A DISC Press button (4) to stop CD playing and eject the disc from the disc slot (5). MP3 OPERA TION (FOR WITH MP3 OPERA TION VERSION ONL Y) • SWITCHING TO CD (MP3) MODE If there is no M ...
-
Pyle PLCD10MR - page 12
12 OPERA TION (‘ ‘), then - Use the TUNE/TRACK UP/DOWN buttons to list all songs under this directory and select the title. - Press BND/LOU (ENT) button to confirm and start the play . - Repeat the above steps if the newly selected title is again a directory . • Searching Fr om Root Directory Press AMS (D-AUD) button for thr ee times. The uni ...
-
Pyle PLCD10MR - page 13
13 REMOTE CONTROL HANDSET FUNCTION KEYS & CONTROL 1. PWR Power ON/OFF Button 2. DSP (0) Display Button (_,-,+,0 For MP3/WMA Operation) 3. SEL Sound Mode Select Button (Character Shift Right For MP3/WMA Operation) 4. VOL V olume Up Button (Character Select (A, B~8,9,0) For MP3/WMA Operation) 5. VOL V olume Down Button (Character Select (A,B~8,9, ...
-
Pyle PLCD10MR - page 14
14 OPERA TION DISC NOTE A. Notes on discs: 1. Attempting to use non-standard shape discs (e.g. square, start, heart) may damage the unit. Be sure to use r ound shape CD discs only for this unit. 2. Do not stick paper or tape etc., onto the label side or the recor ding side of any discs, as it may cause a malfunction. 3. Dirt, dust, scratches and wa ...
-
Pyle PLCD10MR - page 15
15 GENERAL P o wer Supply Requirements : DC 12 V olts, Negative Ground Chassis Dimensions : 178 (W) x 160 (D) x 50 (H) Tone Controls - Bass (at 100 Hz) : ± 10 dB - T reble (at 10 KHz) : ± 10 dB Maximum Output P ower : 4 x 25 W atts Current Drain : 5 Ampere (max.) CD PLA YER Signal to Noise Ratio : Mor e than 55 dB Channel Separation : More than 4 ...
-
Pyle PLCD10MR - page 16
TROUBLE SHOOTING Before going thr ough the check list, check wiring connection. If any of the problems persist after check list has been made, consult your nearest service dealer . Symptom Cause Solution No power . The car ignition switch is If the power supply is not on. connected to the car accessory circuits, but the engine is not moving, switch ...
Do you have a question concerning Pyle PLCD10MR?
Use the form below
If you did not solve your problem by using a manual Pyle PLCD10MR, ask a question using the form below. If a user had a similar problem with Pyle PLCD10MR it is likely that he will want to share the way to solve it.