English dropdown-ico

Manual Barco R9010270

165 pages 7.93 mb
Download

Go to site of 165

Summary
  • Barco R9010270 - page 1

    RLM R6+ P er f or me r Owners manual R9010270 R5976816/03 02/06/2006 ...

  • Barco R9010270 - page 2

    Barco nv Eve nts Noordl aan 5, B-8520 Kuurne Phone: +32 56.36.89.70 Fax: +32 56.36.88.24 E-mail: sales.events@barco.com Visit us at the web: www.barco.com Printed in Taiwan ...

  • Barco R9010270 - page 3

    Changes Barco provides this manual ’as is’ without warranty of any kind, either ex pressed or implied, including but not limited to the i mplied war- ranties or merchantability and fitness for a particular purpose. Ba rco m ay make improvements and/or changes to the product(s) and/or the program(s) described in this publication at any time with ...

  • Barco R9010270 - page 4

    ...

  • Barco R9010270 - page 5

    Table of con tents T ABLE OF CONTENTS 1 . P a c k a g i n g a n d D i m e n s i o n s ...................................................................................... 5 1 . 1 B o x c o n t e n t ........... ................... ............... ................... ............... .................. ............... ........ ... 5 1 . 2 P r o j e ...

  • Barco R9010270 - page 6

    Table of con tents 7 . G e n e r a l M e n u ......................................................................................................5 7 7.1 General Menu overview . . .............................. ............... ................... ............... .................. .......... 5 7 7 . 2 P a u s e ................................ ... ...

  • Barco R9010270 - page 7

    Table of con tents 1 3 . 3 M e n u b a r p o s i t i o n ....................... ................... ............... .................. ............... .................. ...... 1 2 0 1 3 . 4 S t a t u s b a r p o s i t i o n ........................... .................. ............... ................... ............... ............ ........1 2 ...

  • Barco R9010270 - page 8

    Table of con tents 4 R5976816 R LM R6+ PERFORMER 02/06/2006 ...

  • Barco R9010270 - page 9

    1. Pa ckaging and Dimensions 1. P ACKAGING AND DIMENSIONS Overview • Box content • Projector Packaging • Dimensions 1.1 Box content CEE7 European power plug to connect the power cord to the wall outlet. ANSI 73.1 1 American power plug to connect the power cord to the wall outlet. Content • 1 RLM R6+ Performer projector (weigh t ± 30 kg or ...

  • Barco R9010270 - page 10

    1. Packaging and Dime nsions PULL TO OPE Image 1-1 Image 1 -2 Projector packa ging Save the original shipping carton and packi ng material, they will be necessary if you ever have to ship your projector . For maxim um protection, repack your projector as it was originally pa cked at the factory . 6 R5976816 R LM R6+ PERFORMER 02/06/2006 ...

  • Barco R9010270 - page 11

    1. Pa ckaging and Dimensions 1.3 Dimensions Side view 289,7 11,406 [] 2,3 ,091 [] 316,5 12 461 [ ] 2 4,5 ,965 [ ] Image 1-3 Side view Front view 705 [27.76] 51.9 [ 2.04 ] 43 [1.69] 180 [7.09] 93.5 [3.68] Image 1-4 Front view R5976816 RL M R6+ PERFORMER 02/06/2006 7 ...

  • Barco R9010270 - page 12

    1. Packaging and Dime nsions Bottom view 170 [6.69] 60 [2.36] 170 [6.69] 1 3 0 [ 5 . 1 2 ] 6 0 [ 2 . 3 6 ] 1 3 0 [ 5 . 1 2 ] 120 [4.72] 60 [2.36] 354.5 [ 1 3 . 96] 200 [7.87] 120 [4.72] 27.2 [1.07] 76.8 ° 2 [0.079] 188.8 [7.43] 492.4 [19.39] 1 3 0 [ 5 . 1 2 ] 6 0 [ 2 . 3 6 ] 1 3 0 [ 5 . 1 2 ] Image 1-5 Bottom view 8 R5976816 R LM R6+ PERFORMER 02/ ...

  • Barco R9010270 - page 13

    1. Pa ckaging and Dimensions To p v i e w 460 [18.11] 122.5 [4.82] 570 [22.44] 82.5 [3.25] 540 [21.26] 705 [27.76] 82.5 [3.25] 707.8 [27 87] 122.5 [4.82] Image 1-6 To p v i e w R5976816 RL M R6+ PERFORMER 02/06/2006 9 ...

  • Barco R9010270 - page 14

    1. Packaging and Dime nsions 10 R5976816 R LM R6+ PERFORMER 02/06/2006 ...

  • Barco R9010270 - page 15

    2. Installation Guidelines 2. INST ALLA TION GUIDELINES Overview • General • Projector Configuration • Lenses • Battery Insertion in the R emote Control • Stacking projectors • Rigging points and accessories W ARNING : Before installing t he projector , read first the safety in structions. 2.1 General W ARNING : Before installing t he p ...

  • Barco R9010270 - page 16

    2. Installation G uidelines Special Care for Laser Beams Special care should be used when DLP projectors are used in the sam e room as performant laser equipment. Di rect or indirect hitting of a laser beam on to the lens can severely dam age the Digital MicroMirror Devices™ in which case there is a loss of warranty Which screen type ? There are ...

  • Barco R9010270 - page 17

    2. Installation Guidelines PD A B C PD Image 2-1 Front-Ceiling con figuration A Side view B T op view CB a c k v i e w PD Distance projector - screen R5976816 RL M R6+ PERFORMER 02/06/2006 13 ...

  • Barco R9010270 - page 18

    2. Installation G uidelines PD A B C PD Image 2-2 Front-T able c onfigura tion A Side view B T op view CB a c k v i e w PD Distance projector - screen 2.3 Lenses Overview • Lenses • Lens formulas • Lens installation • Cleaning the lens 2.3.1 Lense s A vailabl e lenses TLD HB lenses: Lenses Order num ber TLD HB (0.8) R9842040 TLD HB (1.6 - 2 ...

  • Barco R9010270 - page 19

    2. Installation Guidelines 2.3.2 Lens formulas Formulas For TLD HB lenses : Metric Formulas (mete r) Inch formulas (inch) TLD HB (0.8 : 1) PD = 0.77 x SW + 0.07 PD = 0.77 x SW + 2.76 TLD HB (1.6 - 2) Wide PD = 1.47 x SW - 0.07 PD = 1.47 x SW - 2.76 Te l e PD = 1.85 x SW - 0.1 1 PD = 1.85 x SW - 4.33 TLD HB (2 - 2.8) Wide PD = 1.85 x SW - 0.14 PD = ...

  • Barco R9010270 - page 20

    2. Installation G uidelines Image 2-3 2.3.4 Cleaning the len s T o minimize the possibility o f damage to optical coatings, or scratches to lens surfaces , we have developed recommendations for clean. FIRST , w e recommend you try to remove any m aterial from the lens by blowing it off with clean, dry deionized air. DO NOT use any liqu id to clean ...

  • Barco R9010270 - page 21

    2. Installation Guidelines Image 2-4 Battery cover unlock Image 2-5 Battery cover removal Image 2-6 Battery re moval 2.5 Stacking p rojectors What is possible? Up to 2 projectors can be stacked on each other without using extra tools or accessories. H ow to stack? Handle as follow: 1. Put the second projector on the first one so that base plate of ...

  • Barco R9010270 - page 22

    2. Installation G uidelines Image 2-7 Stacking two projectors Image 2-8 Closing the riggin g sockets Image 2-9 Mounting the securi ty chain 18 R5976816 R LM R6+ PERFORMER 02/06/2006 ...

  • Barco R9010270 - page 23

    2. Installation Guidelines 2.6 Rigging points and accessories 2.6.1 Overview Clamps Slots are made in the carry handle frame for easy inserting the overlockers and for easy adjusting the clamps position so that this position matches with the rigging p oints. Consult a professional structural engineer prior to suspe nding th e ceiling mount from a s ...

  • Barco R9010270 - page 24

    2. Installation G uidelines Image 2-10 Mounting the clamps fixation Image 2-1 1 Mounting the rigging clamp 20 R5976816 R LM R6+ PERFORMER 02/06/2006 ...

  • Barco R9010270 - page 25

    3. Connecti ons 3. CONNECTIONS Overview • Power connection • Input Source Connections • 5-Cable input • Composite Video Input • S-Video input • Digital Visual Interface (DVI) input • Computer input (RGB analog) • SDI or HDSDI input • Communication connection • Extended configuration 3.1 Power connection AC power (mains) cord con ...

  • Barco R9010270 - page 26

    3. Connecti ons 3.2 Input Source Connections Overview • Input section • Input facilities 3.2.1 Input section Input Layers The input section is divided in layers, each o f them regrouping several inputs, this architectu re allows the input section to be upgraded at any time with an optional analog or digital layer . 1. Layer 1: analog layer cont ...

  • Barco R9010270 - page 27

    3. Connecti ons L1 L2 L3 L4 TWO WAY HARDWIRED REMOTE 2 1 3 PUSH R/PR G/Y B/PB Hs/Cs Vs VIDEO (HD)SDI IN (HD)SDI OUT S-VIDEO R.C. 10 BASE-T DVI ANALOG RGB RS 232/422 IN POWER WIRELESS RECEIVER RS 232/422 OUT Image 3-2 Input facilities L1 Layer 1 = RGBHV + Composite Video + S-Video L2 Layer 2 = DVI + Computer + RS232IN + RC (wired remot e control) L3 ...

  • Barco R9010270 - page 28

    3. Connecti ons TWO WAY HARDWIRED REMOTE 2 1 3 PUSH R/PR G/Y B/PB Hs/Cs Vs VIDEO (HD)SDI IN (HD)SDI OUT S-VIDEO R.C. 10 BASE-T DVI ANALOG RGB RS 232/422 IN POWER WIRELESS RECEIVER RS 232/422 OUT Image 3-3 5-cable i nput Component Video In Component Video the term component describes a number (3) of elements that are needed to make up th e video pic ...

  • Barco R9010270 - page 29

    3. Connecti ons Component Video signals (PR/Y/PB) Some interfaces use progressive o utput signals with a double line frequency of 32 kHz. The video de coder used for the video signals is not appropriate fo r these signals since it can only handle 15 kHz signals. This signal ha s theref ore to be i nternal ly redi rected , this is don e in the Sourc ...

  • Barco R9010270 - page 30

    3. Connecti ons 3.5 S-Video input Input specificat ion TWO WAY HARDWIRED REMOTE 2 1 3 PUSH R/PR G/Y B/PB Hs/Cs Vs VIDEO (HD)SDI IN (HD)SDI OUT S-VIDEO R.C. 10 BASE-T DVI ANALOG RGB RS 232/422 IN POWER WIRELESS RECEIVER RS 232/422 OUT Image 3-5 S-Video indic ation Pin configurat ion 4 pin connecto r 4 3 1 2 Image 3-6 For S-Video For Video pin 1 : ea ...

  • Barco R9010270 - page 31

    3. Connecti ons Which signal can be connected ? Standard S-Video (S-VHS) with separate Y (luma) and C (chroma) signals. I ne x t e n d e dm o d ea l s oC o m p o s i t ev i d e oc a nb ec o n n e c t e dt ot h eS - V i d e op l u g . How to select the S-Vid eo input ? 1. Press 4 on the RCU Note: Another way for selecting this input is via Source on ...

  • Barco R9010270 - page 32

    3. Connecti ons TWO WAY HARDWIRED REMOTE 2 1 3 PUSH R/PR G/Y B/PB Hs/Cs Vs VIDEO (HD)SDI IN (HD)SDI OUT S-VIDEO R.C. 10 BASE-T DVI ANALOG RGB RS 232/422 IN POWER WIRELESS RECEIVER RS 232/422 OUT Image 3-7 DVI indication. DVI-I type connector analog li nk (4 pins at the right side of th e connector) not support ed. Pin assignment for the DVI connect ...

  • Barco R9010270 - page 33

    3. Connecti ons 3.7 Computer input (RGB analog) Input specificat ion TTL sync input : U min =2 . 0V RGB input = 0.7 V pp ±3 d B TWO WAY HARDWIRED REMOTE 2 1 3 PUSH R/PR G/Y B/PB Hs/Cs Vs VIDEO (HD)SDI IN (HD)SDI OUT S-VIDEO R.C. 10 BASE-T DVI ANALOG RGB RS 232/422 IN POWER WIRELESS RECEIVER RS 232/422 OUT Image 3-8 Analog inpu t What can be connec ...

  • Barco R9010270 - page 34

    3. Connecti ons Input specificat ions (HD)SDI input : BNC (HD)SDI output : BNC (= loop through) typical : 0.8 Vpp 75 Ω terminated output impedance: 75 Ω TWO WAY HARDWIRED REMOTE 2 1 3 PUSH R/PR G/Y B/PB Hs/Cs Vs VIDEO (HD)SDI IN (HD)SDI OUT S-VIDEO R.C. 10 BASE-T DVI ANALOG RGB RS 232/422 IN POWER WIRELESS RECEIVER RS 232/422 OUT Image 3-9 (HD) ...

  • Barco R9010270 - page 35

    3. Connecti ons TWO WAY HARDWIRED REMOTE 2 1 3 PUSH R/PR G/Y B/PB Hs/Cs Vs VIDEO (HD)SDI IN (HD)SDI OUT S-VIDEO R.C. 10 BASE-T DVI ANALOG RGB RS 232/422 IN POWER WIRELESS RECEIVER RS 232/422 OUT (a) (b) Image 3- 10 Applicati ons of the RS232/422 connect ion Remote control: • easy adjustment of projector via IBM P C (or compatible) or MAC connecti ...

  • Barco R9010270 - page 36

    3. Connecti ons TWO WAY HARDWIRED REMOTE 2 1 3 PUSH R/PR G/Y B/PB Hs/Cs Vs VIDEO (HD)SDI IN (HD)SDI OUT S-VIDEO R.C. 10 BASE-T DVI ANALOG RGB RS 232/422 IN POWER WIRELESS RECEIVER RS 232/422 OUT Image 3-1 1 Wireless receiver connectio n 3.10 Extended configuration Overview • Introduction • 5-cable extended configuration • S-Video extended con ...

  • Barco R9010270 - page 37

    3. Connecti ons Inputs R G B H V VID EO RGBHV R G B H V - RG S B R G S B - - - RGBS R G B S - - Component PR Y PB - - - S-Video - - - - C Y S-Video C - Y - - - Composite VIDEO ---- - Composite - VIDEO - - - - Composite - - VIDEO - - - Composite - - - - VIDEO Signals Composite - ---- VIDEO T able 3-4 Extended configur ation of the 5-ca ble input: th ...

  • Barco R9010270 - page 38

    3. Connecti ons How to set up the S-Video extende d configuration ? 1. Connect the video sources to the desired connector (image 3-15) Note: An adapter cable is required Chroma Luma Video Y R/PR G/Y B/PB Hs/Cs Vs VIDEO S-VIDEO Video C Image 3- 15 Connecting 2 composi te Video sign als to the S-Vi deo connector Multiple video signa ls can not be vis ...

  • Barco R9010270 - page 39

    4. Getting Sta rted 4. GETTING ST ARTED Overview • T erminology overview • Switching on • Lamp runtime • Switching to standby • Switching off • T emperature error DMD •U s i n g t h e R C U • Projector address • Controlling the projector • Quick lens adjustment • Digital Zoom • Quick Picture in Pict ure selection 4.1 T ermin ...

  • Barco R9010270 - page 40

    4. Getti ng Started F1 F2 F3 MENU BACK ENTER PAUSE PIP PHASE TINT COLOR BRIGHTN CONTR VOL 9 0 7 8 5 6 3 4 1 2 LOGO AUTO IMAGE DIGI ZOOM SDI SB-PC DVI VIDEO S-VIDEO RGB PC LENS ZOOM LENS SHIFT LENS FOCUS TEXT 1 21 19 2 3 4 5 6 7 8 9 10 11 12 13 16 14 15 18 20 17 Image 4-1 No. Key name Description 1 Function keys user programmable keys with funct ion ...

  • Barco R9010270 - page 41

    4. Getting Sta rted No. Key name Description 10 Lens control use these buttons to obtain the de sired ZOOM, SHIFT , FOCUS. 11 VOL Used as lens shift left - right. 12 Picture controls use these buttons to obtain the desired picture analog level. 13 DIGI ZOOM allows a digital Zoom of a part of the image 14 FREEZE press to freeze the projected image. ...

  • Barco R9010270 - page 42

    4. Getti ng Started 4.3 Lamp runtime x T o generalize for the different projector types, x refers here to the maximum run time of the lamp. The maximum run time is given in the specifications. Lamp runtime indicati on while running Independently of the lamp mode, when the total runtime of an active l amp (lamp 1 for example) is (x -30) hours or mor ...

  • Barco R9010270 - page 43

    4. Getting Sta rted Switching t o Standby . When the proj ector is r unning an d you want to go to standby , press the st andby key f or 2 seconds until the mess age ’Saving data, please wait’ is displayed. Do no t press any longer on the standby key otherwise the projector will restart. 4.5 Sw itchi ng off How to swi tch off the projecto r? 1. ...

  • Barco R9010270 - page 44

    4. Getting Started Hardwired Remote i nput 1. Plug one end of the remote cable in the connector on the bottom of the RCU. (image 4-5) 2. Plug the other end in the connector in the front panel of the projector labell ed RC. Specifications of the RC input -U in =9 V -I max =8 0m A • Internal IR receivers can be disabled: o mono jack : on plug in of ...

  • Barco R9010270 - page 45

    4. Getting Sta rted F 1 F 2 F 3 F 4 F 5 A D J E X I T E N T E R P A U S E P H A S E T E X T S H A R P N T I N T C O L O R B R I G H T N C O N T R T R E B L E B A L A N C E B A S S V O L 9 0 7 8 5 6 3 4 1 2 45° 45 ° F 1 F 2 F 3 F 4 F 5 A D J E X I T E N T E R P A U S E P H A S E T E X T S H A R P N T I N T C O L O R B R I G H T N C O N T R T R E B ...

  • Barco R9010270 - page 46

    4. Getting Started Common address Default address. Projector will always execute the command coming from a RCU p rogrammed with that common address. Why a projector address ? As more than one projector can be installed in a room, the separ ate project or should be separately addressable with an RCU or computer . Therefo r each projector has its own ...

  • Barco R9010270 - page 47

    4. Getting Sta rted Input Selection with alt ernative custom file (s lot extension) It is possible to select the same i nput but with another settings (another custom file wil l be loaded). H o w t od oi t: 1. Press first 0 on the RCU. The Slot extension menu will be displayed. 2. Enter the two digits. First digit is custom file sequence and the se ...

  • Barco R9010270 - page 48

    4. Getting Started T o restart the image pro jection: •P r e s s P AUSE key 4.10 Quick lens adjustment Overview • Lens Adjustment via Control Buttons on Projector • Lens Adjustment via Menu Bar • Direct Lens Adjustment (RCU) 4.10.1 Lens Adjustment via Control Buttons on Projector How to enter the adjustment menu. 1. Press the control bu tto ...

  • Barco R9010270 - page 49

    4. Getting Sta rted 6. Press control button (D) to leave the lens adjustment menu. A2 D A A1 1 2 ...... Installation ...... Lens adjustment Projector address ...... Lens adjustment Use ↑ and ↓ for zoom Use ← and → for focus Press <enter> for SHIFT mode Press <LOGO> or <LENS> for test patter n Lens adjustment Use ↑ and ? ...

  • Barco R9010270 - page 50

    4. Getting Started How to zoom ? 1. Press ← or → on the Digital Zoom key on the remote control to zoom the center of the image. 2. Use the ↑ , ↓ , → or ← to pan the image. (image 4-15) 3. Press ENTER to confirm. Note: While in the digital zoom function, use BACK to retur n. A B C D Image 4- 15 Digital zoom A Normal image B Digital zoom ...

  • Barco R9010270 - page 51

    5. Getting used with the menu str ucture 5. GETTING USED WITH THE MENU STRUCTURE Overview • How to start up the menus • Using the menu • Using the Dialog boxes • Using the menus via the built-in LCD panel 5.1 How to start up the menus PC like menu structu re The RLM R6+ Performer has a build in “PC like” menu bar which a llows easy acce ...

  • Barco R9010270 - page 52

    5. Getting used with the menu structure How to pull down a menu ? 1. Use ↓ to pull down a menu. How to pull down a submenu ? 1. Use → to pull down a subm enu. How to exit the submenu ? 1. Press BACK to exit a submenu. Press MENU to exit the menu 5.3 Using the Dialog boxes How to use the dia log boxes ? Some parameters are modified by means of a ...

  • Barco R9010270 - page 53

    5. Getting used with the menu str ucture In some cases an alphanu meric value (file name, ...) has to be entere d. Use ↑ or ↓ to scroll throu gh the cha r- acter values o nce the input field is activated. Following cha racters can be browsed in this particular order: Decimal scroll list: 0123456789 Signed decimal scroll list: 0123456789- ASCII ...

  • Barco R9010270 - page 54

    5. Getting used with the menu structure 50 R5976816 R LM R6+ PERFORMER 02/06/2006 ...

  • Barco R9010270 - page 55

    6. Source selecti on 6. SOURCE SELECTION Overview • S ource Select ion overview • The use of icons • S ource selecti on • Selecting a data source on the 5-cable input • Composite Video • S-Video s election • The Video Selector 6.1 Source Selectio n overview Source selection overvi ew •D a t a o n B N C ’ s • Component Video • ...

  • Barco R9010270 - page 56

    6. Source select ion 3. Use ↑ or ↓ to select one of the different sources (Press → to pull down if the item has a submenu). 4. Press ENTER to conf irm your choice. On the screen appears now the selected source with at the same time for a few seconds a te xt box with source information. (image 6-1) Video source 1 Video Video625.c06 Image 6-1 S ...

  • Barco R9010270 - page 57

    6. Source selecti on 6.5 Composite Video Possible connect ions In normal mode, one video source can be con nected to the video input. In extended mode, up to 7 different video sources can be connected to the normal video input, or to the extended 5-cable input or to the S-Video. When the extended mode is not switch ed on, the on screen menu will h ...

  • Barco R9010270 - page 58

    6. Source select ion 2. Press ↓ to pull down the Source Selection menu. 3. Use ↑ or ↓ to select S-Video . 4. Press → to pull down the submenu. 5. Use ↑ or ↓ to select one of the different S-V ideo inputs. (image 6-4) 6. Press ENTER to conf irm your choice. A white bullet indicates the selected S-Video source. This source will be display ...

  • Barco R9010270 - page 59

    6. Source selecti on Image 6-5 How to select an input on the V ideo Select or 1. Use ← or → to browse throug h the diff erent inputs. 2. Press ENTER to selec t. Use MENU or BACK to exit the Video Selector . Graphical interf ace B C D E A A B C D E Image 6-6 A BNC or S-Video connector on the video selector can be in one of following conditions: ...

  • Barco R9010270 - page 60

    6. Source select ion 56 R5976816 R LM R6+ PERFORMER 02/06/2006 ...

  • Barco R9010270 - page 61

    7. General Menu 7. GENERAL M ENU Overview • General Menu overview • Pause • Freeze • Standby Timer • Identification 7.1 General Menu overview General M enu structure • Pause • Freeze • Standby timer ... • Identification 7.2 Pause Interrupting the imag e projection With the Pause function, the image projection can be stopped, the p ...

  • Barco R9010270 - page 62

    7. General Menu H o wt of r e e z et h ei m a g e? 1. Press MENU to activate the menu bar. 2. Press → to select General . 3. Press ↓ to pull down the G eneral menu. 4. Use ↑ or ↓ to select Freeze . (image 7-2) 5. Press ENTER to activate the F reeze function. Image 7-2 The image can also be frozen using the FREEZ E key on the RCU. 7.4 Stand ...

  • Barco R9010270 - page 63

    7. General Menu Image 7-4 Image 7-5 7.5 Identification The projector’s id entification sc reen The identifi cation screen displays the projector ’s main characteristics These are: •P r o j e c t o r t y pe • Projector address • Software version controller unit • RS232 Baudrate • Serial number of projector How to display th e identifi ...

  • Barco R9010270 - page 64

    7. General Menu Image 7-7 60 R5976816 R LM R6+ PERFORMER 02/06/2006 ...

  • Barco R9010270 - page 65

    8. Im age Menu 8. IMAGE MENU Overview • Image menu overview • Settings • Aspect ratio • Show native resolution • Keystone correction • Color T emperature • Color space • Filmmode detection •B l a n k i n g • Input Balance • AGC on Video • Manual Gain Control R5976816 RL M R6+ PERFORMER 02/06/2006 61 ...

  • Barco R9010270 - page 66

    8. Image Menu 8.1 Image menu overview Overview • Settings - Contrast - Brightness -C o l o r -T i n t - Sharpness - Gamma -P h a s e - Noise Reduction • Aspect ratio -A u t o - [4:3] - [16:9] - [5:4] - [2.35] - [2.88] - [1.78] -C u s t o m • Show native resolution -O n -O f f • Keystone... • Color temperature - Projector white - Computer ...

  • Barco R9010270 - page 67

    8. Im age Menu 8.2 Settings Overview • Contrast • Brightness • Color • T int (hue) • Sharpness • Gamma • Phase • Noise reduction What can be done? Correct image settings are impor tant for a good image reproduction. The image settings are made through a dialog box with a scroll bar . Minimal, maximal and the actual values are indica ...

  • Barco R9010270 - page 68

    8. Image Menu 8. Use ← or → to change the contras t. The higher the value, the higher the c ontrast. Or , click in the input box and enter the desired value with the numeric keys. Image 8-3 8.2.2 Brightne ss About Brightnes s The Brightness function is used to adjust the overall light output. How to change the Bri ghtness ? 1. Press MENU to act ...

  • Barco R9010270 - page 69

    8. Im age Menu 8.2.3 Color About Color set ting The color function is used to adjust color saturation levels. How to change t he Color ? 1. Press MENU to activate the menu bar . (image 8-5) 2. Press → to selec t the Image item. 3. Press ↓ to pull down th e Image menu. 4. Use ↑ or ↓ to select se ttings . 5. Press → to pull down the menu. 6 ...

  • Barco R9010270 - page 70

    8. Image Menu Image 8-6 8.2.5 Sharpness About Sharpness The sharpness function is used to adjust the image sharpness of video signals. How to change the sha rpness ? 1. Press MENU to activate the menu bar . (image 8-7) 2. Press → to selec t the Image item. 3. Press ↓ to pull down th e Image menu. 4. Use ↑ or ↓ to select se ttings . 5. Press ...

  • Barco R9010270 - page 71

    8. Im age Menu 8.2.6 Gamma About Gamma Gamma is an image quality enhancement function that offers a riche r image by brightening the already darker portions of the image without altering the brightness of the brighter portions (contrast feeli ng enhanced). How to change the Gamma 1. Press MENU to activate the menu bar . (image 8-8) 2. Press → to ...

  • Barco R9010270 - page 72

    8. Image Menu How to change the Phase ? 1. Press MENU to activate the menu bar . (image 8-10) 2. Press → to selec t the Image item. 3. Press ↓ to pull down th e Image menu. 4. Use ↑ or ↓ to select se ttings . 5. Press → to pull down the menu. 6. Use ↓ or ↑ to se lect Phase . 7. Press ENTER . A slider box appears. 8. Use ← or → to ...

  • Barco R9010270 - page 73

    8. Im age Menu Image 8-1 1 8.3 Aspect ratio Aspect ratio is greyed ou t when the Full Screen Represe ntation funct ion in Display Setup is switched ON or when the Show Native Resolution function in Image is switched ON. What can be done ? The aspect ratio setting forces the projector to project an image using a defined aspect ratio Aspect ratio Des ...

  • Barco R9010270 - page 74

    8. Image Menu 4/3 5/4 16/9 Auto Video Signal Pal/Secam Video Signal NTSC Video Signal 16/9 RGB Signal Image 8 -12 Some examples for aspect ratio How to change th e Aspect rati o ? 1. Press MENU to activate the menu bar . (image 8-13) 2. Press → to select Im age . 3. Press ↓ to pull down th e Image menu. 4. Use ↑ or ↓ to select Asp ect ratio ...

  • Barco R9010270 - page 75

    8. Im age Menu Image 8- 13 How to set up a custom Aspect rat io ? 1. Press MENU to activate the menu bar . (image 8-14) 2. Press → to select Im age . 3. Press ↓ to pull down th e Image menu. 4. Use ↑ or ↓ to select Asp ect ratio . 5. Press ↓ to select custom... . 6. Press ENTER to confirm. The Custom aspect ratio dialog box will be displa ...

  • Barco R9010270 - page 76

    8. Image Menu Image 8-15 8.4 Show native resolu tion Show native resolu tion overrules the Full Screen Representatio n function in Display Setup . Show native resolutio n is greyed out for video signals. DMD Digital Micromirror Device What can be done The aim here is to always show the r esolution of the source independently of the resolution of th ...

  • Barco R9010270 - page 77

    8. Im age Menu Source Projected image SXGA 5:4 1280x1024 5:4 1280x1024 image projected with black borders SXGA+ 4:3 1400x1050 4:3 1400x1050 normal image projected UXGA 4:3 1600x1200 4:3 1600x1200 part of the image disp layed, image scroll possible How to enable the “Show native res olution” functio n? 1. Press MENU to activate the menu bar. 2. ...

  • Barco R9010270 - page 78

    8. Image Menu Image 8- 18 Keystone adjustment A T op adjustment of the keystone B Bottom adjustment of the keystone How to perform a Keysto ne correcti on ? 1. Press MENU to activate the menu bar. 2. Press → to select Im age . 3. Press ↓ to pull down th e Image menu. 4. Use ↑ or ↓ to select Keystone . ( image 8-19) 5. Press ENTER to confirm ...

  • Barco R9010270 - page 79

    8. Im age Menu There are 6 different preset color temperatures: • Projector white • computer : 9300 K • Video : 6500 K • Film : 5400 K • Broadcast : 3200 K • Custom Preset value The first 5 calibrated presets can be selected and will provide optimum color tracking, the projector allows however the setting of a personal preset color temp ...

  • Barco R9010270 - page 80

    8. Image Menu 7. Press ENTER to confirm. A slider box for the x-coordinate is displayed as well as a wizard text box in the lower part of the screen. (image 8-23) Adjust first x and the n y .U s e Color button to toggle between x and y . (image 8-24) The color temperature value will be stored for later use. Image 8-22 x 200 0 1000 Image 8-23 Change ...

  • Barco R9010270 - page 81

    8. Im age Menu Image 8-25 x 200 0 1000 Image 8-26 Change between x and y w ith <COLOR> Image 8-27 the x and y coordinate change s between 0.00 and 1.00. F or practical reasons, the values on the slider box are multiplied by 1000. 8.7 C olor space Color space A color space is a mathematical representation for a c olor . For example, the RG B c ...

  • Barco R9010270 - page 82

    8. Image Menu EBU European Broadcasting Union. This organization defines a European standard. ANSI American standard. Projector Maximum color space Custom Preset User defined x and y coordinates for red, green and blue which fo rms the corners of the color space. These values can be recalled at anytime. Custom The user can define the x and y coord ...

  • Barco R9010270 - page 83

    8. Im age Menu Image 8-29 Red x 200 0 1000 Image 8-30 the x and y coordinate change s between 0.00 and 1.00. F or practical reasons, the values on the slider box are multiplied by 1000. How to change the custom color space ? 1. Press ME NU to activate the menu bar. 2. Press → to selec t the Image item. (image 8-31) 3. Press ↓ to pull down th e ...

  • Barco R9010270 - page 84

    8. Image Menu Image 8-31 Red x 200 0 1000 Image 8-32 the x and y coordinate change s between 0.00 and 1.00. F or practical reasons, the values on the slider box are multiplied by 1000. 8.8 Filmmode detection What can be done ? Some sources like common DVD material are derived from cinema 24 Hz sources ( 2/2 or 3/2 pull down method). The filmmode de ...

  • Barco R9010270 - page 85

    8. Im age Menu Enabling/disabl ing the fil mmode detection 1. Press MENU to activate the menu bar. 2. Press → to selec t the Image item. (image 8-33) 3. Press ↓ to pull down th e Image menu. 4. Use ↑ or ↓ to select Filmmode detection. 5. Press → to pull down the menu. 6. Use ↓ or ↑ to enable or disable the Film mode detection. 7. Pres ...

  • Barco R9010270 - page 86

    8. Image Menu Image 8- 34 Blanking A T op blanking B Bottom blanking C Left blanking D Right blanking Adjusting t he blanking 1. Press MENU to activate the menu bar. 2. Press → to selec t the Image item. (image 8-35) 3. Press ↓ to pull down th e Image menu. 4. Use ↑ or ↓ to select Blanking . 5. Press ENTER to confirm. The Blanking pop-up me ...

  • Barco R9010270 - page 87

    8. Im age Menu Image 8-35 Image 8-36 Image 8-37 8.10 Input Balance Overview • Introduction to Input Balan ce • Adjusting the input balance • Input balance for YPrPb signals 8.10.1 Introduction t o Input Balance Introduction: Unbalanced color si gnals When transporting signals, there is always a risk of dete rioration of the information contai ...

  • Barco R9010270 - page 88

    8. Image Menu B Black level 0.7V Image 8-38 Black level ∆ G ∆Β ∆ R R G B Image 8-39 One can concl ude he re that a good color tracking can only be met by using three previou sly (input) balanced color signals Analog Digital Conve rsion The analog co lor signals must pass through an Analog/Digital conversion circuit prior to any digital proce ...

  • Barco R9010270 - page 89

    8. Im age Menu 8.10.2 Adjusting the i nput balance How can it be done ? T o balance the three color signals of a particular source there are conditions; in fact we must know the black and the white level of the source i.e. : 1. The source in question must be able to generate a white signal, ideally a 100% white (background) full screen pattern 2. T ...

  • Barco R9010270 - page 90

    8. Image Menu 1 1. Adjust the Red black level until bright spots appear on the screen. The projected image should now be noisy full black Image 8-43 Input black balance Red 20 0 127 Image 8-44 Change color between Red Green and Blue with <COLOR> Image 8-45 If one us es a gray scale pattern, the bright spots should ap pear in the black bar . P ...

  • Barco R9010270 - page 91

    8. Im age Menu Image 8-46 Input white balance Red 50 0 127 Image 8-47 If one uses a gray scale pattern, the brigh t spots should appear in the white bar . Selecting Preset restores t he factor y input bal ance sett ing 8.10.3 Input balance for YPrPb si gnals Remark on the input balance of a component vi deo source Before starting the Inp ut Balance ...

  • Barco R9010270 - page 92

    8. Image Menu • The white balance happens only on Green. Adjust until bright spots appear in the image. Image 8-48 • The black balance happens on the three colors. The PR and PB connector have to be removed from the input. Adjust until noise appears in the image. Image 8-49 8.1 1 AGC on Video AGC Automatic Gain Control: allows an automatic ampl ...

  • Barco R9010270 - page 93

    8. Im age Menu Image 8- 50 The AGC can be disturbing in cas e of Macrovision encoded signals, therefore the AGC can be disabled (OF F) at any time 8.12 Manual Gain Control What can be done ? When AGC on Video is disabled, the gain of the incoming video signal can be set manually . The manual gain control must be done on an external pattern with whi ...

  • Barco R9010270 - page 94

    8. Image Menu Image 8-52 90 R5976816 R LM R6+ PERFORMER 02/06/2006 ...

  • Barco R9010270 - page 95

    9. Tools M enu 9. T OOLS MENU Overview • Overview of the T o ols menu • Introduction to PiP • PiP se lect • PiP add window • P iP remove wi ndow • PiP layo ut •P i P A d j u s t 9.1 Overview of th e T ools menu Overview • PiP se lect - Full-screen -2 b y 2 r a s t e r - PiP layout 1 - PiP layout 2 - PiP layout 3 • PiP add window . ...

  • Barco R9010270 - page 96

    9. Tools Menu The different PiP configurat ions • Full screen 2 The full screen is used to display one of the selected sources. Browse through the sources with the PiP Adjust button on the remote control. •2 - b y - 2 r a s t e r 2 The screen is divided into 4 subscreens cont aining 1 V ideo, 2 Data sources and 1 SD I source. Image 9-1 • P i ...

  • Barco R9010270 - page 97

    9. Tools M enu PiP dedicated buttons • PiP Adjust : this button allows to focus on one particular window, this window is shown with a white frame surrounding the selected window . A source identification box is displayed in the right lower corner . Image 9-2 Press PiP Adjust button to move the frame to the next window . This can also be done via ...

  • Barco R9010270 - page 98

    9. Tools Menu Image 9-3 9.4 PiP ad d window What can be done ? It is possible to add a window to the existing windows (maximum 4), therefore a source must be sel ected. Sources which are already used are not selectable. If for instance the PiP layout contains a component video then component video will be not selectable. Once added, the window may ...

  • Barco R9010270 - page 99

    9. Tools M enu 9. Change the viewing order of the displayed images (z-order) with the ↑ and ↓ . (image 9-10) Image 9-5 Source selection Data on BNC's Video selector SDI DVI PC Image 9-6 Pip Wizard step 1 : Select the source you want to display in the w indow... Image 9-7 Pip Wizard step 2 : Resize this new window w ith ↑↓ ←→ Image ...

  • Barco R9010270 - page 100

    9. Tools Menu Image 9-1 1 Select window with <PiP ADJUST> → Press <ENTER> to rem ove Image 9-12 9.6 PiP layout Overview •P i P S a v e • PiP rename layout • PiP de lete layout 9.6.1 PiP Save What can be done ? The active layout can be saved or "saved as". When a new layout is saved it is added to the PiP select menu. A ...

  • Barco R9010270 - page 101

    9. Tools M enu Image 9-13 Save PiP layout Layout name: Full-screen Image 9-14 Message Current layout has been saved Press <ENTER> or <EXIT> to return Image 9-15 9.6.2 PiP rename layo ut What can be done ? T h en o nf i x e dl a y outs (factory and personal layouts) can be renamed . The maximal length of the name is 12 characters. A fixe ...

  • Barco R9010270 - page 102

    9. Tools Menu Rename PiP layout PIP Layout 1 PIP Layout 2 PiP Layout 3 Own layout 1 Own layout 2 Image 9-17 Rename PiP layout New name: Own layout 1 Image 9-18 9.6.3 PiP delete layout What can be done ? The non fixed layouts (factory and personal layou ts) can be deleted. The fixed layouts and the active layout can not be deleted How to delete a la ...

  • Barco R9010270 - page 103

    9. Tools M enu This can also be d one by using the dedicated PiP Adju st key on the RCU Image 9- 20 PiP adjust i n case of 2-by-2 layou t A Data1 window has the focus, new settings will only affect Data1 window B Video1 window has the focus, new settings will only affect Video1 window PiP adjust 1. Press MENU to activate the menu bar. 2. Press → ...

  • Barco R9010270 - page 104

    9. Tools Menu 100 R5976816 R LM R6+ PERFORMER 02/06/2006 ...

  • Barco R9010270 - page 105

    10. Signal menu 10. SIGNAL MENU Overview • Overview of the Signal menu • Switching mode • Output Frame rate • Background 10.1 Overview of the Signal menu Overview • Switching mode -S e a m l e s s -B o x i n - Box out - Shift in left - Shift in right - Shift in top - Shift in bottom - V ertical curtain open - V ertical curtain close - Hor ...

  • Barco R9010270 - page 106

    10. Signal menu Image 10-1 The Random mode will select a new sw itching mode at each source switching i.e. there will never be 2 suc- cessive source sw itchings with the same effe ct. The Seamless switching m ode is not used in th e Random mode. Note on Fade in/out In some cases, depending on the sources to be switched, the fad e in/out ef fect is ...

  • Barco R9010270 - page 107

    10. Signal menu Image 10-2 * Video may be Composite video/ S-Video / SDI • dark arrow : fade in/out effect possible • dotted arrow : u ndetermined case, fade in/out ef fect may take place or not • striked out arrow : fade effect impossible The switching effects are o nly possible in the full screen mode 10.3 Output Frame rate What can be done ...

  • Barco R9010270 - page 108

    10. Signal menu 4. Use ↑ or ↓ to select O utput frame rate. 5. Press → to pull down the menu. 6. Use ↑ or ↓ to select the desired frame rate. The following choices are possible: - synchronous : the output follows the input frame rate. - 50 Hz : output is always displayed with a frame rate of 50 Hz - 60 Hz : output is always displayed with ...

  • Barco R9010270 - page 109

    11. Lam ps Menu 1 1. LAMPS MENU Overview • Overview of the Lamps m enu • Runtimes • Mode • Economic ON/OFF • Runtime warning 1 1.1 Overview of the Lamps menu Overview • Runtimes... • Mode - Single... - Dual... • Economic • Runtime warning 11 . 2 R u n t i m e s How to display the lamp runti mes ? 1. Press MENU to activate the menu ...

  • Barco R9010270 - page 110

    11. Lamps Menu 1 1.3 Mode Single lamp mode The projector will always switch to the lamp with the shortest r untime when the difference between the runtimes of lamp 1 and lamp 2 reaches 100 hours , switching from one lamp to another happe ns only at switching on of the projector and not during operation. When the lamp fails or reaches its maximum r ...

  • Barco R9010270 - page 111

    11. Lam ps Menu Image 1 1-4 When switching from th e dual mode to the single mode the lamp with the longest runtime is switched off. If the runtimes are equal (if the projecto r has always been operated in dual mode) then lamp 1 is switched out. When switching to singl e mode, returning to the dual mode will not be possible in the first 60 seconds, ...

  • Barco R9010270 - page 112

    11. Lamps Menu 4. Use ↑ or ↓ to select Runtime warning. 5. Press ENTER to confirm. A dialog box is displayed. (image 1 1-7) 6. Press ENTER to activate the inpu t field. 7. Use ← or → to change the runtime warning setting. Or , enter the desired value with the digit keys on the remote control. 8. Press Back to return. Image 1 1-6 Lamp runtim ...

  • Barco R9010270 - page 113

    12. Image File s Menu 12. IMAGE FILES MENU Overview • Overview of the Image Files Menu • Introduction to image files • Load file • File selection • Auto Image • Edit file • Rename file • Copy • Delete • Automatic load • Zoom-Focus 12.1 Overview of the Image Files Menu Overview • Load • File selection -F i t -A l l • Auto ...

  • Barco R9010270 - page 114

    12. Image File s Menu Possible file mani pulations The possible file manipulations are : • Load : insta llation of a file for a new source • Edit : editing a loaded file to match the source specifications • Rename : renaming a file • C o p y: c o p y i n gaf i l et oan e w f i l e • Delete : deleting an existing file 12.3 Load f ile H o w ...

  • Barco R9010270 - page 115

    12. Image File s Menu What to do if the image is not pe rfect ? If the displayed image is not correct after AutoImage or after selecti ng the best fitting file, go to the Edit menu, select the active file and change the settings. 12.4 File sele ction How to se t the filter ? 1. Press MENU to activate the menu bar. 2. Press → to select th e Image ...

  • Barco R9010270 - page 116

    12. Image File s Menu Image 12-4 The Auto Image s etup in the Display setup menu affect only Auto Image if it is launched via th e RCU key or at automatic file creation. Launching Au toImage via the menu involves com plete checking of all parameters. Auto Image can a lso be launched via the RCU with the dedicated Auto Image key . 12.6 Ed it file Ov ...

  • Barco R9010270 - page 117

    12. Image File s Menu Image 12-5 Edit custom file Video625.c01 Video625.c02 Active files: Video625.c01 Image 12-6 Edit custom file Name Horizontal: Vertical: 680 20 0 560 8 576 720 Advanced Video625.c01 total active start period total active start Image 12-7 It is recommended to use the d efault values. 12.6.2 Correct fi le parameters What is alrea ...

  • Barco R9010270 - page 118

    12. Image File s Menu Advanced edit Comb filter On Off AGC hold interval Short Long Sync locking Slow Fast Sharpness Coarse Fine Image 12-8 video signal video signal frame blanking HI egalisation Image 12-9 HI AGC Hold interval The Comb filter is by default en abled. The AGC hold interval is t he time interval in which the AGC is inhibited (AGC hol ...

  • Barco R9010270 - page 119

    12. Image File s Menu • a progressive signal (32 kHz frequency video signal ) is connected to the BNC’ s (select the source with Data on BNC’s in the Source selection menu). • one wants (in PiP mode) to visualize the comp onent video signal in a Data window hereby adding a video image in the PiP layout. -HDTV-PR/Y/PB for high definition com ...

  • Barco R9010270 - page 120

    12. Image File s Menu 12.8 Copy How to copy a file ? 1. Press MENU to activate the menu bar. 2. Press → to select the Image files item. (imag e 12-15) 3. Press ↓ to pull down the Imag e files menu. 4. Use ↑ or ↓ to select copy . 5. Press ENTER to confirm. A dialog box is displayed. (image 1 2-16) 6. Use ↑ or ↓ to select the desired file ...

  • Barco R9010270 - page 121

    12. Image File s Menu How to delete a fi le ? 1. Press MENU to activate the menu bar. 2. Press → to select the Image files item. (imag e 12-18) 3. Press ↓ to pull down the Imag e files menu. 4. Use ↑ or ↓ to se lect del ete. 5. Press ENTER to confirm. A dialog box is displayed. (image 1 2-19) 6. Use ↑ or ↓ to select the desired file. 7. ...

  • Barco R9010270 - page 122

    12. Image File s Menu On The projector will switch the file when the source settings ch ange. Off The projector stays on its active file even w hen the settings of the source change. Image 12-20 12.1 1 Zoom-Focus What can be done ? As the projector is equipped with TLD lenses, it is possible to store the zoom and focus s etting for each fil e separ ...

  • Barco R9010270 - page 123

    13. Display Se tup 13. DISPLA Y SETUP Overview • Startup screen •T e x t B o x • Menu bar position • Status bar position • Sliderbox position • Auto Image Setup • Scenergix 13.1 Startup screen What can be done ? When the startup scre en is enabled, the identification screen is displayed for a few seconds at startup. This startup scree ...

  • Barco R9010270 - page 124

    13. Display Setup 3. Press ↓ to pull down the Display setup menu. 4. Use ↑ or ↓ to select T extbox . 5. Press → to pull down the menu. 6. Use ↓ or ↑ to enable/disable the textbox. 7. Press ENTER . Image 13-2 T o enable the menus and dial og boxes again, press the TEXT button on the RCU. 13.3 Menu bar position What can be done ? The menu ...

  • Barco R9010270 - page 125

    13. Display Se tup Image 13-4 13.4 Status ba r position What can be done ? The status bar (wizard menu) can be centere d vertically . The range is from the bottom of the screen to the m iddle of the screen. Image 13-5 Status bar positio n This is useful in applications where the bottom image content is not displayed (e.g. due to blanking). How to c ...

  • Barco R9010270 - page 126

    13. Display Setup 13.5 Sliderbox position What can be done ? The sliderbox can be displayed anywhere on the screen. The exact location can be set in sl iderbox menu due to the coarse and fine adj ustment. How to reposit ion the slider box? 1. Press MENU to activate the menu bar. 2. Press → to select the Display se tup item. (image 13-7) 3. Press ...

  • Barco R9010270 - page 127

    13. Display Se tup How to set up Auto Image? 1. Press MENU to activate the menu bar. 2. Press → to select the Display se tup item. (image 13-9) 3. Press ↓ to pull down the Display setup menu. 4. Use ↑ or ↓ to select Auto Im age setup . 5. Press ENTER to confirm. A dialog box is displayed. (image 1 3-10) 6. Use the arrow k eys to select the ...

  • Barco R9010270 - page 128

    13. Display Setup 13.7 Scenergix Overview • Introduction • Preparations • ScenergiX overlap zone (horizontal scenergix) • ScenergiX overlap zone (vertical sce nergix) • ScenergiX border adjustment • Black level of the images 13.7.1 Introduct ion Why Sce nergiX ? When working in a multichannel setup the RLM R6+ Performer and its So ft Ed ...

  • Barco R9010270 - page 129

    13. Display Se tup 13.7.3 ScenergiX overlap zone (horizont al scenergix) Definiti ons Image 13-14 Scenergix set up Overlap : number of pixels that overlap Horizontal resolution of 1 projector : 1024 for Graphics versions, 12 80 for Reality versions, 1400 for SXGA p rojectors. T otal horizontal screen resolution : [ (horizont al resolution of 1 proj ...

  • Barco R9010270 - page 130

    13. Display Setup 13.7.4 ScenergiX overlap zone (ve rtical scenergi x) Definiti ons Image 13-15 Scenergix overl ap zone vertical Overlap : number of pixels that overlap V ertical resolution of 1 projector : 768 for Gra phics versions, 1024 for Reality versions, 1050 for SXGA projectors. T otal vertical screen resolution : [ (V ertical resolution of ...

  • Barco R9010270 - page 131

    13. Display Se tup 3. Press ↓ to pull down the Display setup menu. 4. Use ↑ or ↓ to select Scene rgiX . 5. Press → to select the ScenergiX item. 6. Use ↑ or ↓ to select Border . 7. Press ENTER to selec t. A dialog box will be displayed. The actual scenergix border will be displayed. 8. Use ↑ or ↓ to select the desired adjustment. Im ...

  • Barco R9010270 - page 132

    13. Display Setup Image 13- 18 Width set up for projector 1 Image 13- 19 Width set up for projector 2 Adjusting by ent ering the exact va lues. 1. When on an adjustable item, th e input box background will be colored. Press ENTER . The value will change to a 3 digit value and the first digit is selected. 2. Enter a value with the digit keys on the ...

  • Barco R9010270 - page 133

    13. Display Se tup 2. Press → to select the Display setup item. (image 13-20) 3. Press ↓ to pull down the Display setup menu. 4. Use ↑ or ↓ to select Scene rgiX . 5. Press → to select the ScenergiX item. 6. Use ↑ or ↓ to sele ct Black level . 7. Press ENTER to selec t. A dialog box will be displayed on a black level background. Adjust ...

  • Barco R9010270 - page 134

    13. Display Setup 130 R5976816 R LM R6+ PERFORMER 02/06/2006 ...

  • Barco R9010270 - page 135

    14. Installation menu 14. INST ALLA TION MENU Overview • Lens adjustments • Projector address • Orientation • Language • Q uick access keys • RS baudrate • RS mode • Automatic startup • Security 14.1 Lens adjustments What can be done ? Motorized lenses can be adjusted in the installation menu or via t he dedicated keys on the remo ...

  • Barco R9010270 - page 136

    14. Installation menu Image 14-1 Lens adjustment Use ↑ and ↓ for zoom Use ← and → for focus Press <enter> for SHIFT mode Press <LOGO> or <LENS> for test pattern Image 14-2 Lens adjustment Use ↑ and ↓ for vertical shift Use ← and → for horizontal shift Press <enter> for ZOOM/FOCUS Press <LOGO> or <LEN ...

  • Barco R9010270 - page 137

    14. Installation menu Image 14-4 Image 14-5 Image 14-6 How to change the common address ? 1. Press MENU to activate the menu bar. 2. Press → to selec t the Installation . (image 14-7) 3. Press ↓ to pull down the Installation menu 4. Use ↑ or ↓ to selec t Projector address 5. Press ENTER A dialog box appears on the screen. Use the ↑ to scr ...

  • Barco R9010270 - page 138

    14. Installation menu 14.3 Orientation Projector orientat ions Depending on how the projector is oriented, the projector ’s inter nal settings have to be adapted. See also Chapter “Installation”, “Orientation” . How to change the orien tation ? 1. Press MENU to activate the menu bar. 2. Press → to select the Installation item. (image 14 ...

  • Barco R9010270 - page 139

    14. Installation menu Image 14-1 1 14.5 Quick access keys What can be done ? The 3 function keys on top of the RCU (F 1, F2 and F3) can be associated with a particular item in one of the menus. Each function which is not password protected c an be associated to a function key . How to get an overview of the quick access key s ? 1. Press MENU to act ...

  • Barco R9010270 - page 140

    14. Installation menu 2. Push the desired function key for 3 seconds. The menu item is stored behind the quick access key . Th e message Quick Access key stored will be displayed. 14.6 RS baud rate How to change the RS baudrate? 1. Press MENU to activate the menu bar. 2. Press → to select the Installation item. (image 14-14) 3. Press ↓ to pull ...

  • Barco R9010270 - page 141

    14. Installation menu Image 14-15 14.8 Automatic startup What can be done ? The automatic startup allows immediate restart of the projector after a power failure (breakdown), i.e. without passing through the standby state. The projector restarts at power r esume and recovers the previous settings (p revious source,...). This function can be disable ...

  • Barco R9010270 - page 142

    14. Installation menu 14.9 Security What can be done ? A security function is implemented in the projector that allows a protection against theft. A PIN code allows the user to lock the projector in case of wrong code entry . The PIN code must be en tered at each start up (Power ON), enteri ng three times a wrong number triggers a wait cycle of 15 ...

  • Barco R9010270 - page 143

    14. Installation menu Security Activating the security mode involves the following things: - The startup screen (identification window ) will contain a line w iththe name of the owner in it. - You w ill be asked to enter a PIN code every time the projector lost its pow er. Are you sure you w ant to activate the "Security mode" YES NO Imag ...

  • Barco R9010270 - page 144

    14. Installation menu 140 R5976816 R LM R6+ PERFORMER 02/06/2006 ...

  • Barco R9010270 - page 145

    15. Service 15. SER VICE Overview • V ersion T able • Lamps and Power supp ly • Board Identification • Diagnostics • Formatter firmware • Formatter reset 15.1 V ersion T able What is possible ? T o get an overview of the different software and firmware version inside the projector . How to get t he version t able 1. Press MENU to activa ...

  • Barco R9010270 - page 146

    15. Service How to get the l amps and power suppl y overvi ew ? 1. Press MENU to activate the menu bar . (image 15-3) 2. Press → to select the Se rvice item. 3. Press ↓ to pull down the menu. 4. Use ↑ or ↓ to select Lam ps and Power supply ... . 5. Press ENTER . An list dialog box opens. (image 15-4) Image 15-3 Image 15-4 15.3 Board Identif ...

  • Barco R9010270 - page 147

    15. Service Image 15-5 Image 15-6 15.4 Diagnostics Overview • I²C Diagnostics • Lamps and power su pply 15 .4.1 I² C Diagnosti cs Wh at can be done ? The I 2 C bus allows the diagnostic of different hardware components How to display t he diagnostics menu ? 1. Press MENU to activate the menu bar. 2. Press → to select the Service item. (imag ...

  • Barco R9010270 - page 148

    15. Service Image 15-7 I2C Diagnostics Device Slave address Lamp driver I2C Diagnostics 0x78 Lamp Eeprom 0xA0 Power Supply 0x30 I2C Mulitplexer 0xE0 Red Formatter 0x34 Green Formatter 0x36 Blue Formatter 0x38 Motor driver 0x1A Image 15-8 15.4.2 Lamps and power supply What can be done ? This menu item gives an overview of the lamp and power supply e ...

  • Barco R9010270 - page 149

    15. Service Image 15-10 15.5 Formatter firmware How to di spla y ? 1. Press MENU to activate the menu bar . (image 15-1 1) 2. Press → to select the Se rvice item. 3. Press ↓ to pull do wn the menu. 4. Use ↑ or ↓ to select Formatter firm ware... . 5. Press ENTER . An options dialog box opens. (image 15-12) Image 15-1 1 Image 15-12 15.6 Forma ...

  • Barco R9010270 - page 150

    15. Service How to di spla y ? 1. Press MENU to activate the m enu bar . (image 15-13) 2. Press → to select the Se rvice item. 3. Press ↓ to pull down the menu. 4. Use ↑ or ↓ to selec t Formatter reset... . 5. Press ENTER . An confirmation dialog box opens. (image 15-14) Image 15- 13 Image 15-14 146 R5976816 R LM R6+ PERFORMER 02/06/2006 ...

  • Barco R9010270 - page 151

    16. Adjustment menu (check up) 16. ADJUSTMENT MENU (CHECK UP) Overview • Internal patterns • Convergence •M o r e . . All items in the adjus tment menu are given for check up. No adjustments are possible. 16.1 Internal patterns How to s elect ? 1. Press MENU to activate the menu bar. 2. Press → to select th e Adjustment item. (image 16-1) 3 ...

  • Barco R9010270 - page 152

    16. Adjustment menu (check u p) 16.2 Convergence Only for check up of the c onvergence, no adjustmen t is possible in the field. When a convergence prob lem occurred, contact a Barco service center. How to s elect ? 1. Press MENU to activate the menu bar. 2. Press → to select th e Adjustment item. (image 16-2) 3. Press ↓ to pull down the Adjust ...

  • Barco R9010270 - page 153

    A. Standard Ima ge Files A. ST ANDARD IMAGE FILES A.1 T able overvi ew T able overvi ew The following standard image files are pre-programmed in the projector . Name 4 Fvert Hz 5 FHor kHz 6 Fpix MHz 7 Ptot 8 Pact 9 Ltot 10 La ct 11 Video625 25,00 15,625 11 , 2 5 720 680 625 560 Video525 29,97 15,734 11 , 3 3 720 680 525 472 SDI_625 25,00 15,625 13, ...

  • Barco R9010270 - page 154

    A. Standard Ima ge Files Name 4 Fvert Hz 5 FHor kHz 6 Fpix MHz 7 Ptot 8 Pact 9 Ltot 10 La ct 11 1280x768RB@60 59,994 47,396 68,250 1440 1280 790 768 1280x960@85 85,005 85,940 128,505 1728 1280 101 1 96 0 1280x1024@60 60,018 63,980 107,997 1688 1280 1066 1024 1280x1024@75 75,023 79,974 134,997 1688 1280 1066 1024 1280x1024@85 85,027 91,149 157,506 1 ...

  • Barco R9010270 - page 155

    B. Maintenance of t he Projector B. MAINTENANCE OF THE PROJECT OR B.1 Air Filters About m aintaining t he air filters It is recommended that you replace the a ir fil ters (located at the bottom of the projecto r) when you replace the lamp - or sooner , in dusty or dirty environment. I n the latter case, check monthly if replacement is required. A c ...

  • Barco R9010270 - page 156

    B. Maintenance of the Projector A B Image B-2 C Image B-3 A vailabl e kit All the 5 air filters are assembled to 1 kit, order number R401045K 152 R5976816 R LM R6+ PERFORMER 02/06/2006 ...

  • Barco R9010270 - page 157

    C. Specifications C. SPECIFICA TIONS C.1 RLM R6+ Performer specifications Overview Light Out put 6000 ANSI Lumen 6500 Center lumen Resolution 1400 x 1050 (native) Contrast ratio 1600:1 (full field) Lamp 2 x 250 W mercury Lamp warranty: 1000 hrs Ambient t emperat ure Max 40°C ( 104°F) Power consum ption 700 W Mains V oltage 92-240 V Weig ht Projec ...

  • Barco R9010270 - page 158

    C. Specifications Inputs Fixed inputs • 1x Configurable 5-Wire (BNC) • 1x Composite Video (BNC) • 1x S-Video (4-pin mini-DIN) • 1x analogue RGB (D15 conn ector) • 1x SDI/HDSDI (+ loop th rough) • 1x DVI (Digital Visual Interface) Communicatio n • 1x RS-232C IN (D-9 connector) • 1x RS-232C OU T (D-9 connector) • 1x RS-232C IN (XLR ...

  • Barco R9010270 - page 159

    Gloss ary GLOSSAR Y 2:2 pull-down The process of transferring 24-frames/sec film format into video by repeating each frame (used for P AL DVD’s) as t wo video fields. (A D) 3:2 pull-down Method used to map the 24 fps of film onto the 30 fp s (60 fields) o r 25 fps (50 fields), so that one film frame occupies three video fields, the next two, etc. ...

  • Barco R9010270 - page 160

    Gloss ary PiP PiP stands for "Picture in Picture" and allows to display multiple windows containing each of them an image. The windows ma y be of the video or data type. Projector address Address installed in the projector to be individually controlled. SDI Serial Digital Interface Vide o Sele ctor The Video Selector is a graphical interf ...

  • Barco R9010270 - page 161

    Index INDEX A Address 41–42, 132 Program 42 RCU 42 Projector address 132 setting 41 Adjustment 44–45 Lens 44–45 Remote Control 45 Via Menu Bar 44 With Control buttons 44 Adjustments 131 Lens 131 AGC 88 AGC on Vid eo 88 Air filters 151 Aspect ratio 69 Auto Image 1 1 1, 122 Setup 122 Automatic load 1 17 B Background 103–104 Brightness 64 C Cl ...

  • Barco R9010270 - page 162

    Index Input source connection 23, 25–27, 29 5-Cable input 23 Composite Video input 25 Computer input 29 DVI 27 HDSDI 29 RGB analog 29 S-Video input 26 SDI 29 Input balance 83, 85–87 Adjust 85 Black balance 85 Introduction 83 White balance 86 YPrPb sigals 87 Input source connections 32–34 Extended configuration 32–34 5-cable 32 Introduction ...

  • Barco R9010270 - page 163

    Index 5-cable input 52 Composite video 53 How 51 Overview 51 S-Video 53 Use of icons 51 Video selector 54 Start up 47 T ools menu 91, 93–98 Overview 91 PiP 91 PiP add window 94 PiP Adjust 98 PiP delete layout 98 PiP layout 96 PiP remove window 95 PiP rename layout 97 PiP Save 96 PiP select 93 Using the dialog boxes 48 Using the menu 47 Via LCD pa ...

  • Barco R9010270 - page 164

    Index Startup screen 1 19 Status bar position 121 Switching 101 Switching mode 101 Switching off 39 Switching to standby 38 T T emperature 1 1 Ambient 1 1 Te x t B o x 1 1 9 T int 65 T ools menu 91, 93 Overview 91 PiP 91 Introduction 91 PiP select 93 V Video 25–26 Composite Video 25 S-Vi deo 26 Z Zoom-Focus setting 1 18 160 R5976816 R LM R6+ PERF ...

  • Barco R9010270 - page 165

    Revision Sheet To : Barco nv Even ts/Documentation Noordlaan 5, B-8520 Kuurne Phone: +32 56.36.8 9.70, Fax: +32 56.36.88.24 E-mail: service.media_and_entertainmen t.emea@barco.com, Web: ww w .barco.com From: Date: Please correct the following points in this documentation ( R5976816/03 ): page wrong correct R5976816 RLM R6+ P ERFORMER 02/06/2006 ...

Manufacturer Barco Category Projector

Documents that we receive from a manufacturer of a Barco R9010270 can be divided into several groups. They are, among others:
- Barco technical drawings
- R9010270 manuals
- Barco product data sheets
- information booklets
- or energy labels Barco R9010270
All of them are important, but the most important information from the point of view of use of the device are in the user manual Barco R9010270.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Barco R9010270, service manual, brief instructions and user manuals Barco R9010270. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Barco R9010270.

Similar manuals

A complete manual for the device Barco R9010270, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Barco R9010270 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Barco R9010270.

A complete Barco manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Barco R9010270 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Barco R9010270, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Barco R9010270, that we can find in the current document
3. Tips how to use the basic functions of the device Barco R9010270 - which should help us in our first steps of using Barco R9010270
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Barco R9010270
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Barco R9010270 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Barco R9010270?

Use the form below

If you did not solve your problem by using a manual Barco R9010270, ask a question using the form below. If a user had a similar problem with Barco R9010270 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)