Manual EIKI LC-WXL200

92 pages Not applicable
Download

Go to site of 92

Summary
  • EIKI LC-WXL200 - page 1

    Network Supported Refer to the Owner's Manuals below for details about network function. □ Network Set-up and Operation □ PJ Network Manager Multimedia Projector Owner's Manual LC-WXL200 MODEL ...

  • EIKI LC-WXL200 - page 2

    2 This Multimedia Projector is designed with most advanced technology for portability , durability , and ease of use. This projector utilizes built-in multimedia features, a palette of 1.07 billion colors, and matrix liquid crystal display (LCD) technology . ♦ Functionally Rich ♦ Multi-use Remote Control Use the remote control as wired and wire ...

  • EIKI LC-WXL200 - page 3

    3 T able of Contents Features and Design . . . . . . . . . . . . . . . 2 T able of Contents . . . . . . . . . . . . . . . . . . 3 T o The Owner . . . . . . . . . . . . . . . . . . . . . 4 Safety Instructions . . . . . . . . . . . . . . . . . 5 Air Circulation 6 Installing the Projector in Proper Directions 7 Moving the Projector 8 Cautions in Handl ...

  • EIKI LC-WXL200 - page 4

    4 Safety Precaution W ARNING: ● THIS APP ARA TUS MUST BE EARTHED. ● T O REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE T O RAIN OR MOISTURE. – This projector produces intense light from the projection lens. Do not stare directly into the lens, otherwise eye damage could result. Be especially careful that children do n ...

  • EIKI LC-WXL200 - page 5

    5 All the safety and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. Follow all warnings and instructions marked on the project ...

  • EIKI LC-WXL200 - page 6

    6 Openings in the cabinet are provided for ventilation. T o ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered. CAUTION Hot air is exhausted from the exhaust vent. When using or installing the projector , the following precautions should be taken. – Do not put any flammable o ...

  • EIKI LC-WXL200 - page 7

    7 Use the projector properly in specified positions. Improper positioning may reduce the lamp life and result in severe accident or fire hazard. This projector can project the picture in upward, downward, or inclined position in perpendicular direction to the horizontal plane. When installing the projector in downwardly inclined position, install t ...

  • EIKI LC-WXL200 - page 8

    8 Safety Instructions Moving the Projector Cautions in Handling the Projector Use the handle grip when moving the projector . Retract the adjustable feet to prevent damage to the lens and cabinet when carrying. When this projector is not in use for an extended period, put it into a suitable case to protect the projector . CAUTION IN CARR YING OR TR ...

  • EIKI LC-WXL200 - page 9

    9 AC Power Cord for the United Kingdom: This cord is already fitted with a moulded plug incorporating a fuse, the value of which is indicated on the pin face of the plug. Should the fuse need to be replaced, an AST A approved BS 1362 fuse must be used of the same rating, marked thus AS A . If the fuse cover is detachable, never use the plug with th ...

  • EIKI LC-WXL200 - page 10

    10 Part Names and Functions CAUTION Hot air is exhausted from the exhaust vent. Do not put heat-sensitive objects near this side. ① Lens Release Button ② Indicators ③ Lamp Cover ④ Speaker ⑤ Lens Cap ⑥ Projection Lens ⑦ Infrared Remote Receiver (Front & T op) ⑧ Side Controls ⑨ Exhaust V ent Bottom Back ⑮ ⑭ ⑩ ⑫ ⑬ ⑪ ? ...

  • EIKI LC-WXL200 - page 11

    1 1 ⑦ R/C JACK When using the wired remote control, connect the wired remote control to this jack with a remote control cable (supplied) (p.15). ⑮ USB CONNECTOR (Series B) Use this connector when controlling a computer with the remote control of the projector . Connect the USB terminal of your computer to this connector with a USB cable (p.19). ...

  • EIKI LC-WXL200 - page 12

    12 ① ON/ST AND-BY button T urn the projector on or of f (pp.23-24). ② MENU button Open or close the On-Screen Menu (p.25). ⑤ Point ▲▼◄► ( VOLUME – / + ) buttons – Select an item or adjust the value in the On- Screen Menu (p.25). – Pan the image in Digital zoom + mode (p.43). – Adjust the volume level (with Point ◄► buttons ...

  • EIKI LC-WXL200 - page 13

    13 ① ST AND-BY button T urn the projector of f (p.24). ④ ON button T urn the projector on (p.23). ⑥ INPUT button Select a signal (pp.33-35). ⑧ SCREEN button Select the screen size (p.29).   ⑭  ⑭ L-CLICK button Act as the left mouse button for wireless mouse operation (p.32). ③ SIGNAL EMISSION indicator Light red while a signa ...

  • EIKI LC-WXL200 - page 14

    14 ⑯ ⑮ ⑲ ⑰ ⑱ ⑱ ZOOM ▲▼ buttons Zoom in and out the images (p.29). ⑮ D.ZOOM button Select the Digital zoom +/- mode and resize the image (p.43). ⑲ PIP button Operate the Picture in Picture function. (pp.30,55-56) ㉒ FIL TER button Scroll the filter (p.30). ㉔ FREEZE button Freeze the picture on the screen (p.30). ⑰ KEYSTONE b ...

  • EIKI LC-WXL200 - page 15

    15 1 2 3 Open the battery compartment lid. Install new batteries into the compartment. Replace the compartment lid. Press the lid downward and slide it. T wo AAA size batteries For correct polarity (+ and –), be sure battery terminals are in contact with pins in the compartment. T o ensure safe operation, please observe the following precautions ...

  • EIKI LC-WXL200 - page 16

    16 The eight different remote control codes (Code 1–Code 8) are assigned to this projector . Switching the remote control codes prevents interference from other remote controls when several projectors or video equipment next to each other are operated at the same time. Change the remote control code for the projector first before changing that fo ...

  • EIKI LC-WXL200 - page 17

    17 Installation For projector positioning, see the figures below . The projector should be set perpendicularly to the plane of the screen.  Note: • The brightness in the room has a great influence on picture quality . It is recommended to limit ambient lighting in order to obtain the best image. • All measurements are approximate and may var ...

  • EIKI LC-WXL200 - page 18

    18 When replacing the lens or using an optional lens, install the lens by following the instructions below . Ask the sales dealer for detailed information of the optional lens specifications. Shift the lens to the center position by using the Lens shift function (p.27). 1 2 Removing the lens CAUTION Be careful when handling the lens. Do not drop. 3 ...

  • EIKI LC-WXL200 - page 19

    19 Monitor Output BNC cable DVI Output G B R H/V V HDMI-DVI cable VGA cable VGA cable USB cable USB port Unplug the power cords of both the projector and external equipment from the AC outlet before connecting cables. Cables used for connection (  = Cables not supplied with this projector .) • VGA Cable (One cable is supplied.) • HDMI-DVI ca ...

  • EIKI LC-WXL200 - page 20

    20 RGB Scart 21-pin Output S-video cable S-video Output Composite Video Y - Pb/Cb - Pr/Cr BNC cable Unplug the power cords of both the projector and external equipment from the AC outlet before connecting cables. Cables used for connection (  = Cables not supplied with this projector .) • Video cable (RCA x 1 or RCA x 3)  • BNC cable (BNC ...

  • EIKI LC-WXL200 - page 21

    21 Audio Output AUDIO IN 1/2 Unplug the power cords of both the projector and external equipment from the AC outlet before connecting cables. Cables used for connection (  = Cables not supplied with this projector .) Audio Output Installation Audio cable (stereo) (R) (L) External Audio Equipment Audio Input AUDIO OUT (stereo) • Audio cable  ...

  • EIKI LC-WXL200 - page 22

    22 This projector uses nominal input voltages of 100–240 V AC and it automatically selects the correct input voltage. It is designed to work with single-phase power systems having a grounded neutral conductor . T o reduce the risk of electrical shock, do not plug into any other type of power system. If you are not sure of the type of power being ...

  • EIKI LC-WXL200 - page 23

    23 Connect the projector ’s AC power cord into an AC outlet. The LAMP indicator lights red and the POWER indicator lights green. Press the ON/ST AND-BY button on the side control or the ON button on the remote control. The LAMP indicator dims and the cooling fans start to operate. The preparation display appears on the screen and the countdown st ...

  • EIKI LC-WXL200 - page 24

    24 Basic Operation What is PIN code? PIN (Personal Identification Number) code is a security code that allows the person who knows it to operate the projector . Setting a PIN code prevents unauthorized use of the projector . A PIN code consists of a four-digit number . Refer to the PIN code lock function in the Setting Menu on pages 61-62 for locki ...

  • EIKI LC-WXL200 - page 25

    25 Dynamic Dynamic Side Control MENU button On-Screen Menu Remote Control POINT buttons SELECT button MENU button Basic Operation The projector can be adjusted or set via the On-Screen Menu. The menu has a hierarchical structure, with a main menu that is divided into submenus, which are further divided into other submenus. For each adjustment and s ...

  • EIKI LC-WXL200 - page 26

    26 Basic Operation For detailed functions of each menu, see “Menu T ree” on pages 76-78.         Main Menu Sub-Menu    Image select For computer source, used to select an image level among Dynamic , Standard , Real , and Image 1-10 (p.40). For Video source, used to select an image level among Dynamic , Standard ...

  • EIKI LC-WXL200 - page 27

    27 The following lens operation can be made with the Lens button on the side control. Press the LENS button to enter each lens operation mode. The selected adjustment display appears on the screen. Display Lens shift on the screen. Use the Point ▲▼◄► buttons to position the screen to the desired point without having picture distortion. The ...

  • EIKI LC-WXL200 - page 28

    28 VOLUME + button VOLUME – button MUTE (Point ▼) button Side Control Basic Operation 1 2 Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select Sound . Press the Point ► or the SELECT button to access the submenu items. Press the VOLUME+/– buttons on the side control or on the remote control to adjust t ...

  • EIKI LC-WXL200 - page 29

    29 Using the remote control for some frequently used operations is advisable. Just pressing one of the buttons enables you to make the desired operation quickly without calling up the On-Screen Menu. Press the ZOOM buttons on the remote control to zoom in and out the image. ZOOM buttons Press the FOCUS buttons on the remote control to adjust focus ...

  • EIKI LC-WXL200 - page 30

    30 Press the FREEZE button on the remote control to freeze the picture on the screen and Audio mute. T o cancel the FREEZE function, press the FREEZE button again or press any other button. Fig.1 will appear when the Freeze function is working. FREEZE button FIL TER button Press and hold the FIL TER button for more than five seconds to operate elec ...

  • EIKI LC-WXL200 - page 31

    31 Remote Control POINT ▲▼◄► buttons KEYSTONE button Basic Operation If a projected picture still has keystone distortion after pressing the AUTO PC button on the remote control, correct the image manually as follows: Press the KEYSTONE button on the remote control to switch the Standard (for V ertical/Horizontal) /Corner correction adjustm ...

  • EIKI LC-WXL200 - page 32

    32  Note: Y ou can choose the pattern of Pointer ( Dot/Arrow / Finger ) in the Setting Menu (p.60) Y ou can move the Pointer of the projector with the remote control to emphasize a part of the projected image. Press the POINTER button to activate the Pointer function. 1 2 3 MOUSE POINTER button POINTER button T o cancel the Pointer function, pre ...

  • EIKI LC-WXL200 - page 33

    33 The input source changes each time you press the INPUT button on the side control or the remote control as follows: Input 1→ Input 2→ Input 3 → ... Before using the INPUT button on the side control or the remote control, you must select a correct input source by On- Screen Menu and the latest input source will be displayed. Input Selection ...

  • EIKI LC-WXL200 - page 34

    34 INPUT MENU When your computer is connected to the INPUT 1 (ANALOG) terminal, select RGB (PC analog) . RGB(PC analog)  Note: Input source changes if the INPUT 1 button on the remote control is pressed. When connecting the computer output [5 BNC T ype (Green, Blue, Red, Horiz. Sync, and V ert. Sync.)] from the computer to G, B, R, H/HV , and V ...

  • EIKI LC-WXL200 - page 35

    35 When the video input signal is connected to the Y -Pb/Cb-Pr/Cr jacks, select Y ,Pb/Cb,Pr/Cr . When the video input signal is connected to the VIDEO jack, select Video . When the video input signal is connected to the S-VIDEO jack, select S-video . When connecting to video equipment, select the type of Video source in the Source Select Menu. When ...

  • EIKI LC-WXL200 - page 36

    36 Computer Input PC System Menu PC System Menu 1 2 PC system can also be selected manually . The PC System Menu Selected system is displayed. Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select Input and then press the Point ► or the SELECT button. Use the Point ▲▼ buttons to select Systerm and then pr ...

  • EIKI LC-WXL200 - page 37

    37 Auto PC Adjustment function is provided to automatically adjust Fine sync, T otal dots, Position H and Position V to conform to your computer . T o store the adjusted parameters. The adjusted parameters from the Auto PC Adjustment can be stored in the projector . Once the parameters are stored, the setting can be done just by selecting Mode in P ...

  • EIKI LC-WXL200 - page 38

    38 Some computers employ special signal formats which may not be tuned by Multi-Scan system of this projector . Manual PC Adjustment enables you to precisely adjust several parameters to match those special signal formats. The projector has 10 independent memory areas to store those parameters manually adjusted. It allows you to recall the setting ...

  • EIKI LC-WXL200 - page 39

    39 Computer Input  Note: • Display area (H/V) cannot be selected when 480i , 575i , 480p , 575p , 720p , 1035i , 1080i or 1080p is selected in the PC System Menu (p.36). • When input computer signal to the projector , PC adjust function will become available. Mode 1 Mode 2 Mode 3 Mode 4 Mode 5 Mode 6 Mode 7 Mode 8 Mode 9 Mode 10 0 0 T otal d ...

  • EIKI LC-WXL200 - page 40

    40 1 2 Normal picture level preset on the projector . Picture level with improved halftone for graphics. User preset picture adjustment in the Image adjust Menu. (pp.41- 42) Computer Input Image select Menu Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select Image select and then press the Point ► or the SE ...

  • EIKI LC-WXL200 - page 41

    41 Computer Input Image adjust Menu Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select Image adjust and then press the Point ► or the SELECT button. 1 2 Use the Point ▲▼ buttons to select the desired item and then press the SELECT button to display the adjustment dialog box. Use the Point ◄► button ...

  • EIKI LC-WXL200 - page 42

    42 Select the desired screen size that conforms to the input signal source. SCREEN MENU 1 2 Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select Screen and then press the Point ► or the SELECT button. Use the Point ▲▼ buttons select the desired item and then press the SELECT button. T o reset the adjuste ...

  • EIKI LC-WXL200 - page 43

    43 Computer Input  Note: • When no signal is detected, Normal is set automatically and the Aspect dialog box disappears. • The adjustable range for Scale H/V and Position H/V is limited depending on the input signal. Custom adj. Custom adj. Select Digital zoom + . The On-Screen Menu disappears and D. zoom + appears. Press the SELECT button t ...

  • EIKI LC-WXL200 - page 44

    44 Computer Input This function is used to adjust keystone distortion of the projected image. Use the Point ▲▼ buttons to choose the item you want to adjust. Keystone This function returns all adjusted values to the factory default settings. Press the SELECT button at Reset to display a confirmation box. T o reset, press the SELECT button at Y ...

  • EIKI LC-WXL200 - page 45

    45 If the projector cannot reproduce proper video image, select a specific broadcast signal format from among P AL , SECAM , NTSC , NTSC 4.43 , P AL-M , and P AL-N . The projector automatically detects an incoming video signal, and adjusts itself to optimize its performance. When the Video System is 1035i , 1080i or 1080p , select the system manual ...

  • EIKI LC-WXL200 - page 46

    46 Normal picture level preset on the projector . Picture level adjusted with fine tone. User preset picture adjustment in the Image adjust Menu. (p.48) V ideo Input Image select Menu 1 2 Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select Image select and then press the Point ► or the SELECT button. Use th ...

  • EIKI LC-WXL200 - page 47

    47 1 2 Press the Point ◄ button to decrease the contrast; press the Point ► button to increase the contrast (from 0 to 63). Press the Point ◄ button to decrease the brightness; press the Point ► button to increase the brightness (from 0 to 63). Press the Point ◄ button to lighten red tone; press the Point ► button to deepen red tone (fr ...

  • EIKI LC-WXL200 - page 48

    48 Use the Point ◄► buttons to adjust the gamma value to obtain a better balance of contrast (from 0 to 15). Press the Point ◄ button to decrease the sharpness of the image; press the Point ► button to increase the sharpness of the image (from 0 to 31). An interlaced video signal can be displayed in progressive mode. Press the Point ◄► ...

  • EIKI LC-WXL200 - page 49

    49 V ideo Input Custom adj. 1 2 Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select Screen and then press the Point ► or the SELECT button Use the Point ▲▼ buttons to select the desired item and then press the SELECT button. Screen Size Adjustment  Note: • When no signal is detected, Normal is set ...

  • EIKI LC-WXL200 - page 50

    50 V ideo Input This function returns all adjusted values to the factory default settings. Press the SELECT button at Reset to display a confirmation box. T o reset, press the SELECT button at “Y es.” Ceiling Rear When this function is set to On , the picture will be top/bottom and left/right reversed. This function is used to project the image ...

  • EIKI LC-WXL200 - page 51

    51 Setting Setting Menu Press the MENU button to display the On-Screen Menu. Press the Point ▲▼ buttons to select Setting and press the Point ► or the SELECT button to access the submenu items. 1 2 Use the Point ▲▼ buttons to select the desired item and then press the Point ► or the SELECT button to access the selected item. This projec ...

  • EIKI LC-WXL200 - page 52

    52 This function decides whether to display On-Screen Displays. On ............................... Show all the On-Screen displays. Use this function when you want to project images after the lamp becomes bright enough. The factory default setting is in this option. Countdown Off .......... Show the input image instead of the countdown when turning ...

  • EIKI LC-WXL200 - page 53

    53 Setting Capture Capture This function enables you to capture an image being projected to use it for a starting-up display or interval of presentations. Select Capture and press the SELECT button. A confirmation box appears and select Y es to capture the projected image. After capturing the projected image, go to the Logo select function and set ...

  • EIKI LC-WXL200 - page 54

    54 Setting Enter a Logo PIN code Use the Point ▲▼ buttons to enter a number . Press the Point ► button to fix the number and move the red frame pointer to the next box. The number changes to  . If you fixed an incorrect number , use the Point ◄ button to move the pointer to the number you want to correct, and then enter the correct numbe ...

  • EIKI LC-WXL200 - page 55

    55 Setting Picture in Picture Picture in Picture Selected Mode Status ( Stored / Free / Adj. ) of the selected mode. Position Menu Active frame (White) Center line display  Note: • The Picture in Picture function is not available depending on the input signals and the selected input terminals. Refer to ‘List of Picture in Picture‘ for deta ...

  • EIKI LC-WXL200 - page 56

    56 This function is only used for HDMI input source. Image Select Normal or Enhanced to match the video range setting of your HDMI Digital RGB equipment. Sound HDMI : When using the HDMI cable, select HDMI . Both video and audio are transferred and you need not to connect any additional cables for audio. AUDIO 1 : When using the DVI-HDMI cable, sel ...

  • EIKI LC-WXL200 - page 57

    57 This function allows you to change brightness of the screen. Lamp life control Lamp control Select the lamp operation when the total lighting time of a lamp exceeds the recommended total hours of use. Mode 1 ............ A lamp can be turned on even after exceeding the recommended total hours of use. Mode 2 ............ A lamp can be turned on e ...

  • EIKI LC-WXL200 - page 58

    58 Choose the running speed of cooling fans from the following options. Normal ...... Operate in this mode under normal conditions. Max ........... Use this mode when you want to increase the cooling effect when operating the projector in high ambient temperature environment. Fan noise is louder than Normal . Setting Simple mode buttons Only these ...

  • EIKI LC-WXL200 - page 59

    59  Note: • Factory default is Ready: 5 Min . • When the shutter is closed while the Power management function is working, the Power management function is released. Setting Select a location of the infrared remote receiver of the remote control. See “Remote Control Receivers and Operating Range” on page 15 for details. All ............ ...

  • EIKI LC-WXL200 - page 60

    60 Setting When this function is set to On , the projector will be automatically turned on just by connecting the AC power cord to the wall outlet.  Note: Be sure to turn off the projector properly (see “T urning Off the Projector” on page 24). If the projector is turned off in the incorrect sequence, the Direct on function does not work pro ...

  • EIKI LC-WXL200 - page 61

    61 Setting Key lock Key lock PIN code lock This function locks the side control and remote control buttons to prevent operation by unauthorized persons. . . . . . . Unlocked. . . . . . . Lock the operation of the side control. T o unlock, use the remote control. . . . . . . Lock the operation of the remote control. T o unlock, use the side control. ...

  • EIKI LC-WXL200 - page 62

    62 Setting Use the Point ▲▼ buttons to select Off , On 1 or On 2 . Press the SELECT button to close the dialog box. Change the PIN code lock setting Enter a PIN code Use the Point ▲▼ buttons to enter a number . Press the Point ► button to fix the number and move the red frame pointer to the next box. The number changes to  . If you fix ...

  • EIKI LC-WXL200 - page 63

    63 Shutter function is available to block out light to the screen, so that the screen can be used for the other presenters. Prohibit the shutter operation from the remote control and the projector's side control. Remote control . . Selecting On prohibits the shutter operation from the remote control. Projector . . . . Selecting On prohibits th ...

  • EIKI LC-WXL200 - page 64

    64 When you want to make a digital processing of a projected image faster , set this function. Use the Point ▲▼ buttons, select an item of Off / Low / Mid / High . Digital processing speed becomes fast by order of Low → Mid → High. High is the fastest. Video delay control Fig.1  Note: -The following functions are not available respective ...

  • EIKI LC-WXL200 - page 65

    65 This function returns all setting values except for User logo , PIN code lock , Logo PIN code lock , Filter timer and Filter counter to the factory default settings. V arious test pattern are available for use when setting up the projector . Filter replacement icon appears on the screen at a set time.  Note: • Do not reset the counter when ...

  • EIKI LC-WXL200 - page 66

    66 Filter prevents dust from accumulating on the optical elements inside the projector . Should the filter becomes clogged with dust particles, it will reduce cooling fans’ effectiveness and may result in internal heat buildup and adversely af fect the life of the projector . This projector has an electrically operated filter which helps you to r ...

  • EIKI LC-WXL200 - page 67

    67 T urn off the projector , and unplug the AC power cord from the AC outlet. First, clean up the dust on the projector and around the air vents. 1 2 Press ▼ downwards on the filter cover to release the latch and open the filter cover . 3 Put the new one back into the position and close the filter cover . Make sure that the filter cartridge is pr ...

  • EIKI LC-WXL200 - page 68

    68 Be sure to reset the Scroll counter after replacing the filter cartridge. Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select Setting and then press the Point ► or the SELECT button. Use the Point ▲▼ buttons to select Filter counter and then press the SELECT button. Use the Point ▲▼ buttons to se ...

  • EIKI LC-WXL200 - page 69

    69 Filter counter Reset? appears. Select Y es , then another confirmation box appears. Scroll counter Reset? appears. Select Y es , then another confirmation box appears. T urn off the projector and unplug the AC power cord. Let the projector cool for at least 45 minutes. Loosen the screw and open the lamp cover . Loosen 3 screws of the lamp and pu ...

  • EIKI LC-WXL200 - page 70

    70 Maintenance and Care This projector uses a high-pressure lamp which must be handled carefully and properly . Improper handling may result in accidents, injury , or create a fire hazard. ● Lam p li fet im e may d iff er f rom l am p to la mp an d acc or di ng to t he e nv ir on men t of us e. Th er e is no guara ntee of the same l ifetim e for ...

  • EIKI LC-WXL200 - page 71

    71 Unplug the AC power cord before cleaning. Gently wipe the projection lens with a cleaning cloth that contains a small amount of non-abrasive camera lens cleaner , or use a lens cleaning paper or commercially available air blower to clean the lens. Avoid using an excessive amount of cleaner . Abrasive cleaners, solvents, or other harsh chemicals ...

  • EIKI LC-WXL200 - page 72

    72 The W ARNING indicators show the state of the function which protects the projector . Check the state of the WARNING indicators and the POWER indicator to take proper maintenance. The projector is shut down and the W ARNING TEMP . indicator is blinking red. When the temperature inside the projector reaches a certain level, the projector will be ...

  • EIKI LC-WXL200 - page 73

    73 Before calling your dealer or service center for assistance, check the items below once again. 1. Make sure you have properly connected the projector to perip heral equipment as described on pages 19-21. 2. Check the cable connection. Make sure that all computers, vid eo equipment, and power cords are properly connected. 3. Make sure that all po ...

  • EIKI LC-WXL200 - page 74

    74 appears on the screen – Filter is out of scroll. Replace the filter cartridge with a new one promptly . (See pages 67-68) The image is out of focus. – Adjust the focus of the projector . – Check Projection Lens to see if it needs cleaning.  Note: Moving the projector from a cool temperature location to a warm temperature location may re ...

  • EIKI LC-WXL200 - page 75

    75 W ARNING: High voltages are used to operate this projector . Do not attempt to open the cabinet. If problems still persist after following all operating instructions, contact the dealer where you purchased the projector or the service center . Specify the model number and explain about the problem. We will advise you how to obtain service. Appen ...

  • EIKI LC-WXL200 - page 76

    76 Input RGB (PC analog) Y , Pb/Cb,Pr/Cr RGB (Scart) HDMI Network Video RGB Video Y , Pb/Cb,Pr/Cr S-video Input 3 Input H-sync freq. V -sync freq. Information Screen Language Lamp status Power management Remote control  Note: The Menu display varies depending on the input signal. Appendix V olume Mute On/Off Sound 0-63 Built-in SP PIN code lock ...

  • EIKI LC-WXL200 - page 77

    77  Note: The Menu display varies depending on the input signal. System (2) Auto P AL SECAM NTSC NTSC 4.43 P AL-M P AL-N System (3) Auto 1080i 1035i 720p 575p 480p 575i 480i Image select Cinema Appendix Screen Normal Wide(16:9) Full Zoom Rear Keystone Ceiling Reset Store On/Off On/Off Custom adj. H & V Scale Position H / V On/Off H / V Commo ...

  • EIKI LC-WXL200 - page 78

    78 Setting Language Fan control Blue/User/Black Y es/No 12 languages provided. Menu position Lamp control Filter control All/Front&T op/T op&Back/Front&Back/Front/T op/Back Normal/Max Power management Background RC sensor Ready Off Shut down 1–30 Min On/Off Direct on Pointer On/Countdown Off/Off Display Remote Control Finger/Arrow/Dot ...

  • EIKI LC-WXL200 - page 79

    79 Check the indicators for the projector condition. Indicators Projector Condition POWER green LAMP red W ARNING TEMP . red W ARNING FIL TER orange SHUTTER blue LAMP REPLACE orange The projector is off. (The AC power cord is unplugged.) The projector is in stand-by mode. Press the ON/ ST AND-BY button to turn on the projector . The projector is op ...

  • EIKI LC-WXL200 - page 80

    80 The projector is detecting abnormal condition. Indicators Projector Condition POWER green LAMP red W ARNING TEMP . red W ARNING FIL TER orange SHUTTER blue LAMP REPLACE orange The temperature inside the projector is elevated close to the abnormally high level. The temperature inside the projector is abnormally high. The projector cannot be turne ...

  • EIKI LC-WXL200 - page 81

    81 The projector is detecting abnormal condition. Indicators Projector Condition POWER green LAMP red W ARNING TEMP . red W ARNING FIL TER orange SHUTTER blue LAMP REPLACE orange If the Filter counter reached a time set in the timer setting, a Filter replacement icon (Fig.2) appears on the screen and the W ARNING FIL TER indicator on the top panel ...

  • EIKI LC-WXL200 - page 82

    82 ON-SCREEN DISPLA Y RESOLUTION H-Freq. (kHz) V -Freq.(Hz) VGA 1 640x480 31.470 59.880 VGA 2 720x400 31.470 70.090 VGA 3 640x400 31.470 70.090 VGA 4 640x480 37.860 74.380 VGA 5 640x480 37.860 72.810 VGA 6 640x480 37.500 75.000 VGA 7 640x480 43.269 85.000 MAC LC13 640x480 34.970 66.600 MAC 13 640x480 35.000 66.670 480p 640x480 31.470 59.880 575p 76 ...

  • EIKI LC-WXL200 - page 83

    83 Appendix When the input signal is digital from HDMI terminal, refer to the chart below .  Note: •Depending on the condition of signals and the type and length of cables, these signals may not be properly viewed. •Specifications are subject to change without notice. •Y ou might be able to project images even when signals other than above ...

  • EIKI LC-WXL200 - page 84

    84 Mechanical Information Projector T ype Multi-media Projector Dimensions (W x H x D) 19.25” x 6.46” x 17.12” (489.5 mm x 164.0 mm x 434.8 mm) Net Weight 21.3 lbs (9.7 kg) Feet Adjustment 0˚ to 4˚ Panel Resolution LCD Panel System 0.75” TFT Active Matrix type, 3 panels Panel Resolution 1,280 x 800 dots Number of Pixels 3,072,000 (1,280 x ...

  • EIKI LC-WXL200 - page 85

    85 The lens of this projector can be replaced with other optional lens. This feature enables you to use the projector for wide variety of uses. For installation and replacement of the lens, always contact the sales dealer . The projector lens must be installed or replaced by well-trained sales or service engineers. Do not attempt to install and rep ...

  • EIKI LC-WXL200 - page 86

    86 ANALOG/ ANALOG OUT (Mini D-sub 15 pin) 5 1 2 3 4 10 9 6 7 8 15 14 13 11 12 CONTROL PORT CONNECT OR (D-sub 9 pin) ----- R X D T X D ----- SG ----- RTS CTS Serial 1 2 3 4 5 6 7 8 Vcc - Data + Data Ground 1 2 3 4 USB CONNECTOR (Series B) 2 3 4 1 Appendix ----- 9 Red Input Ground (Horiz.sync.) Green Input No Connect Blue Input Ground (Red) Ground (G ...

  • EIKI LC-WXL200 - page 87

    87 Write down the PIN code number in the column below and keep it with this manual securely . If you forgot or lost the number and unable to operate the projector , contact the service center . Factory default set No: 1 2 3 4* Factory default set No: 4 3 2 1* * S h o u l d t h e f o u r - d i g i t n u m b e r b e chan ged, t he fac tory s et num b ...

  • EIKI LC-WXL200 - page 88

    88 Appendix Dimensions Appendix Unit: inch (mm) 3.31(84.0) 16.39(416.2) 6.46(164.0) 5.91(150.0) 19.27(489.5) 7.25(184.2) 3.34(84.7) 6.67(169.5) 14.61(371.1) 6.25(158.8) 5.91(150.0) 6.89(175.0) 2.95(75.0) 1.18(30.0) 7.70(195.5) 3.78(96.0) 6.30(160.0) 17.12(434.8) 3.80(96.6) 4.34(1 10.3) 9.20(233.6) 4 q 13.58(344.9) Screw Holes for Ceiling Mount Scre ...

  • EIKI LC-WXL200 - page 89

    89 Appendix This projector provides a function to control and monitor the projector's operations by using the RS-232C serial port. Connect a RS-232C serial cross cable to CONTROL PORT on the projector and serial port on the PC. (See p.19) Launch a communication software provided with PC and setup the communication condition as follows: 1 2 3 B ...

  • EIKI LC-WXL200 - page 90

    90 The command is sent from PC to the projector with the format below; 'C' [Command] 'CR' Command: two characters (refer to the command table below . -The projector decodes the command and returns the 'ACK' with the format below; 'ACK' 'CR' -When the projector can not decode the command, it returns ...

  • EIKI LC-WXL200 - page 91

    91 Appendix The command is sent from PC to the projector with the format below; 'CR' [Command] 'CR' Command: one character (refer to the command table below . The projector decodes the command and returns the 'Character string' with the format below; Format The tables on page 90 and 91 show the typical command lists fo ...

  • EIKI LC-WXL200 - page 92

    KK8B U.S.A. EIKI International, Inc . 30251 Esperanza Rancho Santa Margarita CA 92688-2132 U.S.A. Tel : 800-242-34 54 (949)-457-0200 Fax : 800-457-34 54 (949)-457-7878 E-Mail : usa@eiki .com Deutschland & Öster reich EIKI Deutschland GmbH Am Frauwald 12 65510 Idstein Deutschland Tel : 06126-937 1-0 Fax : 06126-937 1-14 E-Mail : info@eiki.d e C ...

Manufacturer EIKI Category Video projector

Documents that we receive from a manufacturer of a EIKI LC-WXL200 can be divided into several groups. They are, among others:
- EIKI technical drawings
- LC-WXL200 manuals
- EIKI product data sheets
- information booklets
- or energy labels EIKI LC-WXL200
All of them are important, but the most important information from the point of view of use of the device are in the user manual EIKI LC-WXL200.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals EIKI LC-WXL200, service manual, brief instructions and user manuals EIKI LC-WXL200. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product EIKI LC-WXL200.

A complete manual for the device EIKI LC-WXL200, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use EIKI LC-WXL200 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of EIKI LC-WXL200.

A complete EIKI manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual EIKI LC-WXL200 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the EIKI LC-WXL200, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the EIKI LC-WXL200, that we can find in the current document
3. Tips how to use the basic functions of the device EIKI LC-WXL200 - which should help us in our first steps of using EIKI LC-WXL200
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with EIKI LC-WXL200
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of EIKI LC-WXL200 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning EIKI LC-WXL200?

Use the form below

If you did not solve your problem by using a manual EIKI LC-WXL200, ask a question using the form below. If a user had a similar problem with EIKI LC-WXL200 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)