Manual Cisco Systems 2940

82 pages 2.45 mb
Download

Go to site of 82

Summary
  • Cisco Systems 2940 - page 1

    Corporate He adquarters Cisc o Syst ems , Inc . 170 West Ta sman Drive San Jos e, CA 95 134-1706 USA http://www.ci sco.com Tel: 408 526-4000 800 553- NETS (638 7) Fax: 408 526-4100 Catal yst 2940 S witc h Hardware Installation Guide No vem ber 2004 Text Pa rt Nu mber: OL-6157- 01 ...

  • Cisco Systems 2940 - page 2

    THE SPECIFICATIONS AND INFORMATION REGARDING TH E PRODUCTS IN THIS MANUAL ARE SUBJE CT TO CHANGE WITHOUT NO TICE. ALL STATEMENT S, INFORMATI ON, AND RECOMMENDA TIONS IN T HIS MANUAL ARE BELIEVED TO BE ACCURATE BU T ARE PRESEN TED WITHOUT WARRANTY OF ANY KIND, EXPRE SS OR IMPLIED. USERS MUST TA KE FULL RESPONSIBILITY FOR THEIR AP PLICATION OF ANY PR ...

  • Cisco Systems 2940 - page 3

    iii Catalyst 2940 Hardware Installation Guide OL-6157-01 CONTENTS Preface vi i Audienc e vii Pur pose vii Conv enti ons vii Relat ed P ubl icatio ns xiii Obtain ing Documentati on xiv Cisco. com xi v Document ation C D-ROM xiv Orderi ng Documenta t ion xiv Document ation F e edback xv Obtain ing Technica l Assist ance xv Cisco TAC Website xv Open i ...

  • Cisco Systems 2940 - page 4

    Cont ents iv Catalyst 2940 Hardwar e Installation Guide OL-6157-01 Rear-P anel Descripti on 2-9 Power C onnector 2-9 Consol e Port 2-10 Securi ty Slots 2-10 Management Options 2-1 1 CHAPTER 2 Insta lla tion 3-1 Prepar ing for Inst allati on 3-1 Warnings 3-1 Insta llati on Gu idel ines 3-3 Verif ying Packa ge Contents 3-3 Verify ing Swit ch Op era t ...

  • Cisco Systems 2940 - page 5

    Content s v Catalyst 2940 Hardware Installation Guide OL-6157-01 100BA SE-FX Port B-4 SFP Module Slot B-4 Consol e Port B-5 Cable an d Adapter Specifi cation s B- 5 Two T wiste d-Pair Cable Pinouts B- 5 Four Tw isted- Pair Cable Pino uts for 10/ 100 Ports B-6 Four Tw isted- Pair Cabl e Pinouts for 1000BASE-T Ports B-7 Cable an d Adapter Pinouts B-8 ...

  • Cisco Systems 2940 - page 6

    Cont ents vi Catalyst 2940 Hardwar e Installation Guide OL-6157-01 ...

  • Cisco Systems 2940 - page 7

    vii Catalyst 2940 Switch Hard wa re Installation Gui d e OL-6157-01 Preface Audience This guide is for the netwo rking or computer tech nician responsible for installing a Catalyst 2940 switch, hereaft er refe rred to as the switch . W e assume that y ou are f amiliar with the concepts and termino logy o f Et hernet an d loca l are a net working. P ...

  • Cisco Systems 2940 - page 8

    viii Catalyst 2940 Swi tch Hardware In stallation Guid e OL-6157-01 Preface Conv entions War ni n g IMPORT AN T SAFE TY INST RUCTIONS This warning symbol means danger . Y ou are in a si tuation that could cause bodi ly inju ry . Bef ore you work on any equipment, be aware o f the hazards in volved with electrical circuitry and be familiar with stan ...

  • Cisco Systems 2940 - page 9

    ix Catalyst 2940 Switch Hard wa re Installation Gui d e OL-6157-01 Pre face Convent ions Avvertenza IMPOR T ANTI ISTRUZIO NI SULLA SI CUREZZA Questo simbolo di avvertenza indica un pericolo. La situazione potrebbe causare infortuni alle persone. Prima di intervenire su qualsiasi apparecchi atura, occorre essere al corrente dei pericoli relativi ai ...

  • Cisco Systems 2940 - page 10

    x Catalyst 2940 Swi tch Hardware In stallation Guid e OL-6157-01 Preface Conv entions ...

  • Cisco Systems 2940 - page 11

    xi Catalyst 2940 Switch Hard wa re Installation Gui d e OL-6157-01 Pre face Convent ions Av is o INSTR UÇÕES IM PORT AN TES DE SEGURAN ÇA Este símbolo de aviso signi fica perigo. Você se encontra em uma situação em que há risco de lesões corporais. Antes de trabalhar com qualquer equipamento, esteja ciente dos ris cos que envolvem os circu ...

  • Cisco Systems 2940 - page 12

    xii Catalyst 2940 Swi tch Hardware In stallation Guid e OL-6157-01 Preface Conv entions ...

  • Cisco Systems 2940 - page 13

    xiii Catalyst 2940 Switch Hard wa re Installation Gui d e OL-6157-01 Pre face Relate d Publicati ons Related Publications These do cuments p rovid e comple te informati o n about th e switch and ar e av ailable from this U RL: http://www .cisco.com/uni vercd/ cc/td/doc/pr oduct/lan/ca t2940/inde x .htm Y ou can order printed c opies of d ocument s ...

  • Cisco Systems 2940 - page 14

    xiv Catalyst 2940 Swi tch Hardware In stallation Guid e OL-6157-01 Preface Obtain ing Do cument ation Obtaining Documentation Cisco provides several ways to obtain docume ntatio n, techni cal assistan ce, a nd other techni cal resourc es. These secti ons expla in how to obta in tec hnical informa tion fr om Ci sco System s. Cisco.com Y ou can acces ...

  • Cisco Systems 2940 - page 15

    xv Catalyst 2940 Switch Hard wa re Installation Gui d e OL-6157-01 Pre face Obtaining Technical Assistance Documentatio n Feed back Y ou can submit co mments electr onicall y on Cisco.com . On the Cisco D ocument atio n home page, click F eedback at the top of the page. Y ou can send y our c omment s in e-mail to bug-doc @cisc o.com . Y ou can subm ...

  • Cisco Systems 2940 - page 16

    xvi Catalyst 2940 Swi tch Hardware In stallation Guid e OL-6157-01 Preface Obtainin g Addi tional Pub lications and Informat ion T o open a ca se by te lephone, use o ne of the following nu mbers: Asia-Pacific: +61 2 8446 7411 (Austr alia: 1 800 80 5 227) EMEA: +3 2 2 704 55 55 USA: 1 800 553-2 447 For a complete listing of Cisco T A C contacts, go ...

  • Cisco Systems 2940 - page 17

    xvii Catalyst 2940 Switch Hard wa re Installation Gui d e OL-6157-01 Pre face Obtaining Additional Publications and Information • Intern et Protocol Jour nal is a quarte rly jour nal publis hed by Cisco Systems for engin eering professiona ls inv olved in de signin g, developing, and ope rating p ublic and pr i vate interne ts and intranets . Y o ...

  • Cisco Systems 2940 - page 18

    xviii Catalyst 2940 Swi tch Hardware In stallation Guid e OL-6157-01 Preface Obtainin g Addi tional Pub lications and Informat ion ...

  • Cisco Systems 2940 - page 19

    C HAPTER 1-1 Catalyst 2940 Switch Hardware Installation Gui de OL-6157-01 1 Overview This ch apter pro vides information about these topics: • Setting up the Switch, page 1-1 • Feat ures , page 1- 1 • Front-Panel Descri ption, pa ge 1-2 • Rear-Panel De script ion, pa ge 1-9 • Managem ent Options, page 1-11 Setting up the Switch See the Ca ...

  • Cisco Systems 2940 - page 20

    1-2 Catalyst 2940 Swi tch Hardware In stallation Guid e OL-6157-01 Ch apter 1 Over vi ew Front-Pa nel De scripti on • Conf iguration – Supports manu al and autoc onfiguratio n for 10/100 port s – Supports manu al con figuration at 10 or 10 0 Mbp s for 10/100/ 1000 port ( full d uplex onl y at 1000 Mbps) – Supports only 100 Mbps and full dup ...

  • Cisco Systems 2940 - page 21

    1-3 Catalyst 2940 Switch Hardware Installation Gui de OL-6157-01 Chapter 1 Ov erview Front -Panel Descr iption Port Numberin g Ta b l e 1 - 1 lists the port and slot numb ering for the Catalyst 2940 switch es. 10/100 P orts The 10/ 100 ports use RJ-45 conn ectors and t wisted- pair cab ling. T he po rts can c onne ct to t hese devices: • 10BASE-T ...

  • Cisco Systems 2940 - page 22

    1-4 Catalyst 2940 Swi tch Hardware In stallation Guid e OL-6157-01 Ch apter 1 Over vi ew Front-Pa nel De scripti on Note Whe n connec ting the sw itch to a 1000 B ASE-T device, be sure to use a fou r twiste d-pair, Cate gory 5 cable . Note When connecti ng the swi tch to work stations , serv ers, and router s, be sure to u se a twisted- pair straig ...

  • Cisco Systems 2940 - page 23

    1-5 Catalyst 2940 Switch Hardware Installation Gui de OL-6157-01 Chapter 1 Ov erview Front -Panel Descr iption SFP Modu les The Catalyst 2940-8TF-S switch uses a field-repl aceable SFP module to establish Gi gabit connections. Y ou insert an SFP module into the SFP mo dule slot on the f ront of the switch. The Cisco SFP module s that are s upporte ...

  • Cisco Systems 2940 - page 24

    1-6 Catalyst 2940 Swi tch Hardware In stallation Guid e OL-6157-01 Ch apter 1 Over vi ew Front-Pa nel De scripti on The Cisco CWDM SFPs operate on single-mode f iber . The SFPs support both Gigabit Ethernet as well as fiber channel (1 Gigabit and 2 Gig abit) links. For more i nformation about Cisco CWDM SFPs, see the Cisco CWDM SFP Com patibility M ...

  • Cisco Systems 2940 - page 25

    1-7 Catalyst 2940 Switch Hardware Installation Gui de OL-6157-01 Chapter 1 Ov erview Front -Panel Descr iption All of the LED s descri bed in this sec tion ar e visible through the GUI managem ent appl ications— the Network Assist ant app licatio n for mu ltiple switche s and t he device mana ger fo r a single sw itch. The switch so ftware con fi ...

  • Cisco Systems 2940 - page 26

    1-8 Catalyst 2940 Swi tch Hardware In stallation Guid e OL-6157-01 Ch apter 1 Over vi ew Front-Pa nel De scripti on T able 1 -6 Meaning o f Por t LED Colors in Diff erent M odes Port Mod e Color Meaning ST A T Off No link. Solid gree n Link prese nt. Flashing gre en Activity . Port is sending or rec eiving data. Alternatin g green- ambe r Link faul ...

  • Cisco Systems 2940 - page 27

    1-9 Catalyst 2940 Switch Hardware Installation Gui de OL-6157-01 Chapter 1 Ov erview Rear-P anel Descr iption Rear-Panel Descrip tion The rear panel of the switche s, as shown in Figure 1-4 , have an AC power connec tor and an R J-45 console port. Figur e 1 -4 Catalyst 29 40 Switc h Rear P anel Powe r Conne ctor Y o u provide power to a swi tch by ...

  • Cisco Systems 2940 - page 28

    1-10 Catalyst 2940 Swi tch Hardware In stallation Guid e OL-6157-01 Ch apter 1 Over vi ew Rear-Panel Descr iption Console P ort Y o u can co nnect a swi tch to a PC throu gh the conso le port by using a RJ-45-to-D B-9 adap ter cable . If you want t o con nect a switc h to a term inal, you ne ed t o provide an RJ-4 5-to- DB-25 fema le DTE adap ter . ...

  • Cisco Systems 2940 - page 29

    1-11 Catalyst 2940 Switch Hardware Installation Gui de OL-6157-01 Chapter 1 Ov erview Manageme nt Options Management Options Catalyst 2940 swi tches offer these manage ment o ptions: • Network Assistant The Networ k Assistant is a GUI-based ap plicat ion that you can instal l and run on your deskto p; you do not need a web b rowser to run it. Y o ...

  • Cisco Systems 2940 - page 30

    1-12 Catalyst 2940 Swi tch Hardware In stallation Guid e OL-6157-01 Ch apter 1 Over vi ew Managem ent Opt ions ...

  • Cisco Systems 2940 - page 31

    C HAPTER 2-1 Catalyst 2940 Switch Hardware Installation Gui de OL-6157-01 2 Installation This chapte r describes ho w to install your switch, ho w to interpret the po wer-o n self-test (POST) , and how to connec t the switch to oth er devices. R ead these to pics, a nd pe rform t he pr ocedur es in t his o rder: • Preparin g for In stallation, p ...

  • Cisco Systems 2940 - page 32

    2-2 Catalyst 2940 Swi tch Hardware In stallation Guid e OL-6157-01 Chapter 2 Installation Prepar ing for Inst allat ion War ni n g Do not stack the chassis on any other equipment. If t he chassis falls, it can cause severe bodily injury and equipment da mage. Statement 48 War ni n g The plug-socket combination must be ac cess ible at all times, bec ...

  • Cisco Systems 2940 - page 33

    2-3 Catalyst 2940 Switch Hardware Installation Gui de OL-6157-01 Chapter 2 Installation Preparing for Installation Installation Guidelines When dete rmining wh ere to place the switch, ob serv e these guid elines. • Before installi n g the switch , f irst v erify that the s witch is oper ational b y po wering it on and run ning POST . Follo w the ...

  • Cisco Systems 2940 - page 34

    2-4 Catalyst 2940 Swi tch Hardware In stallation Guid e OL-6157-01 Chapter 2 Installation Verifying Sw itch Op eration • Re gulato ry Complian ce and Safe ty Inform ation for th e Catalyst 2940 Switch (order num ber DOC -781665 6=) • Product owners hip registration card If you want to con nect a termi nal to the switch conso le port, you ne ed ...

  • Cisco Systems 2940 - page 35

    2-5 Catalyst 2940 Switch Hardware Installation Gui de OL-6157-01 Chapter 2 Installation Install ing the Switch Installing the Switch Y ou ca n i ns ta ll th e switc h on or und er a d esk or on a wa ll. Be fore you begin t he i nstallat ion, deci de w her e to mount the switch b y rev iewi n g the illustrations in these sec tion s: • “Installin ...

  • Cisco Systems 2940 - page 36

    2-6 Catalyst 2940 Swi tch Hardware In stallation Guid e OL-6157-01 Chapter 2 Installation Instal ling the Swi tch Figur e 2-1 In stalling the Mounting Scr ews on T op of a Des k Step 3 Peel the adhesi ve strip of f the bottom of the scre w template, an d attach it to the top of the desk. Step 4 Use a 0.144 -inch (3. 7 mm) or a #27 drill bit to dril ...

  • Cisco Systems 2940 - page 37

    2-7 Catalyst 2940 Switch Hardware Installation Gui de OL-6157-01 Chapter 2 Installation Install ing the Switch Step 7 Place the switch onto the moun ting screw s and slide the swi tch forwar d until it locks in place, as show n in Figu re 2-2 . Figur e 2-2 Mo unting the S witch on T op of a Desk Installing the Switch Under a Desk Foll ow these step ...

  • Cisco Systems 2940 - page 38

    2-8 Catalyst 2940 Swi tch Hardware In stallation Guid e OL-6157-01 Chapter 2 Installation Instal ling the Swi tch Figur e 2-3 In stalling the Mounting Scr ews Unde r a Desk Step 3 Peel th e ad hesiv e stri p off the b ottom of the screw templa te, and atta ch it to the under side of the desk. Step 4 Use a 0.144 -inch (3. 7 mm) or a #27 drill bit to ...

  • Cisco Systems 2940 - page 39

    2-9 Catalyst 2940 Switch Hardware Installation Gui de OL-6157-01 Chapter 2 Installation Install ing the Switch Step 7 Place the switch onto the moun ting screw s and slide the swi tch forwar d until it locks in place, as show n in Figu re 2-4 . Figur e 2-4 Mo unting the S witch Unde r a Desk Installing the Switch on a Wall Foll ow the steps i n thi ...

  • Cisco Systems 2940 - page 40

    2-10 Catalyst 2940 Swi tch Hardware In stallation Guid e OL-6157-01 Chapter 2 Installation Instal ling the Swi tch Figur e 2-5 In stalling the Mounting Scr ews on a W all Step 3 Peel the adhesi ve strip of f the bottom of the screw temp late. Step 4 Attach the screw t em plate to the w a ll. Step 5 Use a 0.144 -inch (3. 7 mm) or a #27 drill bit to ...

  • Cisco Systems 2940 - page 41

    2-11 Catalyst 2940 Switch Hardware Installation Gui de OL-6157-01 Chapter 2 Installation Install ing the Switch Step 8 Place the switc h onto the mounting scre ws and slide it do wn until it locks in place , as shown in Figu re 2-6 . Figur e 2-6 In stalling the S witch On a W all 1 Switch 2 Scre w 3 Slides on this way 3 1 2 2 2 89855 ...

  • Cisco Systems 2940 - page 42

    2-12 Catalyst 2940 Swi tch Hardware In stallation Guid e OL-6157-01 Chapter 2 Installation Connecting t o an SFP Modul e Installing the Switch (Magnet Mount) T o mount a switch by using the magnet, follo w these steps: Step 1 Place one side o f the magn et against the bottom of th e switch, a s sho wn in Figure 2-7 Figur e 2-7 Mo unting the Switc h ...

  • Cisco Systems 2940 - page 43

    2-13 Catalyst 2940 Switch Hardware Installation Gui de OL-6157-01 Chapter 2 Installation Connecting to an SFP Module Note Refer to the release notes for the latest inform ation about SFP modules supported by the swi tch. Foll ow these steps to connect a fiber -op tic cable to an SFP module: Step 1 Remove the rubber plugs fr om the modu le port a nd ...

  • Cisco Systems 2940 - page 44

    2-14 Catalyst 2940 Swi tch Hardware In stallation Guid e OL-6157-01 Chapter 2 Installation Conne cting to 10/ 100 Ports and the 10/100/10 00 Port Connecting to 10/100 Port s and the 10/100/1000 Port The 10/1 00 ports configure themsel ves to operate a t the speed an d duplex setti ngs of attach ed devices.They ope rate at 10 or 100 Mbps in h alf- o ...

  • Cisco Systems 2940 - page 45

    2-15 Catalyst 2940 Switch Hardware Installation Gui de OL-6157-01 Chapter 2 Installation Conne ctin g to t he 10 0BA SE- FX P ort Step 2 Insert th e othe r ca ble end int o an RJ-45 connec tor on the target device. Step 3 Obser ve th e port sta tus LED. The LED turns gree n when the switch and the target device ha ve an establis hed link. The LED t ...

  • Cisco Systems 2940 - page 46

    2-16 Catalyst 2940 Swi tch Hardware In stallation Guid e OL-6157-01 Chapter 2 Installation Connecting t o an SFP Modul e Step 4 Obser ve th e port sta tus LED. The LED turns gree n when the switch and the target device ha ve an establis hed link. The LED turns ambe r while Spa nning Tree Protocol (ST P) disc ove rs the ne twork top ology and sear c ...

  • Cisco Systems 2940 - page 47

    2-17 Catalyst 2940 Switch Hardware Installation Gui de OL-6157-01 Chapter 2 Installation Where t o Go Next The LED turns gree n when the switch and the target device ha ve an establis hed link. The LED turns ambe r while the STP discovers the network topol ogy and sear ches fo r loops. Thi s process takes about 30 se conds, and then the po rt LED t ...

  • Cisco Systems 2940 - page 48

    2-18 Catalyst 2940 Swi tch Hardware In stallation Guid e OL-6157-01 Chapter 2 Installation Where to Go Nex t ...

  • Cisco Systems 2940 - page 49

    C HAPTER 3-1 Catalyst 2940 Switch Hardware Installation Gui de OL-6157-01 3 Troubleshooting The front -pan el LED s provide troub leshooti ng inform ation about the switch. They show power -on self-te st (POS T) failu res, port-c onnect ivity proble ms, and overall sw itch p erfor mance. For a f ull descript ion of the L EDs, se e the “LEDs” se ...

  • Cisco Systems 2940 - page 50

    3-2 Catalyst 2940 Swi tch Hardware In stallation Guid e OL-6157-01 Chapter 3 Trouble shooti ng Diagno sing Com mon Problem s T able 3-1 Common Connectivity Pro blems and Their Solution s Symp tom Possibl e Caus e Resolu tion No conne ctivity to 10/ 100 ports or 10/100/ 1000 port. Inco rrect or b ad ca ble. • Remo ve and re conne ct cable to switc ...

  • Cisco Systems 2940 - page 51

    3-3 Catalyst 2940 Switch Hardware Installation Gui de OL-6157-01 Chapter 3 Troubleshoot ing Di agno sin g Comm on Pr oblems No connectivity to SFP module. • The SFP m odule was installe d after the switch was po w ered on. Note By de fault, the 100BASE-FX port is enabled and the SFP module slot is disabled if an SFP module is not already installe ...

  • Cisco Systems 2940 - page 52

    3-4 Catalyst 2940 Swi tch Hardware In stallation Guid e OL-6157-01 Chapter 3 Trouble shooti ng Diagno sing Com mon Problem s T able 3-2 P oor P erfor mance Pr oblems and Their Sol utions Symp tom Possibl e Caus e Resolu tion Poo r perf ormance or ex cessiv e erro rs. Duplex autonegotia tion mismatch . See th e switch softw a re configurati on guide ...

  • Cisco Systems 2940 - page 53

    3-5 Catalyst 2940 Switch Hardware Installation Gui de OL-6157-01 Chapter 3 Troubleshoot ing Di agno sin g Comm on Pr oblems T able 3-3 Cor r upted Sof twar e Pr oblems and Their Solutions Symp tom Possibl e Caus e Resolu tion System LED is amber , and all port LEDs are off . Corrupted software. Attach a mon itor to the serial port to display the sw ...

  • Cisco Systems 2940 - page 54

    3-6 Catalyst 2940 Swi tch Hardware In stallation Guid e OL-6157-01 Chapter 3 Trouble shooti ng Diagno sing Com mon Problem s ...

  • Cisco Systems 2940 - page 55

    A- 1 Catalyst 2940 Switch Hard wa re Installation Gui d e OL-6157-01 APPEND IX A Technical Specifications Ta b l e A - 1 t hrough Ta b l e A - 3 li st the technical specif ications for the Catal yst 2940 switch es. T able A -1 T echn ical Specifications f or Catalyst 2940 S witches Enviro nmenta l Ranges Operat ing temp eratu re 32 to 1 13° F ( 0 ...

  • Cisco Systems 2940 - page 56

    A- 2 Catalyst 2940 Swi tch Hardware In stallation Guid e OL-6157-01 Appendi x A Technical Speci fication s T able A -2 F iber -Optic P ort Sp ecifications for Cata lyst 2950-8 TF-S witch Fiber -Port Power Levels 100BASE-FX po rt SFP module slot 1 1. SFP-dep endent Optical transmitte r wa velength 1300 nm 2 2. nm = nanom ete rs — Optical recei ver ...

  • Cisco Systems 2940 - page 57

    A-3 Catalyst 2940 Switch Hard wa re Installation Gui d e OL-6157-01 Append ix A Technical Spec ification s EN61000- 4-11/IE C1000- 4-11: I mmunity to V oltage Dips, V ol tage V ariatio ns, and Short V olta ge Interrupt ions AS/NZS 35 48, Class A BSMI, Class A VCCI, Class A MIC M ark T able A -3 Ca talyst 29 40 Swi tch Ag ency App ro v als (continue ...

  • Cisco Systems 2940 - page 58

    A- 4 Catalyst 2940 Swi tch Hardware In stallation Guid e OL-6157-01 Appendi x A Technical Speci fication s ...

  • Cisco Systems 2940 - page 59

    B-1 Catalyst 2940 Switch Hard wa re Installation Gui de OL-6157-01 APPEND IX B Connecto rs and Cable s This a ppend ix descri bes th e conne ctors, cabl es, and adapt ers th at you use to conn ect th e sw itch to other devices. Connector Specific ations These sections describ e the connectors used with the Cataly st 2940 switches and contains this ...

  • Cisco Systems 2940 - page 60

    B-2 Catalyst 2940 Swi tch Hardware In stallation Guid e OL-6157-01 Appendi x B Connector s and Cables Connecto r Specificati ons Figur e B-2 1 0/1 00 RJ-45 Pinouts When co nnectin g 10/ 100 port s to ot her devices, such as servers, workst ations, and routers, y ou ca n use a two or four twist ed-p air , straigh t-thro ugh cable wir ed for 10BASE-T ...

  • Cisco Systems 2940 - page 61

    B-3 Catalyst 2940 Switch Hard wa re Installation Gui de OL-6157-01 Append ix B Connectors and Cables Connec tor Specif icati ons 10/100/1 000 Ports The 10/1 00/1000 Et hernet port on the Catal yst 2940-8T T -S switch use s a standard RJ-45 conn ector . Figure B-3 shows the pinout. Figur e B-3 RJ-45 Pinou ts for 1 0/1 00/1 00 0 Por t Connecting to 1 ...

  • Cisco Systems 2940 - page 62

    B-4 Catalyst 2940 Swi tch Hardware In stallation Guid e OL-6157-01 Appendi x B Connector s and Cables Connecto r Specificati ons 100BASE-FX Port The 100BASE-FX port o n the Catal yst 2940 8TF- S uses an MT -RJ c onnector, sho wn in Figure B-4 . Th is port uses 50/ 125- or 62.5 /125- micron multimod e fiber-optic cabling . Y o u can co nnect a 10 0B ...

  • Cisco Systems 2940 - page 63

    B-5 Catalyst 2940 Switch Hard wa re Installation Gui de OL-6157-01 Append ix B Connectors and Cables Cable and Adapter Specif ications Console P ort The c onsol e port uses an 8-pin RJ-45 c onnect or . Y ou c an co nnect a switc h to a PC thro ugh the console port and the supplied RJ-45-t o-DB -9 adap ter cable . If you want to co nnect a sw itch t ...

  • Cisco Systems 2940 - page 64

    B-6 Catalyst 2940 Swi tch Hardware In stallation Guid e OL-6157-01 Appendi x B Connector s and Cables Cable and A dapter Spec ifications Four Twis ted-Pa ir Cable Pin outs for 1 0/100 Ports Figure B-8 and Figur e B-9 sh ow the schem atics of four t wist ed-pair cable s for 10/100 ports. Figur e B-8 Fou r T w ist ed-P air Straight-Thr ough Cable Sc ...

  • Cisco Systems 2940 - page 65

    B-7 Catalyst 2940 Switch Hard wa re Installation Gui de OL-6157-01 Append ix B Connectors and Cables Cable and Adapter Specif ications Four Twis ted-Pa ir Cable Pin outs for 1 000BA SE-T Ports Figure B-1 0 and Figure B-11 show the schema tics of fou r twisted -pair ca bles for the 10/100/1 000 port . Figur e B-1 0 Fou r T wisted-P air Straight-Th r ...

  • Cisco Systems 2940 - page 66

    B-8 Catalyst 2940 Swi tch Hardware In stallation Guid e OL-6157-01 Appendi x B Connector s and Cables Cable and A dapter Spec ifications Cable and Adap ter Pino uts This sect ion descri bes the ca ble and adapter p inouts an d also descri bes how to identify a rol lover cable. Connecting to a PC Use t he sup plied RJ- 45-t o-DB-9 adap ter c able to ...

  • Cisco Systems 2940 - page 67

    B-9 Catalyst 2940 Switch Hard wa re Installation Gui de OL-6157-01 Append ix B Connectors and Cables Cable and Adapter Specif ications Identifying a Rollover Cable Y o u can iden tify a rol lover cable, al so known as a “crossover” cabl e, by compari ng the two modul ar cable end s. Hol d the cabl e ends side-by-side, w ith the tab at the ba ck ...

  • Cisco Systems 2940 - page 68

    B-10 Catalyst 2940 Swi tch Hardware In stallation Guid e OL-6157-01 Appendi x B Connector s and Cables Cable and A dapter Spec ifications ...

  • Cisco Systems 2940 - page 69

    C-1 Catalyst 2940 Switch Hard wa re Installation Gui d e OL-6157-01 APPEND IX C Configuring the Switch with the CLI-Based Setup Program This ap pendi x provides a com mand-l ine in terface (C LI)-b as ed setup proce dure for a st andal one swi tch. This chap ter cont ains these sections: • Meth ods fo r Acces sing the CLI , page C- 1 • T aking ...

  • Cisco Systems 2940 - page 70

    C-2 Catalyst 2940 Swi tch Hardware In stallation Guid e OL-6157-01 Appendix C Configuring the Switch with the CLI-Based Setup Program Taking Out W hat Y ou Ne ed After you ha ve entered the conf iguration information for the switc h, sav e it to flash memory b y using the wri te memory privileged EXEC command . Note While in Express Setup mode, the ...

  • Cisco Systems 2940 - page 71

    C-3 Catalyst 2940 Switch Hard wa re Installation Gui d e OL-6157-01 Append ix C Configuring the Swi tch with the CLI -Based Se tup Program Connecting to a Power Source Connecting to a Powe r Source Foll ow these steps to connect to a power source: Step 1 Connect one end of the supp lied AC po w er cord t o the power conne ctor on th e switch re ar ...

  • Cisco Systems 2940 - page 72

    C-4 Catalyst 2940 Swi tch Hardware In stallation Guid e OL-6157-01 Appendix C Configuring the Switch with the CLI-Based Setup Program Starting the Terminal Emu lation Softwa re Figur e C-3 Connecting a S witch to a PC Step 2 Attach the D B-9 fem ale DTE of the ada pter ca ble t o the se rial port o f a PC, or attach an appr opriat e adapter to the ...

  • Cisco Systems 2940 - page 73

    C-5 Catalyst 2940 Switch Hard wa re Installation Gui d e OL-6157-01 Append ix C Configuring the Swi tch with the CLI -Based Se tup Program Entering the Initial Configuration Information Step 3 Conf igure the bau d rate and char acter format of the PC or te rminal to ma tch these co nsole p ort def ault char act eris tics : • 9600 bau d • 8 data ...

  • Cisco Systems 2940 - page 74

    C-6 Catalyst 2940 Swi tch Hardware In stallation Guid e OL-6157-01 Appendix C Configuring the Switch with the CLI-Based Setup Program Completing t he Setup Progra m Completing the Setup Program Foll ow these steps to complete the setup prog ram and to create an initial con figur ation for the switch: Step 1 Enter Ye s at the se two prompt s. Would ...

  • Cisco Systems 2940 - page 75

    C-7 Catalyst 2940 Switch Hard wa re Installation Gui d e OL-6157-01 Append ix C Configuring the Swi tch with the CLI -Based Se tup Program Completing the Setup Program Step 9 Ente r Y to conf igure the switc h as the c luster c ommand switch. Enter N to conf igure it as a memb er swit ch or as a s tandalone switch. If you ente r N , th e swi tch ap ...

  • Cisco Systems 2940 - page 76

    C-8 Catalyst 2940 Swi tch Hardware In stallation Guid e OL-6157-01 Appendix C Configuring the Switch with the CLI-Based Setup Program Where to Go Nex t Where to Go Next After you co mplet e the setup pr ogram , the switc h can run th e default con figuration th at you creat ed. • For produc t overview informa tion, see Chapter 1, “Ov ervie w .? ...

  • Cisco Systems 2940 - page 77

    IN-1 Catalyst 2940 Switch Hard wa re Installation Gui d e OL-6157-01 INDEX Numerics 10/100/10 00 ports cable l ength s 3-3 connec ting t o 3-14 to 3-15 conn ectors and cables B-3 describe d 2-3 to 2-4 10/100 por ts cable l ength s 3-3 connec ting t o 3-14 to 3-15 conn ectors and cables B-1 to B-2 describe d 2-3 illustrated 2-2 100BASE- FX ports cab ...

  • Cisco Systems 2940 - page 78

    Index IN-2 Catalyst 2940 Switch Hardware Installation Gui de OL-6157-01 CLI 2-11 accessin g by using Express Set up D-1 accessin g throu gh co nsole p ort D-2 comm and-l ine i nte rfac e See CLI config urati on exam ples , network 2-1 config uring port s 3-17 connect ing to 10/ 100/100 0 ports 3-14 to 3-15 to 10 /10 0 por ts 3-14 to 3-15 to 100B AS ...

  • Cisco Systems 2940 - page 79

    Inde x IN-3 Catalyst 2940 Switch Hard wa re Installation Gui d e OL-6157-01 G ground connec tion warning 3-2 ground ed equi pmen t warni ng 3-2 H HP OpenView 2-11 humidity A-1 I installati on conn ecting to a p ower sour ce D-3 guideline s 3-3 magnet mou nt 3-12 mounting on a desk (w ith mounting screws) 3-5 to 3-7 mounting on a desk (w ithou t mou ...

  • Cisco Systems 2940 - page 80

    Index IN-4 Catalyst 2940 Switch Hardware Installation Gui de OL-6157-01 P pack age co ntent s 3-3 to 3-4 patch cables , MT-RJ 2-4 PC, connecti ng to switc h B- 8 perform ance p roblem s, sol ving 4-4 physica l dimen sions A-1 pinouts 10/100/10 00 ports B-3 10/100 por ts B-2 adap ter s DB-25 B-9 console port DB-25 adap ter B-9 RJ-45-to -DB-9 adapt e ...

  • Cisco Systems 2940 - page 81

    Inde x IN-5 Catalyst 2940 Switch Hard wa re Installation Gui d e OL-6157-01 connec tivity proble ms 4-2 pinout four twist ed-pai r, 10/10 0 ports B-6 four twiste d-pair , 1000BASE- T ports B- 7 two twisted-pair B-5 Sun Net Mana ger 2-11 switch front pan el 2-2 system LED 2-7 T techni cal assist ance xv to xvi techni cal specific ations A-1 t o A-2 ...

  • Cisco Systems 2940 - page 82

    Index IN-6 Catalyst 2940 Switch Hardware Installation Gui de OL-6157-01 ...

Manufacturer Cisco Systems Category Switch

Documents that we receive from a manufacturer of a Cisco Systems 2940 can be divided into several groups. They are, among others:
- Cisco Systems technical drawings
- 2940 manuals
- Cisco Systems product data sheets
- information booklets
- or energy labels Cisco Systems 2940
All of them are important, but the most important information from the point of view of use of the device are in the user manual Cisco Systems 2940.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Cisco Systems 2940, service manual, brief instructions and user manuals Cisco Systems 2940. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Cisco Systems 2940.

A complete manual for the device Cisco Systems 2940, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Cisco Systems 2940 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Cisco Systems 2940.

A complete Cisco Systems manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Cisco Systems 2940 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Cisco Systems 2940, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Cisco Systems 2940, that we can find in the current document
3. Tips how to use the basic functions of the device Cisco Systems 2940 - which should help us in our first steps of using Cisco Systems 2940
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Cisco Systems 2940
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Cisco Systems 2940 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Cisco Systems 2940?

Use the form below

If you did not solve your problem by using a manual Cisco Systems 2940, ask a question using the form below. If a user had a similar problem with Cisco Systems 2940 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)