Manual Univex PRV-LX1

104 pages 28.89 mb
Download

Go to site of 104

Summary
  • Univex PRV-LX1 - page 1

    DVD recorder PRV-LX1 Operating Instructions ...

  • Univex PRV-LX1 - page 2

    2 PRV -LX1 En For pluggable Equipment, The Socket-Outlet Shall Be Installed Near The Equipment and Shall Be Easily Accessible. DANGER – VISIBLE AND INVISIBLE LASER RADIA TION WHEN OPEN. A VOID DIRECT EXPOSURE TO BEAM. W ARNING – TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. D1-4-2-1_En The exclamation point ...

  • Univex PRV-LX1 - page 3

    3 PRV -LX1 En Confirm Supplied Accessories Remote control unit (1) AA batteries (2) Air filter replacements set (1) READ INSTRUCTIONS — All the safety and operating instructions should be read before the product is operated. RET AIN INSTRUCTIONS — The safety and operating instructions should be retained for future reference. HEED WARNINGS — A ...

  • Univex PRV-LX1 - page 4

    4 PRV -LX1 En Contents IMPORT ANT SAFETY INSTRUCTIONS ...... 2 Precautions .................................................. 5 Preparations for Use: Basic Information ... 8 Features ..................................................... 11 Example of System Composition and Recording Component Setup ............... 12 Names of Parts ................ ...

  • Univex PRV-LX1 - page 5

    5 PRV -LX1 En Precautions Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly . 7 Care must be taken not to infringe copyright restrictions under the laws of each country . If this device is used to record copyrighted materials, approval must be obtained fro ...

  • Univex PRV-LX1 - page 6

    6 PRV -LX1 En Precautions Data Protection in Event of Power Failure While operating this unit, if a power failure occurs, the main power switch is turned OFF , the power cord is disconnected, or other interruption in AC power occurs, the data recorded on the HDD and DVD may be lost. T o prevent such untoward occurrences, we recommend that this unit ...

  • Univex PRV-LX1 - page 7

    7 PRV -LX1 En Precautions Cleaning Care of the Unit ∞ Normal cleaning should consist of dry wiping the unit with a soft cloth. In the event of severe soiling, make a dilution of 1 part neutral deutergent in 5 or 6 parts water . Dip a soft cloth in the solution and wring well, then wipe away the dirt, followed by a gentle wiping with a soft dry cl ...

  • Univex PRV-LX1 - page 8

    8 PRV -LX1 En Preparations for Use: Basic Information About DVD-R / DVD-RW Discs ∞ The DVD-R/RW (video mode) discs recorded on this unit can be finalized (see page 43) to allow them to be played* on other standalone DVD players, automobile DVD players, or DVD players installed in computers. Some players, however , may exhibit the following sympto ...

  • Univex PRV-LX1 - page 9

    9 PRV -LX1 En 1: English (5.1ch Surround) 2: Spanish (2ch Surround) 1: English 2: Spanish Scope Size NTSC 1 2 3 4 5 DVD disc box information When you buy a DVD-Video in the shops, the back of the disc box usually contains various information about the contents of the disc. Below is an example, with an explanation of each section. 1 Audio languages ...

  • Univex PRV-LX1 - page 10

    10 PRV -LX1 En Front left speaker Front right speaker Front left speaker Front right speaker Right surround speaker Left Surround speaker Center speaker Front left speaker Front right speaker Right surround speaker Left Surround speaker Center speaker Sub-woofer “ 0.1 ” refers to the specialized low-frequency sound of this channel. As a result, ...

  • Univex PRV-LX1 - page 11

    11 PRV -LX1 En Features [Product Introduction] The PRV -LX1 (single-DVD-drive/twin-DVD-drive) is a DVD recorder developed by Pioneer for dedicated use in DVD-Video production. The broad range of interface supports built into the PR V -LX1 allows the input of professional mastering media (tapes) using professional component *1 video signals. One of ...

  • Univex PRV-LX1 - page 12

    12 PRV -LX1 En Writer 1 Output Board (optional) Input Board (optional) Writer 2 Video Monitor Keyboard/mouse (USB connector) HDD (USB connector) Internal HDD REC monitor / GUI display Note: Note: Supported discs: DVD-R (general use), DVD-RW * (Must be purchased separately) At present, GUI is not output from the VGA (GUI) output connectors. * (Must ...

  • Univex PRV-LX1 - page 13

    13 PRV -LX1 En 7 Regarding Recording T ime Recording to Hard Disk Drive = About 23-100 hours * The capacity of the hard disk drive usable for recording is about 100 GB; continuous recording can be performed until no more capacity remains, or up to a maximum of 100 hours. Recording to disc media = About 1-6 hours Disc Recording T imes • When creat ...

  • Univex PRV-LX1 - page 14

    14 PRV -LX1 En Front Panel Facilities Names of Parts No. 1 2 3 4 5 6 7 8 9 Name ST ANDBY/ON button Display sections PLA Y/REC indicator DISC indicator EJECT button ( 0 ) Drive 2 cosmetic panel DVD1, DVD2, HDD (Hard disk Drive) indicators DRIVE SELECT button PREVIEW button Function When the unit is in the standby condition, pressing this button caus ...

  • Univex PRV-LX1 - page 15

    15 PRV -LX1 En Names of Parts No. 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 Name STOP button ( 7 ) PLA Y button ( 3 ) P AUSE button ( 8 ) REC button ( ¶ ) MOUSE/KEYBOARD connectors STEP FWD button ( E ) STEP REV button ( e ) SCAN/SKIP FWD button ( ¡ / ¢ ) SCAN/SKIP REV button ( 1 / 4 ) ENTER button CURSOR buttons ( 5 , 3 , ∞ , 2 ) Fil ...

  • Univex PRV-LX1 - page 16

    16 PRV -LX1 En Names of Parts Rear Panel Facilities SIGNAL GND 19 20 12 3 4 5 6 7 8 9 1 0 11 12 13 14 15 16 17 18 No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Name AC IN connector Main power switch AUDIO CH1/L CH2/R IN/OUT connectors S-VIDEO IN/OUT connectors COMPOSITE VIDEO IN/OUT connectors COMPONENT VIDEO IN/OUT connectors DV connector ...

  • Univex PRV-LX1 - page 17

    17 PRV -LX1 En Names of Parts *1 Inputs are compatible with signal levels for both BET A and SMPTE (NTSC only). However , since outputs are based on DVD format, they differ from BET A and SMPTE levels. As a result, outputs should be used only for monitoring. See page 34 for input selection methods. *2 L TC is not supported in drop frame mode. *3 SO ...

  • Univex PRV-LX1 - page 18

    18 PRV -LX1 En V ideo Clip Management and Disc Authoring Procedure When recording to either disc or hard disk drive (HDD), the PRV -LX1 manages the video recording clips by units of “project.” When creating a disc from clips recorded on HDD, this project unit is used to perform the disc recording. A project is composed of individual recorded vi ...

  • Univex PRV-LX1 - page 19

    19 PRV -LX1 En Basic Operations [Operation] The various operating settings are performed using the buttons on the main unit ’ s front panel, as well as the remote control unit and optional mouse/ keyboard. 7 Operations using remote control unit The furnished remote control unit has been designed primarily for video playback control, including emu ...

  • Univex PRV-LX1 - page 20

    20 PRV -LX1 En Basic Operations [Function Menu] Setting operations are performed on this unit via a dedicated graphical user interface (GUI) called the “ Function Menu ” . ST A TUS section EDIT section APP section SET UP section Function Menu (T op Menu) Second sub-menu Third sub-menu Currently selected drive First sub-menu Back button (return ...

  • Univex PRV-LX1 - page 21

    21 PRV -LX1 En PLAY PAUSE DISPLAY REPEAT AUDIO SCAN STEP RPT A-B ANGLE SUBTITLE PREV NEXT SETUP ENTER RETURN SEARCH CLEAR 12 3 456 7 8 9 01 0 > TITLE/CHP FRM/TIME MENU SETUP TOP MENU FRM/TIME STOP DXX2527 2 Press the remote control unit ’ s SETUP button 3 Using the mouse to display and access the playback control bar . Press both right and lef ...

  • Univex PRV-LX1 - page 22

    22 PRV -LX1 En Functions [Main Unit Setting Functions] 7 System Settings (Operation Details: page 29) • These items allow setting of mouse and keyboard, function keys of a keyboard assignments, network settings, and other defaults. Displaying system information and formatting the hard disk can also be performed here. 1 System Setting: Use to perf ...

  • Univex PRV-LX1 - page 23

    23 PRV -LX1 En [Recording Functions] (Operation Details: page 33) • In addition to composite video, S-video, DV and RCA connectors, this unit is equipped with connectors for component video and XLR, thus providing support of connections to professional video components. In this way , RS-422A, IEEE1394, and L TC (linear time code) connectors can b ...

  • Univex PRV-LX1 - page 24

    24 PRV -LX1 En [Editing Functions] (Operation Details: page 62, 67) • When recording to HDD, it is possible to change the name of each of multiple recording data (clips), and editing functions including trimming, chapter editing, clip dividing, and title-order editing can be performed. • DVD disc emulation allows you to check editing results be ...

  • Univex PRV-LX1 - page 25

    25 PRV -LX1 En [Copy , Import, Backup and Restore Functions] (Operation Details: pages 70, 72, 76) 7 Copy • Disc duplication operations have been optimized by the provision a 4x high-speed (maximum) duplication function. • In addition to copying from HDD to DVD-R/RW , duplication of DVD-R/RW discs is also possible. Notes : ∞ Only one image fi ...

  • Univex PRV-LX1 - page 26

    26 PRV -LX1 En Status Confirmation Using Onscreen Display (OSD) By pressing the DISPLA Y button on the unit ’ s front panel or on the remote control unit, the onscreen display (OSD) will be projected on the monitor screen. The OSD permits confirmation of the unit ’ s current setting status, as as well as recording/playback conditions. 7 Idling ...

  • Univex PRV-LX1 - page 27

    27 PRV -LX1 En 7 OSD during Recording When the DISPLA Y button is pressed during recording, the OSD projects the unit ’ s recording status and playback condition (during time shift playback), thus allowing confirmation of these items. In the recording mode, the OSD screen is composed of two pages, a simple (reduced clutter) page, and a detailed i ...

  • Univex PRV-LX1 - page 28

    28 PRV -LX1 En 7 OSD during Playback When the DISPLA Y button is pressed during playback, the OSD projects the unit ’ s playback status, allowing confirmation of these items. In the playback mode, the OSD screen is composed of two pages, a simple (reduced clutter) page, and a detailed information page. The first two times the DISPLA Y button is p ...

  • Univex PRV-LX1 - page 29

    29 PRV -LX1 En System Default Settings Select [ System ] command on the Function Menu ’s SET UP section to select initial defaults for the PRV - LX1. Mouse/Keyboard This DVD recorder supports use of a mouse and keyboard. The types of mouse and keyboard supported are as follows: Mouse: Generic Keyboard: US type (101-key) Japan type (106-key) T o s ...

  • Univex PRV-LX1 - page 30

    30 PRV -LX1 En System Default Settings Network When using this unit on a network, go to SET UP section = [ System ] = [ Network ], and set the [ Network ] command to “ON” . Then go to SET UP section = [ System ] = [ Network ], and set the [ DHCP/Manual ] command either to use DHCP (Dynamic Host Configuration Protocol) or input the IP address us ...

  • Univex PRV-LX1 - page 31

    31 PRV -LX1 En System Default Settings System Information Go to SET UP section = [ System ] = [ Information ] to confirm the following system information: System version (application version / OS version) T otal power -on time (hours) Hard disk drive (HDD) access time (hours) DVD-R/RW Drive read/write time (hours) Service information SET UP section ...

  • Univex PRV-LX1 - page 32

    32 PRV -LX1 En System Default Settings Background Color Go to SET UP section = [ Operation ] = [ V ideo Settings ] = [ Background Color ] to select the background color when the unit is in the idling condition. SET UP section = [Operation] = [Video Settings] = [Background Color] Composite V ideo/Audio RCA Output Signal pass-through is supported on ...

  • Univex PRV-LX1 - page 33

    33 PRV -LX1 En Recording The recording function involves inputting video/audio signals from a VTR or other video playback device ( “ external VTR ” ), converting those signals to data compatible with the DVD video format, and recording that data on the hard disk or a DVD-R/RW disc. A playback video/audio signal is simultaneously output. If the ...

  • Univex PRV-LX1 - page 34

    34 PRV -LX1 En Recording Selecting Input On the Function Menu , the ST A TUS section = [ V Input ] and [ A Input ] commands indicate the currently selected video and audio input signals. Use the CURSOR and ENTER buttons to change to the connectors for different input signals if desired. With either [ V input ] or [ A input ] is designated in “ DV ...

  • Univex PRV-LX1 - page 35

    35 PRV -LX1 En Selecting Recording Destination The currently selected recording destination (also the playback source) will be displayed on the front panel’ s central indicator ( DVD1 , DVD2 , HDD indicator). The [ Drive ] command on the Function Menu ’s ST A TUS section also indicates the currently selected recording destination/playback sourc ...

  • Univex PRV-LX1 - page 36

    36 PRV -LX1 En Other Recording Settings Function Menu ’ s SET UP section = [ Recording ]: This command also allows the following settings: Video Encode Rate: 32 levels Video Filter (NR): 16 levels Audio Encode: Dolby Digital / LPCM (Note1) Audio Level: – 48 dB to +14 dB Aspect: 4:3 / 16:9 Setup Level: 0 IRE / 7.5 IRE (Note2) Auto Chapter: Manua ...

  • Univex PRV-LX1 - page 37

    37 PRV -LX1 En Recording Video Filter Level Setting Use the Video filter to improve image quality when the Video encode rate setting is low or when there is noise in the video source. A higher filter level reduces noise more efficiently but lowers resolution. Set the level where you obtain the greatest amount of noise reduction with the lowest loss ...

  • Univex PRV-LX1 - page 38

    38 PRV -LX1 En Recording Preview Function The PREVIEW button on the front panel, or the SET UP section = [ Recording ] = Preview button makes it possible to check the result of encoding/ decoding of the video/audio input signals without making a recording to DVD discs or hard disks. In the idling condition, press either the PREVIEW button, or on th ...

  • Univex PRV-LX1 - page 39

    39 PRV -LX1 En The APP section = [ Auto Capture ] = [ IN/OUT Point ] = [ Record As ] command allows designation of whether recording enters the REC pause mode, or stops completely when the OUT point is detected. When “ Chapter (Pause) ” is selected, the command also permits the insertion of a chapter mark at that point. When manual chapter mark ...

  • Univex PRV-LX1 - page 40

    40 PRV -LX1 En Recording After construction of an edit list, or after loading a previously recorded edit list, pressing the Function Menu ’ s APP section = [ Auto Capture ] = [ EDL Command ] = EDL REC button will cause recording to be performed automatically in accordance with the constructed list. In accordance with the recorded IN/OUT points, t ...

  • Univex PRV-LX1 - page 41

    41 PRV -LX1 En Recording Editing the Edit List The contents that can be recorded on the edit list with this recorder are as follows: The contents set with the APP section = [ Auto Capture ] = [ IN/OUT Point ] and [ Chapter Point ] commands are added to the edit list by pressing the Add to EDL button. Also, the APP section = [ Auto Capture ] = [ EDL ...

  • Univex PRV-LX1 - page 42

    42 PRV -LX1 En 2 Canceling finalization Finalization can be canceled by selecting the EDIT section = [ DVD Disc ] = [ Unfinalize ] command. The PRV -LX1 can only canceling finalization discs that it has been finalized on the PRV -LX1. Finalization cannot be canceled for two drives simultaneously . Note 1: The DVD menu information is lost when a dis ...

  • Univex PRV-LX1 - page 43

    43 PRV -LX1 En Recording EDIT section = [DVD Disc] = [Unfinalize] = [Unfinalize] Unfinalize confirmation dialog Unfinalize progress bar (appears during unfinalization) Note 2: However , finalization of DVD-RW discs finalized using the initial PRV -LX1 version (prior to 1.12/1.02) cannot be canceled. 3 Removing a disc before finalization A recorded ...

  • Univex PRV-LX1 - page 44

    44 PRV -LX1 En Recording EDIT section = [DVD Disc] = [Finalize] Finalize confirmation dialog Finalize progress bar (appears during finalization) Recording from HDD to DVD Following recording of a video program to the hard disk drive, editing of the DVD menu and title can be performed before final recording to DVD disc. Use the EDIT section = [ DVD ...

  • Univex PRV-LX1 - page 45

    45 PRV -LX1 En Playing Discs When playing discs on this unit, the program on a loaded DVD-Video disc, or the clips recorded as a project on the hard disk drive are played back and the video/audio signals output to all output connectors. However , when playing DVD-Video discs equipped with copy-guard copy protection, playback signals will not be out ...

  • Univex PRV-LX1 - page 46

    46 PRV -LX1 En Playing Discs PLAY PAUSE DISPLAY REPEAT AUDIO SCAN STEP RPT A-B ANGLE SUBTITLE PREV NEXT SETUP ENTER RETURN SEARCH CLEAR 12 3 456 7 8 9 01 0 > TITLE/CHP FRM/TIME MENU TOP MENU FRM/TIME STOP When a DVD disc has been set for fast play , follow the instructions to begin playback automatically upon insertion of the disc. When “DVD1? ...

  • Univex PRV-LX1 - page 47

    47 PRV -LX1 En Playing Discs 7 T o search for a desired scene (SEARCH function) [T itle Direct Search] During playback: 1. Press the TITLE/CHP FRM/TIME button. 2. Use the number buttons to enter the number of the desired title. Example: to select title “ 3 ” Press number button 3 . Example: to select title “ 10 ” Press number buttons 1 = 0 ...

  • Univex PRV-LX1 - page 48

    48 PRV -LX1 En Playing Discs 7 Slow playback During normal playback, hold the STEP / STEP button depressed. During slow playback, the playback speed can be adjusted by pressing the STEP and STEP buttons. SLOWER F ASTER STEP += STEP STEP3 - STEP1 - 1/16 - 1/8 - 1/4 - 1/2 - 1/1 Note 1: No sound is produced during slow playback. Note 2: The slow playb ...

  • Univex PRV-LX1 - page 49

    49 PRV -LX1 En Playing Discs Note 1: During time shift playback, the PLA Y button enable start time will differ depending on the TV system, the video rate and the audio encoding format, as shown in the following table (mm:sec). Note 2: The interval required from the time the PLA Y button is pressed until playback actually begins is about 10 seconds ...

  • Univex PRV-LX1 - page 50

    50 PRV -LX1 En 7 Audio Output Mode [Audio] Use to select the type of digital signal supported by the amplifier connected to the unit. Be sure to set this correctly since incorrect settings may cause the generation of noise. Consult the Operating Instructions for your amplifier when making this setting. Dolby Digital OUT Dolby Digital / Dolby Digita ...

  • Univex PRV-LX1 - page 51

    51 PRV -LX1 En Playing Discs 7 Audio Language Setting [Language] = [Audio] English / Japanese / Others->Next Menu Use to set the audio language to English, Japanese, or Other (Note) . 7 Sub-T itle Selection [Language] = [Subtitle] English / Japanese / Others->Next Menu Use to set sub-titles to English, Japanese, or Other (Note) . 7 DVD Menu L ...

  • Univex PRV-LX1 - page 52

    52 PRV -LX1 En Settings that can be made with the Function Menu ’ s SET UP section = [ Operation ] = [ Video Settings ] command include: External Sync: Enabled/Disabled OSD: Enabled/Disabled Composite OUT : Source Monitor/Decorder Out Background Color: Black/Blue DV OUT : Enabled (Note1) /Disabled ∞ For more information regarding settings for c ...

  • Univex PRV-LX1 - page 53

    53 PRV -LX1 En Black burst signal input First unit Final Unit Second Unit ... Caution: ¶ The external sync function is applicable only to DVD disc playback. ¶ The black burst sub-carrier component is not locked. ¶ During the approximate 5 seconds until the external sync signal is locked, the image at each video output connector will be distorted ...

  • Univex PRV-LX1 - page 54

    54 PRV -LX1 En Regarding Progressive Scan Output This unit allows the output of progressive scan video signals from the component output connector . T o turn progressive scan output ON/OFF , press the controls on the front panel: Press these buttons simultaneously . Note 1: Switching is only possible during idling. Note 2: Be sure the unit is conne ...

  • Univex PRV-LX1 - page 55

    55 PRV -LX1 En DVD Menu Editing This unit is equipped with a number of DVD menu layouts that are selected with the Function Menu ’ s EDIT section = [ DVD Menu ] command, and associated with a recorded image for convenient production of DVD-Video discs. The constructed menu will be the same TV system (NTSC or P AL) as that currently selected. Open ...

  • Univex PRV-LX1 - page 56

    56 PRV -LX1 En DVD Menu Editing DVD Menu Selection When editing a menu, first use the Function Menu ’ s EDIT section = [ DVD Menu ] = [ Menu Design ] = [ Design Select ] command to choose a basic button layout pattern from the DVD menu layout displayed on the screen. Use the 5 / ∞ buttons to select the layout pattern type, the 3 button to chang ...

  • Univex PRV-LX1 - page 57

    57 PRV -LX1 En DVD Menu Editing Button T ext When button text is selected, use the EDIT section = [ DVD Menu ] = [ Menu Design ] = [ Button T ext ] command to select the format from the following choices: T itle (chapter) Number/Name T itle (chapter) Number T itle (chapter) Name No text When name is selected, the name of the clip (chapter) allocate ...

  • Univex PRV-LX1 - page 58

    58 PRV -LX1 En DVD Menu Editing Setting an Idle Clip An idle clip (a clip played automatically after a specified waiting time from the menu display mode) can be set by using the [ DVD Menu ] = [ Navigation Cmd ] = [ Idle Clip ] command on the EDIT section of the Function Menu . The clip is played repeatedly until the ENTER key is pressed to return ...

  • Univex PRV-LX1 - page 59

    59 PRV -LX1 En Customizing the DVD Menu Using the Function Menu ’ s EDIT section = [ DVD Menu ] = [ Menu Modification ] command, it is possible to change the background image and highlight colors of the DVD menu currently being edited. With this unit, a number of background images are used, and when the EDIT section = [ DVD Menu ] = [ Menu Modifi ...

  • Univex PRV-LX1 - page 60

    60 PRV -LX1 En DVD Menu Editing The EDIT section = [ DVD Menu ] = [ Menu Modification ] = [ Disc Name ] command can be used to insert a name (up to 32 characters long) into the DVD menu. The actual number of characters that can be embedded in the menu will differ depending on the menu design. Further , depending on design, excessive characters may ...

  • Univex PRV-LX1 - page 61

    61 PRV -LX1 En DVD Menu Editing DVD Menu Preview With the Function Menu ’ s EDIT section = [ DVD Menu ] command displayed, press the Preview button to display the DVD menu currently being edited. If no recorded image exists corresponding to a button on the DVD menu, no thumbnail will be extracted for that button, and it will instead appear with t ...

  • Univex PRV-LX1 - page 62

    62 PRV -LX1 En T itle Editing / Chapter Editing When recording to hard disk drive, the names given to the multiple recorded image data (clips) can be changed. Other editing processes supported include trimming, chapter editing, clip dividing, and title order editing. DVD disc emulation can also be performed in order to confirm editing results. The ...

  • Univex PRV-LX1 - page 63

    63 PRV -LX1 En T itle Editing / Chapter Editing T itle T rimming When you wish to cut out the first or last part of a clip, or to extract the middle part of a clip, use the Function Menu ’ s EDIT section = [ T itle ] = [ T arget Clip ] command to select the clip you wish to edit, then use the EDIT section ’ s [ T itle ] = [ Editing ] = [ T rimm ...

  • Univex PRV-LX1 - page 64

    64 PRV -LX1 En T itle Editing / Chapter Editing Chapter Editing Select a clip edited with the Function Menu ’ s EDIT section = [ T itle ] = [ T arget Clip ] command; by selecting “ Go T o Video ” on the the EDIT section = [ T itle ] = [ Editing ] = [ Chapter Points ] command, the selected clip ’ s chapter mark position can be changed. EDIT ...

  • Univex PRV-LX1 - page 65

    65 PRV -LX1 En T itle Editing / Chapter Editing T itle Order Edit In the DVD-Video format, the number of possible titles per disc is limited to 99. The projects created on this recorder , however , are capable of managing more than that number of clips. Fundamentally , the title numbers from 1 to 99 correspond to the clips in the order in which the ...

  • Univex PRV-LX1 - page 66

    66 PRV -LX1 En T itle Editing / Chapter Editing Recording to DVD Disc Projects edited on hard disk drive can be recorded to DVD-Video disc by using the EDIT section = [ DVD Disc ] = [ Make Disc ] command. By using the EDIT section = [ DVD Disc ] = [ Make Disc ] = [ T arget ] command, the destination drive used for the recording is designated as “ ...

  • Univex PRV-LX1 - page 67

    67 PRV -LX1 En Project Editing This recorder manages recorded image data (clips) by the unit of “ project. ” A single project can preserve multiple clips, and so long as the project is not changed, the numerous clips are preserved as a continuous series within the project. It is possible to include both NTSC and P AL clips within a single proje ...

  • Univex PRV-LX1 - page 68

    68 PRV -LX1 En Project Editing Copying a Project Using the EDIT section = [ Project ] = [ Copy Project ] command, the currently selected project can be copied to a new project. The project name that automatically appears in the EDIT Section’ s [ Project ] = [ Copy Project ] = [ Copy To ] command will be affixed with a numeral to distinguish it fr ...

  • Univex PRV-LX1 - page 69

    69 PRV -LX1 En Deleting a Project Projects are not automatically deleted, but preserved within the hard disk drive. When the available space on the HDD becomes low , use the EDIT section = [ Project ] = [ Delete ] command to select and delete unneeded projects in order to open up space on the drive. EDIT section = [Project] = [Delete] Note 1: A pro ...

  • Univex PRV-LX1 - page 70

    70 PRV -LX1 En Disc Duplication This unit provides a function for duplicating discs. Disc-to-disc duplication can be performed by connecting another DVD drive. This function can be done on a single drive by creating an image file from a disc and using this file to create a new disc. Image files imported via FTP (uploading) can also be used to creat ...

  • Univex PRV-LX1 - page 71

    71 PRV -LX1 En Disc Duplication Creating Image Files from a Disc Use the Function Menu ’ s APP section = [ Cpy/ Impt/Bkup ] = [ Disc Image Copy ] = [ Source ] command to specify the disc to be used in creating an image file. Use the [ Input Image Name ] command to enter the file name. The file is saved under the entered file name to the imagefile ...

  • Univex PRV-LX1 - page 72

    72 PRV -LX1 En Importing Image Data, Edit Lists This function allows the importing of image data from CD/DVD discs, or a web browser with FTP connection from a computer linked to an online network. These images can be then stored in the recorder ’ s menu library for use as DVD menu layout images and DVD menu background images. Edit list files can ...

  • Univex PRV-LX1 - page 73

    73 PRV -LX1 En APP section = [ Cpy/Impt/Bkup ] = [EDL Import] = [Source File] DVD menu layout image files are added to the DVD menu layout library selected with the Function Menu ’ s EDIT section = [ DVD Menu ] = [ Menu Design ] = [ Design Select ] command. DVD menu background image files are added to the background library selected with the EDIT ...

  • Univex PRV-LX1 - page 74

    74 PRV -LX1 En Importing Image Data, Edit Lists Edit List File Format Edit list files are text files with the “ .edl ” filename extension. Composition is as follows: Header: PIONEER-DVDRec-EDL 002 ENCODING=XXX Entry: Number Operation T ype Parameter 1 Parameter 2 Parameter 3 The number of parameters differs depending on the type of operation in ...

  • Univex PRV-LX1 - page 75

    75 PRV -LX1 En Importing Image Data, Edit Lists Edit List Example PIONEER-D VDRec-EDL 002 ENCODING=utf8 Explanation 001 INI .......... XXXXXX 002 SET R:16 F:2 .......... XXXXXX 002 REC 01:00:00:00 01:10:00:00 STOP .......... XXXXXX 002 T -N T itle1 .......... XXXXXX 002 C-N Chapter1-1 .......... XXXXXX 002 CHP 01:05:00:00 .......... XXXXXX 002 C-N ...

  • Univex PRV-LX1 - page 76

    76 PRV -LX1 En Backing Up/Restoring USB HDDs Projects, image files, menu libraries, EDL data and System settings on the internal hard disk (HDD) can be backed up on an external hard disk (USB HDD) and data backed up on the external hard disk can be restored to the internal hard disk. Projects and other data backed up on the USB HDD can be deleted t ...

  • Univex PRV-LX1 - page 77

    77 PRV -LX1 En Backing Up/Restoring USB HDDs Restoring Use the APP section = [ Cpy/Impt/Bkup ] = [ Restore/Del ] command to restore data. Use the [ T ype ] and [ T arget ] commands to select the data types and files to be restored and press the Restore button to start. Select “ ALL ” on [ T arget ] command to process all files. Executing Restor ...

  • Univex PRV-LX1 - page 78

    78 PRV -LX1 En Recording T ime *1 Recording time is only an approximate value and depends on hard disk and DVD disc size. *2 The maximum recording time (maximum continuous recording time) for a clip (Rec – Stop) is 100 hours. (Figures in brackets indicate approximate recording times.) *3 During DV recording, the video resolution is 704 x 480 (NTS ...

  • Univex PRV-LX1 - page 79

    79 PRV -LX1 En Recording T ime 7 Recording time with Linear PCM (DVD, Hard Disk) *1 Recording time is only an approximate value and depends on hard disk and DVD disc size. 32 1:02 23:59 9.444 7.908 1536 720x480 720x576 16bit, 48kHz 31 1:02 23:59 9.444 7.908 1536 720x480 720x576 16bit, 48kHz 30 1:02 23:59 9.444 7.908 1536 720x480 720x576 16bit, 48kH ...

  • Univex PRV-LX1 - page 80

    80 PRV -LX1 En Function Menu T able Selected Project at top menu NTSC PA L Title Menu Chapter Menu No Menu Title & Chapter Helvetica Times Courier Mincho Gothic Select Button Layout Go T o Video Number / Name Number Name Disabled Default HDD Library Title Picture Default Select Picture Go T o Video (T ext Edit) Default 11 colors List Default 11 ...

  • Univex PRV-LX1 - page 81

    81 PRV -LX1 En Function Menu T able DVD Menu Project Title Navigation Cmd Del/Init Library Record/Name Copy Project Copy Clip Rename Clip Export Delete T arget Clip Info/Rename Chapter Editing -Waiting T ime T ype Design Select Name Protect Record to Num of Clips Num of Titles Last Modified Date T otal Capacity Copy T o Source Drive Copy From Clip ...

  • Univex PRV-LX1 - page 82

    82 PRV -LX1 En Function Menu T able EDIT APP Title DVD Disc Auto Capture Cpy/Impt/Bkup Title Selection Finalize Initialize Unfinalize Make Disc Make Image IN/OUT Point Chapter Point EDL Command EDL EDL Load/Delete EDL Save Disc Copy Disc Image Copy Image Copy/Del Clip 1 Clip 2 Clip 3 Clip 4 Clip 5 Next Page Finalize Initialize Unfinalize T arget T ...

  • Univex PRV-LX1 - page 83

    83 PRV -LX1 En Function Menu T able Image Copy/Del Menu Import EDL Import EDL Import Backup Restore/Del System Settings Destination T ype Source Source File Source Source File Backup T o T ype T arget Remaining Capacity Restore From / Del T ype T arget Remaining Capacity Keyboard Key Repeat Speed Mouse Mouse Speed DVD1 DVD2 DVD1&2 Background La ...

  • Univex PRV-LX1 - page 84

    84 PRV -LX1 En Function Menu T able SET UP System Operation System Settings F-Key Set 1-6 F-Key Set 7-12 Network UPS Setting Information HDD T ools Control Settings Time Zone Date(mm/dd/yyyy) Time(hh:mm:ss) F-Key Enable F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12 Network DHCP/Manual IP Address Subnet Mask Gateway Mac Adress Model Shutdown Delay System V ...

  • Univex PRV-LX1 - page 85

    85 PRV -LX1 En Function Menu T able Control Settings Video Settings HDD Recording Info Language Video/Audio Port Time Code Eject Settings External Sync OSD Composite Out Background Color DV OUT T est Signal Time Shift PLA Y Language Video Encode Rate Video Filter(NR) Audio Encode Audio Level Aspect Setup Level (*8) RS-422A Disabled IEEE1394 (*6) RS ...

  • Univex PRV-LX1 - page 86

    86 PRV -LX1 En Function Menu T able Others Video Audio Language Others Auto Chapter REC Button Aspect Still Mode Dolby Digital OUT DTS OUT 96 kHz PCM OUT MPEG OUT Audio Subtitle DVD Menu Subtitle Display Parental Level Country Code Manual 3 min 5 min 10 min 15 min 30 min 60 min REC Start Standby ->REC 4:3(LB) 4:3(PS) 16:9 Auto Frame Field Dolby ...

  • Univex PRV-LX1 - page 87

    87 PRV -LX1 En Function Menu T able Drive Project V Input A Input TV System HDD DVD1 DVD2 HDD DVD1 DVD2 DVD1&2 [new]h03mmdd_xx Project List Composite S-Video Component(Beta) (*9) Component(SMPTE) (*9) DV SDI (*10) RCA XLR DV SDI (*10) AES/EBU (*10) NTSC PA L Project : xxx Remaining : xxx.xx GB No Disc DVD-R(r) DVD-RW(r) DVD-RW(f) & Volume N ...

  • Univex PRV-LX1 - page 88

    88 PRV -LX1 En Shortcut Key Information Shortcut key Function Ctrl + P Play Ctrl + L Pause Ctrl + S Stop Ctrl + N Scan Fwd Ctrl + B Scan Rev Ctrl + Shift + N Skip Fwd Ctrl + Shift + B Skip Rev Ctrl + . > Step Fwd Ctrl + , < Step Rev Ctrl + Shift + . > Slow Fwd (During playback, initiates slow playback.) Ctrl + Shift + , < Slow Rev (Duri ...

  • Univex PRV-LX1 - page 89

    89 PRV -LX1 En Message Display Item TV System TV System Network Network T ext entry HDD format HDD format HDD check USB HDD format, check USB HDD format Eject Initialize Initialize Initialize Initialize Initialize Finalize Finalize Finalize Finalize Finalize Copy Copy Copy Copy Copy Copy Copy Copy Copy Copy Copy Message Switch TV System After 10 se ...

  • Univex PRV-LX1 - page 90

    90 PRV -LX1 En Message Display Item Copy Copy Copy Import Import Import Import Export Export Export Export Menu Menu Menu Menu Menu Menu Menu Preview Menu Preview Menu Preview Menu Preview Emulation Emulation Emulation Emulation PROJECT -Record/Name PROJECT -Delete PROJECT -Delete PROJECT -Delete PROJECT -Copy PROJECT -CopyClip Message This will ov ...

  • Univex PRV-LX1 - page 91

    91 PRV -LX1 En Message Display Item PROJECT -CopyClip PROJECT Make Disc Make Disc Make Disc Make Disc Make Disc Make Disc Make Disc Make Disc Make Disc Make Disc Make Disc Make Image Make Image T rimming T rimming T rimming T rimming T rimming Divide Divide Divide Divide Divide Divide Divide Initialize Laibrary Delete Library Message Is this clip t ...

  • Univex PRV-LX1 - page 92

    92 PRV -LX1 En Message Display Item REC Message HDD_CAPA is not enough. DVD_CAP A is not enough. This disc is not writable. There is no disc. The number of titles is 99. No SDI_V Input. No SDI_A Input. No AES/EBU Input. No DV Input. Copy Protection ENCODER ERROR******** DRIVE ERROR****** The number of clips is 255. Comment The hard disk drive has i ...

  • Univex PRV-LX1 - page 93

    93 PRV -LX1 En Message Display Item REC IN-OUT REC EDL REC Message Cannot record to different condition discs. No Video Input. Confirm TV system of the video input. Stopped automatically from Rec-Pause for the system protection. Stopped automatically because of no HDD remaining caoacity . Stopped automatically because of no DVD remaining capacity . ...

  • Univex PRV-LX1 - page 94

    94 PRV -LX1 En Message Display Item DVD-Video playback HDD playback Message Incompatible disc region number . Operation cannot be performed. Operation is not permitted. No title on the disc. Unknown disc. ERROR REGION (main unit display) OPERA TION INHIBITED (main unit display) DISC NO TITLE (main unit display) UNKNOWN DISC (main unit display) T em ...

  • Univex PRV-LX1 - page 95

    95 PRV -LX1 En TROUBLESHOOTING Incorrect operations can be mistaken as malfunctions. If you believe the unit is not operating correctly , consult the chart below . Sometimes incorrect operation may be due to a malfunction in another component. If the problem is not fixed, check the other components used with the player . If the problem still persis ...

  • Univex PRV-LX1 - page 96

    96 PRV -LX1 En TROUBLESHOOTING Symptom Cannot playback on DVD player / other DVD recorders. Image stops during playback, or commands are disabled. Main unit command buttons don ’ t work. Can ’ t output 96 kHz audio in digital. Remote control unit doesn ’ t work. T elevision malfunctions. Memory settings are erased. No sound from speakers, or ...

  • Univex PRV-LX1 - page 97

    97 PRV -LX1 En Specifications General: Power rating: AC 120 V , 50/60 Hz Power consumption: Maximum 2.0 A Power consumption during idling: 6.5 W Weight: Single-DVD-drive model About 13.8 kg (30 lb 7 oz) T win-DVD-drive model About 15.1 kg (33 lb 5 oz) External dimensions: 427 (W) x 179.5 (H) x 539.5 (D) mm (including projecting parts) 16-13/16 (W) ...

  • Univex PRV-LX1 - page 98

    98 PRV -LX1 En Video input: Composite: BNC x 1, 1.0 Vp-p, 75 Ω S-VIDEO: 4-pin mini DIN x 1 Y : 1.0 Vp-p, 75 Ω C: 0.265 Vp-p (NTSC), 0.300 Vp-p (P AL), 75 Ω Component: BNC x 3 Y : 1.0 Vp-p, 75 Ω B-Y : 0.486/0.700 Vp-p selectable (NTSC), 0.525 Vp-p (P AL), 75 Ω (with 75% color bar) R-Y : 0.486/0.700 Vp-p selectable (NTSC), 0.525 Vp-p (P AL) ...

  • Univex PRV-LX1 - page 99

    99 PRV -LX1 En Language/Langue Code Japanese/japonais ( ja ) 1001 English/anglais ( en ) 0514 French ( fr ) 0618 German ( de ) 0405 Italian ( it ) 0920 Spanish ( es ) 0519 Dutch ( nl ) 1412 Russian ( ru ) 1821 Chinese ( zh ) 2608 Korean ( ko ) 1115 Greek ( el ) 0512 Afar ( aa ) 0101 Abkhazian ( ab ) 0102 Afrikaans ( af ) 0106 Amharic ( am ) 0113 Ar ...

  • Univex PRV-LX1 - page 100

    100 PRV -LX1 En Country Code Philippines ( ph ) 1608 Portugal ( pt ) 1620 Russian Federation ( ru ) 1821 Singapore ( sg ) 1907 Spain ( es ) 0519 Sweden ( se ) 1905 Switzerland ( ch ) 0308 T aiwan ( tw ) 2023 Thailand ( th ) 2008 United Kingdom ( gb ) 0702 USA ( us ) 2119 Argentina ( ar ) 0118 Australia ( au ) 0121 Austria ( at ) 0120 Belgium ( be ) ...

  • Univex PRV-LX1 - page 101

    101 PRV -LX1 En Copyright © 1989, 1991 Free Software Foundation, Inc. 59 T emple Place, Suite 330, Boston, MA 02111-1307 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take a way your freedom to share and change it. B ...

  • Univex PRV-LX1 - page 102

    102 PRV -LX1 En Regarding the GNU General Public License These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute ...

  • Univex PRV-LX1 - page 103

    103 PRV -LX1 En Regarding the GNU General Public License 10.If you wish to incorporate parts of the Program into other free programs whose distribution conditions are dif ferent, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exce ...

  • Univex PRV-LX1 - page 104

    Published by Pioneer Corporation. Copyright © 2004 Pioneer Corporation. All rights reserved. PIONEER CORPORATION 4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan PIONEER ELECTRONICS (USA) INC. Business Solutions Division: 2265 East 220th Street, Long Beach, CA 90810, U.S.A. TEL: +1-310-952-2111 Customer Support Division: 1925 East Dominguez S ...

Manufacturer Univex Category DVD Recorder

Documents that we receive from a manufacturer of a Univex PRV-LX1 can be divided into several groups. They are, among others:
- Univex technical drawings
- PRV-LX1 manuals
- Univex product data sheets
- information booklets
- or energy labels Univex PRV-LX1
All of them are important, but the most important information from the point of view of use of the device are in the user manual Univex PRV-LX1.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Univex PRV-LX1, service manual, brief instructions and user manuals Univex PRV-LX1. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Univex PRV-LX1.

Similar manuals

A complete manual for the device Univex PRV-LX1, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Univex PRV-LX1 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Univex PRV-LX1.

A complete Univex manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Univex PRV-LX1 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Univex PRV-LX1, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Univex PRV-LX1, that we can find in the current document
3. Tips how to use the basic functions of the device Univex PRV-LX1 - which should help us in our first steps of using Univex PRV-LX1
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Univex PRV-LX1
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Univex PRV-LX1 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Univex PRV-LX1?

Use the form below

If you did not solve your problem by using a manual Univex PRV-LX1, ask a question using the form below. If a user had a similar problem with Univex PRV-LX1 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)