Manual IOGear M1023

68 pages 1.49 mb
Download

Go to site of 68

Summary
  • IOGear M1023 - page 1

    1 GUIP201 Part No. M1023 Installation Installation Installation Guide USB Net ShareStation User Manual ...

  • IOGear M1023 - page 2

    ...

  • IOGear M1023 - page 3

    3 T able of Contents Introduction 4 About this Manual 5 Package Contents 6 How it works 7 Hardwar e Installation 8 Windows XP/2000 Installation 11 Connecting to a USB device 20 Connecting to a Multifunction printer 23 Connecting to a USB hub 26 Disconnecting a USB device 28 Request to Disconnect 29 Vista Installation 32 Connecting a USB device in V ...

  • IOGear M1023 - page 4

    4 Introduction Thank you for purchasing the IOGEAR USB Net Shar eStation Multifunction Print and Storage Server (hereafter r eferred to as “server”). This server is designed to connect your All-In-One/Multifunction devices, standard printers, and USB storage devices (har d drives, fl ash drives, and memory car d readers) to your network, allow ...

  • IOGear M1023 - page 5

    5 About this Manual This manual provides introductory information as well as detailed instructions on how to set up and manage the IOGEAR USB Net ShareStation in various network environments. T o fully bene fi t from this document, you should be familiar with basic networking principles. The instructions de- scribed in this manual are based on the ...

  • IOGear M1023 - page 6

    6 Package Contents V erify that nothing is missing from the package by using the checklist below . Please contact your dealer if anything is missing or damaged. All packing materials are recyclable. Please con fi rm the items in the package below: 1 x USB Net ShareStation 1 x User Manual 1 x Software CD 1 x Power Adapter 1 x Warranty/Registration ...

  • IOGear M1023 - page 7

    7 How it works Power Adapter Port 1. Network Port 2. LED 3. USB Port 4. 1 2 3 4 ...

  • IOGear M1023 - page 8

    8 Hardware Installation *Make sur e that your USB devices are switched of f and that the server’ s power adapter is disconnected. 1. Connect your USB device to the USB port of the USB Net ShareStation. USB device Hardwar e Installation ...

  • IOGear M1023 - page 9

    9 2. Connect the USB Net ShareStation server to the router or switch with the Ethernet cable Ethernet Cable ...

  • IOGear M1023 - page 10

    10 3. Connect the power adapter to the USB Net ShareStation server . When the Link indicator lights up, the USB Net ShareStation is correctly connected to the network. Ethernet Cable Power Adapter ...

  • IOGear M1023 - page 11

    11 Software Installation - XP/2K 1. Insert the Software CD into your computer . A splash screen should appear with a menu of options, including the option to install the appropriate USB Net ShareStation softwar e, access the User Manual, or Exit out of the splash menu. T o install the appropriate USB Net ShareStation softwar e, click the installati ...

  • IOGear M1023 - page 12

    12 2. The installation wizard will start the installation process, click “ Next ” to continue. ...

  • IOGear M1023 - page 13

    13 3. When the installation completes, click “ Finish ” to close the installation wizard. ...

  • IOGear M1023 - page 14

    14 4. On your desktop you will see a new IOGEAR icon called “ Launch IOGEAR USB server ”, double click the icon and it will bring up the IOGEAR USB server con fi guration utility . ...

  • IOGear M1023 - page 15

    15 5. Once the IOGEAR utility is launched, Windows will prompt you with a “ Found New Hardware Wizar d ” window . Y ou will need to complete the wizard so that you will be able to use the USB Net ShareStation on your computer Select “ No, not this time ” and click on Next to continue. ...

  • IOGear M1023 - page 16

    16 6. Click on “ Install the software automatically (Recommended) ” and click on Next to continue. ...

  • IOGear M1023 - page 17

    17 7. Windows will install the necessary drivers for the USB Net ShareStation. ...

  • IOGear M1023 - page 18

    18 8. Select Finish to complete the Found New Hardwar e Wizard. ...

  • IOGear M1023 - page 19

    19 9. Once you are fi nished with the Found New Hardware Wizard , the IOGEAR utility will show up and display all the active USB Net ShareStations connected on your network. In this scr een, you will see the product listed as “ IOGEAR GUIP201 – AA0001 (192.168.10.52) ”. The “AA0001” is the last 6 digits of the device’ s MAC address, an ...

  • IOGear M1023 - page 20

    20 1. Connect the USB cable on your USB device to the USB port on the USB Net Share Station, and make sure both the USB device and the USB Net ShareStation ar e powered on. The USB device will then show up on the IOGEAR USB Server utility underneath the “ IOGEAR GUIP201 .” as a green icon. The green icon indicates that the USB device is ready t ...

  • IOGear M1023 - page 21

    21 2. Select the USB device that you will want to connect and click on the “ Connect ” button at the bottom ...

  • IOGear M1023 - page 22

    22 3. Once the device has been connected, the green icon will turn orange to indicate that the connection has been established. The USB device now becomes available on your computer , and you can use this USB device as if it was directly connected to your computer . ...

  • IOGear M1023 - page 23

    23 1. Connect the USB cable on your printer or multi function printer to the IOGEAR GUIP201 and make sure your printer is powered on. Y ou will then see the connected printer show up in the IOGEAR USB Server utility underneath the “ IOGEAR GUIP201 …” Select the printer from the list and click on the “ Connect ” button. Note: If your USB d ...

  • IOGear M1023 - page 24

    24 2. The printer will be detected as if it was plugged directly into your computer . ...

  • IOGear M1023 - page 25

    25 3. If this printer is connected to your computer for the fi rst time, then you will need to complete the setup wizard for the printer software and driver installation. Please follow the wizard to setup the printer . Make sure you have the correct CD or drivers for your printer and follow the on-screen steps in the wizard. Once the wizar d is co ...

  • IOGear M1023 - page 26

    26 1. If you have more than one USB device that you would like to shar e over your network, you may add a USB 2.0 hub (4-port maximum) to the USB Net ShareStation. Connect the USB cable of the USB hub to the USB port on the IOGEAR USB Net ShareStation, then connect the USB device(s) to the USB ports on the USB hub. Make sure the power adapter of th ...

  • IOGear M1023 - page 27

    27 Note: USB Net ShareStation can only support up to 4 USB devices through a USB 2.0 Hub and certain USB devices requir e a direct connection to your computer in or der to function at full capacity . 2. After the USB device(s) are connected to the USB hub, the IOGEAR utility will automatically display the connected USB devices. If you do not see th ...

  • IOGear M1023 - page 28

    28 Disconnecting a USB device 1. T o disconnect a USB device, simply click on the connected USB device on the list of the utility software, and press the “ Disconnect ” button. The device will then no longer stay connected to your computer , however , you may re-connect the USB device again once the icon becomes green. ...

  • IOGear M1023 - page 29

    29 1. If a USB device is being used by another computer on your network, a red icon will be displayed in front of the device name. Y ou will not have the option to disconnect the device, however , you may send a courtesy message to request that the other user disconnect/release the device. Request to Disconnect ...

  • IOGear M1023 - page 30

    30 2. T o send the courtesy disconnect message, right click on the USB device and select “ Request Disconnect ”, as shown below . A message will then be sent to the user requesting that they disconnect from the USB device. NOTE: If the occupying user denies this request, then you will not be able to send any further requests to the same user fo ...

  • IOGear M1023 - page 31

    31 The chart list below shows what each colored icon means in the con fi guration software. USB device is available and ready to be connected The device is not connected but has some type of problem such as out of ink USB device has been established and is now connected Error with USB device. Example: out of paper USB device is in use by another u ...

  • IOGear M1023 - page 32

    32 1. Insert the Software CD into your computer . A splash screen should appear with a menu of options, including the option to install the appropriate USB Net Shar eSta- tion software, access the User Manual, or Exit out of the splash menu. T o install the appropriate USB Net Shar eStation software, click the installation button that corresponds t ...

  • IOGear M1023 - page 33

    33 2. Click OK to start the installation process ...

  • IOGear M1023 - page 34

    34 3. During the driver installation a Windows Vista security message will appear . Select “ Install this driver software anyway ” to continue. ...

  • IOGear M1023 - page 35

    35 4. Click on Finish to complete the installation process. ...

  • IOGear M1023 - page 36

    36 5. Once the installation process has been completed you will need to go to the Network window to con fi gur e the USB Net ShareStation. T o do so, click on the Vista logo on the lower right corner of your screen and select Network from the right hand side of the menu. ...

  • IOGear M1023 - page 37

    37 6. The USB Net ShareStation icon will appear under other devices on the Network window . If the USB Net ShareStation or any other network icons in the network window do not appear , then a message will show up across the network scr een indicating that Network Discovery is turned off. ...

  • IOGear M1023 - page 38

    38 7. T o turn Network Discovery on, right click on the message, then select “ T ur n on network discovery and fi le sharing ” fr om the list. Once Network Discovery has been enabled you will be able to see the USB Net ShareStation icon under Other Devices . If you are pr ompted by a User Account Control message notifying you that “ Windows ...

  • IOGear M1023 - page 39

    39 8. Select “ Y es, turn on network discovery and fi le sharing for all public networks ”. ...

  • IOGear M1023 - page 40

    40 9. Right click on the USB Net ShareStation “ IOGEAR GUIP201 …” icon, and select “ Install ” to begin using the USB Net ShareStation. ...

  • IOGear M1023 - page 41

    41 10. Click on the blinking window at the system tray which is prompted by the “ User Account Contr ol” permission window . Click Continue to proceed with the installation. ...

  • IOGear M1023 - page 42

    42 11. After the driver installation has been completed the “ IOGEAR GUIP201 …” icon will change to a new product image. If the new pr oduct image icon does not change, press “ F5 ” to r efresh the Network window . Before installing the driver After driver installation the device icon will change. Y ou are now ready to use the USB Net Sha ...

  • IOGear M1023 - page 43

    43 Connecting to a USB device in Vista 1. After you have successfully installed the USB Net ShareStation driver , connect the USB device to the USB Net ShareStation and make sur e both the USB device and the USB Net ShareStation ar e powered on. 2. When the USB device is connected, the USB Net ShareStation will detect the connection of the device, ...

  • IOGear M1023 - page 44

    44 3. Right click on the USB device that you will want to connect and select “ Connect ” to establish the connection. Y ou will see the device driver is installing and the status will show at the bottom right corner on your system tray . This message will go away once the drivers have been installed. After the installation is completed, the USB ...

  • IOGear M1023 - page 45

    45 1. Connect the USB cable of the USB hard drive to the USB port on the USB Net Shar eStation, and make sure both the USB har d drive and the USB Net ShareStation ar e powered on. After the USB hard drive is connected, the device icon will display in the Network widow . Right click on the device icon and select “My Computer” to bring up My Com ...

  • IOGear M1023 - page 46

    46 2. Y ou will now see the external hard drive become available as if it were directly connected to your computer . ...

  • IOGear M1023 - page 47

    47 1. If you have more than one USB device that you would like to shar e over your network, you may add a USB 2.0 hub (4-port maximum) to the USB Net ShareStation. Connect the USB cable of the USB hub to the USB port on the IOGEAR USB Net ShareStation, then connect the USB device(s) to the USB ports on the USB hub. Make sure the power adapter of th ...

  • IOGear M1023 - page 48

    48 T o safely disconnect a USB device under the Network window , right click the USB device icon and select “ Disconnect ” from the menu. Once the USB device has been disconnected, it will no longer be connected to your computer , and you can unplug the USB cable of the USB device from the USB Net ShareStation. If you would like to reconnect th ...

  • IOGear M1023 - page 49

    49 If you would like to use a USB device that is being occupied by another user you may send a courtesy message asking the user to disconnect. Y ou may do this by right clicking on the USB device icon that you will like to use and selecting “ Request Remote to Disconnect .” A message will then be sent to the user requesting that they disconnect ...

  • IOGear M1023 - page 50

    50 NOTE: after a system reboot, you might not be able to connect to any USB device for a short period of time. When right clicking on a device, you will see the following message instead of the option to “Connect.” Depending on the performance of your PC and the number of active USB Net ShareStations on your network, it may take up to 3 minutes ...

  • IOGear M1023 - page 51

    51 The polling interval will allow the con fi guration utility to pull information from your network to fi nd out the status of all the connected USB Net ShareStations and USB devices. By default, this feature is not automatically con fi gur ed. Y ou may set a time so that the server will perform the polling automatically . T o con fi gur e the ...

  • IOGear M1023 - page 52

    52 Y ou may set a number from 1 – 60 in the “ Seconds ” box. Click on Submit to allow the new interval setting to take effect. Once you have set a number the utility will automatically update any changes made to server in the main dialog box. ...

  • IOGear M1023 - page 53

    53 T o access web management interface in 1. XP , in the IOGEAR USB Server utility , select the USB Server on the list, and click on the Con fi g button. W eb Management Interface ...

  • IOGear M1023 - page 54

    54 2. T o access web management interface in VIST A, in the Network window, right click on the “ IOGEAR GUIP201 …” icon, and select “ View device webpage .” ...

  • IOGear M1023 - page 55

    55 3. The left panel of the web management interface provides a list of dif ferent options to choose fr om. Device Status : Displays the current USB device info and will tell you which computer a USB device is connected to. The interface is limited to support up to 4 USB devices. ...

  • IOGear M1023 - page 56

    56 Network : Y ou can change the network settings according to your network speci fi cations. If you would like to give the USB Net ShareStation a static IP addr ess, you will need to Disable DHCP in the “ DHCP Setting ” menu. Once DHCP is disabled, enter the desired IP addr ess on the IP address fi eld along with the subnet mask and click th ...

  • IOGear M1023 - page 57

    57 Upload Firmware : The fi rmwar e link will allow you to upload the latest fi rmwar e on the USB Net ShareStation server . Click on “Browse” to specify the fi rmware location on your PC. Once the location path of the fi rmware has been set, click “Submit” to begin the update. For all the latest fi rmwar e updates, please visit http:/ ...

  • IOGear M1023 - page 58

    58 Reset Device : The Reset Device window will allow you to reboot the USB Net Shar eStation server . Please note that if the USB Net ShareStation has a set passwor d, you will need to enter it into the password fi eld box. ...

  • IOGear M1023 - page 59

    59 Factory Default : Allows you to restor e the USB Net ShareStation back to factory default. Please note that if the USB Net ShareStation has a set passwor d, you will need to enter it into the password fi eld box. ...

  • IOGear M1023 - page 60

    60 Password Change : Y ou can add or change an existing password on the USB Net Shar eStation in this window . By default the USB Net Shar eStation does not come with a default password. ...

  • IOGear M1023 - page 61

    61 1. How come I cannot connect to my USB device to my computer through the USB Net ShareStation? • Make sure the USB device functions normally when you plug it into your PC via USB cable. • If the USB device, such as USB printer or multi-function printer , requires a driver , please make sure you have installed it on the computer you wish to u ...

  • IOGear M1023 - page 62

    62 15.21 Y ou are cautioned that changes or modi fi cations not expr essly approved by the part r esponsible for compliance could void the user’ s authority to operate the equipment. 15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursu- ant to part 15 of the FCC rules. These limits are ...

  • IOGear M1023 - page 63

    63 Operation is subject to the following two conditions: 1) this device may not cause interference and 2) this device must accept any interference, including interfer ence that may cause undesired operation of the device. FCC RF Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontr olled e ...

  • IOGear M1023 - page 64

    64 CE Statement This device has been tested and found to comply with the requir ements set up in the council directive on the approximation of the law of member states r elating to EMC Directive 89/336/EEC, Low V oltage Directive 73/23/EEC and R&TTE Dir ective 99/5/EC. ...

  • IOGear M1023 - page 65

    65 IN NO EVENT SHALL THE DIRECT VENDOR’S LIABILITY FOR DIRECT , INDIRECT , SPECIAL, INCIDENT AL OR CONSEQUENTIAL DAMAGES RESUL TING FROM THE USE OF THE PRODUCT , DISK OR ITS DOCUMENT ATION EXCEED THE PRICE P AID FOR THE PRODUCT . The direct vendor makes no warranty or r epresentation, expr essed, implied, or statutory with respect to the contents ...

  • IOGear M1023 - page 66

    66 IOGEAR, INC. 23 Hubble Irvine, CA 92618 P 949.453.8782 F 949.453.8785 Visit us at: www .iogear .com Contact © 2008 IOGEAR. All Rights reserved. Part No. M1023 IOGEAR, the IOGEAR logo, are trademarks or register ed trademarks of IOGEAR, Inc. Microsoft and Windows ar e regis- tered trademarks of Microsoft Corporation. All other brand and pr oduct ...

  • IOGear M1023 - page 67

    ...

  • IOGear M1023 - page 68

    © 2007 IOGEAR, INC. FUN IOGEAR offers connectivity solutions that ar e innovative, fun, and stylish, helping people enjoy daily life using our high technology products. GREEN IOGEAR is an environmentally conscious company that emphasizes the importance of conserving natural resour ces. The use of our technology solutions helps reduce electr onic w ...

Manufacturer IOGear Category Network Cables

Documents that we receive from a manufacturer of a IOGear M1023 can be divided into several groups. They are, among others:
- IOGear technical drawings
- M1023 manuals
- IOGear product data sheets
- information booklets
- or energy labels IOGear M1023
All of them are important, but the most important information from the point of view of use of the device are in the user manual IOGear M1023.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals IOGear M1023, service manual, brief instructions and user manuals IOGear M1023. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product IOGear M1023.

Similar manuals

A complete manual for the device IOGear M1023, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use IOGear M1023 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of IOGear M1023.

A complete IOGear manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual IOGear M1023 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the IOGear M1023, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the IOGear M1023, that we can find in the current document
3. Tips how to use the basic functions of the device IOGear M1023 - which should help us in our first steps of using IOGear M1023
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with IOGear M1023
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of IOGear M1023 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning IOGear M1023?

Use the form below

If you did not solve your problem by using a manual IOGear M1023, ask a question using the form below. If a user had a similar problem with IOGear M1023 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)