Manual Multiquip SP1CE13H18

82 pages 2.48 mb
Download

Go to site of 82

Summary
  • Multiquip SP1CE13H18 - page 1

    OPERA TION AND P AR TS MANUAL P/N 35213 THIS MANU AL MUST A CCOMP ANY THE EQ UIPMENT A T ALL TIMES. T o find the latest revision of this publication, visit our website at: www .multiquip.com STREET PRO 1 SERIES MODEL SP1CE13H18 CONCRETE/ASPHAL T SA W (HONDA GX390 GASOLINE ENGINE) Re vision #3 (06/09/08) ...

  • Multiquip SP1CE13H18 - page 2

    P A GE 2 — SP 1 SA W CE— OPERA TION AND P ARTS MANU AL — REV . #3 (06/09/08) Engine exhaust and some of its constituents, and some dust created of California to cause cancer , birth defects and other repr oductive harm. by power sanding, sawing, grinding, drilling and other construction activities contains chemicals kno wn to the State Some e ...

  • Multiquip SP1CE13H18 - page 3

    SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 3 Grinding/cutting/drilling of masonry , concrete, metal and other materials with silica in their composition may give off dust or mists containing crystalline silica. Silica is a basic component of sand, quartz, brick clay , granite and numerous other minerals and rocks. Rep ...

  • Multiquip SP1CE13H18 - page 4

    P A GE 4 — SP 1 SA W CE— OPERA TION AND P ARTS MANU AL — REV . #3 (06/09/08) MQ STREET PR O 1 CE SA W — T ABLE OF CONTENTS Proposition 65 W ar ning ............................................. 2 Silicosis/Respirator y W a r nings .................................. 3 T able Of Contents ..................................................... 4 ...

  • Multiquip SP1CE13H18 - page 5

    SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 5 www .m ultiquip .com Ordering parts has never been easier! Choose from three easy options: WE ACCEPT ALL MAJOR CREDIT CARDS! When ordering parts, please supply: ❒ ❒ ❒ ❒ ❒ Dealer Account Number ❒ ❒ ❒ ❒ ❒ Dealer Name and Address ❒ ❒ ❒ ❒ ❒ Shippin ...

  • Multiquip SP1CE13H18 - page 6

    P A GE 6 — SP 1 SA W CE— OPERA TION AND P ARTS MANU AL — REV . #3 (06/09/08) NO TES ...

  • Multiquip SP1CE13H18 - page 7

    SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 7 MQ STREET PR O 1 CE SA W — SAFETY MESSA GE ALERT SYMBOLS Safety precautions should be followed at all times when operating this equipment. F ailure to read, understand and comply with the Safety Messages and Operating Instructions could result in injury to yourself or oth ...

  • Multiquip SP1CE13H18 - page 8

    P A GE 8 — SP 1 SA W CE— OPERA TION AND P ARTS MANU AL — REV . #3 (06/09/08) Accidental Starting AL W A YS place the engine ON/OFF switch in the OFF position, when the saw is not in use. Over Speed Conditions NEVER tamper with the factory settings of the engine gove r nor . P ersonal injur y and damage to the engine or equipment can result if ...

  • Multiquip SP1CE13H18 - page 9

    SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 9 The following safety guidelines should always be used when operating the SP 1. SAFETY ■ DO NOT operate or service this equipment bef ore reading this entire manual . T h e manual must be kept available and accessible to the operator . ■ This equipment should not be oper ...

  • Multiquip SP1CE13H18 - page 10

    P A GE 10 — SP 1 SA W CE— OPERA TION AND P ARTS MANU AL — REV . #3 (06/09/08) MQ STREET PR O 1 CE SA W — RULES FOR SAFE OPERA TION ■ Examine blade flanges f or damage and e xcessive w ear . ■ Ensure the cleanliness of the blade before blade is installed. Blade should fit snugly on the shaft and against the inside/ outside blade flanges. ...

  • Multiquip SP1CE13H18 - page 11

    SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 11 Figure 1. SP 1 Decals MQ STREET PR O 1 CE SA W — RULES FOR SAFE OPERA TION EMERGENCIES ■ AL W A YS know the location of the nearest fire extinguisher . ■ AL W A YS know the location of the nearest first aid kit . ■ In emergencies always know the location of the nea ...

  • Multiquip SP1CE13H18 - page 12

    P A GE 12 — SP 1 SA W CE— OPERA TION AND P ARTS MANU AL — REV . #3 (06/09/08) MQ STREET PR O 1 CE SA W — SPECIFICA TIONS (SA W) Figure 2. SP 1 Dimensions Side View Front Vie w A C B F G D E * Vibration (at handle) results with SP1 Saw cutting concrete at a depth of 1-1/2 inches (38.1 mm) with an 18" (45.7 cm) blade , FULL THRO TTLE. s ...

  • Multiquip SP1CE13H18 - page 13

    SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 13 MQ STREET PR O 1 CE SA W — SPECIFICA TIONS (ENGINE) ) e n i g n E ( s n o i t a c i f i c e p S . 2 e l b a T e n i g n E l e d o M A D N O H 2 T W Q 1 U 0 9 3 X G / 2 T W Q 1 K 0 9 3 X G e p y T e l g n i S , e k o r t s 4 d e l o o c - r i A e n i g n E e n i l o s a G ...

  • Multiquip SP1CE13H18 - page 14

    P A GE 14 — SP 1 SA W CE— OPERA TION AND P ARTS MANU AL — REV . #3 (06/09/08) MQ STREET PR O 1 CE SA W — GENERAL INFORMA TION The MQ Whiteman SP1 series walk-behind saws are designed for wet cutting of concrete or asphalt utilizing Diamond Blades. These saws have been engineered for general and industrial flat sawing applications. The reinf ...

  • Multiquip SP1CE13H18 - page 15

    SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 15 MQ STREET PR O 1 CE SA W — CONTROLS & COMPONENTS Figures 4 shows the location of the basic controls or components for the SP 1. Listed below is a brief explanation of each control or component. 1 . Hand Grips/Handlebar – When operating the saw , place both hands on ...

  • Multiquip SP1CE13H18 - page 16

    P A GE 16 — SP 1 SA W CE— OPERA TION AND P ARTS MANU AL — REV . #3 (06/09/08) Figure 5. Engine Controls and Components Initial Servicing The engine (Figure 5) must be checked for proper lubrication and filled with fuel prior to operation. Refer to the manufacturers engine manual for instructions & details of operation and servicing. 1 . F ...

  • Multiquip SP1CE13H18 - page 17

    SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 17 MQ STREET PR O 1 CE SA W — PREP ARA TION/PRE-INSPECTION PREP ARA TION / PRE-INSPECTION 1 . Read and fully understand this manual, the saf ety intructions in par ticular , and the engine manufacturer's manual supplied with the saw . 2 . Select the correct blade for e ...

  • Multiquip SP1CE13H18 - page 18

    P A GE 18 — SP 1 SA W CE— OPERA TION AND P ARTS MANU AL — REV . #3 (06/09/08) Figure 10. Pulley Alignment 3 . Check V -belt tension by using a tension meter (3.0 lbs./ 1.36Kg) against the inside belt at a mid point between the two pulleys, or by deflecting the center belt at a mid point 3/16" (5 mm). 4. DO NO T over or under tighten the ...

  • Multiquip SP1CE13H18 - page 19

    SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 19 F ailure to thoroughly inspect the diamond blade (Figure 11) for operational safety could result in damage to the blade or the saw , and may cause injury to the user or others in the operating area. Discard damaged or worn blades and replace with fresh blade. Figure 11. Di ...

  • Multiquip SP1CE13H18 - page 20

    P A GE 20 — SP 1 SA W CE— OPERA TION AND P ARTS MANU AL — REV . #3 (06/09/08) W ARNING F ailure to thoroughly inspect the diamond blade for operational safety could result in damage to the blades or the saw and may cause injury to the user or others in the operating area. 2. Blade Guard - Pivot the blade guard front cover all the way back. Th ...

  • Multiquip SP1CE13H18 - page 21

    SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 21 MQ STREET PR O 1 CE SA W — BLADE PLA CEMENT 6. Inner Flange (Collar) - This flange is fix ed upon the spindle. The inside surface of the flange must be free of debris and permit a tight closure on the surface of the blade. W ARNING Dropping or forcing the blade onto the ...

  • Multiquip SP1CE13H18 - page 22

    P A GE 22 — SP 1 SA W CE— OPERA TION AND P ARTS MANU AL — REV . #3 (06/09/08) MQ STREET PR O 1 CE SA W — RAISE/LO WER AND DEPTH ST OP Raise/Lower and Depth Stop The saw is equipped with a Raise/Lower and Depth Stop Assembly that is supported by the following components. (Figure 14) Figure 14. Cutting Depth - Raise/Lower System 1 . Adjusting ...

  • Multiquip SP1CE13H18 - page 23

    SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 23 MQ STREET PR O 1 CE SA W — INITIAL ST ART -UP DO NOT attempt to operate the saw until this manual has been read and thoroughly understood. Engine operating steps ma y v ar y . See included engine manufacturer's operating manual. Figure 17. Engine Fuel V alve Lever 2 ...

  • Multiquip SP1CE13H18 - page 24

    P A GE 24 — SP 1 SA W CE— OPERA TION AND P ARTS MANU AL — REV . #3 (06/09/08) 7 . Grasp the star ter grip (Figure 22) and slowly pull it out. The resistance becomes the hardest at the compression point. Pull the starter grip briskly and smoothly for starting. Figure 22. Starter Grip 9 . Before the saw is placed into operation, run the engine ...

  • Multiquip SP1CE13H18 - page 25

    SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 25 MQ STREET PR O 1 CE SA W — OPERA TION AL W A YS keep clear of r otating or mo ving par ts while operating this equipment. W ARNING 4 . When blade has reached full cutting depth, slowly walk behind the saw at a rate that will allow the engine to operate without losing opt ...

  • Multiquip SP1CE13H18 - page 26

    P A GE 26 — SP 1 SA W CE— OPERA TION AND P ARTS MANU AL — REV . #3 (06/09/08) MQ STREET PR O 1 CE SA W — OPERA TION Restarting After Intervention If cutting is interrupted where the engine stops or is turned off while the blade is still in the cut: a. T ur n Engine Off s witches to "OFF" b. Raise the blade out of the cut c. Restar ...

  • Multiquip SP1CE13H18 - page 27

    SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 27 Drive Belt Refer to page 16 of this manual for Drive Belt adjustment procedures and Removal and Replacement procedures. See the engine manual supplied with your machine for appropriate engine maintenance schedule and troubleshooting guide for problems. MQ STREET PR O 1 CE ...

  • Multiquip SP1CE13H18 - page 28

    P A GE 28 — SP 1 SA W CE— OPERA TION AND P ARTS MANU AL — REV . #3 (06/09/08) MQ STREET PR O 1 CE SA W — MAINTENANCE Figure 24. Engine Oil Change Dispose of used oil properly . DO NO T pour used oil on the ground, down a drain, or throw in the trash. Used oil can generally be taken to your local recycling center or service station for recla ...

  • Multiquip SP1CE13H18 - page 29

    SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 29 MQ STREET PR O 1 CE SA W — OPTIONAL W A TER T ANK 1 6 8 7 9 11 12 10 13 W A TER T ANK KIT (OPTION) 1 . Locate all parts listed in the parts list (see page 45). 2 . Slide the T ank Shelf (item 1, Figure 25) ov er the top of the engine so the recoil starter fits through th ...

  • Multiquip SP1CE13H18 - page 30

    P A GE 30 — SP 1 SA W CE— OPERA TION AND P ARTS MANU AL — REV . #3 (06/09/08) MQ STREET PR O 1 CE SA W — OPTIONAL W A TER T ANK 9 Place the W ater T ank (with the hose assemb led), onto the T ank Shelf so the v alv e and hose are resting in the notch of the top of the T ank Shelf . (Figure 27) 10. Place the Bungee Cord (item 4) o v er the W ...

  • Multiquip SP1CE13H18 - page 31

    SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 31 MQ STREET PR O 1 CE SA W — TROUBLESHOO TING (SA W) G N I T O O H S E L B U O R T E D A L B . 5 E L B A T M O T P M Y S M E L B O R P E L B I S S O P N O I T U L O S . g n i t t u c s p o t s r o s w o l s e d a l B g n i e b l a i r e t a m e h t r o f d r a h o o t e d ...

  • Multiquip SP1CE13H18 - page 32

    P A GE 32 — SP 1 SA W CE— OPERA TION AND P ARTS MANU AL — REV . #3 (06/09/08) MQ STREET PR O 1 CE SA W — TROUBLESHOO TING (ENGINE) ) E N I G N E ( G N I T O O H S E L B U O R T . 6 E L B A T M O T P M Y SE S U A C E L B I S S O PN O I T U L O S o n t u b , e l b a l i a v a s i l e u f " , t r a t s o t t l u c i f f i D . " g u l ...

  • Multiquip SP1CE13H18 - page 33

    SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 33 MQ STREET PR O 1 CE SA W — TROUBLESHOO TING (ENGINE) ) D E U N I T N O C , E N I G N E ( G N I T O O H S E L B U O R T . 6 E L B A T M O T P M Y SE S U A C E L B I S S O PN O I T U L O S r e p o r p s i n o i s s e r p m o c " r e w o p n i k a e W " . e r i f ...

  • Multiquip SP1CE13H18 - page 34

    P A GE 34 — SP 1 SA W CE— OPERA TION AND P ARTS MANU AL — REV . #3 (06/09/08) The contents and part numbers listed in the parts section are subject to change without notice . Multiquip does not guarantee the availibility of the parts listed. When ordering a part that has more than one item number listed, check the remarks column f or help in ...

  • Multiquip SP1CE13H18 - page 35

    SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 35 MQ STREET PR O 1 CE SA W — SUGGESTED SP ARE P ARTS MQ STREET PRO 1 CE CONCRETE/ASPHAL T SA W 1 T O 3 UNITS WITH HONDA GX390K1QWT2/GX390U1QWT2 ENGINES 1 to 3 Units Qt y . ...... P/N ........................... Description 3 20478 ................... HAND GRIP 4 2621 ..... ...

  • Multiquip SP1CE13H18 - page 36

    P A GE 36 — SP 1 SA W CE— OPERA TION AND P ARTS MANU AL — REV . #3 (06/09/08) MQ STREET PR O 1 SA W — DECALS DECALS E n g i n e ex h a u s t a n d s o m e o f i t s c o n s t i t u e n t s , a n d s o m e d u s t c r e a t e d o f C a l i f o r n i a t o c a u s e c a n c e r ,b i r t h d e f e c t s a n d o t h e r r e p r o d u c t i v e ...

  • Multiquip SP1CE13H18 - page 37

    SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 37 MQ STREET PR O 1 CE SA W — DECALS DECALS NO . P AR T NO . P AR T NAME QTY . REMARKS 1 35137 DECAL, W ARNING, READ MANU AL1 .......... SAFETY ITEM 2 20525 DECAL, PR OP 65 W ARNING ......... 1 .......... SAFETY ITEM 3 13118 DECAL, PO WDER COA TED 1 4 25782 DECAL, MQ DIAMON ...

  • Multiquip SP1CE13H18 - page 38

    P A GE 38 — SP 1 SA W CE— OPERA TION AND P ARTS MANU AL — REV . #3 (06/09/08) MQ STREET PR O 1 CE SA W — ENGINE, BEL TS AND PULLEYS ENGINE, BEL TS AND PULLEYS ...

  • Multiquip SP1CE13H18 - page 39

    SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 39 MQ STREET PR O 1 CE SA W — ENGINE, BEL TS AND PULLEYS ENGINE, BEL TS AND PULLEYS NO . P AR T NO . P AR T NAME QTY . REMARKS 1 15103 ENGINE 13 HP HOND A RED 1 2 9152 K E Y , 1/4 X 1-3/4 1 3 0669 A SCREW . HHCS 5/16-18 x 2-1/4" 4 4 0300B FL A T W ASHER 5/16" 1 0 ...

  • Multiquip SP1CE13H18 - page 40

    P A GE 40 — SP 1 SA W CE— OPERA TION AND P ARTS MANU AL — REV . #3 (06/09/08) UNDERCARRIAGE ASSY MQ STREET PR O 1 CE SA W — UNDERCARRIA GE ASSY . ...

  • Multiquip SP1CE13H18 - page 41

    SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 41 UNDERCARRIAGE ASSY MQ STREET PRO 1 CE SA W — UNDERCARRIA GE ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 08233-005 LOCKNUT , 5/16 - 18 1 2 18637-001 KNOB 1 3 0161 D HEX NUT , 5/16 - 18 3 4 25496 BU S HI N G 1 5 28808-002 CRANK HANDLE 1 6 26164-001 LOCK PIN 1 7 456 ...

  • Multiquip SP1CE13H18 - page 42

    P A GE 42 — SP 1 SA W CE— OPERA TION AND P ARTS MANU AL — REV . #3 (06/09/08) MQ STREET PR O 1 CE SA W — BLADE ASSEMBL Y & W A TER SYSTEM BLADE ASSEMBL Y & W A TER SYSTEM 1 PULLEY ASSEMBL Y . SEE P AGE 30. 1 33 34 40 37 41 36 1 2 2 3 3 4 4 5 7 6 8 11 13 14 22 24 25 2 21 27 16 16 18 19 20 17 26 28 26 25 30 32 31 26 35 35 30 38 29 39 ...

  • Multiquip SP1CE13H18 - page 43

    SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 43 MQ STREET PR O 1 CE SA W — BLADE ASSEMBL Y & W A TER SYSTEM BLADE ASSEMBL Y & W A TER SYSTEM NO . P AR T NO . P AR T NAME QTY . REMARKS 1 22129-001 CLAMP 2 2 0948 F L A T W ASHER, 1/4 5 3 0181B LOCK W ASHER 1/4 5 4 0949 HEX NUT 1/4 - 20 5 5 0424 SCREW , HHCS 1/4 ...

  • Multiquip SP1CE13H18 - page 44

    P A GE 44 — SP 1 SA W CE— OPERA TION AND P ARTS MANU AL — REV . #3 (06/09/08) MQ STREET PR O 1 CE SA W — POINTER ASSEMBL Y POINTER ASSEMBL Y 1 2 3 7 8 4 6 5 5 ...

  • Multiquip SP1CE13H18 - page 45

    SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 45 MQ STREET PR O 1 CE SA W — POINTER ASSEMBL Y POINTER ASSEMBL Y NO . P AR T NO . P AR T NAME QTY . REMARKS 1 21017 SCREW , POINTER ARM 1 2 29043-001 WHEEL, POINTER 1 3 1007 N U T , HEX JAM 3/8 - 16 2 4 1456 N U T , HEX FINISH 3/8 - 16 2 5 10133 N U T , NYLOC 3/8 - 16 2 6 ...

  • Multiquip SP1CE13H18 - page 46

    P A GE 46 — SP 1 SA W CE— OPERA TION AND P ARTS MANU AL — REV . #3 (06/09/08) MQ STREET PR O 1 CE SA W — W A TER T ANK (OPTIONAL) 2 1 8 6 9 7 5 2 14 15 13 11 10 12 4 3 W A TER T ANK (OPTION) ...

  • Multiquip SP1CE13H18 - page 47

    SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 47 MQ STREET PR O 1 CE SA W — W A TER T ANK (OPTIONAL) W A TER T ANK (OPTION) NO . P AR T NO . P AR T NAME QTY . REMARKS 1 29290-351 SHELF , T ANK 1 2 14821-001 CLAMP , HOSE 2 3 27040-001 HOSE, CLEAR PVC 19" (482.6mm) 1 4 28862-001 CORD , BUNGEE 1 5 24778-003 CONNECTOR ...

  • Multiquip SP1CE13H18 - page 48

    P A GE 48 — SP 1 SA W CE— OPERA TION AND P ARTS MANU AL — REV . #3 (06/09/08) AIR CLEANER ASSY . HOND A GX390K1QWT2/GX390U1QWT2 ENG.— AIR CLEANER ASSY . ...

  • Multiquip SP1CE13H18 - page 49

    SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 49 HOND A GX390K1QWT2/GX390U1QWT2 ENG.— AIR CLEANER ASSY . AIR CLEANER ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1      16271ZE2000 GASKET , ELBOW 1 1 ◊ ◊ ◊ ◊ ◊ 16271ZE2010 GASKET , ELBOW 1 2 17210ZE3010 ELEMENT , AIR CLEANER ............... ...

  • Multiquip SP1CE13H18 - page 50

    P A GE 50 — SP 1 SA W CE— OPERA TION AND P ARTS MANU AL — REV . #3 (06/09/08) CAMSHAFT ASSY . HOND A GX390K1QWT2/GX390U1QWT2 ENG.— CAMSHAFT ASSY . ...

  • Multiquip SP1CE13H18 - page 51

    SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 51 HOND A GX390K1QWT2/GX390U1QWT2 ENG.— CAMSHAFT ASSY . CAMSHAFT ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 14100ZF6W01 CAMSHAFT ASSEMBL Y .......................... 1 ......... INCLUDES ITEM W/ * 2 14410ZE3013 ROD , PUSH 2 3 14431ZE2010 ARM, V AL VE ROCKER 2 4 144 ...

  • Multiquip SP1CE13H18 - page 52

    P A GE 52 — SP 1 SA W CE— OPERA TION AND P ARTS MANU AL — REV . #3 (06/09/08) CARBURET OR ASSY . HOND A GX390K1QWT2/GX390U1QWT2 ENG.— CARBURET OR ASSY . ...

  • Multiquip SP1CE13H18 - page 53

    SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 53 HOND A GX390K1QWT2/GX390U1QWT2 ENG.— CARBURET OR ASSY . CARBURET OR ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 16010ZE2812 CARBURET OR, GASKET SET 1 INCLUDES ITEMS W/ + 2 $ 16011ZA0931 V A L V E SE T , FL OA T 1 3 $ 16013ZA0931 FL OA T SE T 1 4 $ 16015ZE8005 CHA ...

  • Multiquip SP1CE13H18 - page 54

    P A GE 54 — SP 1 SA W CE— OPERA TION AND P ARTS MANU AL — REV . #3 (06/09/08) CONTROL ASSY . HOND A GX390K1QWT2/GX390U1QWT2 ENG.— CONTROL ASSY . ...

  • Multiquip SP1CE13H18 - page 55

    SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 55 HOND A GX390K1QWT2/GX390U1QWT2 ENG.— CONTROL ASSY . CONTROL ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 2 16551ZE3000 ARM, GO VERNOR 1 3 16555ZE3000 ROD , GO VERNOR 1 4 16561ZE3000 SPRING, GO VERNOR 1 5 16562ZE3000 SPRING, THR O TTLE RETURN 1 6 16570ZE3W20 CONTROL ...

  • Multiquip SP1CE13H18 - page 56

    P A GE 56 — SP 1 SA W CE— OPERA TION AND P ARTS MANU AL — REV . #3 (06/09/08) CRANKCASE CO VER ASSY . HOND A GX390K1QWT2/GX390U1QWT2 ENG.— CRANKCASE ASSY . ...

  • Multiquip SP1CE13H18 - page 57

    SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 57 HOND A GX390K1QWT2/GX390U1QWT2 ENG.— CRANKCASE ASSY . CRANKCASE CO VER ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 2      11300ZE3602 CO VER ASSY ., CRANKCASE ......................... 1 ................ S/N 3287256 AND BELOW ........................ ...

  • Multiquip SP1CE13H18 - page 58

    P A GE 58 — SP 1 SA W CE— OPERA TION AND P ARTS MANU AL — REV . #3 (06/09/08) CRANKSHAFT ASSY . HOND A GX390K1QWT2/GX390U1QWT2 ENG.— CRANKSHAFT ASSY . ...

  • Multiquip SP1CE13H18 - page 59

    SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 59 HOND A GX390K1QWT2/GX390U1QWT2 ENG.— CRANKSHAFT ASSY . CRANKSHAFT ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 2      13310ZF6W10 CRANKSHAFT .......................................... 1 ......... INCLUDES ITEM W/ * 2 ◊ ◊ ◊ ◊ ◊ 13310ZF6W11 CR ...

  • Multiquip SP1CE13H18 - page 60

    P A GE 60 — SP 1 SA W CE— OPERA TION AND P ARTS MANU AL — REV . #3 (06/09/08) CYLINDER BARREL ASSY . HOND A GX390K1QWT2/GX390U1QWT2 ENG.— CYLINDER B ARREL ASSY . ...

  • Multiquip SP1CE13H18 - page 61

    SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 61 HOND A GX390K1QWT2/GX390U1QWT2 ENG.— CYLINDER B ARREL ASSY . CYLINDER BARREL ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1      12000ZF6W13 CYLINDER ASSY . (ALERT) .................... 1 .............. INCLUDES ITEMS W/ % 1 ◊ ◊ ◊ ◊ ◊ 12000Z ...

  • Multiquip SP1CE13H18 - page 62

    P A GE 62 — SP 1 SA W CE— OPERA TION AND P ARTS MANU AL — REV . #3 (06/09/08) CYLINDER HEAD ASSY . HOND A GX390K1QWT2/GX390U1QWT2 ENG.— CYLINDER HEAD ASSY . ...

  • Multiquip SP1CE13H18 - page 63

    SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 63 HOND A GX390K1QWT2/GX390U1QWT2 ENG.— CYLINDER HEAD ASSY . CYLINDER HEAD ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1      12200ZF6W01 CYLINDER HEAD ............................................. 1 ................ INCLUDES ITEMS W/ * 1 ◊ ◊ ◊ ? ...

  • Multiquip SP1CE13H18 - page 64

    P A GE 64 — SP 1 SA W CE— OPERA TION AND P ARTS MANU AL — REV . #3 (06/09/08) F AN CO VER ASSY . HOND A GX390K1QWT2/GX390U1QWT2 ENG.— F AN CO VER ASSY . ...

  • Multiquip SP1CE13H18 - page 65

    SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 65 HOND A GX390K1QWT2/GX390U1QWT2 ENG.— F AN CO VER ASSY . F AN CO VER ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 4 16731ZE2003 CLIP , TUBE 1 7 19610ZE3010ZB C O VER, F AN *NH1* (BLACK) 1 1 0 19631ZE3W00 SHROUD 1 13      36100ZH7003 SWITCH ASSY ., ENGI ...

  • Multiquip SP1CE13H18 - page 66

    P A GE 66 — SP 1 SA W CE— OPERA TION AND P ARTS MANU AL — REV . #3 (06/09/08) FL YWHEEL ASSY . HOND A GX390K1QWT2/GX390U1QWT2 ENG.— FL YWHEEL ASSY . ...

  • Multiquip SP1CE13H18 - page 67

    SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 67 HOND A GX390K1QWT2/GX390U1QWT2 ENG.— FL YWHEEL ASSY . FL YWHEEL ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 19511ZE3000 F AN, COOLING 1 3 28450ZE3W11 PULLEY , ST ARTER (SCREEN GRID) 1 7 31100ZE3701 FL YWHEEL 1 10      90201ZE3V00 NUT , SPECIAL (16M ...

  • Multiquip SP1CE13H18 - page 68

    P A GE 68 — SP 1 SA W CE— OPERA TION AND P ARTS MANU AL — REV . #3 (06/09/08) FUEL T ANK ASSY . HOND A GX390K1QWT2/GX390U1QWT2 ENG.— FUEL T ANK ASSY . ...

  • Multiquip SP1CE13H18 - page 69

    SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 69 HOND A GX390K1QWT2/GX390U1QWT2 ENG.— FUEL T ANK ASSY . FUEL T ANK ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 16854ZH8000 R UBBER, SUPPOR TER (107MM) 1 3 16955ZE1000 JOINT , FUEL T ANK 1 6      17510ZE3010ZB T ANK, FUEL *NH1* 1 6 ◊ ◊ ◊ ◊ ? ...

  • Multiquip SP1CE13H18 - page 70

    P A GE 70 — SP 1 SA W CE— OPERA TION AND P ARTS MANU AL — REV . #3 (06/09/08) IGNITION COIL ASSY . HOND A GX390K1QWT2/GX390U1QWT2 ENG.— IGNITION COIL ASSY . ...

  • Multiquip SP1CE13H18 - page 71

    SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 71 HOND A GX390K1QWT2/GX390U1QWT2 ENG.— IGNITION COIL ASSY . IGNITION COIL ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1      30500ZF6W02 COIL ASSY ., IGNITION 1 1 ◊ ◊ ◊ ◊ ◊ 30500ZF6W02 COIL ASSY ., IGNITION ................................... ...

  • Multiquip SP1CE13H18 - page 72

    P A GE 72 — SP 1 SA W CE— OPERA TION AND P ARTS MANU AL — REV . #3 (06/09/08) MUFFLER ASSY . HOND A GX390K1QWT2/GX390U1QWT2 ENG.— MUFFLER ASSY . ...

  • Multiquip SP1CE13H18 - page 73

    SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 73 HOND A GX390K1QWT2/GX390U1QWT2 ENG.— MEFFLER ASSY . MUFFLER ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 2 18310ZE2W61 MUFFLER 1 3 18320ZE2W61 PRO TECT OR, MUFFLER 1 5 18330ZE2W00 PIPE, EX. 1 6      18331ZE3810 CA P , MUFFLER 1 6 ◊ ◊ ◊ ◊ ◊ 1 ...

  • Multiquip SP1CE13H18 - page 74

    P A GE 74 — SP 1 SA W CE— OPERA TION AND P ARTS MANU AL — REV . #3 (06/09/08) PIST ON ASSY . HOND A GX390K1QWT2/GX390U1QWT2 ENG.— PIST ON ASSY . ...

  • Multiquip SP1CE13H18 - page 75

    SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 75 HOND A GX390K1QWT2/GX390U1QWT2 ENG.— PIST ON ASSY . PIST ON ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 13010ZF6005 RING SET , PIST ON (STD) 1 1 13011ZF6005 RING SET , PIST ON (0.25) 1 1 13012ZF6005 RING SET , PIST ON (0.50) 1 1 13013ZF6005 RING SET , PIST ON (0. ...

  • Multiquip SP1CE13H18 - page 76

    P A GE 76 — SP 1 SA W CE— OPERA TION AND P ARTS MANU AL — REV . #3 (06/09/08) RECOIL ST ARTER ASSY . HOND A GX390K1QWT2/GX390U1QWT2 ENG.— RECOIL ST A TER ASSY . ...

  • Multiquip SP1CE13H18 - page 77

    SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 77 HOND A GX390K1QWT2/GX390U1QWT2 ENG.— RECOIL ST A TER ASSY . RECOIL ST ARTER ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 28400ZE3W01ZB ST AR TER ASSY ., RECOIL *NH1* (BLA CK) .............. 1 ...... INCLUDES ITEMS W/ * 2 * 28410ZE3W01ZB CASE, RECOIL ST AR TER *NH1 ...

  • Multiquip SP1CE13H18 - page 78

    P A GE 78 — SP 1 SA W CE— OPERA TION AND P ARTS MANU AL — REV . #3 (06/09/08) LABELS ASSY . HOND A GX390K1QWT2/GX390U1QWT2 ENG.— LABELS ASSY . ...

  • Multiquip SP1CE13H18 - page 79

    SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 79 HOND A GX390K1QWT2/GX390U1QWT2 ENG.— LABELS ASSY . RECOIL ST ARTER ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 28400ZE3W01ZB ST AR TER ASSY ., RECOIL *NH1* (BLA CK) .............. 1 ...... INCLUDES ITEMS W/ * 2 * 28410ZE3W01ZB CASE, RECOIL ST AR TER *NH1* (BLA CK ...

  • Multiquip SP1CE13H18 - page 80

    P A GE 80 — SP 1 SA W CE— OPERA TION AND P ARTS MANU AL — REV . #3 (06/09/08) P A YMENT TERMS T erms of payment f or par ts are net 30 days. FREIGHT POLICY All parts orders will be shipped collect or prepaid with the charges added to the invoice. All shipments are F .O .B. point of origin. Multiquip’ s responsibility ceases when a signed ma ...

  • Multiquip SP1CE13H18 - page 81

    SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 81 NO TE P A GE ...

  • Multiquip SP1CE13H18 - page 82

    OPERA TION AND P AR TS MANUAL Y our Local Dealer is: HERE’S HOW TO GET HELP PLEASE HA VE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING © COPYRIGHT 2008, MUL TIQUIP INC. Multiquip Inc, the MQ logo and the Diamond Back logo are registered trademarks of Multiquip Inc. and may not be used, reproduced, or altered without written permission. All ot ...

Manufacturer Multiquip Category Pole Saw

Documents that we receive from a manufacturer of a Multiquip SP1CE13H18 can be divided into several groups. They are, among others:
- Multiquip technical drawings
- SP1CE13H18 manuals
- Multiquip product data sheets
- information booklets
- or energy labels Multiquip SP1CE13H18
All of them are important, but the most important information from the point of view of use of the device are in the user manual Multiquip SP1CE13H18.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Multiquip SP1CE13H18, service manual, brief instructions and user manuals Multiquip SP1CE13H18. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Multiquip SP1CE13H18.

Similar manuals

A complete manual for the device Multiquip SP1CE13H18, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Multiquip SP1CE13H18 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Multiquip SP1CE13H18.

A complete Multiquip manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Multiquip SP1CE13H18 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Multiquip SP1CE13H18, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Multiquip SP1CE13H18, that we can find in the current document
3. Tips how to use the basic functions of the device Multiquip SP1CE13H18 - which should help us in our first steps of using Multiquip SP1CE13H18
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Multiquip SP1CE13H18
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Multiquip SP1CE13H18 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Multiquip SP1CE13H18?

Use the form below

If you did not solve your problem by using a manual Multiquip SP1CE13H18, ask a question using the form below. If a user had a similar problem with Multiquip SP1CE13H18 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)