Manual Desa 26

64 pages 1.12 mb
Download

Go to site of 64

Summary
  • Desa 26 - page 1

    IMPORTANT Read and understand this manual before assembling, starting or servicing heater. Improper use of heater can cause serious injury. Keep this manual for future reference. PORT ABLE FORCED AIR HEA TERS OWNER’S MANUAL Heater Sizes: 8,8 (30,000) 20,5 (70,000) 26,4 (90,000) 44 kW (150,000 Btu/Hr) ...

  • Desa 26 - page 2

    2 099623 CONTENTS SECTION PAGE Safety Information .................................................................................. 3 Product Identification ............................................................................. 4 Unpacking ............................................................................................... 5 Ass ...

  • Desa 26 - page 3

    3 099623 SAFETY INFORMA TION WARNING ICON G 001 W ARNINGS IMPORTANT: Read this owner’s manual carefully and completely before trying to assemble, operate, or service this heater. Improper use of this heater can cause serious injury or death from burns, fire, explosion, electrical shock, and carbon monoxide poisoning. WARNING ICON G 001 DANGER Ca ...

  • Desa 26 - page 4

    4 099623 Fuel Cap Lower Shell Power Cord Upper Shell Figure 3 - 44 kW (150,000 Btu/Hr) Model Handle Fuel Cap Lower Shell Side Cover Fuel Tank Figure 1 - 8,8/20,5 kW (30/70,000 Btu/Hr) Models PRODUCT IDENTIFICA TION Upper Shell Hot Air Outlet Hot Air Outlet Air Filter End Cover Fan Guard Power Cord Flame-Out Control Reset Button Figure 2 - 26,4 kW ( ...

  • Desa 26 - page 5

    5 099623 UNP ACKING 1. Remove all packing items applied to heater for shipment. 2. Remove all items from carton. 3. Check items for any shipping damage. If heater is damaged, promptly inform dealer where you bought heater. ASSEMBL Y (For 26,4 and 44 kW [90,000 and 150,000 Btu/Hr] Models Only) These models are furnished with wheels and handles. Whee ...

  • Desa 26 - page 6

    6 099623 THEOR Y OF OPERA TION The Fuel System: The air pump forces air through the air line. The air is then pushed through the burner head nozzle. This air causes fuel to lift from the tank. A fine mist of fuel is sprayed into the combustion chamber. The Air System: The motor turns the fan. The fan pushes air into and around the combustion chamb ...

  • Desa 26 - page 7

    7 099623 VENTILA TION OPERA TION Continued Figure 6 - Flame-Out Control Reset Button, 8,8/20,5 kW (30/70,000 Btu/Hr) Models Figure 7 - Flame-Out Control Reset Button, 26,4 kW (90,000 Btu/Hr) Model WARNING ICON G 001 W ARNING Follow the minimum fresh, outside air ventilation requirements. If proper fresh, outside air ventilation is not provided, car ...

  • Desa 26 - page 8

    8 099623 OPERA TION Continued Figure 8 - Flame-Out Control Reset Button, 44 kW (150,000 Btu/Hr) Model Continued PREVENT A TIVE MAINTENANCE SCHEDULE Item How Often How To Fuel tank Flush every 150-200 hours See Storing, Transporting, or of operation or as needed. Shipping , above. Air output and Replace every 500 hours of See Air Output, Air Intake ...

  • Desa 26 - page 9

    9 099623 Continued Item How Often How To Spark plug Clean and regap every 600 See Spark Plug , pages 12 and 13. hours operation or replace as needed. Fan blades Clean every season or as needed. See Fan , page 19. Motor Not required/permanently lubricated TROUBLE- SHOOTING WARNING ICON G 001 W ARNING Never service heater while it is plugged in, oper ...

  • Desa 26 - page 10

    10 099623 Upper Shell Fan Guard Figure 12 - Fuel Filter Removal, 8,8/20,5 kW (30/70,000 Btu/Hr) Models Figure 11 - Upper Shell Removal, 44 kW (150,000 Btu/Hr) Model Upper Shell Fuel Filter (8,8/20,5 kW [30/70,000 Btu/Hr] Models) 1. Remove side cover screws using 5/16" nut-driver. 2. Remove side cover. 3. Pull rubber fuel line off fuel filter ...

  • Desa 26 - page 11

    11 099623 Fuel Filter (26,4 kW [90,000 Btu/Hr] Model) 1. Remove side cover screws using 5/16" nut-driver. 2. Remove side cover. 3. Pull upper fuel line off fuel filter neck. 4. Carefully pry bushing, lower fuel line, and fuel filter out of fuel tank. 5. Wash fuel filter with clean fuel and replace in tank. 6. Attach upper fuel line to fuel ...

  • Desa 26 - page 12

    12 099623 Spark Plug (8,8 kW [30,000 Btu/Hr] Model) 1. Remove upper shell (see page 10). 2. Remove fan (see page 19). 3. Remove fuel and air line hoses from nozzle assembly. 4. Remove spark plug wire from spark plug. 5. Remove two screws using 5/16" nut-driver and remove burner strap. 6. Place hex-body of spark plug into vise and tighten. 7. R ...

  • Desa 26 - page 13

    13 099623 Spark Plug (20,5/26,4/44 kW [70/90/150,000 Btu/Hr] Models) 1. Remove upper shell (see page 10). 2. Remove fan (see page 19). 3. Remove spark plug wire from spark plug. 4. Remove spark plug from burner head using 13/16" open-end wrench. 5. Clean and regap spark plug electrodes to .055" (1.4 mm) gap. 6. Install spark plug in burne ...

  • Desa 26 - page 14

    14 099623 Air Output, Air Intake, and Lint Filters 1. Remove upper shell (see page 10). 2. Remove filter end cover screws using 5/16" nut- driver. 3. Remove filter end cover. 4. Replace air output and lint filters. 5. Wash or replace air intake filter (see Preventative Maintenance Schedule, page 8). 6. Replace filter end cover. 7. Replace ...

  • Desa 26 - page 15

    15 099623 Nozzle (8,8 kW [30,000 Btu/Hr] Model) 1. Remove upper shell (see page 10). 2. Remove fan (see page 19). 3. Remove fuel and air line hoses from nozzle assem- bly. 4. Turn nozzle assembly 1/4 turn to left and pull toward motor to remove. 5. Place plastic hex-body into vise and lightly tighten. 6. Carefully remove nozzle from the nozzle adap ...

  • Desa 26 - page 16

    16 099623 Nozzle (20,5/26,4 kW [70/90,000 Btu/Hr] Models) 1. Remove upper shell (see page 10). 2. Remove fan (see page 19). 3. Remove fuel and air line hoses from burner head. 4. Remove spark plug wire from spark plug. 5. Remove spark plug from burner head using 13/16" open-end wrench. 6. Remove three screws using 5/16" nut-driver and rem ...

  • Desa 26 - page 17

    17 099623 Nozzle (44 kW [150,000 Btu/Hr] Model) 1. Remove upper shell (see page 10). 2. Remove fan (see page 19). 3. Remove spark plug wire from spark plug. 4. Remove spark plug from burner head using 13/16" open-end wrench. 5. Loosen flare nut using 3/4" open-end wrench. Push fuel tube down. 6. Remove air line hose from burner head. 7. ...

  • Desa 26 - page 18

    18 099623 Pump Rotor (Procedure if rotor is binding) 1. Remove upper shell (see page 10). 2. Remove filter end cover screws using 5/16" nut- driver. 3. Remove filter end cover and air filters. 4. Remove pump plate screws using 5/16" nut- driver. 5. Remove pump plate. 6. Remove rotor, insert, and blades. 7. Check for debris in pump. If ...

  • Desa 26 - page 19

    19 099623 Fan IMPORTANT: Remove fan from motor shaft before removing motor from heater. The weight of the motor resting on the fan could damage the fan pitch. 1. Remove upper shell (see page 10). 2. Use 1/8" allen wrench to loosen setscrew which holds fan to motor shaft. 3. Slip fan off motor shaft. 4. Clean fan using a soft cloth moistened wi ...

  • Desa 26 - page 20

    20 099623 WIRING DIAGRAMS Ignitor White Brown Blue Green/Yellow Photocell Spark Plug Flame- Out Control B Reset Button R Red Blue White Blue White Red Red Orange Terminal Board Motor Green/ Yellow Red Motor Start Relay Black S or 2 M or 3 L or 1 230V/50Hz Ignitor White Brown Blue Green/Yellow Photocell Spark Plug Flame- Out Control B Reset Button R ...

  • Desa 26 - page 21

    21 099623 26,4 44 KEY PART PART 90,000 150,000 NO. NUMBER DESCRIPTION QTY. QTY. 1 HA2203 Handles 2 — HA2205 Handles — 2 2 M12345-33 Screw, #10-24 x 1 3/4" 8 8 3 M12342-3 Wheel Support Frame 1 — M12831-3 Wheel Support Frame — 1 4 NTC-3C Hex Nut, #10-24 8 8 5 097896-01 Wheel 2 2 6 M28526 Cap Nut 2 2 7 M51015-01 Axle 1 — M16801-2 Axle ? ...

  • Desa 26 - page 22

    22 099623 ILLUSTRA TED P ARTS BREAKDOWN 8,8 kW (30,000 Btu/Hr) 18-1 18-2 18-3 18-4 18-5 18-6 18-7 18-8 18-9 18-10 18-11 18-12 18-13 18-14 18-15 18-16 18-17 18-18 Motor and Pump Assembly 1 2 3 4 5 6 7 8 9 11 12 13 13 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 35 36 37 38 39 14 10 11-1 11-2 11-3 11-4 11-5 33 34 40 41 42 ...

  • Desa 26 - page 23

    23 099623 This list contains replaceable parts used in your heater. When ordering parts, be sure to provide the correct model and serial numbers (from the model plate), then the part number and description of the desired part. P ARTS LIST 8,8 kW (30,000 Btu/Hr) KEY PART PART NO. NUMBER DESCRIPTION QTY. 1 M51104-01 Handle 1 2 098511-67 Upper Shell ( ...

  • Desa 26 - page 24

    24 099623 ILLUSTRA TED P ARTS BREAKDOWN 20,5 kW (70,000 Btu/Hr) 18-1 18-2 18-3 18-4 18-5 18-7 18-8 18-9 18-10 18-11 18-12 18-14 18-15 18-16 18-18 18-17 18-6 18-13 Motor and Pump Assembly 10-1 10-2 10-7 10-4 10-3 10-5 Burner Head Assembly 1 2 4 3 5 6 7 8 10 11 12 12 14 15 16 (2) 17 20 18 19 21 22 24 25 26 27 28 29 30 31 32 34 38 37 41 13 9 33 35 36 ...

  • Desa 26 - page 25

    25 099623 P ARTS LIST 20,5 kW (70,000 Btu/Hr) This list contains replaceable parts used in your heater. When ordering parts, be sure to provide the correct model and serial numbers (from the model plate), then the part number and description of the desired part. KEY PART PART NO. NUMBER DESCRIPTION QTY. 1 M51104-01 Handle 1 2 098511-67 Upper Shell ...

  • Desa 26 - page 26

    26 099623 1 2 3 4 5 7 8 9 10 11 12 13 14 15 16 (2) 17 18 19 20 25 26 29 30 31 32 33 34 35 36 37 38 39 40 41 6 42 43 21 22 23 24 45 44 27 28 46 ILLUSTRA TED P ARTS BREAKDOWN 26,4 kW (90,000 Btu/Hr) 13-1 13-2 13-3 13-4 13-5 13-6 13-7 13-8 13-9 13-10 13-11 13-12 13-13 13-15 13-16 13-17 13-18 13-14 Motor and Pump Assembly 8-2 8-5 8-4 8-1 Burner Head As ...

  • Desa 26 - page 27

    27 099623 P ARTS LIST 26,4 kW (90,000 Btu/Hr) This list contains replaceable parts used in your heater. When ordering parts, be sure to provide the correct model and serial numbers (from the model plate), then the part number and description of the desired part. **Not available as an assembly, order parts separately. KEY PART PART NO. NUMBER DESCRI ...

  • Desa 26 - page 28

    28 099623 1 2 3 4 5 7 8 9 10 11 12 13 14 15 16 17 18 19 20 22 9 23 24 25 26 27 28 29 30 31 13 32 9 32 33 33 34 9 35 36 37 40 41 42 43 9 45 47 9 48 44 49 50 51 32 52 6 39 38 21 53 9 54 46 ILLUSTRA TED P ARTS BREAKDOWN 44 kW (150,000 Btu/Hr) 22-1 22-2 22-3 22-4 22-5 22-6 22-7 22-8 22-9 22-10 22-11 22-12 22-13 22-14 22-15 22-16 22-17 22-18 8-6 8-5 8-4 ...

  • Desa 26 - page 29

    29 099623 This list contains replaceable parts used in your heater. When ordering parts, be sure to provide the correct model and serial numbers (from the model plate), then the part number and description of the desired part. P ARTS LIST 44 kW (150,000 Btu/Hr) KEY PART PART NO. NUMBER DESCRIPTION QTY. 1 098511-68 Upper Shell (Black) 1 098511-58 Up ...

  • Desa 26 - page 30

    30 099623 ACCESSORIES Purchase accessories from your local dealer. HEAVY DUTY WHEELS AND HANDLE KIT - HA1202 For heavy duty applications. Makes your heater even more portable and convenient. For 8,8/20,5 kW (30/ 70,000 Btu/Hr) models. AIR GAUGE KIT - HA1180 For all models. Special tool to check pump pressure. FLAME-OUT CONTROL/PHOTO- CELL TESTER - ...

  • Desa 26 - page 31

    31 099623 NOTES ...

  • Desa 26 - page 32

    32 099623 W ARRANTY AND REP AIR SER VICE POSE. IN ANY EVENT IMPLIED WARRANTIES INCLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR A PAR- TICULAR PURPOSE ARE LIMITED TO THE DURATION OF THIS EXPRESS WARRANTY. Any transportation charges, costs of installation, duty, taxes or any other charges whatsoever must be borne by the user. DESA International&ap ...

  • Desa 26 - page 33

    CALENT ADORES PORT A TILES DE AIRE FORZADO MANUAL DEL PROPIET ARIO T amaños: 8,8 (30,000) 20,5 (70,000) 26,4 (90,000) 44 kW (150,000 Btu/hr) IMPORTANTE Lea y comprenda este manual antes de armar, encender o dar servicio al calentador. El uso indebido del calentador puede causar lesiones graves. Guarde este manual para referencia futura. ...

  • Desa 26 - page 34

    2 099623 SECCION PAGINA CONTENIDO Información de seguridad ............................................................................................. 3 Identificación del producto .......................................................................................... 4 Desembalaje ............................................................ ...

  • Desa 26 - page 35

    3 099623 INFORMACION DE SEGURIDAD WARNING ICON G 001 ADVERTENCIAS IMPORTANTE: Lea este manual del propietario detenida y completamente antes de intentar armar, usar o dar servicio al calentador. El uso indebido de este calentador puede causar lesiones graves o la muerte a causa de las quemaduras, incendios, explosiones, choques eléctricos y envene ...

  • Desa 26 - page 36

    4 099623 Figura 3 - Modelo de 44 kW (150,000 Btu/hr) Tapa de combustible Casco inferior Salida de aire caliente Salida de aire caliente Botón de reposición del control de extinción de llamas IDENTIFICACION DEL PRODUCT O Casco superior Protector del ventilador Tanque de combus- tible Tapa de combustible Casco superior Tanque de combustible Cordó ...

  • Desa 26 - page 37

    5 099623 DESEMBALAJE 1. Quite todo el material de embalar aplicado al calentador para el transporte. 2. Saque todos los componentes de la caja. 3. Inspeccione los componentes en busca de daños ocurridos durante el transporte. Si el calentador ha sufrido daños, informe oportunamente al concesionario donde se compró el calentador. ARMADO (Sólo pa ...

  • Desa 26 - page 38

    6 099623 TEORIA DE FUNCIONAMIENT O Sistema de combustible: La bomba de aire fuerza el paso del aire por la línea de aire. De allí, el aire es empujado a través de la boquilla del quemador. Este aire hace que el combustible del tanque suba. Un vapor fino de combustible es rociado en la cámara de combustión. Sistema de aire: El motor hace girar ...

  • Desa 26 - page 39

    7 099623 VENTILACION WARNING ICON G 001 ADVERTENCIA Observe los requisitos m í nimos de ventilaci ó n de aire fresco exterior. Si no se provee la ventilaci ó n debida con aire fresco exterior, podr í a ocurrir el envenenamiento por mon ó xido de carbono. Antes de hacer funcionar el calentador, aseg ú rese de proporcionar buena ventilaci ó n ...

  • Desa 26 - page 40

    8 099623 PROGRAMA DE MANTENIMIENT O PREVENTIVO Para apagar el calentador 1. Desenchufe el cordón eléctrico del tomacorriente. Para volver a encender el calentador 1. Espere 2 minutos después de apagar el calentador. 2. Repita los pasos bajo Para encender el calentador , en la página 7. Bot ó n de reposici ó n del control de extinci ó n de ll ...

  • Desa 26 - page 41

    9 099623 Intervalo Límpiela y ajuste el espacio entre electrodos cada 600 horas de funcionamiento o según sea necesario. Límpielas cada temporada o según sea necesario. No requerido/lubricado permanentemente. Item Bujía Paletas del ventilador Motor Procedimiento Vea Bujía , páginas 12 y 13. Vea Ventilador , página 19. LOCALIZACION DE A VERI ...

  • Desa 26 - page 42

    10 099623 Figura 12 - Remoci ó n del filtro de combustible, modelos de 8,8/20,5 kW (30/70,000 Btu/hr) Figura 11 - Remoci ó n del casco superior, modelo de 44 kW (150,000 Btu/hr) Figura 9 - Remoci ó n del casco superior, modelos de 8,8/20,5 kW (30/70,000 Btu/hr) Figura 10 - Remoci ó n del casco superior, modelo de 26,4 kW (90,000 Btu/hr) Casco s ...

  • Desa 26 - page 43

    11 099623 Filtro de combustible (Modelo de 26,4 kW [90,000 Btu/hr]) 1. Quite los tornillos de la cubierta lateral con una llave de tuercas de 5/16". 2. Quite la cubierta lateral. 3. Quite la línea de combustible superior del cuello del filtro de combustible. 4. Palanquee cuidadosamente el buje, la línea de combustible inferior y el filtro de ...

  • Desa 26 - page 44

    12 099623 Buj í a (Modelo de 8,8 kW [30,000 Btu/hr]) 1. Quite el casco superior (vea la página 10). 2. Quite el ventilador (vea la página 19). 3. Quite las mangueras de las líneas de aire y de combus- tible del conjunto de la boquilla. 4. Quite el cable de la bujía. 5. Quite los dos tornillos con una llave de tuercas de 5/16" y quite la b ...

  • Desa 26 - page 45

    13 099623 Buj í a (Modelos de 20,5/26,4/44 kW [70/90/ 150,000 Btu/hr]) 1. Quite el casco superior (vea la página 10). 2. Quite el ventilador (vea la página 19). 3. Quite el cable de la bujía. 4. Quite la bujía del quemador con una llave de boca de 13/16". 5. Limpie la bujía y ajuste el espacio entre electrodos a 1,4 mm (0.055 in.). 6. In ...

  • Desa 26 - page 46

    14 099623 Filtros de salida de aire, de admisi ó n de aire y de pelusa 1. Quite el casco superior (vea la página 10). 2. Quite los tornillos de la cubierta del extremo del filtro con una llave de tuercas de 5/16". 3. Quite la cubierta del extremo del filtro. 4. Reemplace los filtros de salida de aire y de pelusa. 5. Lave o reemplace el filtr ...

  • Desa 26 - page 47

    15 099623 Boquilla (Modelo de 8,8 kW [30,000 Btu/hr]) 1. Quite el casco superior (vea la página 10). 2. Quite el ventilador (vea la página 19). 3. Quite las mangueras de las líneas de aire y de combus- tible del conjunto de la boquilla. 4. Gire el conjunto de la boquilla 1/4 de vuelta a la izquierda y tire hacia el motor para quitarlo. 5. Coloqu ...

  • Desa 26 - page 48

    16 099623 Figura 27 - Remoci ó n del quemador, modelos de 20,5/26,4 kW (70/90,000 Btu/hr) C á mara de combusti ó n Manguera de aire Manguera de combustible Figura 28 - Remoci ó n de la boquilla, modelos de 20,5/26,4 kW (70/90,000 Btu/hr) Sello de la boquilla Boquilla (Modelos de 20,5/26,4 kW [70/ 90,000 Btu/hr]) 1. Quite el casco superior (vea ...

  • Desa 26 - page 49

    17 099623 Boquilla (Modelo de 44 kW [150,000 Btu/hr]) 1. Quite el casco superior (vea la página 10). 2. Quite el ventilador (vea la página 19). 3. Quite el cable de la bujía. 4. Quite la bujía del quemador con una llave de boca de 13/16". 5. Afloje la tuerca abocinada con una llave de boca de 3/4". Empuje el tubo de combustible hacia ...

  • Desa 26 - page 50

    18 099623 Rotor de la bomba (Procedimiento si el rotor se atasca) 1. Quite el casco superior (vea la página 10). 2. Quite los tornillos de la cubierta del extremo del filtro con una llave de tuercas de 5/16". 3. Quite la cubierta del extremo del filtro y los filtros de aire. 4. Quite los tornillos de la placa de la bomba con una llave de tuer ...

  • Desa 26 - page 51

    19 099623 Ventilador IMPORTANTE: Quite el ventilador del eje del motor antes de quitar el motor del calentador. Si el peso del motor se apoya sobre el ventilador, se podría dañar el paso de las paletas del ventilador. 1. Quite el casco superior (vea la página 10). 2. Utilice una llave hexagonal de 1/8" para aflojar el tornillo de fijación ...

  • Desa 26 - page 52

    20 099623 DIAGRAMAS DE ALAMBRADO Ignitor Blanco Marr ó n Azul Verde/amarillo Fotoc é lula Buj í a Control de extinci ó n de llamas B Bot ó n de reposici ó n R Rojo Azul Blanco Azul Blanco Rojo Rojo Anaranjado Tarjeta de bornes Motor Verde/ amarillo Rojo Rel é de arranque del motor Negro S ó 2M ó 3 L ó 1 230V/50Hz Ignitor Blanco Marr ó n ...

  • Desa 26 - page 53

    21 099623 1 2 3 4 7 6 5 DESPIECE ILUSTRADO Y LIST A DE PIEZAS 26,4 Y 44 kW (90,000 Y 150,000 Btu/hr) RUEDAS Y ASAS P ARA MODELOS DE 26,4 Y 44 kW (90,000 Y 150,000 Btu/hr) CANT. CANT. 26,4 kW 44 kW CLAVE NO. PIEZA DESCRIPCION (90,000) (150,000) 1 HA2203 Asas 2 — HA2205 Asas — 2 2 M12345-33 Tornillo, #10-24 x 1 3/4" 8 8 3 M 12342-3 Bastidor ...

  • Desa 26 - page 54

    22 099623 DESPIECE ILUSTRADO 8,8 kW (30,000 Btu/hr) 18-1 18-2 18-3 18-4 18-5 18-6 18-7 18-8 18-9 18-10 18-11 18-12 18-13 18-14 18-15 18-16 18-17 18-18 1 2 3 4 5 6 7 8 9 11 12 13 13 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 35 36 37 38 39 14 10 11-1 11-2 11-3 11-4 11-5 33 34 40 41 42 Conjunto de motor y bomba ...

  • Desa 26 - page 55

    23 099623 Esta lista contiene las piezas reemplazables del calentador. Al pedir repuestos, asegúrese de proporcionar el modelo y número de serie correctos (obtenidos de la chapa del número de modelo) y el número de pieza y descripción de la pieza deseada. LIST A DE PIEZAS 8,8 kW (30,000 Btu/hr) CLAVE NO. PIEZA DESCRIPCION CANT. 1 M51104-01 Asa ...

  • Desa 26 - page 56

    24 099623 DESPIECE ILUSTRADO 20,5 kW (70,000 Btu/hr) 18-1 18-2 18-3 18-4 18-5 18-7 18-8 18-9 18-10 18-11 18-12 18-14 18-15 18-16 18-18 18-17 18-6 18-13 1 2 4 3 5 6 7 8 10 11 12 12 14 15 16 (2) 17 20 18 19 21 22 24 25 26 27 28 29 30 31 32 34 38 37 41 13 9 33 35 36 42 43 39 40 23 44 10-1 10-2 10-7 10-6 10-4 10-3 10-5 Conjunto del quemador Conjunto de ...

  • Desa 26 - page 57

    25 099623 LIST A DE PIEZAS 20,5 kW (70,000 Btu/hr) Esta lista contiene las piezas reemplazables del calentador. Al pedir repuestos, asegúrese de proporcionar el modelo y número de serie correctos (obtenidos de la chapa del número de modelo) y el número de pieza y descripción de la pieza deseada. CLAVE NO. PIEZA DESCRIPCION CANT. 1 M51104-01 As ...

  • Desa 26 - page 58

    26 099623 1 2 3 4 5 7 8 9 10 11 12 13 14 15 16 (2) 17 18 19 20 25 26 29 30 31 32 33 34 35 36 37 38 39 40 41 6 42 43 21 22 23 24 45 44 27 28 46 DESPIECE ILUSTRADO 26,4 kW (90,000 Btu/hr) 13-1 13-2 13-3 13-6 13-7 13-8 13-9 13-10 13-11 13-12 13-15 13-16 13-17 13-18 13-14 Conjunto de motor y bomba 8-2 8-6 8-5 8-4 8-3 8-1 Conjunto del quemador 8-7 13-4 ...

  • Desa 26 - page 59

    27 099623 LIST A DE PIEZAS 26,4 kW (90,000 Btu/hr) Esta lista contiene las piezas reemplazables del calentador. Al pedir repuestos, asegúrese de proporcionar el modelo y número de serie correctos (obtenidos de la chapa del número de modelo) y el número de pieza y descripción de la pieza deseada. CLAVE NO. PIEZA DESCRIPCION CANT. 1 098511-66 Ca ...

  • Desa 26 - page 60

    28 099623 1 2 3 4 5 7 8 9 10 11 12 13 14 15 16 17 18 19 20 22 9 23 24 25 26 27 28 29 30 31 13 32 9 32 33 33 34 9 35 36 37 40 41 42 43 9 45 47 9 48 44 49 50 51 32 52 6 39 38 21 53 9 54 46 DESPIECE ILUSTRADO 44 kW (150,000 Btu/hr) 8-7 8-6 8-5 8-4 8-3 8-2 8-1 Conjunto del quemador 8-8 22-2 22-1 22-3 22-4 22-5 22-6 22-7 22-8 22-9 22-10 22-11 22-12 22-1 ...

  • Desa 26 - page 61

    29 099623 Esta lista contiene las piezas reemplazables del calentador. Al pedir repuestos, asegúrese de proporcionar el modelo y número de serie correctos (obtenidos de la chapa del número de modelo) y el número de pieza y descripción de la pieza deseada. LIST A DE PIEZAS 44 kW (150,000 Btu/hr) CLAVE NO. PIEZA DESCRIPCION CANT. 1 098511-68 Cas ...

  • Desa 26 - page 62

    30 099623 ACCESORIOS Obtenga los accesorios a través del concesionario en su localidad. JUEGO DE RUEDAS Y ASA DE SERVICIO SEVERO - HA1202 Para aplicaciones de servicio severo. Hace el calentador más portátil y conveniente. Para los modelos de 8,8/20,5 kW (30/70,000 Btu/hr) MANOMETRO DE AIRE - HA1180 Para todos los modelos. Herramienta especial p ...

  • Desa 26 - page 63

    31 099623 NOT A ...

  • Desa 26 - page 64

    32 099623 GARANTIA Y REP ARACIONES CERTIFICADO DE GARANTIA LIMITADA DE 90 DIAS PARA EQUIPO GENERAL Printed in U.S.A. 099623-01 Rev. E 6/95 COMERCIABILIDAD DE ESTE PRODUCTO PARA ALGUN PROPOSITO ESPECIFICO. EN TODO CASO, LAS GARANTIAS IMPLICITAS, INCLUYENDO LAS DE COMERCIABILIDAD E IDONEIDAD PARA UN PROPOSITO ESPECIFICO, SE LIMITAN A LA DURACION DE L ...

Manufacturer Desa Category Air Conditioner

Documents that we receive from a manufacturer of a Desa 26 can be divided into several groups. They are, among others:
- Desa technical drawings
- 26 manuals
- Desa product data sheets
- information booklets
- or energy labels Desa 26
All of them are important, but the most important information from the point of view of use of the device are in the user manual Desa 26.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Desa 26, service manual, brief instructions and user manuals Desa 26. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Desa 26.

Similar manuals

A complete manual for the device Desa 26, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Desa 26 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Desa 26.

A complete Desa manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Desa 26 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Desa 26, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Desa 26, that we can find in the current document
3. Tips how to use the basic functions of the device Desa 26 - which should help us in our first steps of using Desa 26
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Desa 26
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Desa 26 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Desa 26?

Use the form below

If you did not solve your problem by using a manual Desa 26, ask a question using the form below. If a user had a similar problem with Desa 26 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)