Manual Kenmore 010

90 pages 7.2 mb
Download

Go to site of 90

Summary
  • Kenmore 010 - page 1

    dFgO 3T_EmbroiderylSewing Mach ine Owner's Manual Model 385,19010200 Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A. www.sears.com 851-81%004 Sears Canada Inc., Toronto, Ont., i5S 288 www.sears.ca ...

  • Kenmore 010 - page 2

    IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic safety precautions should always be followed, including the followings: Read all instructions before using this appliance. DAN G E R- To reduce the risk of electric shock: 1. An appliance should never be left unattended when plugged in. Always unplug this sewing machine from th ...

  • Kenmore 010 - page 3

    PROTECTION AGREEMENTS In the U.S.A. Master Protection Agreements Congratulations on making a smart purchase. Your new Kenmore ® appliance is designed and manufactured for years of dependable operation. But like all products, it may require preventive maintenance or repair from time to time. That's when having a Master Protection Agreement can ...

  • Kenmore 010 - page 4

    S Machine Specifications Item Sewing speed (Maximum): Stitch length: Stitch width: Stitch package (Stitch functions): (Built-in stitches): Buttonhole: Machine dimensions: Weight (Net): Specification Over 820 s.p.m. 5 mm (Maximum) 7 mm (Maximum) 1160 Conventional 673 built-in stitches with 447 built-in embroidery design 1 step built-in buttonhole W ...

  • Kenmore 010 - page 5

    TABLE OF CONTENTS SECTION I. NAME OF PARTS Names of Parts ............................................................... 2 Available Accessories and Attachments ......................... 3 SECTION I1. GETTING READYTO SEW Connecting Machine to Power Supply ............................ 4 Before Using Your Sewing Machine ............................. ...

  • Kenmore 010 - page 6

    TABLE OF CONTENTS • To repeat buttonhole sewing ..................................... 38 • Changing buttonhole width ....................................... 39 • Changing buttonhole stitch density ........................... 39 Corded Buttonhole ........................................................ 40 • To sew ........................... ...

  • Kenmore 010 - page 7

    TABLE OF CONTENTS • Fabric color change .................................................. 72 • Thread color change ................................................. 73 Pattern Combination (example 1) ................................. 74 Sewing Results ............................................................. 74 Pattern Combination (example ...

  • Kenmore 010 - page 8

    SECTION I. NAME OF PARTS s Names of Parts Flip-top quick reference chart Bobbin winder spindle Bobbin thread cutter Spool holder (Large) Spool pin Upper thread guide Pressure dial Thread take-up lever Thread tension dial Face cover @ Thread cutter/holder Built-in needle threader Needle plate Hook cover plate Hook cover plate release button Extensio ...

  • Kenmore 010 - page 9

    Available Accessories and Attachments To order parts and accessories listed below, call: 1-800-366-PART (1-800-366-7278) 6 am - 11 pm, CST, 7 days a week When ordering parts and accessories, provide the following information: 1. Part Number 2. Part Name 3. Model Number of Machine Ref. No. 39 Pad No. *102869107 102403109 850807101 *993010900 *993001 ...

  • Kenmore 010 - page 10

    SECTION II. GETTING READY TO SEW Connecting Machine to Power Supply (_ Power supply plug Power switch Outlet Red marker (_ Foot control (_ Foot control plug Machine socket 1. Turn off the power switch @. Insert the foot control plug into the machine socket (_. 2. Insert the power supply plug _ into the outlet _. 3. Turn the power switch @ to turn o ...

  • Kenmore 010 - page 11

    Machine Operating Buttons Start/stop Button Start/stop button Press the button to start or stop the machine. This button can be used either in conventional sewing mode or Embroi- dery mode. In conventional sewing mode, the machine starts running slowly for the first few stitches; it then runs at the speed set by the speed control lever. Note: The S ...

  • Kenmore 010 - page 12

    Foot Control Sewing speed can be varied by the foot control. The harder you press on the foot control, the faster the machine runs. Note: The machine runs atthe maximum speed set bythe speed controllever when the footcontrolis being fully depressed. Operation Instructions: Foot Controller Model 21371 is used with Sewing Machine Model 385.19010XXX ( ...

  • Kenmore 010 - page 13

    Extension Table • Detaching the table Close the accessory box, and lift out the extension table (_ toward you, as illustrated, for "_ree-arm" sewing. (_ Extension table • Attaching the table Push the extension table (_ until it snaps into the machine. (_ Extension table Tabs Holes Free-arm sewing can be used for: • Stitching sleeves ...

  • Kenmore 010 - page 14

    Thread Cu_er s (_Thread cuter You do not need a pair of scissors to cut threads after sewing. Just use the built-in thread cutter (_. Changing Needle Flat side Needle clamp screw Needle clamp Turn offthe power switch. Raise the needle to its highest position by turning the handwheet counterclockwise, toward you, and lowering the presser foot. Loose ...

  • Kenmore 010 - page 15

    Correcting Distorted Stitch Patterns The sewing results of the stretch stitch patterns may vary depending upon the sewing conditions, such as sewing speed, type of the fabric, number of layers etc. Always make test sewing on a scrap piece of the fabric that you wish to use. if decorative stitch patterns, letters, or numbers are distorted, correct i ...

  • Kenmore 010 - page 16

    Presser Foot Types • zigzag foot (Foot A) Use this foot for both straight and zigzag stitching. • Straight stitch foot (Foot H) Use this foot for exclusively for straight stitching with center needle position. • Automatic buttonhole foot (Foot R) Use this foot for one step automatic buttonhole sewing. Simply set a button on the guide of this ...

  • Kenmore 010 - page 17

    • 1/4"Seam foot (Foot O) This foot is useful for patchwork quilt. The guide on the foot maintains an exact 1/4" (0.7 cm) seam allowance. S • Embroidery foot (Foot P) This foot is a special attachment for professional-style embroidery. J • Walking foot This is special attachment for hard-to-feed materials. This foot effectively preve ...

  • Kenmore 010 - page 18

    Selecting Needle and Fabric For general sewing, use needle sizes 11 or 14. A fine thread and needle should be used for sewing lightweight fabrics, so the fabric will not be marred. Heavy fabrics require a needle large enough to pierce the fabric without fraying the needle thread. In the needle set, there is one each of sizes 11, 14, 16, and 18, and ...

  • Kenmore 010 - page 19

    Bobbin Winding • Removing the hook cover plate Hook cover plate release button Hook cover plate Bobbin Slide the hook cover plate release button _ to the right, and remove the cover plate _. Lift out the bobbin _ from the bobbin holder. • Horizontal spool pin Spool pin Large spool holder Small spool holder Lift up the spool pin _. Place a spool ...

  • Kenmore 010 - page 20

    Bobbin Winding Note: Set the speed control lever at its fastest position for bobbin winding. _) Upper thread guide Bobbin Bobbin winder spindle Guide the thread around the upper thread guide _). Insert the thread through the hole on the bobbin _, threading from the inside to the outside. Put the bobbin on the bobbin winder spindle _. Push the bobbi ...

  • Kenmore 010 - page 21

    • Inserting the bobbin End of thread Notch Notch Threading diagram Place a bobbin in the bobbin holder with the thread running off counterclockwise. Guide the thread into the notch _ on the front side of the bobbin holder. Draw the thread to the left, sliding it between the tension spring blades. Continue to draw the thread lightly until the thre ...

  • Kenmore 010 - page 22

    Threading the Machine • Threading the machine * Raise the thread take-up lever to its highest position by turning the handwheel counterclockwise. * Raise the presser foot lifter. * Place a spool on the spool pin, with the thread coming off from the bottom toward the front of the sewing machine. Draw the end of the thread around the upper thread g ...

  • Kenmore 010 - page 23

    • Drawing up bobbin thread (_ Up/down needle button Raise the presser foot. Hold the needle thread lightly with your left hand. Press the up/down needle button _ twice to bring the bobbin thread up. Draw up the needle thread to bring up a loop of the bobbin thread. Pull both threads 4" to 6" (10.0 to 15.0 cm) under and behind the presse ...

  • Kenmore 010 - page 24

    SECTION II1. CONVENTIONAL SEWING Visual Touch Screen The "Kenmore Elite" display appears on the visual touch screen for a few seconds when turning the machine on, then it shows the initial screen as illustrated. Mode Selection Keys (_ Mode key Press mode key _ to enter the Mode selection. Conventional sewing mode key Press this key to ent ...

  • Kenmore 010 - page 25

    Pattern Selection Press the stitch pattern indication key to select the desired stitch pattern. (_ Name of stitch Stitch image Selected needle type (single or twin) Suitable pressure dial number (_ Suitable thread tension number (_ Sound mark (the mark will disappear when the sound volume set to 0) Suitable presser foot Utility Stitches When you pr ...

  • Kenmore 010 - page 26

    Machine Settings When you press the SET key, the following four mode keys will be displayed and you can customize settings within each mode. You can select your desired mode by pressing the corresponding key. Common set mode In this mode, machine operation and function (screen contrast, beep sound, etc.) can be adjusted and set for both embroidery ...

  • Kenmore 010 - page 27

    (_ Inch/millimeter You can set your machine's measuring unit to either "inch" or "millimeter" depending upon your preference. The default measuring unit setting is "inch". Press ii" _) or m_ _ key to select the unit you prefer. Key position adjustment If you think the touch panel keys are out of alignment, yo ...

  • Kenmore 010 - page 28

    Straight Stitch (_ Stitch pattern: 1 or 2 Needle thread tension 2 to 6 Presser foot A: Zigzag foot Presser foot H: Straight stitch foot (_) Pressure dial 3 Note: When using the straight stitch foot, make sure to adjust the needle position to 3.5. Otherwise the needle may hit the sewing foot and possibly break. S i¸ ii ¸, ® • To sew Raise the p ...

  • Kenmore 010 - page 29

    • Needle plate guide line The seam guides on the needle plate and hook cover plate help you to measure seam allowance. The number marks on the needle plate indicate the distance between the center needle position and the edge of the fabric. There are marks for 15 mm, 20 mm, 4/8 in., 5/8 in. and 6/8 in. S • To sew from the edge of thick fabric B ...

  • Kenmore 010 - page 30

    Quilting with Walking Foot The walking foot is effective in preventing the fabric (light materials, knits, real and imitation leather etc.) from slipping or puckering, because it sandwiches the material between the upper and the lower feed dog on the machine. The quilting bar can also be attached on the walking foot to make it easier to sew evenly ...

  • Kenmore 010 - page 31

    • Changing needle drop position _j_ + key ®-key 0.0 (left position) (_ 3.5 (center position) 7.0 (right position) Needle drop position is adjusted with the _ and -- keys. When you press the ÷ key, the needle moves to the right. When you press the -- key, the needle moves to the left. • Changing stitch length _j_ + key Q-key ® 1.0 _)5.0 Stitc ...

  • Kenmore 010 - page 32

    Adjust the Needle Thread Tension for Straight Stitch • Correct tension Needle thread (Top thread) Bobbin thread (Bottom thread) To loosen (_ To tighten The ideal straight stitch has threads locked between two layers of fabric, as illustrated (magnified to show detail). If you look at the top and bottom of a seam, notice that the stitches are even ...

  • Kenmore 010 - page 33

    Variety of Straight Stitches Lock-a-matic Stitch Stitch pattern: 3 Needle thread tension 2 to 6 Presser foot A: Zigzag foot Presser foot H: Straight stitch foot Pressure dial 3 Use this stitch to secure the beginning and the end of a seam with backstitching. Press pattern 3 on the visual touch screen. When you reach the end of the seam, press the r ...

  • Kenmore 010 - page 34

    Stretch Stitch Stitch pattern: 10 Needle thread tension 3 to 6 Presser foot A: Zigzag foot Pressure dial 3 This is a narrow stretch stitch designed to eliminate puckering on knit fabrics and bias seams, while permitting the seam to be pressed completely open flat. Basting Stitch Stitch pattern: 15 Needle thread tension 1 to 4 Presser foot A: Zigzag ...

  • Kenmore 010 - page 35

    • Fabric preparation Right (top) side of fabric Wrong (bottom) side of fabric Bottom seam Zipper bottom stop position Basting stitch Place the right (top) sides of the fabric _ together. Sew a bottom seam _ 5/8" (2.2 cm) from the right edge to the estimated zipper bottom stop position _. Sew in reverse a few stitches to lock. Increase the st ...

  • Kenmore 010 - page 36

    Zigzag Stitch Stitch pattern: 6 Needle thread tension 3 to 7 Presser foot A: Zigzag foot Pressure dial 3 The zigzag stitch is one of the most common and versatile stitches. It can be a utility stitch for button sewing, buttonhole making, hemming, overcasting, mending and darning. It can also be used to decorate with trims, appliques and cut work or ...

  • Kenmore 010 - page 37

    • Changing stitch width _+key Q-key Stitch width Stitch width is adjusted with the + and keys. The larger the number, the wider the stitch width. Press the ÷ key to increase the stitch width. Press the -- key to decrease the stitch width. • Changing stitch length _+key Q-key Stitch length Stitch length is adjusted with the + and -- keys. The l ...

  • Kenmore 010 - page 38

    Adjust the Needle Thread Tension for Zigzag Stitch For an ideal zigzag stitch, the bobbin thread does not show on the right side (Top side) of the fabric, and the needle thread shows slightly on the wrong side (Bottom side) of the fabric. See the illustrations for the correct appearance. To match this appearance, adjust the needle tension. • Corr ...

  • Kenmore 010 - page 39

    Variety of Overcasting Stitches Overedge Stitch Stitch pattern: 8 Needle thread tension 3 to 7 Presser foot C: Overedge foot Brush holder seam guide Presser foot A: Zigzag foot Pressure dial 3 This stitch is often used as a seam finish to prevent fraying. If using a zigzag foot, start overedging with the leftmost needle position about 1/8" (0. ...

  • Kenmore 010 - page 40

    Serging Stitch pattern: 9 Needle thread tension 3 to 7 Presser foot A: Zigzag foot Pressure dial 3 ./ f / / ® This stitch is recommended for finishing edges of knit fabrics such as tricots, stretch velour etc., because it provides the greatest amount of elasticity and strength. Sew along the fabric edge leaving a 1/4" (0.7 cm) seam allowance. ...

  • Kenmore 010 - page 41

    Blind Hem Stitch Stitch pattern: 12 Needle thread tension 1 to 4 Presser foot G: Blind hem foot Pressure dial 3 S i ® Use the same color thread as the fabric. On heavy weight fabrics that ravel, the raw edge should be overcast first. Fotd the hem, as illustrated. Wrong side (Bottom side) of fabric 1/4" to 7/16" (0.4 to 0.7 cm) Light weig ...

  • Kenmore 010 - page 42

    SECTION IV. BUTTONHOLE s Various kinds of buttonholes and their uses (_ Square BH This square buttonhole is widely used on medium to heavy fabrics. The buttonhole size is automatically determined by placing a button in the foot. Round end BH This buttonhole is used on fine to medium weight fabrics, especially for blouses and children's clothes ...

  • Kenmore 010 - page 43

    Square BH (_ Stitch pattern: 16 Needle thread tension 1 to 5 Presser foot R: Automatic buttonhole foot Pressure dial 3 • Preparation for sewing Groove Pin Press up/down needle button to raise the needle. Attach the automatic buttonhole foot R. Make sure the groove (_ on the foot holder catches the pin _ on the foot when lowering the presser bar. ...

  • Kenmore 010 - page 44

    Press the start/stop button to sew the buttonhole. The buttonhole wilt be automatically sewn. Step 1 : The machine will sew the front bartack and the left row first. Then it goes back to the starting point with straight stitch. Step 2: The machine will sew the right row. Step 3: The machine will sew the back barrack, and the machine will stop autom ...

  • Kenmore 010 - page 45

    • Changing buttonhole width Press the _!!!, key. The adjusting window opens. The adjusting window displays the -F and -- keys for buttonhole width adjustment. Press the + key to increase the buttonhole width. Press the _ key to decrease the buttonhole width. Press the _key to register the settings. Note: The default setting is 5.0. • Changing b ...

  • Kenmore 010 - page 46

    Corded Buttonhole Stitch pattern: 16 Needle thread tension 1 to 5 Presser foot R: Automatic buttonhole foot (_ Pressure dial 3 Use the same procedure as the square buttonhole procedure. * Set the stitch width to match the thickness of the cord used. • To sew With the buttonhole foot raised, hook the filler cord on the spur at the back of the butt ...

  • Kenmore 010 - page 47

    Darning Stitch pattern: 23 Needle thread tension 3 to 6 Presser foot R: Automatic buttonhole foot Pressure dial 3 S @ ® • To sew Button holder Select the pattern 23. Pull the button holder _ fully to the rear. Place the garment under the foot. Press the up/down needle button twice. Remove the fabric to the left to draw both threads under the foo ...

  • Kenmore 010 - page 48

    Tacking (_ Stitch pattern: 24 Needle thread tension 3 to 6 Presser foot F: Satin stitch foot Pressure dial 3 Tacking is used to reinforce pockets, crotches and belt carriers where extra strength is needed. Select pattern 24 and attach the satin foot E The machine wilt sew a tacking of 9/16" (1.5 cm) length automatically. 9/16" (1.5 cm) No ...

  • Kenmore 010 - page 49

    Eyelet Stitch pattern: 25 Needle thread tension 1 to 4 Presser foot F: Satin stitch foot Pressure dial 3 The eyelet is used for belt holes etc. Press pattern 25 on the visual touch screen. • To sew Attach the satin stitch foot E Depress the foot control to sew. The machine wilt stop automatically when completed. Open the eyelet with an awl, punch ...

  • Kenmore 010 - page 50

    SECTION V. SATIN, DECORATIVE STITCHES AND MONOGRAMMING Key Functions Mode key Press ,_ key to enter the mode selection. Twin needle key Press key to enter the twin needle sewing mode. Needle up/down key Press the ! key to set the needle position up or down when stopping the machine. Adjust key Press the key to open the adjusting window. Stitch widt ...

  • Kenmore 010 - page 51

    Program key Press _, key to program pattern combination. When you press this key the following function keys will be displayed. Cursor keys Press the keys to move the cursor to right or left. You can select a pattern to delete, select a position to insert another pattern. Delete key Press the keys to move the cursor under the pattern you would like ...

  • Kenmore 010 - page 52

    One Cycle Pattern Sewing Example: pattern 28, LS (_ Stitch pattern: 28, L.S Needle thread tension 3 to 4 Presser foot F: Satin stitch foot Pressure dial 3 • To sew Press the _* key. Select pattern 28 Select pattern L.S. Start the machine to sew. The machine will sew to end of the pattern and lock the stitches, then stop automatically. S M_j f- I ...

  • Kenmore 010 - page 53

    Programming Pattern Combination Example: pattern 28 and 31 Stitch pattern: 28, 31 Needle thread tension 3 to 4 Presser foot F: Satin stitch foot Pressure dial 3 • To sew Press the key. Select pattern 28. Select pattern 31. Start to sew. The machine will sew the pattern combination repeatedly. Note: If you press the auto-lock button in the middle ...

  • Kenmore 010 - page 54

    Programming French Knot Example: pattern 51, 39, 40 Stitch pattern: 51, 39, 40 Needle thread tension 3 to 4 Presser foot F: Satin stitch foot Pressure dial 3 S • To sew Pattern 39 Pattern 40 Press _ key. Select pattern 51 (French knot). Select pattern 39. Select pattern 51. Select pattern 40. Start to sew. The machine will sew the pattern combina ...

  • Kenmore 010 - page 55

    To Sew from the Beginning of a Combination Pattern with Beginning Key Example: pattern 30 (_ Stitch pattern: 28, 32, 70 Needle thread tension 3 to 4 Presser foot F: Satin stitch foot Pressure dial 3 • To sew Press the key. Select pattern 28. Select pattern 32. Select pattern 70. Start to sew (_. Press start/stop key in the middle of a programmed ...

  • Kenmore 010 - page 56

    Individual Pattern Adjustment Example:patterns 28, 30 and 32 Stitch pattern: 28, 30, 32 Needle thread tension 3 to 4 Presser foot F: Satin stitch foot Pressure dial 3 You can adjust the stitch width, stitch length and elongation ratio of each pattern in a combination individually. Change the elongation ratio of pattern 28 in the combination of patt ...

  • Kenmore 010 - page 57

    Program Check • Example: To check the combination of patterns 64, 70, 30, 26, 31 and 38. When the entire pattern combination is not displayed, press the key to view the remaining patterns in combination. Press the key _ to go back to the original window. Number of page Return key Page key Note: The _ key _ will be grayed out if there is no other ...

  • Kenmore 010 - page 58

    Saving and Opening a File • Saving a file Save file key When you press the key _, the save rite window will open. Press the _ key, to select the location of either the internal memory of the sewing machine or a Compact Flash Card (adapter required). When you press the _j !.;_ keys, you will be able to see the saved files in the previous and next ...

  • Kenmore 010 - page 59

    Opening a Saved File Open file key Open file window When you press the .o_o; key, and then _ key _, the open file window _ will appear. You can open the file to sew the programmed patterns that you have saved. Press the _&_ key to select the location of the file directory, either in the internal memory of the machine or in the PC-Card. Press th ...

  • Kenmore 010 - page 60

    MONOGRAMMING (_ Font key When you press key, the font selection window opens. The following 2 fonts and symbols are available. Block type Script type Press the desired font key to select the font or symbol. OK key When you press _/key the desired font wilt be selected. Cursor key This key is for editing your monogram. Press the _ key to move the cu ...

  • Kenmore 010 - page 61

    Programming a Monogram Example: Programming in block type Press the key and select block type letter. Press _ key and select upper case. Press key and select large size. Press "R". The cursor shifts to the right and "R" is automatically memorized. Press !_i key. Press key and select small size. Press "&", the curso ...

  • Kenmore 010 - page 62

    SECTION VI. EMBROIDERY Getting Ready to Sew Embroidery • Embroidery Hoop F This is the standard size hoop, with 5.0" X 4.3" (126 mm X 110 mm) embroidery area for standard size embroidery designs. • Instruction for template Starting point for the built-in embroidery designs. Starting point for horizontal monogramming in the left justif ...

  • Kenmore 010 - page 63

    Stabilizer To obtain the best quality embroidery, it is important to use stabilizers. Types of Stabilizer • Tear-away stabilizer Tear-away stabilizer is made from a fiber that will tear easily. Use tear-away stabilizers for stable woven fabrics. After stitching, tear away the stabilizer so that the small portion left in the back of the stitching ...

  • Kenmore 010 - page 64

    To Set the Fabric in the Embroidery Hoop Mark the reference lines _ on the right side of the fabric where you wish to sew the design as illustrated using tailor's chalk. Reference lines Place the template on the fabric by matching the reference lines on the template to the reference lines you previously marked on the fabric. Tape the template ...

  • Kenmore 010 - page 65

    To Attach the Embroidery Hoop to the Machine Turn the attaching knob _ so it is parallel with the hoop, and set it on the carriage. Attach the hoop by fitting the pins _ into the carriage holes _, and turn the attaching knob _ clockwise to secure the hoop. Attaching knob Pins Carriage holes Notes: • Always provide sufficient clearance for the emb ...

  • Kenmore 010 - page 66

    Built-in Embroidery Designs (_ Embroidery mode key Press the embroidery mode key (_ to enter the Embroidery mode. The built-in embroidery designs are displayed on the visual touch screen when you select the professional style embroidery mode. The following 5 categories are available on the embroidery mode. Built-in designs There are 22 built-in des ...

  • Kenmore 010 - page 67

    Embroidery Mode Set To customize a setting within Embroidery mode, press embroidery mode setting key (_. Embroidery mode setting key Embroidery maximum speed The maximum sewing speed can be changed from 400 to 650 spm for embroidery sewing. The default setting is 650 spm. Press the -- key to reduce the maximum sewing speed. Press the _ key to incre ...

  • Kenmore 010 - page 68

    Embroidery Screen When you select an embroidery design, the visual touch screen will show the design's parts and their sequence numbers, the thread color code, the presser foot to use, sewing time, number of colors needed and the embroidery's actual measurements. When you press the start/stop button, the machine will automatically start s ...

  • Kenmore 010 - page 69

    Return carriage key Press the _ikey to bring the carriage back to its home position after finishing embroidery. Note: ] Before you turn the power switch off in Embroidery mode, / always be sure to press the key to return the carriage / to its home position. _ ....... J Return key When you press the ._ key, the previous pattern selection screen will ...

  • Kenmore 010 - page 70

    Starting to Sew Embroidery Loose thread Lower the presser foot, press the start/stop button and sew 5 to 6 stitches. Press the start/stop button again to stop the machine. Raise the presser foot, cut off the loose thread (_ close to the starting point and lower the presser foot. Press the start/stop button to start sewing again and the machine will ...

  • Kenmore 010 - page 71

    Monogram Embroidery Press embroidery mode key, and press the monogram key. The monogram selection screen will appear and Gothic upper case alphabet font will automatically be selected. Monogram Selection Screen In the monogram selection window, you can program words by pressing the alphabet keys directly. After you press an alphabet key, the letter ...

  • Kenmore 010 - page 72

    @ OK key The selected letter/number/symbol monogram combination is confirmed by pressing the oK key. After the oK key is pressed the screen will change to the embroidery screen. @ Upper/lower ease key You can select upper or lower case letters by pressing the key. @ Letter size key You can choose three different sizes of letters: large, medium and ...

  • Kenmore 010 - page 73

    2-letter Monogram Press the Embroidery mode key and press the monogram key. Example: 2-Letters with a crest Crest keys Press !_ key. Select 2-letters and press the crest key. Select the letter "A". The cursor wilt move to the right. Select the letter "B". The cursor will move to the right. Press the °Kkey and the screen will ch ...

  • Kenmore 010 - page 74

    ATA PC Card • To insert the ATA PC card Insert the SanDisk ® CompactFlash that contains saved stitch data into the SanDisk _ CompactFlash PC card adapter.Then insert the adapter into the slot with the front side of card (_ facing you. Push the card until it clicks, then the eject button @ pops out. (_ SanDisk ® CompactFlash PC card When the car ...

  • Kenmore 010 - page 75

    Reader/writer 19000 You can download embroidery designs from model 19000 series memory card library via card reader/writer 19000 to your Kenmore 19010. Note: The Readedwdter 19000 is sold separately. • Connecting Reader/writer 19000 insert the RS-232C cable _ into the RS-232C connector of the machine. insert the two plugs into the card reader/wri ...

  • Kenmore 010 - page 76

    Edit Mode In the edit mode, you can edit and combine designs to create your original embroidery. Press the embroidery mode key (_ and edit key _ to open the edit mode window. (_ Embroidery mode key Edit key Pattern Selection Windows in the Edit Mode You can open the built-in designs, monogram, and designs from the ATA PC card in the edit mode. When ...

  • Kenmore 010 - page 77

    Cancel Key When you press the _!_, key, any changes that have been made to the selected pattern wilt be cancelled. Cancel key Note: When there is more than one pattern on the edit screen, you need to select the pattern that you wish to edit. Resizing the Selected Pattern By pressing the s_ key, you may enlarge and reduce the size of the embroidery ...

  • Kenmore 010 - page 78

    Rotating the Selected Pattern Each time you press the _ key, the embroidery pattern will rotate 45 ° clockwise. (_ Rotation key Delete Key When you press the _ key, the selected pattern will be deleted. Delete key Changing the Fabric and Thread Colors You can change the background color of the edit screen to simulate the fabric color that you are ...

  • Kenmore 010 - page 79

    • Thread color change In this window you are able to change the assigned thread color of the selected part of the pattern. Select the pattern and press the _?_ key to open the thread color change window. Select the part you wish to change thread color by pressing the color/part key (_. (_ Color/part key Select the desired color with the _ _J keys ...

  • Kenmore 010 - page 80

    Pattern Combination (Example 1) Select built-in pattern 3. Press the edit key. Press the layout keys (_ to move the pattern down and to the left. Press the _i key _ 5 times to rotate the pattern as illustrated. Return to the pattern selection window and select built-in pattern 3 again. Press the layout keys (_ again, then adjust the pattern down an ...

  • Kenmore 010 - page 81

    Pattern Combination (Example 2) Select built-in pattern 20. Press the edit key. Open the built-in design window and select pattern 1. Edit key The screen returns to the edit mode window and pattern 1 will be displayed on the edit screen. With the layout keys _, move pattern 1 on to the outline of pattern 20. Layout keys Select pattern 1 again and l ...

  • Kenmore 010 - page 82

    Select the built-in pattern 20 on the editscreen. Press the _ key. Press the oK key. Delete key (_ OK key The patterns in the edit screen arecombined andwilt be shown in the preview window as one design. The colodpart key of the new combined design will also be shown. Sewing Results The embroidery stitch pattern is sewn as shown against the centedi ...

  • Kenmore 010 - page 83

    (Blank page) 77 ...

  • Kenmore 010 - page 84

    SECTIONVll. NORMAL MAINTENANCE s CAUTION: • Unplug the machine. • Do not dismantle the machine other than as explained in this section. • Do not store the machine in a high-humidity area, near a heat radiator, or in direct sunlight. • Clean the outside of the machine with a soft cloth and mild soap. The model 19010 is equipped with dual sew ...

  • Kenmore 010 - page 85

    Cleaning the Hook Area Press the up/down needle button to raise the needle, then unplug the sewing machine. Remove the set screw _ on the left hand side of the needle plate _ with the screwdriver supplied with the machine. Remove the needle plate @. Take out the bobbin. Lift up the bobbin holder _ and remove it. Clean the bobbin holder with a lint ...

  • Kenmore 010 - page 86

    STITCH/DESIGN CHART Conventional Sewing O0 130 r-i L.S 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 2g 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 48 47 48 49 50 51 J I I I I I III 2 13 16 I 2 I 3 I 6 IiIiI1_ + + 52 53 54 55 58 57 58 'I' III III 65 66 67 68 69 70 71 78 79 80 81 82 83 84 91 92 93 ...

  • Kenmore 010 - page 87

    STITCH/DESIGN CHART Built-in Embroidery Designs 01 02 03 06 07 08 09 10 11 12 16 j_ 18 2O 19 21 Built-in Embroidery Monogram Gothic Script Chel_nham J 81 ...

  • Kenmore 010 - page 88

    Troubleshooting f Condition Cause Reference Noisy operation. The needle thread breaks. Page 79 Page 79 Page 16 Pages 26, 32 Page 8 Page 8 Page 12 1. Threads have been caught in the hook mechanism. 2. The feed dog is packed with lint. 1. The needle thread is not threaded properly. 2. The needle thread tension is too tight. 3. The needle is bent or b ...

  • Kenmore 010 - page 89

    Troubleshooting A Condition Patterns are distorted. Pattern selection key does not work. Cause Reference 1. The correct presser foot is not used. 2. The needle thread tension is too tight. 3. The embroidery hoop attaching knob is loose. 4. The carriage is bumping into something around the machine. 5. The fabric is not pulled tightly enough on the e ...

  • Kenmore 010 - page 90

    Get it fixed, at your home or ours! Your Home For repair-in your home-of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! For the replacement parts, accessories and owner's manuals that you need to do-it-yourself. For Sears professional installation of home app ...

Manufacturer Kenmore Category Sewing Machine

Documents that we receive from a manufacturer of a Kenmore 010 can be divided into several groups. They are, among others:
- Kenmore technical drawings
- 010 manuals
- Kenmore product data sheets
- information booklets
- or energy labels Kenmore 010
All of them are important, but the most important information from the point of view of use of the device are in the user manual Kenmore 010.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Kenmore 010, service manual, brief instructions and user manuals Kenmore 010. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Kenmore 010.

Similar manuals

A complete manual for the device Kenmore 010, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Kenmore 010 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Kenmore 010.

A complete Kenmore manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Kenmore 010 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Kenmore 010, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Kenmore 010, that we can find in the current document
3. Tips how to use the basic functions of the device Kenmore 010 - which should help us in our first steps of using Kenmore 010
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Kenmore 010
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Kenmore 010 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Kenmore 010?

Use the form below

If you did not solve your problem by using a manual Kenmore 010, ask a question using the form below. If a user had a similar problem with Kenmore 010 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)