Manual Grundig GV 460 VPT / NIC

168 pages 8.75 mb
Download

Go to site of 168

Summary
  • Grundig GV 460 VPT / NIC - page 1

    SER VICE MANUAL Änderungen vorbehalten Printed in Germany Service Manual Sach-Nr. 72010-514.90 Subject to alteration VK 222/1  1093 Service Manual Part No. 72010-514.90 * Service Manual Sach-Nr./Part no. 72010-514.90 PAL PAL SECAM SECAM PAL SECAM GV 440 VPS / NIC GV 450 VPT / GB / NIC GV 4592 VPT / Madrid GV 460 VPT / NIC AV/CV TRACKING PROGRAM ...

  • Grundig GV 460 VPT / NIC - page 2

    1 - 2 GRUNDIG Service-Technik Allgemeiner Teil / General GV44…, GV45…, GV46… Es gelten die Vorschriften und Sicherheitshin- weise gemäß dem Service Manual "Sicherheit", Sach-Nummer 72010-800.00, sowie zusätzlich die eventuell abweichenden, landesspezifischen Vorschriften! The regulations and safety instructions shall be valid as ...

  • Grundig GV 460 VPT / NIC - page 3

    Allgemeiner T eil / General Geräteübersicht / V ideo Recorder Overview 27507-003.30 75988-001.18 27507-001.30 27507-001.32 27507-001.34 27507-001.35 27507-001.36 27507-001.37 27507-001.38 27507-001.39 27507-001.40 27507-001.41 27507-017.01 27599-004.03 29504-201.02 27507-007.30 27507-007.31 27507-007.32 27507-009.30 27507-009.31 27520-160.01 2752 ...

  • Grundig GV 460 VPT / NIC - page 4

    1 - 4 GRUNDIG Service-Technik Allgemeiner Teil / General GV44…, GV45…, GV46… 1 - 4 GRUNDIG Service-Technik Allgemeiner Teil / General GV44…, GV45…, GV46… Meßgeräte / Meßmittel Regeltrenntrafo Farbgenerator Zweikanaloszilloskop Tongenerator Digitalmultimeter Stabilisiertes Netzgerät Millivoltmeter Frequenzzähler Beachten Sie bitte d ...

  • Grundig GV 460 VPT / NIC - page 5

    GV44…, GV45…, GV46… Allgemeiner T eil / General GRUNDIG Service-T echnik 1 - 5 1. Bedienelemente Die Videorecorder auf einen Blick Auf dieser Seite sind die Tasten und Anschlüsse der Video- recorder kurz erklärt. Die Bedienung entnehmen Sie bitte dem jeweiligen Kapitel der Bedienungsanleitung. Hinweis: Dieses Kapitel enthält Auszüge aus d ...

  • Grundig GV 460 VPT / NIC - page 6

    Allgemeiner T eil / General GV44…, GV45…, GV46… 1 - 6 GRUNDIG Service-T echnik 1 ... 0 –––––––– Ziffern-Tasten für verschiedene Einga- ben. u –––––––––––– Wählt das Bild-/Tonsignal eines Satel- litenempfängers an Buchse Ï EURO- AV ¾ für die Aufnahme bzw. die Auf- nahme-Programmierung. ¢ SET –? ...

  • Grundig GV 460 VPT / NIC - page 7

    GV44…, GV45…, GV46… Allgemeiner T eil / General GRUNDIG Service-T echnik 1 - 7 EURO-AV DECODER A2 L H L H x x EURO-AV A1 L R AUDIO L R P A Y-TV Recorder anschließen Recorder an die Antenne anschließen Ziehen Sie das Antennenkabel aus der Antennenbuchse Ihres Fernsehgerätes und stecken Sie es in die Antennenbuchse – II – des Recorders. ...

  • Grundig GV 460 VPT / NIC - page 8

    Allgemeiner T eil / General GV44…, GV45…, GV46… 1 - 8 GRUNDIG Service-T echnik 2. Anschließen und Einstellen Bildqualität verbessern Wenn sich auf dem Bildschirm des Fernsehgerätes Schlan- genlinien zeigen, ist der eingestellte Kanal mit einem Fernseh- Programm belegt. In diesem Fall gehen Sie wie folgt vor : Taste “ 8 am Recorder drück ...

  • Grundig GV 460 VPT / NIC - page 9

    GV44…, GV45…, GV46… Allgemeiner T eil / General GRUNDIG Service-T echnik 1 - 9 2.1 Anschließen und Einstellen Fernseh-Programme einstellen Drücken Sie diese Tasten der Fernbedienung Erläuterungen In der Anzeige am Recorder sehen Sie 4. ATS euro plus-Suchlauf starten “ A TS , Der ATS euro plus-Suchlauf wird ge- startet, das Symbol » « z ...

  • Grundig GV 460 VPT / NIC - page 10

    Allgemeiner T eil / General GV44…, GV45…, GV46… 1 - 10 GRUNDIG Service-T echnik Drücken Sie diese Tasten der Fernbedienung In der Anzeige am Recorder sehen Sie Erläuterungen 2. Sender-Kurzbezeichnung ändern oder neu eingeben für Fernseh- Programme von der Antennen/ Kabelanlage (max. 5 Stellen) a) Programmplatz anwählen S oder A , » I. P ...

  • Grundig GV 460 VPT / NIC - page 11

    GV44…, GV45…, GV46… Allgemeiner T eil / General GRUNDIG Service-T echnik 1 - 11 Drücken Sie diese Tasten der Fernbedienung Erläuterungen 2.1.1 Anschließen und Einstellen Änderungen und Ergänzungen . . . In der Anzeige am Recorder sehen Sie 5. Programmplatz für einen externen Decoder aktivieren a) Programmplatz anwählen S oder A , b) De ...

  • Grundig GV 460 VPT / NIC - page 12

    Allgemeiner T eil / General GV44…, GV45…, GV46… 1 - 12 GRUNDIG Service-T echnik Drücken Sie diese Tasten der Fernbedienung In der Anzeige am Recorder sehen Sie Erläuterungen 2.1.2 Anschließen und Einstellen Änderungen und Ergänzungen … 8. Fernseh-Programm von Hand einstellen a) Funktion anwählen Z . , 8570 ¶ OK , b) Fernsehprogramm s ...

  • Grundig GV 460 VPT / NIC - page 13

    GV44…, GV45…, GV46… Allgemeiner T eil / General GRUNDIG Service-T echnik 1 - 13 2.2 Anschließen und Einstellen Fernseh-Programme einstellen Drücken Sie diese Tasten der Fernbedienung Auf dem Bildschirm Ihres Fernsehgerätes sehen Sie Erläuterungen Durch "Land" wählen legen Sie ein wei- teres Merkmal für den ATS euro plus- Suchl ...

  • Grundig GV 460 VPT / NIC - page 14

    Allgemeiner T eil / General GV44…, GV45…, GV46… 1 - 14 GRUNDIG Service-T echnik 2.2.1 Anschließen und Einstellen Änderungen und Ergänzungen . . . uu Drücken Sie diese Tasten der Fernbedienung Auf dem Bildschirm Ihres Fernsehgerätes sehen Sie Erläuterungen d) Neuen Programmplatz anwählen W oder Q , Die Daten des markierten Programmplat- ...

  • Grundig GV 460 VPT / NIC - page 15

    GV44…, GV45…, GV46… Allgemeiner T eil / General GRUNDIG Service-T echnik 1 - 15 2.2.1 Anschließen und Einstellen Änderungen und Ergänzungen … Drücken Sie diese Tasten der Fernbedienung Auf dem Bildschirm Ihres Fernsehgerätes sehen Sie Erläuterungen e) Videotext-Seitennummer bestätigen oder neu eingeben (dreistellig) 1 ... 0 OO f) Unt ...

  • Grundig GV 460 VPT / NIC - page 16

    Allgemeiner T eil / General GV44…, GV45…, GV46… 1 - 16 GRUNDIG Service-T echnik 2.2.1 Anschließen und Einstellen Änderungen und Ergänzungen … 4. Daten eines Programmplatzes löschen – wenn diese nicht benötigt werden a) »Sender-Tabelle« anwählen ø 4 3 Der gewählte Programmplatz, im Bei- spiel 1, ist blau unterlegt. b) Programmpla ...

  • Grundig GV 460 VPT / NIC - page 17

    GV44…, GV45…, GV46… Allgemeiner T eil / General GRUNDIG Service-T echnik 1 - 17 2.2.1 Anschließen und Einstellen Änderungen und Ergänzungen . . . Drücken Sie diese Tasten der Fernbedienung Auf dem Bildschirm Ihres Fernsehgerätes sehen Sie Erläuterungen 6. SECAM-Farbnorm aktivieren a) »Sender-Tabelle« anwählen ø 4 3 Diese Einstellung ...

  • Grundig GV 460 VPT / NIC - page 18

    Allgemeiner T eil / General GV44…, GV45…, GV46… 1 - 18 GRUNDIG Service-T echnik Drücken Sie diese Tasten der Fernbedienung In der Anzeige am Recorder sehen Sie Erläuterungen 2.2.1 Anschließen und Einstellen Änderungen und Ergänzungen … c) Fernseh-Programm speichern , O , d) Programmplatz wählen PROGRAM W oder Q , e) Programmplatz spei ...

  • Grundig GV 460 VPT / NIC - page 19

    GV44…, GV45…, GV46… Allgemeiner T eil / General GRUNDIG Service-T echnik 1 - 19 3. Wiedergabe Bild-/ T onqualität optimieren Automatisch (Auto T racking) Nach dem Einschieben der Cassette und dem Starten der Wiedergabe stimmt der Recorder automatisch auf beste Bild- qualität ab (Auto Tracking). Während der Abstimmung erscheint am Recorder ...

  • Grundig GV 460 VPT / NIC - page 20

    Allgemeiner T eil / General GV44…, GV45…, GV46… 1 - 20 GRUNDIG Service-T echnik 3. Wiedergabe Standbilder schrittweise fortschalten, vorwärts oder rückwärts* Während der Wiedergabe Taste K drücken (Wiedergabe- Pause). Durch Drehen der Jog-Drehscheibe können Sie sich die vor- herigen bzw. folgenden Standbilder einzeln ansehen (siehe Abbi ...

  • Grundig GV 460 VPT / NIC - page 21

    GV44…, GV45…, GV46… Allgemeiner T eil / General GRUNDIG Service-T echnik 1 - 21 5. Aufnahme sofort Die Aufnahme auf einen Blick Diese Funktionen können Sie mit den Tasten an der Fernbe- dienung oder am Videorecorder ausführen. Rechte Klappe am Recorder öffnen Cassette mit ausreichender Spieldauer in das Cassettenfach schieben, Löschsicher ...

  • Grundig GV 460 VPT / NIC - page 22

    Allgemeiner T eil / General GV44…, GV45…, GV46… 1 - 22 GRUNDIG Service-T echnik 5. Aufnahme sofort Stoppzeit eingeben Zum Eingeben der Stoppzeit haben Sie 2 Möglichkeiten: Minutengenaues Eingeben; Eingeben in 30-min.-Schritten. Minutengenaues Eingeben der Stoppzeit Gewünschte Stoppzeit mit den Ziffern-Tasten 1 ... 0 vier- stellig eingeben u ...

  • Grundig GV 460 VPT / NIC - page 23

    GV44…, GV45…, GV46… Allgemeiner T eil / General GRUNDIG Service-T echnik 1 - 23 6.2 Aufnahme programmieren von Geräten mit "T extprogramming" uu Schnellprogrammierung mit den Videotext- Seiten der Sendeanstalten, Vorbereiten Fernsehgerät einschalten. Am Fernsehgerät den Programmplatz für den Videorecorder wählen (dient als Kont ...

  • Grundig GV 460 VPT / NIC - page 24

    Allgemeiner T eil / General GV44…, GV45…, GV46… 1 - 24 GRUNDIG Service-T echnik Drücken Sie diese Tasten der Fernbedienung Auf dem Bildschirm Ihres Fernseh- gerätes sehen Sie Erläuterungen 6.2 Aufnahme programmieren uu 3. Sendung wählen W . . . W Taste W so oft drücken, bis der Cur- sor ? neben der Uhrzeit der gewünsch- ten Sendung steh ...

  • Grundig GV 460 VPT / NIC - page 25

    GV44…, GV45…, GV46… Allgemeiner T eil / General GRUNDIG Service-T echnik 1 - 25 Mögliche Meldungen in der Dialogzeile Wenn die »Restspielzeit« negativ (–) und rot markiert ist, dann wurde eine Cassette mit zu geringer Spieldauer einge- legt, oder die Summe aller TIMER-Aufnahmezeiten ist zu groß. Erscheint anstatt der »Restspielzeit« d ...

  • Grundig GV 460 VPT / NIC - page 26

    Allgemeiner T eil / General GV44…, GV45…, GV46… 1 - 26 GRUNDIG Service-T echnik 6.3 Aufnahme programmieren Drücken Sie diese Tasten am Recorder In der Anzeige am Recorder sehen Sie Erläuterungen 3. Datum ... oder a) aktuelles Datum bestätigen ¢ OK . 4. Startzeit eingeben Stunden (0 bis 23) W oder Q ¢ OK . Minuten (0 bis 59) W oder Q ¢ O ...

  • Grundig GV 460 VPT / NIC - page 27

    GV44…, GV45…, GV46… Allgemeiner T eil / General GRUNDIG Service-T echnik 1 - 27 6.3 Aufnahme programmieren Nach dem Programmieren ... ... erscheint kurzzeitig in der Anzeige des Recorders die restli- che Spielzeit des Bandes. Danach erscheint der Programmplatz mit Sender-Kurzbe- zeichnung, die Einschaltzeit und die Ausschaltzeit des zeitlich ...

  • Grundig GV 460 VPT / NIC - page 28

    Allgemeiner T eil / General GV44…, GV45…, GV46… 1 - 28 GRUNDIG Service-T echnik 7. Sonderfunktionen Den Recorder auf Aufnahme-Pause schalten, dazu beide Tasten M; drücken. Anzeige am Recorder: » ● ll «. Jog-Drehscheibe (Innendrehscheibe) nach links oder rechts drehen, bis » CV « in der Anzeige des Recorders erscheint. Im Wiedergabebetr ...

  • Grundig GV 460 VPT / NIC - page 29

    GV44…, GV45…, GV46… Allgemeiner T eil / General GRUNDIG Service-T echnik 1 - 29 7. Sonderfunktionen Nachträgliches Einfügen neuer Aufnahmen Programmquelle wählen Drehen Sie die Jog-Drehscheibe nach links oder rechts, bis die gewünschte Anzeige am Recorder erscheint : I ... 6O = Programmplätze der Fernsehsender; AI / A2 = Bild-/Tonquelle ...

  • Grundig GV 460 VPT / NIC - page 30

    Allgemeiner T eil / General GV44…, GV45…, GV46… 1 - 30 GRUNDIG Service-T echnik 7. Sonderfunktionen Der Recorder als HiFi-T onbandgerät T on-Aufnahme-Pause Taste K drücken. T on-Aufnahme fortsetzen Taste K drücken. T on-Aufnahme beenden Taste ` drücken. HiFi-T onwiedergabe Wiedergabe starten, dazu Taste J drücken. T onspur wählen Bei de ...

  • Grundig GV 460 VPT / NIC - page 31

    GV44…, GV45…, GV46… Allgemeiner T eil / General GRUNDIG Service-T echnik 1 - 31 7. Sonderfunktionen Nachvertonen (Dubbing) Vorbereiten Bespielte Cassette in den Recorder schieben. Programmquelle wählen Die Jog-Drehscheibe nach links oder rechts drehen, bis die gewünschte Anzeige am Recorder erscheint: HI = Tonquelle an den AUDIO-Buchsen an ...

  • Grundig GV 460 VPT / NIC - page 32

    Überspielen mit ... . . . D 2-MAC-Decoder, . . . Fernsehgeräte mit dem Format 16:9. Beim Betrieb mit einem dieser Geräte ist es notwendig, die Eingangs-Buchsen des Recorders anzupassen. Taste ø drücken. Mit Ziffern-Taste 4 aus der Tafel »Info« die Ziele »Sonder- funktionen« anwählen. Die Tafel »Sonderfunktionen« erscheint. Mit Ziffern-T ...

  • Grundig GV 460 VPT / NIC - page 33

    GV44…, GV45…, GV46… Allgemeiner T eil / General GRUNDIG Service-T echnik 1 - 33 8 MIC L R AUDIO IN VIDEO IN / CV U MAN DUBBING INSERT RECORD LEVEL S - VHS U OK CL SET CHECK EW/ED ON/OFF TIMER 8 LR AUDIO IN VIDEO IN / CV RECORD LEVEL OK CL SET CHECK EW/ED ON/OFF TIMER INSERT MAN DECODER A2 L H L H x x EURO-A V A1 L R AUDIO L R 19 21 28 29 30 3 ...

  • Grundig GV 460 VPT / NIC - page 34

    Allgemeiner T eil / General GV44…, GV45…, GV46… 1 - 34 GRUNDIG Service-T echnik 1 ... 0 –––––––– Numbered buttons for different entries. u –––––––––––– Selects the picture/sound signal of a satellite receiver connected to the Ï EURO-AV ¾ socket for recording or record programming. ¢ SET ––––? ...

  • Grundig GV 460 VPT / NIC - page 35

    GV44…, GV45…, GV46… Allgemeiner T eil / General GRUNDIG Service-T echnik 1 - 35 EURO-AV DECODER A2 L H L H x x EURO-AV A1 L R AUDIO L R P A Y-TV Connecting the Recorder Connecting the recorder to the aerial Remove the plug of the cable from the aerial socket of your TV set and insert it into the aerial socket – II – of the recorder. Conne ...

  • Grundig GV 460 VPT / NIC - page 36

    Allgemeiner T eil / General GV44…, GV45…, GV46… 1 - 36 GRUNDIG Service-T echnik 2. Connecting and Setting Up Improving the picture quality If wavy lines are visible on the TV screen, the channel tuned to is already occupied by a TV station. In this case, proceed as follows: Press the “ 8 button on the recorder. On the TV set, search for a c ...

  • Grundig GV 460 VPT / NIC - page 37

    GV44…, GV45…, GV46… Allgemeiner T eil / General GRUNDIG Service-T echnik 1 - 37 2.1 Connecting and Setting Up T uning to TV Stations Press these buttons on the remote control Explanations You will see this in the display of your recorder 4. Starting the ATS tuning function “ A TS , The ATS tuning function starts and the scrolling symbol » ...

  • Grundig GV 460 VPT / NIC - page 38

    Allgemeiner T eil / General GV44…, GV45…, GV46… 1 - 38 GRUNDIG Service-T echnik 2.1.1 Connecting and Setting Up Changing and Making Additions . . . Press these buttons on the remote control You will see this in the display of the recorder Explanations 2. Entering the station identification abbreviation (max. 5 places) a) Select a programme po ...

  • Grundig GV 460 VPT / NIC - page 39

    GV44…, GV45…, GV46… Allgemeiner T eil / General GRUNDIG Service-T echnik 1 - 39 Press these buttons on the remote control Explanations 2.1.1 Connecting and Setting Up Changing and Making Additions . . . You will see this in the display of the recorder 5. Activating the programme position for an external decoder a) Select the programme positio ...

  • Grundig GV 460 VPT / NIC - page 40

    Allgemeiner T eil / General GV44…, GV45…, GV46… 1 - 40 GRUNDIG Service-T echnik Press these buttons on the remote control You will see this in the display of the recorder Explanations 2.1.2 Connecting and Setting Up Changing and Making Additions … c) Store the TV station “ STORE , d) Enter the necessary VIDEO Plus+ code number as a three ...

  • Grundig GV 460 VPT / NIC - page 41

    GV44…, GV45…, GV46… Allgemeiner T eil / General GRUNDIG Service-T echnik 1 - 41 2.2 Connecting and Setting Up T uning to TV stations Press these buttons on the remote control You will see this on your TV screen Explanations When you select the "country," the ATS euro plus tuning function searches for and stores those stations that b ...

  • Grundig GV 460 VPT / NIC - page 42

    Allgemeiner T eil / General GV44…, GV45…, GV46… 1 - 42 GRUNDIG Service-T echnik 2.2.1 Setting up and Connecting Changing and Making Additions . . . uu Press these buttons on the remote control You will see this on your TV screen Explanations d) Select a new programme position W or Q , The data of the highlighted programme position is shifted ...

  • Grundig GV 460 VPT / NIC - page 43

    GV44…, GV45…, GV46… Allgemeiner T eil / General GRUNDIG Service-T echnik 1 - 43 2.2.1 Setting Up and Connecting Changing and Making Additions … Press these buttons on the remote control You will see this on your TV screen Explanations e) Teletext page number confirm or new entry (three digits) 1 ... 0 OO f) Subtitle page number confirm or n ...

  • Grundig GV 460 VPT / NIC - page 44

    Allgemeiner T eil / General GV44…, GV45…, GV46… 1 - 44 GRUNDIG Service-T echnik 2.2.1 Connecting and Setting Up Changing and Making Additions … 4. Deleting the data of a programme position – if it is not needed a) Select the "TV Station Table" ø 4 3 The programme position you selected, programme position 1 in the example, is hi ...

  • Grundig GV 460 VPT / NIC - page 45

    GV44…, GV45…, GV46… Allgemeiner T eil / General GRUNDIG Service-T echnik 1 - 45 2.2.1 Connecting and Setting Up Changing and Making Additions . . . Press these buttons on the remote control You will see this on your TV screen Explanations 6. Activating the SECAM colour standard a) Select the "TV Station Table" ø 4 3 This adjustment ...

  • Grundig GV 460 VPT / NIC - page 46

    Allgemeiner T eil / General GV44…, GV45…, GV46… 1 - 46 GRUNDIG Service-T echnik Press these buttons on the remote control You will see this in the display of the recorder Explanations 2.2.1 Connecting and Setting Up Changing and Making Additions … c) Store the TV station , O , d) Select a programme position PROGRAM W or Q , e) Store the pro ...

  • Grundig GV 460 VPT / NIC - page 47

    GV44…, GV45…, GV46… Allgemeiner T eil / General GRUNDIG Service-T echnik 1 - 47 3. Playback Optimizing the Picture/Sound Quality Automatic T racking After having inserted a cassette and started playback, the recorder adjusts automatically for the best possible picture quality (Auto Tracking). During this adjustment, the indication: " AUT ...

  • Grundig GV 460 VPT / NIC - page 48

    Allgemeiner T eil / General GV44…, GV45…, GV46… 1 - 48 GRUNDIG Service-T echnik 3. Playback Freeze-Frame Stepping, Forwards or Reverse* Press the K button during playback (playback pause). By turning the jog knob you can view the previous or the fol- lowing individual freeze-frames step by step (see illustration). » JOG II « appears in the ...

  • Grundig GV 460 VPT / NIC - page 49

    GV44…, GV45…, GV46… Allgemeiner T eil / General GRUNDIG Service-T echnik 1 - 49 5. Immediate Recording Recording at a Glance You can carry out these functions using the buttons on the remote control or on the recorder. Open the right flap on the recorder. Insert a cassette with sufficient playing time and which is not protected against record ...

  • Grundig GV 460 VPT / NIC - page 50

    Allgemeiner T eil / General GV44…, GV45…, GV46… 1 - 50 GRUNDIG Service-T echnik 5. Immediate Recording Entering a Stop Time There are two methods of entering the stop time: Entering the stop time to the exact minute; Entering the stop time in 30-minute steps. Entering the stop time to the exact minute Enter the stop time as a four-digit numbe ...

  • Grundig GV 460 VPT / NIC - page 51

    GV44…, GV45…, GV46… Allgemeiner T eil / General GRUNDIG Service-T echnik 1 - 51 6.1 Record Programming for sets with ShowView Press these buttons on the remote control You will see this on the display of the recorder Explanations 4. Confirm entry ¶ OK , The recorder transfers the VIDEO Plus+ code number into the actual recording data. If you ...

  • Grundig GV 460 VPT / NIC - page 52

    Allgemeiner T eil / General GV44…, GV45…, GV46… 1 - 52 GRUNDIG Service-T echnik Press these buttons on the remote control You will see this on your TV screen Explanations 6.2 Record Programming uu 3. Selecting a broadcast W . . . W Press the W button until the cursor ? is positioned next to the start time of the desired broadcast. 4. Confirmi ...

  • Grundig GV 460 VPT / NIC - page 53

    GV44…, GV45…, GV46… Allgemeiner T eil / General GRUNDIG Service-T echnik 1 - 53 Possible messages in the dialogue line If the "Remaining time" is negative (–) and highlighted in red, then a cassette of insufficient playing time has been loaded, or the sum of all TIMER recordings is too large. If the message "Record period&quo ...

  • Grundig GV 460 VPT / NIC - page 54

    Allgemeiner T eil / General GV44…, GV45…, GV46… 1 - 54 GRUNDIG Service-T echnik 6.3 Record Programming Press these buttons on the recorder You will see this in the display of the recorder Explanations 3. Date ... or a) confirm today´s date ¢ OK . 4. Entering a start time Hours (0 to 23) W or Q ¢ OK . Minutes (0 to 59) W or Q ¢ OK . Start ...

  • Grundig GV 460 VPT / NIC - page 55

    GV44…, GV45…, GV46… Allgemeiner T eil / General GRUNDIG Service-T echnik 1 - 55 6.3 Record Programming After programming ... ... the remaining playing time is briefly shown in the display of the recorder. Then the display indicates the programme position with the station identification abbreviation as well as the start time and the stop time ...

  • Grundig GV 460 VPT / NIC - page 56

    Allgemeiner T eil / General GV44…, GV45…, GV46… 1 - 56 GRUNDIG Service-T echnik 7. Special Functions Switch the recorder to recording-pause by pressing both of the M; buttons. " ● ll " will appear in the display of the recorder. Turn the jog-knob (inner knob) to the left or right until " CV " appears in the display of th ...

  • Grundig GV 460 VPT / NIC - page 57

    GV44…, GV45…, GV46… Allgemeiner T eil / General GRUNDIG Service-T echnik 1 - 57 7. Special Functions Inserting New Recordings at a Later Date Selecting the programme source Turn the jog-knob to the left or right until the desired indica- tion apears in the display of the recorder: I ... 6O = programme position of TV stations; AI / A2 = pictur ...

  • Grundig GV 460 VPT / NIC - page 58

    Allgemeiner T eil / General GV44…, GV45…, GV46… 1 - 58 GRUNDIG Service-T echnik 7. Special Functions The Recorder as a HiFi T ape Recorder Audio r ecording pause Press the K button. Continuin g recording Press the K button. T erminating the audio recording Press the ` button. HiFi playback Press the J button to start playback. Selecting the a ...

  • Grundig GV 460 VPT / NIC - page 59

    GV44…, GV45…, GV46… Allgemeiner T eil / General GRUNDIG Service-T echnik 1 - 59 7. Special Functions Adding Sound at a Later Date (Dubbing) Preparation Insert a recorded cassette into the recorder. Selecting the programme source Turn the jog-knob right or left until the desired indication appears in the display of the recorder: HI = Connect t ...

  • Grundig GV 460 VPT / NIC - page 60

    Allgemeiner T eil / General GV44…, GV45…, GV46… 1 - 60 GRUNDIG Service-T echnik 7. Special Functions The Continuous Mode Functions of the Recorder Your recorder can: Continuously record from different signal sources, e.g. from TV broadcasts or from units that are connected to a cor- responding socket. Play back continuously. Preparation for t ...

  • Grundig GV 460 VPT / NIC - page 61

    GV44…, GV45…, GV46… Servicehinweise / Service Instructions GRUNDIG Service-Technik 1 - 61 Service Instructions 1. Removing the Cabinet Parts 1.1 Cabinet Upper Part – Undo 4 screws A (Fig. 1). – Lift off the cabinet upper part. 1.2 Bottom Panel – Remove 4 inserts B (Fig. 2) and undo the screw lying below each insert. – Additionally, un ...

  • Grundig GV 460 VPT / NIC - page 62

    Servicehinweise / Service Instructions GV44…, GV45…, GV46… 1 - 62 GRUNDIG Service-Technik 2. Ausbauhinweise 2.1 Bedieneinheit I ausbauen – Rastnasen G lösen (Fig. 5). – Bedieneinheit I abnehmen. – Gegebenenfalls Steckverbindung lösen. 2.1.1 Bedieneinheit II ausbauen – Rastnase H lösen (Fig. 5). – Bedieneinheit II abnehmen. – Ge ...

  • Grundig GV 460 VPT / NIC - page 63

    GV44…, GV45…, GV46… Servicehinweise / Service Instructions GRUNDIG Service-Technik 1 - 63 2.4 Removing the Drive Mechanism – Release the locks R (Fig. 8) and S (Fig. 9) of the cassette compartment and move it inwards to gain access to the screws U (Fig. 10). – Undo the screws U (Fig. 10) and unplug the connectors to the electronics if nec ...

  • Grundig GV 460 VPT / NIC - page 64

    Servicehinweise / Service Instructions GV44…, GV45…, GV46… 1 - 64 GRUNDIG Service-Technik 3. Wichtige Masseverbindungen! Beim Zusammenbau des Gerätes ist darauf zu achten, daß die Masseverbindungen zwischen Gehäuseboden und Chassisplatte, Gehäuseboden und Netzteilbaustein, sowie Gehäuseboden und Ge- häuseoberteil gewährleistet sind. 4. ...

  • Grundig GV 460 VPT / NIC - page 65

    GV44…, GV45…, GV46… Servicetestprogramm und Sonderfunktionen / Service Test Programme and Special Functions GRUNDIG Service-Technik 1 - 65 Servicetestpr ogramm und Sonderfunktionen 1. Servicetestprogramm Aufruf, Ebenenkontrolle und Beenden des Servicetestprogrammes Der Aufruf des Servicetestprogrammes ist bei allen Laufwerksfunktionen möglic ...

  • Grundig GV 460 VPT / NIC - page 66

    Servicetestprogramm und Sonderfunktionen / Service Test Programme and Special Functions GV44…, GV45…, GV46… 1 - 66 GRUNDIG Service-Technik Überwachung der Laufwerksfunktionen Wenn eines der nachfolgend beschriebenen Signale nicht vorliegt, versucht das Gerät, den Cassettenschacht in die Stellung "EJECT" zu bringen. • Ein- und Au ...

  • Grundig GV 460 VPT / NIC - page 67

    GV44…, GV45…, GV46… Servicetestprogramm und Sonderfunktionen / Service Test Programme and Special Functions GRUNDIG Service-Technik 1 - 67 1.3 Ebene 3 des Servicetestprogrammes Betriebstundenzähler Der Betriebsstundenzähler gibt an, wieviele Stunden die Kopfscheibe rotierte. 1.3 Level 3 of the Service Test Programme Operating Hours Meter Th ...

  • Grundig GV 460 VPT / NIC - page 68

    Servicetestprogramm und Sonderfunktionen / Service Test Programme and Special Functions GV44…, GV45…, GV46… 1 - 68 GRUNDIG Service-Technik Code Function Number 8501 Continuous soak test "Playback" up to the tape counter reading when the soak test was started (Start the test with button J ) 8501 Continuous soak test (select a program ...

  • Grundig GV 460 VPT / NIC - page 69

    GRUNDIG Service-Technik 2 - 1 GV44…, GV45…, GV46… Beschreibungen / Descriptions Beschr eibungen 1. Netzteil (PS) 1.1 Primärseite ln dem freischwingenden Sperrwandlernetzteil übernimmt der IC7005 die Ansteuerung und Überwachung des MOS-Leistungstransistors T7035 sowie alle notwendigen Regelungs- und Überwachungsfunk- tionen. Über Pin 1 er ...

  • Grundig GV 460 VPT / NIC - page 70

    2 - 2 GRUNDIG Service-Technik Beschreibungen / Descriptions GV44…, GV45…, GV46… 2. Family Board 2.1 Family Board – Sequence Control / Deck Electronic (DE) Function Overview The microcomputer µ PD78134, IC7050, forms the heart of the se- quence control. It has complete responsibility of the head and tape servo control, bus and tape deck dri ...

  • Grundig GV 460 VPT / NIC - page 71

    GRUNDIG Service-Technik 2 - 3 GV44…, GV45…, GV46… Beschreibungen / Descriptions 2.1.1 Reset / Netzteilansteuerung Nach dem Anstecken des Recorders ans Netz erhält der Ablaufrech- ner an IC7050-(29) den Resetimpuls R ESET , der vom Netzteil erzeugt wird. Nach der Initialisierung gibt der Ablaufrechner über den seriellen Bus zur Port-Erweiter ...

  • Grundig GV 460 VPT / NIC - page 72

    2 - 4 GRUNDIG Service-Technik Beschreibungen / Descriptions GV44…, GV45…, GV46… 2.1.6 Bandservoregelung Der Capstanmotor ist ein Dreiphasenmotor, der mit Hallgeneratoren bestückt ist. Diese erzeugen Signale, die dem Capstanmotor-Treiber- IC (CXA-8005AS) auf der Capstanmotor-Einheit über die Pins 1…6 zugeführt werden. Abhängig von diesen ...

  • Grundig GV 460 VPT / NIC - page 73

    GRUNDIG Service-Technik 2 - 5 GV44…, GV45…, GV46… Beschreibungen / Descriptions 2.2 Chassisplatte – Teletext "DOS" (OS) Funktionsübersicht Der DOS-Schaltungsteil enthält einen Testbild/Datengenerator und die Videotextverarbeitung. Dazu benötigt er folgende Baugruppen (ICs): – IC7150, IVT (Integrated Video-Input-Processor and ...

  • Grundig GV 460 VPT / NIC - page 74

    2 - 6 GRUNDIG Service-Technik Beschreibungen / Descriptions GV44…, GV45…, GV46… – Zeichengenerator Man unterscheidet 256 Zeichen. Jedem dieser Zeichen ist ein 8Bit- Datenwort zugeordnet. 32 davon sind Steuerzeichen, der Rest graphisch bzw. alphanumerisch in Form einer Rasterpunktmatrix aus 12 horizontalen und 10 vertikalen Punkten zusammeng ...

  • Grundig GV 460 VPT / NIC - page 75

    GRUNDIG Service-Technik 2 - 7 GV44…, GV45…, GV46… Beschreibungen / Descriptions Mono-Ton Bei Monosendungen ist nur an IC7790-(10) ein Signal vorhanden. Die Auswerteschaltung im Decoder IC7780 erkennt den MONO-Status und teilt dies über den I 2 C-Bus (Pins 1 / 20) dem Ablaufrechner IC7050 mit. Von ihm werden über den I 2 C-Bus die Ausgangswa ...

  • Grundig GV 460 VPT / NIC - page 76

    2 - 8 GRUNDIG Service-Technik Beschreibungen / Descriptions GV44…, GV45…, GV46… R3820, C2617 und R3827. Zwischen IC7510-(43) und IC7510-(38) stellt man sowohl den Schwarzwert (R3752) als auch den Weißwert (R3755) des Luminanz-Signals ein und führt es im IC7510 dem FM- Modulator zu. Das frequenzmodulierte Signal verläßt an Pin 36 den IC751 ...

  • Grundig GV 460 VPT / NIC - page 77

    GRUNDIG Service-Technik 2 - 9 GV44…, GV45…, GV46… Beschreibungen / Descriptions 2.4.2 Chassisplatte – Chroma Funktionsübersicht Bei Aufnahme wird das 4,43MHz-F-Signal mit Hilfe einer Mischfre- quenz (5,06MHz) auf 627kHz umgesetzt. Bei Wiedergabe wird aus dem 627kHz-F-Signal mit Hilfe der Mischfre- quenz (5,06MHz) das ursprüngliche 4,43MHz ...

  • Grundig GV 460 VPT / NIC - page 78

    2 - 10 GRUNDIG Service-Technik Beschreibungen / Descriptions GV44…, GV45…, GV46… Farbkiller. In der nachfolgenden "Y-C-MIX-Stufe" wird es zu dem intern zugeführten Y-Signal addiert und anschließend in der FBC-Stufe (feedback clamp) auf Synchronboden geklemmt. Trägeraufbereitung (PAL/NTSC) – Aufnahme (PAL) Zur Trägeraufbereitun ...

  • Grundig GV 460 VPT / NIC - page 79

    GRUNDIG Service-Technik 2 - 11 GV44…, GV45…, GV46… Beschreibungen / Descriptions Beim Aufsprechen der beiden Trägerfrequenzen auf das Band ist die HF-Amplitude des 1,8MHz-Trägers um ca. 10dB größer, da dieser Träger vom nachfolgenden Videokopf stärker angelöscht wird. Somit ist gewährleistet, daß bei Wiedergabe die beiden HF-Träger ...

  • Grundig GV 460 VPT / NIC - page 80

    2 - 12 GRUNDIG Service-Technik Beschreibungen / Descriptions GV44…, GV45…, GV46… 2.6.2 Löschoszillatoren Der Oszillator für den Hauptlöschkopf besteht aus dem Transistor T7207 und dem Resonanzkreis F1052 / C2205. Die Ansteuerung des Oszillators erfolgt über den Schaltpegel U WR-AL -3 vom Schie- beregister IC7259-(4) und die folgenden Tran ...

  • Grundig GV 460 VPT / NIC - page 81

    GRUNDIG Service-Technik 2 - 13 GV44…, GV45…, GV46… Beschreibungen / Descriptions Benutzung des Fernsehgerätes leitet man die codierten Bild-und Audiosignale von diesem über die EURO-AV1-Buchse und die Buch- se AV2 zum PAY-TV-Decoder. In diesem werden die Signale deco- diert und über die Buchse AV2 und EURO-AV1-Buchse dem Fernseh- gerät wi ...

  • Grundig GV 460 VPT / NIC - page 82

    2 - 14 GRUNDIG Service-Technik Beschreibungen / Descriptions GV44…, GV45…, GV46… 4. Bedieneinheiten (DC) Funktionsübersicht Die Bedieneinheiten bestehen aus folgenden Funktionsgruppen: Bedieneinheit I: – 4-Bit-Single-Chip Microcomputer – Vakuum-Fluoreszenz-Display (VFD) – Bedienfeld (Tastatur-Matrix) – IR-Empfänger und Fernbedienaus ...

  • Grundig GV 460 VPT / NIC - page 83

    GRUNDIG Service-Technik 2 - 15 GV44…, GV45…, GV46… Beschreibungen / Descriptions 4.5 Impulsaufbereitung für JOG-Befehle Das JOG-Shuttle stellt einen frei drehbaren Impulsschalter mit insge- samt 10 Raststellungen pro Umdrehung dar. Das JOG-Shuttle enthält insgesamt 4 Impulssysteme, wobei je zwei dem Shuttle (Außenring) und dem JOG (Innenri ...

  • Grundig GV 460 VPT / NIC - page 84

    2 - 16 GRUNDIG Service-Technik Beschreibungen / Descriptions GV44…, GV45…, GV46… Notizen / Notes ...

  • Grundig GV 460 VPT / NIC - page 85

    GV44…, GV45…, GV46… Abgleichvorschriften / Adjustment Procedures GRUNDIG Service-Technik 3 - 1 Mit C2060 die Periode des Taktes auf 1s ± 4 µ s einstellen. 10k Ω -Widerstand entfernen. Beim Anschließen des Gerätes an das Netz gleichzeitig am Gerät die Tasten > und V drücken. Dabei werden auf den ersten 5 Programmplätzen für den Fr ...

  • Grundig GV 460 VPT / NIC - page 86

    Abgleichvorschriften / Adjustment Procedures GV44…, GV45…, GV46… 3 - 2 GRUNDIG Service-Technik 2.2 Chassisplatte – DOS (OS) Meßgeräte: Zweikanal-Oszilloskop, Tastkopf (TK) 1:1. Servicearbeiten nach Austausch der Chassisplatte: – Abgleich Vorbereitung Abgleichvorgang 1. H/2-Sync- Einstellung, F1040 (erforderlich nach Wechsel von F1040 od ...

  • Grundig GV 460 VPT / NIC - page 87

    GV44…, GV45…, GV46… Abgleichvorschriften / Adjustment Procedures GRUNDIG Service-Technik 3 - 3 2.4 Chassisplatte – Video (VS) Meßgeräte: Oszilloskop mit Tastkopf 10:1, Frequenzzähler, stabilisiertes Netzgerät, Farbgenerator, Testcassette. Servicearbeiten nach Austausch der Chassisplatte: Abgleich Nr. 3, 5 Abgleich Vorbereitung Abgleichv ...

  • Grundig GV 460 VPT / NIC - page 88

    Abgleichvorschriften / Adjustment Procedures GV44…, GV45…, GV46… 3 - 4 GRUNDIG Service-Technik 2.6 Chassisplatte – FM-Ton (AF) Meßgeräte: Oszilloskop, Tastkopf 10:1, Frequenzzähler, Tongenerator, NF-Millivoltmeter, Testcassette (HiFi). Servicearbeiten nach Austausch … … der Chassisplatte, der Bandtrommel / Kopfscheibe: Abgleich Nr. 2 ...

  • Grundig GV 460 VPT / NIC - page 89

    GV44…, GV45…, GV46… Abgleichvorschriften / Adjustment Procedures GRUNDIG Service-Technik 3 - 5 GB Adjustment Pr ocedures 1. Power Supply (PS) Test Equipment: Digital Voltmeter. Service work after replacing the Power Supply: – Adjustment Preparation Adjustment Procedure +12V D Adjust voltage to 12V ± 0.1V with R3090. Digital voltmeter: .... ...

  • Grundig GV 460 VPT / NIC - page 90

    Abgleichvorschriften / Adjustment Procedures GV44…, GV45…, GV46… 3 - 6 GRUNDIG Service-Technik 2.2 Family Board – DOS (OS) Test Equipment: Two-channel Oscilloscope, 1:1 Test Probe (TK). Service work after replacing the Family Board: – Adjustment Preparation Adjustment Procedure 1. H/2 Sync Adjustment, F1040 (necessary after replacing F104 ...

  • Grundig GV 460 VPT / NIC - page 91

    GV44…, GV45…, GV46… Abgleichvorschriften / Adjustment Procedures GRUNDIG Service-Technik 3 - 7 2.4 Family Board – Video (VS) Test Equipment: Oscilloscope, 10:1 Test Probe, Frequency Counter, Stabilized Power Supply, Colour Generator, Test Cassette. Service work after replacing the Family Board: Adjustment no. 3, 5 Adjustment Preparation Adj ...

  • Grundig GV 460 VPT / NIC - page 92

    Abgleichvorschriften / Adjustment Procedures GV44…, GV45…, GV46… 3 - 8 GRUNDIG Service-Technik Set frequency with R3402 (CFL) to 1.4MHz ± 5kHz . Set frequency with R3435 (CFR) to 1.8MHz ± 5kHz . To cancel the service function: Press the "Standby" button or disconnect the recorder from the mains. Set output voltage with R3390 (PBL) ...

  • Grundig GV 460 VPT / NIC - page 93

    GV44…, GV45…, GV46… Platinenabbildungen und Schaltpläne / Layout of P.C.B. and Circuit Diagrams GRUNDIG Service-Technik 4 - 1 Platinenabbildungen und Schaltpläne / Layout of P .C.B. and Cir cuit Diagrams D Schaltplansymbole / GB Circuit diagram symbols / F Symboles schema I Simboli sullo schema / E Simbolos en los esquemas / NL Schema symbo ...

  • Grundig GV 460 VPT / NIC - page 94

    4 - 2 GRUNDIG Service-Technik Platinenabbildungen und Schaltpläne / Layout of P.C.B. and Circuit Diagrams GV44…, GV45…, GV46… U AV-II Auswertung einer externen Schaltspannung / Evaluation of an exter- nal switching voltage / Analyse d'une tensionde commutation exter- ne / Valutazione di una tens. di commutaz. esterna / Evaluación de un ...

  • Grundig GV 460 VPT / NIC - page 95

    GV44…, GV45…, GV46… Platinenabbildungen und Schaltpläne / Layout of P.C.B. and Circuit Diagrams GRUNDIG Service-Technik 4 - 3 627 kHz 627kHz-Signal (PAL) / 627kHz Signal (PAL) / Signal 627kHz (PAL) / Segnale a 627kHz (PAL) / Senal de 627kHz (PAL) / 627kHz signaal (PAL) 1.1 MHz 1,1MHz-Signal (SECAM) / 1.1MHz Signal (SECAM) / Signal 1,1MHz (SE ...

  • Grundig GV 460 VPT / NIC - page 96

    4 - 4 GRUNDIG Service-Technik Platinenabbildungen und Schaltpläne / Layout of P.C.B. and Circuit Diagrams GV44…, GV45…, GV46… Schaltplansymbole für Audiosignale-Statusbefehle Circuit diagram symbols for Audio signals / Status commands Symboles sur schema pour commandes de statut Audio Simboli di comando Audio Simbolos de las senales de Audi ...

  • Grundig GV 460 VPT / NIC - page 97

    GV44…, GV45…, GV46… Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams GV44…, GV45…, GV46… Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams GRUNDIG Service 4 - 5 GRUNDIG Service 4 - 5 SAT-SID SAT (Satellit)-Tonkennung / SAT (Satellite) sound identification / Identification son SAT / Iden ...

  • Grundig GV 460 VPT / NIC - page 98

    Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams GV44…, GV45…, GV46… Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams GV44…, GV45…, GV46… 4 - 6 GRUNDIG Service 4 - 6 GRUNDIG Service Verdrahtungsplan / Wiring Diagram AUDIO AUDIO AUDIO-R FBAS F-SECAM 1,1MHZ UNC.FM AUTO U SEC BK REC U SEC ...

  • Grundig GV 460 VPT / NIC - page 99

    GV44…, GV45…, GV46… Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams GV44…, GV45…, GV46… Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams GRUNDIG Service 4 - 7 GRUNDIG Service 4 - 8 MUTE U U CM U HWM U HWM R C-F F2 F1 AV2 U AV1 U RESET DATA DATA F1 F2 CLOCK XX CLOCK F1 HI-S F2 DATA SH1 ...

  • Grundig GV 460 VPT / NIC - page 100

    Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams GV44…, GV45…, GV46… Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams GV44…, GV45…, GV46… 4 - 8 GRUNDIG Service 4 - 8 GRUNDIG Service Blockschaltplan (Analog) / Block Circuit Diagram (Analog) ...

  • Grundig GV 460 VPT / NIC - page 101

    GRUNDIG Service 4 - 9 GV44…, GV45…, GV46… Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams ...

  • Grundig GV 460 VPT / NIC - page 102

    4 - 10 GRUNDIG Service Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams GV44…, GV45…, GV46… Blockschaltplan (Digital) / Block Circuit Diagram (Digital) M THREADING MOTOR F AMIL Y/CHASSIS BO ARD SEQUENCE CONTROL/DECK ELECTR ONICS DE REC/Pb ...

  • Grundig GV 460 VPT / NIC - page 103

    GRUNDIG Service 4 - 11 GV44…, GV45…, GV46… Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams KEYBO ARD UNIT KEYBO ARD UNIT DC SENSOR PCB CAPST AN MO TOR UNIT HEAD MOT OR DRIVER HEAD-DISC MOT OR PO WER SUPPL Y PS ...

  • Grundig GV 460 VPT / NIC - page 104

    4 - 12 GRUNDIG Service Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams GV44…, GV45…, GV46… Netzteil / Power Supply (PS) 15 8 7 4 2 12 13 17 18 1 3 5 6 9 11 5070 BYT52M 6100 BAV21 6027 BYT52M 6120 BYT52M 6105 BYT52M 6122 BYT52M 6040 VDE560-2 VDE560-2 VDE565-1 VDE560-2 VDE560-2 VDE565-1 -+ DF08S 6070 68N 2025 0,1U 208 ...

  • Grundig GV 460 VPT / NIC - page 105

    GV44…, GV45…, GV46… Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams GV44…, GV45…, GV46… Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams GRUNDIG Service 4 - 13 GRUNDIG Service 4 - 13 1N4001 6137 BYT52M 6115 1N4001 6139 1N4001 6138 BC548C 7145 0,22U 2109 0,22U 2190 2,2N 2108 0,1U 2085 ...

  • Grundig GV 460 VPT / NIC - page 106

    Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams GV44…, GV45…, GV46… Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams GV44…, GV45…, GV46… Netzteil / Power Supply (PS) VR6379/39 VR8389/39 VR838/05 31 12 498 5050. 31 12 498 5051. 5106 C B X X X X - - A B&OESS.4409 B&OESS.4405 B&a ...

  • Grundig GV 460 VPT / NIC - page 107

    GV44…, GV45…, GV46… Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams GV44…, GV45…, GV46… Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams 160-5001.6 9. + 2037 + 2038 + 2057 + 2240 + 2378 + + 2382 + 2394 + 2390 + 2431 + 2657 + 2520 + 2813 + 2818 + 2235 + 2840 + 2725 + 2245 + 2212 + 2203 ...

  • Grundig GV 460 VPT / NIC - page 108

    Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams GV44…, GV45…, GV46… Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams GV44…, GV45…, GV46… 160-5001.6 9. 3455 3380 3390 3300 3312 3385 3435 3402 3693 3755 3752 3918 3635 3858 3725 3707 3768 4140 3700 7705 7710 7850 7020 7095 7259 7607 6035 ...

  • Grundig GV 460 VPT / NIC - page 109

    GV44…, GV45…, GV46… Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams GV44…, GV45…, GV46… Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams GRUNDIG Service 4 - 17 GRUNDIG Service 4 - 17 160-0001.6 9. 3430 3017 3082 3048 3050 3042 3045 3043 3047 3083 3135 3133 3140 3142 3020 3021 3038 303 ...

  • Grundig GV 460 VPT / NIC - page 110

    Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams GV44…, GV45…, GV46… Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams GV44…, GV45…, GV46… EN-FB U MUTE U WR-V U LP U AV-1 U AV-2 U AV-2 U AV-1 U ATS U ATS U WR-AL U 4,7K Y 3011 10K 3018 330 Y 3006 1K Y 3009 47K 3014 47K 3015 47K X 3016 39 ...

  • Grundig GV 460 VPT / NIC - page 111

    GV44…, GV45…, GV46… Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams GV44…, GV45…, GV46… Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams GRUNDIG Service 4 - 19 GRUNDIG Service 4 - 19 EN-FB U 47 3172 47 3170 100K 3088 100K 3086 2% 20K 3147 2% 10K 3137 2% 10K 3136 2% 10K 3135 2% 10K 313 ...

  • Grundig GV 460 VPT / NIC - page 112

    Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams GV44…, GV45…, GV46… Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams GV44…, GV45…, GV46… 4 - 20 GRUNDIG Service 4 - 20 GRUNDIG Service 9 6 8 7 to Capstan motor RECP WTL FTA WTR SVHS INIT TAS TAE * TAE +5D TAS FG WTL FTA WTR LED INIT SVHS ...

  • Grundig GV 460 VPT / NIC - page 113

    GV44…, GV45…, GV46… Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams GV44…, GV45…, GV46… Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams GRUNDIG Service 4 - 21 GRUNDIG Service 4 - 21 Chassisplatte / Family Board – Teletext "DOS" (OS) FBAS SCL SDA FSC FBAS V-SYNC MIX.SYN R ...

  • Grundig GV 460 VPT / NIC - page 114

    Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams GV44…, GV45…, GV46… Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams GV44…, GV45…, GV46… 4 - 22 GRUNDIG Service 4 - 22 GRUNDIG Service BCR191 Y 7855 BCR191 X 7885 10N 2864 12N Y 2795 4,7P X 2758 1N Y 2743 1N Y 2742 10N Y 2740 10N Y 2745 ...

  • Grundig GV 460 VPT / NIC - page 115

    GV44…, GV45…, GV46… Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams GV44…, GV45…, GV46… Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams GRUNDIG Service 4 - 22 GRUNDIG Service 4 - 22 10N 2864 12N Y 2795 10N Y 2815 15P Y 2920 15P 2915 10N 2912 0,1U Y 2808 10N Y 2812 10N Y 2780 10N Y278 ...

  • Grundig GV 460 VPT / NIC - page 116

    Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams GV44…, GV45…, GV46… Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams GV44…, GV45…, GV46… 4 - 24 GRUNDIG Service 4 - 24 GRUNDIG Service Chassisplatte / Family Board – Video/Chroma (VS) U FMEP U FMEP RLS135 Y 6642 BAR42 X 6581 BAR42 X 65 ...

  • Grundig GV 460 VPT / NIC - page 117

    GV44…, GV45…, GV46… Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams GV44…, GV45…, GV46… Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams GRUNDIG Service 4 - 25 GRUNDIG Service 4 - 25 – GV460NIC GV450NIC GV450GB 15N 15N 15N 15N 22N 15N 15N SEC-W SEC-W SEC-W Y6642 Y3649 Y3647 Y3646 Y3 ...

  • Grundig GV 460 VPT / NIC - page 118

    Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams GV44…, GV45…, GV46… Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams GV44…, GV45…, GV46… 4 - 26 GRUNDIG Service 4 - 26 GRUNDIG Service Chassisplatte – FM-Ton / Family Board – FM-Sound (AF) 24K 3400 68K 3382 470 Y 3430 470 Y 3423 390 ...

  • Grundig GV 460 VPT / NIC - page 119

    GRUNDIG Service 4 - 27 GV44…, GV45…, GV46… Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams 220 3458 22 3457 5,6K 3442 2,2K 3440 1,5K 3450 3,3K 3445 3,3K 3449 1,5K 3447 270 3453 3,3N 2335 0,1U 2336 22N 2339 6 5 4 3 2 1 7 1507 1.8Mhz SFB4174 4 5 2 1075 1K 3455 SDA HI-S SCL HI-S 100UH 5302 BC848B 7336 1.4Mhz SFB4174 1 ...

  • Grundig GV 460 VPT / NIC - page 120

    4 - 28 GRUNDIG Service Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams GV44…, GV45…, GV46… + 47U/25V 2245 + 100U/10V 2250 + 47U/25V 2212 + 47U/25V 2218 + 4,7U/63V 2252 + 1U/100 V 2228 47N 2215 1,5N 2225 15N 2255 8,2N 2256 22N 2257 6,8N 2217 0,1U 2210 12N 2247 1N 2222 2,2N 2213 0,22U 2220 0,22U 2253 Y 820P 2223 5,6M ...

  • Grundig GV 460 VPT / NIC - page 121

    GRUNDIG Service 4 - 29 GV44…, GV45…, GV46… Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams Aufnahme Record Wiedergabe Playback 820P 820P Y2223 Y Y Y Y Y Y Y Y Y 68K 1K 3333 POS.NR. 1505 1504 3292 68K 3290 5,6N 2,5% 3314 5,6N 2,5% MICRO MICRO 39K 2235 – – – 2243 2232 A DUBBING DUBBING DUBBING DUBBING DUBBING DU ...

  • Grundig GV 460 VPT / NIC - page 122

    4 - 30 GRUNDIG Service Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams GV44…, GV45…, GV46… Chassisplatte / Family Board – IN/OUT (IO) AUDIO-L AUDIO-R AUDIO-L AUDIO-R FBAS R G B Y 75 3525 75 Y 3524 75 3520 75 3522 47K Y 3528 470 Y 3462 470 Y 3463 1K Y 3530 100K Y 3527 470 Y 3478 470 3472 100K 3470 390 Y 3475 Y 390 ...

  • Grundig GV 460 VPT / NIC - page 123

    GV44…, GV45…, GV46… Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams GV44…, GV45…, GV46… Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams GRUNDIG Service 4 - 31 GRUNDIG Service 4 - 31 FBAS FBAS AUDIO-R AUDIO AUDIO-R AUDIO-L SCL AUDIO SDA AUDIO AUDIO FBAS FBAS FBAS FBAS FBAS AUDIO-L AUD ...

  • Grundig GV 460 VPT / NIC - page 124

    Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams GV44…, GV45…, GV46… Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams GV44…, GV45…, GV46… NICAM - Decoder (NI) 4 - 32 GRUNDIG Service 4 - 32 GRUNDIG Service 1524 1529 1045 5002 5042 5040 5045 2003 2090 2040 2058 2073 2042 2088 2072 2067 1 ...

  • Grundig GV 460 VPT / NIC - page 125

    GV44…, GV45…, GV46… Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams GV44…, GV45…, GV46… Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams GRUNDIG Service 4 - 33 GRUNDIG Service 4 - 33 Tuner G1 G2 S D BF1012 CT2085 G1 G2 S D BF1012 CT2115 L2047 09241-129 18k CR2188 18k CR2182 1,2p CC204 ...

  • Grundig GV 460 VPT / NIC - page 126

    Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams GV44…, GV45…, GV46… Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams GV44…, GV45…, GV46… 4 - 34 GRUNDIG Service 4 - 34 GRUNDIG Service Kopfverstärker / Head Amplifier (HV/HA) ...

  • Grundig GV 460 VPT / NIC - page 127

    GRUNDIG Service 4 - 35 GV44…, GV45…, GV46… Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams 103 38990 6061. 1 LH A G 4 103 38990 6061. 1 LH A G 4 1 1 1 1 1 1 1 1 1 C B A C B A 2001 A 1 2002 A 1 2004 B 1 2007 B 1 2010 A 1 2011 A 1 2012 A 1 2013 A 1 2015 A 1 2017 A 1 2018 A 1 2020 A 1 2021 A 1 2022 A 1 2023 A 1 2024 A ...

  • Grundig GV 460 VPT / NIC - page 128

    4 - 36 GRUNDIG Service Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams GV44…, GV45…, GV46… Bedieneinheit I / Keyboard Control Unit I – GV44…, GV45… (DC) GP1U534X 2 1 CASE2 CASE1 3 CASE3 7010 AV1 U AV2 U 6,8UH 5015 + 47U/25V 2015 1N 2010 33N 2016 33N 2018 33N 2020 33N 2021 33N 2023 220P 2062 220P 2065 220P 2068 ...

  • Grundig GV 460 VPT / NIC - page 129

    GV44…, GV45…, GV46… Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams GV44…, GV45…, GV46… Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams GRUNDIG Service 4 - 37 GRUNDIG Service 4 - 37 RESET VDD VDD VDD VDD P40 P41 P42 P43 P50 P51 P52 P60 P61 P62 P63 P32 V_LOAD P70 P71 P72 P73 AVDD AVRE ...

  • Grundig GV 460 VPT / NIC - page 130

    Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams GV44…, GV45…, GV46… Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams GV44…, GV45…, GV46… 4 - 38 GRUNDIG Service 4 - 38 GRUNDIG Service Bedieneinheit I / Keyboard Control Unit I – GV44…, GV45… (DC) 160-0011.1 (2L) 3 1 1 1 160-0011.1 ...

  • Grundig GV 460 VPT / NIC - page 131

    GV44…, GV45…, GV46… Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams GV44…, GV45…, GV46… Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams GRUNDIG Service 4 - 39 GRUNDIG Service 4 - 39 3 160-00091 (2L) 1 1 3 160-00091 (2L) 1 1 12 6B 110 11 A 150 3 C 1070 10 A 1510 2 D 1516 2A 2015 3D 50 ...

  • Grundig GV 460 VPT / NIC - page 132

    Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams GV44…, GV45…, GV46… Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams GV44…, GV45…, GV46… Bedieneinheit I / Keyboard Control Unit I – GV46 (DC) GP1U534X 2 1 CASE2 CASE1 3 CASE3 7010 CST4,19MGWS1 1070 RESET CLOCK DATA DATA 6,8UH 5015 + 4 ...

  • Grundig GV 460 VPT / NIC - page 133

    GV44…, GV45…, GV46… Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams GV44…, GV45…, GV46… Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams GRUNDIG Service 4 - 41 GRUNDIG Service 4 - 41 Bedieneinheit II / Keyboard Control Unit II 12K 3040 75 3002 100 3022 100 3035 270 3030 22K 3033 22K 3 ...

  • Grundig GV 460 VPT / NIC - page 134

    Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams GV44…, GV45…, GV46… Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams GV44…, GV45…, GV46… Fernbedienung / Remote Control – RP30 1 61 55 56 6 14 22 30 38 46 54 47 48 39 40 31 53 52 51 50 49 41 42 43 44 45 37 36 35 34 33 25 26 27 28 29 32 ...

  • Grundig GV 460 VPT / NIC - page 135

    GV44…, GV45…, GV46… Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams GV44…, GV45…, GV46… Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams GRUNDIG Service 4 - 43 GRUNDIG Service 4 - 43 Fernbedienung / Remote Control – RP33 / RP35 33 3097 0 3044 1,2M 3012 820K 3010 150K 3042 150K 3038 ...

  • Grundig GV 460 VPT / NIC - page 136

    Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams GV44…, GV45…, GV46… Platinenabbildungen und Schaltpläne / Layout of PCBs and Circuit Diagrams GV44…, GV45…, GV46… A: DC, 50V/Div, 2us/Div 0V 7035 Drain 1 PB A: DC, 2 V/Div, 2us/Div 0V IC 7005 Pin 5 2 EE A: AC, 200mV/Div, 2us/Div 1V IC 7005 Pin 2 3 EE A: DC, 200m ...

  • Grundig GV 460 VPT / NIC - page 137

    GV44…, GV45…, GV46… Platinenabbildungen und Schaltpläne / Layout of P.C.B. and Circuit Diagrams GRUNDIG Service-Technik 4 - 45 A: AC, 500mV/Div, 500us/Div 3.7V IC 7320 Pin 9/10 60 REC A: AC, 500mV/Div, 500us/Div 3.7V IC 7320 Pin 5/6 61 PB A: AC, 500mV/Div, 500us/Div 3.7V IC 7320 Pin 5/6 61 REC A: AC, 500mV/Div, 500us/Div 6.5V IC 7320 Pin 47 ...

  • Grundig GV 460 VPT / NIC - page 138

    4 - 46 GRUNDIG Service-Technik Platinenabbildungen und Schaltpläne / Layout of P.C.B. and Circuit Diagrams GV44…, GV45…, GV46… ...

  • Grundig GV 460 VPT / NIC - page 139

    Laufwerk / Drive Mechanism GRUNDIG Service-Technik 5 - 1 Drive Mechanism The tape deck is fitted with three motors providing: – Precision drive for the headwheel – Direct drive for the capstan and the reels – Drive for the cassette compartment and tape threading/unthreading operations. Special features are: – Quick start – Short winding t ...

  • Grundig GV 460 VPT / NIC - page 140

    Laufwerk / Drive Mechanism 5 - 2 GRUNDIG Service-Technik 1.1 Removing the Drive Mechanism – Release the locks R (Fig. 1) and S (Fig. 2) of the cassette compartment and move it inwards to gain access to the screws U (Fig. 3). – Undo the screws U (Fig. 3) and unplug the connectors to the electronics if necessary. 1.2 Lowering the Cassette Compart ...

  • Grundig GV 460 VPT / NIC - page 141

    Laufwerk / Drive Mechanism GRUNDIG Service-Technik 5 - 3 1.3 Manual Ejection of the Cassette If the tape deck does not unthread and eject the cassette by pressing the Eject button this function can also be effected manually by turning the driving gear at the threading motor (Fig 4). To avoid slackening of the tape, turn the capstan motor (countercl ...

  • Grundig GV 460 VPT / NIC - page 142

    Laufwerk / Drive Mechanism 5 - 4 GRUNDIG Service-Technik Laufwerkunterseite Capstanriemen (Pos. 126), Riemenscheibe (Pos. 128G) und Sensor- platinen-Einheit demontiert. Bottom of Drive Mechanism Capstan belt (Pos. 126), pulley (Pos. 128G) and sensor print assembly removed. Zahnrad Gearwheel Pos. 44AB Cassetten-Ladehebel Cassette loader trigger Pos. ...

  • Grundig GV 460 VPT / NIC - page 143

    Laufwerk / Drive Mechanism GRUNDIG Service-Technik 5 - 5 Montageschraube B Mounting screw B Neigungswinkel-Einstellschraube Tilt setting screw Fig. 10 Fig. 11 A 2.3 Kopfscheibe Ausbau: – Kopfscheibe nur mit Nylonhandschuhen anfassen. – Referenzstift "C" (jeder Service-Kopfscheibe beigepackt) durch das Loch im Scannermotor einschieben ...

  • Grundig GV 460 VPT / NIC - page 144

    Laufwerk / Drive Mechanism 5 - 6 GRUNDIG Service-Technik 2.6 Capstan Motor (Pos. 127) – Set the tape deck to the "Eject" position. – Remove the driving belt (pos.126). – Release the sensor print covering the capstan motor and fold it up. – Remove the three capstan motor fixing screws and withdraw the capstan motor downward from th ...

  • Grundig GV 460 VPT / NIC - page 145

    Laufwerk / Drive Mechanism GRUNDIG Service-Technik 5 - 7 Fig. 15 Fig. 16 2.9 Threading Roller Unit, Left (Pos. 23) – Set the tape deck to the "Eject" position. – Unhook the tension arm spring (pos. 11) to avoid the tension arm spring being pre-loaded. – At the bottom side of the tape deck, partially unhinge the sensor print and remo ...

  • Grundig GV 460 VPT / NIC - page 146

    Laufwerk / Drive Mechanism 5 - 8 GRUNDIG Service-Technik 3. Adjustments 3.1 Tape Transport 3. Einstellungen 3.1 Bandlauf Fig. 18 Fig. 17 3.1.1 Threading Roller Unit Left / Right Before setting the left and the right threading roller units the X-distance (chapter 3.2) must be adjusted correctly otherwise the following adjustments may produce an adve ...

  • Grundig GV 460 VPT / NIC - page 147

    Laufwerk / Drive Mechanism GRUNDIG Service-Technik 5 - 9 3.1.2 A/C (combi) Head Tilt Angle Adjustment – Set the tape deck to a feature mode (e.g. picture search forward, 7- times normal play). – By means of the tilt angle adjusting screw (Fig. 19) move the tape until the lower edge just touches the tape guide "A1" (the lower edge of t ...

  • Grundig GV 460 VPT / NIC - page 148

    Laufwerk / Drive Mechanism 5 - 10 GRUNDIG Service-Technik 3.3 Brake Band Adjustment – Lower the cassette compartment (chapter 1.2). Turn the pulley of the threading motor (Fig. 4) in the "threading" direction until the cam wheel takes the position shown in Fig. 22. – Adjust the brake band by means of the tape tension adjusting tool (f ...

  • Grundig GV 460 VPT / NIC - page 149

    Explosionszeichnungen / Exploded Views GRUNDIG Service-Technik 6 - 1 1 Explosionszeichnungen und Ersatzteilliste Exploded V iews and Spare Par ts List 33 34 35 24B 23 26 21G 22G 140 20J 20aJ 13J 19J 18J 17J 16 25B 27B 28G 31F 32F 30F 29F 18J 15 14K 6K 9K 7K 6K 10K 3K 4K 11 12 2 5K 150 48A 44AB 43K 42K 45A 36 37 38 39 40G 41G 46A 47 2 1 13J 170 49G ...

  • Grundig GV 460 VPT / NIC - page 150

    Explosionszeichnungen / Exploded Views 6 - 2 GRUNDIG Service-Technik 2 114 119E 120E 108E 109E 117 I 116 I 115 121E 113B 118 112E 111B 110E 106 107E 105H 104H 101E 102H 127 128G 129 124E 123E 122E 125E 103H 126 Fett / Grease (Sach-Nr. / Part No. 75988-002.36) Isopropanol Fusselfreies Tuch / Fibrefree Tissue ...

  • Grundig GV 460 VPT / NIC - page 151

    GV44…, GV45…, GV46… Explosionszeichnungen / Exploded Views GRUNDIG Service-Technik 6 - 3 3 0008.000 0007.000 0006.002 0006.001 0005.000 0060.000 0050.000 0002.000 0040.000 0070.000 0001.000 0002.002 0006.003 0006.007 0006.006 0006.005 0006.004 0002.001 0006.000 0006.008 0004.000 0003.000 0080.000 0070.001 ...

  • Grundig GV 460 VPT / NIC - page 152

    Ersatzteilliste / Spare Parts List GV44…, GV45…, GV46… 6 - 4 GRUNDIG Service Ersatzteilliste Spare Parts List * POS. ABB. SACHNUMMER ANZ. NR. NR. POS. FIG. PART NUMBER QUA. NO. NO. BEZEICHNUNG DESCRIPTION D GB 1 1 / 93 GV 440 NIC SACH-NR. / PART NO.: 9.27044-0951 BESTELL-NR. / ORDER NO.: G.MD 4300 0001.000 27034-208.00 2 MASSEFEDER ERATH SPRI ...

  • Grundig GV 460 VPT / NIC - page 153

    GV44…, GV45…, GV46… Ersatzteilliste / Spare Parts List GRUNDIG Service 6 - 5 Ersatzteilliste Spare Parts List * POS. ABB. SACHNUMMER ANZ. NR. NR. POS. FIG. PART NUMBER QUA. NO. NO. BEZEICHNUNG DESCRIPTION D GB 1 1 / 93 GV 450 SACH-NR. / PART NO.: 9.27044-0751 BESTELL-NR. / ORDER NO.: G.MD 3200 0001.000 27034-208.00 2 MASSEFEDER EARTH SPRING 0 ...

  • Grundig GV 460 VPT / NIC - page 154

    Ersatzteilliste / Spare Parts List GV44…, GV45…, GV46… 6 - 6 GRUNDIG Service Ersatzteilliste Spare Parts List * POS. ABB. SACHNUMMER ANZ. NR. NR. POS. FIG. PART NUMBER QUA. NO. NO. BEZEICHNUNG DESCRIPTION D GB 1 1 / 93 GV 450 NIC SACH-NR. / PART NO.: 9.27044-0851 BESTELL-NR. / ORDER NO.: G.MD 3100 0001.000 27034-208.00 2 MASSEFEDER EARTH SPRI ...

  • Grundig GV 460 VPT / NIC - page 155

    GV44…, GV45…, GV46… Ersatzteilliste / Spare Parts List GRUNDIG Service 6 - 7 Ersatzteilliste Spare Parts List * POS. ABB. SACHNUMMER ANZ. NR. NR. POS. FIG. PART NUMBER QUA. NO. NO. BEZEICHNUNG DESCRIPTION D GB 1 1 / 93 GV 4592 VPT SACH-NR. / PART NO.: 9.27044-1251 BESTELL-NR. / ORDER NO.: G.MD 4100 0001.000 27034-208.00 2 MASSEFEDER ERATH SPR ...

  • Grundig GV 460 VPT / NIC - page 156

    Ersatzteilliste / Spare Parts List GV44…, GV45…, GV46… 6 - 8 GRUNDIG Service Ersatzteilliste Spare Parts List * POS. ABB. SACHNUMMER ANZ. NR. NR. POS. FIG. PART NUMBER QUA. NO. NO. BEZEICHNUNG DESCRIPTION D GB 1 1 / 93 GV 460 VPT SACH-NR. / PART NO.: 9.27044-0151 BESTELL-NR. / ORDER NO.: G.MD 3500 0001.000 27034-208.00 2 MASSEFEDER EARTH SPRI ...

  • Grundig GV 460 VPT / NIC - page 157

    GV44…, GV45…, GV46… Ersatzteilliste / Spare Parts List GRUNDIG Service 6 - 9 HSD-LW POS. ABB. SACHNUMMER ANZ. NR. NR. POS. FIG. PART NUMBER QUA. NO. NO. BEZEICHNUNG DESCRIPTION D GB 0046.000 1 75988-001.24 A STEUERSCHAFT CAM SHAFT 0047.000 1 75988-001.14 SCHAFT MIT RIEMENSCHEIBE PULLY SHAFT 0048.000 1 75988-001.24 A SCHNECKE WORM SHAFT 0049.0 ...

  • Grundig GV 460 VPT / NIC - page 158

    Ersatzteilliste / Spare Parts List GV44…, GV45…, GV46… 6 - 10 GRUNDIG Service BEZEICHNUNG DESCRIPTION SACHNUMMER PART NUMBER POS. NR. POS. NO. D GB U.S. & Canada Attention: Priere d`observer les prescriptions de sécurité VDE 0701 (concernant les reparations) et VDE 0860 / IEC 65 (concernant le type de produit)! Composants répondant aux ...

  • Grundig GV 460 VPT / NIC - page 159

    GV44…, GV45…, GV46… Ersatzteilliste / Spare Parts List GRUNDIG Service 6 - 11 BEZEICHNUNG DESCRIPTION SACHNUMMER PART NUMBER POS. NR. POS. NO. D GB BEZEICHNUNG DESCRIPTION SACHNUMMER PART NUMBER POS. NR. POS. NO. D GB C 2112 8452-967-095 ELKO AMMO5 220UF 16V C 2115 8452-016-173 ELKO AMMO5 56UF 35V C 2120 8672-167-262 KEFQ 0805 0,022UF 10% C 2 ...

  • Grundig GV 460 VPT / NIC - page 160

    Ersatzteilliste / Spare Parts List GV44…, GV45…, GV46… 6 - 12 GRUNDIG Service BEZEICHNUNG DESCRIPTION SACHNUMMER PART NUMBER POS. NR. POS. NO. D GB BEZEICHNUNG DESCRIPTION SACHNUMMER PART NUMBER POS. NR. POS. NO. D GB C 2831 8452-967-126 ELKO AMMO5 22UF 25V C 2833 8672-267-187 KEFQ 1206 0,1 UF 10% C 2835 8452-967-126 ELKO AMMO5 22UF 25V C 283 ...

  • Grundig GV 460 VPT / NIC - page 161

    GV44…, GV45…, GV46… Ersatzteilliste / Spare Parts List GRUNDIG Service 6 - 13 BEZEICHNUNG DESCRIPTION SACHNUMMER PART NUMBER POS. NR. POS. NO. D GB BEZEICHNUNG DESCRIPTION SACHNUMMER PART NUMBER POS. NR. POS. NO. D GB R 3263 8706-100-065 R-CHIP 0805 470 OHM 5% R 3265 8706-100-065 R-CHIP 0805 470 OHM 5% R 3272 8706-100-091 R-CHIP 0805 5,6 KOHM ...

  • Grundig GV 460 VPT / NIC - page 162

    Ersatzteilliste / Spare Parts List GV44…, GV45…, GV46… 6 - 14 GRUNDIG Service BEZEICHNUNG DESCRIPTION SACHNUMMER PART NUMBER POS. NR. POS. NO. D GB BEZEICHNUNG DESCRIPTION SACHNUMMER PART NUMBER POS. NR. POS. NO. D GB R 3927 8706-100-073 R-CHIP 0805 1 KOHM 5% R 3930 8706-100-073 R-CHIP 0805 1 KOHM 5% R 3932 8706-100-097 R-CHIP 0805 10 KOHM 5% ...

  • Grundig GV 460 VPT / NIC - page 163

    GV44…, GV45…, GV46… Ersatzteilliste / Spare Parts List GRUNDIG Service 6 - 15 POS. ABB. SACHNUMMER ANZ. NR. NR. POS. FIG. PART NUMBER QUA. NO. NO. BEZEICHNUNG DESCRIPTION D GB 27507-001.37 CHASSISPLATTE GV 450 NIC CHASSIS BOARD GV 450 NIC 1518.000 39604-123.01 DRAHTKLEMM-STECKVBDG. 3-POL WIRE CLAMP CONNECTOR 3-POL 1524.000 39604-127.01 DRAHTK ...

  • Grundig GV 460 VPT / NIC - page 164

    Ersatzteilliste / Spare Parts List GV44…, GV45…, GV46… 6 - 16 GRUNDIG Service POS. ABB. SACHNUMMER ANZ. NR. NR. POS. FIG. PART NUMBER QUA. NO. NO. BEZEICHNUNG DESCRIPTION Ersatzteilliste Spare Parts List * D GB BEZEICHNUNG DESCRIPTION SACHNUMMER PART NUMBER POS. NR. POS. NO. D GB BEZEICHNUNG DESCRIPTION SACHNUMMER PART NUMBER POS. NR. POS. NO ...

  • Grundig GV 460 VPT / NIC - page 165

    GV44…, GV45…, GV46… Ersatzteilliste / Spare Parts List GRUNDIG Service 6 - 17 BEZEICHNUNG DESCRIPTION SACHNUMMER PART NUMBER POS. NR. POS. NO. D GB U.S. & Canada Attention: Priere d`observer les prescriptions de sécurité VDE 0701 (concernant les reparations) et VDE 0860 / IEC 65 (concernant le type de produit)! Composants répondant aux ...

  • Grundig GV 460 VPT / NIC - page 166

    Ersatzteilliste / Spare Parts List GV44…, GV45…, GV46… 6 - 18 GRUNDIG Service POS. ABB. SACHNUMMER ANZ. NR. NR. POS. FIG. PART NUMBER QUA. NO. NO. BEZEICHNUNG DESCRIPTION Ersatzteilliste Spare Parts List * D GB 10 / 93 BEDIENPLA TTE I CONTROL BOARD I SACH-NR. / PART NO.: 27507-007.31 BEZEICHNUNG DESCRIPTION SACHNUMMER PART NUMBER POS. NR. POS ...

  • Grundig GV 460 VPT / NIC - page 167

    GV44…, GV45…, GV46… Ersatzteilliste / Spare Parts List GRUNDIG Service 6 - 19 POS. ABB. SACHNUMMER ANZ. NR. NR. POS. FIG. PART NUMBER QUA. NO. NO. BEZEICHNUNG DESCRIPTION Ersatzteilliste Spare Parts List * D GB 10 / 93 BEDIENPLA TTE II - B CONTROL BOARD II - B SACH-NR. / PART NO.: 27507-009.30 BEZEICHNUNG DESCRIPTION SACHNUMMER PART NUMBER PO ...

  • Grundig GV 460 VPT / NIC - page 168

    GRUNDIG Service Technik Änderungen vorbehalten Printed in Germany Service Manual Sach-Nr. 72010-514.90 Subject to alteration VK 222/1 1193 Service Manual Part No. 72010-514.90 22113 13509 04430 65760 90471 81541 Kolumbusstr . 14 Hamburg 040/73331-0 Wittestr . 30 e Berlin 030/43803-21 Leipzigerstr . 198 Böhlitz-Ehrenberg 0341/4588-0 Frankfurterstr ...

Manufacturer Grundig Category Camcorder

Documents that we receive from a manufacturer of a Grundig GV 460 VPT / NIC can be divided into several groups. They are, among others:
- Grundig technical drawings
- GV 460 VPT / NIC manuals
- Grundig product data sheets
- information booklets
- or energy labels Grundig GV 460 VPT / NIC
All of them are important, but the most important information from the point of view of use of the device are in the user manual Grundig GV 460 VPT / NIC.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Grundig GV 460 VPT / NIC, service manual, brief instructions and user manuals Grundig GV 460 VPT / NIC. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Grundig GV 460 VPT / NIC.

A complete manual for the device Grundig GV 460 VPT / NIC, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Grundig GV 460 VPT / NIC by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Grundig GV 460 VPT / NIC.

A complete Grundig manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Grundig GV 460 VPT / NIC - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Grundig GV 460 VPT / NIC, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Grundig GV 460 VPT / NIC, that we can find in the current document
3. Tips how to use the basic functions of the device Grundig GV 460 VPT / NIC - which should help us in our first steps of using Grundig GV 460 VPT / NIC
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Grundig GV 460 VPT / NIC
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Grundig GV 460 VPT / NIC in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Grundig GV 460 VPT / NIC?

Use the form below

If you did not solve your problem by using a manual Grundig GV 460 VPT / NIC, ask a question using the form below. If a user had a similar problem with Grundig GV 460 VPT / NIC it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)