English dropdown-ico

Manual Honeywell HD-16DVR-C

169 pages 5.04 mb
Download

Go to site of 169

Summary
  • Honeywell HD-16DVR-C - page 1

    HD-16DVR-C Digital Video Recorder User Manual © 2010 Honeywell International Inc. All rights reserved. http://www.security.honeywell.com Rev. A ...

  • Honeywell HD-16DVR-C - page 2

    ...

  • Honeywell HD-16DVR-C - page 3

    Honeywell i Contents 1 Features and S pecificat ions ................................................................................................ 1 Overview ...................................................................................................................... 1 Featur es .......................................................... ...

  • Honeywell HD-16DVR-C - page 4

    Honeywell ii RS485 ........................................................................................................................ 22 USB ........................................................................................................................... 2 3 4 Overview of Naviga tion and Cont rols ................................... ...

  • Honeywell HD-16DVR-C - page 5

    Honeywell iii PTZ Setu p .......................................................................................................... 49 PTZ Trac e........................................................................................................... 51 Preset/Tour/Pattern/S can Operat ions ........................................................ ...

  • Honeywell HD-16DVR-C - page 6

    Honeywell iv TV Adju st ............................................................................................................ 84 Video Ma trix........................................................................................................ 84 Informati on ................................................................................ ...

  • Honeywell HD-16DVR-C - page 7

    Honeywell v Figures Figure 2-1 The Fr ont Panel of HD-16DVR-C ................................................................................ 7 Figure 2-2 The Rear Pan el of HD-16DVR-C ................................................................................. 9 Figure 2-3 Device Connecti on .................................................. ...

  • Honeywell HD-16DVR-C - page 8

    Honeywell vi Figure 4-14 Motion Detection Zone Setting ................................................................................ 39 Figure 4-15 PTZ Activation Setting ............................................................................................. 40 Figure 4-16 Armed Period Se tting ............................................. ...

  • Honeywell HD-16DVR-C - page 9

    Honeywell vii Figure 5-2 General Setup Menu ................................................................................................. 61 Figure 5-3 DST Setup Menu (Weel) ........................................................................................... 61 Figure 5-4 DST setup menu ( Date) ........................................... ...

  • Honeywell HD-16DVR-C - page 10

    Honeywell viii Figure 5-25 HDD Managem ent Setup Menu ............................................................................. 79 Figure 5-26 Abnormity Setup Menu ............................................................................................ 80 Figure 5-27 Sample of No Dis k Abnormity ............................................. ...

  • Honeywell HD-16DVR-C - page 11

    Honeywell ix Figure 6-9 Control Setup ............................................................................................................ 98 Figure 6-10 Switch bet ween the Main Stream and Extra Stream ............................................... 98 Figure 6-11 Selection Menu of Local Play File .......................................... ...

  • Honeywell HD-16DVR-C - page 12

    Honeywell x Figure 6-32 RS232 Setup Men u ............................................................................................... 115 Figure 6-33 Net work Setup Menu ............................................................................................. 116 Figure 6-34 Email Setu p Menu ................................................ ...

  • Honeywell HD-16DVR-C - page 13

    Honeywell xi Figure 6-55 Alarm Function Menu ............................................................................................ 140 Figure 6-56 Web Client Infor mation .......................................................................................... 141 Figure 6-57 Logout Interface ................................................ ...

  • Honeywell HD-16DVR-C - page 14

    ...

  • Honeywell HD-16DVR-C - page 15

    Honeywell i We l c o m e Thank you for purchasing our DVR! Please refer to this user’s manual for the installatio n and operation of HD- 16DVR-C. Here you can find information about this series DVR features and functions, as well as a detailed menu tree. Before installation and operation please read the follo wing safeguards and warnings carefull ...

  • Honeywell HD-16DVR-C - page 16

    Honeywell ii  Software CD  USB mouse  Network cable  Power cord  DB-25 cable with extensi ble audio inputs  SATA data cable and screws for HDD i nstallation  User manual  Remote controller  HDMI cable Contact your local retailer ASAP if so mething is broken in your package. ...

  • Honeywell HD-16DVR-C - page 17

    Honeywell 1 1 Features and S pecifications Overview HD-16DVR-C is an excellent digital video surveill ance product. It adopts embedded Linux OS to maintain reliable operatio n. Popular H.264 compression algorithm and G.711 audio compression technology realize high quality, low bit stream. Unique frame-by-frame pl ay function is suitable for detail ...

  • Honeywell HD-16DVR-C - page 18

    Features and Specifications 2  A/V compression Supports multi-channel a udio and video. Independ ent hardware codecs encodes and decodes the audio a nd video signal from each channel to maintain video and audio synchronization.  Backup function Provides local backup via USB port for flash disks and portabl e HDDs IE web client can download th ...

  • Honeywell HD-16DVR-C - page 19

    Honeywell 3 Specification Parameter HD-16DVR-C Main Processor High-performance industria l embedded micro controller OS Embedded LINUX System Resources Multiplex operations: simulta neous multi-channel recording, multi-channel playback and net work operation Interface User-friendly graphical us er interface Input Devices Front panel, USB mouse, rem ...

  • Honeywell HD-16DVR-C - page 20

    Features and Specifications 4 Resolution (PAL/NTSC) PAL/NTSC Real-time monitoring: D1 704×576/704× 480 Playback: D1 704×576/704×48 0 (6/7 f/s, ch1 & ch9 up to 25/30 f/s when other channels are of CIF), CIF 352× 288/ 352×240, QCIF 176×144/176×120 Support dual streams: extra stream resolution QCIF 176×144/176× 120 Motion Detection Zone ...

  • Honeywell HD-16DVR-C - page 21

    Honeywell 5 Various File Swit ch Ways Can switch to previous or next file or any file in current play list. Can switch to file on other channel of the same time (if existing). Supports continuous file playback; when a file is ended, system automatically play s th e next file in the current channel Multi-channel Playback Support maximum 16-channel s ...

  • Honeywell HD-16DVR-C - page 22

    Features and Specifications 6 RS232 Ordinary serial port (for upgra de and maintenance) and transparent serial port (COM input and output via net work ) Hard Disk Information Displays HDD current status Data Stream Statistics Data stream statistics for each channel (in wave mode) Log statistics Display maximum1024 lo gs. Support various search engi ...

  • Honeywell HD-16DVR-C - page 23

    Honeywell 7 2 Overview and Controls This section provides information about front panel a nd rear panel. When you install this series DVR for the first time, please refer to this part first. Front Panel The front panel is shown in Figure 2-1 . Figure 2-1 The Front Panel of HD-16DVR-C Please refer to the following sheet for front panel b utton infor ...

  • Honeywell HD-16DVR-C - page 24

    Overview and Controls 8 Shift current activated control, Left/2 Right/3   During playback, click these buttons to control pla yback bar. Confirm current operation Go to default button Menu/Enter Menu Go to menu Go to previous menu, or cancel current oper ation. ESC ESC During playback, click it to restore real-time monitor mo de. Shift Shift ...

  • Honeywell HD-16DVR-C - page 25

    Honeywell 9 normal playback. In live view, press this key to enter Search interface. Reverse/Pause   In normal playback or pause mode, click this button to reverse playback In reverse playback, click this button to paus e playback. Fast play  Vario us fast speeds and normal playback. Slow play Multiple slow play speeds or normal pla yback. ...

  • Honeywell HD-16DVR-C - page 26

    Overview and Controls 10 No. Description 1 Power button 2 Power input port 3 Fan 4 Loop video output 5 1st - 4th channel audio input 6 Video input 7 DB25 port (5th to 16th-channel audio input po rt) 8 Audio output 9 Intercom input port 10 Intercom output port 11 Net work port 12 eSAT A port (reserved, not effective for HD-16DVR-C) 13 RS232 port 14 ...

  • Honeywell HD-16DVR-C - page 27

    Honeywell 11 Figure 2-3 Device Connection Remote Controller The remote controller interface i s shown as in Figure 2-4 . ...

  • Honeywell HD-16DVR-C - page 28

    Overview and Controls 12 Figure 2-4 Remote Controller No. Function 1 Record search 2 Multiple-w indow switch 3 0-9 number keys 4 ESC, Cancel 5 Reserved, not effective for H D-16DVR-C 6 Confirm / menu ke y 7 Direction k eys 8 Auxiliar y func tion key 9 Remote address sw itch 10 Previous 11 Backward playback 12 Slow play 13 Play/Pause 14 Fast play 15 ...

  • Honeywell HD-16DVR-C - page 29

    Honeywell 13 16 Record Mouse Control The password input dial ogue box will pop up if you have not logged in. In real-time monitor mode, you can go to the main menu. When you have selected on e menu item, left click the mouse to view menu content. Implement the control operation. Modify checkbox or motion d etection status. Click combo box to bring ...

  • Honeywell HD-16DVR-C - page 30

    Overview and Controls 14 Implement special control operation suc h as double click one item in the file list to playback the video. Double left click mouse In multiple- window mode, double left click one channel to vie w in full-window. Double left click current video again to go ba ck to previous multiple-window mode. In real-time monitor mode, th ...

  • Honeywell HD-16DVR-C - page 31

    Honeywell 15 3 Inst allation and Connections Note All the installation and operations here should conform to your local electrical safety rules Check Unpacked DVR When you receive the DVR from the forwarding a gent, please check whether there is any visible damage. The prote ctive materials used for the package of the DVR can protect du ring most t ...

  • Honeywell HD-16DVR-C - page 32

    Installation and Connections 16 Please follow the instructions below to in stall the hard disk. 1. Loosen the screws and remove the the upper cover. 2. Line up the HDD to the four holes of the HDD bracket. 3. Use four screws to fix HDD. 4. Unfasten the HDD power cable. 5. Use the SATA data cable to connect the HDD and SATA port. 6. Insert the HDD p ...

  • Honeywell HD-16DVR-C - page 33

    Honeywell 17 Connecting Power Supply Please check whether the input voltage matche s device power sup ply rating. We recommend you use UPS to guarantee steady operation, DVR life span, and other peripheral equipments’ op eration such as cameras. Connecting Video Input and Output Devices Connecting Video Input The video input interface is BNC. The ...

  • Honeywell HD-16DVR-C - page 34

    Installation and Connections 18 Connecting Video Output Main video output includes BNC (CVBS PAL/NTSC, 1.0VP-P, 75 Ω ), VGA and HDMI. SPOT (matrix) output and lo op output are also support ed by BNC connection. The system supports the three ki nd s of outputs at the same time. 1280x720 (720p) resolution setting is recommen ded for HDMI output. Wh ...

  • Honeywell HD-16DVR-C - page 35

    Honeywell 19 If the sound box and the pick-up cannot be separated spatially, it is easy to cause a squeakin g noise. In this case you can adopt the followi ng measures:  Use better sound pick-up with better directing property .  Reduce the volume of the sound box.  Use more sound-absorbin g materials in decoration to redu ce voice echo and ...

  • Honeywell HD-16DVR-C - page 36

    Installation and Connections 20 Figure 3-1 Alarm Input and Output Parameter Grounding Alarm Ground line Alarm Input 1-16 becom e valid in low voltage. Relay Output 1-4 NO C: four Normal Open activation outputs. 5 NO C NC: Normal Open – Normal Closed dual activ ation output Ctrl 12V Controllable +12VDC po wer output as the 6th alarm output channel ...

  • Honeywell HD-16DVR-C - page 37

    Honeywell 21 Figure 3-2 Sample of Alarm Input (Normal Close Ty pe) Alarm Output Port  Three ways to relay alarm output (NO contact). External power su pply is needed for external alarm device.  To avoid overloading, please read the following relay parameters sheet carefully.  6 ways relay alarm output (NO co ntact). Provide external power ...

  • Honeywell HD-16DVR-C - page 38

    Installation and Connections 22 Surge voltage Between touches w ith same polarity 1500V (10×160us) Length of open time 3ms max Length of closed time 3ms max Mechanical 50×106 times (3Hz) Longevity Electrical 200×103 times (0.5Hz) Temperature -40 ~ ℃ +70 ℃ RS232 RS232 port is reserved for techni cal support diagnosi s and upgrade. RS485 When ...

  • Honeywell HD-16DVR-C - page 39

    Honeywell 23 e. The voltage between of A,B lines of the decoder should be less than 5v. 2. Connect the other end of the cable to the prop er pins in the connec tor on the camera. 3. Please follow the instructions to configure a came ra to enable each PTZ device on the DVR. Figure 3-3 PTZ Connection Port RS-485 port USB The USB port is for the USB s ...

  • Honeywell HD-16DVR-C - page 40

    Overview of Navigation and Controls 24 4 Overview of Navigation and Controls Before operation, please m ake sure you have properly installed HDD and all the cable connections. Login, Logout & Main Menu Login After the system has booted up, default video display will be in multiple- window mode. Press Menu on the from panel or the remote cont ro ...

  • Honeywell HD-16DVR-C - page 41

    Honeywell 25 Figure 4-1 Menu Login Main Menu After you have logged in, the system main menu will appear a s shown below. See Figure 4-2 . There are a t otal of six icons: se arch, information, setting, backup, advanced and shut down. You can move the cursor to highlight the icon, an d then double-click the mouse to enter the sub-menu. Figure 4-2 Ma ...

  • Honeywell HD-16DVR-C - page 42

    Overview of Navigation and Controls 26 One is from menu option: In the main menu, click the shut down button, and you can see an interface as shown below. See Figure 4-3 . Figure 4-3 Logout Me nu You have several options. See Figure 4-4 . Figure 4-4 O ptions for Logout The other way is to press the power button on the fro nt panel for at least 3 se ...

  • Honeywell HD-16DVR-C - page 43

    Honeywell 27 Manual Record Live Viewing After you have logged in, the system is in live viewing mode. You can see the system date, time and channel name. If you want to chang e the system date and time, you can refer to general settings ( Main Menu  Setting  General ). If you want to modify the channel n ame, refer to the display settings ( M ...

  • Honeywell HD-16DVR-C - page 44

    Overview of Navigation and Controls 28  Manual: The highest priorit y. After being set to manual mode, all selected channel s will start regular (continuous) recording.  Automatic: Channel record ing follows recording schedule setting ( Main Menu  Setting  Schedule )  Closed: the channel stops recording. Figure 4-5 Recording Control ...

  • Honeywell HD-16DVR-C - page 45

    Honeywell 29 When system is in automat ic recording, all channel s will be recorded as you set up in Main menu  Setting  Schedule . The corresponding indication light on th e front panel will turn on. Figure 4-7 Automatic Recording in All Channels  Manual recording in all channel s Highlight “ALL” after “Man ual.” See Figure 4-8 . ...

  • Honeywell HD-16DVR-C - page 46

    Overview of Navigation and Controls 30 Figure 4-9 Stop Recording in All Channels Search & Playback Search Menu Click the search button in the main m enu, search interface i s shown below. See Figure 4-10 . Usually there are three file types:  R: Regular recording file.  A: External alarm recordi ng file.  M: Motion detection recording ...

  • Honeywell HD-16DVR-C - page 47

    Honeywell 31 Figure 4-10 Record Search Menu 15 Please refer to the following chart for more information. Serial Number Function 1 Play 2 Backward 3 Stop 4 Slow play 5 Fast play 6 Previous frame 7 Next frame 8 Volume 9 Previous file 10 Next channel 11 Next file ...

  • Honeywell HD-16DVR-C - page 48

    Overview of Navigation and Controls 32 12 Previous channel 13 Search 14 Backup 15 Redundancy Search Basic Operation Playback There are various search modes: video type, channe l number or time. The system can display a max of128 files in one screen. You can u se the page up/down button to view if there are more than one p age. By selecting the file ...

  • Honeywell HD-16DVR-C - page 49

    Honeywell 33 Button Illustration Remarks Fast play button  In playback mode, click this button to switch between vari ous fast play modes such as fast play 1, fast play 2 and more. Slow play button ► In playback mode, click this button to switch between va rious slow play modes such as slow play 1 or slo w play 2. Frame rate may vary due to di ...

  • Honeywell HD-16DVR-C - page 50

    Overview of Navigation and Controls 34 rounds, you get fast backward 2. You can continue turning to get different speed. Manual playback frame by frame In playback, click play/pause button to pause normal playback, slo wly turn the jog (inner dial) clock-wise to view frame by frame, counter clock wise to scan I frame. Note All the operations here ( ...

  • Honeywell HD-16DVR-C - page 51

    Honeywell 35 Schedule After the system has booted up it w ill enter a default 24-hour regular mode. You can set the record type and time in schedule inte rface. Schedule Menu In the main menu, from Setting to Schedule, you can go to the sch edule menu. See Figure 4-12 .  Channel: Please select the cha nnel number first. You can select “all” ...

  • Honeywell HD-16DVR-C - page 52

    Overview of Navigation and Controls 36 Figure 4-12 Schedule Menu Quick Setup This function allows you to copy one channel setup to anothe r. After setting one channel, you can click the Copy button and swit ch to another channel and then click the Paste button. You can finish setting one chan nel and click the Save button to keep the setting of tha ...

  • Honeywell HD-16DVR-C - page 53

    Honeywell 37 If current channel is recording now, the setup will get activated immediately, and the current record will be terminated and a new file is created as redundancy recording is st arted. After setup is completed, please cli ck save button, system goes back to the previous menu . Search and playback of the records in the redu ndant disk. I ...

  • Honeywell HD-16DVR-C - page 54

    Overview of Navigation and Controls 38  Show message: The sy stem will send message to the local host screen to alarm you if you have enabled this function.  Send email: The system can se nd out an email to alert you when the alarm occurs.  PTZ activation: Here you can set PTZ movement (of a ny video channels) su ch as going to a preset wh ...

  • Honeywell HD-16DVR-C - page 55

    Honeywell 39 Figure 4-13 Motion Detection Menu Figure 4-14 Motion Detection Zone Setting ...

  • Honeywell HD-16DVR-C - page 56

    Overview of Navigation and Controls 40 Figure 4-15 PTZ Activation Setting Figure 4-16 Armed Period Setting Figure 4-17 Business Day and Non-Business Day Setting ...

  • Honeywell HD-16DVR-C - page 57

    Honeywell 41 Video Loss In Figure 4-13 , select “Video Loss” from the type list. You can see the interface is shown in Figure 4-18 . This function allows you to be informed whe n video loss has oc curred. You can enable the alarm output ch annel and enable the show message function. Tips: You can enable preset activation operation when video lo ...

  • Honeywell HD-16DVR-C - page 58

    Overview of Navigation and Controls 42 Note In “Detect” interface, the copy/paste function is only valid for the same type, which means you cannot copy a cha nnel setup in video loss mode to camera maski ng mode. Figure 4-19 Menu of Camera Masking Alarm Setup and Alarm Activation Before operation, make su re you have properly connected alarm de ...

  • Honeywell HD-16DVR-C - page 59

    Honeywell 43  Event type: Select local input. Netw ork input is not effective in HD- 16DVR-C.  Type: Normally open or normally closed.  PTZ activation: Here you can set PTZ movement wh en the alarm occurs. For example, go to preset, tour& pattern wh en there is an alarm. Click Select , and you can se e an interface as shown in Figure 4 ...

  • Honeywell HD-16DVR-C - page 60

    Overview of Navigation and Controls 44 Figure 4-20 Menu of the Alarm Figure 4-21 PTZ Activation Settings ...

  • Honeywell HD-16DVR-C - page 61

    Honeywell 45 Figure 4-22 Period Setup Figure 4-23 Business Day s and Non-Business Days Settings Backup DVR supports various backup d evices such as CD-RW, DVD driver, USB backup and network downl oad. The reco rds can be played with PC by the Record Player contained in the CD. He re we introduce USB backup first. You can refer to Web Client Operati ...

  • Honeywell HD-16DVR-C - page 62

    Overview of Navigation and Controls 46 Detect Device Click Backup , and you can see an inte rface shown in Figure 4-24 . Here you can view device information. You can view the backup device name a nd its total space and free space. The device includes a USB burner, flash disk, SD card and portable HDD. Note The USB Flash Disk models listed in Appen ...

  • Honeywell HD-16DVR-C - page 63

    Honeywell 47 When the system completes backup, you can see a d ialogue box prompting successful backup. Figure 4-25 Backup Menu w ith Search Results Click Start , and the system will begin the burning p rocess. At the same time, the Start button will change to the Stop button. You can view the remaining time and process bar at the bottom left. See ...

  • Honeywell HD-16DVR-C - page 64

    Overview of Navigation and Controls 48 The file name format usually is: SN_CH+channel n umber+time Y+M+D+H+M+S. In the file name, the YD M format is the same as what you set in general interface ( Main Menu  Setting  Ge neral ). The file extension name is “.dav”. You can visi t our web site to view listed CD-ROM brands. Tips: During the b ...

  • Honeywell HD-16DVR-C - page 65

    Honeywell 49 PTZ Setup Note The camera video should be in the curren t screen. Before setup, check wheth er the following connec tions are right:  PTZ and decoder connection  Decoder address setup  Decoder A (RS485 +) / B (RS485 -) line con nects with DVR A/B line Boot up the DVR, and input the user name and password. In the main menu, sel ...

  • Honeywell HD-16DVR-C - page 66

    Overview of Navigation and Controls 50 Figure 4-27 PTZ Setup Menu After completing all the settings click Save . In the single window displ ay (View 1) mode, right-click to open the interface shown in Figure 4-28 (by clicking Fn in the front pan el or in the remote controller will cause a menu to appea r with only Pan/Tilt/Zoom and Color Setting op ...

  • Honeywell HD-16DVR-C - page 67

    Honeywell 51 Here you can set the following items:  Step: value ranges from 1 to 8.  8 direction arrows for PTZ position adjustment  Zoom  Focus  Iris Click the buttons and to adjust zoom, focus and iris. Note Some functions are not supported by some PTZ spee d dome. For example, Zoom, Focus, Iris and Pattern are not supported by HSP ...

  • Honeywell HD-16DVR-C - page 68

    Overview of Navigation and Controls 52 Name Function key function Shortcut key Function key function Shortcut Key Zoom Near Far  Focus Near │  Far ►│ Iris Close   Open ►  Preset/Tour/Pattern/Scan Operations In Figure 4-29 , click Set . The interface is shown as b elow. See Figure 4-30 . Here you can set the following items: ? ...

  • Honeywell HD-16DVR-C - page 69

    Honeywell 53  Auto pan Figure 4-31 Function Menu Note  Preset, tour and pattern all need the value to be the control parameter. You can define it accordin g to the speed dome’s user ma nual.  You need to refer to your speed dome user’s manual for the auxiliary function definition. In some cases, it can be used for special processes. ? ...

  • Honeywell HD-16DVR-C - page 70

    Overview of Navigation and Controls 54 Figure 4-32 Preset Setup Activate Preset In Figure 4-31 , input the preset number in the “No. ” field, and click Preset . Patrol setup (Tour Setup) In Figure 4-30 , click Patrol . The interface is shown in Figure 4-33 . Input the preset number and add this preset to a patrol (tour). F or each patrol (tour) ...

  • Honeywell HD-16DVR-C - page 71

    Honeywell 55 Activate Patrol (tour) In Figure 4-30 , input the patrol (tour) num ber in the No. blank and click the patrol button. Pattern Setup In Figure 4-30 , click Pattern and then click “ begin . T he interface is shown as in Figure 4-34 . Then you can go to Figure 4-29 to modify zoom, focus, and iri s. Go back to Figure 4-3 4 and click End ...

  • Honeywell HD-16DVR-C - page 72

    Overview of Navigation and Controls 56 Figure 4-35 Auto Scan Setup Activate Auto Scan In Figure 4-31 , click Auto Scan , and th e system will begin to auto scan. Correspondingly, the Auto Scan button will change to the Stop button. Click Stop to terminate the scan operatio n. Click Page Switch again, and the syste m will go back to Figure 4-29 . ...

  • Honeywell HD-16DVR-C - page 73

    Honeywell 57 5 Underst anding of Menu Operations and Controls Menu Tree This series DVR menu tre e is shown as below. ...

  • Honeywell HD-16DVR-C - page 74

    Understanding of Menu O perations and Controls 58 Search (page 30 ) Information HDD Info BPS Log Version Onlin e Users Setting General Encode Schedule RS232 Menu Network Alarm Detect Pan / Tilt / Zoom Display Default Backup (page 45 ) Advance d HDD Management Alarm Output Abnormity Manual Record Account Auto Maintain TV Adjust Video Matrix Shutdown ...

  • Honeywell HD-16DVR-C - page 75

    Honeywell 59 Main Menu After you have logged in, the system main menu will appear a s shown below. See Figure 5-1 . There are a total of six buttons: Search , Info , Setting , Backup , Adv anced , and Shutdo w n . Move the cursor to highlight the icon, then double-click to enter the sub-menu. Figure 5-1 Main Menu – Setting Settings In the main me ...

  • Honeywell HD-16DVR-C - page 76

    Understanding of Menu O perations and Controls 60  Date separator: There are three de not ations to separate the date: dot, beeline and solidus.  DST: Here you can set DST time and da te. Please enable DST function and then click set button. You can see an interface is shown as in Figure 5-3 . Here you can set start time and end time by setti ...

  • Honeywell HD-16DVR-C - page 77

    Honeywell 61 Figure 5-2 General Setup Menu Figure 5-3 DST Setup Menu (Weel) Figure 5-4 DST setup menu (Date) Encode Encode setting includes the following items . See Figure 5-5 . ...

  • Honeywell HD-16DVR-C - page 78

    Understanding of Menu O perations and Controls 62 Note that some series do not support e xtra stream.  Channel: Select the channel you want.  Compression: System supports H.264.  Resolution: System suppor ts various res olutions, D1(4CI F)/CIF/QCI F. You can select from the dropdown list. The extra stream of each channel supports only Q CI ...

  • Honeywell HD-16DVR-C - page 79

    Honeywell 63 Figure 5-5 Encode Menu Figure 5-6 Overlay Menu Schedule Refer to Schedule on page 35 . RS232 RS232 interface is shown as follows. There are five items. See Figure 5-7 . ...

  • Honeywell HD-16DVR-C - page 80

    Understanding of Menu O perations and Controls 64  Function: There are two modes for you to select. Con sole is for serial port or min-end platform to upgrade pro gram. Adaptor is reserved for system integration or function enhancem ent.  Baud rate: You can select proper b aud rate.  Data bit: You can select proper data bit.  Stop bit: ...

  • Honeywell HD-16DVR-C - page 81

    Honeywell 65  DHCP: It is to activate auto sear ch IP. When you enable the DHCP function, you cannot modify the IP/Subnet mask /Gateway. These values are from the DHCP function. If you have not enabled the DHCP function, IP/Subnet mask/Gateway will display as zero. You need t o disable the DHCP function to view current IP information. When PPPOE ...

  • Honeywell HD-16DVR-C - page 82

    Understanding of Menu O perations and Controls 66 Figure 5-9 Advanced Settings IP Filter IP filter interface is shown in Figure 5-10 . You can add IP in the following list. The list supports a max of 64 IP addresses. Note that after you enable this functi on, only the IP listed below can access current DVR. If you disable this function, all IP addr ...

  • Honeywell HD-16DVR-C - page 83

    Honeywell 67 After rebooting, DVR will connect to the internet automatically. The IP in the PPPoE is the DVR dynamic value. You can access this IP to vis it the unit. Figure 5-11 PPPOE Setup Menu NTP Setup You need to install SNTP server (Such as Absol ute Time Server) in your PC first. In Windows XP OS, you can us e the command “net start w32tim ...

  • Honeywell HD-16DVR-C - page 84

    Understanding of Menu O perations and Controls 68 Sydney GMT+10 Hawaii GMT-10 Alaska GMT-9 Pacific Time(P.T) GMT-8 American Mountain Time(M.T) GMT-7 American Central Time(C.T ) GMT-6 American Eastern Time(E.T) GMT-5 Atlantic Time GMT-4 Brazil GMT-3 Middle Atlantic Time GMT-2 Figure 5-12 NTP Setup Menu DDNS Setup DDNS setup interface is shown in Fig ...

  • Honeywell HD-16DVR-C - page 85

    Honeywell 69 Now you can open the DDNS Server web se arch page. Figure 5-13 DDNS Setup Menu Note that the NNDS type includes: CN99 DDNS 、 NO-IP DDNS 、 Private DDNS 、 Dyn dns DDNS and sysd ns DDNS. The private DDNS function is reserved for integration, and currently is not effective on HD-16DVR-C. FTP You need to download or buy a FTP se rvice ...

  • Honeywell HD-16DVR-C - page 86

    Understanding of Menu O perations and Controls 70 Figure 5-14 FTP Server Setup Menu You can use a PC or FTP login tool to test setup. For example, you can login user ZHY to FTP://10.10.7.7 and then test whether it can modify or delete the folder or not. See Figure 5-15 . Figure 5-15 FTP Login Window The system also has the capability to upload mult ...

  • Honeywell HD-16DVR-C - page 87

    Honeywell 71 Figure 5-16 FTP Setup Menu Please check the box left to Enable to activate the FTP function. Here you can input the FTP server address, port and remote di rectory. When the remote directory is null, t he system automatica lly creates folders according to the IP, time and channel. User name and password is the acco unt information for y ...

  • Honeywell HD-16DVR-C - page 88

    Understanding of Menu O perations and Controls 72 Figure 5-17 Email Setup Menu Refer to the following table for detailed informatio n. Parameter Function SMTP Server Input server address and then enable this fun ction. Port Default value is 25. You can modify it if necessary. User Name T he sender email account use r name. Password The sender email ...

  • Honeywell HD-16DVR-C - page 89

    Honeywell 73  Under Windows Command Prompt, input ping smtp.google.com then press return.  The displayed IP address 74.125.45.25 is the SMTP server IP address. Figure 5-18 Command Window Alarm Refer to Alarm Setup and Alarm Activation on page 42 . Detect Refer to Detect on page 37 . Pan/Tilt/Zoom The pan/tilt/zoom setup includes the followin ...

  • Honeywell HD-16DVR-C - page 90

    Understanding of Menu O perations and Controls 74 After completing all the setups click Save , and the system will go b ack to the previous menu. For a detailed setup, refer to Preset/Tour/Pattern/Scan Operatio ns on page 52 . Figure 5-19 PTZ Setup Menu Display Display setup interface is shown as below. See Figure 5-20 .  Transparency : Here you ...

  • Honeywell HD-16DVR-C - page 91

    Honeywell 75  Enable tour: Activate tour function.  Interval: Input proper interval val ue here. The value ranges from 5-120 seconds. In tour proce ss, you can use the mouse or click Shift to turn on the window switch function. Stands for opening switch function, stands for the closing swit ch function.  Motion tour and alarm tour type: 1- ...

  • Honeywell HD-16DVR-C - page 92

    Understanding of Menu O perations and Controls 76 Figure 5-21 Channel Name Setup Menu In tour mode, you can see the following interface. On the right corner, right- click the mouse or click Shift , and you can control the tour. There are two buttons: stands for enabling window swi tch and stands for enabling window function. See Figure 5-22 . Figur ...

  • Honeywell HD-16DVR-C - page 93

    Honeywell 77  Select all  General  Encode  Schedule  RS232  Network  Alarm  Detect  Pan/tilt/zoom  Display  Channel name After all the setups please click the save button, the system will go back to the previous menu. Note System language, video format and user accounts can not be restored to default setup. Figure 5 ...

  • Honeywell HD-16DVR-C - page 94

    Understanding of Menu O perations and Controls 78 Advanced Select Advanced on the main win dow, and the interface is shown as follows. See Figure 5-24 . There are seven function keys in total: HDD manag ement, alarm output, abnormity, manual record, account, auto maintenance, TV adjust and video matrix. Figure 5-24 Advanced Menu HDD Management Here ...

  • Honeywell HD-16DVR-C - page 95

    Honeywell 79 Figure 5-25 HDD Management Setup Menu Click Alarm Set , and the interface is shown a s follows. See Figure 5-26 (this inte rface is just like the abnormity setup). Refer to Abnormity on page 80 for detailed information. Please check boxes to select the correspondi ng function. ...

  • Honeywell HD-16DVR-C - page 96

    Understanding of Menu O perations and Controls 80 Figure 5-26 Abnormity Setup Menu Abnormity Abnormity interface is shown in Figure 5-27 .  Event type: There are several options fo r you such as disk error, no disk and etc.  Alarm output: alarm activation output port (multiple choice s). The 3-ch is controllable 12V output.  Delay: you can ...

  • Honeywell HD-16DVR-C - page 97

    Honeywell 81 Figure 5-27 Sample of No Disk Abnormity Alarm Output Here you can set proper alarm outp ut. Automatic : start the alarm output automatica lly according to the settings of Detection/Alarm/Abnormity. Manual : manually start the alarm output Closed : manually stop the alarm output Please select the mode of corre sponding alarm output, the ...

  • Honeywell HD-16DVR-C - page 98

    Understanding of Menu O perations and Controls 82 Figure 5-28 Alarm Output Setup Menu Manual Record Refer to Manual Reco rd on page 27 . Account Here you cam implement account manageme nt. See Figure 5-29 . to see how to:  Add new user  Modify user  Add group  Modify group  Modify password. For account management please note:  The ...

  • Honeywell HD-16DVR-C - page 99

    Honeywell 83  Hidden user “default” is for system interi or use only and cannot be deleted. When there is no login user, hidden user “def ault” automatically login. You can set some rights such as monitor capability for this user so that you can view some channels with out login.  One user should belong to one group. Users’ rights c ...

  • Honeywell HD-16DVR-C - page 100

    Understanding of Menu O perations and Controls 84 Figure 5-30 Auto Maintain Setup Menu TV Adjust Here you can adjust the TV output setup. See Figure 5-31 . Please drag slide bar to adjust each item . After all the setups please click OK , the system will return to the previous menu. Figure 5-31 TV Adjust Menu Video Matrix Here you can set channels ...

  • Honeywell HD-16DVR-C - page 101

    Honeywell 85 Figure 5-32 Video Matrix Menu Information Here you can view system information. There is a total of five items: HDD (hard disk information), BPS (data stream statistics), Log and version, and online user. See Figure 5-33 . ...

  • Honeywell HD-16DVR-C - page 102

    Understanding of Menu O perations and Controls 86 Figure 5-33 Info Menu HDD Information Here is a list of hard disk type, total spa ce, free space, video start time and status. See Figure 5-34 . ○ mean s current HDD is normal. X mean s there is an erro r. - means there is no HDD. If the disk is damaged, system will show a “?”. Please remove t ...

  • Honeywell HD-16DVR-C - page 103

    Honeywell 87 Figure 5-34 HDD Info Menu Tips: Click Fn or left click the mouse b utton to view the HDD record time and HDD type and time. BPS Here you can view current video data stream (KB/s) and occupied hard disk storage (MB/h). See Figure 5-35 . ...

  • Honeywell HD-16DVR-C - page 104

    Understanding of Menu O perations and Controls 88 Figure 5-35 BPS Display Menu Log Here you can view the system log file. The system list s the following information. See Figure 5-36 . Log types in clude system o peration, configuration operation, data management, alarm event, record operation, log cle ar and etc. Select the start time and end time ...

  • Honeywell HD-16DVR-C - page 105

    Honeywell 89 Figure 5-36 Log Search Menu Version Here you can view some informati on related to this version. See Figure 5-37 .  Channel  Alarm in  Alarm out  System version:  Build Date ...

  • Honeywell HD-16DVR-C - page 106

    Understanding of Menu O perations and Controls 90 Figure 5-37 Version Menu Online Users Here you can manage online users. See Figure 5-38 . You can disconnect one user or blo ck o ne user if you have proper system rights. The max disconnect ion time during setup is 65535 second s. ...

  • Honeywell HD-16DVR-C - page 107

    Honeywell 91 Figure 5-38 Online Users Menu Shutdown Left click the shutdown button, the system will pop up a dialog ue box for you to select. See Figure 5-39 .  Log out menu user: log out menu. You need to input password when you login the next time.  Restart application: reboot DVR.  Shutdown: system shuts do wn and turns off power.  R ...

  • Honeywell HD-16DVR-C - page 108

    Understanding of Menu O perations and Controls 92 Figure 5-39 Shutdown Menu ...

  • Honeywell HD-16DVR-C - page 109

    Honeywell 93 6 W eb Client Operation Note There might be slight differences in the interface due to software update. Network Connection Before the web client operation, pl ease check the followin g items:  Network connection is right  DVR and PC network setu p is right. Please refer to network setup ( main menu  setting  network )  U ...

  • Honeywell HD-16DVR-C - page 110

    Web Client Operation 94 Figure 6-1 Sample of IE Login Input your IP address here. A system pop up with warni ng information will ask you if you want to install webrec.cab control. Please click yes butt on. If you can’t download the ActiveX file, please modify your settings as follows. See Figure 6-2 and Figure 6-3 . Figure 6-2 Interne t Options W ...

  • Honeywell HD-16DVR-C - page 111

    Honeywell 95 Figure 6-3 Settings for ActiveX After installation, the interface is shown as below. See Figure 6-4 . Please in put your user name and password. Default factory name is admin and password is admi n. Note For security reasons, please modify your password after you first login. ...

  • Honeywell HD-16DVR-C - page 112

    Web Client Operation 96 Figure 6-4 Web Login Windo w After you logged in, you can see the main window. See Figure 6-7 . This mai n window can be d ivided into the following sections.  Section 1: There are five function buttons: configurati on (see Configuration on page 104 ), sea rch (see Search on page 134 ), alarm (se e Alarm on page 139 ), ab ...

  • Honeywell HD-16DVR-C - page 113

    Honeywell 97 o Preview window switch. System support 1/4/8/9/16-window real - time preview. Please you need to have the proper rights to implement preview operation. Y ou cannot preview if you have no right to preview the either channel. See Figure 6-6 . Figure 6-6 Prev iew Window Switch Menu Figure 6-7 Main Menu of Web Client Section 3 Section1 Se ...

  • Honeywell HD-16DVR-C - page 114

    Web Client Operation 98 Figure 6-9 Control Setup 1 2 3 4 5 6  1: Digital zoom: Click this button and th en left drag the mouse in the zone to zoom in. Right clicking mouse system restore s original status.  2: Change show mode: resize or switch to full screen mode.  3: Local record. When you click the local record b utton, the system begin ...

  • Honeywell HD-16DVR-C - page 115

    Honeywell 99 You can click this button to enable audio talk. Local Play Click Local Play , and the system pops up the followin g interface for you to select local play file. See Figure 6-11 . Figure 6-11 Selection Menu of Local Play File PTZ Before PTZ operation, make sure you have properly set PTZ protocol. (Please refer to PTZ on page 126 System ...

  • Honeywell HD-16DVR-C - page 116

    Web Client Operation 100 Figure 6-12 PTZ Control Menu Direction key and 3D positioning key You can click this icon to display or hide the PT Z control platform. In Figure 6-12 , there are eight direction keys. In the middle of the eight direction keys, there is a 3D intelligent positioning key. When you click the 3D intelligent po si tioning key, t ...

  • Honeywell HD-16DVR-C - page 117

    Honeywell 101 Iris close Open In Figure 6-12 , click the PTZ setup button and you will see the foll owing interface. See Figure 6-13 . Figure 6-13 PTZ Setup Menu Auto Scan In Figure 6-13 , move the camera to your desired location and then rotate it to left rotation limit and click Left Limit . Then move the camera again and rotate it to the right r ...

  • Honeywell HD-16DVR-C - page 118

    Web Client Operation 102 -13 , move the camera to your desired location and then input e. Click the add button, and you will have set one preset. input the auto tour value and preset value. Click the add will have a dded one preset in the tour. the assistant it em from the dro pdown list. See Figure 6-14 . In Figure 6 pre set valu Auto tour In Figu ...

  • Honeywell HD-16DVR-C - page 119

    Honeywell 103 Or you can click the default button to use the system default setup. Figure 6-15 Color Setup Menu Picture Path and Record Path 5 , and you can see an interface sho wn in Figure Click “More” in Figure 6-1 6-16 . Figure 6-16 More Setup Menu Click PIC Path , and you can see an interface shown in Figure 6 -17 . Please click Choo se to ...

  • Honeywell HD-16DVR-C - page 120

    Web Client Operation 104 Figure 6-18 Path Setup Menu (for Record) Click Reboot , and the system pop s up the following dialog box. See Figure 6-19 , Please click OK to re boot. Figure 6-19 Reboot Dialog Note If there’s an administrator (e.g. 88888 8) logged in DVR local menu, or web user doesn’t have de vice reboot privilege, DVR won’t be reb ...

  • Honeywell HD-16DVR-C - page 121

    Honeywell 105 Figure 6-20 Version Information Menu HDD information Here you can view local storage statu s and network status including, free capacity and total capacity. See Figure 6-21 . ...

  • Honeywell HD-16DVR-C - page 122

    Web Client Operation 106 Figure 6-21 HDD Information Menu Log Here you can view system log. See Figure 6-22 . ...

  • Honeywell HD-16DVR-C - page 123

    Honeywell 107 Figure 6-22 Log Information Menu Click Backup , and the interface is sho wn in Figure 6-23 . Figure 6-23 Log Backup Menu Please refer to the following sheet for log para meter information. Parameter Function Type Log types include: system operation, configur ation operation, data management, alarm ev ent, record operation, user manage ...

  • Honeywell HD-16DVR-C - page 124

    Web Client Operation 108 Parameter Function Clear You can cl ick this button to delete all displayed lo g files. Please note system does not supp ort clear by type. Backup You can click this button to backup log files to current PC. System Configuration Please click Save to save your current setup. General Setup Here you can set system time, record ...

  • Honeywell HD-16DVR-C - page 125

    Honeywell 109 Figure 6-25 DST Setup Menu (Date) Figure 6-26 DST Setup Menu (Week) Please refer to the following table for det ailed information. Parameter Function System Time Used to modif y system time. Please click Save after your completed modification Sync PC You can click this button to sa ve the system time as your PC current time. Data Form ...

  • Honeywell HD-16DVR-C - page 126

    Web Client Operation 110 Language You can select the language from the drop down list. Device needs to reboot to get the modification activated. After reboot, please press F5 in IE or open a new IE window to update web client language. HDD Full There are two options: stop re cord ing or overwrite the previous files when HDD is full. Pack Duration H ...

  • Honeywell HD-16DVR-C - page 127

    Honeywell 111 Figure 6-28 Color Setting Menu Please refer to the following table for det ailed information. Parameter Function Channel For selecting a monitor channel. Channel Name Displ ays current channel name. You can modif y it. Compression H.264 Main Stream It includes main stream, motion stream and alarm stream. You can select different enco ...

  • Honeywell HD-16DVR-C - page 128

    Web Client Operation 112 Parameter Function Bit Rate Type There are two options: VBR a nd CBR. Please note, you can set video qua lity in VBR mode only. Quality The value ranges from 1 to 6. Level 6 is the best video quality. Bit Rate In CBR mode, actual bit rate is limited by this value The value only affects average bit rate in VB R mode. Please ...

  • Honeywell HD-16DVR-C - page 129

    Honeywell 113 Figure 6-29 Copy-To Menu Schedule Here you can set different periods fo r various days. The maximum is six periods in one day. See Figure 6-30 . Figure 6-30 Schedule Setup Menu ...

  • Honeywell HD-16DVR-C - page 130

    Web Client Operation 114 Figure 6-31 Date and Time Setup Menu Please refer to the following sheet for de tailed information. Parameter Function Channel Please select a chann el first. Pre-record Please input pre-recor d value here. System can record three to five seconds of video before activating the record operation in the file. (Depe nds on data ...

  • Honeywell HD-16DVR-C - page 131

    Honeywell 115 Parameter Function click Save . Refresh Click this button to get devic e latest configuration information. RS232 The RS232 interface is shown in Figure 6-32 . Figure 6-32 RS232 Setup Menu Please refer to the following sheet for de tailed information. Parameter Function RS232 COM 01 Console is for debug and u pgrade. Function Adapter i ...

  • Honeywell HD-16DVR-C - page 132

    Web Client Operation 116 Parameter Function Parity Multiple options: none, odd, even, etc. System default setup  Function: Console.  Data bit: 8  Stop bit: 1  Baud bit: 115200  Parity: None. Network The network interface is shown as in Figure 6 -33 . Figure 6-33 Network Setup Menu Please refer to the following sheet for de tailed inf ...

  • Honeywell HD-16DVR-C - page 133

    Honeywell 117 Parameter Function DHCP Dynamically get IP address. You can get the devic e IP from the DHCP server if you enabled this function. TCP Port Default value is 37777. HTTP Port Default value is 80. Max Connection Network user max amount. The value ra nges from 0 to 10. 0 means there is no user can access current devic e. Remote Host PPPOE ...

  • Honeywell HD-16DVR-C - page 134

    Web Client Operation 118 Figure 6-34 Email Setup Menu Please refer to the following sheet for de tailed information. Parameter Function SMTP Server Input server address and then enable this fun ction. Port Default value is 25. You can modify it if necessary. User Name T he sender email account use r name. Password The sender email account pass word ...

  • Honeywell HD-16DVR-C - page 135

    Honeywell 119 Figure 6-35 DDNS Setup Menu Please refer to the following sheet for de tailed information. Parameter Function Server Type You can select DDNS protoco l from the dropdown list and then enable DDNS function. The private DD NS protocol means you use your self-def ined private prot ocol to realize DDNS function. Server IP DDNS server IP a ...

  • Honeywell HD-16DVR-C - page 136

    Web Client Operation 120 Figure 6-36 NAS Setup Menu Please refer to the following sheet for detailed information. Parameter Function NAS enable Pleas e select network storage protocol and t hen enable NAS function. Server IP Input remote storage server IP address. Port Input Remote storage server-port number. User Name Log i n user account. File le ...

  • Honeywell HD-16DVR-C - page 137

    Honeywell 121 Parameter Function click the save button. Refresh Click this b utton to get device latest configuration information. NTP The NTP interface is shown in Figure 6-37 . Here you can realize network time synchronizatio n. Please enable current function and then input server IP, port number, time zone and upda te interval. Figure 6-37 NTP S ...

  • Honeywell HD-16DVR-C - page 138

    Web Client Operation 122 Figure 6-38 Alarm Setup Menu Please refer to the following sheet for de tailed information. Parameter Function Event Type It includes local alarm/network alarm. Local alarm: Device dete cts alarm from input port. Network: Device detects alarm from network. Alarm in Select corresponding alarm chan nel, and check the checkbox ...

  • Honeywell HD-16DVR-C - page 139

    Honeywell 123 Parameter Function alarm device when alarm occurs. Alarm Latch System can delay the alarm output for specified time after alarm ended. The value range s from 10 seconds to 300 seconds. Record Channel System auto activates current channel to record onc e alarm occurs (working with alarm activation function). Please note current device ...

  • Honeywell HD-16DVR-C - page 140

    Web Client Operation 124 Figure 6-39 The Detection Setup Men u Figure 6-40 The Detection Zone Setu p ...

  • Honeywell HD-16DVR-C - page 141

    Honeywell 125 Please refer to the following sheet for de tailed information. Parameter Function Event Type There are three types: Motion detection/video loss/Cam era Masking. Channel Select channel name from the dropdown list, and check the checkbox beside it to enable its motion detec tion function. Sensitivity There are six levels. T he sixth lev ...

  • Honeywell HD-16DVR-C - page 142

    Web Client Operation 126 Email If you enabled this function, th e system can send out email to alert you when alarms occur and end. Tour Display video in local monitor wind ow by tour. If there are record channels selected, only the record ch annels will be displayed in the tour. PTZ Activation Here you can set PT Z movement when alarm occurs. Such ...

  • Honeywell HD-16DVR-C - page 143

    Honeywell 127 Please refer to the following sheet for de tailed information. Parameter Function Channel You can select monitor channel from the dropdown list. . Protocol Select the corresponding dome protoco l (such as PELCOD), Address Set corresponding dome address. Default va lue is 1. Please note your setup here sh all comply with your dome a dd ...

  • Honeywell HD-16DVR-C - page 144

    Web Client Operation 128 Figure 6-42 Default Setup Menu Please refer to the following sheet for de tailed information. Parameter Function Select All Restore the factory default settings. Export Configuration Export syst em configuration to the local PC. Import Configuration Import confi gur ation from PC to the system. Advanced HDD Management HDD m ...

  • Honeywell HD-16DVR-C - page 145

    Honeywell 129 Figure 6-43 HDD Management Menu Please refer to the following sheet for de tailed information. Parameter Function Format Clear data in the disk. Read/write Set current disk as read/write. Read only Set current disk as read onl y. Redundant Set current disk as redundant recording. Recover Recover dada after error occurs. Please note sy ...

  • Honeywell HD-16DVR-C - page 146

    Web Client Operation 130 Figure 6-44 Alarm I/O Config Menu Please refer to the following chart for de tailed information. Parameter Function Alarm out There are six alarm output channels. Schedule (Automatic) Start the alarm output automat ically acc ording to the settings of Detection/Alarm/Abnormity. Manual Manually start the alarm output. Stop M ...

  • Honeywell HD-16DVR-C - page 147

    Honeywell 131 Figure 6-45 Record Control Menu Please refer to the following chart for de tailed information. Parameter Function Schedule (Auto) The system enables the auto record function as you set in record schedule setup. Manual Enable corresponding c hannel to record no matter what period is applied in the recor d setup. Stop Stop current chann ...

  • Honeywell HD-16DVR-C - page 148

    Web Client Operation 132 Figure 6-46 Account Managemen t Menu Auto Maintenanc e Here you can select auto reboot and aut o delete old fi le intervals from the dropdown list. See Figure 6-47 . ...

  • Honeywell HD-16DVR-C - page 149

    Honeywell 133 Figure 6-47 Auto Maintenance Menu Abnormity The abnormity interface is sho wn as below. ...

  • Honeywell HD-16DVR-C - page 150

    Web Client Operation 134 Figure 6-48 Abnormity Setup Menu Please refer to the following chart for de tailed information. Parameter Function Event Type Possible abnormal errors incl ude: no disk, disk no space, disk error, net error. You need to draw a circle to enable this funct ion. Alarm Out The correspondin g alarm activation output channel when ...

  • Honeywell HD-16DVR-C - page 151

    Honeywell 135 Here you can set channels for the SPOT (matrix) outp ut and the display interval. See Figure 6-49 . Figure 6-49 Matrix Config Search Click Search , and you can see an interfa ce shown in Figure 6-50 . Please select reco rd playback mode, and then select start time, end time and channel. Then please click the sear ch button, you can se ...

  • Honeywell HD-16DVR-C - page 152

    Web Client Operation 136 Figure 6-50 Record Search Menu Select the files you want to download an d then click Download , and a dialogue box will appear as shown in Figure 6-51 . Then you can sp ecify file name an d path to downloa d the files to your local PC. Figure 6-51 Record Save Menu ...

  • Honeywell HD-16DVR-C - page 153

    Honeywell 137 Now you can see the system begins to download and the Do wnload button changes to the Stop button. You can clic k it to terminate the current operation. At the bottom of the interface, there is a process bar for your reference. See Figure 6-52 . Figure 6-52 Record Search Menu (Sav ing) Whe n the download has completed, you can see a d ...

  • Honeywell HD-16DVR-C - page 154

    Web Client Operation 138 Type Parameter Function Record Search general record , alarm record and motion detection record. Alarm Search alarm record. Motion Detection Search motion detection record. Local Search local record. Snapshot Search snapshot file. Type Card This function is not available with current device. Begin time Set the file start ti ...

  • Honeywell HD-16DVR-C - page 155

    Honeywell 139  Play  Pause  Stop  Slow play  Fast play Figure 6-54 Playback Menu The IP address of playback device and channel number. Playback control bar Alarm Click alarm function, and you can see a n interface as shown in Figure 6-55 . ...

  • Honeywell HD-16DVR-C - page 156

    Web Client Operation 140 Here you can set device alarm type and alarm sound setup. Figure 6-55 Alarm Function Menu Please refer to the following table for det ailed information. Type Pa rameter Function Video loss System alarms when video loss occurs. Motion detect System alarms when motion detection alarm occurs, Disk full System alarms when disk ...

  • Honeywell HD-16DVR-C - page 157

    Honeywell 141 Prompt Automaticall y pops up alarm dialogue box. Sound pop-up System sends out alarm sound when alarm occurs. You can specify as you wish . Sound Path Here yo u can specify alarm so und file path. About Click About , and you can view the cu rrent web client information. See Figure 6-56 . Figure 6-56 Web Client Information Log out Cli ...

  • Honeywell HD-16DVR-C - page 158

    Web Client Operation 142 Figure 6-57 Logout Interface Un-install Web Control You can use web un-install tool “unin stall webrec.bat” in the CD to un-install web control. Note Before un-installation, please cl ose all web pages, otherwise the un-installation might result in error. ...

  • Honeywell HD-16DVR-C - page 159

    Honeywell 143 7 F AQ 1. DVR cannot boot up properly. There are the following possibilities:  Input power is incorrect.  Power connection is inco rrect.  Power switch button is damaged.  Program upgrade is wrong.  HDD malfunction or something is wrong with HDD ribbon.  Front panel error.  Main board is damaged. 2. DVR often auto ...

  • Honeywell HD-16DVR-C - page 160

    FAQ 144 4. There is no video output whether it is one-channel, multiple-chann el or all-channel output. There are the following possibilities:  Program is incompatible. Please upgrade to the latest version.  Brightness is 0. Please restore fact ory default setup.  There is no video input signal or it is too wea k.  Check privacy mask se ...

  • Honeywell HD-16DVR-C - page 161

    Honeywell 145  Program read error, bit data is too small. There i s a mosaic displayed on the full screen. Please rest art the DVR to solve this problem.  HDD data ribbon error.  HDD malfunction.  DVR hardware malfunctio ns. 8. There is no audio when live monitoring. There are the following possibilities:  The audio source is not a p ...

  • Honeywell HD-16DVR-C - page 162

    FAQ 146  PTZ setup is incorrect.  PTZ decoder and DVR protocol is incompatible.  PTZ decoder and DVR address is in compatible.  When there are several decoders, plea se add 120 Ohm (impedance matching) b etween the PTZ decoder A/B cables’ farthest end to delete the reverber ation. Otherwise the PTZ control is not stable.  The dista ...

  • Honeywell HD-16DVR-C - page 163

    Honeywell 147  Network fluency is not good.  Client-end resources are li mited.  There is multiple-cast group setup in DVR. This mo de can result in a mosaic appearance. Usually we do not recommend this mode.  There is privacy mask or channel protection setup.  Current user has no right to monitor.  DVR local video output quality ...

  • Honeywell HD-16DVR-C - page 164

    FAQ 148 18. Alarm signal can not been disarmed. There are the following possibilities:  Alarm setup is incorrect.  Alarm output has been opened man ually.  Input device error or connection i s incorrect.  Some program versions may hav e this problem. Please upgrade your system. 19. Alarm function is null. There are following possibi lit ...

  • Honeywell HD-16DVR-C - page 165

    Honeywell 149 22. Cannot playback the downl oaded file. There are following possibi lities:  There is no media player.  No DirectX 8.1 or higher g raphic ac celeration software is installed. Please install the latest DirectX software.  There is no DivX503Bundle.exe cont rol when you play the file transformed to AVI via media player.  No ...

  • Honeywell HD-16DVR-C - page 166

    Appendix 150 8 Appendix HDD Capacity Calculation Calculate total capacity needed by each DVR according to video recording (video recording type and video file storage time). 1. According to formula (1 ), calculate storage capacity i q that is the capacity of each channel need ed for each hour, unit Mbyte. 1024 3600 8     i i d q (1) In ...

  • Honeywell HD-16DVR-C - page 167

    Honeywell 151    c i i T m q 1 × a% (4) In the formula ： a% means alarm oc currence rate. Compatible USB Drive List Note Please upgrade the DVR firmware to the latest version to ensure the accuracy of the table below. If you use the USB drive, please confirm t he format FAT or FAT32. Manufacturer Model Capacity Sandisk Cruzer Micro 512M ...

  • Honeywell HD-16DVR-C - page 168

    ...

  • Honeywell HD-16DVR-C - page 169

    Honeywell Security Honeywell Security Asia Pacific 35F Tower A, City Center, 100 Zun Yi Road, Shanghai 200051, China TEL +86 21 22196888 FAX +86 21 62370740 Honeywell Security (China) Co., Ltd. Block 28, Section 2 Huai De Cui Gang Industrial Estate Fu Yong, Bao An, Shenzhen, P.R.China TEL +86 0755 27326500 FAX +86 0755 27391736 © 2010 Honeywell In ...

Manufacturer Honeywell Category DVR

Documents that we receive from a manufacturer of a Honeywell HD-16DVR-C can be divided into several groups. They are, among others:
- Honeywell technical drawings
- HD-16DVR-C manuals
- Honeywell product data sheets
- information booklets
- or energy labels Honeywell HD-16DVR-C
All of them are important, but the most important information from the point of view of use of the device are in the user manual Honeywell HD-16DVR-C.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Honeywell HD-16DVR-C, service manual, brief instructions and user manuals Honeywell HD-16DVR-C. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Honeywell HD-16DVR-C.

Similar manuals

A complete manual for the device Honeywell HD-16DVR-C, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Honeywell HD-16DVR-C by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Honeywell HD-16DVR-C.

A complete Honeywell manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Honeywell HD-16DVR-C - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Honeywell HD-16DVR-C, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Honeywell HD-16DVR-C, that we can find in the current document
3. Tips how to use the basic functions of the device Honeywell HD-16DVR-C - which should help us in our first steps of using Honeywell HD-16DVR-C
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Honeywell HD-16DVR-C
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Honeywell HD-16DVR-C in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Honeywell HD-16DVR-C?

Use the form below

If you did not solve your problem by using a manual Honeywell HD-16DVR-C, ask a question using the form below. If a user had a similar problem with Honeywell HD-16DVR-C it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)