Manual Zenoah G240RC

32 pages 0.3 mb
Download

Go to site of 32

Summary
  • Zenoah G240RC - page 1

    OWNER'S MANUAL Thank you for using ZENOAH ENGINE. ● Please read this Owner’s Manual thoroughly before operating and use the engine correctly according to this Owner’s Manual. (For safety reasons, please contact your sales dealer before operating this engine if there is something that you do not understand.) ● This engine has been desig ...

  • Zenoah G240RC - page 2

    2 ...

  • Zenoah G240RC - page 3

    3 SPECIFICATIONS.....................................................4 SAFETY PRECAUTIONS..........................................5 FUEL .........................................................................7 ENGINE STARTING..................................................8 OPERATION ............................................................ ...

  • Zenoah G240RC - page 4

    4 SPECIFICA TIONS Engine Type G240RC G270RC Overall Size (L x W x H) 166 x 205 x 196mm Weight 2.07kg Displacement 22.5cm 3 25.4cm 3 Clutch Engagement 6000rpm (STD Spring) Carburetor Type WT-813A Spark Plug NGK CMR7H Spark Plug Gap 0.65mm Rotating Direction Counter-Clockwise (View From PTO) ...

  • Zenoah G240RC - page 5

    5 SAFETY PRECAUTIONS ● These safety precautions are to prevent you and those people in the vicinity from incurring harm or damage. Make sure to observe these precautions and constantly strive to ensure safety. ● Safe use of the engine is your personal obligation and responsibility. Constantly take care to act with good judgment as you enjoy you ...

  • Zenoah G240RC - page 6

    6 SAFETY PRECAUTIONS overly long sleeves, neckties and the like. Failure to do so could result in injury. • When mounting the engine to a model, make sure to follow the model’s operating manual. If necessary, reinforce the engine mounting unit and the peripheral parts. ...

  • Zenoah G240RC - page 7

    7 FUEL • Mix gasoline (octane over 95) and high grade 2 cycle engine oil (mixing use type; F3C grade or ISO EGC grade) at mixing ratio 25~40:1. • The mixing ratio is according to the oil recommendation. [ NOTE ] 1) Never use any alcohol fuel or alcohol added fuel, or the rubber parts in the carburetor and engine will be damaged. 2) Gasoline is ...

  • Zenoah G240RC - page 8

    8 ENGINE ST ARTING • Push the primer pump several times until overflown fuel flows out. (Fig.1) • Close the choke lever, and move the throttle lever 1/4~1/3 open position. (Fig.1)(Fig.2) • Pull the starter(knob) quickly until first firing noise. (Fig.3) • Open the choke(Fig.2), throttle idle~1/4 open • Pull the starter quickly • Operate ...

  • Zenoah G240RC - page 9

    9 OPERA TION • This engine is already tuned up to get high power and high speed, and needs correct maintenance to keep such high performance. • The details for operation may be described in the separate owners manual to be issued by car manufacturer. • Be sure to have the engine cool down for 30 seconds at idle speed after full throttle runni ...

  • Zenoah G240RC - page 10

    10 MAINTENANCE 1) MAINTENANCE CHART Before Every Every Items Action Use 25 hours 100 hours Note Leakage, Check ✔ Damage/Crack Idling Speed Check/Adjust ✔✔✔ Air-cleaner Check/Cleaning ✔✔ Replace if necessary Spark Plug(gap) Check/Adjust ✔✔ ↑ Cylinder(barrel) Check/Cleaning ✔✔ ↑ Piston, Ring Check/Cleaning ✔✔ ↑ Muffler & ...

  • Zenoah G240RC - page 11

    11 MAINTENANCE 2) SPECIFICATIONS AND TECHNICAL DATA Items Unit G240RC G270RC Remarks Bore x Stroke mm 32 x 28 34 x 28 Displacement cm 3 22.5 25.4 Effective Compression Ratio 8.9 8.9 Type Walbro WT ← Carburetor Venture(mm) ø12.7 ← Starting Recoil Starter ← Type TCI ← Ignition Timing BTC 30°/8000rpm ← Standard CMR7H ← NGK CR8HIX with Te ...

  • Zenoah G240RC - page 12

    12 MAINTENANCE 3) MAINTENANCE SPECIFICATIONS G240RC G270RC Items Standard Limit Standard Limit Measuring Device Remarks Bore (mm) ø32 Plating damaged ø34 Plating damaged Eye Checking Diameter (mm) ø31.97 ø31.87 ø33.97 ø33.87 Micro Meter Piston Ring 0.81 0.91 1.01 1.11 Thickness Gauge Groove width (mm) Piston Pin Hole (mm) ø8.01 ø8.05 ø8.01 ...

  • Zenoah G240RC - page 13

    13 MAINTENANCE 4) CARBURETOR Items Standard Limit Measuring Device Remarks Metering Lever set (mm) 1.65 ± 0.16 Vanier Inlet Valve Opening Pressure (kg/cm 2 ) 1.3~2.3 Leak Tester Inlet Valve Closing Pressure (kg/cm 2 ) 0.7~1.7 Leak Tester 5) IGNITION SYSTEM Items Standard Limit Measuring Device Remarks Spark Plug Air Gap (mm) 0.6~0.7 0.7 Thickness ...

  • Zenoah G240RC - page 14

    14 MAINTENANCE 6) TIGHTENING TORQUE Items Screw Size Standard (N·m) Limit (N·m) Remarks Carburetor M5 (P=0.8) 3.4 2.9~3.9 Insulator M5 (P=0.8) 4.4 3.9~4.9 with Locktight glue Clutch M6 (P=1.0) 6.4 4.9~7.8 Rotor M8 (P=1.0) 12.7 9.8~14.7 Cylinder M5 (P=0.8) 6.8 4.7~8.8 Crankcase M5 (P=0.8) 6.4 4.9~7.8 Spark Plug M10 (P=1.0) 10.8 8.8~12.8 Muffler M5 ...

  • Zenoah G240RC - page 15

    15 SPECIAL TOOLS Part Name Part No. External Appearance Usage 1 Puller Assy 2890-96100 To remove rotor. 2 Piston Stopper 4810-96220 3 Rod Assy 1101-96220 To remove/install piston pin. 4 Air Gap Gauge 3330-97310 To set ignition coil. 5 Hex Wrench 3304-97611 6 Snap Ring Pliers 5500-96110 To remove snap ring. To hold crankshaft when disassembling/asse ...

  • Zenoah G240RC - page 16

    16 SERVICE GUIDE 1) REMOVING CLUTCH SHOE 1. Remove the housing and plug cap. 2. Remove the spark plug and fit the stopper(4810- 96220) into the plug hole. 3. Remove clutch bolts(14mm Hex.). 2) REMOVING ROTOR (FAN) 4. Remove the rotor nut(12mm Hex.). 5. Remove the rotor using the puller assy (2890-96100). Apply 8mm puller bolts. Clutch Bolt (14mm He ...

  • Zenoah G240RC - page 17

    17 SERVICE GUIDE 3) ASSEMBLING ROTOR Insert the gauge(3330-97310) in between the rotor magnet metal and the coil.Tighten screws while pressing the coil against the rotor. Air Gap 0.3 ~ 0.4mm 4) REMOVING PISTON PIN 1. Remove snap rings from both sides of the piston pin. 2. Engage the rod assy(1101-96220) to the piston pin and gently tap with a plast ...

  • Zenoah G240RC - page 18

    18 SERVICE GUIDE 5) INSTALLING PISTON 1. Make sure to point the arrow mark on the piston to the exhaust side. 2. Fit the circlip in the groove so as to face the end gap below. Deformed circlip may come off during engine operation and damage the engine. 6) CARBURETOR ADJUSTMENT The carburetor comes with a standard setting, it is for optimum performa ...

  • Zenoah G240RC - page 19

    19 TROUBLE SHOOTING 1) ENGINE DOES NOT START Description Cause Countermeasure No spark in the spark plug Spark Plug 1. Wet spark plug electrodes Make them dry 2. Carbon deposited on the electrodes Cleaning 3. Insulation failure by insulator damage Exchange 4. Inproper spark gap Adjust to 0.6~0.7mm 5. Burn out of electrodes Exchange Magneto 1. Ignit ...

  • Zenoah G240RC - page 20

    20 TROUBLE SHOOTING 2) LACK OF POWER OR UNSTABLE RUNNING Description Cause Countermeasure Compression is normal 1. Air penetration from fuel pipe joints, etc Secure connection and no misfire 2. Air penetration from intake tube joint or Change gasket or tightening screws carburetor joint 3. Water in fuel Change with good fuel 4. Piston start to seiz ...

  • Zenoah G240RC - page 21

    21 PA R TS LIST ...

  • Zenoah G240RC - page 22

    22 P ARTS LIST G240RC (X374323111) ...

  • Zenoah G240RC - page 23

    23 G240RC (X374323111) ...

  • Zenoah G240RC - page 24

    24 KEY# PART NUMBER DESCRIPTION REMARKS Q'TY/ UNIT KEY# PART NUMBER DESCRIPTION REMARKS Q'TY/ UNIT 35 1140-21162 CASE, CLUTCH 1 36 3350-15250 BOLT 4 M5x16L 37 1140-55310 PLATE 1 38 0224-30614 BOLT 1 M6x14L 39 T2070-71110 ROTOR 1 40 T2070-71200 COIL-A 1 42 T2075-72210 CAP 1 43 1400-72121 SPRING 1 44 5500-72130 GROMMET 1 45 1260-71261 SPACE ...

  • Zenoah G240RC - page 25

    25 KEY# PART NUMBER DESCRIPTION REMARKS Q'TY/ UNIT KEY# PART NUMBER DESCRIPTION REMARKS Q'TY/ UNIT 104 848ER883C0 • VALVE 1 105 1918-82160 • WASHER 1 107 T2070-31111 COVER, FAN 1 108 3310-12281 BOLT 4 M5x20L 109 848ER83111 COVER-A 1 110 1850-32160 SCREW 1 M4x12L 111 1900-31410 SCREW 2 TP4.5x18L 112 3699-91867 SPARKPLUG NGK CMR7H 1 113 ...

  • Zenoah G240RC - page 26

    26 P ARTS LIST G270RC (X374326111) ...

  • Zenoah G240RC - page 27

    27 G270RC (X374326111) ...

  • Zenoah G240RC - page 28

    28 KEY# PART NUMBER DESCRIPTION REMARKS Q'TY/ UNIT KEY# PART NUMBER DESCRIPTION REMARKS Q'TY/ UNIT 35 1140-21162 CASE, CLUTCH 1 36 3350-15250 BOLT 4 M5x16L 37 1140-55310 PLATE 1 38 0224-30614 BOLT 1 M6x14L 39 T2070-71110 ROTOR 1 40 T2070-71200 COIL-A 1 42 T2075-72210 CAP 1 43 1400-72121 SPRING 1 44 5500-72130 GROMMET 1 45 1260-71261 SPACE ...

  • Zenoah G240RC - page 29

    29 KEY# PART NUMBER DESCRIPTION REMARKS Q'TY/ UNIT KEY# PART NUMBER DESCRIPTION REMARKS Q'TY/ UNIT 104 848ER883C0 • VALVE 1 105 1918-82160 • WASHER 1 107 T2070-31111 COVER, FAN 1 108 3310-12281 BOLT 4 M5x20L 109 T2070-32100 COVER-A 1 110 1850-32160 SCREW 1 M4x12L 111 1900-31410 SCREW 2 TP4.5x18L 112 3699-91867 SPARKPLUG NGK CMR7H 1 11 ...

  • Zenoah G240RC - page 30

    30 W ARRANTY WARRANTY TERMS 1) Scope of Application This engine manufactured by Husqvarna Zenoah Co., Ltd. (herein after “Zenoah”). And sold to the user directly or through distributor/manufacturer, shall entitle to be covered by this warranty. 2) Limits of Warranty Zenoah warrants that; 1. The quality disclosed in the specifications. 2. The en ...

  • Zenoah G240RC - page 31

    31 W ARRANTY 4) Term of Warranty Three (3) months after purchased by end- user subject to 12 months from produced month. 5) Exempt from Warranty Zenoah shall not warrant this engine even if the fault has been caused during the period of terms of Warranty, in case that. 1. Any faults, failures caused from neglect of proper operation and maintenance ...

  • Zenoah G240RC - page 32

    Head Office : 1-9 Minamidai, Kawagoe-city, Saitama, 350-1165 Japan Phone: (+81)49-243-1115 Fax: (+81)49-243-7197 ...

Manufacturer Zenoah Category Automobile Parts

Documents that we receive from a manufacturer of a Zenoah G240RC can be divided into several groups. They are, among others:
- Zenoah technical drawings
- G240RC manuals
- Zenoah product data sheets
- information booklets
- or energy labels Zenoah G240RC
All of them are important, but the most important information from the point of view of use of the device are in the user manual Zenoah G240RC.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Zenoah G240RC, service manual, brief instructions and user manuals Zenoah G240RC. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Zenoah G240RC.

Similar manuals

A complete manual for the device Zenoah G240RC, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Zenoah G240RC by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Zenoah G240RC.

A complete Zenoah manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Zenoah G240RC - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Zenoah G240RC, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Zenoah G240RC, that we can find in the current document
3. Tips how to use the basic functions of the device Zenoah G240RC - which should help us in our first steps of using Zenoah G240RC
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Zenoah G240RC
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Zenoah G240RC in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Zenoah G240RC?

Use the form below

If you did not solve your problem by using a manual Zenoah G240RC, ask a question using the form below. If a user had a similar problem with Zenoah G240RC it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)