Manual Hobart 4246

8 pages 0.73 mb
Download

Go to site of 8

Summary
  • Hobart 4246 - page 1

    701 S. RIDGE AVENUE TROY, OHIO 45374-0001 937 332-3000 www.hobartcorp.com FORM 34821 (Aug. 2002) MODEL 4246 MIXER-GRINDER 4246S STANDARD (5 HP/1 HP) ML-134216 4246HD HEAVY DUTY (7.5 HP/1 HP) ML-134214 ...

  • Hobart 4246 - page 2

    – 2 – ...

  • Hobart 4246 - page 3

    – 3 – Operation and Care of the MODEL 4246 MIXER-GRINDER SA VE THESE INSTRUCTIONS GENERAL The Model 4246 Mixer-Grinder is designed to use #32-size knife and plate assemblies (not included with the unit). The Model 4246 is equipped with two drive systems. A 1-HP motor drives the heavy-duty steel mixing arm. A 5-HP motor drives the grinder worm i ...

  • Hobart 4246 - page 4

    – 4 – INST ALLA TION UNPACKING Immediately after unpacking the mixer-grinder, check for possible shipping damage, If the mixer- grinder is found to be damaged, save the packaging material and contact the carrier within 15 days of delivery. Remove the packing box by loosening and removing the four bolts through the wooden skid. To set up the uni ...

  • Hobart 4246 - page 5

    – 5 – PNEUMATIC FOOT SWITCH To install the pneumatic foot switch: 1 . Remove screws from the lower front panel. PL-41742 PL-41743 Fig. 2 Fig. 3 2 . On the front of the machine, locate the lower frame rail; approximately 4" (10.2 cm) from the left side, is a knockout hole for the foot switch control hose. Using a hammer and punch (Fig. 2), ...

  • Hobart 4246 - page 6

    – 6 – CHECK MOTOR ROTATION With the grinder cylinder in place and the hopper lid closed, check the rotation. Standing in front of machine, push the MIX/GRIND START button. Check that the mixing arm and worm rotate counterclockwise; press the STOP button to stop rotation. If the mixing arm and worm do not rotate counterclockwise, correct the rot ...

  • Hobart 4246 - page 7

    – 7 – ASSEMBLY AND USE Do not use a plate with hole size smaller than 3 / 32 ". Before using the grinding cylinder, take it apart and wash it thoroughly. (See Cleaning instructions.) Hand-tighten the end ring. Overtightening will damage unit. The Wedge cylinder is marked TOP and BOTTOM. Before operating, be sure TOP is visible. The knife a ...

  • Hobart 4246 - page 8

    – 8 – 3 . Loosen the two retaining nuts, and remove the mixing arm pilot bushing assembly. Rotate and remove the bushing retainer. Disengage and pull mixing arm from the square drive and lift the arm from the hopper. 4 . Wash machine with hot water or steam. When using detergents and sanitizers, follow manufacturer's instructions. Rinse wi ...

Manufacturer Hobart Category Food Processor

Documents that we receive from a manufacturer of a Hobart 4246 can be divided into several groups. They are, among others:
- Hobart technical drawings
- 4246 manuals
- Hobart product data sheets
- information booklets
- or energy labels Hobart 4246
All of them are important, but the most important information from the point of view of use of the device are in the user manual Hobart 4246.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Hobart 4246, service manual, brief instructions and user manuals Hobart 4246. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Hobart 4246.

Similar manuals

A complete manual for the device Hobart 4246, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Hobart 4246 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Hobart 4246.

A complete Hobart manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Hobart 4246 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Hobart 4246, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Hobart 4246, that we can find in the current document
3. Tips how to use the basic functions of the device Hobart 4246 - which should help us in our first steps of using Hobart 4246
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Hobart 4246
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Hobart 4246 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Hobart 4246?

Use the form below

If you did not solve your problem by using a manual Hobart 4246, ask a question using the form below. If a user had a similar problem with Hobart 4246 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)