Manual Cisco Systems 15454-FTF2

828 pages 19.19 mb
Download

Go to site of 828

Summary
  • Cisco Systems 15454-FTF2 - page 1

    Americas Hea dquarters Cisc o Syst ems , Inc . 170 West Ta sman Driv e San Jos e, CA 95 134-1706 USA http://www.ci sco.com Tel: 408 526-4000 800 553- NETS (638 7) Fax: 408 527-0883 Cisco ONS 1 5454 Reference Manual Pr oduct and Docume ntation Re lease 8.5.x July 20 1 0 Text Pa rt Nu mber: 78-18 106-0 1 ...

  • Cisco Systems 15454-FTF2 - page 2

    THE SPECIFICATIONS AND INFORMATION REGARDING TH E PRODUCTS IN THIS MANUAL ARE SUBJE CT TO CHANGE WITHOUT NO TICE. ALL STATEMENT S, INFORMATI ON, AND RE COMMENDATIONS IN T HIS MA NUAL ARE BELI EVED TO BE ACCURATE BUT ARE P RESENTED WITHOUT WARRANTY OF ANY KIND, EXPRE SS OR IMPLIED. USERS MUST TA KE FULL RESPONSIBILITY FOR THEIR AP PLICATION OF ANY P ...

  • Cisco Systems 15454-FTF2 - page 3

    iii Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 CONTENTS About t his Manual xli Revisi on Hist ory xli Docume nt Obje ctiv es xliv Audienc e xl v Relat ed D ocum ent atio n xlv Document Conv entions xlv Obtai ning Opti cal Net worki ng I nfo rmatio n li Where t o Fi nd Safe ty a nd War ning I nformati on li Cisco Opt ical Net workin g Pr ...

  • Cisco Systems 15454-FTF2 - page 4

    Cont ent s iv Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 1.5. 6 SMB EIA 1-28 1.5. 7 AMP Champ EIA 1-29 1.5. 8 UB IC-V E IA 1-32 1.5. 9 UBIC-H EIA 1-34 1.5. 10 EIA Replacement 1-38 1.6 Coax ial Ca ble 1-38 1.7 DS-1 Cable 1-38 1.7. 1 Tw isted Pa ir Wi re-W rap Ca bles 1-38 1.7. 2 Electric al In terf ace Adapter s 1-3 9 1.8 UBIC-V Ca bles 1 ...

  • Cisco Systems 15454-FTF2 - page 5

    Content s v Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 CHAPTER 2 Common C ontrol Card s 2-1 2.1 Common Con trol Card Over view 2-1 2.1. 1 Cards Summar y 2-1 2.1. 2 Car d Comp ati bility 2-3 2.1. 3 Cross-C onnect Car d Compatib ili ty 2-3 2.2 TCC2 Car d 2-6 2.2. 1 TCC2 Card Fu nctiona lit y 2-7 2.2. 2 TCC 2 Ca rd-L evel I ndic ators 2-8 ...

  • Cisco Systems 15454-FTF2 - page 6

    Cont ent s vi Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 2.7. 6 Data Communi cations Channel 2-33 CHAPTER 3 Electri cal Cards 3-1 3.1 Elec trical Card Over view 3-1 3.1. 1 Card Summary 3-1 3.1. 2 Car d Comp atibil ity 3-3 3.2 Bit Er ror Rate Testin g 3-4 3.3 EC1- 12 Ca rd 3-5 3.3. 1 EC1-12 Sl ots and Conn ector s 3-5 3.3. 2 EC1-12 Fa cep ...

  • Cisco Systems 15454-FTF2 - page 7

    Content s vii Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 3.9 DS3-12 E and DS3N-12 E Cards 3-21 3.9. 1 DS3-12E and DS3N- 12E Slo ts and Conne ctor s 3-22 3.9. 2 DS 3-1 2E F acepl ate and Blo ck D iag ram 3-22 3.9. 3 DS3-12E and DS3N- 12E Car d-Level Indicat ors 3-24 3.9. 4 DS3-12E and DS3N- 12E Por t-Le vel Indi cators 3-25 3.10 DS3XM-6 ...

  • Cisco Systems 15454-FTF2 - page 8

    Cont ent s viii Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 4.6 OC12 LR/ STM4 LH 1550 Card 4-13 4.6. 1 OC12 LR/STM4 LH 1550 Card -Level I ndic ators 4-14 4.6. 2 OC12 LR/S TM4 LH 1 550 P ort- Level I ndicat ors 4-15 4.7 OC12 IR/S TM4 SH 131 0-4 Ca rd 4-15 4.7. 1 OC 12 IR/ STM 4 SH 13 10-4 Ca rd- Lev el Indi cato rs 4-17 4.7. 2 OC12 IR /STM ...

  • Cisco Systems 15454-FTF2 - page 9

    Content s ix Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 4.18.2 Ports and Li ne Rate s 4-43 4.18.3 15454_MRC-12 Card -Level Ind icators 4-45 4.18.4 15454_MRC-12 Port- Level Indi cator s 4-46 4.19 MRC-2.5G-4 Mul tirat e Card 4-46 4.19.1 Slot Compatib ili ty by Cross- Conne ct Card 4-48 4.19.2 Ports and Li ne Rate s 4-48 4.19.3 MRC-2.5G-4 ...

  • Cisco Systems 15454-FTF2 - page 10

    Cont ent s x Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 5.5. 2 E1000-2 -G Port-L evel I ndicato rs 5-13 5.5. 3 Cross-Conn ect Compa tibilit y 5-13 5.6 G1000- 4 Card 5-14 5.6. 1 STS-24c Re strict ion 5-15 5.6. 2 G1000-4 Ca rd-Level Indica tors 5-15 5.6. 3 G1000-4 Po rt-Leve l Ind icators 5-15 5.6. 4 Slo t Comp atib ility 5-16 5.7 G1K-4 Ca ...

  • Cisco Systems 15454-FTF2 - page 11

    Content s xi Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 5.14.3 Cross-Con nect and Sl ot Compat ibili ty 5-36 5.15 Ethe rne t Car d GBI Cs and SF Ps 5-36 5.15.1 Co mpa tibil ity by Car d 5-37 5.15.2 GBIC Descript ion 5-38 5.15.3 G1K-4 DWDM and CWDM GBICs 5-39 5.15.4 SF P De scri ptio n 5-41 CHAPTER 6 Storage Acce ss Networking Car ds 6-1 ...

  • Cisco Systems 15454-FTF2 - page 12

    Cont ent s xii Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 7.3. 1 1+1 Prote ction 7-13 7.3. 2 Optimized 1+ 1 Prot ection 7-1 3 7.4 Unpr otec ted Card s 7-14 7.5 Exter nal Switc hin g Com man ds 7-14 CHAPTER 8 Cisco T ranspor t Contr oller Op erati on 8-1 8.1 CTC Soft ware Deliv ery Meth ods 8-1 8.1. 1 CTC Softwar e I nstall ed on t he T C ...

  • Cisco Systems 15454-FTF2 - page 13

    Content s xiii Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 9.2. 2.2 Idle U ser T imeo ut 9-7 9.2. 2.3 User Passwo rd, Lo gin, and Ac cess Po licies 9-7 9.2. 2.4 Secure Acc ess 9-8 9.3 Audit Tr ail 9-8 9.3. 1 Audit Trai l Log Ent ries 9-8 9.3. 2 Au dit T rail Ca paci ties 9-9 9.4 RADIUS Secur ity 9-9 9.4. 1 RADIUS Authentic ation 9-9 9.4. ...

  • Cisco Systems 15454-FTF2 - page 14

    Cont ent s xiv Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 11.11 BLSR STS and VT Squel ch Tabl es 11-22 11.11. 1 BLSR STS Squ elch Tabl e 11-22 11.11. 2 BLSR VT Squ elch Ta ble 11-23 11.12 IEEE 802.17 Re silien t Packe t Ring Circuit Display 11- 23 11.13 Section and Pa th Trac e 11-2 4 11.14 Path Signal Label, C2 Byt e 11 -25 11.15 Au tom ...

  • Cisco Systems 15454-FTF2 - page 15

    Content s xv Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 12.2.4 BLS R A ppl icatio n Ex am ple 12-10 12.2.5 BLSR Fiber Co nnect ions 12 -13 12.3 Path Prot ecti on 12-14 12.4 Dual-R ing In terco nnect 12-19 12.4.1 BLSR DRI 12-19 12.4.2 Path Pr otec tion DRI 12-23 12.4.3 Path Prote ctio n/BLSR DRI Handoff Co nfig uration s 12-2 6 12.5 Comp ...

  • Cisco Systems 15454-FTF2 - page 16

    Cont ent s xvi Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 13.4 Exter nal Fir ew alls 13-25 13.5 Open GNE 13-27 13.6 TCP/IP and OSI Net working 13-2 9 13.6.1 Poin t-to -Po int Pr otoc ol 13-30 13.6.2 Li nk Ac ces s Pr otoc ol on the D C hann el 13-31 13.6.3 OSI Co nnectio nless Network Serv ice 13-31 13.6.4 OSI Routing 13-34 13.6.4 .1 End ...

  • Cisco Systems 15454-FTF2 - page 17

    Content s xvii Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 14.3 Alarm In formati on 14-2 14.3.1 Viewing Ala rms With Each Node’s Time Zo ne 14-4 14.3.2 Controll ing Alar m Displa y 14-4 14.3.3 Fi lterin g Al arms 14-4 14.3.4 Vi ewin g Al arm-A ffe cte d Ci rcui ts 14-5 14.3.5 Condit ions Tab 14-5 14.3.6 Controll ing t he Conditi ons Di ...

  • Cisco Systems 15454-FTF2 - page 18

    Cont ent s xviii Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 15.5.3 .1 D S-1 Facili ty D ata Link Perf orm ance Moni tori ng 15-18 15.5.4 DS3 -12 and D S3 N-12 Car d Pe rfor manc e Mo nito ring Pa ramet ers 15-18 15.5.5 DS3-12E and DS3 N-12E Ca rd Perf ormance Moni tori ng Paramet ers 15- 19 15.5.6 DS3i-N-12 Ca rd Perfor mance Moni torin ...

  • Cisco Systems 15454-FTF2 - page 19

    Content s xix Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 16.3 SNMP E xter nal In terf ace R equiremen t 16- 4 16.4 SNMP V ersion Suppo rt 16-4 16.5 SNMP Mes sage Ty pes 16-4 16.6 SNMP Manag ement Info rmati on Bases 16-5 16.6.1 IETF-Sta ndard MIBs for t he ONS 1545 4 16-5 16.6.2 Pr opri eta ry ON S 15454 MIBs 16-6 16.6.3 Generic Thr esh ...

  • Cisco Systems 15454-FTF2 - page 20

    Cont ent s xx Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 APPENDI X A Hardware Speci ficati ons A-1 A.1 Shelf Spec ificat ions A-1 A.1.1 Ban dwidth A-1 A.1.2 Con figurat ions A-2 A.1.3 Cisco Tran spo rt Co ntrolle r A-2 A.1.4 External LA N Inte rfa ce A-2 A.1.5 TL1 Craf t Interf ace A-2 A.1.6 Modem In terf ace A-2 A.1.7 Ala rm Interf ace ...

  • Cisco Systems 15454-FTF2 - page 21

    Content s xxi Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 A.6 Optica l Card Specif ica tions A-27 A.6.1 OC3 I R 4/STM1 SH 13 10 Card Speci fic ations A-28 A.6.2 OC3 I R/STM1SH 13 10-8 Ca rd Specif icat ions A-29 A.6.3 OC12 IR/ STM4 SH 13 10 Ca rd S pecif icatio ns A-30 A.6.4 OC12 LR/STM4 LH 13 10 Card Specif icatio ns A-31 A.6.5 OC12 LR/ ...

  • Cisco Systems 15454-FTF2 - page 22

    Cont ent s xxii Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 B.3 Servi ce S tate Tr ansi tions B- 3 B.3.1 Car d Servi ce State Transi tions B-3 B.3.2 Po rt and Cr oss-C onnect Ser vice State Tran sition s B-5 B.3.3 Plugga ble Eq uip ment S ervi ce Sta te Tr ansi tion s B-10 APPENDI X C Network Element Defaul ts C-1 C.1 Netw ork Elemen t De ...

  • Cisco Systems 15454-FTF2 - page 23

    FIG U R ES xxiii Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Figu re 1-1 Cisco ONS 15454 ANSI Dimens ions 1-4 Figu re 1-2 Mounting an ONS 15 454 in a Rack 1-5 Figu re 1-3 The ONS 15454 Fro nt Door 1-7 Figu re 1-4 Cisco ONS 15454 Deep Door 1-8 Figu re 1-5 ONS 15454 Front Door Gro und Strap 1-9 Figu re 1-6 Rem ov ing th e ONS 15 454 Front ...

  • Cisco Systems 15454-FTF2 - page 24

    Figures xxiv Cisco ONS 154 54 Referenc e Manual, R8. 5.x 78-18106-01 Figu re 1-31 Crossov er C able 1- 53 Figu re 1-32 Managing Cables on the Fr ont Panel 1-54 Figu re 1-33 Fiber C apa city 1-54 Figu re 1-34 Tie-D own Bar 1-55 Figu re 1-35 AEP P rint ed C irc uit Bo ard Ass embl y 1-57 Figu re 1-36 AEP Block Diagram 1-57 Figu re 1-37 AEP Wir e-Wrap ...

  • Cisco Systems 15454-FTF2 - page 25

    Figures xxv Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Figu re 3-12 DS3X M-12 Fac epl ate and Block Di agra m 3-31 Figu re 4-1 OC3 IR 4/ST M1 SH 1310 Fac eplate an d Block Diagra m 4-6 Figu re 4-2 OC3IR/STM1 SH 131 0-8 Fac eplate an d Block Diagram 4-8 Figu re 4-3 OC12 IR/STM4 SH 131 0 Facep late and Bl ock Dia gram 4-10 Figu re 4-4 OC1 ...

  • Cisco Systems 15454-FTF2 - page 26

    Figures xxvi Cisco ONS 154 54 Referenc e Manual, R8. 5.x 78-18106-01 Figu re 5-7 ML100T-12 Fac epla te and Block Diagr am 5-20 Figu re 5-8 ML100X-8 Facepl ate and Blo ck Di agram 5- 22 Figu re 5-9 ML1000-2 F acepl ate and Blo ck Di agram 5-24 Figu re 5-10 ML-MR -10 Fac epl ate and B lock Di agra m 5-26 Figu re 5-11 CE-1 00T-8 F acepl ate and Blo ck ...

  • Cisco Systems 15454-FTF2 - page 27

    Figures xxvii Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Figu re 11-4 Two VT1. 5 Circui ts in a BLSR 11-1 4 Figu re 11-5 Tradit iona l DCC Tunn el 11-17 Figu re 11-6 VT1.5 Moni tor Cir cuit Re ceived at an EC1-1 2 Port 11-19 Figu re 11-7 Editin g Pa th Prot ecti on Se lect ors 11-2 0 Figu re 11-8 Path Pr otec tion Go-a nd- Retur n Rou t ...

  • Cisco Systems 15454-FTF2 - page 28

    Figures xxvii i Cisco ONS 154 54 Referenc e Manual, R8. 5.x 78-18106-01 Figu re 12-16 Layout of Node ID 0 i n the OC-3 Pat h Prot ection Ex ample in Fi gure 12 -15 12-18 Figu re 12-17 Layout of Node IDs 1 to 3 in the OC- 3 Path Prot ecti on Example i n Figure 12-1 5 12-18 Figu re 12-18 ONS 1545 4 Traditi onal BLSR Dual-R ing In terco nnect (Sa me-S ...

  • Cisco Systems 15454-FTF2 - page 29

    Figures xxix Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Figu re 13-16 IP Scena rio 9: ONS 15454 GNE an d ENEs on the Sa me Subnet with Secure Mode Enabl ed 13-22 Figu re 13-17 IP Scena rio 9: ONS 15454 GNE an d ENEs on Diff erent Sub nets wi th Secure Mode Enabl ed 13-2 3 Figu re 13-18 Proxy an d Fire wall Tu nnels for Forei gn Termina ...

  • Cisco Systems 15454-FTF2 - page 30

    Figures xxx Cisco ONS 154 54 Referenc e Manual, R8. 5.x 78-18106-01 Figu re 15-8 Monitor ed Signal Types fo r the DS3-1 2 and DS3N- 12 Cards 15-18 Figu re 15-9 PM Read Po ints on the DS3-12 an d DS3N-12 Cards 15 -19 Figu re 15-10 Monitor ed Signal Types fo r the DS3-1 2E and DS3N- 12E Cards 15-20 Figu re 15-11 PM Read Po ints on the DS3-12E and DS3 ...

  • Cisco Systems 15454-FTF2 - page 31

    TABLES xxxi Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Ta b l e 1-1 EIA Ty pes Compa tible with t he 15454 -SA-ANSI Onl y 1-16 Ta b l e 1-2 EIA Co nfigu ration s Compatibl e with the 15454-SA-A NSI and th e 15454 -SA-HD 1-1 7 Ta b l e 1-3 Mini BNC Protect ion Ty pes and Slot s 1-22 Ta b l e 1-4 J -Labeli ng Port Ass ignme nts for a Sh e ...

  • Cisco Systems 15454-FTF2 - page 32

    Tables xxxii Cisco ONS 154 54 Referenc e Manual, R8. 5.x 78-18106-01 Ta b l e 1-31 Craf t Int erface Pi n Assignmen ts 1-71 Ta b l e 1-32 Slot and Car d Symbols 1-73 Ta b l e 1-33 Ca rd Por ts, Line R ates, and Conne ctors 1-73 Ta b l e 1-34 ONS 15454 Softwa re and Hardwa re Compat ibility —XC and XCVT Con figura tions 1-76 Ta b l e 1-35 ONS 1545 ...

  • Cisco Systems 15454-FTF2 - page 33

    Tables xxxii i Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Ta b l e 3-9 DS 3/EC1-48 Slot Restr iction s 3-16 Ta b l e 3-10 DS 3/EC1-48 Card -Leve l Indi cato rs 3-19 Ta b l e 3-11 DS 3i-N-12 Ca rd-Le vel Indi cato rs 3-21 Ta b l e 3-12 DS 3-12E and DS3 N-12E Car d-Le vel Indi cators 3-24 Ta b l e 3-13 DS 3XM-6 Car d-Lev el Ind icators 3- ...

  • Cisco Systems 15454-FTF2 - page 34

    Tables xxxiv Cisco ONS 154 54 Referenc e Manual, R8. 5.x 78-18106-01 Ta b l e 5-1 E thernet Cards fo r the ONS 15 454 5-2 Ta b l e 5-2 E thernet Card Sof tware Comp atib ility 5-3 Ta b l e 5-3 E 100T-12 Car d-Le vel Indi cator s 5-6 Ta b l e 5-4 E 100T-12 Po rt-L evel Indi cato rs 5-6 Ta b l e 5-5 E 100T-G Ca rd-L evel Indic ators 5-8 Ta b l e 5-6 ...

  • Cisco Systems 15454-FTF2 - page 35

    Tables xxxv Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Ta b l e 7-2 Su pported 1:N Protec tion b y Electri cal Card 7-3 Ta b l e 7-3 EIA Conn ecto rs Pe r Side 7-5 Ta b l e 7-4 Ele ctrical Card Pr otecti on By EIA Type 7-6 Ta b l e 8-1 J RE Compat ibili ty 8-5 Ta b l e 8-2 Comput er Requ irement s for CTC 8-5 Ta b l e 8-3 ONS 15454 Conn ...

  • Cisco Systems 15454-FTF2 - page 36

    Tables xxxvi Cisco ONS 154 54 Referenc e Manual, R8. 5.x 78-18106-01 Ta b l e 11-12 Bidi rect ional ST S/VT/R egula r Multica rd Ethe rSwit ch/Poin t-to -Poi nt (Stra ight) Etherne t Circ uits 11-31 Ta b l e 11-13 Un idirec tion al STS/ VT Ci rcuit 11- 32 Ta b l e 11-14 Mult icar d Group Ether net Sh ared Pac ket Ring Ci rcuit 11-32 Ta b l e 11-15 ...

  • Cisco Systems 15454-FTF2 - page 37

    Tables xxxvi i Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Ta b l e 14-5 Conditi ons C olumn Desc rip tion 14-6 Ta b l e 14-6 Hist ory Col umn Descri ptio n 14-8 Ta b l e 14-7 Alarm Pr ofile Bu tton s 14 -11 Ta b l e 14-8 Alarm Prof ile Ed iting Op tions 14-12 Ta b l e 15-1 Ele ctrical Cards that Repor t RX and TX Dire ctio n for TCAs 15 ...

  • Cisco Systems 15454-FTF2 - page 38

    Tables xxxviii Cisco ONS 154 54 Referenc e Manual, R8. 5.x 78-18106-01 Ta b l e 16-2 IET F Standa rd MIBs Impl emente d in the ONS 1 5454 Sys tem 16-5 Ta b l e 16-3 ONS 1 5454 Propr ieta ry MIBs 16-6 Ta b l e 16-4 c erentGen ericP mThreshol dTab le 16-7 Ta b l e 16-5 32-Bit c ere ntGen eri cPm Stats Cur rentT able 16-8 Ta b l e 16-6 32-Bit c ere nt ...

  • Cisco Systems 15454-FTF2 - page 39

    Tables xxxix Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Ta b l e C-17 OC-192 Card De fault S ett ings C-5 4 Ta b l e C-18 OC 192-XFP Def ault Sett ings C-59 Ta b l e C-19 MRC- 12 C ard D efault Sett ings C-65 Ta b l e C-20 MRC-2. 5G-4 Card De faul t Setting s C-82 Ta b l e C-21 Node D efaul t Se ttin gs C- 10 1 Ta b l e C-22 Time Zon es ...

  • Cisco Systems 15454-FTF2 - page 40

    Tables xl Cisco ONS 154 54 Referenc e Manual, R8. 5.x 78-18106-01 ...

  • Cisco Systems 15454-FTF2 - page 41

    xli Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 About this Manual Note Th e terms "Unidire ctiona l Path Switched Ri ng" and " UPSR" may appear in Ci sco liter ature. These t erms do not refer t o using Cisc o ONS 15xxx prod ucts in a unid irecti onal path sw itched ring configuratio n. Rather , these terms, as well a ...

  • Cisco Systems 15454-FTF2 - page 42

    xlii Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 About this Manual November 2 007 Updated 1+1 Protectio n sec tion in Card Protec tion chap ter . Updat ed Shel f Configuratio ns secti on in Elect rical Cards ch apter . Januar y 2008 Updated cabling deta ils for ONS- SE-ZE-E L SFP . February 20 08 • Remov ed t he line statin g support fo ...

  • Cisco Systems 15454-FTF2 - page 43

    xliii Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 About thi s Manua l July 2 008 • Updated the 15454_ MRC-12 Port-Le vel Indicators sectio n, in the Optical Cards ch apt er to sh ow the corr ect n umber and stat us of the Rx in dicat or . • Updated the MRC- 2.5G-4 Port -Lev el Indi cators se ction, in the Opt ical C ards chap ter t o ...

  • Cisco Systems 15454-FTF2 - page 44

    xliv Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 About this Manual Document Objectives This m anual provides r eferen ce in formatio n for the C isco O NS 15454 . June 2 009 • Updated t he Figu re AE P W ire-Wra p Conn ections to B ackplane Pi ns in Chapter 1, Shelf and B ackplane Har dw are. • Updated the 1.1 7.1 Card Slot Requiremen ...

  • Cisco Systems 15454-FTF2 - page 45

    xlv Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 About thi s Manua l Audience T o use this public ation , you should be familiar with Cisco or equivalent optical tr ansmission hardware and cabling, tel ecommu nicat ions ha rdware and c abling, elec tron ic cir cuitr y and wiring pra ctices, and pref erab ly have experien ce as a te leco m ...

  • Cisco Systems 15454-FTF2 - page 46

    xlvi Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 About this Manual Note Means r eader ta ke no te . No tes contain helpf ul suggestions or referen ces to material not co ver ed in the documen t. Cautio n Means re a d e r b e c a re fu l . In this situa tion, the u ser mig ht do somethin g that co uld result in equip ment dam age or loss o ...

  • Cisco Systems 15454-FTF2 - page 47

    xlvii Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 About thi s Manua l Atten tion IMPORTANTES IN FORMA TIONS DE S ÉCURI TÉ Ce symbole d'avertissement indique un dan ger . V ous vous trouvez dans une situation pouvant entraîner des bl essures ou des dommages corporels. Avant de travailler s ur un équipement, soy ez conscient des d ...

  • Cisco Systems 15454-FTF2 - page 48

    xlvi ii Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 About this Manual ¡Advertenc ia! INSTRU CCIONES IMPO RT ANTES DE S EGURIDAD Este símbolo de aviso indica peligro. Existe riesgo para su integridad física. Antes de manipular cualquier equipo, considere los ries gos de la corriente eléctrica y fami liarícese con los procedimientos es ...

  • Cisco Systems 15454-FTF2 - page 49

    xlix Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 About thi s Manua l Avi s o INSTR UÇÕES IM PORT ANTES DE SEG URAN ÇA Este símbolo de aviso signi fica perigo. Você se encontra em uma situação em que há risco de lesões corporais. Antes de trabalhar com qualquer equipamento, esteja ciente dos ris cos que envolvem os circuitos elé ...

  • Cisco Systems 15454-FTF2 - page 50

    l Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 About this Manual ...

  • Cisco Systems 15454-FTF2 - page 51

    li Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 About thi s Manua l Obtaining Optical Ne tworki ng Information This sec tion con tains info rmation tha t is specif ic to optical networ king produ cts. F or info rmation that pertain s to all o f Cisco, refer t o the Obtaining Documentatio n and Submitting a Se rvice Reque st sectio n. Wher ...

  • Cisco Systems 15454-FTF2 - page 52

    lii Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 About this Manual Obtaining Do cumentation an d Submitting a Service Reque st For informat ion on obtai ning docu menta tion, sub mittin g a service re quest, an d gathering additiona l inform ation, see t he monthl y What’s New in Cisco Product Docu mentation , which also lists all ne w a ...

  • Cisco Systems 15454-FTF2 - page 53

    CH A P T E R 1-1 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 1 Shelf and Backpla ne Hardware Note Th e terms "Unidire ctiona l Path Switched Ri ng" and " UPSR" may appear in Ci sco liter ature. These t erms do not refer t o using Cisc o ONS 15xxx prod ucts in a unid irecti onal path sw itched ring configuratio n. Rat ...

  • Cisco Systems 15454-FTF2 - page 54

    1-2 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapt er 1 Shelf an d Backpl ane Hard ware 1.1 Overvi ew Cautio n Unused c ard slots sh ould be f i lled with a detecta ble f iller card (Ci sco P/N 1 5454-FILLER) o r a non-detectable filler card (Cisco P/N 15454-BLANK). The f iller card ensures proper airflow when operati ng the ONS 15454 ...

  • Cisco Systems 15454-FTF2 - page 55

    1-3 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 Shelf and Ba ckplane H ardware 1.2 Rack Installation • United States: Nati onal Fire Protection Association (NFP A) 70; United States National Electr ical Code • Canada: Canadia n Elec trical Code, Part I, CSA C22.1 • Othe r coun tries: If local an d nat ional elect rical c ...

  • Cisco Systems 15454-FTF2 - page 56

    1-4 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapt er 1 Shelf an d Backpl ane Hard ware 1.2.1 Reversibl e Mounti ng Bracket Figur e 1 -1 Cisco ONS 15454 ANSI Dimen sions 1.2.1 Reversible Moun ting Bracket Cautio n Use onl y the fasteni ng hard ware pr ovided with t he ON S 15454 to prevent loo senin g, det eriorat ion, a nd elect romec ...

  • Cisco Systems 15454-FTF2 - page 57

    1-5 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 Shelf and Ba ckplane H ardware 1.2.2 Mo unting a S ingle No de Cautio n When mo unting the O NS 1 5454 in a f rame w ith a noncon ductive coatin g (s uch as paint, lacque r , or enam el) ei ther use th e thre ad-fo rming sc rews provid ed with the ONS 15 454 shi ppin g kit, or re ...

  • Cisco Systems 15454-FTF2 - page 58

    1-6 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapt er 1 Shelf an d Backpl ane Hard ware 1.2.3 Mounti ng Multip le Nodes 1.2.3 Mounting Multiple Nodes Most sta ndard (T elco rdia G R-63- CORE, 19-inch [482 .6 mm ] or 23-inc h [58 4.2 m m]) seven-foot (2,133 mm) racks c an hold four ON S 15454 sh elves and a fuse an d alar m panel . Howe ...

  • Cisco Systems 15454-FTF2 - page 59

    1-7 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 Shelf and Ba ckplane H ardware 1.3 Front Door Figur e 1 -3 The O NS 15454 Fr ont Door The ON S 1545 4 ship s with a stan dard door bu t can also accomm odate a de ep do or a n d e xt end e d f ib e r cl ip s (154 54-DOOR- KIT) t o p r o v i d e ad d itional room for cabling ( Fig ...

  • Cisco Systems 15454-FTF2 - page 60

    1-8 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapt er 1 Shelf an d Backpl ane Hard ware 1.3 Front Door Figur e 1 -4 Cisco ONS 15454 Deep D oor . The ONS 15 454 door loc ks with a pin ned hex key that ships with the ON S 15454. A b utton on the righ t side of the she lf assembl y releases t he door . Y ou can remove the front door of th ...

  • Cisco Systems 15454-FTF2 - page 61

    1-9 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 Shelf and Ba ckplane H ardware 1.3 Front Door Figur e 1 -5 ONS 15 454 F ro nt Door Gr ound Str ap Figure 1-6 shows how to remove th e front door . 71048 ...

  • Cisco Systems 15454-FTF2 - page 62

    1-10 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapt er 1 Shelf an d Backpl ane Hard ware 1.3 Front Door Figur e 1 -6 Re mo ving the ON S 1545 4 Fr ont Door An erasa ble label is pasted on th e inside of the front door ( Figur e 1-7 ). Y ou can use the label to record slot assign ments, port assignm ents , card ty pes, node ID, rack ID, ...

  • Cisco Systems 15454-FTF2 - page 63

    1-11 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 Shelf and Ba ckplane H ardware 1.4 Ba ckp lan e C ove rs Figur e 1 -7 F r ont-Door Er asab le Label Note Th e fr ont door label also in cludes the Cl ass I a nd Cla ss 1M l aser warni ng ( Figure 1-8 ). Figur e 1 -8 Lase r W arn ing on the Fr on t-Door Label 1.4 Back plane Cov e ...

  • Cisco Systems 15454-FTF2 - page 64

    1-12 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapt er 1 Shelf an d Backpl ane Hard ware 1.4.1 Lo wer Bac kpla ne Co ver Figu re 1 - 9 Backp lane Covers 1.4.1 Lower Backplane C over The lower section of the O NS 15454 back plane is covered by either a cle ar plast ic prote ctor (15454-SA -ANSI) or a shee t metal cover (1545 4-SA-HD), w ...

  • Cisco Systems 15454-FTF2 - page 65

    1-13 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 Shelf and Ba ckplane H ardware 1.4.2 Rear Co ver 1.4.2 Re ar Co ver The ONS 154 54 has an opti onal cle ar plast ic rea r cover . This clear pl astic cover pro vides additi onal protec tion for the cable s and connec tors on the backpla ne. Figur e 1-11 shows the rear cover scre ...

  • Cisco Systems 15454-FTF2 - page 66

    1-14 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapt er 1 Shelf an d Backpl ane Hard ware 1.4.3 Alarm I nterface Panel Figu re 1 - 12 Inst alli ng the P last ic R ear C over with S pac ers 1.4.3 Alarm Interface P anel The AIP is located abo ve the alarm conta cts on the low er section of the backpl ane. The AIP pro vides sur ge pr otect ...

  • Cisco Systems 15454-FTF2 - page 67

    1-15 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 Shelf and Ba ckplane H ardware 1.5 Electrical Interface Assemblies Y ou can repla ce the AIP on an in- service s ystem without af fectin g traf f ic (e xcept Eth ernet tr af f ic on nodes runn ing a software r elease earl ier than R eleas e 4.0) . The circu it rep air feat ure a ...

  • Cisco Systems 15454-FTF2 - page 68

    1-16 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapt er 1 Shelf an d Backpl ane Hard ware 1.5.1 EI A Insta llatio n 1.5.1 EIA Installation Optiona l EIA ba ckpla ne covers ar e typica lly p reinstal led wh en or dered w ith th e ONS 15454. A m inimal amou nt of assembly might be re quired when EI As are orde red separ ately from the O N ...

  • Cisco Systems 15454-FTF2 - page 69

    1-17 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 Shelf and Ba ckplane H ardware 1.5.2 EIA Configu rations Ta b l e 1 - 2 shows the E IA type s suppo rted by bo th the 15454- SA-ANSI a nd the 15454 -SA-HD ( high density) shelf assemblies. SMB DS-1 DS-3 EC-1 DS3XM-6 84 pa ir s of SMB conn ector s Slot 1 Slot 2 Slot 3 Slot 4 Slot ...

  • Cisco Systems 15454-FTF2 - page 70

    1-18 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapt er 1 Shelf an d Backpl ane Hard ware 1.5.3 BNC E IA 1.5.3 BNC EIA The ONS 154 54 BNC EIA sup ports 24 DS-3 circuit s on each side of th e ONS 15454 (2 4 transmit and 24 receive connectors). If you install BNC EIAs on both side s of the shelf asse mbly , the ONS 15454 hosts up to 48 ci ...

  • Cisco Systems 15454-FTF2 - page 71

    1-19 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 Shelf and Ba ckplane H ardware 1.5.3 BNC EIA type. Use RG-59/U ca ble to co nnect to the ONS 15 454 BNC EI A. These cab les are re commen ded to connec t to a patch pa nel and are designed for long runs. Y ou ca n use BNC EIAs for DS-3 (i ncluding the DS3XM- 6 an d DS3X M-12) or ...

  • Cisco Systems 15454-FTF2 - page 72

    1-20 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapt er 1 Shelf an d Backpl ane Hard ware 1.5.4 High-Dens ity BNC EI A 1.5.3.2 BN C Insertion and Removal Tool Due to the lar ge numb er of BNC connectors on the h igh-density BNC EIA, you might require a special tool for insert ing and removing BN C EIAs ( Figure 1-14 ). Th is t ool also ...

  • Cisco Systems 15454-FTF2 - page 73

    1-21 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 Shelf and Ba ckplane H ardware 1.5.5 MiniBNC EIA Figur e 1 -15 High-Dens ity BNC Ba ckpl ane f or Us e in 1: N Pr ot ection Schem es The EIA side marked “ A” hosts 48 pairs of BNC co nnecto rs. Each co lumn of connect or pairs is numbere d and co rrespo nds to th e slot o f ...

  • Cisco Systems 15454-FTF2 - page 74

    1-22 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapt er 1 Shelf an d Backpl ane Hard ware 1.5.5 Min iBNC EIA • DS3/ EC 1-48 MiniBNC s support av a ilab le high-de nsity ca rds in unprot ected an d 1:N prote ction (whe re N < 2) protect ion groups. Ta b l e 1 - 3 shows prote ction gr oups and their a pplicabl e slot a ssignment s. 1 ...

  • Cisco Systems 15454-FTF2 - page 75

    1-23 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 Shelf and Ba ckplane H ardware 1.5.5 MiniBNC EIA Figur e 1 -16 MiniBNC Bac kplane f or Use in 1:N Pr ot ection Sc heme s ...

  • Cisco Systems 15454-FTF2 - page 76

    1-24 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapt er 1 Shelf an d Backpl ane Hard ware 1.5.5 Min iBNC EIA Ta b l e 1 - 4 and Ta b l e 1 - 5 sh ow the J-lab eling a nd co rrespondi ng ca rd po rts for a shel f ass embly conf igured with lo w- density electr ical cards. T able 1 -4 J-Labeling P or t Assignments f or a Sh elf Asse mbly ...

  • Cisco Systems 15454-FTF2 - page 77

    1-25 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 Shelf and Ba ckplane H ardware 1.5.5 MiniBNC EIA Ta b l e 1 - 6 and Ta b l e 1 - 7 sh ow the J-lab eling a nd co rresp onding c ard po rts f or a she lf as sembl y conf igured with high- density 48-port DS-3/E C-1electrical cards. T able 1 -5 J-Labeling P or t A ssignments f or ...

  • Cisco Systems 15454-FTF2 - page 78

    1-26 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapt er 1 Shelf an d Backpl ane Hard ware 1.5.5 Min iBNC EIA T able 1 -6 J-Labeling P or t A ssignments for a Shelf Co nfigur ed wit h High-Den sity Elec tr ica l Cards (A Side) Slot Port T ype TX J4 J3 J2 J1 J5 J6 J7 J8 T1 T13 T25 T37 T1 T13 T25 T37 T2 T14 T26 T38 T2 T14 T26 T38 T3 T15 T2 ...

  • Cisco Systems 15454-FTF2 - page 79

    1-27 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 Shelf and Ba ckplane H ardware 1.5.5 MiniBNC EIA 1.5.5.2 MiniBNC Insertion and Removal Tool Due to t he large num ber o f MiniBNC c onne ctors on the Min iBNC EIA , you might re quire a sp ecial t ool for in serting a nd r emoving Mi niBNC EIA s ( Figu re 1- 17 ) . This tool als ...

  • Cisco Systems 15454-FTF2 - page 80

    1-28 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapt er 1 Shelf an d Backpl ane Hard ware 1.5.6 SMB E IA Figur e 1 -1 7 MiniBNC Inser tion a nd Remo v al T ool This t ool ca n be o btain ed w ith P/N 227- T1000 from : Amphen ol US A (w ww .a mphenol .com) One K enned y Dri ve Danbury , CT 06810 Phone: 203 74 3-9272 Fax: 203 796-20 32 Th ...

  • Cisco Systems 15454-FTF2 - page 81

    1-29 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 Shelf and Ba ckplane H ardware 1.5.7 AMP Cham p EIA Figur e 1 -18 SMB EIA Backpla ne The SMB EIA has 84 transm it and 84 rece iv e connec tors on each side of the ON S 15454 fo r a total of 168 SMB conne ctors (84 circuit s). The EIA side marked “ A” hosts 84 SMB conne ctors ...

  • Cisco Systems 15454-FTF2 - page 82

    1-30 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapt er 1 Shelf an d Backpl ane Hard ware 1.5.7 AMP C hamp E IA Because each DS1-14 ca rd suppo rts 14 DS-1 ports, only 56 pi ns (28 pairs) of the 64-pi n connec tor are used. Prep are one 56-wir e cable for each DS-1 f acility installe d. Figur e 1 -19 AMP Champ EI A Backp lane Ta b l e 1 ...

  • Cisco Systems 15454-FTF2 - page 83

    1-31 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 Shelf and Ba ckplane H ardware 1.5.7 AMP Cham p EIA Ta b l e 1 - 9 shows the p in assign ments f or the AMP Ch amp conne ctors on the ONS 15 454 A MP Cham p EIA fo r a shie lded D S-1 cab le. T able 1 -8 AMP Cham p Connect or Pin As signments Signal/Wire Pin Pin Signal/Wire S ig ...

  • Cisco Systems 15454-FTF2 - page 84

    1-32 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapt er 1 Shelf an d Backpl ane Hard ware 1.5.8 UBIC- V EI A When using DS-1 AMP Cha mp cab les, yo u must equ ip the ONS 1 5454 wi th an AMP Cha mp conn ector EIA on each side of the backpla ne where DS-1 ca bles will ter minate. Ea ch AMP Champ co nnecto r on the EIA co rrespo nds to a s ...

  • Cisco Systems 15454-FTF2 - page 85

    1-33 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 Shelf and Ba ckplane H ardware 1.5.8 UBIC-V EIA Y ou can i nstall UBIC- Vs on one or both si des of the ON S 15454. As you fac e the rear of the ONS 154 54 shelf assembl y , th e righ t side i s the A side (154 54-EIA -UBIC V -A) and the le ft sid e is t he B si de (15454 -EIA-U ...

  • Cisco Systems 15454-FTF2 - page 86

    1-34 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapt er 1 Shelf an d Backpl ane Hard ware 1.5.9 UBIC- H EI A When insta lled with t he deep door and cablin g on the back plane, the ONS 15454 she lf measu res appro ximat ely 17.5 in ches (4 45 mm) de ep w hen pa rtiall y popul ated w ith ba ckpl ane cab les, 17.9 in ches (455 mm ) dee p ...

  • Cisco Systems 15454-FTF2 - page 87

    1-35 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 Shelf and Ba ckplane H ardware 1.5.9 UBIC-H EIA Figure 1-2 1 shows the A- and B-side conn ector labeling. Figur e 1 -21 UBIC-H EIA Connect or Label ing Ta b l e s 1-11 and 1-12 show the J-label ing and corresp ondin g card p orts for a shelf a ssembly configured with lo w-densi ...

  • Cisco Systems 15454-FTF2 - page 88

    1-36 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapt er 1 Shelf an d Backpl ane Hard ware 1.5.9 UBIC- H EI A Ta b l e s 1-13 and 1-14 show the J-label ing and corresp ondin g card p orts for a shelf a ssembly configured with hi gh-d ensity 48-po rt DS- 3/EC- 1 or 56- port DS-1 elect rical card s. T able 1 -1 1 J -Labeling P or t Ass ign ...

  • Cisco Systems 15454-FTF2 - page 89

    1-37 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 Shelf and Ba ckplane H ardware 1.5.9 UBIC-H EIA If you are installing UBIC-H EIAs aft er the shelf assembly is installed, plug the UBIC-H EIA into the backpla ne. The UBI C-H backp lane must r eplace th e standar d sheet met al cov er to provi de access to the cable conn ectors. ...

  • Cisco Systems 15454-FTF2 - page 90

    1-38 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapt er 1 Shelf an d Backpl ane Hard ware 1.5.10 EIA Replacem ent The A and B sides eac h host 16 high-de nsity , 50-pin SCSI connect ors. The A-s ide maps to Slots 1 thr ough 6 and t he B-side maps to Slots 1 2 throug h 17. In Software Rele ases prio r to Release 5.0, UBIC- Hs support un ...

  • Cisco Systems 15454-FTF2 - page 91

    1-39 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 Shelf and Ba ckplane H ardware 1.7.2 Electrical Interface Adapters Cautio n Always use the supp lied ESD wri stband when wor king w ith a p owered ONS 1 5454. Plug t he wrist band cable into the ESD jac k located on the lower -right outside edge of the shel f assembly . If you u ...

  • Cisco Systems 15454-FTF2 - page 92

    1-40 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapt er 1 Shelf an d Backpl ane Hard ware 1.8 UBIC-V Cables 1.8 UBIC-V C ables Note Cisco Sy stems announced the end-o f-sale and e nd-of- life dates for the Cisco ONS 15454 MSPP Uni ve rsal BackPl ane Inter face Adapter , V ertical Orie ntation ( UBIC-V), an d its DS1 an d DS3 Cables. For ...

  • Cisco Systems 15454-FTF2 - page 93

    1-41 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 Shelf and Ba ckplane H ardware 1.8 UBIC-V Cables T able 1 -16 UBIC-V DS-1 SCSI Connect or Pin Out Port SCSI Pin SCSI Pin Port #1 1 26 #7 FGnd 2 27 FGnd FGnd 3 28 FGnd FGnd 4 29 FGnd #2 5 30 #8 FGnd 6 31 FGnd FGnd 7 32 FGnd FGnd 8 33 FGnd #3 9 34 #9 FGnd 10 35 FGnd FGnd 11 36 FGn ...

  • Cisco Systems 15454-FTF2 - page 94

    1-42 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapt er 1 Shelf an d Backpl ane Hard ware 1.8 UBIC-V Cables Figu re 1 - 24 UBIC- V DS -1 Ca ble Schemat ic D iagram T a ble 1 -17 shows the UBIC-V DS-1 Tip/Ring co lor codi ng. UBIC-V DS-1 Cable Shield to connector shell T ip DS1 #1 Ring DS1 #1 T ip DS1 #2 Ring DS1 #2 100Ω Differential DS ...

  • Cisco Systems 15454-FTF2 - page 95

    1-43 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 Shelf and Ba ckplane H ardware 1.8 UBIC-V Cables T a ble 1 -18 iden tifies the UBIC-V SCSI connect or p in assign ments f or t he DS-3 /EC-1 cable s as referen ced fr om the EIA b ackplane to the SCSI co nnector . T able 1 -17 UBIC-V DS-1 Tip/Ring Color Codi ng Wire Colo r Signa ...

  • Cisco Systems 15454-FTF2 - page 96

    1-44 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapt er 1 Shelf an d Backpl ane Hard ware 1.8 UBIC-V Cables Figure 1-2 5 shows t he UBIC-V DS-3/EC- 1 cable schematic diagram. #5 1 7 42 #11 FGnd 18 43 FGn d FGnd 19 44 FGn d FGnd 20 45 FGn d #6 2 1 46 #12 FGnd 22 47 FGn d FGnd 23 48 FGn d FGnd 24 49 FGn d Not con nected 25 50 Not conne ct ...

  • Cisco Systems 15454-FTF2 - page 97

    1-45 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 Shelf and Ba ckplane H ardware 1.9 UBIC-H Cables Figu re 1 - 25 UB IC- V DS- 3/EC -1 C able S chemat ic Di agram 1.9 UBIC-H Cables The U BIC-H EIA is desi gned to suppo rt DS-1 , DS -3, o r EC-1 s igna ls. The t ype of sign al supp orted is determi ned by the UBIC- H cabl e asse ...

  • Cisco Systems 15454-FTF2 - page 98

    1-46 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapt er 1 Shelf an d Backpl ane Hard ware 1.9 UBIC- H Cable s T o suppo rt DS- 3 or EC-1 signals, selec t the DS-3 /EC-1 U BIC-H cable assembl y ( part nu mber 15454-CA DS3-H-< length> ). DS-1 cab les for th e UBIC- H ha ve a ma ximu m supp orte d distan ce of 655 feet (199 .6 m) . D ...

  • Cisco Systems 15454-FTF2 - page 99

    1-47 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 Shelf and Ba ckplane H ardware 1.9 UBIC-H Cables Figur e 1 -26 Cable Conne ct or Pins T a ble 1 -19 identif ies the UBIC-H SCSI conn ector pin assi gnments for the DS- 1 cables as re ferenc ed from the EI A backpl ane to the SCSI co nnecto r . Note Con v ersion from the bac k pl ...

  • Cisco Systems 15454-FTF2 - page 100

    1-48 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapt er 1 Shelf an d Backpl ane Hard ware 1.9 UBIC- H Cable s Figu re 1 - 27 UBIC- H DS -1 Ca ble Schemat ic D iagram T a ble 1 -20 shows the UBIC-H DS-1 Tip/Ring co lor codi ng. FGnd 23 48 FGnd FGnd 24 49 FGnd #13 25 50 #14 T able 1 -19 UBIC-H DS-1 SCSI Connecto r Pin Out (continued) Port ...

  • Cisco Systems 15454-FTF2 - page 101

    1-49 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 Shelf and Ba ckplane H ardware 1.9 UBIC-H Cables T a ble 1 -21 iden tifies the UBIC-H SCSI connect or p in assign ments f or t he DS-3 /EC-1 cable s as referen ced fr om the EIA b ackplane to the SCSI co nnector . T able 1 -20 UBIC-H DS-1 Tip/Ring Col or Coding Wire Colo r Signa ...

  • Cisco Systems 15454-FTF2 - page 102

    1-50 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapt er 1 Shelf an d Backpl ane Hard ware 1.9 UBIC- H Cable s Figure 1-2 8 shows t he UBIC-H DS-3/EC-1 cable schematic diagram #5 1 7 42 #11 FGnd 18 43 FGn d FGnd 19 44 FGn d FGnd 20 45 FGn d #6 2 1 46 #12 FGnd 22 47 FGn d FGnd 23 48 FGn d FGnd 24 49 FGn d Not con nected 25 50 Not conne ct ...

  • Cisco Systems 15454-FTF2 - page 103

    1-51 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 Shelf and Ba ckplane H ardware 1.10 Et hernet Cables Figu re 1 - 28 UB IC- H DS- 3/EC -1 C able S chemat ic Di agram 1.10 Eth ernet Cables Ether net ca bles u se RJ- 45 co nnecto rs, and are straigh t-thro ugh or cro ssove r, depending on w hat is connect ed to t hem. T a ble 1 ...

  • Cisco Systems 15454-FTF2 - page 104

    1-52 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapt er 1 Shelf an d Backpl ane Hard ware 1.10 Ethernet Cables Figure 1-2 9 shows the pin locations on 100BaseT co nnecto r . Figu re 1 - 29 1 0 0 Bas eT Co nne ctor Pi ns Figure 1-3 0 shows the straight-th rough Et hernet cable sche matic. Use a straight -through cable whe n connec ting t ...

  • Cisco Systems 15454-FTF2 - page 105

    1-53 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 Shelf and Ba ckplane H ardware 1.11 Cable Rout ing a nd Managem ent Figure 1-3 1 sho ws t he cr osso v er Et hern et ca ble sc hemat ic. Us e a cr osso v er cab le when co nnectin g to a switch or hub. Figur e 1 -31 Cros sov er Cable 1.11 Cable Routi ng and Manageme nt The ONS 1 ...

  • Cisco Systems 15454-FTF2 - page 106

    1-54 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapt er 1 Shelf an d Backpl ane Hard ware 1.11. 1 Fi ber M anagem ent Figur e 1 -32 Managing C ables on the F r ont P anel 1.11.1 Fiber Manage ment The j umper routing fins are designe d to r oute fiber jumper s out of both sides of the shelf . Slots 1 to 6 exi t to th e left, and Slots 1 ...

  • Cisco Systems 15454-FTF2 - page 107

    1-55 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 Shelf and Ba ckplane H ardware 1.11.2 Fib er Managem ent Using th e Tie-Do wn Bar T a ble 1 -23 pro vide s the ma ximu m capa city of the fi ber chan nel for one side of a shelf, depen din g on fiber size and numbe r of Ether net cable s runni ng through t hat fiber channel . Pl ...

  • Cisco Systems 15454-FTF2 - page 108

    1-56 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapt er 1 Shelf an d Backpl ane Hard ware 1.11.3 Coaxial Cable Manage ment 1.11.3 C oaxi al Cable Mana gement Coaxia l cab les co nnec t to EIA s on the O NS 1 5454 b ackp lane u sing cable conn ector s. EI As fea ture cable -manag emen t eyelet s for tie wrappi ng or lacing ca bles t o th ...

  • Cisco Systems 15454-FTF2 - page 109

    1-57 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 Shelf and Ba ckplane H ardware 1.12.1 Wir e-Wrap an d Pin Conn ections Figur e 1 -35 AEP Pr int ed Cir cuit Boa rd Asse mbly Figure 1-3 6 shows the AEP block diag ram. Figu re 1 - 36 AEP B lock Di ag ram Each AE P alarm input port has provis ionable l abel an d sev erity . The a ...

  • Cisco Systems 15454-FTF2 - page 110

    1-58 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapt er 1 Shelf an d Backpl ane Hard ware 1.12.1 Wire-Wrap and Pin Connec tions Figur e 1 -37 AEP Wir e-W r ap Connections t o Back plane P ins T a ble 1 -24 shows the backplan e pin ass ignment s and corre spondi ng signal s on the AIC-I an d AEP . Figure 1-3 8 is a circuit diag ram o f t ...

  • Cisco Systems 15454-FTF2 - page 111

    1-59 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 Shelf and Ba ckplane H ardware 1.12.1 Wir e-Wrap an d Pin Conn ections Figu re 1 - 38 Alarm In put C ircui t Dia gram T a ble 1 -25 lists the connections to the e xternal ala rm sources. 78473 Station 48 V max. 2 mA AEP/AIE GND VBA T– VBA T– Input 1 Input 48 T able 1 -25 Ala ...

  • Cisco Systems 15454-FTF2 - page 112

    1-60 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapt er 1 Shelf an d Backpl ane Hard ware 1.12.1 Wire-Wrap and Pin Connec tions Figure 1-3 9 is a circui t diagram of the ala rm output s (Outputs 1 an d 16 are shown in the exam ple) . Figu re 1 - 39 Alarm Outpu t Circui t Di agram Use the pin numbers in T able 1- 26 to connect t o the ex ...

  • Cisco Systems 15454-FTF2 - page 113

    1-61 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 Shelf and Ba ckplane H ardware 1.13 Filler Card 1.13 Fill er Card Filler cards are de signed to occup y empty multiservic e and AIC-I slots in the Cisco ONS 15454 (Slots 1–6, 9, and 12 – 17). Th e f iller car d cannot operate i n the XC slots (Slots 8 and 10) o r TCC slot s ...

  • Cisco Systems 15454-FTF2 - page 114

    1-62 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapt er 1 Shelf an d Backpl ane Hard ware 1.14 Fan- Tray Assemb ly Figu re 1 - 40 Detecta ble F ille r Card F acepl ate 1.14 Fan-Tray Assembly The fan -tray assembly is locate d at the bottom of the ONS 15454 bay assem bly . The fa n tray is a removable drawer that holds fans and fan-contr ...

  • Cisco Systems 15454-FTF2 - page 115

    1-63 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 Shelf and Ba ckplane H ardware 1.14.1 Fan Tray Uni ts for ONS 15454 Cards The fr ont of the f an-tr ay assem bly has an LCD screen that pro vides slot- a nd port -le v el infor mation fo r all ON S 15454 c ard slots, includ ing the number o f Criti cal, Major, and Minor a larms. ...

  • Cisco Systems 15454-FTF2 - page 116

    1-64 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapt er 1 Shelf an d Backpl ane Hard ware 1.14. 1 Fan Tray Units f or ONS 15454 Cards DS3/E C1-48 Y es Y es DS3i-N-12 Y es Y es DS3-12E Y es Y es DS3N- 12E Y es Y es DS3XM-6 Y es Y es DS3XM- 12 Y es Y es OC3 IR 4 S H 131 0 Y es Y es OC3 IR 4/ STM1 S H 1310 Y es Y es OC3 I R/ STM1 SH 1310 - ...

  • Cisco Systems 15454-FTF2 - page 117

    1-65 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 Shelf and Ba ckplane H ardware 1.14.2 Fa n Speed 1.14.2 Fan Speed Fan speed is contro lled by TCC2/TCC 2P card tem perature sensors. The sensors me asure th e input air temper ature at th e fan- tray asse mbly . Fa n speed option s are lo w , mediu m, and h igh. If the TC C2/TCC ...

  • Cisco Systems 15454-FTF2 - page 118

    1-66 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapt er 1 Shelf an d Backpl ane Hard ware 1.14. 5 Pil ot F use Cautio n Do no t ope rate an ON S 15 454 wi thout the m andato ry fan- tray a ir filter . Cautio n Inspect the air f il ter e very 30 days, and clean the f ilte r ev ery three to six months. Repl ace the air f ilter e ver y two ...

  • Cisco Systems 15454-FTF2 - page 119

    1-67 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 Shelf and Ba ckplane H ardware 1.16 Alarm, Timing , LAN, and Craft P in Connecti ons The ONS 154 54 has redund ant –48 VDC #8 power terminals on the shelf-asse mbly backpl ane. Th e terminals ar e labeled B A T1 , RET1, B A T2, and RET2 and are loca ted on the lo wer section o ...

  • Cisco Systems 15454-FTF2 - page 120

    1-68 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapt er 1 Shelf an d Backpl ane Hard ware 1.16 Alar m, Timing, LA N, and Cra ft Pin Connec tions Figur e 1 -42 ONS 15 454 Bac kplan e Pinouts (Rel ease 3.4 o r Lat er) 1 2 3 4 A FG4 FG3 FG2 FG1 BITS LAN 1 2 3 4 A B 1 2 3 4 A B IN 1 2 3 4 A B IN/OUT FG6 FG5 7 8 9 5 10 6 A B A B ENVIRONMENTA ...

  • Cisco Systems 15454-FTF2 - page 121

    1-69 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 Shelf and Ba ckplane H ardware 1.16.1 Alarm Conta ct Connecti ons Figur e 1 -43 ONS 15 454 Bac kplane Pi nouts 1.16.1 Alarm Contact Connectio ns The al arm p in field suppo rts up to 17 ala rm cont acts, including fou r audi ble ala rms, f our vi sual ala rms, one al arm cutoff ...

  • Cisco Systems 15454-FTF2 - page 122

    1-70 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapt er 1 Shelf an d Backpl ane Hard ware 1.16.2 Timing Con nections V isual an d audi ble ala rms are ty pically wired to trigge r an alar m ligh t or be ll at a c entral al arm co llecti on point whe n the corr espon ding cont acts ar e close d. Y ou c an use t he Alarm Cu toff pins to a ...

  • Cisco Systems 15454-FTF2 - page 123

    1-71 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 Shelf and Ba ckplane H ardware 1.16.4 TL1 Craft Interface Installation 1.16.4 TL1 Craft Interf ace Installation Y ou c an use the craft pins on the ONS 15454 ba ckplan e or t he EIA /TIA-232 port on the T CC2/TCC 2P card f aceplat e to crea te a VT100 emul ation wi ndo w to ser ...

  • Cisco Systems 15454-FTF2 - page 124

    1-72 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapt er 1 Shelf an d Backpl ane Hard ware 1.17. 1 Car d Sl ot Re quire ment s Figur e 1 -44 Installing Card s in the ONS 1545 4 1.17.1 Card Slot Requiremen ts The ONS 154 54 shelf assem bly has 17 card slo ts number ed sequent ially from left to righ t. Slots 1 to 6 and 12 to 17 are mul ti ...

  • Cisco Systems 15454-FTF2 - page 125

    1-73 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 Shelf and Ba ckplane H ardware 1.17.1 Card Slot Requir ements Note Protection schemes and EI A types can af fect slot compa tibility . T a ble 1 -33 lists the number of ports, li ne rate s, connec tor option s, and connector locations for ONS 154 54 op tical, elec trical , and E ...

  • Cisco Systems 15454-FTF2 - page 126

    1-74 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapt er 1 Shelf an d Backpl ane Hard ware 1.17. 1 Car d Sl ot Re quire ment s DS3/EC1- 48 48 2.147 Gbps SMB or BNC Ba ckplane EC1-12 12 51.84 Mbps SMB or BNC 1 Backplane E100T -12 12 100 Mbps RJ-45 Faceplate E1000- 2 2 1 G bps SC (GBI C) Faceplate E100T -G 12 100 Mbps RJ-45 Faceplate E1000 ...

  • Cisco Systems 15454-FTF2 - page 127

    1-75 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 Shelf and Ba ckplane H ardware 1.17.2 Card Replacement 1.17.2 Card Replac ement T o replace an ONS 1545 4 card with anot her car d of the sam e type, you do not nee d to make any chang es to the datab ase; remov e the old ca rd and replace it with a ne w card. T o repl ace a car ...

  • Cisco Systems 15454-FTF2 - page 128

    1-76 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapt er 1 Shelf an d Backpl ane Hard ware 1.18 Softwa re and Hardware Compatibi lity 1.18 Software and Hardware Compatibility T a ble 1 -34 shows ONS 15454 softw are and hardwa re compatibility for nodes con figu red with XC or XCVT cards f or Re lease s 4.6, 4.7, 5 .0, 6 .0, 7 .0, 7.2 , 8 ...

  • Cisco Systems 15454-FTF2 - page 129

    1-77 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 Shelf and Ba ckplane H ardware 1.18 Software and Hardware Compatibility DS3X M-12 SA-HD a nd SA-ANSI Not support ed Fully compatible Fully compatible Fully compatible Fully compatible Fully compatible Fully compatible EC1-12 A ll Full y compatible Fully compatible Fully compatib ...

  • Cisco Systems 15454-FTF2 - page 130

    1-78 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapt er 1 Shelf an d Backpl ane Hard ware 1.18 Softwa re and Hardware Compatibi lity OC12 LR 1310 All Fully compatible Fully compatible Fully compatible Fully compatible Fully compatible Fully compatible Fully compatible OC12 LR 1550 All Fully compatible Fully compatible Fully compatible F ...

  • Cisco Systems 15454-FTF2 - page 131

    1-79 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 Shelf and Ba ckplane H ardware 1.18 Software and Hardware Compatibility T a ble 1 -35 shows ON S 15454 software and har dware compatibil ity for systems conf ig ured with XC10G or XC-V XC-10G card s for Relea ses 4. 6, 4.7, 5.0, 6 .0, 7 .0, 7.2 , 8.0 , and 8 .5. T he 1545 4-SA- ...

  • Cisco Systems 15454-FTF2 - page 132

    1-80 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapt er 1 Shelf an d Backpl ane Hard ware 1.18 Softwa re and Hardware Compatibi lity DS3/E C1-48 1 SA-HD Not supported Fully compatible Fully compatible Fully compatible Fully compatible Fully compatible Fully compatible DS3XM-6 All Fully compatible Fully compatible Fully compatible Fully ...

  • Cisco Systems 15454-FTF2 - page 133

    1-81 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 Shelf and Ba ckplane H ardware 1.18 Software and Hardware Compatibility OC12/STM4-4 SA-HD and SA-ANSI Fully compatible Fully compatible Fully compatible Fully compatible Fully compatible Fully compatible Fully compatible OC12 IR 1310 All Fully compatible Fully compatible Fully c ...

  • Cisco Systems 15454-FTF2 - page 134

    1-82 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapt er 1 Shelf an d Backpl ane Hard ware 1.18 Softwa re and Hardware Compatibi lity If an upgr ade is required for compa tibility , contact the Cisco T echnical Assistance Center (T A C) . For contact info rmation, go to http://w ww .cisco.com/tac . 3. Slots 1 to 4 and 1 4 to 17 g ive a t ...

  • Cisco Systems 15454-FTF2 - page 135

    CH A P T E R 2-1 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 2 Common Cont rol Cards Note Th e terms "Unidire ctiona l Path Switched Ri ng" and " UPSR" may appear in Ci sco liter ature. These t erms do not refer t o using Cisc o ONS 15xxx prod ucts in a unid irecti onal path sw itched ring configuratio n. Rather , th ...

  • Cisco Systems 15454-FTF2 - page 136

    2-2 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chap ter 2 Comm on Con tro l Card s 2.1.1 Car ds Summ ary T able 2-1 Common Contr ol Car d Fu nctions Card Description For Additional Information. .. TCC2 T he Advanc ed T iming, Communicat ions, an d Contr ol (TC C2 ) card is the main pro cessi ng cente r for the ONS 1545 4 and provides sys ...

  • Cisco Systems 15454-FTF2 - page 137

    2-3 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 2 Common Control Cards 2.1.2 Card Compatibility 2.1.2 Card Compatibility Ta b l e 2 - 2 lists the Cisco Tr ansport Contr oller (CTC) softwa re release comp atibility for eac h comm on-co ntro l car d. In the ta bles be low , “ Y es” means c ards are comp atib le w ith t he list ...

  • Cisco Systems 15454-FTF2 - page 138

    2-4 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chap ter 2 Comm on Con tro l Card s 2.1.3 Cross-C onnect Card Com patib ility Ta b l e 2 - 4 lists the cross-c onnect car d compat ibility for ea ch electr ical card. F o r electr ical card so ftware compatiblilt y , see T able 3- 2 on page 3- 3 . Note The XC car d is co mpat ible with most ...

  • Cisco Systems 15454-FTF2 - page 139

    2-5 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 2 Common Control Cards 2.1.3 Cross-Connect Card Compatibility Ta b l e 2 - 6 lists the cross-connect car d compatibility for ea ch Ethernet card. For Ether net card softwa re compatibilit y , see T able 5- 2 on page 5- 3 . Note Th e XC card i s compa tible wit h most Eth erne t car ...

  • Cisco Systems 15454-FTF2 - page 140

    2-6 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chap ter 2 Comm on Con tro l Card s 2.2 TCC2 Card Ta b l e 2 - 7 lists the cross-conn ect card compa tibility for eac h storage area n etwor k (SAN) card. F or SAN card software com patibility , see the “6.1.3 FC_MR -4 Compa tibility” section on pa ge 6-4 . 2.2 TCC2 Card Note For hard wa ...

  • Cisco Systems 15454-FTF2 - page 141

    2-7 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 2 Common Control Cards 2.2.1 TCC2 Card Functionality Figur e 2-1 TCC2 Car d F a ceplat e and Bloc k Diagr am 2.2.1 TCC2 Car d Functionality The TCC2 card s upports m ultichannel, high-level data link control (HDLC) processing f or the DCC. Up to 84 DCCs can be routed over the TCC2 ...

  • Cisco Systems 15454-FTF2 - page 142

    2-8 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chap ter 2 Comm on Con tro l Card s 2.2.2 TCC 2 Car d-Le vel I ndi cator s The TCC2 car d also orig inates and terminat es a cell bu s carr ied ov er th e module . The cell b us supp orts links b etween any two card s in the nod e, w hich is essenti al fo r peer-to- peer c ommunic atio n. Pe ...

  • Cisco Systems 15454-FTF2 - page 143

    2-9 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 2 Common Control Cards 2.2.3 Network-Level Indicators 2.2.3 Network-Level Indic ators Ta b l e 2 - 8 describe s the six netwo rk-level LEDs on the TCC2 facep late. T able 2-8 TCC2 Car d-Lev el Indicator s Card-Level LEDs Definition Red F AIL LED This LE D is on dur ing reset. The F ...

  • Cisco Systems 15454-FTF2 - page 144

    2-10 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chap ter 2 Comm on Con tro l Card s 2.2.4 Powe r-Le vel I ndi cator s 2.2.4 Po wer-Lev el Indi cator s Ta b l e 2 - 9 describe s the two power-lev el LEDs on the TC C2 faceplat e. 2.3 TC C2P Card Note For hard ware sp ecif ications , see th e “ A.4.2 TCC2P Card Specif icati ons” s ectio ...

  • Cisco Systems 15454-FTF2 - page 145

    2-11 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 2 Common Control Cards 2.3.1 TCC2P Functionality Figur e 2-2 TCC2P F a ceplat e and Block Diagr am 2.3.1 TCC2P Functionality The TC C2P card sup port s mult ichann el, hig h-level data link c ontrol (HDL C) pr ocess ing for the D CC. Up to 84 DCCs c an be ro uted over the TCC2P c ...

  • Cisco Systems 15454-FTF2 - page 146

    2-12 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chap ter 2 Comm on Con tro l Card s 2.3.1 TCC2 P Func tio nality The TCC 2P card also or iginates and terminat es a ce ll bu s carrie d o v er the modu le. T he cell b u s suppor ts links b etween any two card s in the nod e, w hich is essenti al fo r peer-to- peer c ommunic atio n. Peer-to ...

  • Cisco Systems 15454-FTF2 - page 147

    2-13 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 2 Common Control Cards 2.3.1 TCC2P Functionality refere nce a s the system -timin g ref erence. Y ou can provisi on any o f the clo ck inpu ts as prima ry or secondary timing sources. A slo w-referen ce tracking loo p allows th e TCC2P card to synchronize with the rec overed clock ...

  • Cisco Systems 15454-FTF2 - page 148

    2-14 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chap ter 2 Comm on Con tro l Card s 2.3.2 TCC2P Card-Level Indic ators 2.3.2 TC C2P Card -Level In dicat ors The TC C2P face plat e has ten LE Ds. T able 2 -10 describes th e two card-level LEDs on the TCC2P face plate. 2.3.3 Network-Level Indic ators T a ble 2 -11 describes th e six n etwo ...

  • Cisco Systems 15454-FTF2 - page 149

    2-15 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 2 Common Control Cards 2.3.4 Power- Level Indicat ors 2.3.4 Po wer-Lev el Indi cator s T a ble 2 -12 des cribe s the tw o po wer-le vel LEDs on the TCC2 P face plate. 2.4 X CVT Card Note For hard ware sp ecif ications , see th e “ A .4.3 XCVT Card Specificati ons” sectio n on ...

  • Cisco Systems 15454-FTF2 - page 150

    2-16 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chap ter 2 Comm on Con tro l Card s 2.4.1 XCVT Functionality Figur e 2-3 X CVT F a ceplat e and Bloc k Diagr am 2.4.1 XCVT Funct ionality The STS-1 swi tch matr ix on the X CVT card consists of 28 8 bidire ction al ports and ad ds a VT ma trix that can mana ge up to 336 bi direc tional VT1. ...

  • Cisco Systems 15454-FTF2 - page 151

    2-17 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 2 Common Control Cards 2.4.2 VT Mapping The XCVT card wor ks with the TCC2/TCC2P cards to maintain connection s and set up cross-connects within t he node . The cross-c onnect c ards (suc h as t he XCV T and XC10G) , inst alled in Slots 8 and 1 0, are requ ired to op erate the ONS ...

  • Cisco Systems 15454-FTF2 - page 152

    2-18 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chap ter 2 Comm on Con tro l Card s 2.4.3 XCVT Hosting DS3XM-6 or DS3XM-12 2.4.3 XC VT Hosting DS3X M-6 or DS3XM-12 A DS3XM card can demul tiple x (map do wn to a low er rate) M13-map ped DS-3 signals into 28 DS-1s that are then mappe d to VT1. 5 payload s. The V T1.5s can t hen be cross- c ...

  • Cisco Systems 15454-FTF2 - page 153

    2-19 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 2 Common Control Cards 2.5 XC10G Card 2.5 XC10G Ca rd Note For hard ware sp ecif ications , see th e “ A .4.4 XC10G Card Specificati ons” sectio n on page A-14 . The 10 Gi gabit Cros s Connect (XC1 0G) card establis hes conne ctio ns at the STS-1 and VT lev els. Th e XC10G pro ...

  • Cisco Systems 15454-FTF2 - page 154

    2-20 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chap ter 2 Comm on Con tro l Card s 2.5.1 XC1 0G Func tio nalit y Figur e 2-5 X C1 0G F aceplat e and Block Dia gra m 2.5.1 XC10G Functionality The XC 10G ca rd mana ges up t o 672 bidirec tional VT1.5 ports an d 1152 bidirec tional STS-1 port s. The TCC2/TC C2P cards assign ba ndwidth to e ...

  • Cisco Systems 15454-FTF2 - page 155

    2-21 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 2 Common Control Cards 2.5.2 VT Mapping Cautio n Do not opera te the ONS 15 454 w ith o nly one XCVT or XC1 0G c ard. T wo c ross-conne ct c ards of the same type (ei ther two XCVT or two XC 10G cards) must always be installed. Figure 2-6 sho ws the cros s-conn ect matrix. Figur e ...

  • Cisco Systems 15454-FTF2 - page 156

    2-22 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chap ter 2 Comm on Con tro l Card s 2.5.3 XC1 0G Host ing DS3XM-6 o r DS3XM -12 2.5.3 XC10G Hosting DS3XM-6 or DS3XM-12 A DS3XM card can demul tiple x (map do wn to a low er rate) M13-map ped DS-3 signals into 28 DS-1s that ar e the n mappe d to VT 1.5 p ayload s. The VT1.5s can the n be cr ...

  • Cisco Systems 15454-FTF2 - page 157

    2-23 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 2 Common Control Cards 2.5.5 XCVT/XC10G/XC-VXC-10G Compatibility 2.5.5 XCVT/XC10G/XC-VX C-10G Compatibility The XC10G and XC -VXC-10 G cards supp ort th e same feat ures as the XCVT car d. The XC 10G or XC-VXC -10G c ards ar e requi red for OC-1 92, OC-4 8 any-slot (A S), OC3 -8, ...

  • Cisco Systems 15454-FTF2 - page 158

    2-24 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chap ter 2 Comm on Con tro l Card s 2.6.1 XC-VXC-10G Functional ity Figur e 2-7 X C-VX C-1 0G F aceplat e and Blo c k Diagr am 2.6.1 XC-VXC-10G Functionality The XC-V XC-10G card manage s up to 1152 bid irectiona l high- order STS-1 po rts. In addit ion, it is able to simul taneou sly mana ...

  • Cisco Systems 15454-FTF2 - page 159

    2-25 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 2 Common Control Cards 2.6.1 XC-VXC-10G Functionality At the STS level (high-orde r cr oss-conne ct), the X C-VXC-1 0G is a lways non-bl ocking (any STS-1 fr om the system can be cross-con nected to any other STS-1 wit hout limita tion up to 1152 bidi rectiona l STS-1 ports ( 576 ...

  • Cisco Systems 15454-FTF2 - page 160

    2-26 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chap ter 2 Comm on Con tro l Card s 2.6.2 VT M apping Figur e 2-8 X C-VX C-1 0G Cr oss-Connec t Matr ix 2.6.2 VT Mapp ing The VT struc ture is desi gned to tran sport and switch payloa ds below the DS-3 rate . The ONS 154 54 perform s VT mappi ng acc ording to T e lcordia GR- 253-CORE stand ...

  • Cisco Systems 15454-FTF2 - page 161

    2-27 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 2 Common Control Cards 2.6.3 XC-VXC-10G Hostin g DS3XM-6 or DS3XM-12 2.6.3 XC -VXC-10G Hostin g DS3XM-6 or DS3X M-12 A DS3XM card can demul tiple x (map do wn to a low er rate) M13-map ped DS-3 signals into 28 DS-1s that are then mapp ed to VT1 .5 payl oads . The VT1 .5s can th en ...

  • Cisco Systems 15454-FTF2 - page 162

    2-28 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chap ter 2 Comm on Con tro l Card s 2.6.5 XC-VXC-10G Compatibility 2.6.5 XC-VXC-10G Compatibility The XC-VX C-10G c ard suppor ts the same featur es a s the X C10G card. Eith er th e XC10G or XC-VX C-10G ca rd is requi red for OC-192, OC 3-8, and OC12-4 operat ion and O C-48 AS ope ration. ...

  • Cisco Systems 15454-FTF2 - page 163

    2-29 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 2 Common Control Cards 2.7.1 AIC-I Card- Level Indicat ors Figur e 2-9 AIC-I F acep late and Bloc k Dia gram 2.7.1 AIC-I Card-Level Indica tors T a ble 2 -19 des cribe s the eight c ard-le vel LE Ds on the AI C-I ca rd f acepl ate. AIC-I F ail Express orderwire Local orderwire EEP ...

  • Cisco Systems 15454-FTF2 - page 164

    2-30 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chap ter 2 Comm on Con tro l Card s 2.7.2 External A larms and Co ntrols 2.7.2 External Alarms an d Controls The AIC- I card provides input/out put al arm cont act clo sures . Y ou c an define up to t welve external alarm inputs and 4 external a larm i nputs /output s (user configurab le). ...

  • Cisco Systems 15454-FTF2 - page 165

    2-31 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 2 Common Control Cards 2. 7.3 O rde rw ire The ou tput con tacts can be pro vis ioned to close on a trigger or to close ma nual ly . The trig ger can be a local alarm se v erity threshold , a remote alarm se v erity , or a virtual wire: • Local NE alarm se verity: A hierarchy of ...

  • Cisco Systems 15454-FTF2 - page 166

    2-32 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chap ter 2 Comm on Con tro l Card s 2.7.4 Powe r Mon itori ng The AIC- I supports selective dual tone multifre quen cy (DTMF) dial ing for tel ephony connec tivity , which c auses one AIC-I c ard or all ON S 15454 AIC-I c ards on t he orde rwire su bnetwork to “ring . ” The ringe r/b uz ...

  • Cisco Systems 15454-FTF2 - page 167

    2-33 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 2 Common Control Cards 2.7.6 Data Communications Ch annel 2.7.6 Data Communic ations Ch annel The DCC fe atures a dedicated da ta chan nel of 576 kbps (D 4 to D12 bytes) betw een two nodes in an ONS 15454 network. Each AI C-I card p rovides two DCCs, DC C-A and DCC- B, throug h se ...

  • Cisco Systems 15454-FTF2 - page 168

    2-34 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chap ter 2 Comm on Con tro l Card s 2.7.6 Data Co mmunica tions Chan nel ...

  • Cisco Systems 15454-FTF2 - page 169

    CH A P T E R 3-1 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 3 Electrical Cards This ch apter d escr ibes Cis co ONS 1 5454 ele ctrica l car d featu res a nd functi ons. For insta llation and c ard turn-up proc edures , ref er to the Cisco ONS 1 5454 Pr ocedu r e Guide . F or inf ormation on the electr ical interf ace assemblie s (EIAs) ...

  • Cisco Systems 15454-FTF2 - page 170

    3-2 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapter 3 Electrical Cards 3.1.1 Card Summary T able 3-1 Cisco O NS 15454 Electr ical Car ds Card Name Des cription For Additional Information EC1-12 The EC1 -12 c ard prov ides 12 T el cordi a-co mplia nt, GR-25 3 ST S-1 elec trical ports per card . Eac h po rt opera tes at 51.84 0 Mbp s ov ...

  • Cisco Systems 15454-FTF2 - page 171

    3-3 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 3 Electrical Cards 3.1.2 Card Compatibility 3.1.2 Card Compatibility Ta b l e 3 - 2 lists the CTC so ftware co mpatibility f or each e lectrical card. S ee T able 2-4 on page 2- 4 for a list of cro ss-conn ect cards t hat are compa tible with each ele ctrica l card. Note “Y es” ...

  • Cisco Systems 15454-FTF2 - page 172

    3-4 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapter 3 Electrical Cards 3.2 Bit Error Rat e Testing 3.2 Bit Erro r Rate Testing The bit error r ate testin g (BER T) f eature ca n be used to test th e connecti vity , error rat e, and error count of the traffic runnin g on an e lectri cal in put/out put (I/O ) card port. The BER T featu ...

  • Cisco Systems 15454-FTF2 - page 173

    3-5 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 3 Electrical Cards 3.3 EC1-12 Ca rd BERT A larms The BER T featur e can rais e the f ollo wing two alarms in CT C: • BER T_ENABL—S pecifies t hat BE R T fe atu re is en able d. • BER T_SY NC_F AIL —Synchr onizatio n is necess ary a nd oc curs when th e er rors in jected by ...

  • Cisco Systems 15454-FTF2 - page 174

    3-6 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapter 3 Electrical Cards 3.3.3 EC1-12 Hosted by XCVT, XC10G, or XC-VXC-10G Figu re 3-1 EC1 -12 Facepl ate and Bl ock Diag ram 3.3.3 EC1-12 Hosted by XC VT, XC10G, o r XC-VXC-10 G All 12 STS-1 pa yloads fro m an EC1-12 ca rd are ca rried to the XCVT , XC 10G, or XC-V XC-10 G card where th e ...

  • Cisco Systems 15454-FTF2 - page 175

    3-7 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 3 Electrical Cards 3.3.5 EC1-12 Port- Level Indi cators 3.3.5 EC1-12 Port-Level Indicators Y ou c an obtai n the stat us of the EC1- 12 ca rd ports by using the LCD scr een on t he ONS 1 5454 fan tray . Use the LCD to view the status of any port or card slot ; the scree n displays ...

  • Cisco Systems 15454-FTF2 - page 176

    3-8 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapter 3 Electrical Cards 3.4.2 DS1- 14 and DS1N-1 4 Sl ot Com patib ility If you us e the DS 1N-14 as a standar d DS-1 ca rd in a 1:1 pr otect ion group , you c an install the DS1N -14 card in Sl ots 1 to 6 or 12 t o 17 on the O NS 15454. I f you use the card’ s 1:N funct ionality , y ou ...

  • Cisco Systems 15454-FTF2 - page 177

    3-9 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 3 Electrical Cards 3.4.4 DS1-14 and DS1N-14 Host ed by XCVT, XC10G, or X C-VXC-10G Figur e 3-3 DS1N -14 F aceplat e and B lock Diagr am 3.4.4 DS1-14 and DS1N-14 Ho sted by XC VT, XC1 0G, or XC-VXC-10 G All 14 VT1.5 pa yloads fr om DS1-1 4 and DSIN- 14 cards are carried i n a single ...

  • Cisco Systems 15454-FTF2 - page 178

    3-10 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapter 3 Electrical Cards 3.4.6 DS1-1 4 and DS1N -14 Port -Level Indi cators 3.4.6 DS1-14 and DS1N-1 4 Port-Lev el Indicators Y ou ca n obtain the stat us of the DS1- 14 and DS1N -14 card por ts by using the LCD scree n on the ONS 15454 fan-t ray assemb ly . Use th e LCD to view the status ...

  • Cisco Systems 15454-FTF2 - page 179

    3-11 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 3 Electrical Cards 3.5.2 DS1/E1-56 Facepl ate and Block Dia gram Note The DS1/E1-56 card supports an error less software-in itiated cross-co nnect card switch when used in a shelf equi pped with XC-V XC-10G and TCC2/TCC2 P cards. Y ou can i nstall th e DS1/E1 -56 card in Slots 1 t ...

  • Cisco Systems 15454-FTF2 - page 180

    3-12 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapter 3 Electrical Cards 3.5.3 DS 1/E1 -56 Card-L eve l Indi cato rs Figur e 3-4 DS1 /E1 -56 F ace plat e and Blo ck Dia gra m 3.5.3 DS1/E1-56 Card -Level Indic ators The DS1/E 1-56 card has thre e card-le vel LED indica tors ( T able 3- 7 ). 131201 U B I C DS1 x56 por ts XFMR/ MUX DS1 An ...

  • Cisco Systems 15454-FTF2 - page 181

    3-13 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 3 Electrical Cards 3.5.4 DS1/E1- 56 Port-Leve l Indicat ors 3.5.4 DS1/E1-56 Port-L evel Indica tors Y ou can obt ain th e st atus of the D S1/E1-5 6 ca rd po rts by usi ng the LCD screen on t he ON S 15454 fan-tray assemb ly . Use the LCD to vi e w the status of any port or card s ...

  • Cisco Systems 15454-FTF2 - page 182

    3-14 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapter 3 Electrical Cards 3.6.1 DS3-12 an d DS3N -12 Slots and Co nnecto rs 3.6.1 DS3 -12 a nd DS3N-12 Slots and Co nnecto rs Y ou c an install the D S3-12 or DS3N-12 card in Slots 1 to 6 o r 12 t o 17 on the ONS 154 54. Each DS3-1 2 or DS3N-1 2 card port fea tures DSX- lev el outputs s up ...

  • Cisco Systems 15454-FTF2 - page 183

    3-15 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 3 Electrical Cards 3.6.3 DS3-12 a nd DS3N-12 Car d-Level Ind icators Figure 3-6 sho ws the DS3N -12 f acepla te and a blo ck diagr am of the card. Figur e 3-6 DS3N -12 F aceplat e and B lock Diagr am 3.6.3 DS3-12 and DS3N-1 2 Card-Leve l Indicators Ta b l e 3 - 8 descr ibes t he t ...

  • Cisco Systems 15454-FTF2 - page 184

    3-16 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapter 3 Electrical Cards 3.6.4 DS3-1 2 and DS3N -12 Port -Level Indi cators 3.6.4 DS3-12 and DS3N-1 2 Port-Lev el Indicators Y ou ca n f ind the stat us of the 12 DS3- 12 and 12 DS3N -12 card por ts by using the LCD scr een on the ONS 15454 fan-t ray assemb ly . Use th e LCD to view the s ...

  • Cisco Systems 15454-FTF2 - page 185

    3-17 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 3 Electrical Cards 3.7.2 DS3/EC1-48 Facepl ate and Block Diagr am Cautio n Do not i nstall a DS3/ EC1-48 c ard in Slots 1 or 2 if y ou have installe d an MX P_2.5G_ 10G ca rd in Sl ot 3. Likewise, do not install a DS3 /EC1-48 card in Slots 16 or 17 if you ha ve installe d an MXP_2 ...

  • Cisco Systems 15454-FTF2 - page 186

    3-18 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapter 3 Electrical Cards 3.7.3 DS 3/EC1 -48 C ard -Lev el I ndica tors Figu re 3-7 DS3/ EC1-48 Facepl ate and Bl ock Diag ram 3.7.3 DS3 /EC1 -48 Card -Lev el Indi cators The DS 3/EC1-4 8 card has thr ee card -lev el LE D indicato rs ( T abl e 3 -10 ). 115955 FAIL ACT/STBY SF DS3 EC1 48 Ma ...

  • Cisco Systems 15454-FTF2 - page 187

    3-19 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 3 Electrical Cards 3.7.4 DS3/EC1-48 Port- Level Ind icators 3.7.4 DS3/EC1-48 Port-Lev el Indica tors Y ou ca n obtain the st atus of the DS3/ EC1-48 ca rd ports by using t he LCD scree n on the ONS 15454 fan-tray assemb ly . Use the LCD to vi e w the status of any port or card slo ...

  • Cisco Systems 15454-FTF2 - page 188

    3-20 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapter 3 Electrical Cards 3.8.1 DS3i- N-12 Slot s and Connect ors Figu re 3-8 DS3i- N-1 2 Faceplate a nd Bl ock Dia gram The follo wing list summar izes the DS3i-N-12 card featu res: • Provisiona ble fram ing forma t (M23, C- bit, or unf ramed) • Autore cogniti on a nd pr ovisionin g o ...

  • Cisco Systems 15454-FTF2 - page 189

    3-21 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 3 Electrical Cards 3.8.2 DS3i-N-1 2 Card-Level Ind icators 3.8.2 DS3i-N-12 Card-Lev el Indicators T a ble 3 -11 descri bes the th ree LED s on the DS3i-N -12 card face plate. 3.8.3 DS3i-N-12 Por t-Level Indicators Y ou c an find the status o f th e DS3 i-N-12 card ports by usi ng ...

  • Cisco Systems 15454-FTF2 - page 190

    3-22 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapter 3 Electrical Cards 3.9.1 DS3-1 2E and DS 3N-12E Slots and Con nector s • FEBE monitoring • FEA C status and lo op code det ection • Path trace byte support with TIM -P alarm gene ration The DS 3-12E supp orts a 1:1 prot ection sc heme, m eaning it can o perate a s the pr otect ...

  • Cisco Systems 15454-FTF2 - page 191

    3-23 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 3 Electrical Cards 3.9.2 DS3-12E Facepl ate and Blo ck Diagram Figur e 3-9 DS3- 12E F aceplate and Bloc k Di agr am Figure 3-1 0 shows the DS3N-12E fac eplate and a bl ock diagra m of the card. 61349 B a c k p l a n e DS3 ASIC Flash uP bus SDRAM BTC ASIC Line Interface Unit #1 mai ...

  • Cisco Systems 15454-FTF2 - page 192

    3-24 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapter 3 Electrical Cards 3.9.3 DS 3-12E and DS3N-1 2E C ard- Level I ndi cat ors Figu re 3-1 0 DS 3N-12 E Facepl ate and B lock Di agram 3.9.3 DS3 -12E an d DS3N-12 E Card-L evel Ind icato rs T a ble 3 -12 descri bes t he thr ee card- lev el L EDs on the D S3-12E and D S3N-1 2E c ard face ...

  • Cisco Systems 15454-FTF2 - page 193

    3-25 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 3 Electrical Cards 3.9.4 DS3-12E and DS3N-12E Port-Leve l Indicat ors 3.9.4 DS3-12E and DS3 N-12E Po rt-Level Ind icato rs Y ou can find the status of t he DS3- 12E and DS3N -12E card ports by usi ng the LCD screen on t he ONS 15454 fa n-tr ay a ssemb ly . Use t he LCD t o qui ckl ...

  • Cisco Systems 15454-FTF2 - page 194

    3-26 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapter 3 Electrical Cards 3.10.3 DS3XM-6 Hosted By XCVT, XC10G, or XC-V XC-10G Figur e 3-1 1 DS3 XM-6 F acepla te and Bloc k Diagr am 3.10.3 DS3XM- 6 Hosted By XCVT, XC10G, or XC -VXC-10G The DS3XM-6 ca rd works in co njunction with th e XCVT card. A singl e DS3XM-6 can demultip lex six DS ...

  • Cisco Systems 15454-FTF2 - page 195

    3-27 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 3 Electrical Cards 3.10.5 DS3XM-6 Port- Level Ind icators 3.10.5 DS3XM-6 Port-Lev el Indica tors Y ou ca n f ind the stat us of the six DS3X M-6 card ports by using the LCD scre en on the ONS 154 54 fan -tray as sembl y . Use the LCD to quic kly vi e w the st atus of an y por t or ...

  • Cisco Systems 15454-FTF2 - page 196

    3-28 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapter 3 Electrical Cards 3.11. 2 P orted Mode The D S3XM- 12 sup ports t hree d ifferent b ackpl ane th roughp ut con figurations: • STS-48 wh en an XC10G or XC-VX C-10G c ard is use d. Thi s configurati on supp orts the O C-48 r ate in any slot. • STS-48 fo r th e Slots 5, 6, 12, and ...

  • Cisco Systems 15454-FTF2 - page 197

    3-29 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 3 Electrical Cards 3.11.5 P rotecti on Modes 3.11.5 Pr otectio n Modes The DS 3XM-12 c ard support s 1:1 and 1: N protect ion group s, where N <= 5. Howe ver , N <= 7 if one of the follo wing conditi ons is true: • Only port less co nnectio ns are us ed. • A combina tion ...

  • Cisco Systems 15454-FTF2 - page 198

    3-30 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapter 3 Electrical Cards 3.11.7 DS3 XM-12 Slot s and Conn ectors 3.11.7 DS3XM-12 Slots and Conn ectors The DS3X M-12 car d can be used with BNC, SMB, SCSI (UB IC), or MiniB NC EIA con nectors. The ca rd c an b e instal led in Slots 1 to 6 or 12 to 17. Ea ch D S3XM-12 port feat ures DSX-l ...

  • Cisco Systems 15454-FTF2 - page 199

    3-31 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 3 Electrical Cards 3.11.9 DS3XM-12 Card-Leve l Indicat ors Figur e 3-1 2 DS3XM -12 F aceplate and Bloc k Diag r am 3.11.9 DS3XM-12 Card-Lev el Indica tors T a ble 3 -16 descri bes the thre e card -le v el LEDs on the DS3XM- 12 card facepl ate. 115956 Main & Protect SCL Bus’ ...

  • Cisco Systems 15454-FTF2 - page 200

    3-32 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapter 3 Electrical Cards 3.11.10 DS3XM-12 Port-Lev el Indicator s 3.11.10 DS3XM-12 Port-L evel Indi cators Y ou c an find the status of the twel ve DS3XM-12 ca rd ports by using t he LCD scr een on th e ONS 154 54 fan -tray as sembl y . Use the LCD to quic kly vi e w the st atus of an y p ...

  • Cisco Systems 15454-FTF2 - page 201

    CH A P T E R 4-1 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 4 Opti cal Car ds Note Th e terms "Unidire ctiona l Path Switched Ri ng" and " UPSR" may appear in Ci sco liter ature. These t erms do not refer t o using Cisc o ONS 15xxx prod ucts in a unid irecti onal path sw itched ring configuratio n. Rather , these te ...

  • Cisco Systems 15454-FTF2 - page 202

    4-2 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapter 4 Optical C ards 4.1 Optica l Car d Ove rview • 4.20 O C192SR1 /STM64I O Short R each a nd OC 192/STM 64 Any Re ach Ca rds, page 4- 50 • 4.21 Optical Ca rd SFPs and XFPs, page 4-52 4.1 Optic al Card Overview Each ca rd is marke d with a symbo l that co rresponds t o a slot (o r s ...

  • Cisco Systems 15454-FTF2 - page 203

    4-3 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 4 Optical Cards 4.1.1 Card Summary OC12 LR/STM4 LH 1550 The OC12 LR/ST M4 LH 1550 card p rovides one long- range O C-12 port and operat es a t 1550 nm . See the “4.6 OC1 2 LR/STM4 LH 15 50 Ca rd” section on pa ge 4-13 . OC12 IR/STM4 SH 1310-4 The OC12 IR/STM 4 SH 13 10-4 card p ...

  • Cisco Systems 15454-FTF2 - page 204

    4-4 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapter 4 Optical C ards 4.1.2 Car d Compa tibili ty Note The Cisco OC3 IR/ST M1 SH, OC12 IR/STM4 SH, and O C48 IR/STM 16 SH inte rface o ptics, a ll working at 131 0 n m, a re opt imized for the most w idely used SMF-28 fiber , av ailable from m any suppliers . Corning MetroCor f iber is op ...

  • Cisco Systems 15454-FTF2 - page 205

    4-5 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 4 Optical Cards 4.1.2 Card Compatibility T able 4-2 Optical C ard Sof tw ar e Release Compatibility Optical Ca rd R3.3 R3.4 R4.0 R4.1 R 4.5 1 1. DWDM-only releas e. R4.6 R4.7 1 R5.0 R6.0 R7.0 R7.2 R8. 0 8.5 OC3 IR 4 1310 Y es Y es Y es Y es — Y es — Y es Y es Y es Y es Y e s Y ...

  • Cisco Systems 15454-FTF2 - page 206

    4-6 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapter 4 Optical C ards 4.2 OC3 IR 4 /STM1 SH 1 310 Ca rd 4.2 OC3 IR 4/STM1 SH 1310 Card Note For hardwa re spec ifications, se e the “ A.6.1 OC3 IR 4/STM 1 SH 131 0 Car d Speci fications” secti on on page A-2 8 . See T able 4-2 on page 4-5 for optical c ard co mpatibility . The OC3 IR ...

  • Cisco Systems 15454-FTF2 - page 207

    4-7 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 4 Optical Cards 4.2.1 OC3 IR 4/STM1 SH 1310 Card- Level Indicat ors Y ou ca n install the OC3 IR 4/STM 1 SH 1310 ca rd in Slots 1 to 6 an d 12 to 17. Th e card ca n be provisione d as part of a pa th protec tion or a lin ear ad d/drop mu ltiplexer (ADM ) configur ation. Ea ch inter ...

  • Cisco Systems 15454-FTF2 - page 208

    4-8 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapter 4 Optical C ards 4.3 OC3 IR/ STM1 S H 13 10-8 C ard 4.3 OC3 IR/STM1 SH 1310-8 Card Note For hard ware sp ecif ications , see th e “ A .6.2 OC3 I R/STM 1SH 131 0-8 Ca rd Sp ecifications ” secti on on page A-2 9 . See T able 4-2 on page 4-5 for optical card co mpatibility . The OC ...

  • Cisco Systems 15454-FTF2 - page 209

    4-9 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 4 Optical Cards 4.3.1 OC3 IR/STM1 SH 1310- 8 Card-Level Ind icators Y ou can install the OC3 IR/STM1 SH 1 310-8 card i n Slot s 1 to 4 an d 14 t o 17 . Th e card can be provisione d as part of a pa th prote ction or an A DM co nfiguration . Each interface feature s a 1310-n m laser ...

  • Cisco Systems 15454-FTF2 - page 210

    4-10 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapter 4 Optical C ards 4.4 OC12 I R/STM4 SH 1310 Card The OC12 IR /STM 4 SH 1310 card pr ovides one inte rmedia te or short ra nge SONET OC -12 port comp liant w ith IT U-T G.707, ITU-T G. 957, and T e lcordia GR- 253-CORE . The por t oper ates a t 622.08 M bps over a single-m ode fiber s ...

  • Cisco Systems 15454-FTF2 - page 211

    4-11 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 4 Optical Cards 4.4.1 OC12 IR/STM4 SH 1310 Card-Leve l Indicat ors The OC12 IR /STM 4 SH 1310 detect s LOS, LOF , LOP , AIS-L, and RDI- L conditi ons. Refer to the Cisco ONS 15454 T r oubl eshooting Guide for a d escription of the se con ditions. The c ard al so count s section a ...

  • Cisco Systems 15454-FTF2 - page 212

    4-12 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapter 4 Optical C ards 4.5 OC12 LR/ STM4 LH 1310 C ard War ni n g The laser is on when the optical card is booted. T he port does not have to be in service for t he laser to be on. Statement 293 Note Th e OC12 LR 1310 and OC12 LR /STM 4 LH 1310 cards are fu nction ally t he same. Figur e ...

  • Cisco Systems 15454-FTF2 - page 213

    4-13 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 4 Optical Cards 4.5.1 OC12 LR/STM4 LH 1310 Card-Level Indicators 4.5.1 OC12 LR/STM4 L H 131 0 Card-Leve l Indic ators Ta b l e 4 - 6 describe s the thre e card- lev el LEDs on the OC12 LR /STM 4 LH 1310 card. 4.5.2 OC12 LR/STM4 L H 131 0 Port-Lev el Indica tors Y ou can find the s ...

  • Cisco Systems 15454-FTF2 - page 214

    4-14 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapter 4 Optical C ards 4.6.1 OC12 LR/ STM4 LH 1 550 Ca rd-Le vel In dica tors Figur e 4-5 OC12 LR/S TM4 LH 1550 F aceplat e and Bloc k Diagr am Y ou ca n install th e OC12 LR /STM4 LH 1550 card in Slots 1 to 4 and 14 to 17. The OC12 LR /STM4 LH 1550 can be provisio ned as part of a t wo-f ...

  • Cisco Systems 15454-FTF2 - page 215

    4-15 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 4 Optical Cards 4.6.2 OC12 LR/STM 4 LH 1550 Port-Level Ind icators 4.6.2 OC12 LR/STM4 L H 155 0 Port-Lev el Indica tors Y ou can find the sta tus of the O C12 L R/ST M4 L H 1550 card port by u sing the LC D sc reen on the ONS 15454 fan-t ray assemb ly . Use th e LCD to view the st ...

  • Cisco Systems 15454-FTF2 - page 216

    4-16 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapter 4 Optical C ards 4.7 OC12 I R/STM4 SH 1310 -4 Car d Figur e 4-6 OC12 IR/S TM4 SH 131 0-4 F ace plat e and Bl ock D iagr am Y ou ca n install th e OC12 IR/STM4 SH 13 10-4 card in Slo ts 1 to 4 and 14 to 17. Ea ch interfa ce featur es a 1310 -nm la ser an d conta ins a tra nsmit an d ...

  • Cisco Systems 15454-FTF2 - page 217

    4-17 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 4 Optical Cards 4.7.1 OC12 IR/STM4 SH 1310- 4 Card-Level Ind icators 4.7.1 OC1 2 IR/STM4 S H 1310-4 Card-Level Ind icators Ta b l e 4 - 8 describe s the three card-level LEDs on the O C12 IR/STM 4 SH 1310-4 card. 4.7.2 OC1 2 IR/STM4 S H 1310 -4 Port-Lev el Indi cators Y ou ca n f ...

  • Cisco Systems 15454-FTF2 - page 218

    4-18 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapter 4 Optical C ards 4.8.1 OC 48 IR 1 310 Ca rd-L evel Indic ato rs Figu re 4-7 O C48 I R 131 0 Faceplate and Bl ock Dia gram Y ou can i nstall the OC48 IR 1310 ca rd in Slots 5, 6, 12, and 13, a nd provision the card as a drop or spa n card in a two-fiber or four-fiber BLSR, path prot ...

  • Cisco Systems 15454-FTF2 - page 219

    4-19 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 4 Optical Cards 4.8.2 OC48 IR 1310 Port-Leve l Indicat ors 4.8.2 OC48 IR 1310 Port-L evel Indica tors Y ou ca n f ind the stat us of the OC4 8 IR 1310 card por t by using the LCD scree n on the ONS 15454 fan-tray assemb ly . Use the LCD to vi e w the status of any port or card slo ...

  • Cisco Systems 15454-FTF2 - page 220

    4-20 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapter 4 Optical C ards 4.9.1 OC 48 LR 1 550 Ca rd-L evel Indic ator s Figur e 4-8 OC48 LR 1550 F ace plat e and Bl ock Dia gr am Y ou can in stall OC4 8 LR 1550 card s in Slots 5, 6, 12, and 13 and provision the ca rd as a drop or span card in a two-fiber or four-fiber BLSR, path prot ect ...

  • Cisco Systems 15454-FTF2 - page 221

    4-21 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 4 Optical Cards 4.9.2 OC48 LR 1550 Port-Leve l Indicat ors 4.9.2 OC48 LR 1550 Port-Leve l Indicators Y ou can find the stat us of t he OC4 8 LR 1550 c ard po rt by usin g th e LCD screen on t he ON S 1 5454 fan-tray assemb ly . Use the LCD to vi e w the status of any port or card ...

  • Cisco Systems 15454-FTF2 - page 222

    4-22 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapter 4 Optical C ards 4.10. 1 OC48 IR /STM16 S H AS 1 310 Ca rd-Le vel In dicat ors Figur e 4-9 OC48 IR/S TM16 SH AS 131 0 F acep late and Bloc k Diag ram Y ou ca n instal l the O C48 IR/S TM16 SH AS 1310 card i n Slots 1 to 6 and 12 to 17 and provision the card as a drop or span ca rd i ...

  • Cisco Systems 15454-FTF2 - page 223

    4-23 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 4 Optical Cards 4.10.2 OC48 IR/STM 16 SH AS 1310 Port-Level Ind icators 4.10.2 OC48 IR/STM16 SH A S 1310 Port-Lev el Indicato rs Y ou can find t he stat us of the OC 48 I R/STM16 SH AS 131 0 card port by us ing t he LCD sc reen on the ONS 15454 fan-t ray assemb ly . Use th e LCD t ...

  • Cisco Systems 15454-FTF2 - page 224

    4-24 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapter 4 Optical C ards 4.11 .1 OC48 LR /STM 16 LH A S 1550 Card -Leve l Indicat ors Figur e 4-1 0 OC48 LR/ S TM16 LH A S 15 50 F aceplate and Bloc k Diag ram Y ou c an insta ll OC4 8 LR/STM 16 LH AS 1 550 card s in Slot s 1 to 6 and 12 to 17 an d provisi on the card as a drop or span ca r ...

  • Cisco Systems 15454-FTF2 - page 225

    4-25 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 4 Optical Cards 4.11.2 OC48 LR/STM16 LH AS 1550 Port-Leve l Indicat ors 4.11.2 OC48 LR/STM16 LH AS 1550 Po rt-Level Ind icator s Y ou ca n find the status of the OC48 LR /STM16 L H AS 1550 card port by using the LCD sc reen on th e ONS 15454 fan-t ray assemb ly . Use th e LCD to v ...

  • Cisco Systems 15454-FTF2 - page 226

    4-26 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapter 4 Optical C ards 4.12 OC48 E LR/S TM16 E H 100 GHz Car ds Figur e 4-1 1 OC48 ELR/S TM16 EH 1 00 GHz F aceplate a nd Bloc k Diagr am Ninete en o f the card s ope rate in the blue band with sp acing of 10 0 GH z on t he ITU gr id ( 1528.7 7 nm, 1530.33 nm, 1 531.12 nm, 15 31.90 nm, 15 ...

  • Cisco Systems 15454-FTF2 - page 227

    4-27 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 4 Optical Cards 4.12.1 OC48 ELR 100 GHz Card-Leve l Indicat ors ONS 15216 100-GHz fil ters, the link b udget is reduced by the inser tion loss of the filte rs plus an additional 2-dB po wer penalty . The wa v elength st ability of the OC4 8 ELR/STM16 E H 100 GH z cards is +/– 0. ...

  • Cisco Systems 15454-FTF2 - page 228

    4-28 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapter 4 Optical C ards 4.13 OC48 E LR 20 0 GHz Ca rds Figur e 4-1 2 OC48 ELR 200 GHz F aceplat e and Blo c k Diagr am Nine of the cards oper ate in the blue band with spa cing of 200 GHz on the ITU gri d (1530 .33 nm, 1531.90 nm, 1 533.47 nm, 15 35.04 nm, 1536.6 1 n m, 1538. 19 nm, 1539.7 ...

  • Cisco Systems 15454-FTF2 - page 229

    4-29 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 4 Optical Cards 4.13.1 OC48 ELR 200 GHz Card-Leve l Indicat ors The OC48 ELR 200 GHz c ards suppo rt extended long -rea ch applic ations in conjunct ion with optical amplificat ion. U sing elec tro-abso rption tech nology , the OC48 DWDM cards provide a solu tion at th e lower ext ...

  • Cisco Systems 15454-FTF2 - page 230

    4-30 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapter 4 Optical C ards 4.14. 1 OC19 2 SR/ STM64 IO 13 10 Ca rd-Le vel In dicat ors War ni n g The laser is on when the optical card is booted. T he port does not have to be in service for t he laser to be on. Statement 293 Figure 4-1 3 shows the OC192 SR/ STM 64 IO 1 310 fac eplate and bl ...

  • Cisco Systems 15454-FTF2 - page 231

    4-31 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 4 Optical Cards 4.14.2 OC192 SR/STM64 IO 1310 Po rt-Level Ind icators 4.14.2 OC19 2 SR/ST M64 IO 131 0 Port-Lev el Indica tors Y ou ca n find the status of the OC1 92 SR/STM 64 IO 1310 ca rd port s by using the LCD sc reen on the ONS 15454 fan-t ray assemb ly . Use th e LCD to vie ...

  • Cisco Systems 15454-FTF2 - page 232

    4-32 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapter 4 Optical C ards 4.15. 1 OC19 2 IR/S TM64 SH 1550 Card -Leve l Ind icato rs Figur e 4-1 4 OC1 92 IR/S TM64 SH 1550 F aceplat e and Block Diagr am Note Y o u must use a 3 to 15 dB fiber att enuato r (5 dB recomm ende d) when working with th e OC192 I R/STM 64 SH 1 550 c ard in a loo ...

  • Cisco Systems 15454-FTF2 - page 233

    4-33 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 4 Optical Cards 4.15.2 OC192 IR/STM64 SH 1550 Port- Level Ind icators 4.15.2 OC19 2 IR/STM64 SH 1550 P ort-Lev el Indicat ors Y ou ca n find the status of the OC1 92 IR/ST M64 SH 155 0 card ports by using the LC D screen on the ONS 15454 fan-t ray assemb ly . Use th e LCD to view ...

  • Cisco Systems 15454-FTF2 - page 234

    4-34 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapter 4 Optical C ards 4.16 OC192 LR/S TM64 LH 1550 Card Note Y o u can differenti ate thi s OC-192 /STM-64 card (15 454-OC19 2-LR2, 15454E -L64.2-1 ) from th e OC-192/ STM-64 c ard wit h the pr oduct ID 15 454-O C192L R1550 by looki ng at t he facepl ate. Thi s card does not have a laser ...

  • Cisco Systems 15454-FTF2 - page 235

    4-35 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 4 Optical Cards 4.16 OC192 LR/STM64 LH 1550 Card Figur e 4-1 6 Enlar ged Sectio n of the O C192 LR/S TM64 LH 1550 (15 454-OC1 92LR 1550) F aceplat e Figure 4-1 7 shows the OC192 LR/ STM64 L H 1550 (1545 4-OC1 92-LR 2) faceplat e and a bloc k diagra m of the card . D ANGER - INVISI ...

  • Cisco Systems 15454-FTF2 - page 236

    4-36 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapter 4 Optical C ards 4.16 OC192 LR/S TM64 LH 1550 Card Figur e 4-1 7 OC1 92 LR/S TM64 LH 1550 (15454-O C192-L R2) F aceplate a nd Bloc k Diagr am Figure 4-1 8 shows an enlarged view of the faceplat e warning on 15454-OC19 2LR155 0. Demux CDR Flash SRAM Optical transceiver ADC x 8 Mux BT ...

  • Cisco Systems 15454-FTF2 - page 237

    4-37 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 4 Optical Cards 4.16 OC192 LR/STM64 LH 1550 Card Figur e 4-1 8 Enlar g ed Sectio n of the O C1 92 LR/S TM64 LH 1550 (15 454-OC1 92-L R2) F a ceplat e Cautio n Y ou m ust use a 19 to 24 dB (14 to 28 dB for 15454- OC192 -LR2) (2 0 dB re comm ended) fiber attenu ator when co nnec tin ...

  • Cisco Systems 15454-FTF2 - page 238

    4-38 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapter 4 Optical C ards 4.16. 1 OC19 2 LR/S TM64 LH 155 0 Card- Lev el I ndicato rs The card p ort featur es a 1550- nm la ser and cont ains a tran smit a nd re ceive conne ctor ( labele d) on the card face plate. The card uses a dual SC connect or for opti cal cabl e termina tion. The car ...

  • Cisco Systems 15454-FTF2 - page 239

    4-39 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 4 Optical Cards 4.17 OC192 LR/STM64 LH ITU 15xx.xx Card Sixteen dist inct OC- 192/ST M-64 ITU 100 GHz DWDM cards co mprise t he ONS 154 54 DWDM chan nel plan. Eac h OC192 L R/STM64 LH ITU 15xx. xx card provid es one long- reach STM -64/O C-192 por t per card, comp liant with ITU-T ...

  • Cisco Systems 15454-FTF2 - page 240

    4-40 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapter 4 Optical C ards 4.17. 1 OC19 2 LR/S TM64 LH ITU 1 5xx. xx Car d-Lev el Ind icato rs Figur e 4-2 0 OC1 92 LR/ ST M64 LH IT U 15x x.xx Bloc k Dia gra m Note Y o u must use a 20-d B fiber at tenuat or (1 5 to 25 dB) when working wit h the OC192 L R/STM 64 L H 15 xx.xx c ard in a l oop ...

  • Cisco Systems 15454-FTF2 - page 241

    4-41 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 4 Optical Cards 4.17.2 OC192 LR/STM64 LH ITU 15 xx.xx Port-Leve l Indicat ors 4.17.2 OC19 2 LR/STM6 4 LH ITU 15xx.x x Port-L evel Indic ators Y ou ca n find the status of the OC1 92 LR/ST M64 LH ITU 15xx.x x card ports by using the LC D screen on the ONS 15454 fan-tray ass embly . ...

  • Cisco Systems 15454-FTF2 - page 242

    4-42 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapter 4 Optical C ards 4.18. 1 Sl ot C ompatib ili ty by Cros s-Conn ect C ard Figur e 4-2 1 1545 4_MRC-12 Card F acep lat e and Blo c k Diagr am 4.18.1 Slot Compatibility by Cross-Connect Card Y ou can in stall 1545 4_MRC- 12 cards in Slots 1 throu gh 6 and 12 th rough 17 with an XCVT , ...

  • Cisco Systems 15454-FTF2 - page 243

    4-43 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 4 Optical Cards 4.18.2 Ports and Line Rates The ma ximum bandw idth of the 15454_M RC-12 card is de termin ed by t he cro ss-connec t ca rd, as shown in T able 4 -19 . 4.18.2 Ports and L ine Rate s Each p ort on the 15454 _MRC-12 card can b e co nfigured as OC- 3/STM -1, OC-12 /ST ...

  • Cisco Systems 15454-FTF2 - page 244

    4-44 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapter 4 Optical C ards 4.18. 2 Por ts an d Line Rate s – If Port 10 is use d as an OC-3 , Ports 9, 11, an d 12 can be used as an OC-3 or OC-12. – Any port can be used as an OC-12 or OC- 3, as long as all of the abo v e rules ar e follo wed. T a ble 4 -20 shows the 15454_MRC -12 port a ...

  • Cisco Systems 15454-FTF2 - page 245

    4-45 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 4 Optical Cards 4.18.3 15454_MRC-1 2 Card-Level Ind icators 4.18.3 15454_MR C-12 Card-L evel In dicators T a ble 4 -21 descr ibes the three c ard-l e vel LEDs on the 15454 _MRC-12 card. STS-192 A v ailable Band wid th (when installing additi onal SFPs from the t op port to the bot ...

  • Cisco Systems 15454-FTF2 - page 246

    4-46 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapter 4 Optical C ards 4.18. 4 15 454_ MRC-12 Port -Leve l In dicat ors 4.18.4 15454_MR C-12 Port-Leve l Indicato rs Each p ort has an Rx i ndicato r . The LED fl ashe s gree n if t he port is rec ei ving a signal, and it flashes red if the p ort is not recei v ing a sig nal. Y ou c an al ...

  • Cisco Systems 15454-FTF2 - page 247

    4-47 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 4 Optical Cards 4.19 MRC-2.5G-4 Multirate Card Note 1+ 1 protec tion m ust be configured b etween the sa me eq uipment type, using the sam e por t numbe r and line rate . Note Lo nger distan ces ar e possibl e in an ampli fied system using dispersion co mpensat ion. Figure 4-2 2 s ...

  • Cisco Systems 15454-FTF2 - page 248

    4-48 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapter 4 Optical C ards 4.19. 1 Sl ot C ompatib ili ty by Cros s-Conn ect C ard 4.19.1 Slot Compatibility by Cross-Connect Card Y ou ca n install MRC -2.5G-4 cards in Slots 1 throu gh 6 and 12 th rough 17 wi th an XCVT , X C10G, or XC-VXC- 10G. Note The MRC-2.5G-4 card supports a n errorle ...

  • Cisco Systems 15454-FTF2 - page 249

    4-49 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 4 Optical Cards 4.19.3 MRC -2.5G-4 Card-Leve l Indicat ors T a ble 4 -23 shows th e 15454_MRC-4 por t av ailability and line ra te for each po rt, based on to tal a v ailable bandwidth . T o use the table , go to the ro ws for the bandwidth tha t you ha v e a v ailable, as determi ...

  • Cisco Systems 15454-FTF2 - page 250

    4-50 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapter 4 Optical C ards 4.20 OC19 2SR1/STM6 4IO Short Reach and OC192/S TM64 An y Reach Car ds 4.20 OC19 2SR1/STM64IO Short Re ach and OC192/STM64 Any Reach Cards Note For hard ware sp ecif ications , see th e “ A .6.1 9 OC19 2SR1/ST M64IO Short Rea ch Card Speci fications” section on ...

  • Cisco Systems 15454-FTF2 - page 251

    4-51 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 4 Optical Cards 4.20 OC192SR1/STM6 4IO Short Reach a nd OC192/STM64 Any Reach Cards Figu re 4 -23 OC192SR1 /STM64 IO S hort Re ach and OC 192/STM6 4 Any Reach Ca rd F ace plates and Bloc k Diagr am The card s’ spans depe nd on the XFP modu le that is used: • A card using the S ...

  • Cisco Systems 15454-FTF2 - page 252

    4-52 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapter 4 Optical C ards 4.20.1 OC1 92SR1/STM 64IO Sho rt Reach and O C192/STM 64 Any Re ach Card-L evel Indic ators 4.20.1 OC192SR1/STM6 4IO Short Reac h and OC192/STM 64 Any Re ach Card-L evel In dicators T a ble 4 -25 describ es the t hree ca rd-lev el LEDs on t he OC19 2SR1/STM 64IO Sho ...

  • Cisco Systems 15454-FTF2 - page 253

    4-53 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 4 Optical Cards 4.21.1 Compatibility by Card SFPs that are LED based d o not s upport the Optical power transmitted (OPT) a nd laser bias c urrent (LBC) op tical parame ters. T able 4-27 lists the LED based SFPs. T able 4-26 SFP and XFP Car d Comp atibilit y Card Compatible SFPs a ...

  • Cisco Systems 15454-FTF2 - page 254

    4-54 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapter 4 Optical C ards 4.21. 2 SFP Descr ipt ion 4.21.2 SFP Description SFPs are i ntegrated f iber optic transceiv ers that pr ovide high-speed serial links from a port or slot to t he networ k. V arious latching m echanisms ca n be u tilized on the modules. There is no correl ation b et ...

  • Cisco Systems 15454-FTF2 - page 255

    4-55 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 4 Optical Cards 4.21.3 XFP Description • Heigh t 0.03 in. (8 .5 mm) • W idth 0.53 i n. (13 .4 mm) • Depth 2. 22 in. (56. 5 mm) SFP temperature r anges are: • COM—C ommerc ial o perat ing temp erat ure r ange: 23 t o 158 degrees Fa hrenhei t (–5 to 70 degrees Cels iu s) ...

  • Cisco Systems 15454-FTF2 - page 256

    4-56 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapter 4 Optical C ards 4.21. 4 PP M Provi sion ing • W idth 0.72 i n. (18 .3 mm) • Depth 3.1 i n. (78 m m) XFP te mperat ure range s are: • COM—C ommerc ial o perat ing temp erat ure r ange: 23 t o 158 degrees Fa hrenhei t (–5 to 70 degrees Cels iu s) • EXT—Ex tend ed oper a ...

  • Cisco Systems 15454-FTF2 - page 257

    CH A P T E R 5-1 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 5 Ethernet Cards Note Th e terms "Unidire ctiona l Path Switched Ri ng" and " UPSR" may appear in Ci sco liter ature. These t erms do not refer t o using Cisc o ONS 15xxx prod ucts in a unid irecti onal path sw itched ring configuratio n. Rather , these ter ...

  • Cisco Systems 15454-FTF2 - page 258

    5-2 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Ch apter 5 Eth ern et C ards 5.1 Ethernet Card Overvie w 5.1 Eth ernet Card Ove rview The card overview section summ arizes the Eth ernet c ard funct ions and prov ides the software compatibilit y for e ach car d. Note Ea ch card is marked with a symbol that corre sponds to a sl ot (or sl ot ...

  • Cisco Systems 15454-FTF2 - page 259

    5-3 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 5 Ethernet Cards 5.1.2 Card Compatibility 5.1.2 Card Compatibility Ta b l e 5 - 2 lists the CTC software compatibilit y for each Ethernet car d. Note “Y es” indicates that this card is ful ly or partially supporte d by the indicate d software rele ase. Refer to the indi vidual ...

  • Cisco Systems 15454-FTF2 - page 260

    5-4 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Ch apter 5 Eth ern et C ards 5.2 E100 T-12 Card 5.2 E100 T-12 Card Note For hard ware sp ecif ications , see th e “ A .7.1 E100T -12 Card Specificati ons” sectio n on page A-48 . The ONS 15454 uses E100 T -12 card s for Et hern et (1 0 Mbp s) and Fast Ethe rnet (100 M bps). Each card pro ...

  • Cisco Systems 15454-FTF2 - page 261

    5-5 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 5 Ethernet Cards 5.2.1 Slot Compatibility Figur e 5-1 E1 00T -12 F ace plat e and Blo c k Diagr am The E100T -12 E therne t card provide s high-th roughp ut, low-latency pa cket switchi ng of Ethe rnet traffic across a SONET network while pro viding a greater degree of reliability ...

  • Cisco Systems 15454-FTF2 - page 262

    5-6 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Ch apter 5 Eth ern et C ards 5.2.2 E100 T-12 Card-L evel Indi cators Note When making an STS-1 2c Ethern et circuit, the E-Serie s cards mu st be conf igur ed as single- card Ether Switch. 5.2.2 E1 00T- 12 Card -Level In dicat ors The E1 00T -12 card face plate has two ca rd-level LED indic ...

  • Cisco Systems 15454-FTF2 - page 263

    5-7 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 5 Ethernet Cards 5.3 E100T- G Card The ONS 15454 uses E10 0T -G card s for Ethern et (10 Mbp s) and Fast Eth ernet (100 Mbps). Ea ch card provides 12 switche d, IEEE 80 2.3-c ompli ant, 10/ 100Bas eT Ethe rnet po rts that can ind epend ently detect the spe ed of an atta ched device ...

  • Cisco Systems 15454-FTF2 - page 264

    5-8 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Ch apter 5 Eth ern et C ards 5.3.1 Slo t Compat ibil ity 5.3.1 Slot Compatibility Y ou ca n install the E100T -G car d in Slots 1 to 6 and 12 to 17. Multip le E- Series Ethe rnet cards insta lled in an ONS 15 454 c an act indepe ndently or a s a sing le Et hernet switc h. Y ou can cre ate lo ...

  • Cisco Systems 15454-FTF2 - page 265

    5-9 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 5 Ethernet Cards 5.4 E1000-2 Card 5.4 E100 0-2 Card Note For hard ware sp ecif ications , see th e “ A .7.3 E1000-2 Card Spe cifications” sect ion on page A-49 . The ON S 1 5454 us es E10 00-2 car ds for Gi gabit Et hern et (100 0 Mbps). T he E 1000-2 ca rd provi des two IEEE-c ...

  • Cisco Systems 15454-FTF2 - page 266

    5-10 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Ch apter 5 Eth ern et C ards 5.4.1 Slo t Compat ibil ity Each E1000- 2 card suppor ts standa rds-b ased, L ayer 2 Ethe rnet swit ching betwee n its Ethern et int erfaces and SONE T interfac es on the ONS 15454. Th e IEEE 802. 1Q VLA N tag log ically isolates t raff ic (typi cally subscr ibe ...

  • Cisco Systems 15454-FTF2 - page 267

    5-11 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 5 Ethernet Cards 5.4.4 Cross-Connect Compatibility 5.4.4 Cross-Connect Compatibility The E1 000-2 is compatib le wit h XCVT ca rds. Th e XC10G and XC- VXC-10 G cards re quire th e E100 0-2-G ca rd. 5.5 E100 0-2-G Card Note For hard ware sp ecif ications , see th e “ A .7.4 E1000 ...

  • Cisco Systems 15454-FTF2 - page 268

    5-12 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Ch apter 5 Eth ern et C ards 5.5 E100 0-2-G Card Figur e 5-4 E1 00 0-2-G F aceplate an d Bloc k Dia gram The E1 000-2- G Gigabit Et hern et card provides high- thro ughput, l ow-latency packet swit ching of Etherne t traff ic across a SONET netw ork while provi ding a greate r degree of rel ...

  • Cisco Systems 15454-FTF2 - page 269

    5-13 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 5 Ethernet Cards 5.5.1 E100 0-2-G Card-Leve l Indicat ors Y ou can create logical SONET ports b y prov isioning STS channels to th e packet switch enti ty within the ONS 15454. Logica l ports can be cre ated with a ba ndwidth granul arity of STS-1 . The ONS 154 54 supports STS- 1, ...

  • Cisco Systems 15454-FTF2 - page 270

    5-14 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Ch apter 5 Eth ern et C ards 5.6 G1000- 4 Car d 5.6 G1000-4 Card The G1 000-4 card requir es the XC10G c ard. T he ON S 15454 uses G 1000- 4 cards f or Giga bit Et hernet (1000 Mbps) . The G 1000-4 car d provides fo ur ports of IEE E-comp liant, 1000-Mb ps interface s. Each port suppor ts f ...

  • Cisco Systems 15454-FTF2 - page 271

    5-15 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 5 Ethernet Cards 5.6.1 STS-24c Restr iction switches (such as 1+1 au tomatic pro tectio n switching [A PS], path protection c onfiguration , or bidirect ional line switch ring [BLS R]). Full provisioni ng support is possible throu gh Cisco Transport Controll er (C TC), Transacti o ...

  • Cisco Systems 15454-FTF2 - page 272

    5-16 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Ch apter 5 Eth ern et C ards 5.6.4 Slo t Compat ibil ity 5.6.4 Slot Compatibility The G 1000-4 card require s Cisco ON S 1545 4 Rele ase 3.2 or l ater sys tem sof tware and th e X C10G cross-connect card. Y ou can install the card in Slots 1 to 6 and 12 to 17, for a total shelf capacity of ...

  • Cisco Systems 15454-FTF2 - page 273

    5-17 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 5 Ethernet Cards 5.7.1 STS-24c Restr iction Figur e 5-6 G1K-4 F ace plat e and Blo ck D iagr am The G1K -4 Gigabit Ethern et card provides hi gh-throu ghput , low-latency tran sport of Ethernet encapsu late d traffic (IP an d ot her La yer 2 or La yer 3 protoc ols) a cross a SONET ...

  • Cisco Systems 15454-FTF2 - page 274

    5-18 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Ch apter 5 Eth ern et C ards 5.7.2 G1K- 4 Comp atibi lity If STS-24c ci rcuits ar e not being dro pped on th e card, the ful l 48 STSs bandwid th can be used with no restric tions (fo r example , usin g eithe r a singl e STS-48 c or 4 STS- 12c circ uits). Note Th e STS-24c re strictio n onl ...

  • Cisco Systems 15454-FTF2 - page 275

    5-19 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 5 Ethernet Cards 5.8 ML1 00T-12 Ca rd 5.8 ML100T-12 Card Note For hard ware sp ecif ications , see th e “ A .7.9 ML 100T -12 Car d Spec ifications” section on p age A-51 . The ML10 0T -12 card provide s 12 ports of IEE E 802.3- complia nt, 10/1 00 inter faces. Each int erface ...

  • Cisco Systems 15454-FTF2 - page 276

    5-20 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Ch apter 5 Eth ern et C ards 5.8.1 ML100T-1 2 Card-Leve l Indicat ors Figur e 5-7 M L1 0 0T -12 F acepla te and Bloc k Diagr am The card fe ature s two vi rtual p acket over SONE T (POS ) por ts with a maxi mum combin ed ba ndwidt h of STS-48. T he ports function in a ma nner si milar to O ...

  • Cisco Systems 15454-FTF2 - page 277

    5-21 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 5 Ethernet Cards 5.8.2 ML100T-12 Port- Level Ind icators 5.8.2 ML 100T-1 2 Port -L evel Indica tors The ML1 00T -12 card pro vides a pair of LE Ds for eac h Fast Ethe rnet por t: an amber LED for acti vity (A CT) and a green LE D for LI NK. The port -le v el indic ators are d escr ...

  • Cisco Systems 15454-FTF2 - page 278

    5-22 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Ch apter 5 Eth ern et C ards 5.9.1 ML10 0X-8 Card-L evel Indi cators Figu re 5-8 ML1 00X -8 Facepl ate and B lock Di ag ram The card fe ature s two vi rtual p acket over SONE T (POS ) por ts with a maxi mum combin ed ba ndwidt h of STS-48. T he ports function in a ma nner si milar to O C-N ...

  • Cisco Systems 15454-FTF2 - page 279

    5-23 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 5 Ethernet Cards 5.9.2 ML100X-8 Port- Level Ind icators 5.9.2 ML100X-8 Port-L evel Indicators The ML100X -8 c ard prov ides a pair of LE Ds f or eac h Fast E thern et po rt: an amb er L ED fo r activity (A CT) and a gree n LED fo r LINK. T a ble 5 -18 describes th e port-l evel in ...

  • Cisco Systems 15454-FTF2 - page 280

    5-24 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Ch apter 5 Eth ern et C ards 5.10. 1 ML 1000- 2 Card -Leve l In dicat ors Figu re 5-9 M L1 00 0- 2 Faceplate and Bl ock Dia gram The card fe ature s two vi rtual p acket over SONE T (POS ) por ts with a maxi mum combin ed ba ndwidt h of STS-48. T he ports function in a ma nner si milar to O ...

  • Cisco Systems 15454-FTF2 - page 281

    5-25 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 5 Ethernet Cards 5.10.2 ML1000-2 Port- Level Ind icators 5.10.2 ML1000-2 Port-L evel Ind icators The ML 1000- 2 card has thr ee LED s for each of the two Giga bit Eth ernet ports, descr ibed i n T able 5 -20 . 5.10.3 Cross-Connect and Slot Compatibility The ML 1000- 2 card is co m ...

  • Cisco Systems 15454-FTF2 - page 282

    5-26 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Ch apter 5 Eth ern et C ards 5.11 ML-MR-10 Card T o configure a ML- MR-10 card SONET STS circuit , refer to the “Creat e Circuits and T unnels” cha pter in the Cisco O NS 15 454 P r ocedur e Guid e. Cisco IOS is used to provision t he Layer 2 func tions of th e card. Th e ML-MR- 10 car ...

  • Cisco Systems 15454-FTF2 - page 283

    5-27 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 5 Ethernet Cards 5.11.1 ML-MR-1 0 Card-Leve l Indicat ors The ML-M R-10 car d support s an Ether net V i rtual Conne ction (EVC), wh ich is an inst ance of an associa tion of two or mo re user network interfac es (UNI ) for Ethe rnet servic es. For more informat ion on EVC , refe ...

  • Cisco Systems 15454-FTF2 - page 284

    5-28 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Ch apter 5 Eth ern et C ards 5.12 CE-100 T-8 Card 5.12 CE-100 T-8 Card Note For hard ware sp ecif ications , see th e “ A .7.6 CE-100T -8 Card Specifications ” sect ion on page A- 50 . The C E-100T -8 ca rd provides e ight R J-45 10/ 100 Mbp s Ethe rnet p orts an d an RJ-45 cons ole p o ...

  • Cisco Systems 15454-FTF2 - page 285

    5-29 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 5 Ethernet Cards 5.12 CE -100T-8 Card Figur e 5-1 1 CE-1 00T -8 F aceplate an d Bloc k Diag ram The following pa ragrap hs de scribe the g ener al fun ctions of the CE- 100T -8 card and relate to the b lock diagram. In the ingre ss dire ction, (Eth ernet- to-SONET ), th e PHY , w ...

  • Cisco Systems 15454-FTF2 - page 286

    5-30 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Ch apter 5 Eth ern et C ards 5.12. 1 C E-100 T-8 Card- Level Indi cat ors For informa tion on the CE-100T -8 Qo S features , refer to the “CE- 100T -8 Oper ation s” cha pter of th e Cisco ONS 15454 and Cisco O NS 15 454 SDH Etherne t Card Software F eature and Configuration Guide. 5.12. ...

  • Cisco Systems 15454-FTF2 - page 287

    5-31 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 5 Ethernet Cards 5.13 CE-1000-4 Card The CE -1000- 4 card uses pluggable GBIC s to t ransport Ethe rnet tr aff ic over a SON ET n etwork. T he CE-1000- 4 provid es fo ur IE EE 802. 3-com plian t, 100 0-Mbp s Gigab it Et hernet por ts at t he ing ress. At the e gress, the CE-1000-4 ...

  • Cisco Systems 15454-FTF2 - page 288

    5-32 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Ch apter 5 Eth ern et C ards 5.13 CE-100 0-4 Card Note Thi s is possible with CTC as it assumes the force command mode b y default. Ho weve r , to put me mbers i nto or out of serv ice u sing TL 1, the forc e com mand mo de m ust be set. • Cross-con nect s can be adde d or removed from VC ...

  • Cisco Systems 15454-FTF2 - page 289

    5-33 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 5 Ethernet Cards 5.13.1 CE-1000-4 Card- Level Indi cators 5.13.1 CE-1000-4 Card-Lev el Indicators The CE -1000- 4 card facepl ate ha s two c ard-level LED in dica tors, descr ibed i n T abl e 5 -25 . Note If the CE-1000 -4 card is i nserted in a slot that has bee n prepr ovisioned ...

  • Cisco Systems 15454-FTF2 - page 290

    5-34 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Ch apter 5 Eth ern et C ards 5.14 CE- MR-10 C ard 5.14 CE-MR-10 Card Note For hard ware sp ecif ications , see th e “ A.7.7 CE-MR -1 0 Card S pecif i cati ons” se ctio n on pa ge A-5 1 . The CE-M R-10 card pr ovides ten IE EE 802.3-c ompl iant 10/1 00/1000- Mbps Giga bit Etherne t ports ...

  • Cisco Systems 15454-FTF2 - page 291

    5-35 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 5 Ethernet Cards 5.14.1 CE-MR-1 0 Card-Leve l Indicat ors Figur e 5-13 CE-MR-1 0 F acepla te and Bloc k Diagr am Note Th e backpl ane capa city of the CE-M R-10 car d is 10 Gigabi t Eth ernet Port s in slots 5, 6, 12, and 13 a nd 2.5 Giga bit Ether net Port s in slots 1 to 4 and 1 ...

  • Cisco Systems 15454-FTF2 - page 292

    5-36 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Ch apter 5 Eth ern et C ards 5.14. 2 CE- MR- 10 Por t-Lev el I ndi cator s 5.14.2 CE-MR-10 Port-Lev el Indica tors The CE -MR-10 card pr o vides a pair of LEDs f or each port: an amber LED fo r acti v ity ( A CT) and a green LED for lin k status (LIN K). T a ble 5 -28 descr ibes the st atus ...

  • Cisco Systems 15454-FTF2 - page 293

    5-37 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 5 Ethernet Cards 5.15.1 Compatibility by Card For all Ethernet ca rds, the type of GBIC or SFP plugged into the card is d isplayed in CTC and T L1. Cisco of fers SFPs and GBICs as separ ate orderable products. 5.15.1 Compatibilit y by Card T a ble 5 -29 shows the GBICs for th e E1 ...

  • Cisco Systems 15454-FTF2 - page 294

    5-38 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Ch apter 5 Eth ern et C ards 5.15. 2 GBI C Descr iptio n 5.15.2 GBIC Description GBICs are in tegr ated f ib er optic trans cei v ers th at pro vide high -spee d serial link s from a port or slot to the network. V ari ous latching mechanism s can be utilized on the GBIC plugga ble modules. ...

  • Cisco Systems 15454-FTF2 - page 295

    5-39 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 5 Ethernet Cards 5.15.3 G1K-4 DWDM and CWDM GBICs Figur e 5-1 4 GBICs with Clips (lef t) and with a Handle (r ight) 5.15.3 G1K-4 DWDM and CWDM GB ICs D WDM ( 15454-G BIC-xx. x, 15454 E-G BIC-xx.x) and CWDM ( 15454- GBIC-xxx x, 15454E-G BIC-x xxx) GB ICs ope rate in an ON S 15454 G ...

  • Cisco Systems 15454-FTF2 - page 296

    5-40 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Ch apter 5 Eth ern et C ards 5.15. 3 G1 K-4 DWDM a nd CWDM GB ICs CWDM or D WDM GBICs for the G-Ser ies card come in set wa vel engths and are not p rov isiona ble. The wav elength s are printe d on each GBI C, for exampl e, CWDM- GBIC-149 0. The use r must inse rt the specif ic GBIC transm ...

  • Cisco Systems 15454-FTF2 - page 297

    5-41 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 5 Ethernet Cards 5.15.4 SFP Description Figu re 5-16 G- Series wi th C WDM/DWDM GB ICs in Cab le Network 5.15.4 SFP Description SFPs are inte grated fiber - optic transcei vers that pro vide high-speed serial links from a port or slot to the network. V arious latching mechanisms c ...

  • Cisco Systems 15454-FTF2 - page 298

    5-42 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Ch apter 5 Eth ern et C ards 5.15. 4 SFP Descr ipt ion Figur e 5-1 8 A ctuat or/But t on SFP Figu re 5-19 B ail C las p SFP 63066 63067 ...

  • Cisco Systems 15454-FTF2 - page 299

    CH A P T E R 6-1 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 6 Storage Access Networking Cards Note Th e terms "Unidire ctiona l Path Switched Ri ng" and " UPSR" may appear in Ci sco liter ature. These t erms do not refer t o using Cisc o ONS 15xxx prod ucts in a unid irecti onal path sw itched ring configuratio n. R ...

  • Cisco Systems 15454-FTF2 - page 300

    6-2 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapter 6 St orage Ac cess Netw orking Ca rds 6.1 FC_MR- 4 Card Over view – Dual rate (1 G/2G) : MM (550 m) and SM (10 km) – Single rate (1G ): SX (550 m) and LX (10 km) • SONET/SDH support – Four 1.062 5-Gbps FC cha nnels c an be mapp ed int o on e of t he fol lowing: SONET con tain ...

  • Cisco Systems 15454-FTF2 - page 301

    6-3 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 6 Storage Acces s Networ king Cards 6.1.1 FC_MR-4 Card- Level Ind icators Figur e 6-1 F C_MR-4 F a ceplat e and Bl oc k Diagr am 6.1.1 FC_MR-4 Ca rd-Lev el Indica tors Ta b l e 6 - 1 describe s the two card-l e vel LEDs on the FC_MR- 4 card. FLASH SDRAM MPC8250 IBPIA TADM QDR MEMOR ...

  • Cisco Systems 15454-FTF2 - page 302

    6-4 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapter 6 St orage Ac cess Netw orking Ca rds 6.1.2 FC_MR-4 Port-Leve l Indicators 6.1.2 FC _MR- 4 Port-L evel In dicators Each FC _MR-4 po rt ha s a corres pondi ng A CT/LNK LED. Th e A CT /LNK LED is s olid gree n if th e port is a v ailable to carry traf f ic, is provi sioned as in-ser vi ...

  • Cisco Systems 15454-FTF2 - page 303

    6-5 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 6 Storage Acces s Networ king Cards 6.2.2 Enhan ced Car d Mode – STS-1-Xv wh ere X is 37 to 48 – STS-3c-X v where X is 12 to 16 – VC4-Xv wher e X is 12 to 16 6.2.2 Enhanced Card Mode The fea tures a vailable in enha nced car d mode are gi ven in t his sectio n. 6.2.2.1 Mappin ...

  • Cisco Systems 15454-FTF2 - page 304

    6-6 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapter 6 St orage Ac cess Netw orking Ca rds 6.2.2 Enhance d Card Mod e • Negotiation me chan ism to ident ify whet her a far-end FC-over -SONET ca rd supports the Cisco proprietar y B2B mechani sm • Auto detec tion of FC switch B2B credi ts from FC-SW standards-ba sed exchange lin k pa ...

  • Cisco Systems 15454-FTF2 - page 305

    6-7 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 6 Storage Acces s Networ king Cards 6.2.3 Link Integrity 6.2.3 Link Integrit y The li nk i nteg rity featur es are as follo ws: • Data por t disabled if ups tream data p ort is not able to send o v er SONET /SDH transpor t • Data por t disable d if SO NET/SDH tr ansport is erro ...

  • Cisco Systems 15454-FTF2 - page 306

    6-8 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapter 6 St orage Ac cess Netw orking Ca rds 6.4 FC_MR-4 Card GB ICs • Path protection • BLSR • Unprot ected • Protect ion channe l acces s (PCA) The FC_M R-4 p ayload s ca n be transpo rted over the foll owing circu it type s: • STS • STSn • STS-V Note V irtual Tributary (V T ...

  • Cisco Systems 15454-FTF2 - page 307

    CH A P T E R 7-1 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 7 Card Protection This chap ter explains the Ci sco ONS 154 54 card prote ction con figurations. T o provision card prote ction, refer t o the Cisco ONS 15454 P r ocedur e Guid e . Chapter topics include: • 7.1 El ectri cal Ca rd Pr otecti on, pag e 7-1 • 7.2 Electr ical C ...

  • Cisco Systems 15454-FTF2 - page 308

    7-2 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapter 7 C ard Protection 7.1.1 1:1 Prot ecti on 7.1.1 1:1 Protection In 1:1 protectio n, a wo rking ca rd is pair ed with a p rotect card of the same ty pe. If th e wo rking card fails, the traf fic from th e work ing card switches to the prot ect card. Y ou can pro vision 1:1 to be re ver ...

  • Cisco Systems 15454-FTF2 - page 309

    7-3 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 7 Card Protection 7.1.2 1:N P rotection 7.1.2 1:N Protection 1:N prote ction al lows a single ele ctri cal card to pr otect up to fi ve working cards of t he sam e speed. 1:N cards have added circ uitry to act as the pr otect card in a 1:N protection gr oup. Oth erwis e, the car d ...

  • Cisco Systems 15454-FTF2 - page 310

    7-4 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapter 7 C ard Protection 7.1.2 1: N Pr otect ion 7.1.2.1 Revertive Switching 1:N protecti on supports re ve rti v e switching. Re v erti v e switching sen ds the electrica l interf aces (traf fic) back to the o riginal w orking card af ter the card c omes back o nline. Detectin g an acti v ...

  • Cisco Systems 15454-FTF2 - page 311

    7-5 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 7 Card Protection 7.2 Electr ical Card Protect ion a nd the Backpl ane • W orking c ards c an sit o n eit her or both si des of the pr otect card. The following rules apply to port less 1:N pro tecti on groups in th e ONS 15454: • W orking a nd pr otect card group s can r esid ...

  • Cisco Systems 15454-FTF2 - page 312

    7-6 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapter 7 C ard Protection 7.2 Electrica l Card Protect ion and the Bac kplan e Ta b l e 7 - 4 shows the electr ical car d protec tion for each EIA type acc ord ing to shelf si de and slo ts. Maximu m HD DS -1 interfaces (T x and Rx) — — — — — 112 Maximu m HD DS -3 interfaces (T x ...

  • Cisco Systems 15454-FTF2 - page 313

    7-7 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 7 Card Protection 7.2 Electr ical Card Protect ion a nd the Backpl ane Figure 7-3 shows unprot ected low-densi ty elec trical ca rd sche mes by E IA ty pe. Figur e 7 -3 Unpr ot ect ed Lo w -Density El ectr ical Card Sc hemes f or EIA T ypes TCC Cross-connect AIC Cross-connect TCC W ...

  • Cisco Systems 15454-FTF2 - page 314

    7-8 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapter 7 C ard Protection 7.2 Electrica l Card Protect ion and the Bac kplan e Figure 7-4 shows u nprotec ted hig h-den sity el ectri cal card sche mes by EIA ty pe. Figur e 7 -4 Unpr ot ect ed High-De nsity Ele ctr ical Card Schem es fo r EIA T ypes TCC Cross-connect AIC Cross-connect TCC ...

  • Cisco Systems 15454-FTF2 - page 315

    7-9 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 7 Card Protection 7.2 Electr ical Card Protect ion a nd the Backpl ane Figure 7-5 sho ws 1:1 lo w-dens ity ca rd pr ote cti on by EIA ty pe. Figur e 7 -5 1:1 P rot ection Scheme s for L ow -Den sity Electr ical Cards with EIA T ypes TCC Cross-connect AIC Cross-connect TCC Working W ...

  • Cisco Systems 15454-FTF2 - page 316

    7-10 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapter 7 C ard Protection 7.2 Electrica l Card Protect ion and the Bac kplan e Figure 7-6 sho ws 1: N pr otecti on fo r lo w- dens ity el ectr ica l car ds. Figur e 7 -6 1:N Pr otection Sc hemes f or Lo w- Density Ele ctr ical Card s with EI A T ypes Note EC -1 ca rds d o not su pport 1:N ...

  • Cisco Systems 15454-FTF2 - page 317

    7-11 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 7 Card Protection 7.2.1 Standard BNC Protect ion Figure 7-7 shows 1:1 hig h-den sity car d pro tection by E IA ty pe. Figur e 7 -7 1:1 Pr ot ection Sc hemes for Hig h-Density Elec tr ical Car ds with UBIC or MiniBNC EIA Ty p e s 7.2.1 Standard BNC Protection When used with the sta ...

  • Cisco Systems 15454-FTF2 - page 318

    7-12 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapter 7 C ard Protection 7.2.3 MiniBNC Prot ection 7.2.3 MiniBNC Protection When used w ith the MiniBNC EIA , the ONS 15454 su pport s unprotect ed, 1:1, or 1:N (N < 5) electrical card protec tion for DS-1, DS-3 and EC-1 signals, as outlined in T abl e 7 -1 on page 7-2 and T abl e 7 -2 ...

  • Cisco Systems 15454-FTF2 - page 319

    7-13 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 7 Card Protection 7.3 OC-N Card Protect ion 7.3 OC-N Card Protection The ONS 154 54 provides two op tical card protecti on metho ds, 1+1 pr otecti on and opti mized 1+1 protectio n. This section c ov ers th e gener al concep t of op tical c ard protec tion. Spec ific optica l card ...

  • Cisco Systems 15454-FTF2 - page 320

    7-14 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapter 7 C ard Protection 7.4 Unprotect ed Cards Optimi zed 1+ 1 is fu lly c ompli ant w ith Ni ppon T e legraph and T elephone C orpora tion (NTT) specifications. W ith optimi zed 1+1 port-t o-port pr otecti on, ports on the prot ect car d can be assi gned to protec t the corre sponding p ...

  • Cisco Systems 15454-FTF2 - page 321

    7-15 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 7 Card Protection 7.5 Extern al Switchi ng Comma nds A Forc e switch has a higher prior ity than a Manual switch. Lock out s, which pre v ent traf f ic fro m switching to the pr otect port und er any ci rcumst ance, can o nly be applie d to protect cards (in 1+ 1 configurati ons). ...

  • Cisco Systems 15454-FTF2 - page 322

    7-16 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapter 7 C ard Protection 7.5 External Switchi ng Comman ds ...

  • Cisco Systems 15454-FTF2 - page 323

    CH A P T E R 8-1 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 8 Cisco Transp ort Controller Op eration This chapter descr ibes Cisco Tr ansport Controller (CTC), the softw are interfa ce for the Cisco ONS 1 5454. For CTC set up and login inf ormat ion, refer t o the Cisco ONS 15 454 P r ocedur e Guide . Chapter topics include: • 8.1 CT ...

  • Cisco Systems 15454-FTF2 - page 324

    8-2 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapt er 8 Cisco Tr ansport Contr oller Ope rati on 8.1.1 CTC Software Installed on the TCC2/TCC2P Card When you upgr ade CT C software, th e TCC2/T CC2P cards s tore the new CTC version as the prot ect CTC version. When yo u activ ate the new CTC software, th e TCC2/T CC2P card s store the ...

  • Cisco Systems 15454-FTF2 - page 325

    8-3 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 8 Cisco Transpor t Controller O peration 8.1.2 CTC Software Installed on the PC o r UNIX Workstation Select th e Maintenan ce > Softwa re tabs in n etwork vie w to display the softwa re v ersions instal led on all the networ k nodes ( Figure 8- 2 ). Figur e 8-2 CTC Sof tw are V ...

  • Cisco Systems 15454-FTF2 - page 326

    8-4 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapt er 8 Cisco Tr ansport Contr oller Ope rati on 8.2 CTC In stal latio n Over view Note Upgrading the CTC software will ov erwrite your existing softwa re. Y ou must restart CTC after the upgrade is complete . 8.2 CTC In stallation Overview T o conne ct to a n O NS 15454 using CT C, yo u ...

  • Cisco Systems 15454-FTF2 - page 327

    8-5 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 8 Cisco Transpor t Controller O peration 8.3 PC and UNIX Wor kstatio n Re quire men ts Ta b l e 8 - 2 lists the requiremen ts for PCs and UNIX wo rkstations. In add ition to the JRE, the Ja v a plug -in is incl uded on the O NS 1 5454 soft ware CD. T able 8-1 JRE Compatibi lity ONS ...

  • Cisco Systems 15454-FTF2 - page 328

    8-6 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapt er 8 Cisco Tr ansport Contr oller Ope rati on 8.3 PC and UNIX Works tation Requi rements Op erat ing System • PC: W indows 98 (1st and 2nd edi tions), W indows ME, W indows NT 4. 0 with Service Pack 6a , W indows 2000 with Service Pack 3, or Windo ws XP wi th Service P ack 1 • W or ...

  • Cisco Systems 15454-FTF2 - page 329

    8-7 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 8 Cisco Transpor t Controller O peration 8.4 ONS 15454 Conn ection 8.4 ONS 1545 4 Connection Y ou can co nnec t to th e ON S 15454 in mu ltiple ways. Y ou can con nect your PC direct ly th e ONS 15454 (local craft c onnecti on) us ing the RJ-45 port on the T CC2/TCC 2P card or the ...

  • Cisco Systems 15454-FTF2 - page 330

    8-8 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapt er 8 Cisco Tr ansport Contr oller Ope rati on 8.5.1 Le gal Dis claim er The CTC Logi n wind ow pro vides the fo llo wing op tions to accel erate the login pr ocess. • The D isable N etwork D iscovery opt ion om its the discovery of no des wi th data commu nicati ons channel ( DCC) co ...

  • Cisco Systems 15454-FTF2 - page 331

    8-9 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 8 Cisco Transpor t Controller O peration 8.6.1 Node View Figur e 8-3 Node Vi ew (Def ault Login V iew) 8.6.1 Node View Node view , shown in Fi gure 8-3 , is the first view that appe ars afte r you l og into a n ONS 15454. T he logi n node is the first no de shown, and it is the “ ...

  • Cisco Systems 15454-FTF2 - page 332

    8-10 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapt er 8 Cisco Tr ansport Contr oller Ope rati on 8.6.1 No de Vi ew The wordi ng on a card in node view shows the stat us of a card (A ctive, Standby , Loading , or Not Provisio ned). Ta b l e 8 - 5 lists the card statuses. The por t col or in both card a nd no de view indic ates the por ...

  • Cisco Systems 15454-FTF2 - page 333

    8-11 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 8 Cisco Transpor t Controller O peration 8.6.1 Node View Figur e 8-4 T er minal Loopbac k Indicat or Figur e 8-5 F acility Loopb ack Indicat or 8.6.1.2 Node View Card Shortcuts If you m ove your m ouse over cards in the g raphic, popups di splay additional inf ormation abou t the ...

  • Cisco Systems 15454-FTF2 - page 334

    8-12 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapt er 8 Cisco Tr ansport Contr oller Ope rati on 8.6.2 Netwo rk Vie w 8.6.2 Network View Network v iew allow s you to view and ma nage O NS 15454s that have DCC connecti ons to t he node that you logge d into and any login node groups you ha ve selected ( Figure 8-6 ). Histor y Provides ...

  • Cisco Systems 15454-FTF2 - page 335

    8-13 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 8 Cisco Transpor t Controller O peration 8.6.2 Network View Figur e 8-6 Net wor k in CTC Ne tw or k V iew Note Node s wit h DCC c onne ctions to t he login node do n ot appe ar if you checked the D isable Networ k Discovery check box in the L ogin dialog box. The graph ic ar ea di ...

  • Cisco Systems 15454-FTF2 - page 336

    8-14 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapt er 8 Cisco Tr ansport Contr oller Ope rati on 8.6.2 Netwo rk Vie w 8.6.2.2 CTC Node Colors The co lor of a node i n net work view , sh own in Ta b l e 8 - 9 , indicates the no de alar m statu s. 8.6.2.3 DCC Links The lines sh ow DCC connections between the nodes ( T able 8- 10 ). DCC ...

  • Cisco Systems 15454-FTF2 - page 337

    8-15 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 8 Cisco Transpor t Controller O peration 8.6.3 Card Vie w 8.6.2.4 Link Consolidation CTC provide s the ability to consolid ate the DCC, general communica tions channel (GCC) , optical transport section (O TS), provision able pa tchcord (PPC), and server trail links shown in the ne ...

  • Cisco Systems 15454-FTF2 - page 338

    8-16 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapt er 8 Cisco Tr ansport Contr oller Ope rati on 8.6.3 Car d View Figur e 8-7 CTC Card Vie w Show ing a DS1 Car d Note CT C provides a car d view for all ONS 15454 car ds except the TCC2 , TCC2P , XCVT , XC10G, and XC-VX C-10G c ards. Provisionin g fo r the se comm on c ontro l cards occ ...

  • Cisco Systems 15454-FTF2 - page 339

    8-17 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 8 Cisco Transpor t Controller O peration 8.6.4 Pri nt or Ex port CT C Data 8.6.4 Print or Export CTC Data Y ou can use the File > Print or File > Export optio ns to print or expo rt CTC provisio ning information for rec ord keepi ng or tr oublesho oting. The fun ction s can ...

  • Cisco Systems 15454-FTF2 - page 340

    8-18 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapt er 8 Cisco Tr ansport Contr oller Ope rati on 8.7 Using the CTC Lau ncher Appl ication to M anage M ultiple ONS Node s The T abl e Conten ts opti on does no t apply to all windows; fo r a list of w indows that do not support print or export, see the Ci sco O NS 15454 P r ocedur e Guid ...

  • Cisco Systems 15454-FTF2 - page 341

    8-19 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 8 Cisco Transpor t Controller O peration 8.7 Using the CTC Launcher Application to Manage Mu ltiple ONS Nodes Figu re 8-8 Stat ic I P - Over -CLN S T unne ls Figure 8-9 shows the same n etwork using TL1 tunne ls. Tunnel provisio ning oc curs a t the CTC c omputer when the tunnel i ...

  • Cisco Systems 15454-FTF2 - page 342

    8-20 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapt er 8 Cisco Tr ansport Contr oller Ope rati on 8.7 Using the CTC Lau ncher Appl ication to M anage M ultiple ONS Node s Figu re 8-9 TL1 T un nels TL 1 t un n e ls p r ovi d e s ever al ad van ta ge s ove r s ta ti c IP -ove r- CL NS t un ne ls . Be ca u se t un ne l p r ovi si o n in g ...

  • Cisco Systems 15454-FTF2 - page 343

    8-21 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 8 Cisco Transpor t Controller O peration 8.8 TC C2/T CC2P Ca rd R eset TL1 tunnel specifications and general capabilities include: • Each tu nnel ge neral ly supp orts betwee n six to eigh t E NEs, de pendin g on the num ber of tunn els at the ENE. • Each CTC sessi on can supp ...

  • Cisco Systems 15454-FTF2 - page 344

    8-22 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapt er 8 Cisco Tr ansport Contr oller Ope rati on 8.10 Soft ware Re vert operati on should be pa rt of a regular O NS 15454 mai ntenance progra m at approxi mate ly week ly intervals, and shoul d also be compl eted when preparin g an ONS 15454 fo r a pending natural di saster, such as a f ...

  • Cisco Systems 15454-FTF2 - page 345

    CH A P T E R 9-1 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 9 Security This chapte r provides information about Cisco ONS 1 5454 users and security . T o provi sion security , refer t o the Cisco ONS 15454 P r ocedur e Guid e . Chapter topics include: • 9.1 U ser I Ds and Secur ity Levels, page 9-1 • 9.2 U ser Pr i vileges a nd Pol ...

  • Cisco Systems 15454-FTF2 - page 346

    9-2 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapter 9 Sec urity 9.2.1 User Pri vilege s by CTC Acti on 9.2.1 User Privileges by CTC Action Ta b l e 9 - 1 shows the a ctio ns th at ea ch u ser p rivilege level can perf orm in node view . T able 9-1 ONS 15 454 Secur ity Lev els—Node Vi ew CTC T ab S ubtab [Subtab]:Actions Retrieve Mai ...

  • Cisco Systems 15454-FTF2 - page 347

    9-3 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 9 Secur ity 9.2 .1 User Pri vile ges by CTC Act ion Security Users: Create /Delete /Clear Security I ntrusion Alarm — ——X Users: E dit Same u ser Same us er Sa me user All users Active Logins: V i ew/Logout/ Retrie v e La st Acti vity T ime — ——X Policy: Ed it/V iew (Pr ...

  • Cisco Systems 15454-FTF2 - page 348

    9-4 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapter 9 Sec urity 9.2.1 User Pri vilege s by CTC Acti on WDM- ANS Provision ing: E dit — — — X Provisioning: Reset X X X X Interna l Patchcor ds: Create/Edit/De lete/Commit/ Default P atchcords —— X X Port Sta tus: Launc h ANS — — — X N o d e S e t u p X XXX Op tic al S id ...

  • Cisco Systems 15454-FTF2 - page 349

    9-5 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 9 Secur ity 9.2 .1 User Pri vile ges by CTC Act ion Ta b l e 9 - 2 shows the act ions that each user pri vile ge le vel can perform in networ k view . A u d i t R e t r i e v e — ——X Archi ve — — X X T est Access V iew X X X X DW DM APC: Run/Disable/ Refresh — X X X WDM ...

  • Cisco Systems 15454-FTF2 - page 350

    9-6 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapter 9 Sec urity 9.2.2 Sec urity Polic ies 9.2.2 Security Policies Users with Superuser sec urity pri vile ges can provision security policies on the ONS 15454. These security polic ies include idle user ti meouts, password ch anges, password aging, and user lock out paramet ers. In addit ...

  • Cisco Systems 15454-FTF2 - page 351

    9-7 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 9 Secur ity 9.2.2 Security Policies 9.2.2.2 Idle User Timeout Each ONS 154 54 CTC or TL 1 user can b e idle durin g his or her l ogin sessi on for a spe cified amou nt of time be fore t he CTC window is l ocked. Th e lockout s prevent unaut horized users fro m ma king c hanges. Hig ...

  • Cisco Systems 15454-FTF2 - page 352

    9-8 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapter 9 Sec urity 9.3 Audit Tra il 9.2.2.4 Secure Access Secure access is ba sed on SSH and SSL pro tocols . Secure ac cess can be enabled fo r EMS (app licable to CTC). Whe n access is set to secure, CTC provid es enhanced SFTP and SSH secur ity when communica ting with the node. For more ...

  • Cisco Systems 15454-FTF2 - page 353

    9-9 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 9 Secur ity 9.3.2 Audit Trail Capacities • Connection Mode—T elnet, Console , SNMP • Category—T yp e of change (Hardwa re, Software, Con figuratio n) • Status—Statu s of the user ac tion (Read, Initial, Successful, T imeout, F ailed) • T ime—Time o f ch ange • Mes ...

  • Cisco Systems 15454-FTF2 - page 354

    9-10 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapter 9 Sec urity 9.4.2 Sha red Secre ts 9.4.2 Sh ared Sec ret s A shared secr et is a text string tha t serves as a password be tween: • A RADIUS client an d RADIUS serv er • A RADIUS client an d a RADIUS proxy • A RADI US proxy a nd a RAD IUS serv er For a conf igura tion that use ...

  • Cisco Systems 15454-FTF2 - page 355

    CH A P T E R 10-1 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 10 Timing This chapte r provid es information ab out Cisco ONS 15 454 SONET timing. T o provision timin g, refer to the Cisco ONS 1545 4 Pr ocedure Guide . Chapter topics include: • 10.1 Timing Param eters , pag e 10 -1 • 10.2 Network Timing, page 10-2 • 10.3 Synchron i ...

  • Cisco Systems 15454-FTF2 - page 356

    10-2 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapter 10 Timin g 10.2 Networ k Timing Cautio n Mixed timing allows you to selec t both external and line timing sou rces. Howev er , Cisco does not recomme nd its use be cause it can create timi ng loops . Use this mode with caution. Note O nly one port can be used fo r timi ng relate d p ...

  • Cisco Systems 15454-FTF2 - page 357

    10-3 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 0 Timing 10.3 S ynch roni zat ion S tat us M essa gin g Figur e 1 0-1 ONS 15454 Timing E xample 10.3 Synchroni zation Status Messagin g Synchroniz ation st atus m essaging ( SSM) is a SONE T and SDH prot ocol th at com munica tes info rmat ion about the quality of the timin g so ...

  • Cisco Systems 15454-FTF2 - page 358

    10-4 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapter 10 Timin g 10.3.1 SONET SSM Messages 10.3.1 SONET SSM Messa ges SSM messages are ei ther Genera tion 1 or Gen eration 2. Generatio n 1 is the first and most widely deployed SSM mess age set. Ge neratio n 2 i s a newer version. If you e nable SONET SSM for the ONS 154 54, con sult yo ...

  • Cisco Systems 15454-FTF2 - page 359

    10-5 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 0 Timing 10.3.2 SD H SSM Me ssages G812T 3 Transit nod e clock tracea ble G812L 4 Loc al no de clock trac eable SETS 5 S ynch rono us equi pment DUS 6 Do not use for timing synchronization T able 1 0-3 SDH SSM Messag es (continued) Message Quality Description ...

  • Cisco Systems 15454-FTF2 - page 360

    10-6 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapter 10 Timin g 10.3.2 SDH SSM Messages ...

  • Cisco Systems 15454-FTF2 - page 361

    CH A P T E R 11-1 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 11 Circuits and Tunnels Note Th e terms "Unidire ctiona l Path Switched Ri ng" and " UPSR" may appear in Ci sco liter ature. These t erms do not refer t o using Cisc o ONS 15xxx prod ucts in a unid irecti onal path sw itched ring configuratio n. Rather , t ...

  • Cisco Systems 15454-FTF2 - page 362

    11-2 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapte r 11 Circui ts and Tunnel s 11.1 Overview • 11.20 Merged Circ uits, pa ge 11-46 • 11.21 Recon figured Circui ts, page 11-47 • 11.2 2 VLAN Manage ment , page 11 -47 • 11.23 Server Trails, pag e 11-47 11.1 Overview Y ou ca n creat e circui ts across an d within O NS 15454 nodes ...

  • Cisco Systems 15454-FTF2 - page 363

    11-3 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 1 Circuits and Tunnel s 11.2 Circuit Properties • Size—Th e cir cuit si ze. V T cir cuits are 1.5. ST S circ uit siz es are 1, 3 c, 6c, 9c, 12 c, 2 4c, 36c, 48c , and 192c . OC HNC s izes a re Equ ippe d non specific, Mu lti-rat e, 2. 5 Gb ps No FE C (forwar d er ror correc ...

  • Cisco Systems 15454-FTF2 - page 364

    11-4 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapte r 11 Circui ts and Tunnel s 11.2.1 Concaten ated STS Time Sl ot Assignm ents Figur e 1 1 -1 ONS 15454 Circuit W indo w in Netw or k View 11.2.1 Concatenated STS Time Slot Assig nments T able 11-1 shows the av ailable time sl ot assi gnmen ts for conc atena ted STSs when usin g CTC to ...

  • Cisco Systems 15454-FTF2 - page 365

    11-5 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 1 Circuits and Tunnel s 11.2.1 Concatenat ed STS Ti me Slot Assi gnments 40 Y e s Y e s Y e s N oN oN oN oN oN o 43 Y es Y es No No No No No No No 46 Y es No Y es No No No No No No 49 Ye s Y e s Ye s Ye s Ye s Ye s Ye s Ye s N o 52 Y e sY e sY e sN o Y e s Y e s Y e s N o N o 55 ...

  • Cisco Systems 15454-FTF2 - page 366

    11-6 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapte r 11 Circui ts and Tunnel s 11.2.2 Circ uit Status 11.2.2 Circuit Status The cir cuit stat uses that appear in the Circu it window Status co lumn are generate d by CTC based on conditi ons a long t he ci rcuit pa th. T able 11 -2 sho ws the status es that ca n appear i n the Status c ...

  • Cisco Systems 15454-FTF2 - page 367

    11-7 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 1 Circuits and Tunnel s 11.2.3 Circuit States 11.2.3 Circuit States The circ uit service state is an agg regate of the cross-co nnect state s within the cir cuit. • If all cr oss-co nnects in a circuit are in th e In-Se rvice and No rmal (I S-NR) s ervice sta te, the circuit s ...

  • Cisco Systems 15454-FTF2 - page 368

    11-8 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapte r 11 Circui ts and Tunnel s 11.2.3 Circ uit States • If all cros s-connec ts in a circuit ar e in an Out-of -Servic e (OOS) s ervice stat e, such as Out-of-Ser vice and Manage ment, Main tenance (OOS-M A,MT ); Ou t-of- Servic e an d Mana gement , Di sabled (OOS-M A,DSBL D); or Ou t ...

  • Cisco Systems 15454-FTF2 - page 369

    11-9 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 1 Circuits and Tunnel s 11.2.4 C ircuit Protect ion T ypes Note Alth ough M L-Ser ies ca rds do not us e th e T elc ordia GR -1093- CORE st ate mode l, you can also se t a so ak timer for ML-Ser ies cards port s. The soak period is the am ount of time that the ML-Ser ies port re ...

  • Cisco Systems 15454-FTF2 - page 370

    11-10 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapte r 11 Circui ts and Tunnel s 11.2. 5 Circui t Info rmation in the E dit Cir cuit Window 11.2.5 Circuit Information in the Edit Circuit Window Y ou c an edi t a sel ected c ircuit using t he Edi t button on the Circuit s window . Th e tabs tha t appe ar depe nd on the circui t chosen: ...

  • Cisco Systems 15454-FTF2 - page 371

    11-11 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 1 Circuits and Tunnel s 11.2.5 Circuit Information in the Edit Circuit Window • Alarm st ates of node s on t he circu it rout e • Number of alarms on each node organi zed by se verity • Port se rvic e state s on th e circu it rou te • Alar m state/co lor of mo st se v e ...

  • Cisco Systems 15454-FTF2 - page 372

    11-12 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapte r 11 Circui ts and Tunnel s 11.3 Cross-Conn ect Card Bandw idth Figur e 1 1 -2 BLSR Circuit Di splay ed on the Detailed Circuit M ap 11.3 Cross-Co nnect Card Bandwid th The ONS 154 54 XCVT , XC10G, and XC-VXC -10G cross- conne ct cards perfo rm port -to-por t, time- di vision mu lti ...

  • Cisco Systems 15454-FTF2 - page 373

    11-13 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 1 Circuits and Tunnel s 11.3 Cross-Conne ct Card Bandwidth For example, if you creat e a VT1.5 circuit fro m an STS- 1 on a drop card, two VT ma trix STS po rts are used, as s hown in Figur e 11 -3 . If you c reate a secon d VT1.5 circui t from the sam e STS port on the drop ca ...

  • Cisco Systems 15454-FTF2 - page 374

    11-14 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapte r 11 Circui ts and Tunnel s 11.3 Cross-Conn ect Card Bandw idth Figur e 1 1 -4 T wo VT1 .5 Circui ts in a BLSR Note Circ uits wi th DS1- 14 and DS1N-1 4 circ uit sourc es or des tinations use on e STS p ort on the VT ma trix. Because you can only cre ate 14 VT1. 5 circuit s from t h ...

  • Cisco Systems 15454-FTF2 - page 375

    11-15 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 1 Circuits and Tunnel s 11.4 Portless Transm ux Cross -conn ect card re sour ces can be vi ewe d on the Mai ntenan ce > Cross- Connect > Resource Us age tab . This tab shows: • STS-1 Matri x—The percent of STS matrix re sources t hat are used . 288 STSs ar e av ailabl ...

  • Cisco Systems 15454-FTF2 - page 376

    11-16 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapte r 11 Circui ts and Tunnel s 11.5 DCC Tunn els T able 11-7 li sts the por tless tr ansmux for XC VT trunk port s and for XC10G o r XC- VXC-10G a ny-slot ports. 11.5 DCC Tun nels SONET p rov ides four DCCs fo r net w ork el ement (NE) oper ation, admi nistra tion, mainte nanc e, a nd ...

  • Cisco Systems 15454-FTF2 - page 377

    11-17 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 1 Circuits and Tunnel s 11.5.1 Traditional DC C Tunnels 11.5.1 Traditional DCC Tunnels In trad itional DCC tunnels, you can use th e thre e LDC Cs and t he SDC C (w hen no t used for ONS 154 54 DCC termin ations). A traditiona l DCC tunnel end point is defined by slot, port, an ...

  • Cisco Systems 15454-FTF2 - page 378

    11-18 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapte r 11 Circui ts and Tunnel s 11.5.2 IP-En capsul ated Tunne ls • All DCC t unnel connec tions are bidir ectiona l. 11.5.2 IP-Encapsulated Tu nnels An IP-enc apsula ted tunn el puts an SDCC in an IP packet at a source nod e and dyna mically route s the packet to a d estination node. ...

  • Cisco Systems 15454-FTF2 - page 379

    11-19 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 1 Circuits and Tunnel s 11. 8.1 Monito r Circu its usi ng portl ess ports as a sourc e on DS3XM-12 Figur e 1 1 -6 VT1 .5 Mo nito r Circ uit Receiv ed at an EC1 -12 P or t 11.8.1 Monitor Circuits using p ortless ports a s a source on DS3 XM-12 W it h STS bi-directiona l circuit ...

  • Cisco Systems 15454-FTF2 - page 380

    11-20 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapte r 11 Circui ts and Tunnel s 11.9.1 Open-Ended Path Protection Circuits Note Th e XC -V X C-1 0 G cross-conne ct card supports VT switching ba sed on SF and SD bit error rate (BE R) thresho lds. Th e XC 10G an d XC VT cross-c onne ct cards do no t suppor t VT switchin g based on SF a ...

  • Cisco Systems 15454-FTF2 - page 381

    11-21 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 1 Circuits and Tunnel s 11.9.2 Go- and-Ret urn Pa th Protect ion Rout ing 11.9.2 Go-and-Return Path Protection Routing The go-and-r etu rn pat h prote ctio n routin g op tion allows you to rout e th e path prote ction working path on one fiber pair a nd the protect pat h on a s ...

  • Cisco Systems 15454-FTF2 - page 382

    11-22 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapte r 11 Circui ts and Tunnel s 11.11 BL SR STS and VT Sque lch Tables • If BLSR s are pr ovisioned as nonrevertive, PCA circui ts ar e not rest ored au tomat ical ly afte r a ring or span switch. Y ou must switch the BLSR manually . • PCA circ uits a re rou ted on worki ng chan nel ...

  • Cisco Systems 15454-FTF2 - page 383

    11-23 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 1 Circuits and Tunnel s 11.11.2 BLSR VT Squelch T able 11.11. 2 BLSR VT Sque lch T able BLSR VT squelc h tables onl y appear on the nod e dropping VTs from a BLSR an d are use d to perfor m VT -le vel squelchi ng whe n a node i s isol ated. VT sque lching is su pported on the O ...

  • Cisco Systems 15454-FTF2 - page 384

    11-24 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapte r 11 Circui ts and Tunnel s 11.13 Se ction and Pa th Trace • Circuit name • T ype • Size • OCHNC Wlen • Directio n • Protect ion • Status • Source • Destination • # of VL ANs • # of Spans • State • Loopb ack Note CT C does no t suppor t the d isplay of C is ...

  • Cisco Systems 15454-FTF2 - page 385

    11-25 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 1 Circuits and Tunnel s 11.14 Pa th Sign al Lab el, C2 By te If the s tring r eceived at a ci rcuit dr op port doe s not mat ch the string the port expects to rece iv e, an a larm is raised. T w o path trace modes are av ailab le: • Automati c—The rece i ving por t assumes ...

  • Cisco Systems 15454-FTF2 - page 386

    11-26 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapte r 11 Circui ts and Tunnel s 11.14 Path Signal Label, C2 Byte (LLC) /Subne two rk Acces s Protoc ol (SN AP) header f iel ds on an Ethernet netwo rk; it allow s a singl e interf ace to transport mult iple payload ty pes simultaneousl y . C2 byte he x v alues are pro vided in T able 11 ...

  • Cisco Systems 15454-FTF2 - page 387

    11-27 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 1 Circuits and Tunnel s 11.15 Automatic Circuit Routing 11.15 Auto matic Circuit Routing If you sele ct auto matic rou ting duri ng circ uit crea tion, CT C routes th e circu it by dividing the entire circu it route i nto segment s based on pro tectio n domains. For unprotec te ...

  • Cisco Systems 15454-FTF2 - page 388

    11-28 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapte r 11 Circui ts and Tunnel s 11.15. 1 Bandwi dth Allo cation an d Routin g • Circuit routin g does not use links that ar e down . If you want all links to be considered for routing, do not cre ate circ uits whe n a link is dow n. • Circuit routing computes the shortest p ath when ...

  • Cisco Systems 15454-FTF2 - page 389

    11-29 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 1 Circuits and Tunnel s 11.16 Manual C ircuit R outing Figur e 1 1 -9 Secondary Sources and Dest inations Se veral rule s apply t o secon dary sour ces an d des tinations: • CTC doe s not allow a seco ndary destina tion for un idirecti onal circui ts be cause y ou ca n always ...

  • Cisco Systems 15454-FTF2 - page 390

    11-30 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapte r 11 Circui ts and Tunnel s 11.16 M anual Circuit Routin g Figur e 1 1 -1 0 Alt er nate P aths for V ir tual P ath Pr ot ection Segme nts • For multicard EtherSwitc h circuits, the Fully P ath Protected optio n is ignore d. • For a node th at has a path prot ection sele ctor bas ...

  • Cisco Systems 15454-FTF2 - page 391

    11-31 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 1 Circuits and Tunnel s 11.16 Manual C ircuit R outing Figur e 1 1 -12 Ether net Sh ar ed P ac ket Ring Routin g • Multica rd Ether Switch c ircuit s can have virtual path protec tion segments i f the sour ce or dest ination is not in the p ath protecti on domain. Th is restr ...

  • Cisco Systems 15454-FTF2 - page 392

    11-32 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapte r 11 Circui ts and Tunnel s 11.16 M anual Circuit Routin g Doubl e path prot ecti on 2 — — 2 Doubl e path prot ecti on — 2 2 — Tw o w a y 1 1 — — Ethe rnet 0 or 1 0 or 1 Ethe rnet node source — Ether net 0 or 1 0 or 1 — Eth erne t node dro p T able 1 1 -13 Unid ir ec ...

  • Cisco Systems 15454-FTF2 - page 393

    11-33 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 1 Circuits and Tunnel s 11.17 Constraint -Based C ircuit R outing Although virtual path protection segments are possible in VT tunnels, VT tunnels are still considered unprote cted. If you ne ed to p rotec t VT circ uits, u se two in depende nt VT tunnel s that a re diversely r ...

  • Cisco Systems 15454-FTF2 - page 394

    11-34 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapte r 11 Circui ts and Tunnel s 11.18 Virt ual Concate nated Circu its 11.18 Virtu al Concatenate d Circuits V irt ual concat enat ed (VC A T) circ uits, also called V CA T g roups (VCG s), trans port tra ff ic using noncont iguous T DM t ime slot s, avoiding the bandwi dth fr agment at ...

  • Cisco Systems 15454-FTF2 - page 395

    11-35 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 1 Circuits and Tunnel s 11.18.2 VCAT Member Rout ing Figur e 1 1 -14 V CA T Common F iber Routing CE-Series ca rds also support split fiber routing, which allo ws the indi vid ual members to be routed on different fiber s or each membe r to have different ro uting constra ints. ...

  • Cisco Systems 15454-FTF2 - page 396

    11-36 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapte r 11 Circui ts and Tunnel s 11.1 8.3 Link Ca pacit y Adj ustm ent Note The switch time va lues sho wn in T able 11-16 does not incl ude dif feren tial delay . Th e maximum differentia l delay f or CE10 0T -8 is 122m s. This differentia l delay i s added t o the sw itch ti me to get ...

  • Cisco Systems 15454-FTF2 - page 397

    11-37 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 1 Circuits and Tunnel s 11.18.4 VCAT Circui t Size Note Prote ction sw itchin g for LCA S, SW -LCAS, and non-LC AS VCA T circui ts migh t exceed 60m s. T raff ic loss for VT VCA T cir cuits is app roximately two tim es more t han an ST S VCA T circuit. Y o u can minimize traf f ...

  • Cisco Systems 15454-FTF2 - page 398

    11-38 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapte r 11 Circui ts and Tunnel s 11.18.5 Open-End ed VCAT • FC_MR-4 ( line mode) card —All VCA T circ uits usin g FC_M R-4 (li ne mod e) car ds have a fixed number of me mber s; you cann ot add or dele te members . • ML-Series c ards— All VCA T circuits usi ng ML -Series c ards h ...

  • Cisco Systems 15454-FTF2 - page 399

    11-39 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 1 Circuits and Tunnel s 11.18.5 Open-E nded VCAT Figur e 1 1 -16 Open-End ed V CA T Open-e nded VC A T circ uits ca n orig inate or termina te on any pair of OC-N port s and you can route open-en ded VC A T circui ts us ing any of the ca rds a nd por ts suppor ted by V CA T . T ...

  • Cisco Systems 15454-FTF2 - page 400

    11-40 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapte r 11 Circui ts and Tunnel s 11.19 B ridge and Ro ll 11.19 Bridge a nd Roll The CT C Bri dge and Rol l wiza rd re route s live traff ic with out in terr upting service . Th e brid ge pr ocess take s traf f ic from a designat ed “roll f rom” f acility an d establishes a cross-co n ...

  • Cisco Systems 15454-FTF2 - page 401

    11-41 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 1 Circuits and Tunnel s 11.19.1 Rolls Windo w Figur e 1 1 -1 7 Rolls Window The Rolls w indo w informat ion includes: • Roll From Circuit—The cir cuit that has connect ions that will no longer be used when the roll process is complete. • Roll T o Circuit—Th e circuit th ...

  • Cisco Systems 15454-FTF2 - page 402

    11-42 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapte r 11 Circui ts and Tunnel s 11.19.2 Ro ll Status • Roll From Circuit—The circuit that has connecti ons that will no longer be used when the proce ss is comp let e. • Roll From Path— T he old pat h that is be ing re routed . • Roll T o P ath—The ne w path where t he Roll ...

  • Cisco Systems 15454-FTF2 - page 403

    11-43 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 1 Circuits and Tunnel s 11.19.3 Single and Dual Rolls Note Y o u can only re rout e circui ts in the DISCOVERED status. Y ou cann ot reroute circuit s that are in the R O LL_PENDING st atus. 11.19. 3 Single an d Dual Rolls Circuits ha ve an additional layer of roll ty pes: sing ...

  • Cisco Systems 15454-FTF2 - page 404

    11-44 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapte r 11 Circui ts and Tunnel s 11.19.3 Si ngle and Dual Rolls Figur e 1 1 -20 Single Roll fr om One Cir cuit to Another Cir cuit (Destination C hang es) Figure 11- 21 shows one circuit rolling onto another circuit at the sourc e. Figur e 1 1 -21 Single Roll fr om One Cir cuit to Anothe ...

  • Cisco Systems 15454-FTF2 - page 405

    11-45 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 1 Circuits and Tunnel s 11.1 9.4 Two C irc uit B ridg e an d Ro ll Figur e 1 1 -22 Dual Roll t o Rer out e a Link Figure 11- 23 illustrates a dual roll in volving tw o circuits. Figur e 1 1 -23 Dual Roll t o Rer out e t o a Dif f erent No de Note If a new segmen t is c reated o ...

  • Cisco Systems 15454-FTF2 - page 406

    11-46 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapte r 11 Circui ts and Tunnel s 11.19.5 Protected Circuit s 11.19. 5 Protec ted Circ uits CTC allows you to ro ll the workin g or prote ct path regardle ss of which pa th is ac ti ve. Y ou can upgrad e an unp rotec ted circ uit to a fully p rotect ed ci rcuit or d owngrade a fully prote ...

  • Cisco Systems 15454-FTF2 - page 407

    11-47 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 1 Circuits and Tunnel s 11.21 Reconf igured C ircuits 11.21 Recon figured Circuits Y o u can reco nf igure m ultiple c ircui ts, w hich is typicall y nec essary when a la r ge numb er of ci rcuit s ar e in the P A R TIAL status. Wh en reconf i guring multip le circ uits, the se ...

  • Cisco Systems 15454-FTF2 - page 408

    11-48 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapte r 11 Circui ts and Tunnel s 11.23.1 Server Trail Protec tion Type s 11.23. 1 Server Trail Pr otection Ty pes The serv er trail protection ty pe determines the protect ion type for an y circuits tha t tra ver se it. A serve r trail lin k can be one of the following protec tion ty pes ...

  • Cisco Systems 15454-FTF2 - page 409

    11-49 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 1 Circuits and Tunnel s 11.23.2 VCAT Circuit Routing over Server Trails 11.23.2.1 Shared Resource Link Group The Share d Resour ce Link G roup (SRL G) attri bute can be assigne d to a server tr ail link using a commonl y shared re source suc h as port, fiber or span . For examp ...

  • Cisco Systems 15454-FTF2 - page 410

    11-50 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapte r 11 Circui ts and Tunnel s 11.23.2 VCAT Circuit Routing over Se rver Tra ils ...

  • Cisco Systems 15454-FTF2 - page 411

    CH A P T E R 12-1 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 12 SONET Topologies and Upg rades Note Th e terms "Unidire ctiona l Path Switched Ri ng" and " UPSR" may appear in Ci sco liter ature. These t erms do not refer t o using Cisc o ONS 15xxx prod ucts in a unid irecti onal path sw itched ring configuratio n. ...

  • Cisco Systems 15454-FTF2 - page 412

    12-2 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapte r 12 SONET Topol ogies and Upgrade s 12.1 SONET Rings and TCC2/TCC2P Car ds T able 12-1 ONS 15454 Ring s with Re dundant TCC2/TCC2P Card s Ring T ype Maximum R ings per N ode BLS Rs 5 2-Fiber BLSR 5 4-Fiber BLSR 1 Path pro tection with SDCC 34 1 , 2 Path protect ion with LDCC 14 3 , ...

  • Cisco Systems 15454-FTF2 - page 413

    12-3 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 2 SONET Topologi es and Upgr ades 12.2 Bidi rectional Line Swit ched Ri ngs 12.2 Bidirect ional Line Switc hed Rings The O NS 154 54 can suppor t fiv e concurr ent bi direct ional l ine sw itch r ings (BL SRs) i n one o f th e follo wing con figur ations: • Fiv e two-f iber BL ...

  • Cisco Systems 15454-FTF2 - page 414

    12-4 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapte r 12 SONET Topol ogies and Upgrade s 12.2.1 Two-Fiber BLSRs Figur e 12 -1 Fou r -N ode, T wo- Fiber BLSR The SONET K1, K2, and K3 b ytes ca rry the infor mation th at go ver ns BLSR protect ion swit ches. E ach BLSR node m onitor s the K bytes to determ ine when to switc h the SONE T ...

  • Cisco Systems 15454-FTF2 - page 415

    12-5 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 2 SONET Topologi es and Upgr ades 12.2.1 Two-Fibe r BLSRs Figur e 12 -2 Fou r -Node, T wo-Fibe r BLSR T ra ff ic P atter n Sample Figure 12- 3 sho ws how tra ff ic is reroute d follo wing a line break between Node 0 and Node 3. • All circuits orig inating on Node 0 that carrie ...

  • Cisco Systems 15454-FTF2 - page 416

    12-6 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapte r 12 SONET Topol ogies and Upgrade s 12.2.2 Four-Fi ber BLSRs Figur e 12 -3 Fou r -Node, T wo-Fibe r BLSR T ra ff ic P atter n F ollowi ng Line Br eak 12.2.2 Four-Fiber BLSRs Four-f iber BLSRs doubl e the ba ndwidth o f two-fiber BLSRs. Beca use they allow span switch ing as well as ...

  • Cisco Systems 15454-FTF2 - page 417

    12-7 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 2 SONET Topologi es and Upgr ades 12.2.2 Four -Fiber BLSR s Figur e 12 -4 Fou r -Node, Four -Fiber BLSR Fou r -f iber BL SRs pro vide span and ring switchin g: • Span swit ching ( Figure 12 -5 on page 12-8 ) occurs when a wo rking span fails. T raf fic sw itches to th e protec ...

  • Cisco Systems 15454-FTF2 - page 418

    12-8 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapte r 12 SONET Topol ogies and Upgrade s 12.2.2 Four-Fi ber BLSRs Figur e 12 -5 Fou r -Fiber BLSR Span S witc h • Ring switch ing ( Figure 12-6 ) occurs whe n a span swi tch cann ot reco ve r traf fic, such as when bot h the worki ng an d prote ct fibers fail on the same span. In a rin ...

  • Cisco Systems 15454-FTF2 - page 419

    12-9 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 2 SONET Topologi es and Upgr ades 12.2.3 BLSR Bandwidth Figur e 12 -6 Fou r -Fib er BLSR Ring Sw itch 12.2.3 BLSR Bandwidth BLSR nodes c an ter minate tr af fi c coming f rom either side of the ring . Therefo re, BL SRs are suite d for distributed node -to-nod e traffic applicat ...

  • Cisco Systems 15454-FTF2 - page 420

    12-10 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapte r 12 SONET Topol ogies and Upgrade s 12.2.4 BLS R Applicatio n Exampl e Figure 12- 7 shows an example of BLSR ba ndwidt h reuse . The sa me STS carrie s thre e different t raffic sets simult aneously on d ifferent spans arou nd the ring : one set fr om Node 3 to N ode 1, an other se ...

  • Cisco Systems 15454-FTF2 - page 421

    12-11 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 2 SONET Topologi es and Upgr ades 12.2.4 BLSR Application Example • The ONS 15454 OC-3 card support s a total of fo ur OC-3 ports so that two additiona l OC-3 span s can be added at little co st. Figur e 12 -8 Fiv e-Node T w o-Fiber BLSR Figure 12- 9 sho ws the shelf assemb l ...

  • Cisco Systems 15454-FTF2 - page 422

    12-12 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapte r 12 SONET Topol ogies and Upgrade s 12.2.4 BLS R Applicatio n Exampl e Figur e 12 -9 Shelf Asse mbly La y out for N ode 0 in F igur e 12-8 Figure 12- 10 shows the shelf assembly layout for the remaini ng sites in the ring. In this BLSR conf igu ration, an addi tional eig ht DS-3s a ...

  • Cisco Systems 15454-FTF2 - page 423

    12-13 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 2 SONET Topologi es and Upgr ades 12.2.5 BLSR Fiber Conn ections 12.2.5 BLSR Fiber Connec tions Plan your fiber connect ions and u se the sam e plan fo r all BLSR nod es. For exampl e, make the east port the f arthest sl ot to the rig ht and the west port th e fart hest slot to ...

  • Cisco Systems 15454-FTF2 - page 424

    12-14 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapte r 12 SONET Topol ogies and Upgrade s 12.3 Path Pro tection Figur e 12 -12 Connecting Fibe r to a F our -Node, Four -Fiber BLSR 12.3 Path Protection Path Protect ion Configurati ons(PPC) p rovide duplica te fiber paths ar ound t he ring. W orki ng traffic flows in one direction and p ...

  • Cisco Systems 15454-FTF2 - page 425

    12-15 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 2 SONET Topologi es and Upgr ades 12.3 Path Prot ection The path protect ion circuit limit is th e sum of the opt ical band width contai ning 84 section d ata communi cation cha nnels ( SDCCs) or 28 line da ta com munica tion ch anne ls (L DCCs), d i vided by two if you are us ...

  • Cisco Systems 15454-FTF2 - page 426

    12-16 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapte r 12 SONET Topol ogies and Upgrade s 12.3 Path Pro tection Figur e 12 -14 Pa th Pr ot ection w ith a Fibe r Br eak Figure 12- 15 shows a common path pro tectio n applica tion. O C-3 optics provide remo te switch connec tivity to a hos t T elco rdia T R-303 swi tch. In the exa mple, ...

  • Cisco Systems 15454-FTF2 - page 427

    12-17 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 2 SONET Topologi es and Upgr ades 12.3 Path Prot ection Figur e 12 -15 Four -P or t, OC-3 P ath Prot ection Node I D 0 ha s four D S1-14 cards to provide 5 6 ac tiv e DS-1 ports. The o ther sit es onl y requi re two DS1-14 c ards to ha ndle the eight DS-1s to and from the remot ...

  • Cisco Systems 15454-FTF2 - page 428

    12-18 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapte r 12 SONET Topol ogies and Upgrade s 12.3 Path Pro tection Figur e 12 -16 Lay out of Node ID 0 in the O C-3 P ath Prot ection Exam ple in Figu re 12-15 In the Figu re 12-1 5 on p age 12- 17 exam ple, Nodes I Ds 1 t o 3 eac h cont ain two DS1-14 c ards and t wo OC3 IR 4 1310 cards. E ...

  • Cisco Systems 15454-FTF2 - page 429

    12-19 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 2 SONET Topologi es and Upgr ades 12.4 Dual-Ring Interconnect 12.4 Dual -Ring Interc onnect Dual-rin g interconnect (DRI) top ologies prov ide an extra le vel of path protectio n for circuits on interconnect ed rin gs. DRI allo ws users to interconnec t BLSRs, pat h protectio n ...

  • Cisco Systems 15454-FTF2 - page 430

    12-20 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapte r 12 SONET Topol ogies and Upgrade s 12.4.1 BLSR DRI Figure 12- 18 shows ONS 15454 nodes in a tradit ional BLSR-D RI topology w ith same-sid e routin g. In Ring 1, Nodes 3 an d 4 a re th e int erconne ct nod es, a nd in Ring 2, Nod es 8 an d 9 a re th e in terconne ct nodes. Du plic ...

  • Cisco Systems 15454-FTF2 - page 431

    12-21 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 2 SONET Topologi es and Upgr ades 12.4.1 BL SR DRI Figure 12- 19 shows ONS 1545 4 node s in a tr adition al B LSR-DRI to pology w ith opp osite-side routi ng. In Ring 1, Nodes 3 a nd 4 a re the int ercon nect no des, and i n Rin g 2, Node s 8 and 9 ar e the i nterc onnect nodes ...

  • Cisco Systems 15454-FTF2 - page 432

    12-22 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapte r 12 SONET Topol ogies and Upgrade s 12.4.1 BLSR DRI Figur e 12 -20 ONS 15454 Int egrat ed BLSR D ual-Ring I nter connec t Figure 12- 21 s hows an example of an i ntegra ted B LSR DRI on t he Edit Circ uits wind ow . Service Selector Secondary Path (protection) Primary Path (working ...

  • Cisco Systems 15454-FTF2 - page 433

    12-23 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 2 SONET Topologi es and Upgr ades 12.4.2 Path Protec tion DRI Figur e 12 -21 Integr at ed BLSR DRI on the Edit Cir cuits Window 12.4.2 Path Prot ection DRI Figure 12- 22 shows ONS 1 5454 no des i n a tradi tional drop-and -conti nue path protec tion DRI topolo gy . In Ring 1, N ...

  • Cisco Systems 15454-FTF2 - page 434

    12-24 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapte r 12 SONET Topol ogies and Upgrade s 12.4.2 Path Protect ion DRI Figur e 12 -22 ONS 15454 T r aditional P ath Pr otection Dual-R ing Int er connect Figure 12- 23 shows ONS 15454 nodes in an integrated DRI topology . The same drop- and-c ontin ue traf f ic ro uting oc curs at two no ...

  • Cisco Systems 15454-FTF2 - page 435

    12-25 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 2 SONET Topologi es and Upgr ades 12.4.2 Path Protec tion DRI Figur e 12 -23 ONS 15454 Int egrat ed P a th Pr ote ction Dual-Ring Int erc onnect Path Selector Primary Path, Primary Return Path, Secondary Return Path, Primary Primary Path, Secondary ONS 15454 Path Protection Con ...

  • Cisco Systems 15454-FTF2 - page 436

    12-26 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapte r 12 SONET Topol ogies and Upgrade s 12.4 .3 Pa th Pr ote cti on /BLSR DR I Han dof f Co nfig ura tion s 12.4.3 Path Protection/BLSR DRI Handoff Configurations Path protec tion configurati ons and BLSRs c an also be int erconn ected . In BL SR/pat h prote ctionD RI handoff configura ...

  • Cisco Systems 15454-FTF2 - page 437

    12-27 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 2 SONET Topologi es and Upgr ades 12.4.3 Path Protection/BLSR DRI Handoff Configurations Figur e 12 -25 ONS 15454 P ath Prot ection to BLSR Int egr at ed DRI Hand of f Figure 12- 26 shows a path protec tion to BLSR integrated DR I handoff on the Edit Circ uits wind ow . Path Se ...

  • Cisco Systems 15454-FTF2 - page 438

    12-28 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapte r 12 SONET Topol ogies and Upgrade s 12.5 Compariso n of the Protection Schemes Figur e 12 -26 Pa th Pr ot ection t o BLSR Inte grat ed DRI Han dof f on the Detailed Cir cuit Ma p 12.5 Comp arison of the Protec tion Schemes T able 12-4 sh ows a compa rison o f th e differen t prot e ...

  • Cisco Systems 15454-FTF2 - page 439

    12-29 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 2 SONET Topologi es and Upgr ades 12.6 Subtending Ri ngs 12.6 Subten ding Rings The ONS 1 5454 sup ports up t o 84 SONET SDCCs or 28 SO NET LDC Cs with TCC 2/TCC2P c ards. See T able 12-1 on pa ge 12-2 for ring, SDCC, and LDCC in format ion. Subtendin g rings reduc e the num be ...

  • Cisco Systems 15454-FTF2 - page 440

    12-30 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapte r 12 SONET Topol ogies and Upgrade s 12.6 Subtending Rin gs Figur e 12 -28 Pa th Pr ot ection Su bten ding fr om a BLSR The ON S 15454 can su pport two BLSRs on the sam e node . This al lows you to depl oy an ONS 15454 i n application s requiring SONET Di gital Cross-c onnect System ...

  • Cisco Systems 15454-FTF2 - page 441

    12-31 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 2 SONET Topologi es and Upgr ades 12.7 Linear ADM Configu rations After su btending two BLSR s, you can ro ute c ircuits from no des in one ring to n odes in the se cond r ing. For ex ample, in Figure 12-29 y ou can ro ute a circ uit fro m Node 1 to Node 7. Th e circ uit wou ld ...

  • Cisco Systems 15454-FTF2 - page 442

    12-32 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapte r 12 SONET Topol ogies and Upgrade s 12.8 Path-Protected Mesh Networks Figur e 12 -31 Pa th-Pr ot ect ed Mes h Netw or k PPMN also allows spans with different SONET spee ds to be mixed toget her in “virtu al rings. ” Figure 12- 32 shows Nodes 1, 2, 3, and 4 in a standard OC -48 ...

  • Cisco Systems 15454-FTF2 - page 443

    12-33 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 2 SONET Topologi es and Upgr ades 12.9 Four-Sh elf Node Configu rations Figur e 12 -32 PPMN Vir tual Ring 12.9 Fou r-Shelf Node Conf igurations Y ou can link multiple ONS 15454s us ing their OC- N cards (that i s, create a f iber -optic bus) to accom modate more acc ess traffic ...

  • Cisco Systems 15454-FTF2 - page 444

    12-34 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapte r 12 SONET Topol ogies and Upgrade s 12.10 ST S around the Ri ng Figur e 12 -33 Four -Shelf Node Config ura tion 12.10 STS a round the Ring Y ou c an provision STS c ircuits w ith a sourc e endpoi nt and a destinati on end point o n the same no de, an d route the tra ff ic aroun d a ...

  • Cisco Systems 15454-FTF2 - page 445

    12-35 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 2 SONET Topologi es and Upgr ades 12.11 OC- N Spee d U pgrad es Figur e 12 -34 STS Ar ound the Ring 12.11 OC-N Sp eed Upgrades A span is the optic al fiber conn ecti on betwee n two ONS 15454 n odes. I n a span ( optic al spee d) upgr ade, the tr ansmissio n rate of a span is u ...

  • Cisco Systems 15454-FTF2 - page 446

    12-36 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapte r 12 SONET Topol ogies and Upgrade s 12.11 O C-N Spee d Upgra des • Four-port OC-3 to MRC -2.5G-4 • Single-po rt OC-12 to fou r-port OC-12 • Single-po rt OC-12 to OC -48 • Single-po rt OC-12 to OC -192 • Single-po rt OC-12 to MR C-12 • Single-po rt OC-12 to MR C-2.5G -4 ...

  • Cisco Systems 15454-FTF2 - page 447

    12-37 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 2 SONET Topologi es and Upgr ades 12.11 OC- N Spee d U pgrad es Note Replacing cards that are th e sam e spe ed are not con sidere d span upgra des. F or ex ample replac ing a four-port OC- 3 with an ei ght-por t OC-3 card or replacin g a single- port OC-1 2 with a fo ur-port O ...

  • Cisco Systems 15454-FTF2 - page 448

    12-38 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapte r 12 SONET Topol ogies and Upgrade s 12.11.1 Span Upgrad e Wizard Note Spa n upgrade s do not upgrad e SONET topologie s (for examp le, a 1+1 grou p to a two-fiber BLSR). Re fer to the Cisco O NS 15 454 Procedur e Guide for topology up grade proce dures. 12.11. 1 Span Upg rade Wizar ...

  • Cisco Systems 15454-FTF2 - page 449

    12-39 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 2 SONET Topologi es and Upgr ades 12.12.1 Unprotected P oint-to-Point or Linear ADM to Path Protection Circuit typ es supported fo r in-serv ice topology upg rades are: • STS, VT , and VT tunnels • V irtual concatenate d circuits (V CA T) • Unidirect ional a nd bidirect i ...

  • Cisco Systems 15454-FTF2 - page 450

    12-40 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapte r 12 SONET Topol ogies and Upgrade s 12.12.2 Point-to-Poi nt or Linea r ADM to Tw o-Fi ber BLSR Figur e 12 -35 Unprot ect ed P oint-to-P oint ADM to P ath Prot ection Conv ersion 12.12. 2 Point-to-P oint or Linear ADM to Two-Fib er BLSR A 1+1 point-t o-point or linear ADM to a two- ...

  • Cisco Systems 15454-FTF2 - page 451

    12-41 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 2 SONET Topologi es and Upgr ades 12.12.4 Two-Fiber BLSR to Four-Fiber BLS R 12.12. 4 Two-F iber BL SR to Four- Fiber BLS R CTC provides a wiza rd to co n vert two-fiber OC-48 o r OC-1 92 BLSRs to fo ur-f iber BLSRs. T o conv ert the BLSR, y ou must i nstall two O C-48 or OC -1 ...

  • Cisco Systems 15454-FTF2 - page 452

    12-42 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapte r 12 SONET Topol ogies and Upgrade s 12.12.5 Add or Remov e a Node fr om a Topology ...

  • Cisco Systems 15454-FTF2 - page 453

    CH A P T E R 13-1 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 13 Managemen t Network Connectivity This c hapter provid es an overview of ONS 154 54 da ta co mmuni cations network (DC N) con nectivity . Cisco Optic al Networki ng System (ON S) network co mmunicat ion is based on IP , incl uding communi cation betw een Ci sco Transport Co ...

  • Cisco Systems 15454-FTF2 - page 454

    13-2 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Cha pter 13 M ana gem ent Netw or k Co nnec tiv ity 13.2 IP Addr essing Sce narios • They can be con necte d to L ANs t hrough direct conn ections or a r outer . • IP subnettin g can cr eate multip le logica l ONS 15 454 networ ks within a single Class A, B, or C IP network. I f you do ...

  • Cisco Systems 15454-FTF2 - page 455

    13-3 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 3 Manageme nt Network Con nectivi ty 13.2.1 IP Scena rio 1: CTC an d ONS 15454s on Same Subnet 13.2.1 IP Scenario 1: CTC an d ONS 15454s on Sam e Subne t IP Scenario 1 shows a basic O NS 15454 LAN configuration ( Fi gure 13 -1 ) . The ONS 15454 s and CTC comp uter resi de on th ...

  • Cisco Systems 15454-FTF2 - page 456

    13-4 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Cha pter 13 M ana gem ent Netw or k Co nnec tiv ity 13.2.3 IP Scen ario 3: Using Pro xy ARP to Ena ble an ONS 15 454 Gatew ay Figur e 13 -2 IP Sce nar io 2: CTC and O NS 15454 Nodes Connect ed t o a Rou ter 13.2.3 IP Scenario 3: Using P roxy ARP to Enable an ONS 15454 Gate way ARP match es ...

  • Cisco Systems 15454-FTF2 - page 457

    13-5 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 3 Manageme nt Network Con nectivi ty 13.2.3 IP Scenario 3: Using Proxy ARP to En able an ONS 15454 Ga teway IP Scenario 3 is similar to IP Scena rio 1, bu t only one ONS 15454 (1) connec ts to the LAN ( Figure 13-3 ). T wo ONS 15454s (2 and 3) co nnect to ONS 154 54 1 throu gh t ...

  • Cisco Systems 15454-FTF2 - page 458

    13-6 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Cha pter 13 M ana gem ent Netw or k Co nnec tiv ity 13.2.4 IP Scen ario 4: Defa ult Gatew ay on a CTC Comp uter In Figur e 13-4 , Node 1 annou nces to Node 2 and 3 that it can reac h the CTC host . Similar ly , Node 3 announc es th at it c an r each the ONS 152xx. T he ON S 152xx is shown a ...

  • Cisco Systems 15454-FTF2 - page 459

    13-7 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 3 Manageme nt Network Con nectivi ty 13.2.5 IP Scenario 5: Using Static Rou tes to Connect to LANs Figu re 13-5 IP Sc enario 4: Default Gateway on a CT C Co mp uter 13.2.5 IP Scenario 5: Using S tatic Rout es to Conne ct to LANs Stati c rout es a re u sed fo r two p urp oses: ? ...

  • Cisco Systems 15454-FTF2 - page 460

    13-8 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Cha pter 13 M ana gem ent Netw or k Co nnec tiv ity 13.2.5 IP Scen ario 5: Using St atic Routes t o Connect to LA Ns Figu re 13-6 I P Sc enario 5: St ati c Rou te Wit h One C TC Comp uter Use d as a D esti na tion The destination and subnet mask entries control ac cess to the ONS 15454s: ? ...

  • Cisco Systems 15454-FTF2 - page 461

    13-9 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 3 Manageme nt Network Con nectivi ty 13.2.5 IP Scenario 5: Using Static Rou tes to Connect to LANs Figur e 13 -7 IP Scenar io 5: Static Route With Multipl e LAN Destina tions CTC Workstation IP Address 192.168.1.100 Subnet Mask 255.255.255.0 Default Gateway = 192.168.1.1 Host Ro ...

  • Cisco Systems 15454-FTF2 - page 462

    13-10 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Cha pter 13 M ana gem ent Netw or k Co nnec tiv ity 13.2.6 IP Scenario 6 : Using OSPF 13.2.6 IP Scenario 6: Using OS PF Open Shortest Path First (OSPF) is a link state Internet routing protocol. Lin k st ate protocols use a “hel lo protocol” to moni tor their links wi th adjacen t rout ...

  • Cisco Systems 15454-FTF2 - page 463

    13-11 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 3 Manageme nt Network Con nectivi ty 13.2.6 IP Scen ario 6: Using OSP F Figur e 13 -8 IP Sce nar io 6: O SPF En abled CTC Workstation IP Address 192.168.1.100 Subnet Mask 255.255.255.0 Default Gateway = 192.168.1.1 Host Routes = N/A Router IP Address of interface “A” to LAN ...

  • Cisco Systems 15454-FTF2 - page 464

    13-12 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Cha pter 13 M ana gem ent Netw or k Co nnec tiv ity 13.2.7 IP Scenario 7: Provisi oning the ONS 15454 SOCKS Proxy Server Figur e 13 -9 IP Scenar io 6: OSPF N ot Enable d 13.2.7 IP Scenario 7: Provisio ning the ONS 15454 S OCKS Prox y Ser ver The ON S 1 5454 SOC KS proxy i s an app licatio ...

  • Cisco Systems 15454-FTF2 - page 465

    13-13 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 3 Manageme nt Network Con nectivi ty 13.2.7 IP Scenar io 7: Provision ing the ONS 15454 S OCKS Proxy Server The O NS 154 54 gateway set ting pe rforms the f ollowing ta sks: • Isolates DCC IP tra ff ic from Eth ernet (craf t port) traf f ic and a ccepts p acket s based on f i ...

  • Cisco Systems 15454-FTF2 - page 466

    13-14 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Cha pter 13 M ana gem ent Netw or k Co nnec tiv ity 13.2.7 IP Scenario 7: Provisi oning the ONS 15454 SOCKS Proxy Server • Exte rnal N etwo rk El emen t (EN E)—If set a s an ENE, th e ON S 1 5454 ne ither ins tall s nor ad vertise s defau lt or static routes . CTC com puters can c ommu ...

  • Cisco Systems 15454-FTF2 - page 467

    13-15 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 3 Manageme nt Network Con nectivi ty 13.2.7 IP Scenar io 7: Provision ing the ONS 15454 S OCKS Proxy Server Figur e 13 -1 1 IP Scenar io 7: ONS 15454 SOCKS Pr o xy Server wi th GNE and ENEs on the Same Subnet T able 13-2 sh ows recommende d setti ngs for O NS 15 454 G NEs and E ...

  • Cisco Systems 15454-FTF2 - page 468

    13-16 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Cha pter 13 M ana gem ent Netw or k Co nnec tiv ity 13.2.7 IP Scenario 7: Provisi oning the ONS 15454 SOCKS Proxy Server Figur e 13 -12 IP Scenar io 7: ONS 1 5454 SOCKS Pr o xy Server wi th GNE and ENEs on Dif f erent Subnets 71674 Remote CTC 10.10.20.10 10.10.20.0/24 10.10.10.0/24 Interfa ...

  • Cisco Systems 15454-FTF2 - page 469

    13-17 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 3 Manageme nt Network Con nectivi ty 13.2.7 IP Scenar io 7: Provision ing the ONS 15454 S OCKS Proxy Server Figur e 13 -13 IP Scenar io 7: ONS 1545 4 SOCKS Pr o xy Serv er With ENEs on Multiple Rings T able 13-3 sho ws the rul es that the ONS 15454 follo ws to fil ter pack ets ...

  • Cisco Systems 15454-FTF2 - page 470

    13-18 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Cha pter 13 M ana gem ent Netw or k Co nnec tiv ity 13.2.8 IP Scen ario 8: Dual GNEs on a Sub net If you imple ment the SOCKS proxy server , note t hat all DC C-conn ected ONS 15 454s o n the same Ether net segmen t must have the same gateway set ting. Mixed values prod uce u npred ictabl ...

  • Cisco Systems 15454-FTF2 - page 471

    13-19 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 3 Manageme nt Network Con nectivi ty 13.2.8 IP Scen ario 8: Dual GN Es on a Su bnet Figur e 13 -14 IP Scenar io 8: Dual GNEs on the Sam e Subnet Figure 13- 15 shows a network with dual GNEs on dif ferent subnets. 115258 Remote CTC 10.10.20.10 10.10.20.0/24 10.10.10.0/24 Interfa ...

  • Cisco Systems 15454-FTF2 - page 472

    13-20 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Cha pter 13 M ana gem ent Netw or k Co nnec tiv ity 13.2.9 IP Scen ario 9: IP Add ressi ng with Secure Mode Ena bled Figur e 13 -15 IP Scenar io 8: Dual GNEs on Di ff eren t Subnets 13.2.9 IP Scenario 9: IP Addres sing with S ecure Mode Enab led The TC C2 card and TC C2P card both defaul t ...

  • Cisco Systems 15454-FTF2 - page 473

    13-21 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 3 Manageme nt Network Con nectivi ty 13.2.9 IP Scenario 9: IP Addressing with S ecure Mode Enabled enabled, the IP addresses pro visioned for both TCC2P TCP/IP LAN ports must follo w general IP addressi ng gu idelin es an d must reside on different subnet s from each other and ...

  • Cisco Systems 15454-FTF2 - page 474

    13-22 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Cha pter 13 M ana gem ent Netw or k Co nnec tiv ity 13.2.9 IP Scen ario 9: IP Add ressi ng with Secure Mode Ena bled Figur e 13 -16 IP Scenar io 9: ONS 1545 4 GNE an d ENEs on the Same S ubnet with S ecur e Mode Enabled Figure 13- 17 shows an exampl e of ON S 15454 nod es co nnect ed to a ...

  • Cisco Systems 15454-FTF2 - page 475

    13-23 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 3 Manageme nt Network Con nectivi ty 13.2.9 IP Scenario 9: IP Addressing with S ecure Mode Enabled Figur e 13 -1 7 IP Scen ar io 9: O NS 1545 4 GNE an d ENEs on Dif f erent Subn ets wit h Secur e Mode Enabled 13.2.9.2 Secure Node Locked and Unlocked Behavior Secure m ode can op ...

  • Cisco Systems 15454-FTF2 - page 476

    13-24 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Cha pter 13 M ana gem ent Netw or k Co nnec tiv ity 13.3 Routing Ta ble 13.3 Routin g Table ONS 15454 ro uting i nforma tion ap pears on th e Maint enanc e > Routin g T able tab. The routing ta ble provid es the follo wing informa tion: • Destinat ion—Displ ays the IP ad dress of th ...

  • Cisco Systems 15454-FTF2 - page 477

    13-25 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 3 Manageme nt Network Con nectivi ty 13.4 External Firewalls • Mask (2 55.255 .255.255 ) is a 32 bit ma sk, m eaning that on ly th e 172 .20.2 14.92 ad dress is a destination. • Gate wa y (127.0.0. 1) is a loopback address. T he host d irects n etwork traf f ic to it self u ...

  • Cisco Systems 15454-FTF2 - page 478

    13-26 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Cha pter 13 M ana gem ent Netw or k Co nnec tiv ity 13.4 E xternal Firewa lls The fo llowing A CL example shows a fire wall configuration wh en the SOCKS pro xy server gateway setting is not enabled . In the exampl e, the CTC workstation' s address is 192.168.10.10. and the ONS 15454 ...

  • Cisco Systems 15454-FTF2 - page 479

    13-27 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 3 Manageme nt Network Con nectivi ty 13.5 Open GNE access-list 100 remark *** allows initial contact with the 15454 using http (port 80) *** access-list 100 remark access-list 100 permit tcp host 192.168.10.10 host 10.10.10.100 eq 1080 access-list 100 remark *** allows CTC comm ...

  • Cisco Systems 15454-FTF2 - page 480

    13-28 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Cha pter 13 M ana gem ent Netw or k Co nnec tiv ity 13.5 Open GNE Figur e 13 -18 Pro xy and Fir ew all T unnels fo r Fo r eign T er minations Figure 13- 19 shows a remote nod e conne cted to an ENE Ethe rnet port. Proxy and firewall tunnels are useful in this example becau se the GNE would ...

  • Cisco Systems 15454-FTF2 - page 481

    13-29 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 3 Manageme nt Network Con nectivi ty 13.6 TCP/IP and OSI Netw orki ng Figur e 13 -19 For eign Node Connec tion t o an ENE Ether ne t P or t 13.6 TCP/I P and OSI Networking ONS 15454 DCN comm unication is based on the TC P/IP protocol sui te. Howe ver , ONS 15454s can also be ne ...

  • Cisco Systems 15454-FTF2 - page 482

    13-30 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Cha pter 13 M ana gem ent Netw or k Co nnec tiv ity 13.6.1 Point-to-Point Protocol 13.6.1 Point-to-Point Protocol PPP is a data link (Layer 2) encapsulation protocol th at transports datagram s ov er point-to-point links. Although PPP was dev eloped to transport IP tr aff ic , it can carry ...

  • Cisco Systems 15454-FTF2 - page 483

    13-31 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 3 Manageme nt Network Con nectivi ty 13.6.2 Link Access Pro tocol on the D C hannel 13.6.2 Link Access Protoc ol on the D Channel LAP-D i s a d ata link protoc ol us ed in the OS I pro tocol st ack. LA P-D is assigne d when you provision an ONS 15454 SD CC as OSI-o nly . Provis ...

  • Cisco Systems 15454-FTF2 - page 484

    13-32 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Cha pter 13 M ana gem ent Netw or k Co nnec tiv ity 13.6.3 OSI Conne ctionless Net work Service CLNP uses networ k servic e access poin ts (NSAPs) to id entify net work devices. The CLNP source and destination add resses are NSAPs. In addition, CLNP uses a netwo rk element title (NET) to i ...

  • Cisco Systems 15454-FTF2 - page 485

    13-33 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 3 Manageme nt Network Con nectivi ty 13.6.3 OSI Connectionless Network Service Figure 13- 20 shows th e ISO-DCC NS AP address with the def ault v alues deli vered with the ONS 1 5454. The Syste m ID is auto matic ally p opulated with th e node MAC address. Figur e 13 -20 ISO-DC ...

  • Cisco Systems 15454-FTF2 - page 486

    13-34 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Cha pter 13 M ana gem ent Netw or k Co nnec tiv ity 13.6.4 OSI Routing Figu re 13-21 OS I Ma in Se tup This add ress is also the Route r 1 primary manual are a addr ess, whic h is vie wed and edite d on the Provisioning > O SI > Route rs subtab. See the “13.6. 7 OSI V ir tual Rou t ...

  • Cisco Systems 15454-FTF2 - page 487

    13-35 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 3 Manageme nt Network Con nectivi ty 13.6.4 OSI Routing In OSI networki ng, disc overy is based on annou ncemen ts. An ES uses th e ES-IS pro tocol end syst em hello (ESH) me ssage to an nounce i ts presence to ISs and ESs conne cted to the sam e network. Any ES or IS that is l ...

  • Cisco Systems 15454-FTF2 - page 488

    13-36 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Cha pter 13 M ana gem ent Netw or k Co nnec tiv ity 13.6.4 OSI Routing • Interm ediate System Lev el 1/L ev el 2— The ONS 154 54 perf orms I S func tions. I t co mmunic ates with IS and ES nodes that reside within its OSI area. It a lso communic ates with IS L1/L2 nodes t hat reside i ...

  • Cisco Systems 15454-FTF2 - page 489

    13-37 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 3 Manageme nt Network Con nectivi ty 13.6.5 TARP 13.6.5 TARP T A RP is used when TL1 tar get identif iers (TID s) must be translated to NSAP addresses. The TID-to-N SAP tr anslati on occu rs by map ping TI Ds to the NETs, then deriving NS APs fr om the NETs by using the NSAP se ...

  • Cisco Systems 15454-FTF2 - page 490

    13-38 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Cha pter 13 M ana gem ent Netw or k Co nnec tiv ity 13.6.5 TARP 13.6.5.1 TARP Processing A T ARP data cac he (TDC) i s crea ted at each NE to f acilita te T ARP processing. I n CTC, the TDC is displaye d and man aged on t he node view Mai ntenance > OSI > TD C subta b . The TD C subt ...

  • Cisco Systems 15454-FTF2 - page 491

    13-39 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 3 Manageme nt Network Con nectivi ty 13.6.5 TARP 13.6.5.2 TARP Loop Detection Buffer The T ARP loop det ection buffer (LDB) can be ena bled to prev ent dupl icate T ARP PDUs fr om enter ing the TDC . When a T ARP T ype 1 , 2, or 4 PDU arri v es, T ARP checks its LDB for a NET a ...

  • Cisco Systems 15454-FTF2 - page 492

    13-40 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Cha pter 13 M ana gem ent Netw or k Co nnec tiv ity 13.6.6 TCP/IP and O SI Mediat ion Figur e 13 -23 Manual T ARP Adj acencies 13.6.5.4 Manual TID to NSAP Provisioning TIDs can be manually link ed to NSAPs and added to the TDC. Static TDC en tries are similar to static routes. F or a speci ...

  • Cisco Systems 15454-FTF2 - page 493

    13-41 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 3 Manageme nt Network Con nectivi ty 13.6.7 OSI Virtual Rout ers Figur e 13 -24 T–TD Pro toc ol Flo w • FT–TD—Pe rforms an FT P con v ersion be tween FT AM and FTP . T he FT–TD gateway entity include s an FT AM responder (serv er) and an FTP client, allo wing FT AM in ...

  • Cisco Systems 15454-FTF2 - page 494

    13-42 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Cha pter 13 M ana gem ent Netw or k Co nnec tiv ity 13.6.7 OSI Virtual Routers Figur e 13 -26 Pro vision ing OSI Rout er s Each router has an edit able ma nual ar ea a ddress and a unique NSAP Sy stem I D that is set to the no de MA C address + n . For Router 1, n = 0. F or Router 2, n = 1 ...

  • Cisco Systems 15454-FTF2 - page 495

    13-43 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 3 Manageme nt Network Con nectivi ty 13 .6.8 I P-o ver -CLNS Tunn els Each O SI vi rtual rout er has a pri mar y manua l are a addr ess. Y o u can a lso creat e two ad dit ional ma nual area addre sse s. Th ese m anua l are a addr esse s ca n be used to: • Split up an are a? ...

  • Cisco Systems 15454-FTF2 - page 496

    13-44 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Cha pter 13 M ana gem ent Netw or k Co nnec tiv ity 13.6.8 IP-over- CLNS Tunnels Figu re 13-27 IP -over -CLNS T un nel Flow 13.6.8.1 Provisioning IP-over-CLNS Tunnels IP-over -CLNS tunne ls must be carefu lly plann ed to prevent nodes from losin g visibi lity or con nectivity . Before you ...

  • Cisco Systems 15454-FTF2 - page 497

    13-45 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 3 Manageme nt Network Con nectivi ty 13 .6.8 I P-o ver -CLNS Tunn els If you are provisioni ng a n IP-over-CLNS tun nel on a Cisc o rou ter , always f ollow proce dures provided in the Cisco IOS docum entati on for the router y ou are provisioni ng. For info rmati on about ISO ...

  • Cisco Systems 15454-FTF2 - page 498

    13-46 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Cha pter 13 M ana gem ent Netw or k Co nnec tiv ity 13.6.8 IP-over- CLNS Tunnels Figu re 13-28 IP -over -C LNS T un nel S cenario 1: ONS NE to Othe r V ende r GNE 13.6.8.3 IP-over-CLNS Tunnel Scenario 2: ONS Node to Router Figure 13- 29 shows an IP-over-CLNS tunnel fro m an ONS nod e to a ...

  • Cisco Systems 15454-FTF2 - page 499

    13-47 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 3 Manageme nt Network Con nectivi ty 13 .6.8 I P-o ver -CLNS Tunn els clns routing interf ace c tunnel 102 ip add ress 10.1 0.30. 30 255.2 55.255 .0 ctunne l destina tion 39.840F .8 0.1111.0 000.11 11.1111.d dddddd ddddd. 00 interf ace Ethern et0/ 1 clns route r isis router isi ...

  • Cisco Systems 15454-FTF2 - page 500

    13-48 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Cha pter 13 M ana gem ent Netw or k Co nnec tiv ity 13.6.8 IP-over- CLNS Tunnels ONS NE 1 IP-over -CLNS tunne l provisioning: • Destinat ion: R outer 2 I P add ress • Mask: 255.2 55.255 .255 for host route (CTC 1 only), or 255.255.25 5.0 for subn et rou te (all CTC comp uters on t he s ...

  • Cisco Systems 15454-FTF2 - page 501

    13-49 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 3 Manageme nt Network Con nectivi ty 13.6.9 OSI/IP Networking Scenarios Figu re 13-30 IP -over -CLNS T unne l S cenario 3: ONS Node to Router Across an OS I DCN 13.6.9 OSI/IP Networking Scenarios The following eight scenari os show e xampl es of ONS 15454 s in networks with OSI ...

  • Cisco Systems 15454-FTF2 - page 502

    13-50 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Cha pter 13 M ana gem ent Netw or k Co nnec tiv ity 13.6.9 OSI/IP Net working Sc enarios • All ONS 15454 NEs participating in an OSI netw ork run OSI ov er PPP between themselv es. This is needed so that other vendor G NEs can route TL 1 comm ands to a ll ONS 15 454 NE s participa ting i ...

  • Cisco Systems 15454-FTF2 - page 503

    13-51 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 3 Manageme nt Network Con nectivi ty 13.6.9 OSI/IP Networking Scenarios Figur e 13 -32 OSI/IP Scenar io 2: IP OSS , IP DCN, ON S GNE, OSI DCC, a nd Othe r V endo r ENE The ONS 15 454 GNE rout es TL1 tra ff ic to the correct N E by re solving the TL 1 TID to eithe r an IP or NSA ...

  • Cisco Systems 15454-FTF2 - page 504

    13-52 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Cha pter 13 M ana gem ent Netw or k Co nnec tiv ity 13.6.9 OSI/IP Net working Sc enarios OSS-initiated software down loads consi st of two part s: the OSS to destinati on NE TL1 do wnload request and the f ile transfer . The TL1 request is handle d the same as described in the pre vious pa ...

  • Cisco Systems 15454-FTF2 - page 505

    13-53 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 3 Manageme nt Network Con nectivi ty 13.6.9 OSI/IP Networking Scenarios Figur e 13 -33 OSI/IP Scenar io 3: IP OSS , IP DCN, Ot her V e ndor GNE, OSI DCC, and ONS ENE Figure 13- 34 sho ws the same s cenario, e xcept t he IP-o v er -CLNS t unnel endpoin t is th e GNE rather than ...

  • Cisco Systems 15454-FTF2 - page 506

    13-54 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Cha pter 13 M ana gem ent Netw or k Co nnec tiv ity 13.6.9 OSI/IP Net working Sc enarios Figur e 13 -34 OSI/IP Scenar io 3 with OS I/IP -ov er - CLNS T unnel Endp oint at the G NE 13.6.9.4 OSI/IP Scenario 4: Multiple ONS DCC Areas OSI/IP S cenari o 4 ( Figure 13 -35 ) is si milar to OSI/IP ...

  • Cisco Systems 15454-FTF2 - page 507

    13-55 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 3 Manageme nt Network Con nectivi ty 13.6.9 OSI/IP Networking Scenarios Figur e 13 -35 OSI/IP Scenar io 4: Multiple ONS DCC Ar eas 13.6.9.5 OSI/IP Scenario 5: GNE Without an OSI DCC C onnection OSI/IP S cenari o 5 ( Figure 13 -36 ) is si mila r to OSI/ IP Scen ario 3 excep t th ...

  • Cisco Systems 15454-FTF2 - page 508

    13-56 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Cha pter 13 M ana gem ent Netw or k Co nnec tiv ity 13.6.9 OSI/IP Net working Sc enarios Figur e 13 -36 OSI/IP Scenar io 5: GNE Witho ut an OSI DCC Connec tion 13.6.9.6 OSI/IP Scenario 6: IP OSS, OSI DCN, ONS GNE, OSI DCC, and O ther Vendor ENE OSI/IP Scen ario 6 ( Figure 13-3 7 ) shows ho ...

  • Cisco Systems 15454-FTF2 - page 509

    13-57 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 3 Manageme nt Network Con nectivi ty 13.6.9 OSI/IP Networking Scenarios Figur e 13 -37 OSI/IP Scenar io 6: IP OSS , OSI DCN, ONS GNE, OSI DCC, and Other V endor ENE 13.6.9.7 OSI/IP Scenario 7: OSI OSS, OS I DCN, Other Ve nder GNE, OSI DC C, and ONS NEs OSI/IP S cenari o 7 ( Fig ...

  • Cisco Systems 15454-FTF2 - page 510

    13-58 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Cha pter 13 M ana gem ent Netw or k Co nnec tiv ity 13.6.9 OSI/IP Net working Sc enarios Figur e 13 -38 OSI/IP Scenar io 7: OSI OSS , OSI DCN, O ther V e nder GNE, OSI DCC, and ON S NEs In Euro pean network s: • CTC and CTM a re used for ma nageme nt only . • IP-over -CLNS tunne ls are ...

  • Cisco Systems 15454-FTF2 - page 511

    13-59 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 3 Manageme nt Network Con nectivi ty 13.6.9 OSI/IP Networking Scenarios • TL1 mana gement is not requir ed. • FTP f ile tra nsfer is not requ ired. • TL1 and FT AM to FTP media tion is not requ ired . Managem ent traffic between CTC/CT M and ONS 15454 NEs is carrie d over ...

  • Cisco Systems 15454-FTF2 - page 512

    13-60 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Cha pter 13 M ana gem ent Netw or k Co nnec tiv ity 13.6.9 OSI/IP Net working Sc enarios Figur e 13 -39 OSI/IP Scenar io 8: OSI OSS , OSI DCN, ONS GN E, OSI DCC, and Other V ender NEs 1 The O NS NEs are mana ged by CTC/ CTM on ly (TL 1/FT P is n ot us ed). 2 The OSI OSS man ages othe r ven ...

  • Cisco Systems 15454-FTF2 - page 513

    13-61 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 3 Manageme nt Network Con nectivi ty 13.6.10 Provisioning OSI in CTC 13.6.10 Provisioning OSI in CTC T able 13-15 s hows the OSI ac tions tha t are pe rforme d from the nod e view Provisioning tab . Refer to the Cisco ONS 15454 Pr ocedure Guide fo r OSI pr oced ures and ta sks. ...

  • Cisco Systems 15454-FTF2 - page 514

    13-62 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Cha pter 13 M ana gem ent Netw or k Co nnec tiv ity 13.7 IPv6 Net work Com pat ibil ity 13.7 IPv6 Network Compati bility Cisco ON S 15xx x prod ucts c an f unction in an IPv6 n etwork wh en a n inte rnet router that suppo rts Network Addr ess Translation - Proto col Translation (NA T -PT) ...

  • Cisco Systems 15454-FTF2 - page 515

    CH A P T E R 14-1 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 14 Alarm Monitoring an d Management This c hapter d escrib es Cisco Transport Con troller ( CTC) alarm manage ment. T o trou bleshoo t specific alarm s, refe r to th e Cisco O NS 15454 T r oub leshooti ng Guide . Chapter topics includ e: • 14.1 O verview , page 14-1 • 14. ...

  • Cisco Systems 15454-FTF2 - page 516

    14-2 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapt er 14 Al arm M onit orin g an d M anage men t 14.3 Ala rm Information The ONS 154 54 has a one-button updat e for some comm only viewed alarm coun ts. If you press the Slo t button once and the n wait eigh t seconds , the disp lay automa tical ly chan ges from a slot alar m count to a ...

  • Cisco Systems 15454-FTF2 - page 517

    14-3 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 4 Alarm Monitoring and Mana gement 14.3 Alarm Information Note When an entity is put in the OOS,MT administrati v e state, the ONS 15454 suppresses all standin g alarms on that entity . All alar ms and events appear on th e Conditi ons tab. Y ou can c hange t his behavio r for t ...

  • Cisco Systems 15454-FTF2 - page 518

    14-4 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapt er 14 Al arm M onit orin g an d M anage men t 14.3.1 Vie wing Alarms Wit h Each Node’s Time Z one 14.3.1 Viewing Alarms With Each No de’s T ime Zo ne By def ault, ala rms and cond itions are displayed with the tim e stamp of the CTC w orkstatio n where you are vi ewing them . B ut ...

  • Cisco Systems 15454-FTF2 - page 519

    14-5 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 4 Alarm Monitoring and Mana gement 14.3.4 Viewing Alarm-Affect ed Circuits 14.3.4 Viewing Alar m-Affected Circuits A user can view which ONS 1545 4 circuit s are affecte d by a specific alarm by positioning t he cur sor ov er the alarm in the Alarm windo w and right-clic king. A ...

  • Cisco Systems 15454-FTF2 - page 520

    14-6 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapt er 14 Al arm M onit orin g an d M anage men t 14.3 .6 Co ntr oll ing th e C ond itio ns Di sp lay 14.3.6 Controlling the Conditions Display Y ou ca n control t he display of the condi tions on the Con ditio ns window . Ta b l e 1 4 - 4 shows th e actions you ca n per form i n the wind ...

  • Cisco Systems 15454-FTF2 - page 521

    14-7 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 4 Alarm Monitoring and Mana gement 14.3.7 Viewing History 14.3.6.3 Filtering Conditions The co ndition displ ay can be filtered to prevent display of cond itions (i ncluding a larms) w ith cert ain se veri ties or that occurred between certa in dates. Y ou can set the f iltering ...

  • Cisco Systems 15454-FTF2 - page 522

    14-8 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapt er 14 Al arm M onit orin g an d M anage men t 14.3.7 Viewing H istory If you chec k the Hist ory wind ow Alarms chec k box, you disp lay the node history of alarm s. If you ch eck the Events check box , you display the node history of Not Alarmed and transient e vents (conditions). If ...

  • Cisco Systems 15454-FTF2 - page 523

    14-9 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 4 Alarm Monitoring and Mana gement 14.3.8 Alarm History and Log Buffer Capacities on the card in the History > Ca rd window , or a hist ory of ala rms, co nditions, and transie nts that hav e occurred d uring your login sessi on in the History > Se ssion windo w . Y ou can ...

  • Cisco Systems 15454-FTF2 - page 524

    14-10 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapt er 14 Al arm M onit orin g an d M anage men t 14.5.1 Creating and Modify ing Alarm Profiles CTC can sto re up to t en active alarm profiles at any time to apply to the n ode. C ustom pro files can ta ke eight of these act i ve pr ofile positions. T w o other pro file s, Default pr of ...

  • Cisco Systems 15454-FTF2 - page 525

    14-11 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 4 Alarm Monitoring and Mana gement 14.5.2 Alarm Profile Butt ons Note Up to 10 profiles, i ncludin g th e two rese rved profiles (Inhe rited a nd D efault) c an be stored in CTC. Where v er it is applied, the Def ault alarm prof ile sets se verities to standard T elc ordia GR-2 ...

  • Cisco Systems 15454-FTF2 - page 526

    14-12 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapt er 14 Al arm M onit orin g an d M anage men t 14.5.3 Al arm Profile Editing 14.5.3 Alarm Profile Editing T able 14-8 li sts and d escribes the fiv e pro file-editin g opti ons available wh en yo u right -cli ck an alarm item in the p rofil e co lumn. 14.5.4 Alarm Sever ity Options T ...

  • Cisco Systems 15454-FTF2 - page 527

    14-13 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 4 Alarm Monitoring and Mana gement 14.5.6 Applying Alarm Profiles 14.5.6 Applying Alar m Profiles In CTC node vi e w , th e Alarm Beh avior window displays ala rm profiles for the node. In ca rd view , the Alarm B ehavior window displays th e alarm profiles for th e selecte d c ...

  • Cisco Systems 15454-FTF2 - page 528

    14-14 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapt er 14 Al arm M onit orin g an d M anage men t 14.6.2 Al arms Suppressed by User Command While the f ac ility is in the OOS, MT state, any alarms or conditio ns that are rai sed and su ppressed on it (for e xampl e, a transm it fai lure [TR MT] alarm ) are report ed in the Condition s ...

  • Cisco Systems 15454-FTF2 - page 529

    14-15 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 4 Alarm Monitoring and Mana gement 14.7.2 User Defined Alarm T ypes • Raised When—Open means tha t the normal condition is to not ha ve cu rrent flo wing throu gh the contact, and the alarm is generated wh en curr ent does flo w; closed means that the n ormal conditio n is ...

  • Cisco Systems 15454-FTF2 - page 530

    14-16 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapt er 14 Al arm M onit orin g an d M anage men t 14.7.3 External Controls ...

  • Cisco Systems 15454-FTF2 - page 531

    CH A P T E R 15-1 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 15 Performance Monitoring Performan ce monitoring (PM) parameters are use d by service provider s to gather , store, set thresholds for, and rep ort pe rform ance data for early det ection of p rob lems. In t his ch apte r , PM pa ramet ers a nd concepts are def ined for ele ...

  • Cisco Systems 15454-FTF2 - page 532

    15-2 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapte r 15 Perfor mance Mon itor ing 15.1 Threshol d Performa nce Mon itoring 15.1 Th reshold Performanc e Monitorin g Thresholds are use d to set e rror le v els for each PM parameter . Y ou can set i ndiv idual P M threshold values from the C isco Transport C ontrolle r (CTC) card view P ...

  • Cisco Systems 15454-FTF2 - page 533

    15-3 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 5 Performance Mo nitoring 15.2 Intermediate Path Performance Mo nitoring Due to m emory limita tions and the num ber of TCAs g enerated by d if ferent p latforms, you can ma nually add/modify the f ollo wing two properties to the platf orm property f ile (CTC.I NI for W in do ws ...

  • Cisco Systems 15454-FTF2 - page 534

    15-4 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapte r 15 Perfor mance Mon itor ing 15.3 Pointer Just ification Co unt Performa nce Moni toring ONS 15454 Sof tware R3.0 and hig her allows L T E car ds to monitor ne ar-end PM data on individual synchrono us transpo rt signal (STS ) payloads by enabling IPPM . After ena bling IPPM provis ...

  • Cisco Systems 15454-FTF2 - page 535

    15-5 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 5 Performance Mo nitoring 15.4 Perfo rmanc e Monito ring Pa ramet er Def initi ons 15.4 Perfo rmance Monitoring Parame ter Definitions T able 15-3 gives def inition s for eac h type of PM par ameter fo und in thi s chapte r . T able 15-3 Pe rfor mance Monit or ing P ara met ers ...

  • Cisco Systems 15454-FTF2 - page 536

    15-6 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapte r 15 Perfor mance Mon itor ing 15.4 Perfor mance Monitoring Parameter Defi nitions CVP-P Code V iolation Path (CVP-P) is a code vio lation pa rameter for M23 applicati ons. CVP-P is a count of P-bit pari ty errors occurri ng in the accumu lati on period . CV -S Sectio n Codi ng V iol ...

  • Cisco Systems 15454-FTF2 - page 537

    15-7 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 5 Performance Mo nitoring 15.4 Perfo rmanc e Monito ring Pa ramet er Def initi ons ESR-SM Secti on Monitorin g Errored Seconds Ratio (ESR-SM) indicates the errore d seconds ratio rec orded i n the O TN section d uring the PM tim e inte rval. ES-S Sectio n Errore d Sec onds (ES- ...

  • Cisco Systems 15454-FTF2 - page 538

    15-8 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapte r 15 Perfor mance Mon itor ing 15.4 Perfor mance Monitoring Parameter Defi nitions LOFC Loss of Frame Cou nt (LOFC) LOSS-L Line Loss of Signal (LOSS-L) is a count of one-seco nd interv als co ntain ing on e or mo re LOS de fe cts. NIOS No n-Idle Order ed Se ts (NI OS) is a co unt of ...

  • Cisco Systems 15454-FTF2 - page 539

    15-9 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 5 Performance Mo nitoring 15.4 Perfo rmanc e Monito ring Pa ramet er Def initi ons PPJC-PGEN-P P ositi ve Poin ter Justif ication Count , STS Path Ge nerated (PPJC-PGEN -P) is a count of the positi ve poin ter justif icatio ns generated fo r a particular path to reconci le the f ...

  • Cisco Systems 15454-FTF2 - page 540

    15-10 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapte r 15 Perfor mance Mon itor ing 15.4 Perfor mance Monitoring Parameter Defi nitions PSD-R In a four-f iber BLSR, Protec tion Switchin g Duration-Ring (PSD-R) is a coun t of the secon ds that th e pr otectio n line w as u sed to ca rry s ervice. A count is only incr emented i f ring s ...

  • Cisco Systems 15454-FTF2 - page 541

    15-11 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 5 Performance Mo nitoring 15.4 Perfo rmanc e Monito ring Pa ramet er Def initi ons SES-SM Section Monitoring Seve rely Errored Seconds ( SES-SM) indicates the se ver ely er rored second s recorded in the O TN section during th e PM tim e inte rval. SESR-PM Path Monitoring Se ve ...

  • Cisco Systems 15454-FTF2 - page 542

    15-12 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapte r 15 Perfor mance Mon itor ing 15.5 Performa nce Monit oring for Elect rical Card s 15.5 Perfo rmance Monitoring for Electrical Cards The fol lowing sect ions define PM parame ters f or the E C1-12 , DS1/E 1-56, DS1-1 4, DS1 N-14, D S3-12, DS3-1 2E, DS3 N-12, DS3N -12E, D S3i-N -12, ...

  • Cisco Systems 15454-FTF2 - page 543

    15-13 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 5 Performance Mo nitoring 15.5.1 EC1-12 Card Performanc e Monitor ing Paramet ers Note Th e XX in Figu re 15-2 represents all PMs listed in T able 15-4 wi th th e given prefix and/o r suffix. Figur e 15 -3 PM Read P oints on the EC1 -12 Car d T able 15-4 lists the PM p arameter ...

  • Cisco Systems 15454-FTF2 - page 544

    15-14 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapte r 15 Perfor mance Mon itor ing 15.5.2 DS1/E1 -56 Card Perf ormance Monitori ng Parameters Note If the CV -L(NE and FE) f alls in the range 5 1-61 f or EC1,then , the user might se e discre panc y in th e SES and th e UAS-L value s. H owe ver , ES-L will be in th e ne ares t accura c ...

  • Cisco Systems 15454-FTF2 - page 545

    15-15 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 5 Performance Mo nitoring 15.5.2 DS1/E1-56 Card Performanc e Monitori ng Paramet ers Figur e 15 -5 PM Read P oints on the DS1/ E1 -56 Card Tx/Rx LIU Ultramapper ASIC Stingra y ASIC DS-1 P ath Side E-1 Path Side This group of PMs are receiv ed from the f ar end. They only e xist ...

  • Cisco Systems 15454-FTF2 - page 546

    15-16 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapte r 15 Perfor mance Mon itor ing 15.5.3 DS1-14 and DS1N-1 4 Card Perfor mance Mo nitoring Parameters T able 15-5 lists the PM parameter s for the DS1/E1-56 card. 15.5.3 DS 1-14 and DS1N-14 C ard Perfo r mance Monito ring Parame ters Figure 15- 6 sho ws the signal types that support ne ...

  • Cisco Systems 15454-FTF2 - page 547

    15-17 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 5 Performance Mo nitoring 15.5.3 DS1-14 and DS1N-14 C ard Perform ance Monitor ing Paramet ers Figu re 15-7 P M Read Points on the D S1-14 and D S1N- 14 C ards T able 15-6 descri bes th e PM para met ers for the D S1-1 4 and DS1 N-14 car ds. Note Far -end DS1 performa nce monit ...

  • Cisco Systems 15454-FTF2 - page 548

    15-18 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapte r 15 Perfor mance Mon itor ing 15.5.4 DS3-12 and DS3N-1 2 Card Perfor mance Mo nitoring Parameters 15.5.3.1 DS-1 Facility Data Link Performance Mon itoring Facility Dat a Link (FDL) pe rform ance moni torin g enabl es an O NS 15454 D S1N-1 4 card to calcu late an d repo rt DS-1 erro ...

  • Cisco Systems 15454-FTF2 - page 549

    15-19 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 5 Performance Mo nitoring 15.5.5 DS3-12E a nd DS3N-12E Card Performanc e Monitori ng Paramet ers Figu re 15-9 P M Re ad Points on th e DS3 -12 a nd DS 3N- 12 C ards The PM para mete rs for the DS3- 12 and DS3N -12 cards ar e descri bed in T able 15-7 . 15.5.5 DS3-12E and DS3N-1 ...

  • Cisco Systems 15454-FTF2 - page 550

    15-20 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapte r 15 Perfor mance Mon itor ing 15.5.5 DS3- 12E and DS3 N-12E Car d Performa nce Mon itoring Par ameters Figur e 15 -1 0 Monit or ed Signal T ypes f or the DS3-12E a nd DS3N-1 2E Car ds Note Th e XX in Figu re 15-10 represen ts all PMs listed in T able 15-8 with the gi v en pref ix a ...

  • Cisco Systems 15454-FTF2 - page 551

    15-21 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 5 Performance Mo nitoring 15.5 .6 DS3i-N- 12 Card Pe rfo rmance Mon itori ng Param eters 15.5.6 DS3i-N- 12 Card Performan ce Mon itoring Para meters Figure 15- 12 shows the signal type s that support near-end and far-end PMs. Figur e 15 -12 Monitor ed Signal T ypes f or the DS3 ...

  • Cisco Systems 15454-FTF2 - page 552

    15-22 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapte r 15 Perfor mance Mon itor ing 15.5.6 DS3i-N-12 Card Performan ce Monito ring Parameters Figu re 15-13 PM R ead Points on the D S3i -N- 12 Card s T able 15-9 d escrib es the PM p aramete rs fo r the DS3 i-N-1 2 card. 110717 ONS 15454 DS3i-N-12 Card LIU Mux/Demux ASIC BTC ASIC XC Car ...

  • Cisco Systems 15454-FTF2 - page 553

    15-23 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 5 Performance Mo nitoring 15.5.7 DS3XM-6 C ard Perform ance Monitor ing Param eters 15.5.7 DS3XM-6 Card Perfor mance M onito ring Parame ters Figure 15- 14 shows the signal type s that support near-end and far-end PMs. Figur e 15 -14 Monitor ed Signal T ypes f or the DS3XM-6 Ca ...

  • Cisco Systems 15454-FTF2 - page 554

    15-24 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapte r 15 Perfor mance Mon itor ing 15.5.7 DS3XM-6 Card Pe rformance M onitoring Paramete rs Figu re 15-15 PM R ead Points on the D S3X M-6 C ard T able 15-10 lists the PM parameters for the DS3XM-6 cards. 78980 ONS 15454 DS3XM-6 Card LIU Mapper Unit BTC ASIC XC Card(s) OC-N DS1 Side VT ...

  • Cisco Systems 15454-FTF2 - page 555

    15-25 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 5 Performance Mo nitoring 15. 5.8 DS3XM- 12 Card Pe rform ance Mon itori ng Param eters 15.5.8 DS 3XM- 12 Card Performa nc e Monitoring Parameters Figure 15- 16 shows the signal type s that support near-end and far-end PMs. Figur e 15 -16 Monitor ed Signal T ypes f or the DS3XM ...

  • Cisco Systems 15454-FTF2 - page 556

    15-26 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapte r 15 Perfor mance Mon itor ing 15.5.8 DS3XM-12 Ca rd Perform ance Monitori ng Parame ters Figu re 15-17 PM R ead Points on the D S3X M-12 Card T able 15-11 lists the PM parameters f or the D S3XM-12 cards. 124556 ONS 15454 DS3XM-12 Card LIU Mapper Unit BTC ASIC XC Card(s) OC-N DS1 S ...

  • Cisco Systems 15454-FTF2 - page 557

    15-27 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 5 Performance Mo nitoring 15.5.9 DS3/EC1-48 C ard Perform ance Monitor ing Paramet ers 15.5.9 DS3/EC1-48 Card Perfo rma nce Monitoring Parameters Figure 15- 18 shows the signal type s that support near-end and far-end PMs. Figur e 15 -18 Monito r ed Signal T ypes f or the DS 3/ ...

  • Cisco Systems 15454-FTF2 - page 558

    15-28 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapte r 15 Perfor mance Mon itor ing 15.5.9 DS3/E C1-48 Card Performance Monitoring Parame ters Figu re 15-19 PM R ead Points on the D S3/ EC1 -48 Card T able 15-12 lists the PM parameters f or the D S3/EC1-48 ca rds. 124997 ONS 15454 DS3/EC1-48 Card LIU Mapper Unit BTC ASIC XC Card(s) OC ...

  • Cisco Systems 15454-FTF2 - page 559

    15-29 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 5 Performance Mo nitoring 15.6 Perfor mance Moni tori ng for Et herne t Cards Note If the CV -L(NE and FE) f alls in th e range 5 1-61 for DS3,then, th e user mig ht see disc repa nc y in the SES and th e UAS-L values. H owe ver , ES-L w ill be in the ne are st acc uracy . For ...

  • Cisco Systems 15454-FTF2 - page 560

    15-30 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapte r 15 Perfor mance Mon itor ing 15.6.1 E-Series Ethernet Car d Performance Monitori ng Parameters etherStatsUnder sizePkts Th e total number of packets rec eiv ed that wer e less than 64 octets long (excluding fra ming bi ts, but includi ng FCS octets) an d were ot herwis e well form ...

  • Cisco Systems 15454-FTF2 - page 561

    15-31 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 5 Performance Mo nitoring 15.6.1 E- Serie s Ethern et Card Perfo rmance Mon itor ing Pa rameters 15.6.1.2 E-Series Ethernet Utilization Window The Utilizatio n windo w sho ws the percentag e of transmit (Tx) and recei ve (Rx) line bandwidth used by the Ethe rnet po rts du ring ...

  • Cisco Systems 15454-FTF2 - page 562

    15-32 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapte r 15 Perfor mance Mon itor ing 15.6.2 G-Series Ethernet Card Per formanc e Moni toring Parame ters 15.6.2 G-S eries Et hern et Card Per formance Mo nitoring Paramete rs CTC provides Et hernet perfo rman ce infor mation, i ncludi ng line -level parameters , port bandwi dth consumpt i ...

  • Cisco Systems 15454-FTF2 - page 563

    15-33 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 5 Performance Mo nitoring 15.6.2 G-Se ries Ethern et Card Pe rfo rmance Mon itori ng Param eters Note D o not use the HDLC erro rs count er to cou nt the num ber of fra mes droppe d beca use of HDLC errors , because e ach fra me can f ragment i nto several smaller f rames dur i ...

  • Cisco Systems 15454-FTF2 - page 564

    15-34 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapte r 15 Perfor mance Mon itor ing 15.6.3 ML-Series E thernet Card P erformance M onitoring Para meters 15.6.2.3 G-Series Ethernet History Window The Ethernet H istory windo w lists p ast Ethernet sta tistics for the pre v ious time inte rv als. Dependin g on the sel ected t ime in terv ...

  • Cisco Systems 15454-FTF2 - page 565

    15-35 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 5 Performance Mo nitoring 15.6 .3 ML-Se ries Ethe rnet Card Pe rform ance Mon itori ng Param eters dot3Stat sAlignmen tError s A cou nt of frames recei ved on a par ticul ar inte rface that are n ot an integ ral number o f octet s in le ngth an d do not pa ss the FC S check . d ...

  • Cisco Systems 15454-FTF2 - page 566

    15-36 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapte r 15 Perfor mance Mon itor ing 15.6.3 ML-Series E thernet Card P erformance M onitoring Para meters 15.6.3.2 ML-Series Card Ether Ports Uti lization Window The Et her Por ts Ut ilizati on wi ndow shows the per centage of T x an d Rx li ne ban dwidt h used by t he Ether net por ts d ...

  • Cisco Systems 15454-FTF2 - page 567

    15-37 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 5 Performance Mo nitoring 15.6 .3 ML-Se ries Ethe rnet Card Pe rform ance Mon itori ng Param eters 15.6.3.3 ML-Series Card Ether Ports History Window The Et hernet Ethe r Por ts History window li sts past Ethe rnet sta tistic s for the p revious time i ntervals. Depending on th ...

  • Cisco Systems 15454-FTF2 - page 568

    15-38 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapte r 15 Perfor mance Mon itor ing 15.6.3 ML-Series E thernet Card P erformance M onitoring Para meters 15.6.3.5 ML-Series RPR Span Window The param eters th at appear in the ML-Ser ies RPR Spa n windo w are the ma ndator y attrib utes of the 802.17 MI B. For more information on pro vis ...

  • Cisco Systems 15454-FTF2 - page 569

    15-39 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 5 Performance Mo nitoring 15.6 .3 ML-Se ries Ethe rnet Card Pe rform ance Mon itori ng Param eters gfpSta tsRxT ype In v alid N umber of re ceive packets dropped due to Clie nt Data Frame UPI error s. rprSpanStatsInUcastClassC Frames Num ber of re ceived (PHY t o MAC) classC un ...

  • Cisco Systems 15454-FTF2 - page 570

    15-40 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapte r 15 Perfor mance Mon itor ing 15.6.3 ML-Series E thernet Card P erformance M onitoring Para meters rprSpanS tatsIn OamOr gFram es Number of recei ved (PH Y to MA C) O AM O r g fram es p rocesse d b y this MA C. rprS panStatsI nT opoAtd Frames Num ber of re ceived (PHY to MAC) T opo ...

  • Cisco Systems 15454-FTF2 - page 571

    15-41 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 5 Performance Mo nitoring 15.6 .3 ML-Se ries Ethe rnet Card Pe rform ance Mon itori ng Param eters rprS panStatsO utCtr lFrames T he num ber of tr ansmit ted (MAC to PHY) cont rol frame s gene rated by this MA C. This does not include control fram es in transit, i.e. a multicas ...

  • Cisco Systems 15454-FTF2 - page 572

    15-42 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapte r 15 Perfor mance Mon itor ing 15.6.3 ML-Series E thernet Card P erformance M onitoring Para meters rprClientStat sInUcastClassA Octets Number of MA C t o client c lassA unic ast octets. rprClientStat sInMcastClassA Frames Number of MA C t o client c lassA multicast and bro adcast f ...

  • Cisco Systems 15454-FTF2 - page 573

    15-43 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 5 Performance Mo nitoring 15.6.4 CE-Se ries Ethe rnet C ard Pe rformanc e Monit oring Paramet ers 15.6.4 C E-Serie s Ethern et Card Performa nce Mon itoring Para meters CTC provides Et hernet perform ance inform ation, including line-level parame ters, por t bandwidt h consum p ...

  • Cisco Systems 15454-FTF2 - page 574

    15-44 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapte r 15 Perfor mance Mon itor ing 15.6.4 CE-Series Etherne t Card Performance Monitoring Pa rameters 15.6.4.1 CE-Series Card Ether Port Statistics Window The Etherne t Ether Po rts Statistics windo w li sts Ethernet parameters at the li ne le v el. The St atistics windo w pro vides b u ...

  • Cisco Systems 15454-FTF2 - page 575

    15-45 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 5 Performance Mo nitoring 15.6.4 CE-Se ries Ethe rnet C ard Pe rformanc e Monit oring Paramet ers dot3StatsSingle Collision Frames 2 A count of successfully transmitted frames on a pa rticular interf ace for which tr ansmission is inhibited by exac tly on co llision. dot3St ats ...

  • Cisco Systems 15454-FTF2 - page 576

    15-46 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapte r 15 Perfor mance Mon itor ing 15.6.4 CE-Series Etherne t Card Performance Monitoring Pa rameters 15.6.4.2 CE-Series Card Ether Ports Utilization Window The Et her Por ts Ut ilizati on wi ndow shows the per centage of T x an d Rx li ne ban dwidt h used by t he Ether net por ts d uri ...

  • Cisco Systems 15454-FTF2 - page 577

    15-47 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 5 Performance Mo nitoring 15.6.4 CE-Se ries Ethe rnet C ard Pe rformanc e Monit oring Paramet ers Note Line util ization numbe rs e xpre ss the a ver age of ingr ess a nd e gres s traf fic as a per centage of ca pacity . 15.6.4.3 CE-Series Card Ether Ports History Window The Et ...

  • Cisco Systems 15454-FTF2 - page 578

    15-48 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapte r 15 Perfor mance Mon itor ing 15.7 Performa nce Monit oring for Opt ical Cards 15.6.4.5 CE-Series Card POS Por ts Utilizati on Window The POS Ports Utilization win dow sho ws the perc entage of Tx an d Rx line ba ndwidth used b y the POS ports du ring co nsecu tiv e time segments. ...

  • Cisco Systems 15454-FTF2 - page 579

    15-49 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 5 Performance Mo nitoring 15.7 Perfor mance Mon itoring f or Optica l Cards Figur e 15 -20 Monitor ed Signal T ypes f or the OC-3 Car ds Note The XX in Figure 1 5-20 represents all PMs listed in T able 15 -23 , T able 15- 24 , and T ab le 15-25 with the giv en prefix and/ or su ...

  • Cisco Systems 15454-FTF2 - page 580

    15-50 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapte r 15 Perfor mance Mon itor ing 15.7 Performa nce Monit oring for Opt ical Cards T able 15-25 lists t he PM param eters fo r OC-12, OC-48, OC- 192, an d OC-19 2-XFP cards. T able 15-23 OC-3 Car d PMs Section (NE ) Line (NE) STS P ath (NE) Line (FE) STS Path (FE) 1 1. The STS Pa th (F ...

  • Cisco Systems 15454-FTF2 - page 581

    15-51 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 5 Performance Mo nitoring 15.8 Performance Monitoring for Optical Multirate Cards Note If the CV -L(NE and FE) falls in a specif ic range, the n, the user mi ght see di screpa nc y in the SES and the U AS-L valu es. Ho we v er , ES-L will b e in t he neare st accurac y . F or a ...

  • Cisco Systems 15454-FTF2 - page 582

    15-52 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapte r 15 Perfor mance Mon itor ing 15.9 Performance Monitori ng for Storag e Access Networking Cards Figu re 15-22 PM R ead Points for t he M RC-12 and t he M RC-2 .5G-4 Cards T able 15-27 lists the PM parameters for MRC-12 and MRC-4 cards. 15.9 Perfo rmance Monitoring for Storage Acc e ...

  • Cisco Systems 15454-FTF2 - page 583

    15-53 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 5 Performance Mo nitoring 15.9.1 FC_MR-4 Statistics Wi ndow CTC provide s FC_MR-4 performance infor mation, including li ne-le vel para meters, port band width consumpt ion, a nd h istorica l stat istics. The FC_MR- 4 card perf ormanc e info rmati on is divided into the Statist ...

  • Cisco Systems 15454-FTF2 - page 584

    15-54 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapte r 15 Perfor mance Mon itor ing 15.9.2 FC_MR-4 U tilizatio n Window 15.9.2 FC_MR-4 Utilization Window The Utilizatio n windo w sho ws the percentage of Tx and Rx line bandwidth used b y the ports during consec uti v e time se gmen ts. The Util ization win do w pro vides an In terv al ...

  • Cisco Systems 15454-FTF2 - page 585

    15-55 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 1 5 Performance Mo nitoring 15.9.3 FC_MR-4 History Window Note Line util ization numbe rs e xpre ss the a ver age of ingr ess a nd e gres s traf fic as a per centage of ca pacity . 15.9.3 FC_MR-4 History W indow The Histo ry window lists past FC_MR-4 st atistics for the previous ...

  • Cisco Systems 15454-FTF2 - page 586

    15-56 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapte r 15 Perfor mance Mon itor ing 15.9. 3 FC_ MR-4 Histor y Wind ow ...

  • Cisco Systems 15454-FTF2 - page 587

    CH A P T E R 16-1 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 16 SNMP This cha pter explains Sim ple Netwo rk Manage ment Proto col (SNMP) as i mplement ed by the Cisco ONS 1545 4. For SNMP setu p infor mat ion, refe r to the Ci sco ONS 15454 P r ocedur e Guid e . Chapter topics include: • 16.1 SN MP Overview , pa ge 16- 1 • 16.2 Ba ...

  • Cisco Systems 15454-FTF2 - page 588

    16-2 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapter 16 SNMP 16.2 Basic SNMP Components Note It i s recom mended t hat t he SNM P Manage r tim eout value be set to 60 secon ds. Un der cert ain co nditions, if this v alue is lo wer than the rec ommended time, the TCC card can reset. Ho weve r , the response time depends on v arious par ...

  • Cisco Systems 15454-FTF2 - page 589

    16-3 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 16 SNMP 16.2 Basic SNMP Compone nts Figur e 16 -2 Examp le of the P r imary SNMP Compon ents An age nt (suc h as SNMP) r esidin g on each m anaged device tra nslates local mana gement infor mation data—such as p erformance infor mation or e v ent and e rror informatio n caught i ...

  • Cisco Systems 15454-FTF2 - page 590

    16-4 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapter 16 SNMP 16.3 SNMP Ext ernal Interf ace Requireme nt 16.3 SNMP Ex ternal Interfac e Requireme nt Since all SNMP requests com e from a third-party applic ation, the only e xternal int erface re quirement is that a third-pa rty SNMP client appl ication shou ld have the ability to uploa ...

  • Cisco Systems 15454-FTF2 - page 591

    16-5 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 16 SNMP 16.6 SNMP Managemen t Information Bases 16.6 SNMP Man agement Information Bases A manage d obje ct, some times ca lled a MIB obj ect, is one o f many spec ific characteri stics of a man aged de vic e. The MIB con sists of hie rarchic ally or ga nized ob ject inst ances (v ...

  • Cisco Systems 15454-FTF2 - page 592

    16-6 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapter 16 SNMP 16.6. 2 P ropr ietar y ONS 154 54 MI Bs 16.6.2 Proprietary ONS 1545 4 MIBs Each ON S 15454 is shippe d wit h a softwar e CD con taining applica ble pro prietar y MIBs . T able 16-3 lists the propri etary MIBs fo r the ONS 15454. Note If you cannot compile the prop rietary MI ...

  • Cisco Systems 15454-FTF2 - page 593

    16-7 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 16 SNMP 16.6.3 Generi c Thresho ld and Per formance M onitori ng MIBs 16.6.3 Generic Threshold and P erformance Mo nitoring MIB s A MIB ca lled CERENT -GENERIC-PM-MI B allo ws net work m anagement sta tions ( NMS) to use a single, generic MIB fo r ac cessing t hreshol d and p erfo ...

  • Cisco Systems 15454-FTF2 - page 594

    16-8 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapter 16 SNMP 16.6.3 Generi c Threshol d and Performan ce Moni toring MIB s synt ax of cerent Gener icPmStat sCur rentInde x is type cere ntLo catio n, def ined in CER ENT -TC.mib . The syntax of cer entGene ricPmSt atsCurr ent MonT ype is type cerentM onitor, def ined in CERE NT -TC.mib ...

  • Cisco Systems 15454-FTF2 - page 595

    16-9 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 16 SNMP 16.7 SNMP Trap Cont ent 16.7 SNMP Trap Conte nt The ONS 15454 uses SNMP tr aps to ge nera te all ala rms and e vents, su ch as rais es and cle ars. Th e tra ps contain the fo llo wing informatio n: • Object IDs that uniqu ely identify eac h ev ent with inform ation about ...

  • Cisco Systems 15454-FTF2 - page 596

    16-10 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapter 16 SNMP 16.7.2 Variable Trap Bindings 16.7.2 Variable Trap Bindings Each SNMP tr ap cont ains v aria ble bi nding s that are used to cr eate the MIB table s. ONS 15454 traps an d variable bindings a re liste d in Ta b l e 1 6 - 8 . For each gr oup (suc h as Gro up A), all traps wit ...

  • Cisco Systems 15454-FTF2 - page 597

    16-11 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 16 SNMP 16.7.2 Variable Trap Bindings B (con t.) (4) cer ent454Al armStat e The alarm severity and servi ce-af fe cting st atus. Severitie s ar e Min or, Major , and Critical . Service- af fecting statuses ar e Service- Af fectin g and Non- Servic e Affecting. (5) snm pT rapAddr ...

  • Cisco Systems 15454-FTF2 - page 598

    16-12 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapter 16 SNMP 16.7.2 Variable Trap Bindings D1 (con t.) (5) alarmRising Threshold When the c urrent sampled v alue is great er than o r equal to t his thr eshol d, and th e value at th e last sampling inter va l was le ss than this threshol d, a single e vent is generate d. A single ev e ...

  • Cisco Systems 15454-FTF2 - page 599

    16-13 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 16 SNMP 16.7.2 Variable Trap Bindings D2 (con t.) (7) cer ent454Al armStat e The alarm severity and servi ce-af fe cting st atus. Severitie s ar e Min or, Major , and Critical . Service- af fecting statuses ar e Service- Af fectin g and Non- Servic e Affecting. (8) snm pT rapAddr ...

  • Cisco Systems 15454-FTF2 - page 600

    16-14 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapter 16 SNMP 16.7.2 Variable Trap Bindings E (con t.) (9) ceren t454AlarmAd ditionalInf o Additional i nformation for the alar m obje ct. I n th e cu rrent vers ion of t he MIB, this o bject contai ns provisioned des cription for ala rms that are e xterna l to the NE. If there is no add ...

  • Cisco Systems 15454-FTF2 - page 601

    16-15 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 16 SNMP 16.7.2 Variable Trap Bindings F (con t.) (10) cerent4 54Thre shol dLocat ion Indi cates w hethe r the event occurr ed at the nea r or far end. (11) cerent4 54Thresh oldPeri od I ndicates the sam pling i nterval peri od. (12) cerent4 54Thre shol dSetV a lue The value of th ...

  • Cisco Systems 15454-FTF2 - page 602

    16-16 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapter 16 SNMP 16.8 SNMP Community Names 16.8 S NMP Community Na mes Communi ty names are us ed t o group SNMP trap d estinations. All O NS 1 5454 tr ap dest inations c an be provisio ned as part of SNM P communitie s in CTC. When co mmunity names are assig ned to t raps, the ONS 15454 tr ...

  • Cisco Systems 15454-FTF2 - page 603

    16-17 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 16 SNMP 16.10.1 64-Bit RMON Monitoring ov er DCC ONS 15454 syste m RMON is based on the IETF-stan dard MIB RFC 2819 and includes the fo llowing fi v e grou ps fro m the standa rd MIB: Ethe rnet Statist ics, Hi story Co ntrol, Etherne t Hist ory , A larm , and Event. Certai n stat ...

  • Cisco Systems 15454-FTF2 - page 604

    16-18 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapter 16 SNMP 16.10.2 HC-RMON- MIB Suppor t 16.10.1.2 Row Creation in cMediaIndependentHistoryCo ntrolTable SNMP ro w creation and de letion for the cMedia IndependentHisto ryControlT able follow s the sam e processe s as for the Me diaInd epen dentT ab le; only the variables differ . In ...

  • Cisco Systems 15454-FTF2 - page 605

    16-19 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 16 SNMP 16.10.4 History Contr ol RMON Group 16.10.3.2 Get Requests and GetNext Requests Get requests an d getNe xt requests for th e etherStat sMulticastPk ts and etherSta tsBroadcastPkts colu mns retur n a va lue of zer o because the v ariables are not sup ported b y ONS 154 54 ...

  • Cisco Systems 15454-FTF2 - page 606

    16-20 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapter 16 SNMP 16.10.5 Ethernet History RMO N Grou p T o create a SetR eque st PDU for the hist oryCon trolT able, the following values are requ ired: • The histor yControl DataSou rce and its de sired value • The histor yCont rolBucketsRe quested an d it desired value • The histor ...

  • Cisco Systems 15454-FTF2 - page 607

    16-21 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 16 SNMP 16.10.6 Alarm RMON Group 16.10.6.1 Alarm Table The N MS uses the alarm T able to deter mine and p rovision network perfo rmance alar mable thresh olds. 16.10.6.2 Row Creation in alarmTable T o cr eate a ro w in the alarmT ab le, all OIDs in the SetReq uest PDU sh ould be ...

  • Cisco Systems 15454-FTF2 - page 608

    16-22 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapter 16 SNMP 16.10.6 A larm RMON Group 16.10.6.3 Get Requests and GetNext Requests These PDUs are not re stri cted. 16.10.6.4 Row Deletion in al armTable T o del ete a ro w from the table, the SetReque st PDU should c ontain an a larmStatu s v alue of 4 (in v alid). A deleted row can be ...

  • Cisco Systems 15454-FTF2 - page 609

    16-23 Cisco ONS 15 454 Referenc e Manual, R8. 5.x 78-18106-01 Chapter 16 SNMP 16.10.7 Event RMON Gro up 16.10. 7 Event R MON Group The Ev ent gr oup contr ols e ve nt gener ation and notif icatio n. It co nsists of two ta bles: the e ventT ab le, which is a read-o nly list of e ven ts to b e generat ed, and th e logT able, which is a writa ble set ...

  • Cisco Systems 15454-FTF2 - page 610

    16-24 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Chapter 16 SNMP 16.10.7 Event RMON G roup ...

  • Cisco Systems 15454-FTF2 - page 611

    A- 1 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 APPENDIX A Hardware Specifications Note Th e terms "Unidire ctiona l Path Switched Ri ng" and " UPSR" may appear in Ci sco liter ature. These t erms do not refer t o using Cisc o ONS 15xxx prod ucts in a unid irecti onal path sw itched ring configuratio n. Rather , thes ...

  • Cisco Systems 15454-FTF2 - page 612

    A- 2 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix A Hardware Specifications A.1.2 Configurations A.1.2 Configurations The ONS 15454 can be configured as follows: • T wo-fiber path protecti on • Path protec ted mesh network ( PPMN) • T wo-fiber bidirec tiona l line switch ring ( BLSR) • Four-f iber BLSR • Add-drop multip ...

  • Cisco Systems 15454-FTF2 - page 613

    A-3 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix A Hardwar e Specific ations A.1.7 A larm Int erfac e • Hardw are fl o w cont rol • TCC2/TC C2P: EIA/ TIA-2 32 DB-9 type con necto r A.1.7 Alar m Interface The ONS 15454 alar m interface ha s the follo wing specif icati ons: • V isual: Critical, M ajor , Minor , Remote • Au ...

  • Cisco Systems 15454-FTF2 - page 614

    A- 4 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix A Hardware Specifications A.1.12 Fa n Tr ay – Nominal: –48 VDC – Input V oltage Ran ge: –4 0.5 to –57.0 VD C • Po wer ter minals: #6 L ug • ANSI shel f fu sing: 100– A fu se pane l (mini mum 30 A f use per shelf) HD shelf fusin g: 100–A fuse panel (mi nimum 30 A f ...

  • Cisco Systems 15454-FTF2 - page 615

    A-5 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix A Hardwar e Specific ations A.2 S FP, XFP, and GBIC Specif icati ons A.2 SFP, XFP, and GBIC Specificati ons Ta b l e A - 2 lists the spec ifications for the av ailable Small Form-factor Plugga bles (SFPs), 10 Gbps Pluggable s (XFPs) and GBIC s. In the table, the following acronyms ...

  • Cisco Systems 15454-FTF2 - page 616

    A- 6 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix A Hardware Specifications A.2 SFP, XFP, and GBIC Specifi cations ONS-SC-GE-SX= GE –9.5 to 0 –17 to 0 2 ONS-SC -GE-LX= GE –9. 5 to –3 –19 to –3 3 ONS-SI -2G-S1 O C-48 SR –10 to –3 –18 to –3 ONS-SI -2G-I1 OC -48 IR 1 –5 to 0 –18 to 0 ONS-SI -2G-L1 OC -48 LR1 ? ...

  • Cisco Systems 15454-FTF2 - page 617

    A-7 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix A Hardwar e Specific ations A.3 Genera l Ca rd Speci ficati ons A.3 General Card Spe cifications This se ction provide s power s pecificat ions an d temp erat ure ranges for a ll O NS 1 5454 ca rds. A.3.1 Power Ta b l e A - 3 provi des power c onsumpti on inf ormat ion f or t he O ...

  • Cisco Systems 15454-FTF2 - page 618

    A- 8 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix A Hardware Specifications A.3.1 Powe r T able A -3 Individual Car d Po w er Requir emen ts Card T ype Card Na me Watt s Ampe res BTU/Hr . Contro l Cards TCC2 19.20 0.4 66.8 TCC2P 27.00 0.56 92.2 XCVT 34.40 0.72 117 .46 XC10G 48 1 163.68 XC-V XC-10G 67 1.4 228.62 AIC-I 4.8 0.1 15.3 ...

  • Cisco Systems 15454-FTF2 - page 619

    A-9 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix A Hardwar e Specific ations A.3.1 Power Optic al Card s OC3 I R 4 19.20 0.40 65.56 OC3 I R 4/STM 1 SH 131 0 19. 20 0.40 65. 56 OC3 I R 4/STM 1SH 1 310-8 26.00 0.4 8 78. 5 OC12 IR 131 0 10.90 0.23 37.22 OC12 LR 131 0 9.2 8 0.2 31.68 OC12 LR 155 0 9.2 8 0.2 31.68 OC12 LR/ST M4 LH 13 ...

  • Cisco Systems 15454-FTF2 - page 620

    A-10 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix A Hardware Specifications A.3.2 Temperature A.3.2 T emper ature Ta b l e A - 4 provides tem perature range s and prod uct name s for ONS 15 454 c ards. Note The I-T emp symbol is displayed on the facep late of an I-T emp complian t card. A card without this symbol is C-T e mp compl ...

  • Cisco Systems 15454-FTF2 - page 621

    A-11 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix A Hardwar e Specific ations A.3.2 Temp era ture Optica l OC3 I R 4/STM 1 SH 131 0 1545 4-OC34I R1310 154 54-OC 34I13-T OC3 I R/STM1 SH 13 10-8 1545 4-OC 3I8-13 10 — OC12 IR/ST M4 SH 1 310 15454-O C121I R1310 15454-OC 121I13 -T OC12 LR/ST M4 LH 1310 15454-OC 121LR1 310 15454- OC ...

  • Cisco Systems 15454-FTF2 - page 622

    A-12 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix A Hardware Specifications A.4 Common Control Card Spe cifications A.4 Co mmon Contro l Card Specificatio ns This sec tion pro vides spec ific ations fo r the TC C2, TCC2P , XCVT , XC10G, XC-VXC- 10G, and AIC-I card s. For compliance informatio n, refer to the Cisco Optica l T ransp ...

  • Cisco Systems 15454-FTF2 - page 623

    A-13 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix A Hardwar e Specific ations A.4.2 TCC2P Card Specif icati ons – Refere nce: Ex tern al BITS , line, in tern al • Supply v oltage monitoring – Both supply v o ltage inputs ar e monitored. – Normal operati on: –40.5 t o –56.7 V – Underv oltage : Major alarm – Ove rv ...

  • Cisco Systems 15454-FTF2 - page 624

    A-14 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix A Hardware Specifications A.4.3 XCVT Card Specifications • Dimensions – Height : 12.65 0 in. ( 321.3 mm) – W idth: 0.716 in . (18.2 mm) – Depth: 9.000 in. ( 228.6 mm) – Dept h with back plan e conn ect or: 9. 250 i n. (235 mm) – W eight not inc luding c lam shell: 1. 5 ...

  • Cisco Systems 15454-FTF2 - page 625

    A-15 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix A Hardwar e Specific ations A.4.5 XC-VXC- 10G Card Specif ications A.4.5 XC-VXC-10G Card Specifications The XC-V XC-1 0G card has th e following spec ifications: • En vironme ntal – Opera ting t emp eratur e: I-T emp (154 54-XC-V XC-1 0G-T): – 40 t o 149 degrees Fahre nheit ...

  • Cisco Systems 15454-FTF2 - page 626

    A-16 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix A Hardware Specifications A.4.7 AEP Specifica tions – Orderwi re part y line – Dual tone mu ltifrequ ency (DT MF) signali ng • User data chann el (UDC) – Bit rate : 64 kb ps, bid irectiona l – ITU-T G. 703 – Input/out put i mpedan ce: 1 20 ohm – T ermin ation: RJ-11 c ...

  • Cisco Systems 15454-FTF2 - page 627

    A-17 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix A Hardwar e Specific ations A.5 Elect rical Ca rd Sp ecifi cations – T ermin ation: 50 -pin AMP cham p connecto r • Alarm o utputs – Num ber of outp uts : 16 – Switch ed b y op to MOS – T rigg ered b y def inable alarm co ndition – Maximum allowed open circu it voltag ...

  • Cisco Systems 15454-FTF2 - page 628

    A-18 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix A Hardware Specifications A.5.2 DS1-14 and D S1N-14 Card Specif ications – Bit ra te: 51.8 4 Mbps +/– 20 pp m – Frame form at: SONET – Line co de: B3ZS – T ermin ation: Unb alanced coaxial ca ble – Input impe dance: 75 ohms +/–5 perc ent – Cable loss: Max 450 fee t ...

  • Cisco Systems 15454-FTF2 - page 629

    A-19 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix A Hardwar e Specific ations A.5.3 DS1/E1-56 Card Specificati ons • Output – Bit rate : 1.544 Mbp s +/– 3 2 ppm – Frame format : Of f, SF (D4), E SF – Line co de: AMI, B8Z S – T erm inati on: W ire -wra p, AM P Ch amp – Input im peda nce: 100 oh ms – Cable loss: Ma ...

  • Cisco Systems 15454-FTF2 - page 630

    A-20 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix A Hardware Specifications A.5.4 DS3/ EC1-48 Card Specifica tions – T ermin ation: Bala nced , twist ed p air , #22/24 A WG – Input impe dance: 100 ohms +/– 5 pe rcent (D S1); 120 ohm s =/–5% (E1) – Cable loss: Ma x 655 feet AB AM # 22/24 A WG (DS1); Complia nt per ITU-T G ...

  • Cisco Systems 15454-FTF2 - page 631

    A-21 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix A Hardwar e Specific ations A.5.5 DS3-12 and DS3N- 12 Card Specif ications – Line co de: B3ZS – T ermin ation: Unb alanced coaxial ca ble – Input impe dance: 75 ohms +/–5 perc ent – Cable loss: Max 450 fee t with 734A or 728 A, Max 79 fe et with RG-179 – AIS: TR-T SY ...

  • Cisco Systems 15454-FTF2 - page 632

    A-22 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix A Hardware Specifications A.5.5 DS3-12 and D S3N-12 Card Specif ications – Frame format : DS-3 AN SI T1 .107-1 988 – Line co de: B3ZS – T ermin ation: Unb alanced coaxial ca ble – Input impe dance: 75 ohms +/–5 perc ent – Cable loss: Max 450 fee t 734A, RG-5 9, 728A /Ma ...

  • Cisco Systems 15454-FTF2 - page 633

    A-23 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix A Hardwar e Specific ations A.5.6 DS3 i-N-12 Ca rd Speci ficati ons A.5.6 DS3i-N-12 Card Specifications The DS 3i-N-1 2 card has the fol lowing specification s: • Input – Bit rat e: 44 .736 Mbps +/ –20 p pm – Frame f ormat: ITU-T G.704, ITU-T G.752 /DS-3 AN SI T1 .107- 19 ...

  • Cisco Systems 15454-FTF2 - page 634

    A-24 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix A Hardware Specifications A.5.7 DS3-12E and DS 3N-12E Card Specifi cations – Dept h with back plan e conn ect or: 9. 250 i n. (235 mm) – W eight not inc luding c lam shell: 1. 9 lb (0.8 kg) A.5.7 DS3-12E and DS3N-12E Card Specifications The DS3- 12E and DS 3N-12E car ds hav e t ...

  • Cisco Systems 15454-FTF2 - page 635

    A-25 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix A Hardwar e Specific ations A.5.8 DS3 XM-12 Ca rd Sp ecificat ions • Power consump tion: 2 6.80 W , 0.56 A, 91. 51 BTU /hr • Dimensions – Height : 12.65 0 in. ( 321.3 mm) – W idth: 0.716 in . (18.2 mm) – Depth: 9.000 in. ( 228.6 mm) – Dept h with back plan e conn ect ...

  • Cisco Systems 15454-FTF2 - page 636

    A-26 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix A Hardware Specifications A.5. 9 DS3X M-6 C ar d Spe cific at ions Note T he I-T emp sym bol is disp layed o n the fac eplate of an I-T emp com pliant car d. A card without this symbol is C-T emp compliant. • Operatin g humi dity : 5 to 95 p ercent, noncond ensin g • Power cons ...

  • Cisco Systems 15454-FTF2 - page 637

    A-27 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix A Hardwar e Specific ations A.5.10 FILLER Card Specif ications – C-T emp (15454-D S3XM-6 ): 0 to 131 degree s Fahrenheit (0 t o +55 degrees Cel sius) – I-T emp (154 54-DS3X M-6-T): –40 to 149 degrees Fa hrenheit (–40 to + 65 degrees Ce lsius) Note T he I-T emp sym bol is ...

  • Cisco Systems 15454-FTF2 - page 638

    A-28 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix A Hardware Specifications A.6.1 OC 3 IR 4/ STM1 SH 1310 Card Speci fica tions A.6.1 OC 3 IR 4/STM1 SH 1310 C ard Specifications The OC3 IR 4/ STM1 SH 1310 car d has the following specificat ions: • Line – Bit rate: 15 5.52 Mb ps – Code: Scrambled non-return to zero (NRZ) – ...

  • Cisco Systems 15454-FTF2 - page 639

    A-29 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix A Hardwar e Specific ations A.6.2 OC3 IR/STM 1SH 1310-8 Card Specif ications A.6.2 OC3 IR/STM1SH 1310-8 Card Specifications The OC3 IR/ STM1S H 1310-8 card ha s the following specification s: • Line – Bit rate: 15 5.52 Mb ps – Code: Scrambled NRZ – Fiber: 1 310-nm single- ...

  • Cisco Systems 15454-FTF2 - page 640

    A-30 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix A Hardware Specifications A.6.3 OC12 IR/STM 4 SH 13 10 Car d Spec ific ations A.6.3 OC12 IR/STM4 SH 1310 Card Specifications The OC12 IR /STM 4 SH 1310 card has th e following specification s: • Line – Bit rate: 62 2.08 Mb ps – Code: Scrambled NRZ – Fiber: 1 310-nm single- ...

  • Cisco Systems 15454-FTF2 - page 641

    A-31 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix A Hardwar e Specific ations A.6.4 OC12 LR/STM4 LH 1310 Card Specif ications A.6.4 OC12 LR/STM4 LH 1310 Card Specifications The OC12 LR /STM 4 LH 1310 card has the foll owing specifications: • Line – Bit rate: 62 2.08 Mb ps – Code: Scrambled NRZ – Fiber: 1 310-nm single- m ...

  • Cisco Systems 15454-FTF2 - page 642

    A-32 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix A Hardware Specifications A.6.5 OC12 LR/ST M4 LH 15 50 C ard Sp ecifi cat ions A.6.5 OC12 LR/STM4 LH 1550 Card Specifications The OC12 LR /STM 4 LH 1550 card has the foll owing specifications: • Line – Bit rate: 62 2.08 Mb ps – Code: Scrambled NRZ – Fiber: 1 550-nm si ngle- ...

  • Cisco Systems 15454-FTF2 - page 643

    A-33 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix A Hardwar e Specific ations A.6.6 OC12 IR/STM4 SH 1310- 4 Specificati ons A.6.6 OC12 IR/STM4 SH 13 10-4 Specifications The OC12 IR /STM4 SH 131 0-4 card ha s the following specifications: • Line – Bit rate: 62 2.08 Mb ps – Code: Scrambled NRZ – Fiber: 1 310-nm single- mod ...

  • Cisco Systems 15454-FTF2 - page 644

    A-34 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix A Hardware Specifications A.6.7 OC48 IR 1 310 Car d Speci fic ation s Note Minimum transmit po wer , minimum recei ve po wer, and link loss budg et might excee d standard specif ication s. A.6.7 OC48 IR 1310 Card Specifications The OC48 IR 1310 card has the fol lowing specificatio ...

  • Cisco Systems 15454-FTF2 - page 645

    A-35 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix A Hardwar e Specific ations A.6.8 OC48 LR 1550 Card Sp ecificati ons A.6.8 OC48 LR 1550 Card Specifications The OC48 LR 1550 car d has the foll owing specifications: • Line – Bit rate: 2.49 Gbps – Code: Scrambled NRZ – Fiber: 1 550-nm single- mode – Loopb ack modes : T ...

  • Cisco Systems 15454-FTF2 - page 646

    A-36 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix A Hardware Specifications A.6.10 OC48 LR/ STM16 LH AS 1 550 Car d Spec ific ation s – Code: Scrambled NRZ – Fiber: 1 310-nm single- mode – Loopb ack modes : T ermi nal and faci lity – Connectors: SC – Complian ce: T e lcordia GR- 253-CORE , ITU- T G.70 7, IT U-T G. 957 ? ...

  • Cisco Systems 15454-FTF2 - page 647

    A-37 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix A Hardwar e Specific ations A.6.11 OC48 ELR/STM 16 EH 100 GHz Card Specificati ons – Connectors: SC – Complian ce: T elcordia G R-253-CO RE, ITU-T G.707, ITU-T G.957 • T ransmitter – Maximum tran smitter output po wer: +3 dBm – Minimum transm itter output p ower: –2 d ...

  • Cisco Systems 15454-FTF2 - page 648

    A-38 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix A Hardware Specifications A.6.12 OC48 ELR 2 00 GHz Card S pecif icati ons • T ransmitter – Maximum transmitter out put power: 0 dBm – Minimum transm itter output p ower: –2 dB m – Cent er w a ve leng th accu rac y: +/ – 0.1 2 nm – T ransmitte r: Electro-absorpti on la ...

  • Cisco Systems 15454-FTF2 - page 649

    A-39 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix A Hardwar e Specific ations A.6.13 OC192 SR/STM64 IO 1310 Card Specificati ons – T ransmitte r: Electro-absorpti on laser – Dispersi on tol erance: 3600 ps/nm • Rece iver – Maximum receiver le vel: –8 dBm – Minimum rece i ver lev el: –2 8 dBm – Receiver: InGaAs AP ...

  • Cisco Systems 15454-FTF2 - page 650

    A-40 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix A Hardware Specifications A.6.14 OC19 2 IR /STM64 S H 15 50 Card Spec ifi catio ns – Maximum receiver le vel: –1 dBm at BER 1 * 10 exp – 12 – Minimum rece i ver lev el: –1 1 dBm a t BER 1 * 10 exp – 1 2 – Rece iv er: P IN diode – Link loss budget: 5 dB m inimum , pl ...

  • Cisco Systems 15454-FTF2 - page 651

    A-41 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix A Hardwar e Specific ations A.6.15 OC192 LR/ST M64 LH 1550 Card Specificati ons – Nominal wa velength: 1550 n m – T ransm itter: Cooled EA (Europ ean accredit ation) modulated laser • Rece iver – Maximum receiver le vel: –1 dBm at BER 1 * 10 exp – 12 – Minimum rece ...

  • Cisco Systems 15454-FTF2 - page 652

    A-42 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix A Hardware Specifications A.6.1 6 OC192 LR/ STM64 LH ITU 1 5xx.xx Car d Specif ication s – Minimum tr ansmitter output powe r: +7 d Bm (15 454-OC19 2LR155 0); +4 d Bm (15 454-OC19 2-LR2 ) – Center wavelength: 1530 to 1565 nm – Nominal wa velength: 1550 n m – Maximum chro ma ...

  • Cisco Systems 15454-FTF2 - page 653

    A-43 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix A Hardwar e Specific ations A.6.16 OC192 LR/STM64 LH ITU 15xx.x x Card Specificati ons In deployment s with a disp ersion co mpensat ion unit (D CU): +/– 100 0 ps/nm, wit h optical signal-to- noise rati on (OSN R) of 1 9 dB (0.5 nm resoluti on band width [ RBW]) In deployment s ...

  • Cisco Systems 15454-FTF2 - page 654

    A-44 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix A Hardware Specifications A.6.17 15 454_M RC-12 Card S peci ficat ions – 1535.82 +/ – 0.040 nm, OC192 LR/ STM64 LH IT U 1 535.82 – 1536.61 +/ – 0.040 nm, OC192 LR/ STM64 LH IT U 1 536.61 – 1538.19 +/ – 0.040 nm, OC192 LR/ STM64 LH IT U 1 538.19 – 1538.98 +/ – 0.040 ...

  • Cisco Systems 15454-FTF2 - page 655

    A-45 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix A Hardwar e Specific ations A.6.18 M RC-2.5 G-4 Card S pecification s – Maximum rece i ver le vel: Depe nds on SFP (see A.2 SFP , XFP , and GBIC Specificati ons, page A-5 ) – Minimum recei ver le v el: Depends on SFP (se e A.2 SFP , X FP , and G BIC Spe cificati ons, page A-5 ...

  • Cisco Systems 15454-FTF2 - page 656

    A-46 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix A Hardware Specifications A.6.18 MRC-2.5G-4 Card Spe cifications – Complian ce: T el cordia G R-253-CO RE • T ransmitter – Maximum transmitter outpu t pow er: Depen ds on SFP (see A.2 SFP , XFP , and GBIC Specif icatio ns, page A-5 ) – Minimum transmitter output po wer: Dep ...

  • Cisco Systems 15454-FTF2 - page 657

    A-47 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix A Hardwar e Specific ations A.6.19 OC192SR1/STM64IO Short R each Card Specif ications A.6.19 OC192SR1/STM 64IO Short Reach Card Specifications Note Th e OC192SR1/ STM6 4IO Short Reac h card is desi gnated as OC1 92-XF P in CTC. The OC192 SR1/STM6 4IO Short Re ach card has the fol ...

  • Cisco Systems 15454-FTF2 - page 658

    A-48 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix A Hardware Specifications A.7 Etherne t Card Spec ifications – Connectors: LC duple x connec tor for the XFPs – Complian ce: T el cordia G R-253-CO RE • T ransmitter – Maximum transmitter outpu t pow er: Depen ds on SFP (see A.2 SFP , XFP , and GBIC Specif icatio ns, page A ...

  • Cisco Systems 15454-FTF2 - page 659

    A-49 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix A Hardwar e Specific ations A.7.2 E100T-G Card Specif ications – Height : 12.65 0 in. ( 321.3 mm) – W idth: 0.716 in . (18.2 mm) – Depth: 9.000 in. ( 228.6 mm) – Card weigh t: 2.3 lb (1.0 kg) A.7.2 E100T-G Card Spec ifications The E100 T -G card ha s the follo wing specif ...

  • Cisco Systems 15454-FTF2 - page 660

    A-50 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix A Hardware Specifications A.7.5 CE-1000-4 Card Spe cifications C-T emp (1545 4-E10 00-2-G) : 32 t o 131 degrees Fahre nheit (0 to +55 degrees Ce lsius) – Operatin g humi dity : 5 to 95 p ercent, noncond ensi ng – Power consump tion: 5 3.50 W , 1.11 A, 182.6 7 BTU/ hr • Dimens ...

  • Cisco Systems 15454-FTF2 - page 661

    A-51 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix A Hardwar e Specific ations A.7. 7 CE-MR- 10 Ca rd Sp ecifi cati ons A.7.7 CE-MR-10 Card Specificatio ns The CE- MR-10 card has the follo wing specif ications: • En vironme ntal – Opera ting t emp eratur e C-T emp (1545 4-CE- MR-10): 32 to 131 d egrees Fahren heit (0 to +50 d ...

  • Cisco Systems 15454-FTF2 - page 662

    A-52 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix A Hardware Specifications A.7.10 ML 1000- 2 Card Spec ific ation s – W idth: 0.716 in . (18.2 mm) – Depth: 9.000 in. ( 228.6 mm) – Dept h with back plan e conn ect or: 9. 250 i n. (235 mm) – W eight not inc luding c lam shell: 2. 3 lb (1.0 kg) A.7.10 ML1000-2 Card Specifica ...

  • Cisco Systems 15454-FTF2 - page 663

    A-53 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix A Hardwar e Specific ations A.8 Stora ge Access Networ king Ca rd Speci ficati ons – Operatin g humi dity : 5 to 95 p ercent, noncond ensi ng – Power consumptio n: 100 W • Dimensions – Height : 12.65 0 in. ( 321.3 mm) – W idth: 0.716 in . (18.2 mm) – Depth: 9.000 in. ...

  • Cisco Systems 15454-FTF2 - page 664

    A-54 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix A Hardware Specifications A.8 Storage A ccess Ne tworkin g Card Specifi cations – Card weigh t: 2.59 lb (1.17 kg) ...

  • Cisco Systems 15454-FTF2 - page 665

    B-1 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 APPENDIX B Administrative and Service States This a ppend ix descri bes ad minist rative and s ervice s tates for Cisco O NS 1 5454 c ards, p orts, a nd cross-connect s. For circu it state information, refer to Chapter 11, “Ci rcuits and Tunnels. ” Entity sta tes in Softwa re Relea se 5 ...

  • Cisco Systems 15454-FTF2 - page 666

    B-2 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendi x B Administr ative an d Servic e State s B.2 Admini strativ e States B.2 Admin istrative States Admini stra ti ve s tates are used to ma nage service states. Admini strati ve stat es consist o f a PST and an SST . Ta b l e B - 3 lists the administrati ve states supported by the ONS ...

  • Cisco Systems 15454-FTF2 - page 667

    B-3 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix B Adminis trative and Service States B.3 Servi ce State Transiti ons B.3 Service Stat e Transitions This sect ion descri bes the t ransiti on from one s ervice stat e to the next for ca rds, por ts, and cross-connect s. A service state tran sition is based on the action perfo rmed ...

  • Cisco Systems 15454-FTF2 - page 668

    B-4 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendi x B Administr ative an d Servic e State s B.3.1 Card Serv ice State Trans itions OOS-A U,AINS & SWDL Restart comp leted. IS-NR Remo v e the card. OOS-A U,AINS & UEQ OOS-A U,AINS & UEQ Insert a v alid ca rd. OOS-A U,AINS & SWDL Insert an inv alid c ard. OO S-A U,AINS & ...

  • Cisco Systems 15454-FTF2 - page 669

    B-5 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix B Adminis trative and Service States B.3. 2 Por t an d Cros s-Co nne ct S ervic e Sta te Tr ans ition s B.3.2 Port and Cross- Connect Service State Transitions Ta b l e B - 5 lists the port and cross-connect servic e state transition s. Port states do not impact cross-c onnect sta ...

  • Cisco Systems 15454-FTF2 - page 670

    B-6 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendi x B Administr ative an d Servic e State s B.3.2 Port and Cross-Conne ct Service St ate Trans itions T o change this b ehavior so that you canno t put a port in O OS-MA,D SBLD if any of these cond itions exi st, set the NODE. gener al.Fo rceT oOosDsbldSt ateChang e defa ult se tting t ...

  • Cisco Systems 15454-FTF2 - page 671

    B-7 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix B Adminis trative and Service States B.3. 2 Por t an d Cros s-Co nne ct S ervic e Sta te Tr ans ition s OOS-A U,AINS & FL T Alar m/conditio n is cleared . OOS-A U,AINS Put th e por t or cr oss-c onnect in the IS administrati ve state. OOS- A U,FL T Put th e por t or cr oss-c o ...

  • Cisco Systems 15454-FTF2 - page 672

    B-8 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendi x B Administr ative an d Servic e State s B.3.2 Port and Cross-Conne ct Service St ate Trans itions OOS-A U,FL T & OOG Alarm/conditio n is cleared . IS-NR o r OOS-MA,MT • If an In Grou p me mber i s IS-NR o r OOS-A U,AINS, the member tran sitions to IS-NR. • If an In Grou p m ...

  • Cisco Systems 15454-FTF2 - page 673

    B-9 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix B Adminis trative and Service States B.3. 2 Por t an d Cros s-Co nne ct S ervic e Sta te Tr ans ition s OOS-A UMA,FL T & MT & OOG Alar m/cond ition is cl eared. OOS-M A,MT & OOG Put the VCA T cross-connect in the IS administrati ve state. Note VC A T In G roup me mbers ...

  • Cisco Systems 15454-FTF2 - page 674

    B-10 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendi x B Administr ative an d Servic e State s B.3.3 Plugga ble Equipm ent Se rvice St ate Transitio ns B.3.3 Pluggable Equipme nt Service Sta te Transitions The service state tra nsitions for plugg able equi pment are the same as for other equip ment with the excep tions list ed in Ta b ...

  • Cisco Systems 15454-FTF2 - page 675

    B-11 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix B Adminis trative and Service States B.3.3 Plug gable Eq uipment Servi ce State Tra nsiti ons OOS-A U,AINS & UEQ Insert v al id plu ggable e quipmen t. IS- NR Insert pluggable equip ment wi th th e incorre ct rate . OOS- A U,MEA Pluggab le equipm ent doe s not work with the b ...

  • Cisco Systems 15454-FTF2 - page 676

    B-12 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendi x B Administr ative an d Servic e State s B.3.3 Plugga ble Equipm ent Se rvice St ate Transitio ns ...

  • Cisco Systems 15454-FTF2 - page 677

    C-1 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 APPENDIX C Network Element Defaults Note Th e terms "Unidire ctiona l Path Switched Ri ng" and " UPSR" may appear in Ci sco liter ature. These t erms do not refer t o using Cisc o ONS 15xxx prod ucts in a unid irecti onal path sw itched ring configuratio n. Rather , thes ...

  • Cisco Systems 15454-FTF2 - page 678

    C-2 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix C Network E lement Defaults C.2 Card Default Settings Changes that are ma de manually to most nod e-le ve l defau lt settings o v erride the curren t settings, whether defau lt or pr ovisioned. If you cha nge n ode-level default s ettings, eit her by us ing the Defaul ts edito r or ...

  • Cisco Systems 15454-FTF2 - page 679

    C-3 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix C Network Elem ent Defaul ts C.2.2 Thresho ld Defaults Note MRC-12 and MRC-2. 5G-4 l ine configur ation d efaults are de fined on a per OC -N r ate basis. • SONET STS—(O C-N and EC1- 12 cards) SONET STS-lev el configuration sett ings. • Port—(FC_M R-4 cards only ) Port lin ...

  • Cisco Systems 15454-FTF2 - page 680

    C-4 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix C Network E lement Defaults C.2.3 Defaults by Card • Physical L ayer threshol ds—(O C3-8, OC-192, OC- 192XFP , MRC-2.5G -4, and MRC-12 card s) Expressed in percentage s; includes o ptics thresholds. Threshol d defau lts are de fined fo r near end and/or far end , at 15-mi nute a ...

  • Cisco Systems 15454-FTF2 - page 681

    C-5 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix C Network Elem ent Defaul ts C.2.3 Defaults by Card DS1.pm thresho lds.line .farend. 1day .E S 648 (se conds) 0 - 86400 DS1.pm thresho lds.line .nearend .15min. CV 13340 (BPV cou nt) 0 - 13887 00 DS1.p mthr esh olds. lin e.ne aren d.15m in.E S 65 (secon ds) 0 - 900 DS1.p mthr esh ...

  • Cisco Systems 15454-FTF2 - page 682

    C-6 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix C Network E lement Defaults C.2.3 Defaults by Card DS1.pm thresho lds.p ath.nea rend.1da y .ES 648 (second s) 0 - 8 6400 DS1.pm thresho lds.p ath.nea rend.1da y .FC 0 (count) 0 - 8640 DS1.pm thresho lds.p ath.nea rend.1da y .SAS 17 (seconds) 0 - 86400 DS1.pm thresho lds.pat h.nea re ...

  • Cisco Systems 15454-FTF2 - page 683

    C-7 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix C Network Elem ent Defaul ts C.2.3 Defaults by Card C.2.3.2 DS1/E1-56 Card Default Setti ngs Ta b l e C - 2 lists the DS1/E1-56 card defaul t settings. DS1.pm thresho lds.v t.neare nd.15m in.UAS 10 (se conds) 0 - 9 00 DS1.pm thresho lds.v t.neare nd.1day .CV 125 (BIP8 co unt) 0 - ...

  • Cisco Systems 15454-FTF2 - page 684

    C-8 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix C Network E lement Defaults C.2.3 Defaults by Card DS1-E1-56.DS1-POR T .confi g.sonet.AdminSSMIn STU PRS, STU, ST2, ST 3, SMC, ST4, DUS, RES when //./ /.//.//.NOD E.timi ng.gene ral.SSMMessa geSet Genera tion 1; PRS, STU, ST2, TNC, ST3E, ST3, SM C, ST4, DUS, RES when //./ /.//.//.NO ...

  • Cisco Systems 15454-FTF2 - page 685

    C-9 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix C Network Elem ent Defaul ts C.2.3 Defaults by Card DS1-E1 -56.D S1-POR T .pmthres holds.pa th.farend. 15min. ESN E 65 (seco nds) 0 - 900 DS1-E1 -56.D S1-POR T .pmthreshol ds.pa th.farend. 15min. FC 10 (count) 0 - 72 DS1-E1 -56.D S1-POR T .pmthres holds.pa th.farend. 15min. SEF S ...

  • Cisco Systems 15454-FTF2 - page 686

    C-10 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix C Network E lement Defaults C.2.3 Defaults by Card DS1 -E1-56.D S1-PO R T .pmt hreshol ds.pa th.ne arend.1 5min .ES 65 (seco nds) 0 - 900 DS1-E1 -56.D S1-PO R T .pmt hreshol ds.pa th.near end.1 5min .FC 10 (coun t) 0 - 7 2 DS1 -E1-56.D S1-PO R T .pmt hreshol ds.pa th.ne arend.1 5mi ...

  • Cisco Systems 15454-FTF2 - page 687

    C-11 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix C Network Elem ent Defaul ts C.2.3 Defaults by Card DS1-E1 -56.D S1-POR T .pmthres holds.vt .farend.1d ay . ES 100 (second s) 0 - 8 6400 DS1-E1 -56.D S1-POR T .pmthreshol ds.vt. farend.1d ay .FC 40 (count) 0 - 6912 DS1-E1 -56.D S1-PO R T .pmt hreshol ds.vt. farend.1d ay . SES 7 ( ...

  • Cisco Systems 15454-FTF2 - page 688

    C-12 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix C Network E lement Defaults C.2.3 Defaults by Card DS1-E 1-56. E1-PO R T .conf ig.Sync MsgIn F ALSE F ALSE , TR UE DS1-E1- 56.E1-PO R T .co nf ig.T reatLOF AsDefect TR UE F ALSE, TR UE DS1-E1 -56.E 1-POR T .pmthresh olds.l ine.ne arend. 15min.C V 9 (BPV c ount) 0 - 1 388700 DS1 -E1 ...

  • Cisco Systems 15454-FTF2 - page 689

    C-13 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix C Network Elem ent Defaul ts C.2.3 Defaults by Card C.2.3.3 DS-3 Card Default Settings Ta b l e C - 3 lists the DS-3 card default settin gs. DS1-E1 -56.E 1-POR T .pmthresh olds.st s.nea rend.1d ay .FC 40 (coun t) 0 - 6 912 DS1 -E1-5 6.E1-P OR T .p mthresh olds.s ts.nea rend .1day ...

  • Cisco Systems 15454-FTF2 - page 690

    C-14 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix C Network E lement Defaults C.2.3 Defaults by Card C.2.3.4 DS3/EC1-48 Card Default Settings Ta b l e C - 4 lists the DS3/EC1-48 card default sett ings. DS3.pm thresho lds.li ne.neare nd.1 day .CV 3865 (BPV coun t) 0 - 3 715200 DS3.pm thresho lds.li ne.neare nd.1day .ES 250 (se cond ...

  • Cisco Systems 15454-FTF2 - page 691

    C-15 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix C Network Elem ent Defaul ts C.2.3 Defaults by Card DS3-EC 1-48.DS3 -POR T . config.LineT ype UNFRAME D UNFRAMED, M13, C BIT , AU T O P R OV I S I O N F M T DS3 -EC1-4 8.DS3-PO R T .c onfig.SDBER 1.00E-07 1E-5, 1E -6, 1E-7, 1 E-8, 1E-9 DS3-EC1-48.DS3-POR T .conf ig.SendAISOnFacil ...

  • Cisco Systems 15454-FTF2 - page 692

    C-16 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix C Network E lement Defaults C.2.3 Defaults by Card DS3-EC 1-48. DS3-POR T .pmthresho lds.line .nearend .1day .CV 3865 ( BPV count) 0 - 37152 00 DS3-EC 1-48. DS3-POR T .pmthresho lds.li ne.nea rend.1d ay .ES 250 (seconds) 0 - 86400 DS3-EC 1-48. DS3-POR T .pmthresho lds.li ne.neare n ...

  • Cisco Systems 15454-FTF2 - page 693

    C-17 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix C Network Elem ent Defaul ts C.2.3 Defaults by Card DS3-E C1- 48.D S3-PO R T .pmt hre shol ds. sts.n eare nd. 15mi n.U AS 10 (secon ds) 0 - 900 DS3-EC 1-48. DS3-POR T .pmthresho lds.sts. nearend.1 day .CV 125 (B 3 count) 0 - 20736 0000 DS3-EC 1-48. DS3-POR T .pmthresho lds.sts. n ...

  • Cisco Systems 15454-FTF2 - page 694

    C-18 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix C Network E lement Defaults C.2.3 Defaults by Card DS3-EC 1-48. EC1-PO R T .pm thresho lds.line .neare nd.1d ay .CV 13120 (B2 count) 0 - 13219 200 DS3-EC 1-48. EC1-PO R T .pm thresho lds.li ne.neare nd.1d ay .ES 864 (seconds) 0 - 86400 DS3-EC 1-48. EC1-PO R T .pm thresho lds.line . ...

  • Cisco Systems 15454-FTF2 - page 695

    C-19 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix C Network Elem ent Defaul ts C.2.3 Defaults by Card C.2.3.5 DS3E Card Default Settings Ta b l e C - 5 lists the DS3E card default settings. DS3-EC 1-48. EC1-POR T .pmthresho lds.sts1. nearend. 15min.N PJC-PDET 60 (coun t) 0 - 7 200000 DS3-EC 1-48. EC1-POR T .pmthresho lds.sts1. n ...

  • Cisco Systems 15454-FTF2 - page 696

    C-20 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix C Network E lement Defaults C.2.3 Defaults by Card DS3 E.config.SDBE R 1.00E-0 7 1E-5, 1E -6, 1E-7, 1 E-8, 1E-9 DS3E.c onf i g.Se ndAIS OnF acil ity Loopb ack TR UE TR UE, F AL SE DS3E.c onf i g.Se ndAIS OnT erminalL oopb ack F ALS E F ALSE DS3E. config.SFBER 1.0 0E-04 1E-3, 1E-4 , ...

  • Cisco Systems 15454-FTF2 - page 697

    C-21 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix C Network Elem ent Defaul ts C.2.3 Defaults by Card C.2.3.6 DS3I Card Default Settings Ta b l e C - 6 lists the DS3I card default settin gs. DS3 E.pmthre sholds. pbitpat h.near end. 15min.SA S 2 (s econds) 0 - 9 00 DS3 E.pmthre sholds. pbitpat h.near end. 15min.SE S 4 (sec onds) ...

  • Cisco Systems 15454-FTF2 - page 698

    C-22 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix C Network E lement Defaults C.2.3 Defaults by Card T able C-6 DS3I Card Def ault Settin gs Default Name Default V alue Default Domain DS3I.c onfig.AINSSoakTime 08:00 (hours:m ins) 00:00, 00:15 , 00:30 .. 48:00 DS3I .co nf ig. FeI nhib it Lpbk TR UE TR UE, F AL SE DS3 I.config.Lin e ...

  • Cisco Systems 15454-FTF2 - page 699

    C-23 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix C Network Elem ent Defaul ts C.2.3 Defaults by Card DS3I.p mthresh olds.l ine.nearen d.1day .ES 250 (sec onds) 0 - 8 6400 DS3I.p mthresh olds.l ine.nearen d.1day .LOSS 10 (seco nds) 0 - 86400 DS3I.p mthresh olds.l ine.nearen d.1day .SES 40 (seconds) 0 - 8 6400 DS3I.p mthr esholds ...

  • Cisco Systems 15454-FTF2 - page 700

    C-24 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix C Network E lement Defaults C.2.3 Defaults by Card C.2.3.7 DS3XM-6 Card De fault Settings Ta b l e C - 7 lists the DS3XM-6 card default setti ngs. T able C-7 DS3XM-6 Card Def ault Set tings Default Name Default V alue Default Domain DS3XM .config.AIN SSoakTime 08:00 (hours:mins) 00 ...

  • Cisco Systems 15454-FTF2 - page 701

    C-25 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix C Network Elem ent Defaul ts C.2.3 Defaults by Card DS3XM .pmthres holds.ds1 path.ne arend.15 min.UAS 10 (seconds) 0 - 9 00 DS3XM .pmthr esholds.ds1 path.ne arend. 1day . AISS 10 (seconds) 0 - 8 6400 DS3XM .pmthres holds.ds1 path.ne arend. 1day . ES 648 (sec onds) 0 - 8 6400 DS3X ...

  • Cisco Systems 15454-FTF2 - page 702

    C-26 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix C Network E lement Defaults C.2.3 Defaults by Card C.2.3.8 DS3XM-12 Card Defau lt Settings Ta b l e C - 8 lists the DS3XM-12 card defa ult settings. DS3XM .pmthr esholds. sts.n earend .15min. CV 15 (B3 c ount) 0 - 2 160000 DS3 XM.pmthr esholds. sts.n earend .15mi n.ES 12 (seconds) ...

  • Cisco Systems 15454-FTF2 - page 703

    C-27 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix C Network Elem ent Defaul ts C.2.3 Defaults by Card DS3 XM12.c onfig.SDBER 1.00E- 07 1E- 5, 1E -6, 1E-7, 1 E-8, 1E-9 DS3XM12.con fig .SendAISOnF acility Loopback TR UE TR UE, F ALSE DS3 XM12.c onfig.Sen dAISOnT erminalL oopba ck F AL SE TR UE, F ALSE DS3XM 12.config. SFBER 1.00E- ...

  • Cisco Systems 15454-FTF2 - page 704

    C-28 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix C Network E lement Defaults C.2.3 Defaults by Card DS3XM 12.pmthre sholds.d s1path. farend.15mi n.SEFS 25 (seconds) 0 - 900 DS3XM 12.pmt hreshol ds.ds1path. farend.15 min.SES 10 (seconds) 0 - 900 DS3XM12 .pmthre sholds.d s1path. farend.15min. SESFE 10 (seco nds) 0 - 900 DS3XM 12.pm ...

  • Cisco Systems 15454-FTF2 - page 705

    C-29 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix C Network Elem ent Defaul ts C.2.3 Defaults by Card DS3 XM12.pm thresho lds.line .near end.1 5min.CV 387 (B PV count) 0 - 38700 DS3 XM12.pm thresho lds.line .near end.1 5min .ES 25 (seconds) 0 - 900 DS3XM 12.pmt hresho lds.line. near end.1 5min.L OSS 10 (seco nds) 0 - 9 00 DS3 XM ...

  • Cisco Systems 15454-FTF2 - page 706

    C-30 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix C Network E lement Defaults C.2.3 Defaults by Card C.2.3.9 EC1-12 Card Default Settings Ta b l e C - 9 lists the EC1-12 card default sett ings. DS3XM 12.pmt hresholds.s ts.nea rend.1da y .ES 100 (se conds) 0 - 86400 DS3XM 12.pmt hresholds.s ts.nea rend.1da y .FC 10 (c ount) 0 - 691 ...

  • Cisco Systems 15454-FTF2 - page 707

    C-31 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix C Network Elem ent Defaul ts C.2.3 Defaults by Card EC1.pm thresho lds.li ne.farend. 15min. ES 87 (seconds) 0 - 900 EC1.pm thresho lds.li ne.fare nd.15mi n.FC 10 (coun t) 0 - 72 EC1 .pmthresho lds.l ine.fare nd.15m in.SES 1 ( secon ds) 0 - 9 00 EC1 .pmthresho lds.l ine.fare nd.15 ...

  • Cisco Systems 15454-FTF2 - page 708

    C-32 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix C Network E lement Defaults C.2.3 Defaults by Card C.2.3.10 FC_MR-4 Card Default Settings T a ble C -10 lists the FC_MR-4 card default settings. EC1.pm thresho lds.sts 1.faren d.1day .U AS 10 (seco nds) 0 - 86400 EC1.pm thresho lds.sts1 .nearend. 15min. CV 15 (B3 c ount) 0 - 21600 ...

  • Cisco Systems 15454-FTF2 - page 709

    C-33 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix C Network Elem ent Defaul ts C.2.3 Defaults by Card C.2.3.11 Ethernet Card De fault Settings T a ble C -11 lists the G1000 (G1 K-4), ML10 00, ML1 00T , ML-1 00X-8, ML-M R-10, C E-100 0-4, CE-1 00T -8, an d CE- MR-10 card de fau lt se tti ngs. T able C-1 0 FC_MR-4 Car d Def ault S ...

  • Cisco Systems 15454-FTF2 - page 710

    C-34 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix C Network E lement Defaults C.2.3 Defaults by Card T able C-1 1 Eth er net Car d Def ault Settings Default Name Default V alue Default Domain CE-100 0-4.c onfig.AINSSoakTime 08:00 (hours:mi ns) 00:00 , 00:15, 00: 30 .. 48:00 CE-100 0-4.config.S tate OOS, DSBLD IS, O OS,DSBL D, OOS, ...

  • Cisco Systems 15454-FTF2 - page 711

    C-35 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix C Network Elem ent Defaul ts C.2.3 Defaults by Card C.2.3.12 OC-3 Card Default Set tings T a ble C -12 lists the OC-3 (OC3 IR 4/STM1 SH 1310) card default settings. T able C-12 OC-3 Card Def ault Setting s Default Name Default V alue Default Domain OC3.c onfig.line.A INSSoakTime ...

  • Cisco Systems 15454-FTF2 - page 712

    C-36 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix C Network E lement Defaults C.2.3 Defaults by Card OC3.p mthresh olds.lin e.farend .1day . U AS 10 (seconds) 0 - 86400 OC3.p mthr esholds.lin e.ne aren d.15m in.CV 1312 ( B2 co unt) 0 - 13770 0 OC3.p mthresh olds.lin e.ne aren d.15m in.ES 87 (se conds) 0 - 900 OC3.p mthresh olds.li ...

  • Cisco Systems 15454-FTF2 - page 713

    C-37 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix C Network Elem ent Defaul ts C.2.3 Defaults by Card OC3.p mthreshol ds.sts1.n earend .1day . ES 100 (second s) 0 - 8 6400 OC3.p mthresh olds.sts 1.neare nd.1day .FC 10 (coun t) 0 - 6912 OC3.p mthreshol ds.sts1.n earend .1day . NPJC-PDE T 5760 (count ) 0 - 69120 0000 OC3.p mthresh ...

  • Cisco Systems 15454-FTF2 - page 714

    C-38 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix C Network E lement Defaults C.2.3 Defaults by Card C.2.3.13 OC3-8 Card Def ault Settings T a ble C -13 lists the e ight-port OC3-8 (OC3 IR/STM1 SH 1 310-8) card default set tings. T able C-13 OC3-8 Card Def ault Settin gs Default Name Default V alue Default Domain OC3-8. config.lin ...

  • Cisco Systems 15454-FTF2 - page 715

    C-39 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix C Network Elem ent Defaul ts C.2.3 Defaults by Card OC3-8. physicalth resholds .alar m.OPR-H IGH 200 (%) OPR-LOW , O PR-LOW + 1, OPR -LO W + 2 .. 255 OC3-8. physica lthresholds .alar m.OPR-LOW 50 (%) -1, 0, 1 .. OPR-HIGH OC3-8. physicalth resholds .alar m.OPT -HIGH 120 (%) OPT -L ...

  • Cisco Systems 15454-FTF2 - page 716

    C-40 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix C Network E lement Defaults C.2.3 Defaults by Card OC3-8. pmthresho lds.line .nearend .15min. PSD 300 (second s) 0 - 9 00 OC3-8. pmthre sholds .line.n earend .15min. SES 1 ( secon ds) 0 - 9 00 OC3-8. pmthre shold s.line.n earend .15mi n.U AS 3 ( secon ds) 0 - 900 OC3-8. pmthre shol ...

  • Cisco Systems 15454-FTF2 - page 717

    C-41 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix C Network Elem ent Defaul ts C.2.3 Defaults by Card C.2.3.14 OC-12 Card Def ault Settings T a ble C -14 lists the OC-12 (OC1 2 IR/STM 4 SH 1310, OC12 LR/STM 4 LH 131 0, and OC12 LR/ STM4 LH 1 550) ca rd de f ault set ti ngs. OC3-8. pmthresho lds.sts1 .neare nd.1day .PJCS-PDET 960 ...

  • Cisco Systems 15454-FTF2 - page 718

    C-42 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix C Network E lement Defaults C.2.3 Defaults by Card T able C-14 OC-12 Card Def ault Settin gs Default Name Default V alue Default Domain OC12.c onf i g.l ine. AINS SoakT ime 08:0 0 (hours:m ins) 00:00, 00:15 , 00:30 .. 48:00 OC12.c onf i g.l ine. PJSt sMon# 0 (STS #) 0 - 12 OC12. co ...

  • Cisco Systems 15454-FTF2 - page 719

    C-43 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix C Network Elem ent Defaul ts C.2.3 Defaults by Card OC12. pmthre sholds.l ine.faren d.1da y .U AS 10 (seco nds) 0 - 8 6400 OC12. pmthre sholds.l ine.nea rend.15m in.C V 5315 (B2 count ) 0 - 55260 0 OC12. pmthre sholds.li ne.neare nd.15m in.ES 87 (seconds) 0 - 90 0 OC12. pmthre sh ...

  • Cisco Systems 15454-FTF2 - page 720

    C-44 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix C Network E lement Defaults C.2.3 Defaults by Card OC12. pmthre sholds.st s1.near end.1 5min.PPJC- PDET 60 (coun t) 0 - 72000 00 OC12. pmthre sholds.st s1.near end.1 5min.PPJC- PGEN 60 (count) 0 - 72000 00 OC12. pmthre sholds. sts1.ne aren d.15m in.SES 3 (sec onds) 0 - 900 OC12. pm ...

  • Cisco Systems 15454-FTF2 - page 721

    C-45 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix C Network Elem ent Defaul ts C.2.3 Defaults by Card C.2.3.15 OC12-4 Card Default Setting s T a ble C -15 lists the four-po rt OC12-4 (OC12 IR/STM4 SH 1310-4) card default setti ngs. OC12. pmthres holds.sts12c .nearen d.1day .PPJC-PDET 5760 (co unt) 0 - 69120 0000 OC12. pmthres ho ...

  • Cisco Systems 15454-FTF2 - page 722

    C-46 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix C Network E lement Defaults C.2.3 Defaults by Card OC12-4 .con fig.line.SD BER 1.0 0E-07 1 E-5, 1E -6, 1E-7, 1 E-8, 1E-9 OC12-4 .con fig.line.sdh.Adm inSSMIn STU G811, STU, G812T , G8 12L, SETS , DUS OC12-4.conf ig.line.sdh.Send<FF>D oNotUse F ALSE F ALSE when SendDoN otUse T ...

  • Cisco Systems 15454-FTF2 - page 723

    C-47 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix C Network Elem ent Defaul ts C.2.3 Defaults by Card OC12- 4.pm thre shol ds.l ine .nea rend .15mi n. ES 87 (sec onds ) 0 - 900 OC12-4 .pmt hresho lds.lin e.nearen d.15m in.FC 10 (count) 0 - 7 2 OC12- 4.pm thre sho lds. line .nea rend .15 min. PSC 1 (count ) 0 - 600 OC12- 4.pm thr ...

  • Cisco Systems 15454-FTF2 - page 724

    C-48 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix C Network E lement Defaults C.2.3 Defaults by Card OC12-4 .pmt hresh olds.sts 1.neare nd.15 min.UAS 10 (seconds) 0 - 900 OC12-4 .pmt hresho lds.sts1.n eare nd.1d ay .CV 125 (B3 cou nt) 0 - 20736 0000 OC12-4 .pmt hreshol ds.sts1.n eare nd.1day .ES 100 (seconds) 0 - 86400 OC12-4 .pmt ...

  • Cisco Systems 15454-FTF2 - page 725

    C-49 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix C Network Elem ent Defaul ts C.2.3 Defaults by Card C.2.3.16 OC-48 Card Def ault Settings T a ble C -16 lists the OC-48 (OC48 IR 131 0, OC 48 LR 1 550, OC48 IR/ST M16 SH AS 13 10, OC4 8 LR/STM 16 LH AS 155 0, OC48 ELR /STM16 EH 100 GHz, and O C48 ELR 20 0 GHz) card default settin ...

  • Cisco Systems 15454-FTF2 - page 726

    C-50 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix C Network E lement Defaults C.2.3 Defaults by Card OC48. config.line .AlsRe coveryPulseDura tion 2.0 (sec onds) 2.0, 2.1 , 2.2 .. 100.0 when AlsMod e Disabled , Auto Rest art, Manual Restart ; 80. 0, 80 .1, 8 0.2 . . 100 .0 whe n AlsMode Manual Restart for T est OC48. config.line.A ...

  • Cisco Systems 15454-FTF2 - page 727

    C-51 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix C Network Elem ent Defaul ts C.2.3 Defaults by Card OC48. pmthre sholds.li ne.faren d.1day .ES 864 (sec onds) 0 - 86400 OC48. pmthre sholds.li ne.faren d.1day .FC 40 (count) 0 - 6 912 OC48. pmthre sholds.l ine.faren d.1da y .SES 4 ( secon ds) 0 - 86400 OC48. pmthre sholds.l ine.f ...

  • Cisco Systems 15454-FTF2 - page 728

    C-52 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix C Network E lement Defaults C.2.3 Defaults by Card OC48. pmthres holds.secti on.nea rend.1day .SEFS 5000 ( secon ds) 0 - 86400 OC48. pmthre sholds.se ction.ne arend.1da y .SES 5000 ( secon ds) 0 - 86400 OC48. pmthre sholds.st s1.near end.1 5min .CV 15 (B3 coun t) 0 - 2 160000 OC48. ...

  • Cisco Systems 15454-FTF2 - page 729

    C-53 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix C Network Elem ent Defaul ts C.2.3 Defaults by Card OC48. pmthr esholds. sts12c- 48c.n earend .15mi n.SES 3 (s econds) 0 - 900 OC48. pmthre sholds.s ts12c- 48c.nea rend .15min. U AS 10 (seco nds) 0 - 9 00 OC48. pmthre sholds.s ts12c- 48c.nea rend.1d ay . CV 750 (B3 co unt) 0 - 20 ...

  • Cisco Systems 15454-FTF2 - page 730

    C-54 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix C Network E lement Defaults C.2.3 Defaults by Card C.2.3.17 OC-192 Card Default Setting s T a ble C -17 lists the OC-1 92 (O C192 SR/ST M64 IO 1 310, O C192 LR/STM6 4 LH IT U 15x x.xx, O C192 IR/STM6 4 SH 155 0, and OC192 LR/STM 64 L H 1550) card default se ttings. OC48. pmthr esho ...

  • Cisco Systems 15454-FTF2 - page 731

    C-55 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix C Network Elem ent Defaul ts C.2.3 Defaults by Card OC192.c onfig.line.sonet.Adm inSSMIn ST U PRS, ST U, ST2, ST3, SM C, ST4, DUS, RES when //. //. //. //. NO DE. tim in g.g ener al. SS M MessageSet Generati on 1; PRS, STU, ST2, T NC, ST3E, ST3, SMC, ST4, DUS, RES when //. //. // ...

  • Cisco Systems 15454-FTF2 - page 732

    C-56 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix C Network E lement Defaults C.2.3 Defaults by Card OC192. physica lthresholds. warning .1day . OPR-L O W 50 (%) -1, 0, 1 .. OPR-HIGH OC192. physicalth resholds. warning.1 day . OPT -HIGH 120 (%) OPT -LO W , OPT -LOW + 1, OPT -LOW + 2 .. 255 OC192. physica lthreshol ds.warning .1day ...

  • Cisco Systems 15454-FTF2 - page 733

    C-57 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix C Network Elem ent Defaul ts C.2.3 Defaults by Card OC192. pmthre sholds.li ne.neare nd.1day .PSD-R 600 (se conds) 0 - 8 6400 OC192. pmthre sholds.li ne.neare nd.1day .PSD-S 600 (second s) 0 - 86400 OC192. pmthre sholds.li ne.neare nd.1day .PSD-W 600 (sec onds) 0 - 86400 OC192. p ...

  • Cisco Systems 15454-FTF2 - page 734

    C-58 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix C Network E lement Defaults C.2.3 Defaults by Card OC192. pmthre sholds.st s1.nea rend.1da y .SES 7 (seconds) 0 - 86400 OC192. pmthre sholds.st s1.nea rend.1day .U AS 10 (seconds) 0 - 8 6400 OC192. pmthre sholds .sts12c- 192c. neare nd.15mi n.CV 75 (B3 coun t) 0 - 2 160000 OC192. p ...

  • Cisco Systems 15454-FTF2 - page 735

    C-59 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix C Network Elem ent Defaul ts C.2.3 Defaults by Card C.2.3.18 OC192-XFP Default Settings T a ble C -18 lists the OC192-XFP def ault settings. OC192. pmthre sholds .sts3c- 9c.nea rend.15m in.SES 3 ( secon ds) 0 - 9 00 OC192. pmthre sholds .sts3c- 9c.nea rend.15m in.UAS 10 (seconds) ...

  • Cisco Systems 15454-FTF2 - page 736

    C-60 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix C Network E lement Defaults C.2.3 Defaults by Card OC192- XFP . config.line .sdh.Sync MsgIn TR UE F ALSE, T R UE OC192-XFP .config.line.SendAISOnFacilityLoopback TR UE TR UE, F AL SE OC192- XFP . config.line .Send AISOnT er minal Loopbac k TRUE TRUE, F ALSE OC192- XFP . config.lin ...

  • Cisco Systems 15454-FTF2 - page 737

    C-61 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix C Network Elem ent Defaul ts C.2.3 Defaults by Card OC192- XFP . physicalt hreshol ds.warning .1day .LBC-HIGH 200 (%) LBC -LOW , LBC-L OW + 1, LBC- LO W + 2 .. 255 OC192- XFP . physicalt hres holds.warni ng.1d ay .LB C-LOW 20 (%) 0, 1, 2 .. LBC-HIGH OC192- XFP . physicalt hreshol ...

  • Cisco Systems 15454-FTF2 - page 738

    C-62 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix C Network E lement Defaults C.2.3 Defaults by Card OC192- XFP . pmthre sholds .line.n earend.1d ay . FC 40 (coun t) 0 - 6912 OC192- XFP . pmthre sholds.li ne.neare nd.1d ay .PSC 5 ( count) 0 - 5 7600 OC192- XFP . pmthre sholds.l ine.nea rend.1d ay .PSC-R 5 (co unt) 0 - 5 7600 OC192 ...

  • Cisco Systems 15454-FTF2 - page 739

    C-63 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix C Network Elem ent Defaul ts C.2.3 Defaults by Card OC192- XFP .pm threshol ds.sts1. neare nd.15mi n.PJCS-PDET 100 (second s) 0 - 9 00 OC192- XFP .pm threshol ds.sts1. neare nd.15mi n.PJCS-PGEN 100 (sec onds) 0 - 900 OC192- XFP . pmthreshol ds.sts 1.near end.15m in.PPJC-PD ET 60 ...

  • Cisco Systems 15454-FTF2 - page 740

    C-64 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix C Network E lement Defaults C.2.3 Defaults by Card OC192- XFP . pmthre sholds.st s12c- 192c.ne aren d.15min .PJCS-PGEN 100 (second s) 0 - 9 00 OC192- XFP . pmthre sholds .sts12c- 192c. nearen d.15m in.PPJC-PD ET 60 (coun t) 0 - 7200000 OC192- XFP . pmthre sholds .sts12c- 192c. near ...

  • Cisco Systems 15454-FTF2 - page 741

    C-65 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix C Network Elem ent Defaul ts C.2.3 Defaults by Card C.2.3.19 MRC-12 Card Default Se ttings T a ble C -19 lists the MRC-12 card default setting s. OC192- XFP . pmthre sholds.st s3c-9c. near end.15m in.PPJC-PG EN 60 (count) 0 - 7 200000 OC192- XFP . pmthre sholds .sts3c-9 c.near en ...

  • Cisco Systems 15454-FTF2 - page 742

    C-66 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix C Network E lement Defaults C.2.3 Defaults by Card MRC-12 .OC12-PO R T .c onfig.line.sdh. Send<FF>Do NotUse F ALSE F ALSE w hen SendDoNotUse TR UE; F ALS E, TR UE when SendDoNotUse F ALSE MRC-12 .OC12 -POR T .config.line.sdh.Se ndDoNotU se F ALSE F AL SE, TRUE MRC-12 .OC12 -P ...

  • Cisco Systems 15454-FTF2 - page 743

    C-67 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix C Network Elem ent Defaul ts C.2.3 Defaults by Card MRC-12 .OC12 -POR T .physicalthreshol ds.warnin g.1da y .OPR-H IGH 200 (%) OPR -LO W , OPR-LOW + 1, OPR-LOW + 2 .. 255 MRC-12 .OC12 -POR T .physicalthre sholds.warni ng.1da y .OP R-LOW 50 (%) -1, 0, 1 .. OPR-HIGH MRC-12 .OC12 -P ...

  • Cisco Systems 15454-FTF2 - page 744

    C-68 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix C Network E lement Defaults C.2.3 Defaults by Card MRC-12 .OC12 -POR T .pmthreshold s.sectio n.nearend .15min. CV 1000 0 (B1 count) 0 - 5535 00 MRC-12 .OC12 -POR T .pm thresho lds.sec tion.n earend.1 5min.E S 500 (second s) 0 - 900 MRC-12 .OC12-PO R T .pm thresho lds.sec tion.neare ...

  • Cisco Systems 15454-FTF2 - page 745

    C-69 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix C Network Elem ent Defaul ts C.2.3 Defaults by Card MRC-12 .OC12 -POR T .pm thresho lds.sts1 .neare nd.1day .ES 100 (sec onds) 0 - 8 6400 MRC-12 .OC12 -POR T .pmthreshold s.sts1.ne arend.1d ay . FC 40 (count) 0 - 6912 MRC-12 .OC12 -POR T .pmthreshold s.sts1.ne arend.1d ay . NPJC- ...

  • Cisco Systems 15454-FTF2 - page 746

    C-70 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix C Network E lement Defaults C.2.3 Defaults by Card MRC-12 .OC12 -POR T .pm thresho lds.sts1 2c.nea rend.1da y .CV 750 (B3 count) 0 - 2073 60000 MRC-12 .OC12-PO R T .pm thresho lds.sts1 2c.neare nd.1day .ES 600 (se conds) 0 - 86400 MRC-12 .OC12 -POR T .pm thresho lds.sts1 2c.nea ren ...

  • Cisco Systems 15454-FTF2 - page 747

    C-71 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix C Network Elem ent Defaul ts C.2.3 Defaults by Card MRC-12 .OC12 -POR T .pmthreshold s.sts3c- 9c.nea rend.15 min.UAS 10 (seco nds) 0 - 900 MRC-12 .OC12 -POR T .pmthresho lds.sts3 c-9c.ne arend.1d ay . CV 250 (B 3 count) 0 - 2073 60000 MRC-12 .OC12 -POR T .pmthreshold s.sts3c- 9c. ...

  • Cisco Systems 15454-FTF2 - page 748

    C-72 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix C Network E lement Defaults C.2.3 Defaults by Card MRC-12 .OC3-PO R T .co nfig.line.sone t.Send<FF>Do NotUse F ALSE F ALSE whe n SendDoNotUse TR UE; F ALS E, TR UE when SendDoNotUse F ALSE MRC-12 .OC3- POR T . config.line.so net.Se ndDoNo tUse F A LSE F ALSE, TRU E MRC-12 .OC ...

  • Cisco Systems 15454-FTF2 - page 749

    C-73 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix C Network Elem ent Defaul ts C.2.3 Defaults by Card MRC -12.OC3- POR T .pmthreshol ds.li ne.faren d.15min .SES 1 (seconds) 0 - 900 MRC -12.OC3- POR T .pmthreshol ds.li ne.faren d.15m in.UAS 3 (s econds) 0 - 900 MRC-12 .OC3- POR T .pmthresholds .line .farend. 1day .CV 13120 (B2 co ...

  • Cisco Systems 15454-FTF2 - page 750

    C-74 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix C Network E lement Defaults C.2.3 Defaults by Card MRC-12 .OC3- POR T .pmthresholds .sts1. farend.15 min.ES 12 (se conds) 0 - 9 00 MRC -12.OC3- POR T .pmthresholds .sts1. farend.15 min.FC 10 (c ount) 0 - 7 2 MRC -12.OC3- POR T .pmthreshol ds.sts1. farend.15 min. SES 3 (sec onds) 0 ...

  • Cisco Systems 15454-FTF2 - page 751

    C-75 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix C Network Elem ent Defaul ts C.2.3 Defaults by Card MRC-12 .OC3- POR T .pmthresholds .sts3c.fa rend.15m in.CV 25 (B3 coun t) 0 - 2 160000 MRC-12 .OC3- POR T .pmthresholds .sts3c.fa rend.15m in.ES 20 (seconds) 0 - 9 00 MRC-12 .OC3- POR T .pmthresholds .sts3c .farend.15m in.F C 10 ...

  • Cisco Systems 15454-FTF2 - page 752

    C-76 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix C Network E lement Defaults C.2.3 Defaults by Card MRC -12.OC3- POR T .pmthreshol ds.sts 3c.nea rend.1 day . U AS 10 (seco nds) 0 - 8640 0 MRC-12 .OC48 -POR T .config.line.AINSSoa kTi me 08:00 (hours:m ins) 00:00, 00:15 , 00:30 .. 48:00 MRC-12.OC48-POR T .conf ig.l ine.AlsMo de Dis ...

  • Cisco Systems 15454-FTF2 - page 753

    C-77 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix C Network Elem ent Defaul ts C.2.3 Defaults by Card MRC-12 .OC48-PO R T .phy sicalth resholds .alarm.OPT -HIGH 120 (%) OPT -LO W , OPT - LO W + 1, OPT -LOW + 2 .. 255 MRC-12 .OC48 -POR T .physicalthre sholds.a larm.OPT -LOW 80 (%) 0, 1, 2 .. OPT -HIGH MRC-12 .OC48 -POR T .physica ...

  • Cisco Systems 15454-FTF2 - page 754

    C-78 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix C Network E lement Defaults C.2.3 Defaults by Card MRC-12 .OC48 -POR T .pmthreshold s.line.n earend.1 5min.PSC-S 1 (co unt) 0 - 6 00 MRC-12 .OC48 -POR T .pmthreshold s.line.n earend.1 5min.PSC-W 1 (count) 0 - 600 MRC-12 .OC48-PO R T .pm thresho lds.line .nearend .15min.PSD 300 (sec ...

  • Cisco Systems 15454-FTF2 - page 755

    C-79 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix C Network Elem ent Defaul ts C.2.3 Defaults by Card MRC -12.OC48 -POR T .pmthresho lds.sts1 .farend.1 5min .SES 3 (seconds) 0 - 900 MRC-12 .OC48 -POR T .pmthresho lds.sts1 .farend.1 5min .U AS 10 (se conds) 0 - 9 00 MRC -12.OC48 -POR T .pmthresho lds.sts1 .farend.1 day .CV 125 (B ...

  • Cisco Systems 15454-FTF2 - page 756

    C-80 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix C Network E lement Defaults C.2.3 Defaults by Card MRC-12 .OC48 -POR T .pm thresho lds.sts1 2c-48c. farend.15mi n.FC 10 (c ount) 0 - 7 2 MRC-12 .OC48 -POR T .pmthreshold s.sts12c -48c.farend .15min. SES 3 (s econds) 0 - 900 MRC-12 .OC48 -POR T .pm thresho lds.sts1 2c-48 c.farend.15 ...

  • Cisco Systems 15454-FTF2 - page 757

    C-81 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix C Network Elem ent Defaul ts C.2.3 Defaults by Card MRC -12.OC48 -POR T .pmthresho lds.sts3 c-9c.far end.1 5min.E S 20 (seco nds) 0 - 900 MRC-12 .OC48 -POR T .pmthresho lds.sts3 c-9c.far end.1 5min.FC 10 (count) 0 - 72 MRC -12.OC48 -POR T .pmthresho lds.sts3 c-9c.far end.1 5min . ...

  • Cisco Systems 15454-FTF2 - page 758

    C-82 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix C Network E lement Defaults C.2.3 Defaults by Card C.2.3.20 MRC-2.5G-4 Card Defau lt Settings T a ble C -20 lists the MRC-2.5G-4 card default setting s. T able C-20 MRC-2.5G-4 Card Def au lt Sett ings Default Name Default V alue Default Domain MRC25G -4.OC1 2-POR T .config.line.A I ...

  • Cisco Systems 15454-FTF2 - page 759

    C-83 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix C Network Elem ent Defaul ts C.2.3 Defaults by Card MRC25G -4.OC1 2-POR T .physicalth reshold s.warning.1 5min .LBC-HIG H 200 (%) LBC -LOW , LBC-LOW + 1, LBC-LOW + 2 .. 255 MRC 25G-4.O C12-POR T .physical thresho lds.warn ing.15m in.LBC- LOW 20 (%) 0, 1, 2 .. LBC- HIGH MRC25G -4. ...

  • Cisco Systems 15454-FTF2 - page 760

    C-84 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix C Network E lement Defaults C.2.3 Defaults by Card MRC25G -4.O C12-POR T .pmthres holds.li ne.ne aren d.15min .PSD-W 300 (seconds) 0 - 900 MRC 25G-4.O C12-POR T .pmthre sholds.l ine. nearen d.15mi n.SES 1 (sec onds) 0 - 900 MRC 25G-4.O C12-POR T .pmthre shol ds.line. near end.1 5mi ...

  • Cisco Systems 15454-FTF2 - page 761

    C-85 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix C Network Elem ent Defaul ts C.2.3 Defaults by Card MRC 25G-4.O C12-POR T .pmthres holds.s ts1.faren d.1da y .CV 125 (B 3 count) 0 - 2073 60000 MRC 25G-4.O C12-POR T .pmthre sholds.s ts1.far end.1da y .ES 100 (seconds) 0 - 8640 0 MRC25G -4.O C12-POR T .pmthresho lds.s ts1.faren d ...

  • Cisco Systems 15454-FTF2 - page 762

    C-86 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix C Network E lement Defaults C.2.3 Defaults by Card MRC 25G-4.O C12-POR T .pmthres holds.s ts12c.far end. 15min.CV 75 (B3 count) 0 - 2160 000 MRC 25G-4.O C12-POR T .pmthre sholds.s ts12c.far end. 15min.E S 60 (seconds) 0 - 900 MRC 25G-4.O C12-POR T .pmthres holds.s ts12c.far end. 15 ...

  • Cisco Systems 15454-FTF2 - page 763

    C-87 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix C Network Elem ent Defaul ts C.2.3 Defaults by Card MRC25G -4.OC1 2-POR T .pmthresho lds.sts1 2c.nea rend.1d ay .PJCS-PG EN 9600 (seconds) 0 - 8640 0 MRC25G -4.OC1 2-POR T .pmthresho lds.s ts12c.nea rend.1d ay .PPJC-PD ET 5760 ( count) 0 - 6 9120000 0 MRC25G -4.OC1 2-POR T .pmthr ...

  • Cisco Systems 15454-FTF2 - page 764

    C-88 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix C Network E lement Defaults C.2.3 Defaults by Card MRC 25G-4.O C12-POR T .pmthres holds.s ts3c-9c .nea rend.1d ay . NPJC-PDET 5760 (count ) 0 - 6912 00000 MRC 25G-4.O C12-POR T .pmthres holds.s ts3c-9c .nea rend.1d ay . NPJC-PGEN 5760 ( count) 0 - 6 9120000 0 MRC25G -4.O C12-POR T ...

  • Cisco Systems 15454-FTF2 - page 765

    C-89 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix C Network Elem ent Defaul ts C.2.3 Defaults by Card MRC25G -4.O C3-POR T .physicalthre sholds.a larm.L BC-LOW 20 (%) 0, 1, 2 .. LBC- HIGH MRC25G -4.OC3 -POR T .physicalthre sholds.alarm .OPR-H IGH 200 (%) OPR-LOW , O PR-LOW + 1, OPR-LOW + 2 .. 255 MRC25G -4.OC3 -POR T .physicalth ...

  • Cisco Systems 15454-FTF2 - page 766

    C-90 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix C Network E lement Defaults C.2.3 Defaults by Card MRC25G -4.O C3-POR T .pmthreshold s.line .neare nd.15mi n.CV 1312 ( B2 count) 0 - 1377 00 MRC25G -4.O C3-POR T .pmthreshol ds.li ne.neare nd.15 min.ES 87 (seconds) 0 - 9 00 MRC25G -4.OC3 -POR T .pmthreshold s.line .nearend .15min. ...

  • Cisco Systems 15454-FTF2 - page 767

    C-91 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix C Network Elem ent Defaul ts C.2.3 Defaults by Card MRC25G -4.O C3-POR T .pmthreshol ds.sts1. farend.1 5min.UAS 10 (seconds) 0 - 9 00 MRC25G -4.O C3-POR T .pmthreshold s.sts1. farend.1 day .CV 125 (B 3 count) 0 - 2073 60000 MRC25G -4.O C3-POR T .pmthreshold s.sts1. farend.1 day . ...

  • Cisco Systems 15454-FTF2 - page 768

    C-92 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix C Network E lement Defaults C.2.3 Defaults by Card MRC25G -4.OC3 -POR T .pmthreshold s.sts3c .farend.15 min.CV 25 (B3 count) 0 - 2160 000 MRC25G -4.O C3-POR T .pmthreshold s.sts3c .farend.15 min.ES 20 (seconds) 0 - 9 00 MRC25G -4.OC3 -POR T .pmthreshold s.sts3c. farend.15 min.FC 10 ...

  • Cisco Systems 15454-FTF2 - page 769

    C-93 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix C Network Elem ent Defaul ts C.2.3 Defaults by Card MRC25G -4.OC3 -POR T .pmthreshold s.sts3c. nearen d.1day . PJCS-PGEN 9600 (seconds) 0 - 8640 0 MRC25G -4.OC3 -POR T .pmthreshold s.sts3c. nearend.1 day . PPJC-PDET 5760 ( count) 0 - 6912 00000 MRC25G -4.OC3 -POR T .pmthreshold s ...

  • Cisco Systems 15454-FTF2 - page 770

    C-94 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix C Network E lement Defaults C.2.3 Defaults by Card MRC25G -4.O C48-POR T .physical thresho lds.alar m.OPT -HIG H 120 (%) OPT -LO W , OPT -LOW + 1, OP T -LO W + 2 . . 255 MRC 25G-4.O C48-POR T .physica lthres holds.a larm. OPT -LO W 80 (%) 0, 1, 2 .. OPT -HIGH MRC25G -4.OC4 8-POR T ...

  • Cisco Systems 15454-FTF2 - page 771

    C-95 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix C Network Elem ent Defaul ts C.2.3 Defaults by Card MRC 25G-4.O C48-POR T .pmthres holds.li ne.ne aren d.15min .PSC-R 1 (count) 0 - 600 MRC 25G-4.O C48-POR T .pmthres holds.li ne.ne aren d.15min .PSC-S 1 ( count) 0 - 600 MRC 25G-4.O C48-POR T .pmthres holds.li ne.ne aren d.15min ...

  • Cisco Systems 15454-FTF2 - page 772

    C-96 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix C Network E lement Defaults C.2.3 Defaults by Card MRC 25G-4.O C48-POR T .pmthre sholds.s ectio n.near end.1 day .CV 100000 (B 1 count) 0 - 2065 82400 MRC 25G-4.O C48-POR T .pmthre sholds.s ectio n.near end.1 day .ES 5000 (seconds) 0 - 8640 0 MRC 25G-4.O C48-POR T .pmthre sholds.s ...

  • Cisco Systems 15454-FTF2 - page 773

    C-97 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix C Network Elem ent Defaul ts C.2.3 Defaults by Card MRC 25G-4.O C48-POR T .pmthre sholds.s ts1.n earend .1day .ES 100 (seconds) 0 - 8640 0 MRC25G -4.O C48-POR T .pmthresho lds.s ts1.nea rend.1d ay . FC 40 (coun t) 0 - 6 912 MRC25G -4.O C48-POR T .pmthres holds.s ts1.nea rend .1da ...

  • Cisco Systems 15454-FTF2 - page 774

    C-98 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix C Network E lement Defaults C.2.3 Defaults by Card MRC25G -4.OC4 8-POR T .pmthresho lds.sts1 2c-48c. nearend. 15min.PPJC -PGEN 60 (count) 0 - 7200000 MRC25G -4.OC4 8-POR T .pmthresho lds.s ts12c-48 c.neare nd.15mi n.SES 3 ( secon ds) 0 - 900 MRC25G -4.OC4 8-POR T .pmthresho lds.s t ...

  • Cisco Systems 15454-FTF2 - page 775

    C-99 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix C Network Elem ent Defaul ts C.3 Node Default Settings C.3 Node Default Setting s T able C-21 on page C-101 lis ts the node- lev el default se ttings for th e Cisco ONS 154 54. Cisco provides the fo llowing us er-configurable defau lts fo r ea ch Cisc o ONS 15454 node : • Circu ...

  • Cisco Systems 15454-FTF2 - page 776

    C-100 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix C Network E lement Defaults C.3 Node Defaul t Settings to be disabled when the y are prov iding service s (when the default is set to F ALSE use rs must remov e or disa ble the serv ices first, then put t he port s out o f ser vice) , and whet her t o repo rt loopb ack condit ions ...

  • Cisco Systems 15454-FTF2 - page 777

    C-101 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix C Network Elem ent Defaul ts C.3 Node Default Settings • Securi ty Policy sett ings—Se t the al lowable failed logi ns be fore loc kout, idle user tim eout for eac h user level, optional lockout duratio n or manua l unlock enable d, password reus e and chan ge frequ enc y po ...

  • Cisco Systems 15454-FTF2 - page 778

    C-102 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix C Network E lement Defaults C.3 Node Defaul t Settings NODE.circ uits.pathp rotection .SwitchOn PDIP F ALSE TR UE, F ALSE NODE.circ uits.path prote ction.VT_SD BER 1.00E- 05 1E-5, 1E-6, 1E-7, 1E-8 NODE.circ uits.pathp rotectio n.VT_SFBER 1.00E- 03 1E-3, 1E-4, 1E-5 NODE.gener al.Al ...

  • Cisco Systems 15454-FTF2 - page 779

    C-103 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix C Network Elem ent Defaul ts C.3 Node Default Settings NODE.lmp.controlChannel.HelloInt erva l 500 (ms) maximu m_of(30 0,MinHe lloInt erv al), maximu m_of(30 0,MinHe lloInt erv al) + 1, maximu m_of(30 0,MinHe lloInt erv al) + 2 .. minimum_ of(500 0,MaxH elloInt er v al,qu otient ...

  • Cisco Systems 15454-FTF2 - page 780

    C-104 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix C Network E lement Defaults C.3 Node Defaul t Settings NODE.lmp.controlChannel.MinHelloDead Interval 2000 (ms) maximum_o f(20 00,sum_of (MinH ello Inte rv al ,1)), maximu m_of(2 0 00,sum_of (MinH ello Inte rv al ,1)) + 1, maximu m_of(2 0 00,sum_of (MinH ello Inte rv al ,1)) + 2 .. ...

  • Cisco Systems 15454-FTF2 - page 781

    C-105 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix C Network Elem ent Defaul ts C.3 Node Default Settings NODE.netw ork.gen eral.Gate waySettings None Leav eAsIs, None , ENE , GNE , ProxyOnlyN ode NODE.netw ork.g eneral.Lcd Setting Allo w Conf iguratio n Allo w Configuration, Disp lay Onl y , Suppress Displ ay NODE.osi.gr eT unn ...

  • Cisco Systems 15454-FTF2 - page 782

    C-106 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix C Network E lement Defaults C.3 Node Defaul t Settings NODE.osi.t arp.LDBF lush 5 (min) 0 - 1440 NODE.osi.t arp.PDUsL1Pr opagatio n TR UE F ALSE, TR UE NODE.osi.t arp.PDUsL2Pr opagatio n TR UE F ALSE, TR UE NODE.osi.t arp.PDUsOrig ination TR UE F ALSE, TR UE NODE.osi.t arp.T1 T im ...

  • Cisco Systems 15454-FTF2 - page 783

    C-107 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix C Network Elem ent Defaul ts C.3 Node Default Settings NODE.security .dataComm.Ct cBackplan eIpDisplay Suppression TR UE F ALSE, TR UE when isSecur eModeSu pported OnCon tro lCar d T R UE; (NO T SUPPOR TED) when isSecur eModeSu pported OnCon tro lCar d F A LS E NODE.security .da ...

  • Cisco Systems 15454-FTF2 - page 784

    C-108 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix C Network E lement Defaults C.3 Node Defaul t Settings NODE.secur ity .data Comm.Secu reModeOn (May reboo t node) F ALSE F ALSE, TR UE when isSecur eModeSu pported OnCon tro lCar d T R UE; (NO T SUPPOR TED) when isSecur eModeSu pported OnCon tro lCar d F A LS E NODE.security .emsA ...

  • Cisco Systems 15454-FTF2 - page 785

    C-109 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix C Network Elem ent Defaul ts C.3 Node Default Settings NODE.security .legalDiscla imer .LoginW arningMessage <ht ml><cent er><b> W AR NIN G</b ></ cente r>Th is system is restrict ed to auth oriz ed users for b usiness purposes. Unau th oriz e d< ...

  • Cisco Systems 15454-FTF2 - page 786

    C-110 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix C Network E lement Defaults C.3 Node Defaul t Settings NODE.security .passwordChange.Ne wPasswordM ustDif ferFromOld ByNCharacter s 1 (chara cters) 1 - 5 NODE.security .passwordChange.Pr e ventR eusingLastNP asswo rds 1 (times) 1 - 10 NODE.security .passwordChange. Require Passwo ...

  • Cisco Systems 15454-FTF2 - page 787

    C-111 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix C Network Elem ent Defaul ts C.3 Node Default Settings NODE.soft ware.D efa ultDelay edUpgrad es F ALSE F ALSE , TR UE when AllowDelayedUp grades TR UE ; FA L S E w h e n AllowDelayedUp grades F ALSE NODE.timing .bits-1.AdminSSMIn STU PRS, STU, ST2 , ST3, SMC, ST4, DUS, RES when ...

  • Cisco Systems 15454-FTF2 - page 788

    C-112 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix C Network E lement Defaults C.3 Node Defaul t Settings NODE.timing .bits-1.Codin g B8ZS B8ZS, AMI when F acilityT ype DS1; HDB3, AMI wh en F acilityT ype E1; N/A when F acilityT ype 2MHz; A MI when F acilityT ype 64kHz+8kH z NODE.timing .bits-1.Codin gOut B8ZS B8ZS, AMI when F aci ...

  • Cisco Systems 15454-FTF2 - page 789

    C-113 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix C Network Elem ent Defaul ts C.3 Node Default Settings NODE.timing .bits-1.F raming ESF ESF , D4 when F acilityT ype DS1 ; F AS+ CRC , F AS+CAS, F AS+CAS+CRC, F AS, Un framed when F acilityT ype E1; N/A when F acilityT ype 2MHz; N/A when F acilityT ype 64kHz+8kH z NODE.timing .b ...

  • Cisco Systems 15454-FTF2 - page 790

    C-114 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix C Network E lement Defaults C.3 Node Defaul t Settings NODE.timing .bits-2.AdminSSMIn STU PRS, STU, ST2 , ST3, SMC, ST4, DUS, RES when //.gen eral .SSMM essageSet Generat ion 1; PRS, STU, ST2, TNC, ST3E, ST3, SMC, ST4, D US, RES when //.gen eral .SSMM essageSet Generat ion 2; G811 ...

  • Cisco Systems 15454-FTF2 - page 791

    C-115 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix C Network Elem ent Defaul ts C.3 Node Default Settings NODE.timing .bits-2.Codin gOut B8ZS B8ZS, AMI when F acilityT ypeOut DS1; HDB3, AMI whe n F acilityT ypeOut E1; N/ A when F acilityT ypeOut 2MHz; A MI when F acilityT ypeOut 6MHz NODE.timing .bits-2.Fac ilityT ype DS1 DS1, 6 ...

  • Cisco Systems 15454-FTF2 - page 792

    C-116 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix C Network E lement Defaults C.3 Node Defaul t Settings NODE.timing .bits-2.Fra mingOu t ESF ESF , D4 when F acilityT ypeOut DS1; F AS+CRC, F AS+CAS, F AS+CAS+CRC, F AS, Un framed when F acilityT ypeOut E1; N/ A when F acilityT ypeOut 2MHz; N/A when F acilityT ypeOut 6MHz NODE.timi ...

  • Cisco Systems 15454-FTF2 - page 793

    C-117 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix C Network Elem ent Defaul ts C.3.1 Time Zo nes C.3.1 Time Zone s T a ble C -22 lists the time zones that apply for node time zone defaults. T ime zones in the table ar e ordered b y their rela tiv e relationships to Greenwich Mean T ime (GMT), and the defa ult v alues are displa ...

  • Cisco Systems 15454-FTF2 - page 794

    C-118 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix C Network E lement Defaults C.3.1 Time Zo nes T able C-22 Time Zones T ime Zone (GM T +/– Ho urs) D efau lt V alue GMT -11:00 (GMT -11:00) Mi dway Islands , Sam oa GMT - 10:00 (GMT -10:00) H aw aiian I slands, T ahiti GMT -09:00 (GMT -09:00 ) Anchora ge - Ala ska GMT -08:00 ( GM ...

  • Cisco Systems 15454-FTF2 - page 795

    C-119 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix C Network Elem ent Defaul ts C.3.1 Time Zo nes GMT +02:00 (GMT +02:00 ) Amman GMT +02:00 (GMT +02:00 ) Athens , Buchare st, Istanbul GMT +02:00 (GMT +02:00 ) Beirut GMT +02:00 (GMT +02:00 ) Cape T own, Harare , Johannesburg, Pretori a GMT+02 :00 (GMT+ 02:00) Jer usalem GMT +02:0 ...

  • Cisco Systems 15454-FTF2 - page 796

    C-120 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix C Network E lement Defaults C.4 CTC Default Settings C.4 CTC Default Settings T able C-23 on page C-121 lists the CTC-le v el defau lt settings for the Cisco ONS 15454. Cisco provid es the fo llowing u ser-configurabl e defau lts fo r CTC : • Automatic Circuit Routin g—Set cir ...

  • Cisco Systems 15454-FTF2 - page 797

    C-121 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 Append ix C Network Elem ent Defaul ts C.4 CTC D efault Setting s Note Th e CTC.n etwork.Loc alDo mainCr eationA ndV i ewing NE default has been rem oved. Y ou can pr ovision this setti ng in the CTC Preferences page. T able C-23 CTC Def ault Set tings Default Name Default V alue Default ...

  • Cisco Systems 15454-FTF2 - page 798

    C-122 Cisco ONS 15454 Reference Manual, R8. 5.x 78-18106-01 Appendix C Network E lement Defaults C.4 CTC Default Settings ...

  • Cisco Systems 15454-FTF2 - page 799

    IN-1 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 INDEX Numerics 1+1 optica l port pro tect ion creat ing li near ADMs 12-31 descript ion 7-13 1:1 e lectric al ca rd pr otecti on cards suppo rted 7-2 descript ion 7-2 electric al interface asse mblies 7-6 exam ple, shelf c onfigur ation s b y EIA type 7-9 1:N electrica l card protec tion c ...

  • Cisco Systems 15454-FTF2 - page 800

    Index IN-2 Cisco ONS 154 54 Referenc e Manual, R8. 5.x 78-18106-01 deleting 14-11 descript ion 14-9 editing 14-12 list by node 14-11 loading 14-11 row display opt ions 14-12 saving 14-11 seve rit y de scri pti ons 14-9 seve rit y opt ion s 14-12 alarm s alarm suppr essed by user 14-14 alarm suppression with OOS,MT 14-3, 14-13, B-3 autodelete 14-4 c ...

  • Cisco Systems 15454-FTF2 - page 801

    Inde x IN-3 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 BBE-PM param eter 15-5 BBER-PM para meter 15-5 BBER-SM para meter 15-5 BBE-SM param eter 15-5 bidirec tional li ne switched ring . See BLSR BIEC parame ter 15-5 BITS external node timin g source 10-1 input and out put on the TCC2 card 2-8 input and out put on the TCC2 P card 2-13 in ...

  • Cisco Systems 15454-FTF2 - page 802

    Index IN-4 Cisco ONS 154 54 Referenc e Manual, R8. 5.x 78-18106-01 specifi cation s A -50 SW-LCAS 5-31 VCAT dif ferent ial delay 5-3 2 See also Ethe rnet cards CE-100 T-8 card circuit typ es 5-28 cross-connect compatibilit y 5-30 descript ion 5-28 illustration 5-29 LEDs 5-30 link cap acity adjustm ent 11-36 port statu s 5-30 slot compat ibility 5-3 ...

  • Cisco Systems 15454-FTF2 - page 803

    Inde x IN-5 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 port c olors a nd servi ce st ates 8-10 port state 11-11 comm on contro l cards See AIC- I card See TC C2 card See TC C2P card See XC10G car d See XCVT card See XC-VXC-10G card common fi ber ro uting (VCA T) 11-34 comp aring a larm profil es 14-11 comp uter r equi reme nts 8-4 condi ...

  • Cisco Systems 15454-FTF2 - page 804

    Index IN-6 Cisco ONS 154 54 Referenc e Manual, R8. 5.x 78-18106-01 consoli dating co nnec tions 8-15 icon 8-15 pin assignme nts 2-33 termination on TCC2 car d 2-7 termination o n TCC2P card 2-11 viewin g connec tions 8-14 view non-D CC nodes 8-8 DCC tunnels 11-16 DCG parame ter 15-6 DCS 12-30 deep do or ki t 1-7 deleting alar m profi les 14-11 alar ...

  • Cisco Systems 15454-FTF2 - page 805

    Inde x IN-7 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 facto ry defaul ts C-4 illustration 3-9 perform ance m onitor ing 15-16 port statu s 3-10 slot compat ibility 3-8 specifi cation s A-18 See also elect rical car ds DS3/EC1 -48 ca rd card-l eve l LEDs 3-18 descript ion 3-16 EIA compatib ility 1-17 facto ry defaul ts C-14 illustration ...

  • Cisco Systems 15454-FTF2 - page 806

    Index IN-8 Cisco ONS 154 54 Referenc e Manual, R8. 5.x 78-18106-01 facto ry defaul ts C-19 illustration 3-24 perform ance m onitor ing 15-19 port-leve l LEDs 3-25 slot compat ibility 3-22 specifi cation s A-24 See also elect rical car ds DS3XM- 12 card backpl ane c onfigura tions 3-27 card-l eve l LEDs 3-31 descript ion 3-27 EIA compatib ility 1-16 ...

  • Cisco Systems 15454-FTF2 - page 807

    Inde x IN-9 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 LEDs 5-6 port statu s 5-6 slot compat ibility 5-5 specifi cation s A-48 See also Ethe rnet cards E100T -G card cross-connect compatibilit y 5-8 descript ion 5-6 illustration 5-7 LEDs 5-8 port statu s 5-8 slot compat ibility 5-8 specifi cation s A-49 See also Ethe rnet cards E100-TX ...

  • Cisco Systems 15454-FTF2 - page 808

    Index IN- 10 Cisco ONS 154 54 Referenc e Manual, R8. 5.x 78-18106-01 proxy tunn el an d firewal l tunne l requir eme nt 13-27 SOCK S proxy serv er scen ario 13-12 enter pris e L AN. See c orp orate L AN enviro nmenta l spec ifica tions A-4 errorl ess side swit ch DS1/E1- 56 card 3-11 DS3/EC1 -48 ca rd 3-16 DS3XM- 12 card 3-27 MRC- 12 card 4-42 MRC- ...

  • Cisco Systems 15454-FTF2 - page 809

    Inde x IN- 11 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 four-fi ber BLSR s 12-6 four-nod e pa th prot ection conf igurati on 12-15 four-she lf node (fibe r-optic bus) 12-33 GNE in a multive ndor OSI network 13-50, 13-52, 13-54 G-Se ries Eth ern et c ards wit h C WDM or DW DM GBICs 5-40 integrated BLSR-DRI topology 12-21 integra ted pa ...

  • Cisco Systems 15454-FTF2 - page 810

    Index IN- 12 Cisco ONS 154 54 Referenc e Manual, R8. 5.x 78-18106-01 LEDs 6-3 modes 6-4 path trace ca pability 11-25 perform ance m onitor ing 15-52 ports, lin e rates, and connec tors 1-74 power requi remen ts A-10 specifi cation s A-53 Statistics wi ndow 15-53 SW-LCAS 11-36 temper ature ra nge A-12 Utilization window 15-54 VCAT c ircuits 11-34 Se ...

  • Cisco Systems 15454-FTF2 - page 811

    Inde x IN- 13 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 avail able t ypes 5-37 CE-1000- 4 card 5-31 compatible ca rds 4-53 CWDM and DWDM 5-39 descript ion 5-38 FC_MR-4 ca rd 6-8 G1000-4 card 5-14 G1K-4 card 5-16 overvi ew 5-36 getNext re quests. See RMON get requ ests. See RM ON GNE definition 13-14 dual GN Es on t he s ame subn et 13- ...

  • Cisco Systems 15454-FTF2 - page 812

    Index IN- 14 Cisco ONS 154 54 Referenc e Manual, R8. 5.x 78-18106-01 circuit disp lay 11-23 ML-Serie s card perf ormanc e monito ring 15-38 perform ance m onitor ing 15-38 to 15-43 IEEE 8 02.1Q 5-5, 5-7, 5-12 increa sing BLSR traffi c speed 12-37 line ar ADM tr affic speed 12-37 path protec tion traffic speed 12-37 inserti on and remov al tool BNC ...

  • Cisco Systems 15454-FTF2 - page 813

    Inde x IN- 15 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 JRE requir ement 8-4 software compati bility 8-5 jump er sla ck s torag e re els 1-53 K K byte 12-4 L label, front door 1-11 LAN interfa ce specifications A-2 LAN pin fie ld 1-70 LAN port TCC2 ca rd 2-8 TCC2P ca rd 2-12 LAP- D 13-31 laser wa rning 1-11 LBCL- AVG pa ramet er 15-7 L ...

  • Cisco Systems 15454-FTF2 - page 814

    Index IN- 16 Cisco ONS 154 54 Referenc e Manual, R8. 5.x 78-18106-01 descript ion 5-23 LEDs 5-24 port statu s 5-25 slot compat ibility 5-25 specifi cation s A-52 See also Ethe rnet cards ML100T -12 c ard cross-connect compatibilit y 5-21 descript ion 5-19 illustration 5-20 LEDs 5-20 port statu s 5-21 slot compat ibility 5-21 specifi cation s A-51 S ...

  • Cisco Systems 15454-FTF2 - page 815

    Inde x IN- 17 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 port statu s 4-49 SFP compatibility 4-53 specifi cation s A-45 topolo gies 4-46 See also optic al card s See also SFPs MT seconda ry state, definition B-2 multiple drops 11-18 N NE defaul ts. See ne twork ele ment de fault s Netscape 8-4 network c onversio ns 12-38 network e lemen ...

  • Cisco Systems 15454-FTF2 - page 816

    Index IN- 18 Cisco ONS 154 54 Referenc e Manual, R8. 5.x 78-18106-01 port statu s 4-11 slot compat ibility 4-10 specifi cation s A-30 topolo gies 4-10 See also optic al card s OC12 LR /STM4 LH 1310 card descript ion 4-11 facto ry defaul ts C-41 illustration 4-12 LEDs 4-13 perform ance m onitor ing 15-50 port statu s 4-13 slot compat ibility 4-12 sp ...

  • Cisco Systems 15454-FTF2 - page 817

    Inde x IN- 19 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 J0 section trace 11-24 LEDs 4-52 perform ance m onitor ing 15-50 port statu s 4-52 slot compat ibility 4-50 specifi cation s A-47 XFP compatibility 4-53 See also optic al card s See also XFPs OC3 IR/ STM1 SH 1 310-8 card descript ion 4-8 facto ry defaul ts C-38 illustration 4-8 LE ...

  • Cisco Systems 15454-FTF2 - page 818

    Index IN- 20 Cisco ONS 154 54 Referenc e Manual, R8. 5.x 78-18106-01 OC48 LR /STM16 LH AS 1550 ca rd descript ion 4-23 facto ry defaul ts C-49 illustration 4-24 LEDs 4-24 perform ance m onitor ing 15-50 port statu s 4-25 slot compat ibility 4-24 specifi cation s A-36 topolo gies 4-24 See also optic al card s OC48 LR 1550 c ard descript ion 4-19 fac ...

  • Cisco Systems 15454-FTF2 - page 819

    Inde x IN- 21 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 OSPF alternativ e to static routes 13-7 common scen arios 13-2 definition 13-10 in OSI routing scenarios 13-50 P passwords 9-7 patch pa nel too l 1-20, 1-27 path-p rotecte d mesh netwo rk. See PPMN path protec tion configura tions BLSR DRI handoff 12-26 circuit e diting 11-19 DRI ...

  • Cisco Systems 15454-FTF2 - page 820

    Index IN- 22 Cisco ONS 154 54 Referenc e Manual, R8. 5.x 78-18106-01 and spa n upgrad es 12-37 provisi oning 4-56 service sta te transitio ns B-10, B-10 to B-1 1 See also SFPs See also XFPs preprovisi oning card s 8-11 See also provision ing printin g CTC data 8-17 processing TARP 13-38 protec tion switc hing BLSR span switching 12-7 nonreve rtive ...

  • Cisco Systems 15454-FTF2 - page 821

    Inde x IN- 23 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 RG-179 ca ble. See co ax ial c abl e RG59 (735A ) cable. See coaxial cable RIB 13-3 4 rings maximu m per node 12-2 subtended 12-29 virtual 12-32 See also BLSR See also Path Protectio n RJ-11 orderw ire pin assignm ents 2-32 UDC pin assignm ents 2-32 RJ-45 connec tors on car ds 1-7 ...

  • Cisco Systems 15454-FTF2 - page 822

    Index IN- 24 Cisco ONS 154 54 Referenc e Manual, R8. 5.x 78-18106-01 S SAPI 13-31 SASCP-P parameter 15-10 SASP parameter 15-10 SASP-P parameter 15-10 saving al arm prof iles 14-11 SCSI connectors See UB IC-H EIA See UB IC-V EIA SDCC. See DCC SDH timing 2-13 seco ndary sour ces 11-28 secure mode backpl ane IP addre ss 13-21 behavior of locked an d u ...

  • Cisco Systems 15454-FTF2 - page 823

    Inde x IN- 25 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 comp onents 16-2 external interf aces 16-4 message typ es 16-4 MIBs 16-5 overvi ew 16-1 RMON 16-16 traps. See traps version su pport 16-4 soak time 11-8 soak time r fo r ML-S eri es Et herne t ca rds 11-9 SOCKS proxy serv er common scen arios 13-2 definition 13-12 firewall w ith S ...

  • Cisco Systems 15454-FTF2 - page 824

    Index IN- 26 Cisco ONS 154 54 Referenc e Manual, R8. 5.x 78-18106-01 alarms for maintenance 14-13 SWDL secondary state, d efinition B-2 SW-LCAS 11-36 synchroniz ation sta tus me ssaging. See SSM synchroniz ing ala rms 14-4 synchrono us payload env elope 15-4 T tabs card view 8-16 network vie w 8-13 node vie w 8-11 overvi ew 8-8 TARP data c ache 13- ...

  • Cisco Systems 15454-FTF2 - page 825

    Inde x IN- 27 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 TCP/I P and OSI mediation 13-40 DCN commu nicati on 13-29 TCC2 P acce ss 2-12 TDM 11-12 TEI 13-31 Telco rdia alarm severitie s 14-1 perform ance m onitor ing 15-1 standa rd rack s 1-3 VT mapping standard s 2-17, 2-21, 2-26 temper ature ra nges A-10 Terminal Endpoint Identifie r 13 ...

  • Cisco Systems 15454-FTF2 - page 826

    Index IN- 28 Cisco ONS 154 54 Referenc e Manual, R8. 5.x 78-18106-01 UAS-V par ameter 15-12 UBIC-H ca bles connec tor pins 1-46 descript ion 1-45 DS-1 pin assig nments 1-41, 1-47 DS-3/E C-1 pin assignm ents 1-43, 1-49 UBIC-H EI A card protec tion description 7-12 connec tor labe ling 1-35 connec tors per side 7-5 descript ion 1-34 J labeling 1-35 s ...

  • Cisco Systems 15454-FTF2 - page 827

    Inde x IN- 29 Cisco ONS 15454 Reference Man ual, R8. 5.x 78-18106-01 VT1.5 signal s BLSR exam ple 11-14 cross- conne ct car d ban dwidt h 11-12 CTC matrices 11-15 DS-1 tran sport 3-7, 3-9 DS3XM- 12 card 3-27 DS3XM- 6 card 3-25 squelch ta ble 11-23 XC10G ca rd 2-20 XCVT c ard 2-16 XC-VXC- 10G card 2-24 VT2 signals 2-24 VT mapping 2-17, 2-21, 2-26 W ...

  • Cisco Systems 15454-FTF2 - page 828

    Index IN- 30 Cisco ONS 154 54 Referenc e Manual, R8. 5.x 78-18106-01 ...

Manufacturer Cisco Systems Category Home Security System

Documents that we receive from a manufacturer of a Cisco Systems 15454-FTF2 can be divided into several groups. They are, among others:
- Cisco Systems technical drawings
- 15454-FTF2 manuals
- Cisco Systems product data sheets
- information booklets
- or energy labels Cisco Systems 15454-FTF2
All of them are important, but the most important information from the point of view of use of the device are in the user manual Cisco Systems 15454-FTF2.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Cisco Systems 15454-FTF2, service manual, brief instructions and user manuals Cisco Systems 15454-FTF2. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Cisco Systems 15454-FTF2.

A complete manual for the device Cisco Systems 15454-FTF2, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Cisco Systems 15454-FTF2 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Cisco Systems 15454-FTF2.

A complete Cisco Systems manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Cisco Systems 15454-FTF2 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Cisco Systems 15454-FTF2, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Cisco Systems 15454-FTF2, that we can find in the current document
3. Tips how to use the basic functions of the device Cisco Systems 15454-FTF2 - which should help us in our first steps of using Cisco Systems 15454-FTF2
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Cisco Systems 15454-FTF2
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Cisco Systems 15454-FTF2 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Cisco Systems 15454-FTF2?

Use the form below

If you did not solve your problem by using a manual Cisco Systems 15454-FTF2, ask a question using the form below. If a user had a similar problem with Cisco Systems 15454-FTF2 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)