Manual Craftsman 917.273322

64 pages 2.35 mb
Download

Go to site of 64

Summary
  • Craftsman 917.273322 - page 1

    Owner's Manual £RAFTZMIIN + 260 HP ELECTRIC START 50" MOWER AUTOMATIC GARDEN TRACTOR Model No. 917.273322 • Safety • Assembly • Operation • Maintenance • Repair Parts CAUTION: Read and follow all Safety Rules and Instructions before operating this equipment. For answers to your questions about this product, Call: 1-800-659-5917 ...

  • Craftsman 917.273322 - page 2

    Wal'ranty ............................................... 2 iSafety Rules .................. 2 !Pro_luct Spec f cat ons ...... 5 ;Assembly .............................................. 7 _3pe, ratibn ............................................ 12 Maihtenance Schedule ...................... 19 Maintenance ..................................... ...

  • Craftsman 917.273322 - page 3

    • Never leave a running machine unattended. Always turn off blades, set parking brake, stop engine, and remove keys before dismounting. • Turn off blades when not mowing. • Stop engine before removing grass catcher or unclogging chute. • Mow only in daylight or good artificial light. • Do not operate the machine while under the influence ...

  • Craftsman 917.273322 - page 4

    • Never run a machine inside a closed area. • Keep nuts and bolts, especially blade attachment bolts, tight and keep equipment in good condition. • Never tamper with safety devices. Check their proper operation regularly. • Keep machine free of grass, leaves, or other debris build-up. Clean oil or fuel spillage. Allow machine to cool before ...

  • Craftsman 917.273322 - page 5

    PRODUCT SPECIFICATIONS GASOLINE CAPACITY AND TYPE: OILTYPE 'API-SF/SG/SH): 3.5 GALLONS UNLEADED REGULAR SAE 10W30 (ABOVE 32°F) SAE 5W-30 (BELOW 32°F) OIL CAPACITY: W/FILTER: 4.5PINTS W/O FILTER: 4.0PINTS SPARK PLUG: CHAMPION GAP: .030") RC12YC GROUND FORWARD: 5.8 SPEED(MPH): REVERSE: 2.1 TIRE FRONT: 14 PSI PRESSURE: REAR: 10 PSI CHARGIN ...

  • Craftsman 917.273322 - page 6

    Steering Wheel Steering Sleeve Steering Sleeve Extension Steering Wheel Insert (1) Washer 17/32 x 1-3/16 x 12 Gauge (1) Knob _ Seat (1) Shoulder Bolt 5/16-18 _, Mower (4) Retainer Springs (single loop) (3) Retainer Springs (double loop) (4) Brackets Gauge Wheels (4) Adjusting Bar _ (12) Crownlock Nuts @ 5/16-18 (12) Carriage Bolts 5/16-18 x 5/8 (4) ...

  • Craftsman 917.273322 - page 7

    Nose Roller i l)))llllllllll (2) Hex Bolts 3/8-16 x 1 (2) Nylon Locknuts 3/8-16 (2) Washers 17/32 x 7/8 x 16 Ga. Video Cassette Keys (2) Keys Slope Sheet Your new tractor has been assembled at the factory with exception of those parts left unassembled for shipping purposes. To ensure safe and proper operation of your tractor all parts and hardware ...

  • Craftsman 917.273322 - page 8

    BEFORE REMOVING TRACTOR FROM SKID AI-I'ACH STEERING WHEEL • Remove hex bolt, lock washer and large flat washer from steering shaft. • Position front wheels of the tractor so they are pointing straight forward. • Slide the steering sleeve over the steering shaft. • Align tabs and press steering sleeve extension into bottom of steering w ...

  • Craftsman 917.273322 - page 9

    TO ROLL TRACTOR OFF SKID (See Operation section for location and function of controls) • Press lift lever plunger and raise attachment lift lever to its highest position. • Release parking brake by depressing clutch/brake pedal. • Place freewheel control in freewheel- ing position to disengage transmis- sion (See "TO TRANSPORT" in t ...

  • Craftsman 917.273322 - page 10

    INSTALL MOWER AND DRIVE BELT Be sure tractor is on level surface and mower suspension arms are raised with attachment lift control. Engage parking brake. • Cut and remove ties securing anti- sway bar and belts. Swing anti-sway bar to left side of mower deck. • Slide mower under tractor with discharge guard to right side of tractor. IMPORTANT: C ...

  • Craftsman 917.273322 - page 11

    CHECK TIRE PRESSURE The tires on your tractor were overin- flared at the factory for shipping pur- poses. Correct tire pressure is important for best cutting performance. • Reduce tire pressure to PSI shown in "PRODUCT SPECIFICATIONS" section of this manual. CHECK MOWER LEVELNESS For best cutting results, mower should be properly levele ...

  • Craftsman 917.273322 - page 12

    These symbols may appear on your tractor or in literature supplied with the product. Learn and understand their meaning. f BATTERY CAUTION OR REVERSE FORWARD FAST SLOW WARNING ENGINE ON ENGINE OFF OIL PRESSURE LIGHTS ON OVER TEMP ! LIGHT FUEL CHOKE MOWER HEIGHT PARKING BRAKE UNLOCKED MOWER LIFT LOCKED R N H L (® 51 ATTACHMENT REVERSE NEUTRAL HIGH ...

  • Craftsman 917.273322 - page 13

    KNOW YOUR TRACTOR READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR Compare the illustrations with your tractor to familiarize yourself with the locations of various controls and adjustments. Save this manual for future reference. {gnition Ammeter Hourmeter ^ . - • _ ,, .bwltcn Throttle Control /,, , Clutch/Brake ,_ ,&a ...

  • Craftsman 917.273322 - page 14

    The operation of any tractor can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields while operating your tractor or performing any adjustments or repairs. We recommend a wide vision safety mask over spectacles or standard safety glasses. HOW TO USE YOUR TRACTOR TO SET PAR ...

  • Craftsman 917.273322 - page 15

    The cutting height range is approxi- mately 1-1/2" to 4", The heights are measured from the ground to the blade tip with the engine not running. These heights are approximate and may vary depending upon soil conditions, height of grass and types of grass being mowed. • The average lawn should be cut to approximately 2-1/2 inches during ...

  • Craftsman 917.273322 - page 16

    TO TRANSPORT When pushing or towing your tractor, be sure to disengage transmission by placing freewheel control in freewheel- =ng position. Free wheel control is located at the rear drawbar of tractor. • Raise attachment lift to highest position with attachment lift control. • Remove retainer spring from free- wheel control rod. • Push contr ...

  • Craftsman 917.273322 - page 17

    • Sit on seat in operating position, depress clutch/brake pedal and set parking brake. • Place motioncontrol lever in neutral (N) position. • Move attachment clutchto "DISEN- GAGED" position. • Move throttle controlto fast position • Pull chokecontrol out for a cold enginestart attempt.For a warm enginestart attemptthe choke con ...

  • Craftsman 917.273322 - page 18

    NOTE: During this procedure there will be no movement of drive wheels. The air is being removed from hydraulic drive system. • Move motion control lever to neutral (N) position. Shut- off engine and set parking brake. • Engage transmission by placing freewheel control in driving position (See "TO TRANSPORT" in this section of manual). ...

  • Craftsman 917.273322 - page 19

    PILL ,. DATES R EGU LAR SERVICE /_./_O_sE R VICE DATE S Check Operator Presence and T Interlock Systems V _ I R Check for Loose Fasteners V' i1_, iA Sharpen/Replace Mower Blades V', I 0TC Lubrication Chart _ Check Battery Level a Clean Battery and Terminals If Check Transaxle Cooling II/ Adjust Blade Belt(s) Tension I_, v'° Adjust M ...

  • Craftsman 917.273322 - page 20

    TRACTOR Always observe safety rules when performing any maintenance. BRAKE OPERATION If tractor requires more than six (6) feet stopping distance at high speed in highest gear, then brake must be adjusted. (See "TO ADJUST BRAKE" in the Service and Adjustments section of this manual). TIRES • Maintain proper air pressure in all tires (Se ...

  • Craftsman 917.273322 - page 21

    BATTERY Your tractor has a battery charging system which is sufficient for normal use. However, periodic charging of the battery with an automotive charger will extend its life, • Keep battery and terminals clean. • Keep battery bolts tight. • Keep small vent holes open. • Recharge at 6-10 amperes for 1 hour. NOTE: The original equipment ba ...

  • Craftsman 917.273322 - page 22

    Air S_i n Plug Oil Fill Cap/ Dipstick CLEAN AIR SCREEN Air screen must be kept free of dirt and chaff to prevent engine damage from overheating. Clean with a wire brush or compressed air to remove dirt and stubborn dried gum fibers. CLEAN AIR INTAKE/COOLING AREAS To insure proper cooling, make sure the grass screen, cooling fins, and other external ...

  • Craftsman 917.273322 - page 23

    ,_CAUTION: Before performing any service or adjustments: • Depress clutch/brake pedal fully and set parking brake. • Place motion control lever in neutral (N) position. • Place attachment clutch in "DISENGAGED" position. • Turn ignition key "OFF" and remove key. • Make sure the blades and all moving parts have complete ...

  • Craftsman 917.273322 - page 24

    • If adjustment is necessary, make adjustment on one side of mower only. • To raise one side of mower, tighten lift link adjustment nut on that side. • To lower one side of mower, loosen lift link adjustment nut on that side. NOTE: Each full turn of adjustment nut will change mower height about 3/16". * Recheck measurements after adjust- ...

  • Craftsman 917.273322 - page 25

    Left Hand Mandrel Cover II Screws Idler Pulleys Primary Idler Arm Spring Electric Clutch Pulley t Left Hand Mandrel Mower Drive Belt Belt Keepers Bolt in '" J Mower _7 / Housing TO REPLACE MOWER BLADE DRIVE BELT Park the tractor on level surface. Engage parking brake. • Remove mower drive belt (See "TO REPLACE MOWER DRIVE BELT" ...

  • Craftsman 917.273322 - page 26

    Eventually, the internal brake will wear which may cause the mower blades to not engage, or, to not stop as required. Adjustments should be made by your nearest authorized service center/ department. • Make sure attachment clutch and ignition switches are in "OFF" position. • Adjust the three nylon Iocknuts until space between clutch ...

  • Craftsman 917.273322 - page 27

    • Retighten belt keeper above transaxle pulley. • Place belt around clutching idlers as shown, making sure to route belt inside of all belt keepers. • Check to be sure belt is positioned correctly and is on proper side of all belt keepers. • Reinstall mower. IMPORTANT: Check brake adjustment. TRANSMISSION REMOVAL/REPLACE- MENT Should your t ...

  • Craftsman 917.273322 - page 28

    TO REMOVE WHEEL FOR REPAIRS FRONT WHEEL • Block up axle securely. • Remove axle cover, retaining ring and washers to allow wheel removal. • Repair tire and reassemble. • Replace washers and snap retaining ring securely in axle groove. • Replace axle cover. REAR WHEEL • Block rear axle securely. • Remove five (5) hub bolts to allow whe ...

  • Craftsman 917.273322 - page 29

    TO REPLACEHEADLIGHTBULB • Raise hood. • Pull bulb holder out of the hole in the backside of the grill. • Replace bulb in holder and push bulb holder securely back into the hole in the backside of the grill. • Close hood. INTERLOCKSANDRELAYS Loose or damaged wiring may cause your tractor to run poorly, stop running, or prevent it from starti ...

  • Craftsman 917.273322 - page 30

    TO ADJUST CHOKE CONTROL The choke control has been preset at the factory and adjustment should not be necessary, check adjustment as de- scribed below before loosening cable. If adjustment is necessary, proceed as follows: • With engine not running, move choke control (located on dash panel) to full choke position. • Remove air cleaner cover, f ...

  • Craftsman 917.273322 - page 31

    Immediately prepare your tractor for storage at the end of the season or if the tractor will not be used for 30 days or more. CAUTION: Never store the tractor with gasoline in the tank inside a building where fumes may reach an open flame or spark. Allow the engine to cool before storing in any enclosure. TRACTOR Remove mower from tractor for winte ...

  • Craftsman 917.273322 - page 32

    TROUBLESHOOTING CHART _ROBLEM Will not start Hard to start Engine will not turn over Engine clicks but will not start Loss of power CAUSE • Out of fuel. • Engine not "CHOKED" properly. • Engine flooded. • Bad spark plug, • Dirty air filter. • Dirty fuel filter. • Water in fuel. • Loose or damaged wiring. • Carburetor out ...

  • Craftsman 917.273322 - page 33

    PROBLEM Loss of power Continued TROUBLESHOOTING CHART CAUSE • Faulty spark plug. • Dirty fuel filter. • Stale or dirty fuel. • Water in fuel. Excessive vibration Engine continues to run when operator leaves seat with attach- ment clutch engaged Poor cut - uneven Mower blades will not rotate Poor grass • Spark plug wire loose. • Dirty en ...

  • Craftsman 917.273322 - page 34

    TROUBLESHOOTINGCHART PROBLEM CAUSE Poor grass discharge (Contn) Headlight(s) not working (if so equipped) Battery willnot :harge Loss of Drive Engine "backfires" when turning engine "OFF" • Worn, bent or loose blade. • Buildup of grass, leaves, and trash under mower. • Mower drive belt worn. • Blades improperly installed ...

  • Craftsman 917.273322 - page 35

    TRACTOR -- MODEL NUMBER 917.273322 SCHEMATIC FUEL SHUT-OFF SOLENOID HEADLIGHTS PTO SWITCH POSITION CIRCUIT OFF C÷G,B÷H ON C÷F,B+E A*D BELAY IGNITION SWITCH POSITION CIRCUIT "MAKE" OFF M * G ÷ A1 NONE :)N + LIGP?r_ B÷A1 L+A2 ON B • A1 NONE ST ART B+ S + A_ NONE WIRING INSULATED CLIPS NOTE: IF WIRING INSULATED CLIPS WERE REMOVE[:) FO ...

  • Craftsman 917.273322 - page 36

    TRACTOR -- MODEL NUMBER 917.273322 ELECTRICAL 22 16' ,i_. / ...

  • Craftsman 917.273322 - page 37

    TRACTOR -- MODEL NUMBER 917.273322 ELECTRICAL KEY PART NO. NO, DESCRIPTION 1 144927 Batted/ 2 74760412 Bolt Hex Head 1/4-20 x 3/4 8 7603J Tray, Battery 10 145211 Bolt 1/4-20 x 7.5 Zinc 11 150109 Hold down Battery Dash Mount 12 145769 Nut Push Nylon 1/4" 16 153664 Switch Interlock Push-in 21 166184 Harness Socket Light w/4152J 22 4152J Bulb Lig ...

  • Craftsman 917.273322 - page 38

    TRACTOR -- MODEL NUMBER 917.273322 CHASSIS AND ENCLOSURES I / 134 21 _141 5_. _140 ' _138 / _47 ! - i k 37 ,. "_, _135 _17 133 31 l " 68/-I / 35f_! -" 1790_ h .. 7_ . 17 I 'K_ 7--_ " - --6 -- _ _130 14_477 1/49 147 / 122 / 150 _, / 122 8 / 68 I "_-30 147 122 / 147 122 28 . • i -i 47 17 43_. , 52 34 17 ! 16 IF ...

  • Craftsman 917.273322 - page 39

    TRACTOR -- MODEL NUMBER 917.273322 CHASSIS AND ENCLOSURES KEY PART KEY PART NO. NO. DESCRIPTION NO. NO. 1 150253 Rail, Frame RH VGT 56 154914 2 140506 Drawbar, Gt 4 73800700 Nut, Lock Hex 7/16 Unc 58 137113 5 163976 Dash 60 17490620 6 157882 Dash Asm., Lower VGT 63 19131614 7 17720408 Screw, Thd Cut 1/4-20 x 1/2 68 17490508 8 145186 Support, Dash l ...

  • Craftsman 917.273322 - page 40

    TRACTOR -- MODEL NUMBER 917.273322 GROUND DRIVE 73 F ;" 77 82 81 83 ,, 72 J 33 9 69 104 108_ ,.'_ _- 107 2 J 48 54 66 15 47 -," ' _115 " 7799 ,: ' ;: " : _116 23 / 67 ., 73_' 9S ; i_ -111 ¢ 1_11 ,_ 89 118 92 93 , 72 4O ...

  • Craftsman 917.273322 - page 41

    TRACTOR -- MODEL NUMBER 917.273322 GROUND DRIVE KEY PART KEY PART NO. NO. DESCRIPTION NO. NO. 2 7070E Key 1/4 x25 71 151179 3 7563R Washer, Thrust, Axle 72 STD541431 5 STD541437 Nut, Crownlock 3/8-16 73 74490548 6 STD561210 Pin, Cotter 74 142432 7 140507 WheeI, HubAssembly 76 140481 9 140080 Bolt, Hub 77 74760716 15 STD551037 Wahser 13/32 x 13/16 x ...

  • Craftsman 917.273322 - page 42

    TRACTOR -- MODEL NUMBER 917.273322 STEERING 27 42 19 27 16 30 6 17 _ 14 / L , i, 13" s 13 i // / 8 42 ...

  • Craftsman 917.273322 - page 43

    TRACTOR -- MODEL NUMBER 917.273322 STEERING KEY PART NO. NO. DESCRIPTION 1 159944X428 2 137094 3 6855M 4 161849 5 161848 6 6266H 7 121748X 8 12000029 9 121232X 10 74781044 11 136518 12 7390100O 13 121749X 14 STD551137 15 STD541537 16 145103 17 137347 18 137155 19 156011 2O 1638B7 21 159945 22 155105 23 152927 25 STD523710 26 159946X428 27 3366R 28 ...

  • Craftsman 917.273322 - page 44

    TRACTOR -- MODEL NUMBER 917.273322 ENGINE 22 _' 18 15 17 //_j/ • ÷._ _ 16 39 j_ 47_ 37 / "!_ 39 "_ 45 '_42 43 ' '_ 9 i. _ 4o 35-_. , _69 f/72 2 i 76 y_/_ 67 73 J _- F74 _F 52 7 / 38 29 [ SPARK ARRESTER KIT l 44 ...

  • Craftsman 917.273322 - page 45

    TRACTOR -- MODEL NUMBER 917.273322 ENGINE KEY PART NO. NO. DESCRIPTION 1 ....... Engine {See Breakdown) KohlerCV25S-69526 2 150249 Muffler Side 1-1/8" 5 13200300 Elbow STD 90 Degree 3/8 - 18 NPT 7 151396 Muffler Asm Guard 8 121361X Pulley V-Idler 9 150828 Belt Engine Keeper Asm VGT 96 10 105432X Bushing 11 140923 Clutch Electric 12 143996 Pull ...

  • Craftsman 917.273322 - page 46

    TRACTOR -- MODEL NUMBER 917.273322 SEAT ASSEMBLY - 1 • i ,i _-_ _ 10 . ,E I _ , . i" 5 !_1_ 15 4 [ ' 18 ,/ ( 17 12 " ,i, 2 _If 20 8-_ 7 'J i ' 22 ,t "; 21 i 3 KEY NO. 1 2 3 4 5 6 7 8 10 12 13 PART NO. DESCRIPTION 140124 Seat 140551 Bracket, Pivot Seat 140675 Strap, Fender 127018X Bolt, Shoulder 5/16-18 x .62 14500 ...

  • Craftsman 917.273322 - page 47

    DECALS TRACTOR -- MODEL NUMBER 917.273322 18 13 7 6 3 15 13 8 14 12 KEY PART NO. NO. 1 164096 2 164758 3 171702 4 171703 5 140837 6 133644 7 171814 8 164884 9 1632O4 10 156439 11 4900J 12 146790 13 163268 14 160397 KEY PART DESCRIPTION NO. NO. Decal, Dash 15 171705 Decal, Hp Engine 17 149516 Decal, Hood RH Craftsman Decal, Hood LH Craftsman 18 1640 ...

  • Craftsman 917.273322 - page 48

    TRACTOR -- MODEL NUMBER 917.273322 LIST ASSEMBLY 40 43 38 39 42 35 73 34 31 I _ 29 _2 --33 / 2 7 8 1 / i ¸¸' 3 / 12_._ 2s2P 12 _ 24_'_ ,_3 _ 13 ' !!- a ;_ J _ " 12 _ 16 23 ---_ 14 J/_,_ jj_ 15 ,_'_ 20 19 18 41 7 ' 48 ...

  • Craftsman 917.273322 - page 49

    TRACTOR -- MODEL NUMBER 917.273322 LIST ASSEMBLY KEY NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 29 30 31 32 33 34 35 38 39 40 41 42 43 70 72 NOTE: PART NO. DESCRIPTION 121006X Rod Asm., Lever 159187 Shaft Asm., Lift Vgt 159189 Lever Asm., Lilt Rh 12000022 E-Ring Truarc #5133o87 19292016 Washer 29/32 x 1-1/4 x 16 Ga. 71 ...

  • Craftsman 917.273322 - page 50

    TRACTOR - MODEL NUMBER 917.273322 MOWER DECK 48 _49 _ 63 58 103_ / 64 5 '-- 33 114 ! / 34. 105 / 45 48 48 98 / 94 / 2 21 29 22 5O ...

  • Craftsman 917.273322 - page 51

    TRACTOR - MODEL NUMBER 917.273322 MOWER DECK KEY PART NO. NO. 1 156690 2 STD541431 5 138457 6 STD624008 7 130832 8 850857 9 STD551137 10 140296 11 137380 12 129895 13 137553 14 137152 15 110485X 16 140329 17 106735X 18 19111016 19 105304X 20 123713X 21 137607 22 110452X 23 110509X 26 72110606 27 STD551037 28 132823 29 STD541437 30 157722 31 137266 ...

  • Craftsman 917.273322 - page 52

    TRACTOR - MODEL NUMBER 917.273322 TRANSAXLE--MODEL NUMBER 222-3010L _I08 I2) 52 ...

  • Craftsman 917.273322 - page 53

    TRACTOR -- MODEL NUMB ER 917.273322 TRANSAXLE--MODEL NUMBER 222-3010L KEY PART KEY PART NO. NO. DESCRIPTION NO. NO. 1 164591 Assembly, Housing, LH 72 153767 2 164592 Assembly, Housing, RH 73 142904 7 153765 Oil Seal .984 x 1.5 x .25 74 142905 16 142876 Brake Shaft Assembly 76 142907 20 142877 Axle Mounting Horn 77 142908 Assembly 78 142909 21 14287 ...

  • Craftsman 917.273322 - page 54

    TRACTOR -- MODEL NUMBER 917.273322 TRANSAXLE--MODEL NUMBER 222-3010L 6 KEY PART NO. NO. 1 144569 2 122716X 3 122745× 4 122715X 5 122700X 6 122699X 8 122767X 12 122717X 13 122748X 14 122749X 15 144571 17 122770× 19 153801 21 122722X 22 144573 23 142978 DESCRIPTION Shaft, Pump Ring, Retaining Bearing, Bail Spacer Seal, Lip Ring, Retaining Bearing, ...

  • Craftsman 917.273322 - page 55

    TRACTOR -- MODEL NUMBER 917.273322 KOHLER ENGINE-MODEL NUMBER CV25S, TYPE NUMBER 69526 CYLINDER HEAD VALVE & BREATHER I 15,_ 3 30 (_ -- 28 I 29 n 1_ 20 L_j_ 19 _ 26 27 _17 , 7-- _js flO 2 CRANKCASE I 21_ 22 20- I C)--19 "-_ , ___ _1,"-" ,3-.% -_ "-_JI 0--8 55 3 ...

  • Craftsman 917.273322 - page 56

    TRACTOR -- MODEL NUMBER 917.273322 KOHLER ENGINE-MODEL NUMBER CV25S, TYPE NUMBER 69526 HEAD/VALVEIBREATHER CRANKCASE KEY PART KEY PART NO. NO. DESCRIPTION NO. NOt DESCRIPTION 1 24-033-03 Kit, breather cover w 1 24-032-01 Seal, oil Iront gasket (Includes 2,3) 2 Crankcase (USE: Miniblock) 2 24-041-23 Gasket, breather 3 24-294-13 Fitting 3 24-096-15 C ...

  • Craftsman 917.273322 - page 57

    TRACTOR -- MODEL NUMBER 917.273322 KOHLER ENGINE-MODEL NUMBER CV25S, TYPE NUMBER 69526 IGNITION / ELECTRICALJ a_3 0f4 25 __6 24 AIR INTAKE t 11 ! 1(; Is / 13 9 BLOWER HOUSING AND BAFFLES I 8 , / 3 57 ...

  • Craftsman 917.273322 - page 58

    TRACTOR -- MODEL NUMBER 917.273322 KOHLER ENGINE-MODEL NUMBER CV25S, TYPE NUMBER 69526 IGNITIONICHARGING BLOWER HOUSING & BAFFLES KEY PART KEY PART NO. NO. DESCRIPTION NO. NO, DESCRIPTION 1 54-755-15 Kit, grass screen (includes 2-4,and 24 113 18) 2 M-0403025 Screw, hex. cap M4x0.7x25 (4) 3 X-25-92 Washer, plain 5/16" (4) 4 24-112-04 Spacer ...

  • Craftsman 917.273322 - page 59

    TRACTOR-- MODEL NUMBER 917.273322 KOHLER ENGINE-MODEL NUMBER CV25S, TYPE NUMBER 69526 STARTING SYSTEM I t8--@ , _ 17 1 _11 i_ -13 10--_9 5__4 IL PAN LUBRICATION I EN GIN E CONTROLS J 24 "_®.-'° is 3 _46 _26 /27 19F_t_ j 21 18_ / 16 15 24 59 ...

  • Craftsman 917.273322 - page 60

    TRACTOR - MODEL NUMBER 917.273322 KOHLER ENGINE-MODEL NUMBER CV25S, TYPE NUMBER 69526 STARTING SYSTEM OIL PAN/LUBRICATION KEY PART KEY PART NO. NO. DESCRIPTION NO. NO. DESCRIPTION 1 12-098-03 Starter, soleno{d shift 2 M-0839080 Screw, hex. flange M8xl.24x80 (2) 3 M-0841080 Nut, hex. flange MSx1.25 4 52-211-05 Bolt, thru M5x0.8x99 (2) 5 12-301-01 Ca ...

  • Craftsman 917.273322 - page 61

    TRACTOR -- MODEL NUMBER 917.273322 KOHLER ENGINE-MODEL NUMBER CV25S, TYPE NUMBER 69526 CRANKSHAFT J --1 EXHAUST I 1 / 1 7 lo lO 9 lO 15 61 ...

  • Craftsman 917.273322 - page 62

    TRACTOR -- MODEL NUMBER 917.273322 KOHLER ENGINE-MODEL NUMBER CV25S, TYPE NUMBER 69526 CRANKSHAFT FUEL SYSTEM KEY PART KEY PART NO. NO. DESCRIPTION NO. NO. 1 24-014-72 Crankshaft (Includes 2) 1 24-853-27 2 52-139-09 Plug, cup 2 24-041.15 EXHAUST 3 24-053o27 KEY PART NO, NO. DESCRIPTION 1 24-041-02 Gasket, exhaust (2) 4 24-041-14 2 25-072-04 Stud, M ...

  • Craftsman 917.273322 - page 63

    SUGGESTED GUIDE FOR SIGHTING SLOPES FOR SAFE OPERATION SIGHTING GUIDE ONLY RIDE UP AND DOWN HILL, NOT ACROSS HILL SIGHT AND HOLD THIS LEVEL WITH SKY LINE OR TREE. 15 ° MAX. t A Operate your Tractor up and down the face of slopes (not I I • ,A greater than 15 ), never across the face. Make turns gradu- I ally to prevent tipping or loss of control ...

  • Craftsman 917.273322 - page 64

    For in-home major brand repair service: Call 24 hours a day, 7 days a week 1-800,4-MY-HOME'" (1-800-469-4663) Para pedir servicio de reparacibn a domicilio 1-800-676-5811 In Canada for all your service and parts needs call Au Canada pour tout le service ou les pieces 1-800-665-4455 For the repair or replacement parts you need: Call 6 am - ...

Manufacturer Craftsman Category Lawn Mower

Documents that we receive from a manufacturer of a Craftsman 917.273322 can be divided into several groups. They are, among others:
- Craftsman technical drawings
- 917.273322 manuals
- Craftsman product data sheets
- information booklets
- or energy labels Craftsman 917.273322
All of them are important, but the most important information from the point of view of use of the device are in the user manual Craftsman 917.273322.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Craftsman 917.273322, service manual, brief instructions and user manuals Craftsman 917.273322. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Craftsman 917.273322.

A complete manual for the device Craftsman 917.273322, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Craftsman 917.273322 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Craftsman 917.273322.

A complete Craftsman manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Craftsman 917.273322 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Craftsman 917.273322, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Craftsman 917.273322, that we can find in the current document
3. Tips how to use the basic functions of the device Craftsman 917.273322 - which should help us in our first steps of using Craftsman 917.273322
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Craftsman 917.273322
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Craftsman 917.273322 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Craftsman 917.273322?

Use the form below

If you did not solve your problem by using a manual Craftsman 917.273322, ask a question using the form below. If a user had a similar problem with Craftsman 917.273322 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)