English dropdown-ico

Manual Cisco Systems PA-POS-2OC3

90 pages 3.37 mb
Download

Go to site of 90

Summary
  • Cisco Systems PA-POS-2OC3 - page 1

    Americas Headquarters Cisco Systems, In c. 170 West Tasman Drive San Jose, CA 951 34-1706 USA http://www.ci sco.com Tel: 408 526-4000 800 553-NETS (638 7) Fax: 408 527-0883 P A -POS-1OC3 Single-P or t P or t A dapter Installation and Conf iguration Guide Platforms: Cisco 7 20 0 VXR Router s, Cisco 720 1 Router , C isco 730 1 Router , Cisco 7304 Rou ...

  • Cisco Systems PA-POS-2OC3 - page 2

    THE SPECIFICATION S AND INFORMATION REGARDING THE P RODUCTS IN TH IS MANUAL AR E SUBJECT TO CHANGE WITHOUT NOT ICE. ALL STATEMENTS , INFORMATION, AND RECOMMENDATI ONS IN THI S MANUAL ARE BE LIEVED TO BE A CCURATE BUT ARE PRESENTED WI THOUT WARRANTY OF ANY KIND, EX PRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSI BILITY FOR THEIR APPLICATION OF ANY P ...

  • Cisco Systems PA-POS-2OC3 - page 3

    iii PA-POS-1OC3 Single-Port Port Adapter Installation and C onfigurat ion Guide OL-6514-03 CONTENTS Preface vii Document Version History vii Objectives vii Organization viii Related Documentation viii Obtaining Documentation, Obtaining Support, and Security Guid elines x CHAPTER 1 PA-POS-1OC3 Overview 1-1 PA-POS-1OC3 Overview 1-1 SONET/SDH Overview ...

  • Cisco Systems PA-POS-2OC3 - page 4

    Contents iv PA-POS-1OC3 Single-Port Port Adapter Installation an d Configuration Guide OL-6514-03 Cisco 7613 Router Slo t Numbering 1-1 9 Identifying Interface Addresses 1-20 Cisco 7200 VXR Routers Interface Addresse s 1-21 Cisco 7201 Router Interfa ce Addresses 1-2 1 Cisco 7301 Router Interfa ce Addresses 1-2 1 Cisco 7304 PCI Port Adapter Carrier ...

  • Cisco Systems PA-POS-2OC3 - page 5

    Contents v PA-POS-1OC3 Single-Port Port Adapter Installation and Configura tion Guide OL-6514-03 Cisco 7304 PCI Port Adapter Carrier Card—Removing and Inst alling a Port Adapter 3-8 Cisco 7401ASR Router—Re moving and Installing a Port Adapter 3-10 Cisco 7500 Series Routers— Removi ng and Installing a Port Adapter 3-11 Cisco 7600 Series Router ...

  • Cisco Systems PA-POS-2OC3 - page 6

    Contents vi PA-POS-1OC3 Single-Port Port Adapter Installation an d Configuration Guide OL-6514-03 ...

  • Cisco Systems PA-POS-2OC3 - page 7

    vii PA-POS-1OC3 Single-Port Port Adapter Installation and C onfigurat ion Guide OL-6514-04 Preface This preface describes th e objecti ves and or ganization of this document and e xplains ho w to f ind additional informati on on related products and serv ices. This chapter contains the follo wing sections: • Document V ersion Hist ory , page vii ...

  • Cisco Systems PA-POS-2OC3 - page 8

    viii PA-POS-1OC3 Single-Port Port Adapter Installation an d Configuration Guide OL-6514-04 Preface Organization • Cisco 7500 series rout ers, which consist of t he 5-slot Cisco 7505, the 7-slot Cisco 7507, and the 13-slot Cisco 7513 routers. • Cisco 7600 series router s, which consist of th e 3- slot Ci sco 7603, the 6-sl ot Cisco 7606, th e 9- ...

  • Cisco Systems PA-POS-2OC3 - page 9

    ix PA-POS-1OC3 Single-Port Port Adapter Installation and Configura tion Guide OL-6514-04 Preface Related Documentation – For info rmation on network p rocessing engines or network services en gines, refer to the Network Pr ocessing En gine and Networ k Servic es Engine Installation an d Config uration document . – For more inf ormation about th ...

  • Cisco Systems PA-POS-2OC3 - page 10

    x PA-POS-1OC3 Single-Port Port Adapter Installation an d Configuration Guide OL-6514-04 Preface Obtaining Documentation, Obtaining Support, and Security Guide lines • Cisco 7600 series rout ers with the Fle xW AN module: – For an online directory to qu ickly access documents for the Cisco 7 600 series routers, refer to the Cisco 7600 Series Rou ...

  • Cisco Systems PA-POS-2OC3 - page 11

    CH A P T E R 1-1 PA-POS-1OC3 Single-Port Port Adapter Installation and Configuration Guide OL-6514-04 1 PA-POS-1OC3 Overview This chapter describes the P A-POS-1OC3 and contains the follo w ing sections: • P A-POS-1OC3 Overvie w , page 1-1 • SONET/SDH Ov ervie w , page 1-2 • Features, page 1-3 • Interface Specif ications, page 1-4 • OC-3 ...

  • Cisco Systems PA-POS-2OC3 - page 12

    1-2 PA-POS-1OC3 Single-Port Port Adapter Installation an d Configuration Guide OL-6514-04 Chapter 1 PA-POS-1OC3 Overview SONET/SDH Overview Figure 1-1 sho ws the P A-POS-1OC3 faceplate. Figur e 1 -1 P A -POS-1OC3 F acepla te SONET/SDH Overview The POS specifi cation addresses the use of PPP encapsulation ove r SONET/Synchronous Digital Hierarchy (S ...

  • Cisco Systems PA-POS-2OC3 - page 13

    1-3 PA-POS-1OC3 Single-Port Port Adapter Installation and Configuration Guide OL-6514-04 Chapter 1 PA-POS-1OC 3 Overview Features The follo wing references discuss concep ts and specifications of POS and PPP: • Simpson, W , Editor , The P oint-to-P oint Protocol (PPP) , RFC 1548, Daydreamer , December 1993. • Simpson, W , Editor , PPP in HDLC - ...

  • Cisco Systems PA-POS-2OC3 - page 14

    1-4 PA-POS-1OC3 Single-Port Port Adapter Installation an d Configuration Guide OL-6514-04 Chapter 1 PA-POS-1OC3 Overview Interface Specifications Interface Specifications The physical layer interface for the P A-POS-1OC3 is Optical Carrier -3 (OC-3c), the specif ication for SONET STS-3c and SDH STM-1 transmission rates, and the P A-POS-1OC3 is d es ...

  • Cisco Systems PA-POS-2OC3 - page 15

    1-5 PA-POS-1OC3 Single-Port Port Adapter Installation and Configuration Guide OL-6514-04 Chapter 1 PA-POS-1OC 3 Overview OC-3 Optical Fiber Specific ations Ta b l e 1 - 1 lists the OC-3 optical parameters. T o calcu late link losses and dispersion losses for your application, refer to th e follo wing specif ications and documents: • EIA/TIA-IV a ...

  • Cisco Systems PA-POS-2OC3 - page 16

    1-6 PA-POS-1OC3 Single-Port Port Adapter Installation an d Configuration Guide OL-6514-04 Chapter 1 PA-POS-1OC3 Overview Using Statistics to Estimat e Link Loss and Powe r Budget Encapsulation Method Support The follo wing encapsulatio n methods are supported b y the P A-POS-1OC3: • RFC 1619 PPP ov er SONET/SDH W e recommend that you refe r to th ...

  • Cisco Systems PA-POS-2OC3 - page 17

    1-7 PA-POS-1OC3 Single-Port Port Adapter Installation and Configuration Guide OL-6514-04 Chapter 1 PA-POS-1OC 3 Overview Cables and Connec tors After system initialization, the EN ABLED LED comes on to indicate that power is received and that the P A-POS-1OC3 port adapter is enabled fo r operation. The follo wing conditio ns must all be met be fore ...

  • Cisco Systems PA-POS-2OC3 - page 18

    1-8 PA-POS-1OC3 Single-Port Port Adapter Installation an d Configuration Guide OL-6514-04 Chapter 1 PA-POS-1OC3 Overview Port Adapter Slot Lo cations on the Supported Platforms The P A-POS-1OC3 h as a single duplex LC-type rece ptacle. For SONET/SDH sin gle-mode and multimode optical fiber conn ections, you can use a simple x LC-type cable (see Fig ...

  • Cisco Systems PA-POS-2OC3 - page 19

    1-9 PA-POS-1OC3 Single-Port Port Adapter Installation and Configuration Guide OL-6514-04 Chapter 1 PA-POS-1OC 3 Overview Port Adapter Slot Locations on the Supported Platforms Figure 1-4 sho w s the slot numbering on a Cisco 7206VXR router . Figur e 1 -4 P or t Adapt er Slots in the Cisco 7206VXR Router Cisco 7201 Router Slot Numbering Figure 1-5 s ...

  • Cisco Systems PA-POS-2OC3 - page 20

    1-10 PA-POS-1OC3 Single-Port Port Adapter Installation an d Configuration Guide OL-6514-04 Chapter 1 PA-POS-1OC3 Overview Port Adapter Slot Lo cations on the Supported Platforms Cisco 7301 Router Slot Numbering Figure 1-6 sho ws the front vie w of a Cisco 7301 router w ith a port adapter installe d. There is only one port adapter slot (slot 1 ) in ...

  • Cisco Systems PA-POS-2OC3 - page 21

    1-11 PA-POS-1OC3 Single-Port Port Adapter Installation and Configuration Guide OL-6514-04 Chapter 1 PA-POS-1OC 3 Overview Port Adapter Slot Locations on the Supported Platforms Figur e 1 -8 Module Slots on the Cisco 7304 Rout er Cisco 7401ASR Router Slot Numbering Figure 1-9 sho ws the front vie w of a Cisco 7401ASR router with a port adapter insta ...

  • Cisco Systems PA-POS-2OC3 - page 22

    1-12 PA-POS-1OC3 Single-Port Port Adapter Installation an d Configuration Guide OL-6514-04 Chapter 1 PA-POS-1OC3 Overview Port Adapter Slot Lo cations on the Supported Platforms Cisco 7500 Series Routers with VIP Slot Numbering The P A-POS-1OC3 is supported on the VI P4-50, VIP4 -80, and VIP6-80 versatile interface processors used in Cisco 7500 ser ...

  • Cisco Systems PA-POS-2OC3 - page 23

    1-13 PA-POS-1OC3 Single-Port Port Adapter Installation and Configuration Guide OL-6514-04 Chapter 1 PA-POS-1OC 3 Overview Port Adapter Slot Locations on the Supported Platforms Cisco 7505 Router Slot Numbering Cisco 7505 routers ha ve four slot s for port adapters, and one slot for a Ro ute Switch Processor (RSP). The slots are numbered from bottom ...

  • Cisco Systems PA-POS-2OC3 - page 24

    1-14 PA-POS-1OC3 Single-Port Port Adapter Installation an d Configuration Guide OL-6514-04 Chapter 1 PA-POS-1OC3 Overview Port Adapter Slot Lo cations on the Supported Platforms Cisco 7507 Router Slot Numbering Cisco 7507 routers ha ve f i ve slot s for port adapters, and two slots for RSPs. The slots are numbered from left to right. Y o u can plac ...

  • Cisco Systems PA-POS-2OC3 - page 25

    1-15 PA-POS-1OC3 Single-Port Port Adapter Installation and Configuration Guide OL-6514-04 Chapter 1 PA-POS-1OC 3 Overview Port Adapter Slot Locations on the Supported Platforms Cisco 7513 Router Slot Numbering Cisco 7513 routers ( Cisco 7513 or Cisco 7513-MX) ha v e ele ven slots fo r port adapters, and two slots fo r RSPs. The slots are numbered f ...

  • Cisco Systems PA-POS-2OC3 - page 26

    1-16 PA-POS-1OC3 Single-Port Port Adapter Installation an d Configuration Guide OL-6514-04 Chapter 1 PA-POS-1OC3 Overview Port Adapter Slot Lo cations on the Supported Platforms Cisco 7600 Series Routers with FlexWAN and Enhanced FlexWAN Modules The P A-POS-10C3 is supported on a FlexW AN or Enhanced FlexW AN module used in the Cisco 76 03 router , ...

  • Cisco Systems PA-POS-2OC3 - page 27

    1-17 PA-POS-1OC3 Single-Port Port Adapter Installation and Configuration Guide OL-6514-04 Chapter 1 PA-POS-1OC 3 Overview Port Adapter Slot Locations on the Supported Platforms Cisco 7606 Router Slot Numbering Cisco 7606 routers ha ve f i ve sl ots for port adapters. The slots are n umbered from top to bottom. Y ou can place the port adapters in an ...

  • Cisco Systems PA-POS-2OC3 - page 28

    1-18 PA-POS-1OC3 Single-Port Port Adapter Installation an d Configuration Guide OL-6514-04 Chapter 1 PA-POS-1OC3 Overview Port Adapter Slot Lo cations on the Supported Platforms Cisco 7609 Router Slot Numbering Cisco 7609 routers ha ve eight slo ts for port adapters. The slots are numbered from righ t to left. Y ou can place the port adapters i n a ...

  • Cisco Systems PA-POS-2OC3 - page 29

    1-19 PA-POS-1OC3 Single-Port Port Adapter Installation and Configuration Guide OL-6514-04 Chapter 1 PA-POS-1OC 3 Overview Port Adapter Slot Locations on the Supported Platforms Cisco 7613 Router Slot Numbering Cisco 7613 routers ha ve twelv e slots for port adapters. The slots are numbered from top to bott om. Y ou can place the port a dapters in a ...

  • Cisco Systems PA-POS-2OC3 - page 30

    1-20 PA-POS-1OC3 Single-Port Port Adapter Installation an d Configuration Guide OL-6514-04 Chapter 1 PA-POS-1OC3 Overview Identifying In terface Addresses Identifying Interface Addresses This section descri bes how to identify interf ace addr esses for the P A-POS-1OC3 in supported platforms. Interface addresses specify the actual physical lo catio ...

  • Cisco Systems PA-POS-2OC3 - page 31

    1-21 PA-POS-1OC3 Single-Port Port Adapter Installation and Configuration Guide OL-6514-04 Chapter 1 PA-POS-1OC 3 Overview Identifying Interface Addresse s Cisco 7200 VXR Routers Interface Addresses In Cisco 7200 VXR rout ers, port adapter slots are numbered from the l ower left t o the upper right, beginni ng with port adapter slot 1 and continuing ...

  • Cisco Systems PA-POS-2OC3 - page 32

    1-22 PA-POS-1OC3 Single-Port Port Adapter Installation an d Configuration Guide OL-6514-04 Chapter 1 PA-POS-1OC3 Overview Identifying In terface Addresses Cisco 7304 PCI Port Adapter Carrier Card Interface Addresses In the Cisco 7304 router , port adapters are installed in a Cisco 7304 PCI port adapter carrie r card, which installs in Cisco 7304 ro ...

  • Cisco Systems PA-POS-2OC3 - page 33

    1-23 PA-POS-1OC3 Single-Port Port Adapter Installation and Configuration Guide OL-6514-04 Chapter 1 PA-POS-1OC 3 Overview Identifying Interface Addresse s Cisco 7600 Series Routers FlexWAN Module Interface Addresses In Cisco 7600 series rout ers, port adap ters are installed in a Fle xW AN or Enhanced FlexW AN module, which installs in module slot ...

  • Cisco Systems PA-POS-2OC3 - page 34

    1-24 PA-POS-1OC3 Single-Port Port Adapter Installation an d Configuration Guide OL-6514-04 Chapter 1 PA-POS-1OC3 Overview Identifying In terface Addresses ...

  • Cisco Systems PA-POS-2OC3 - page 35

    CH A P T E R 2-1 PA-POS-1OC3 Single-Port Port Adapter Installation and Configuration Guide OL-6514-04 2 Preparing for Installation This chapter describes the gene ral eq uipment, safety , and site preparat ion requirements fo r installing the P A-POS-1OC3. This chapter contains the following sections: • Required T ools and Equipment, pa ge 2-1 ? ...

  • Cisco Systems PA-POS-2OC3 - page 36

    2-2 PA-POS-1OC3 Single-Port Port Adapter Installation an d Configuration Guide OL-6514-04 Chapter 2 Preparing for Installatio n Software and Har dware Requirements Software and Hardware Requirements Ta b l e 2 - 1 lists the minimum Cisco IOS software release re quired to use the P A -POS-1OC3 in supp orted router or switch platforms. Note The P A-P ...

  • Cisco Systems PA-POS-2OC3 - page 37

    2-3 PA-POS-1OC3 Single-Port Port Adapter Installation and Configuration Guide OL-6514-04 Chapter 2 Pre paring for Installation Checking Hardware and Software Compatibility Cisco 7201 Router The P A-POS-1OC3 port adapter is instal led in the single port ad apter slot of the Cisco 7201 router . Cisco 7301 Router The P A-POS-1OC3 port adapter is insta ...

  • Cisco Systems PA-POS-2OC3 - page 38

    2-4 PA-POS-1OC3 Single-Port Port Adapter Installation an d Configuration Guide OL-6514-04 Chapter 2 Preparing for Installatio n Safety Guidelines Safety Guidelines This section pro vides safety guidelines that you should follo w when working with any equipm ent that connects to electrical power or telephone wiring. Safety Warnings Safety warnings a ...

  • Cisco Systems PA-POS-2OC3 - page 39

    2-5 PA-POS-1OC3 Single-Port Port Adapter Installation and Configuration Guide OL-6514-04 Chapter 2 Pre paring for Installation Safety Guidelines Attention IMPORT ANTES INFORMA TIONS DE SÉCURITÉ Ce symbole d'avertissement indiq ue un danger . Vous vous trouvez dans une situation pouvant entraîner des blessures ou des do mmages corporels. A v ...

  • Cisco Systems PA-POS-2OC3 - page 40

    2-6 PA-POS-1OC3 Single-Port Port Adapter Installation an d Configuration Guide OL-6514-04 Chapter 2 Preparing for Installatio n Safety Guidelines ¡Advertencia! INSTRUCCIONES IMPORT ANTES DE SEGURIDAD Este símbolo de aviso indica peligro. Existe riesgo para su integridad física. Antes de manipular cualquier equipo, conside re los riesgos de la co ...

  • Cisco Systems PA-POS-2OC3 - page 41

    2-7 PA-POS-1OC3 Single-Port Port Adapter Installation and Configuration Guide OL-6514-04 Chapter 2 Pre paring for Installation Safety Guidelines Avis o INSTRUÇÕES IMPORT ANTES DE SEGURANÇA Este símbolo de aviso significa perigo. V ocê se encontra em uma situação em que há risco de lesões corporais. Antes de trabalhar com qualquer equipam e ...

  • Cisco Systems PA-POS-2OC3 - page 42

    2-8 PA-POS-1OC3 Single-Port Port Adapter Installation an d Configuration Guide OL-6514-04 Chapter 2 Preparing for Installatio n Safety Guidelines ...

  • Cisco Systems PA-POS-2OC3 - page 43

    2-9 PA-POS-1OC3 Single-Port Port Adapter Installation and Configuration Guide OL-6514-04 Chapter 2 Pre paring for Installation Safety Guidelines Electrical Equipment Guidelines Follo w these basic guidelines when working with any electrical equipment: • Before begin ning any procedures requ iring access to the chassis interior , locate the emerge ...

  • Cisco Systems PA-POS-2OC3 - page 44

    2-10 PA-POS-1OC3 Single-Port Port Adapter Installation an d Configuration Guide OL-6514-04 Chapter 2 Preparing for Installatio n Safety Guidelines Telephone Wiring Guidelines Use the follo wing guidelines when working with an y equipment that is connected to telepho ne wiring or to other network cabl ing: • Nev er install teleph one wiring during ...

  • Cisco Systems PA-POS-2OC3 - page 45

    2-11 PA-POS-1OC3 Single-Port Port Adapter Installation and Configuration Guide OL-6514-04 Chapter 2 Pre paring for Installation FCC Class A Comp liance Laser Safety The multimode aperture has a Class 1 laser warn ing label, as sho wn in Figure 2-1 . Figure 2-1 Class 1 Laser Product W arning Label on the P A-POS-1OC3 War ni ng Class 1 laser product. ...

  • Cisco Systems PA-POS-2OC3 - page 46

    2-12 PA-POS-1OC3 Single-Port Port Adapter Installation an d Configuration Guide OL-6514-04 Chapter 2 Preparing for Installatio n FCC Class A Compliance ...

  • Cisco Systems PA-POS-2OC3 - page 47

    CH A P T E R 3-1 PA-POS-1OC3 Single-Port Port Adapter Installation and Configuration Guide OL-6514-04 3 Removing and Installing the PA-POS-1OC3 This chapter describes ho w to remov e the P A-POS-1 OC3 fro m supported pla tforms, how to install a new or replacement port adapter , and ho w to connect cables. This chapter contains the following sectio ...

  • Cisco Systems PA-POS-2OC3 - page 48

    3-2 PA-POS-1OC3 Single-Port Port Adapter Installation an d Configuration Guide OL-6514-04 Chapter 3 Removing and Installing the PA-POS-1OC3 Online Insertio n and Removal Caution Always handle the por t adapter by the carrier edges and handl e; nev er touch the port adapter co mponents or connector pins. (See Figu re 3-1 .) Figur e 3-1 Handling a Po ...

  • Cisco Systems PA-POS-2OC3 - page 49

    3-3 PA-POS-1OC3 Single-Port Port Adapter Installation and Configuration Guide OL-6514-04 Chapter 3 Removing and Installing the PA-POS-1OC3 Warnings and Cau tions OIR Functional Description The follo wing is a funct ional description of OIR for b ackground information onl y; for specific procedures for installing and replacing a po rt adapter in a s ...

  • Cisco Systems PA-POS-2OC3 - page 50

    3-4 PA-POS-1OC3 Single-Port Port Adapter Installation an d Configuration Guide OL-6514-04 Chapter 3 Removing and Installing the PA-POS-1OC3 Port Adapter Removal and Installation War ni ng Blank faceplates and c over panels serve three important functions: they preve nt exposure to hazardous voltages and currents inside the chassis; they co ntain el ...

  • Cisco Systems PA-POS-2OC3 - page 51

    3-5 PA-POS-1OC3 Single-Port Port Adapter Installation and Configuration Guide OL-6514-04 Chapter 3 Removing and Installing the PA-POS-1OC3 Port Adapter Remo val and Installation Cisco 7200 VXR Routers—Removing and Installing a Port Adapter Step 1 To remove the port adapter, place the port adapter lever in the unlocked position. (See A.) The port ...

  • Cisco Systems PA-POS-2OC3 - page 52

    3-6 PA-POS-1OC3 Single-Port Port Adapter Installation an d Configuration Guide OL-6514-04 Chapter 3 Removing and Installing the PA-POS-1OC3 Port Adapter Removal and Installation Cisco 7201 Router—Removing and Installing a Port Adapter 170902 A L A R M R J4 5 E N L IN K T X R X G B IC G IG A B IT E T H E R N ET 0/2 R J4 5 E N L IN K T X R X G B IC ...

  • Cisco Systems PA-POS-2OC3 - page 53

    3-7 PA-POS-1OC3 Single-Port Port Adapter Installation and Configuration Guide OL-6514-04 Chapter 3 Removing and Installing the PA-POS-1OC3 Port Adapter Remo val and Installation Cisco 7301 Router—Removing and Installing a Port Adapter 84129 A L A R M R J 4 5 E N L IN K T X R X G B IC G IG A B IT E T H E R N E T 0 /2 R J 4 5 E N L IN K T X R X G B ...

  • Cisco Systems PA-POS-2OC3 - page 54

    3-8 PA-POS-1OC3 Single-Port Port Adapter Installation an d Configuration Guide OL-6514-04 Chapter 3 Removing and Installing the PA-POS-1OC3 Port Adapter Removal and Installation Cisco 7304 PCI Port Adapter Carrier Card—Removing and Installing a Port Adapter Y ou can install one single-width port adapter in a Ci sco 7304 PCI port adapter ca rr ier ...

  • Cisco Systems PA-POS-2OC3 - page 55

    3-9 PA-POS-1OC3 Single-Port Port Adapter Installation and Configuration Guide OL-6514-04 Chapter 3 Removing and Installing the PA-POS-1OC3 Port Adapter Remo val and Installation Figure 3-2 illu strates how t o remov e and install a port ad apter in a Cisco 7304 PCI port adapter carrier card. Figure 3-2 Ci sc o 7 30 4 P CI Port Ada pte r C arrier Ca ...

  • Cisco Systems PA-POS-2OC3 - page 56

    3-10 PA-POS-1OC3 Single-Port Port Adapter Installation an d Configuration Guide OL-6514-04 Chapter 3 Removing and Installing the PA-POS-1OC3 Port Adapter Removal and Installation Cisco 7401ASR Router—Removing and Installing a Port Adapter 57643 Step 1 To remove the port adapter, use a number 2 Phillips screwdriver to loosen the screw on the port ...

  • Cisco Systems PA-POS-2OC3 - page 57

    3-11 PA-POS-1OC3 Single-Port Port Adapter Installation and Configuration Guide OL-6514-04 Chapter 3 Removing and Installing the PA-POS-1OC3 Port Adapter Remo val and Installation Cisco 7500 Series Routers—Removin g and Installing a Port Adapter Note: You must first remove the VIP from the chassis before removing a port adapter from the VIP. Step ...

  • Cisco Systems PA-POS-2OC3 - page 58

    3-12 PA-POS-1OC3 Single-Port Port Adapter Installation an d Configuration Guide OL-6514-04 Chapter 3 Removing and Installing the PA-POS-1OC3 Port Adapter Removal and Installation Cisco 7600 Series Router—Removing and Installing a Port Adapter Note: You must first remove the Enhanced FlexWAN Module from the chassis before removing a port adapter f ...

  • Cisco Systems PA-POS-2OC3 - page 59

    3-13 PA-POS-1OC3 Single-Port Port Adapter Installation and Configuration Guide OL-6514-04 Chapter 3 Removing and Installing the PA-POS-1OC3 Connecting PA-POS-1OC3 Interface Cab les Connecting PA-POS-1OC3 Interface Cables T o continue your P A-POS-1OC3 installation, yo u must connect the interf ace cables. The instructions that follo w apply to all ...

  • Cisco Systems PA-POS-2OC3 - page 60

    3-14 PA-POS-1OC3 Single-Port Port Adapter Installation an d Configuration Guide OL-6514-04 Chapter 3 Removing and Installing the PA-POS-1OC3 Replacing the SFP Optics Modu le Replacing the SFP Optics Module The follo wing section describes ho w to remove and instal l the small form-f actor pluggable (SFP) optics modules in the P A-POS-1OC3. Note The ...

  • Cisco Systems PA-POS-2OC3 - page 61

    3-15 PA-POS-1OC3 Single-Port Port Adapter Installation and Configuration Guide OL-6514-04 Chapter 3 Removing and Installing the PA-POS-1OC3 Replacing the SFP Optics Module T o remove the SFP optics module, perform t he following steps: Step 1 Attach an ESD wrist strap to your wrist and to the ESD connection socket on the chassis or to a bare metal ...

  • Cisco Systems PA-POS-2OC3 - page 62

    3-16 PA-POS-1OC3 Single-Port Port Adapter Installation an d Configuration Guide OL-6514-04 Chapter 3 Removing and Installing the PA-POS-1OC3 Replacing the SFP Optics Modu le Figure 3-4 Inserting an SFP Optics Module Step 4 Holding the module at the latching band (with your thumb and forefi nger), insert the SFP optics module into the slot on the p ...

  • Cisco Systems PA-POS-2OC3 - page 63

    3-17 PA-POS-1OC3 Single-Port Port Adapter Installation and Configuration Guide OL-6514-04 Chapter 3 Removing and Installing the PA-POS-1OC3 Replacing the SFP Optics Module Step 3 V erify that the SFP optics modu le is functioning, by checking that the LINK LED is green. Note The green (LINK) LED is turned on only if the ca ble is connected and the ...

  • Cisco Systems PA-POS-2OC3 - page 64

    3-18 PA-POS-1OC3 Single-Port Port Adapter Installation an d Configuration Guide OL-6514-04 Chapter 3 Removing and Installing the PA-POS-1OC3 Replacing the SFP Optics Modu le ...

  • Cisco Systems PA-POS-2OC3 - page 65

    CH A P T E R 4-1 PA-POS-1OC3 Single-Port Port Adapter Installation and Configuration Guide OL-6514-04 4 Configuring the PA-POS-1OC3 The follo wing instructions app ly to all suppor ted platforms. Minor dif ferences among the platforms—with Cisco IOS so ftware comman ds—are noted. This chapter contains the following sections: • Using the EXEC ...

  • Cisco Systems PA-POS-2OC3 - page 66

    4-2 PA-POS-1OC3 Single-Port Port Adapter Installation an d Configuration Guide OL-6514-04 Chapter 4 Config uring the PA-POS -1OC3 Configuring the Interfaces T o configure th e ne w interfaces, proceed to the “Configuri ng the Interfaces” section on page 4-2 . Configuring the Interfaces After you verif y that the ne w P A-POS-1OC3 is inst alled ...

  • Cisco Systems PA-POS-2OC3 - page 67

    4-3 PA-POS-1OC3 Single-Port Port Adapter Installation and Configuration Guide OL-6514-04 Chapter 4 Configuring the PA-POS-1OC3 Configuring the Interfaces Shutting Down an Interface Before you remove an interface that you will no t replace, or replace port adapters, use the shutdown command to shut do wn (disable) the interfaces to pre vent ano mali ...

  • Cisco Systems PA-POS-2OC3 - page 68

    4-4 PA-POS-1OC3 Single-Port Port Adapter Installation an d Configuration Guide OL-6514-04 Chapter 4 Config uring the PA-POS -1OC3 Configuring the Interfaces Step 4 Write the ne w confi guration to NVRAM as follo ws: Router# copy running-config startup-config [OK] Router# The system displays an OK message when the configuratio n has been stored in N ...

  • Cisco Systems PA-POS-2OC3 - page 69

    4-5 PA-POS-1OC3 Single-Port Port Adapter Installation and Configuration Guide OL-6514-04 Chapter 4 Configuring the PA-POS-1OC3 Configuring the Interfaces Ta b l e 4 - 3 provides examples of the show interfaces pos command for the sup ported platforms. T able 4 -3 Examples of the show interf aces pos Command for the Support ed Platfor ms PLatform Co ...

  • Cisco Systems PA-POS-2OC3 - page 70

    4-6 PA-POS-1OC3 Single-Port Port Adapter Installation an d Configuration Guide OL-6514-04 Chapter 4 Config uring the PA-POS -1OC3 Configuring the Interfaces Step 5 Re-enable interf aces by doing the f ollo wing: a. Repeat Step 3 to re-enable an interface. Substitute the no shutdo wn command for the shut down command. b. Repeat Step 4 to write the n ...

  • Cisco Systems PA-POS-2OC3 - page 71

    4-7 PA-POS-1OC3 Single-Port Port Adapter Installation and Configuration Guide OL-6514-04 Chapter 4 Configuring the PA-POS-1OC3 Configuring the Interfaces Step 1 Enter conf iguration mode an d specify that the console terminal will be the source of the conf iguration subcommands as follo ws: Router# configure terminal Enter configuration commands, o ...

  • Cisco Systems PA-POS-2OC3 - page 72

    4-8 PA-POS-1OC3 Single-Port Port Adapter Installation an d Configuration Guide OL-6514-04 Chapter 4 Config uring the PA-POS -1OC3 Customizing the Configuration Step 3 Assign an IP address and subnet mask to the interface (if IP routing is e nabled on the system) by using the ip address conf iguration sub command, as in the follo wing example: Route ...

  • Cisco Systems PA-POS-2OC3 - page 73

    4-9 PA-POS-1OC3 Single-Port Port Adapter Installation and Configuration Guide OL-6514-04 Chapter 4 Configuring the PA-POS-1OC3 Customizing the Configuration Setting the MTU Size Note The default MTU size i s 4470 byt es. The defaul t value, 4470 bytes, e xactly matches the maximum transmission unit (MTU) of t he fiber distrib uted data interf ace ( ...

  • Cisco Systems PA-POS-2OC3 - page 74

    4-10 PA-POS-1OC3 Single-Port Port Adapter Installation an d Configuration Guide OL-6514-04 Chapter 4 Config uring the PA-POS -1OC3 Customizing the Configuration Step 2 T o restore loop timing, enter the no clock sour ce internal comman d or the clock source line co mmand. Router(config)# interface pos 3/0 Router(config-if)# no clock source internal ...

  • Cisco Systems PA-POS-2OC3 - page 75

    4-11 PA-POS-1OC3 Single-Port Port Adapter Installation and Configuration Guide OL-6514-04 Chapter 4 Configuring the PA-POS-1OC3 Customizing the Configuration Step 3 T o disable SONET payload scrambling, use the no pos scramble-atm comman d. Router(config)# interface pos 3/0 Router(config-if)# no pos scramble-atm Configuring APS The follo wing e xam ...

  • Cisco Systems PA-POS-2OC3 - page 76

    4-12 PA-POS-1OC3 Single-Port Port Adapter Installation an d Configuration Guide OL-6514-04 Chapter 4 Config uring the PA-POS -1OC3 Checking the Configuration For more inf ormation on SONET APS, see the follo wing documents: • Autom atic Pr otection Switching of P acket-o ver-SO NET Cir cuits at the f ollo wing URL: http://www .cisco.com/en/US/pro ...

  • Cisco Systems PA-POS-2OC3 - page 77

    4-13 PA-POS-1OC3 Single-Port Port Adapter Installation and Configuration Guide OL-6514-04 Chapter 4 Configuring the PA-POS-1OC3 Checking the Configuration If an interf ace is shut do wn and you conf igured it as up , or if the displays indicate that the hardware is not functioning properly , ensure that the interface is properly connected and termi ...

  • Cisco Systems PA-POS-2OC3 - page 78

    4-14 PA-POS-1OC3 Single-Port Port Adapter Installation an d Configuration Guide OL-6514-04 Chapter 4 Config uring the PA-POS -1OC3 Checking the Configuration Using the show version or show hardware Commands Display the configurat ion of the system hardware , the number of each interface type installed, the Cisco IOS software v ersion, the names and ...

  • Cisco Systems PA-POS-2OC3 - page 79

    4-15 PA-POS-1OC3 Single-Port Port Adapter Installation and Configuration Guide OL-6514-04 Chapter 4 Configuring the PA-POS-1OC3 Checking the Configuration 16384K bytes of Flash internal SIMM (Sector size 256K). Configuration register is 0x0 Cisco 7201 Router—Example Output of the show version Command Follo wing is an e xample of the show v ersion ...

  • Cisco Systems PA-POS-2OC3 - page 80

    4-16 PA-POS-1OC3 Single-Port Port Adapter Installation an d Configuration Guide OL-6514-04 Chapter 4 Config uring the PA-POS -1OC3 Checking the Configuration Last reset from power-on Bridging software. X.25 software, Version 3.0.0. SuperLAT software (copyright 1990 by Meridian Technology Corp). TN3270 Emulation software. 3 Gigabit Ethernet/IEEE 802 ...

  • Cisco Systems PA-POS-2OC3 - page 81

    4-17 PA-POS-1OC3 Single-Port Port Adapter Installation and Configuration Guide OL-6514-04 Chapter 4 Configuring the PA-POS-1OC3 Checking the Configuration Using the show diag Command Display the types of port adapters in stalled in your system (and specif ic information abou t each) using the show diag slot command, wher e slot is the port adapter ...

  • Cisco Systems PA-POS-2OC3 - page 82

    4-18 PA-POS-1OC3 Single-Port Port Adapter Installation an d Configuration Guide OL-6514-04 Chapter 4 Config uring the PA-POS -1OC3 Checking the Configuration Cisco 7201 Router—Example Output of the show diag Command Follo wing is an e xample of the show diag command from a Cisco 7201 router: Router# show diag 1 Slot 1: Dual OC3 POS Port adapter, ...

  • Cisco Systems PA-POS-2OC3 - page 83

    4-19 PA-POS-1OC3 Single-Port Port Adapter Installation and Configuration Guide OL-6514-04 Chapter 4 Configuring the PA-POS-1OC3 Checking the Configuration 0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF VIP in Cisco 7500 Series Routers? ...

  • Cisco Systems PA-POS-2OC3 - page 84

    4-20 PA-POS-1OC3 Single-Port Port Adapter Installation an d Configuration Guide OL-6514-04 Chapter 4 Config uring the PA-POS -1OC3 Checking the Configuration Using the show interfaces Command Display status informat ion (including the ph ysical slot and interf ace address) for the interf aces you specifyusing the show interfaces command. For comple ...

  • Cisco Systems PA-POS-2OC3 - page 85

    4-21 PA-POS-1OC3 Single-Port Port Adapter Installation and Configuration Guide OL-6514-04 Chapter 4 Configuring the PA-POS-1OC3 Checking the Configuration Cisco 7201 Router—Example Output of the show interfaces Command Follo wing is an e xample of the show interfaces command from a Ci sco 7201 router: Router# show interfaces GigabitEthernet0/0 is ...

  • Cisco Systems PA-POS-2OC3 - page 86

    4-22 PA-POS-1OC3 Single-Port Port Adapter Installation an d Configuration Guide OL-6514-04 Chapter 4 Config uring the PA-POS -1OC3 Checking the Configuration 0 output buffer failures, 0 output buffers swapped out 0 carrier transitions POS1/1 is administratively down, line protocol is down VIP in Cisco 7500 Series Routers—Example Output o f the sh ...

  • Cisco Systems PA-POS-2OC3 - page 87

    4-23 PA-POS-1OC3 Single-Port Port Adapter Installation and Configuration Guide OL-6514-04 Chapter 4 Configuring the PA-POS-1OC3 Checking the Configuration If the connection fails, v erify that you hav e the corr ect IP address for the des tination and that the de vice is activ e (powered on), and repeat the ping command. Using loopback Commands The ...

  • Cisco Systems PA-POS-2OC3 - page 88

    4-24 PA-POS-1OC3 Single-Port Port Adapter Installation an d Configuration Guide OL-6514-04 Chapter 4 Config uring the PA-POS -1OC3 Push Mode Description Step 1 T o configure an interface fo r line loopback, enter the loop line command: Router(config)# interface pos 3/0 Router(config-if)# loop line Step 2 T o disable line loopback, enter the no loop ...

  • Cisco Systems PA-POS-2OC3 - page 89

    4-25 PA-POS-1OC3 Single-Port Port Adapter Installation and Configuration Guide OL-6514-04 Chapter 4 Configuring the PA-POS-1OC3 PA-POS-1OC3 Statistics Counters Caution On the ex ecution of either command, all theP A-POS-1OC3 and P A-POS-2OC3 port adapters installed in the router will be soft OIRed. PA-POS-1OC3 Statistics Counters The P A-POS-1OC3 m ...

  • Cisco Systems PA-POS-2OC3 - page 90

    4-26 PA-POS-1OC3 Single-Port Port Adapter Installation an d Configuration Guide OL-6514-04 Chapter 4 Config uring the PA-POS -1OC3 Making a Back-to -Back Connection Step 1 T o connect two P A-POS-1OC3-equipped routers back to back, attach the appr opriate cable betw een the OC-3 interf ace port on each P A-POS-1OC3. By default, the P A-POS-1OC3 use ...

Manufacturer Cisco Systems Category Network Card

Documents that we receive from a manufacturer of a Cisco Systems PA-POS-2OC3 can be divided into several groups. They are, among others:
- Cisco Systems technical drawings
- PA-POS-2OC3 manuals
- Cisco Systems product data sheets
- information booklets
- or energy labels Cisco Systems PA-POS-2OC3
All of them are important, but the most important information from the point of view of use of the device are in the user manual Cisco Systems PA-POS-2OC3.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Cisco Systems PA-POS-2OC3, service manual, brief instructions and user manuals Cisco Systems PA-POS-2OC3. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Cisco Systems PA-POS-2OC3.

Similar manuals

A complete manual for the device Cisco Systems PA-POS-2OC3, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Cisco Systems PA-POS-2OC3 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Cisco Systems PA-POS-2OC3.

A complete Cisco Systems manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Cisco Systems PA-POS-2OC3 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Cisco Systems PA-POS-2OC3, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Cisco Systems PA-POS-2OC3, that we can find in the current document
3. Tips how to use the basic functions of the device Cisco Systems PA-POS-2OC3 - which should help us in our first steps of using Cisco Systems PA-POS-2OC3
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Cisco Systems PA-POS-2OC3
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Cisco Systems PA-POS-2OC3 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Cisco Systems PA-POS-2OC3?

Use the form below

If you did not solve your problem by using a manual Cisco Systems PA-POS-2OC3, ask a question using the form below. If a user had a similar problem with Cisco Systems PA-POS-2OC3 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)