Manual Poulan CO20H46YT

60 pages 3.37 mb
Download

Go to site of 60

Summary
  • Poulan CO20H46YT - page 1

    OPERA TOR'S MANU AL MODEL: CO20H46YT L A WN TRACTOR AL W A YS WEAR EYE PROTECTION DURING OPERA TION Visit our website: www .poulan-pro.com WARNING: Read this Man u al and follow all Warnings and Safety Instructions. F ail ure to do so can re sult in serious in ju ry . IMPORT ANT MANU AL Do Not Throw Away Printed in U.S.A. 03076 412523 01.20.07 ...

  • Poulan CO20H46YT - page 2

    2 I. GENERAL OPERA TION • Read, understand, and follow all instructions on the machine and in the manual before starting. • Do not put hands or feet near rotating parts or under the machine. Keep clear of the discharge opening at all times. • Only allow responsible adults, who are familiar with the in struc tions, to operate the machine. • ...

  • Poulan CO20H46YT - page 3

    3 • Be sure the area is clear of bystanders before operat- ing. Stop machine if anyone enters the area. • Never carry passengers. • Do not mow in reverse unless absolutely necessary . Al ways look down and behind before and while back- ing. • Never carry children, even with the blades shut off. They may fall off and be seriously injured or ...

  • Poulan CO20H46YT - page 4

    4 SAFETY RULES ............................................................ 2 PRODUCT SPECIFICA TIONS ....................................... 4 CUSTOMER RESPONSIBILITIES ................................. 4 ASSEMBL Y .................................................................... 5 OPERA TION .................................................... ...

  • Poulan CO20H46YT - page 5

    5 UNAS SEMBLED P ARTS (2) Keys Slope Sheet Key (1) Oil Drain Tube AS SEMBL Y When right or left hand is mentioned in this man ual, it means when you are in the operating po si tion (seated be hind the steer ing wheel). TO REMOVE TRACTOR FROM CAR TON UNP ACK CARTON • Remove all accessible loose parts and parts cartons from carton. • Cut along da ...

  • Poulan CO20H46YT - page 6

    6 AS SEMBL Y CHECK TIRE PRESSURE The tires on your tractor were overinflated at the factory for shipping purposes. Correct tire pressure is important for best cutting performance. • Reduce tire pressure to PSI shown on tires. CHECK DECK LEVELNESS For best cutting results, mower housing should be properly leveled. See “TO LEVEL MOWER HOUSING” ...

  • Poulan CO20H46YT - page 7

    7 OPERA TION These symbols may appear on your tractor or in literature supplied with the product. Learn and understand their mean- ing. DANGER, KEEP HANDS AND FEET AWAY FREE WHEEL (Automatic Models only) KEEP AREA CLEAR SLOPE HAZARDS 15 15 (SEE SAFETY RULES SECTION) BATTERY REVERSE FORWARD FAST SLOW ENGINE ON ENGINE OFF FUEL CHOKE MOWER HEIGHT REVE ...

  • Poulan CO20H46YT - page 8

    8 OPERA TION KNOW YOUR TRACTOR READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERA TING YOUR TRACTOR Compare the illustrations with your tractor to familiarize yourself with the locations of various controls and ad just ments. Save this manual for future reference. Our tractors conform to the applicable safety standards of the American Nati ...

  • Poulan CO20H46YT - page 9

    9 OPERA TION FIG. 4 The operation of any tractor can result in foreign objects thrown into the eyes, which can result in severe eye dam age. Always wear safety glass es or eye shields while operating your tractor or per form ing any ad just ments or repairs. W e rec om mend standard safety glasses or a wide vision safety mask worn over spectacles. ...

  • Poulan CO20H46YT - page 10

    10 OPERA TION TO ADJUST MOWER CUT TING HEIGHT (See Fig. 8) The po si tion of the at tach ment lift le ver (A) de ter mines the cut ting height. • Put attachment lift lever in desired cutting height slot. • Slide pointer tab (T) to desired cutting height as a reminder for next time you mow . The cutting height range is ap prox i mate ly 1" ...

  • Poulan CO20H46YT - page 11

    11 S FIG. 10 OPERA TION FIG. 11 TOWING CARTS AND OTHER A T T ACH MENTS T ow only the attachments that are recommended by and comply with specifications of the manufacturer of your trac- tor . Use common sense when towing. T oo heavy of a load, while on a slope, is dangerous. Tires can lose traction with the ground and cause you to lose control of y ...

  • Poulan CO20H46YT - page 12

    12 ADD GASOLINE • Fill fuel tank to bottom of filler neck. Do not overfill. Use fresh, clean, regular un lead ed gasoline with a minimum of 87 octane. (Use of leaded gasoline will increase carbon and lead oxide deposits and reduce valve life). Do not mix oil with gasoline. Purchase fuel in quan ti ties that can be used within 30 days to assure fu ...

  • Poulan CO20H46YT - page 13

    13 FIG. 12 MOWING TIPS • Mower should be properly leveled for best mowing per - formance. See “TO LEVEL MOWER HOUSING” in the Service and Adjustments section of this manual. • The left hand side of mower should be used for trim- ming. • Drive so that clippings are discharged onto the area that has been cut. Have the cut area to the right ...

  • Poulan CO20H46YT - page 14

    14 MAINTENANCE T R A C T 0 R I ns p e ct M u ff ler /Sp ar kA rres t er C lean A ir F il t er Ch an g e E n g ine Oil ( w i th o il f il t er) R e p la c e A ir F il t er P a p er C ar t ri dg e R e p la c e Sp ar kP lu g Ch e ck E n g ine Oil L e v el C lean E n g ine Coo lin gF ins C lean A ir Sc reen 1 -C h an g e mo re oft en wh en op era t in ...

  • Poulan CO20H46YT - page 15

    15 MAINTENANCE FIG. 13 0 2 544 MANDREL ASSEMBL Y BL ADE BL ADE BOL T (SPECIAL) CENTER HOLE ST AR BA TTERY Y our tractor has a battery charging system which is suf fi cient for normal use. However , periodic charging of the battery with an automotive charger will extend its life. • Keep battery and terminals clean. • Keep battery bolts tight. ? ...

  • Poulan CO20H46YT - page 16

    16 MAINTENANCE V -BEL TS Check V -belts for deterioration and wear after 100 hours of operation and replace if necessary . The belts are not ad just able. Re place belts if they begin to slip from wear . TRANSAXLE COOLING The transmission fan and cooling fins should be kept clean to assure proper cooling. Do not attempt to clean fan or transmission ...

  • Poulan CO20H46YT - page 17

    17 MAINTENANCE MUFFLER Inspect and replace corroded muffler and spark arrester (if equipped) as it could create a fire hazard and/or dam- age. SP ARK PLUGS Replace spark plugs at the beginning of each mowing season or after every 100 hours of operation, whichever occurs first. Spark plug type and gap setting are shown in “PROD UCT SPECIFICA TIONS ...

  • Poulan CO20H46YT - page 18

    18 SERVICE AND ADJUSTMENTS WARNING: TO A VOID SERIOUS INJURY , BEFORE PERFORMING ANY SER VICE OR AD JUST MENTS: • Depress clutch/brake pedal fully and set parking brake. • Place attachment clutch in “DISENGAGED” position. • T urn ignition key to “STOP ” and remove key . • Make sure the blades and all moving parts have completely sto ...

  • Poulan CO20H46YT - page 19

    19 SERVICE AND ADJUSTMENTS D C G E F M L K R Q A P G B • A TT ACH REAR LIF T LINKS (C) - Lift rear corner of mower and position slot in link assembly over pin (D) on rear mower bracket and secure with washer and retainer spring. • Hook end of clutch cable spring (Q) into hole in idler arm (R). • Push clutch cable housing guide (P) into bracke ...

  • Poulan CO20H46YT - page 20

    20 SERVICE AND ADJUSTMENTS • If adjustment is necessary , see step in Visual Adjust- ment instructions above. • Recheck measurements, adjust if necessary until both sides are equal. FRONT -TO-BACK ADJUSTMENT (See Figs. 24 and 25) IMPORT ANT : Deck must be level side-to-side. T o obtain the best cutting re sults, the mower blades should be adjus ...

  • Poulan CO20H46YT - page 21

    21 SERVICE AND ADJUSTMENTS TO REPL ACE MOTION DRIVE BEL T (See Fig. 27) P ark the tractor on level surface. En gage parking brake. For as sis tance, there is a belt installation guide decal on bottom side of left footrest. BEL T REMOVAL - • Remove mower (See “TO RE MOVE MOWER” in this section of manual). NOTE: Observe entire motion drive belt ...

  • Poulan CO20H46YT - page 22

    22 SERVICE AND ADJUSTMENTS FIG. 28 RE TAIN ING RING WAS H ERS SQUARE KEY (REAR WHEEL ONL Y) AXLE COVER TO ST ART ENGINE WITH A WEAK BA TTERY (See Fig. 29) WARNING : Lead-acid batteries gen- er ate ex plo sive gases. Keep sparks, flame and smoking ma te ri als away from bat ter ies. Always wear eye pro tec tion when around batteries. If your battery ...

  • Poulan CO20H46YT - page 23

    23 SERVICE AND ADJUSTMENTS TO REPL ACE HEADLIGHT BULB • Raise hood. • Pull bulb holder out of the hole in the backside of the grill. • Replace bulb in holder and push bulb holder securely back into the hole in the backside of the grill. • Close hood. INTERL OCKS AND REL A YS Loose or damaged wiring may cause your tractor to run poorly , sto ...

  • Poulan CO20H46YT - page 24

    24 STORAGE Immediately prepare your tractor for storage at the end of the season or if the tractor will not be used for 30 days or more. WARNING: Never store the trac tor with gas o line in the tank inside a building where fumes may reach an open flame or spark. Allow the engine to cool before storing in any en clo sure. TRACTOR Remove mower from t ...

  • Poulan CO20H46YT - page 25

    25 TROUBLESHOOTING POINTS Will not start 1. Out of fuel. 1. Fill fuel tank. 2. Engine not “CHOKED” properly . 2. See “TO ST ART ENGINE” in Operation section. 3. Engine flooded. 3. Wait several minutes before attempting to start. 4. Bad spark plug. 4. Replace spark plug. 5. Weak or dead battery . 5. Recharge or replace battery . 6. Dirty air ...

  • Poulan CO20H46YT - page 26

    26 TROUBLESHOOTING POINTS Engine dies when 1. Reverse operation system 1. T urn ignition key to tractor is shifted (ROS) is not "ON" while ROS "ON" position. into reverse mower or other attachment See Operation section. is engaged. Engine continues to run 1. F aulty operator -safety presence control system. 1. Check wiring, swit ...

  • Poulan CO20H46YT - page 27

    27 LIMITED W ARRANTY The Manufacturer warrants to the original consumer purchaser that this product as manufactured is free from defects in materi- als and work man ship. For a period of two (2) years from date of purchase by the original consumer purchaser , we will repair or replace, at our option, without charge for parts or labor incurred in re ...

  • Poulan CO20H46YT - page 28

    28 SERVICE NOTES ...

  • Poulan CO20H46YT - page 29

    29 15 DEGREES MAX. FOLD ALONG DOTTED LINE THIS IS A 15 DEGREE SLOPE ONLY RIDE UP AND DOWN HILL, NOT ACROSS HILL SUGGESTED GUIDE FOR SIGHTING SLOPES FOR SAFE OPERATION WARNING: To avoid serious injury, operate your tractor up and down the face of slopes, never across the face. Do not mow slopes greater than 15 degrees. Make turns gradually to preven ...

  • Poulan CO20H46YT - page 30

    30 This product has been expertly en gi neered and carefully manu fac tured to rigid quality stan dards. As with all mechanical products, some adjustments or part replacement may be necessary during the life of your unit. For P arts and service, contact our authorized distributor: call 1-800-849-1297 • For replacement parts, have available the fo ...

  • Poulan CO20H46YT - page 31

    30 Ce produit, conçu avec les soins les plus attentifs, est fabriqué en accord avec des stan dards stricts. Comme pour tous les produits avec des parties mobiles, il peut être nécessaire pendant la durabilité de votre machine d’effectuer des ajustements ou le remplacement de certaines pièces . Pour les pièces de rechange et l’entretien, ...

  • Poulan CO20H46YT - page 32

    29 GUIDE SUGGÈRE POUR L'ÉVALUATION DES PENTES AFIN D'AMÉLIORER LA SÉCURITÉ D'UTILISATION TONDEZ LES PENTES EN MONTANT OU EN DESCENDANT MAIS, JAMAIS EN TRAVERS 15 DEGRÉS MAX PLIEZ SUIVANT LES POINTILLÉS CECI EST UNE PENTE A 15 DEGRÉS ...

  • Poulan CO20H46YT - page 33

    28 REMARQUES D'ENTRETIEN ...

  • Poulan CO20H46YT - page 34

    27 GARANTIE LIMITÉE Le F abricant garantit à l’acheteur initial que son produit tel que manufacturé est libre de défaut de matière et d’ouvrage. Pe ndant deux (2) ans, à compter de la date d’achat de la part de l’acheteur initial, nous réparerons où remplacerons à notre choix, gratuitement, toute pièce, sur laquelle nous estimeron ...

  • Poulan CO20H46YT - page 35

    26 GUIDE DE DÉP ANNAGE La tondeuse 1. Système de fonctionnement en marche 1. T ournez le ROS sur ON. (ou son accessoire) s’arrête arrière (ROS) est sur OFF n’est pas sur ON lorsque le tracteur passe en marche arrière Le moteur marche 1. Le système qui détecte la présence du conducteur 1. Vérifiez le câblage, les interrupteurs et les c ...

  • Poulan CO20H46YT - page 36

    25 GUIDE DE DÉP ANNAGE Le moteur refuse 1. Sans essence. 1. Remplissez le réservoir d’essence. de démarrer 2. Le moteur n’est pas démarré à froid correctement. 2. Référez-vous à la section “POUR DÉMARRER LE MOTEUR” dans la section fonctionnement. 3. Le moteur est noyé. 3. Attendez quelques minutes avant d’essayer de démarrer . ...

  • Poulan CO20H46YT - page 37

    24 ENTREPOSAGE Préparez immédiatement votre tracteur pour d’entreposage à la fin de la saison ou si le tracteur ne sera pas utilisé pendant une période de 30 jours ou plus. AVERTISSEMENT : N’entreposez jamais le trac teur dans un bâtiment lorsque le réservoir contiens d’essence où les vapeurs pour raient parvenir à une flamme nue ou ...

  • Poulan CO20H46YT - page 38

    23 REVISION ET REGL AGES POUR REMPL ACER L ’AMPOULE DES PHARES • Soulevez le capot. • Dégagez de la douille d’ampoule de l’orifice à l’arrière de la calandre. • Réinstallez l’ampoule dans la douille et poussez à fond la douille d’ampoule dans l’orifice à l’arrière de la calandre. • F ermez le capot. FIG. 31 03075 CAPO ...

  • Poulan CO20H46YT - page 39

    22 REVISION ET REGL AGES POUR DÉMARRER LE MOTEUR AVEC UNE BA T TE RIE F AIBLE (V oir la Fig. 29) AVERTISSEMENT : Les batteries au plomb et à l’aci de produisent des gaz explosifs. Gar dez les étin cel les, les flammes, les ci ga ret tes, etc. loin des batteries. Portez toujours des lu net tes protectrices lorsque vous êtes pré d'une bat ...

  • Poulan CO20H46YT - page 40

    21 RÉVISION ET RÉGL AGES POUR VÉRIFIER LES FREINS À vitesse normale et sur une surface de niveau en ciment ou pavée, si plus de 5 pieds (1,5 mètre) sont nécessaires pour ar - rêter le tracteur , vous devez faire vérifier les freins. V ous pouvez également vérifier les freins ainsi : • Stationnez le tracteur sur une surface de niveau en ...

  • Poulan CO20H46YT - page 41

    20 RÉVISION ET RÉGL AGES AJUSTEMENT A V ANT/ARRIÈRE (V oir Figs. 24 et 25 ) IMPORT ANT : La plateforme doit être au même niveau d’un côté et de l’autre. Pour obtenir de meilleurs résultats, les lames de la tondeuse doivent être ajustées de sorte que la pointe avant est 1/8" à 1/2" inférieure à la pointe arrière lorsque l ...

  • Poulan CO20H46YT - page 42

    19 REVISION ET REGL AGES D C G E F M L K R Q A P G B E F H J A B C D • A TT ACHEZ LES BIELLES ARRIÈRES (C) – Soulevez le coin arrière de la tondeuse et positionnez la rainure du bras sur la tige (D) du support arrière de la tondeuse et fixez fermement à l’aide d’une rondelle et d’un ressort-arrêtoir . • Accrochez le ressort d’emb ...

  • Poulan CO20H46YT - page 43

    18 REVISION ET REGL AGES ADVERTISSEMENT : POUR ÉVITER DES DOMMAGES SÉRIEUX, AV ANT DE F AIRE TOUS LES RÉVISIONS OU RÉGL AGES. • Appuyez sur la pédale de frein/embrayage et engagez le frein de stationnement. • Placez l’embrayage d’accessoire en position débrayée (DISENGAGED). • T ournez la clé de contact à la position d’arrêt ( ...

  • Poulan CO20H46YT - page 44

    17 ENTRETIEN FIL TRE D'ESSENCE BRIDE DE SERRAGE FIG. 16 NETTOY AGE • Nettoyez le moteur , la batterie, le siège, et la finition, etc. de toutes les matières étrangères. • Conservez la propreté de la finition et des roues en enlevant soigneusement l’essence, l”huile etc. • Protégez les surfaces peintes avec une cire d’auto. No ...

  • Poulan CO20H46YT - page 45

    16 ENTRETIEN COURROIES TRAPÉZOÏDALES Vérifiez les courroies trapézoïdales pour la détérioration et l’usure après les 100 heures d’utilisation. Remplacez-les si nécessaire. Les courroies ne sont pas réglables. Remplacez les courroies si elles glissent à cause de l’usure. REFROIDISSEMENT DE L A TRANSMISSION Le ventilateur et les aile ...

  • Poulan CO20H46YT - page 46

    15 ENTRETIEN 02544 L AME ENSEMBLE DU MANDRIN BOUL ON DE L AME (SPÉCIAL) ÉTOILE TROU DU CENTRE ENLEVER L A L AME (V oir la Fig. 13) • Rellvez la tondeuse le plus haut possible pour avoir aux lames. REMARQUE: Protégez vos mains avec des gants et/ou en ve lop pez la lame dans un linge épais. • Enlevez le boulon de lame en le tournant dans le s ...

  • Poulan CO20H46YT - page 47

    14 ENTRETIEN LES RECOMMANDA TIONS GÉNÉRALES La garantie pour ce tracteur ne couvre pas les éléments qui ont été sujets soit à un abus ou à des négligences de la part de l’opérateur . Pour conserver une garantie complète, l’utilisateur doit maintenir le tracteur tel que précisé dans ce manuel. Quelques ajustements sont nécessaires ...

  • Poulan CO20H46YT - page 48

    13 FIG. 12 CONSEILS DE TONDRE • Assurez-vous que votre tondeuse soit correctement nivelée pour le meilleur rendement. (V oir la section de “Pour Niveler le carter de T ondeuse” sous Entretien et Ré gla ges de ce ma nuel). • V ous devez utiliser le côté gauche de la tondeuse pour la taille. • Conduisez de manière à ce que l’herbe c ...

  • Poulan CO20H46YT - page 49

    12 REMPLIR LE RÉSERVOIR D’ESSENCE • Remplissez le réservoir d’essence. Remplissez le réservoir d’es sen ce jusqu’au fond de son goulot de rem plis sa ge. N’en mettez pas trop. Utilisez de l’essence sans plomb, régulière, fraîche, et propre avec un indice d'octane au moins 87. (L ’uti li sa tion d’essence sans plomb tend ...

  • Poulan CO20H46YT - page 50

    11 FIG. 10 UTILISA TION FIG. 11 POUR TRANSPORTER LE TRACTEUR (V oir les Fig. 3 et 11) Quand vous poussez ou remorquez le tracteur , assurez-vous que la transmission soit désengrenée en déplaçant la com man de de roue libre à la position à roue libre. La commande de roue libre est située sur la barre d’attelage arrière du tracteur . • So ...

  • Poulan CO20H46YT - page 51

    10 UTILISA TION POUR RÉGLER L A HAUTEUR DE COUPE DE L A TON DEU SE (V oir la Fig. 8) La position du levier d’accrochage (B) détermine la hauteur de la tonte. • Placez le levier d’accrochage dans la rainure correspondant à la hauteur désirée. • Faites glisser la languette (T) à la hauteur de tonte désirée à titre de rappel. Excellen ...

  • Poulan CO20H46YT - page 52

    9 UTILISA TION L ’utilisation d’un tracteur présente le risque de projection des particules dans les yeux qui peuvent causer des bles su res sérieuses. Portez toujours des lunettes de sécurité ou une visière pendant que vous utilisez, ou que vous faites des réglages ou des réparations au tracteur . Nous recommandons des lunettes de sécu ...

  • Poulan CO20H46YT - page 53

    8 UTILISA TION CONNAIS SEZ VOTRE TRACTEUR AV ANT D'UTILISER VOTRE TRACTEUR, LISEZ CE MANUEL DE PROPRIET AIRE ET LES REGLES DE SE CU RITE Comparez les illustrations ci-dessous à celles de votre tracteur afin de vou familiariser avec l'emplacement des différentes co mmandes et avec les réglages. Gardez ce manuel pour référence . Nos tr ...

  • Poulan CO20H46YT - page 54

    7 UTILISA TION Ces symboles peuvent se montrer sur votre tracteur ou dans les publications fournies avec le produit. Apprenez et comprenez la signification des symboles. DANGER, GARDEZ LES MAINS ET PIEDS LOIN ROUE LIBRE (Seulement pour les mod les) GARDER L'AIRE LIBRE RISQUE PENTE 15 15 (VOYEZ SECURITE REGLES PARTIE) BATTERIE MARCHE ARRIÉRE M ...

  • Poulan CO20H46YT - page 55

    6 MONT AGE VÉRIFIER L A PRES SION DES PNEUS Les pneus de votre tracteur ont été surgonflés à l’usine pour l’ex pé di tion. La pression de pneu correcte est importante pour les meilleurs résultats de tonte. • Réduisez la pression à l’intérieur des pneus à la valeur en PSI indiquée sur ceux-ci. VÉRIFIER SI L A TONDEUSE EST DE NIV ...

  • Poulan CO20H46YT - page 56

    5 PIÉCES NON MONTÉES Clés ( 2 ) Clés Guide-pente Tube de Vidange MONT AGE Quand on utilise l’expression “DROITE” ou “GAUCHE”, elle signifie la droite ou la gauche à partir de la position derrière le volant de direction. POUR SORTIR LE TRACTEUR DU CAR TON DEBALLEZ LE CARTON • Enlevez toutes les pièces détachées et les petites bo ...

  • Poulan CO20H46YT - page 57

    4 SPÉCIFICA TIONS DE PRODUIT SOMMAIRE RÈGLES DE SÉCURITÉ ................................................ 2 SPÉCIFICA TIONS DE PRODUIT ................................ 4 RESPONSABILITÉS DU CLIENT ................................. 4 MONT AGE ..................................................................... 5 UTILISA TION .................. ...

  • Poulan CO20H46YT - page 58

    3 RÈGLES DE SÉCURITÉ Conseils pour l’utilisation en toute sécurité des tracteurs III. ENF ANTS Des accidents tragiques peuvent avoir lieu si l’opérateur ne fait pas très attention en présence d’enfants. Les enfants sont souvent très attirés par la machine et par la tonte. Ne croyez jamais que les enfants restent immobiles à l’end ...

  • Poulan CO20H46YT - page 59

    2 AVERTISSEMENT : Ne descendez pas les pentes à point mort, vous pourriez perdre la com man de du trac teur . AVERTISSEMENT : Remorquez seulement les ac ces soi res recommandées par et selon les spé ci fi ca tions du fabricant de votre trac teur . Utlisez votre bon sens pendant que vous remoruez. Opérez seulement avec la vitesse la plus ré dui ...

  • Poulan CO20H46YT - page 60

    MANUEL DE L'OPERA TEUR MODÈLE: CO20H46YT TRACTEUR DE PEL OUSE Portez toujours des lunettes de sécurité lors de l’utilisation. Visitez notre site web: www .poulan-pro.com IMPRIMÉ AUX É.-U. AVERTISSEMENT : Lisez soigneusement le man uel suivez tous les aver tis se ments et les in struc tions de sécurité. Les bles- sures sérieuses peuve ...

Manufacturer Poulan Category Lawn Mower

Documents that we receive from a manufacturer of a Poulan CO20H46YT can be divided into several groups. They are, among others:
- Poulan technical drawings
- CO20H46YT manuals
- Poulan product data sheets
- information booklets
- or energy labels Poulan CO20H46YT
All of them are important, but the most important information from the point of view of use of the device are in the user manual Poulan CO20H46YT.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Poulan CO20H46YT, service manual, brief instructions and user manuals Poulan CO20H46YT. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Poulan CO20H46YT.

Similar manuals

A complete manual for the device Poulan CO20H46YT, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Poulan CO20H46YT by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Poulan CO20H46YT.

A complete Poulan manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Poulan CO20H46YT - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Poulan CO20H46YT, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Poulan CO20H46YT, that we can find in the current document
3. Tips how to use the basic functions of the device Poulan CO20H46YT - which should help us in our first steps of using Poulan CO20H46YT
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Poulan CO20H46YT
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Poulan CO20H46YT in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Poulan CO20H46YT?

Use the form below

If you did not solve your problem by using a manual Poulan CO20H46YT, ask a question using the form below. If a user had a similar problem with Poulan CO20H46YT it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)