English dropdown-ico

Manual Cisco Systems 3550

86 pages 3.25 mb
Download

Go to site of 86

Summary
  • Cisco Systems 3550 - page 1

    Corporate He adquarters Cisc o Syst ems , Inc . 170 West Ta sman Drive San Jos e, CA 95 134-1706 USA http://www.ci sco.com Tel: 408 526-4000 800 553- NETS (638 7) Fax: 408 526-4100 Catal yst 3 550 Mult ila y er S witc h Hardware Installation Guide No vember 20 04 Text Pa rt Nu mber: OL-6155- 01 ...

  • Cisco Systems 3550 - page 2

    THE SPECIFICATIONS AND INFORMATION REGARDING TH E PRODUCTS IN THIS MANUAL ARE SUBJE CT TO CHANGE WITHOUT NO TICE. ALL STATEMENT S, INFORMATI ON, AND RECOMMENDA TIONS IN T HIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRES ENTED WITHOUT WARRANTY OF ANY KIND, EXPRE SS OR IMPLIED. USERS MUST TA KE FULL RESPONSIBILITY FOR THEIR AP PLICATION OF ANY PRO ...

  • Cisco Systems 3550 - page 3

    iii Catalyst 3550 Multilay er Switch Hardware Installati on Guide OL-6155-01 CONTENTS Preface vi i Audienc e vii Pur pose vii Conv enti ons vii Relat ed P ubl icatio ns xiii Obtain ing Documentati on xiv Cisco. com xi v Document ation C D-ROM xi v Orderi ng Documenta t ion xv Document ation Feedba ck xv Obtain ing Technica l Assist ance xv Cisco TA ...

  • Cisco Systems 3550 - page 4

    Cont ents iv Catalyst 3550 Multilay e r Switch Hardware Insta llation Guide OL-6155-01 CHAPTER 2 Swit ch Ins talla tion 3-1 Prepar ing for Inst allati on 3-1 Warnings 3-1 Site R equ irem ents 3-4 Verif ying Packa ge Contents 3-4 Instal ling the Swit ch 3-5 Rack-Mou nting 3-5 Attachi ng Brackets to th e Catalyst 3550- 12T and 3550-12G Swi tches 3-6 ...

  • Cisco Systems 3550 - page 5

    Content s v Catalyst 3550 Multilay er Switch Hardware Installati on Guide OL-6155-01 Cable an d Adapter Specifi cation s B- 3 Two T wiste d-Pair Cable Pinouts B-3 Four Tw isted- Pair Cable Pino uts for 10/ 100 Ports B-3 Four Tw isted- Pair Cabl e Pinouts for 1000BASE-T Ports B-4 Rollov er Cable and Adapte r Pinouts B-5 Identi fying a Rollov er Cabl ...

  • Cisco Systems 3550 - page 6

    Cont ents vi Catalyst 3550 Multilay e r Switch Hardware Insta llation Guide OL-6155-01 ...

  • Cisco Systems 3550 - page 7

    vii Catalyst 3550 Multilay e r Switch Hardware Insta llation Guide OL-6155-01 Preface Audience This guide is for the netwo rking or computer tech nician responsible for installing the Catalyst 3550 multilayer switches. W e a ssume that you ar e familiar with the concepts and terminology of Etherne t and local a rea netw orking. Purpose This gu ide ...

  • Cisco Systems 3550 - page 8

    viii Catalyst 3550 Multilay er Switch Hardware Installati on Guide OL-6155-01 Preface Conv entions Cautio n Means re a d e r b e c a re f u l . In this situation, you might do something that cou ld result in equipment dam age or loss of data. War ni n g IMPORT AN T SAFE TY INSTRUC TIONS This warning symbol means danger . Y ou are in a situation tha ...

  • Cisco Systems 3550 - page 9

    ix Catalyst 3550 Multilay e r Switch Hardware Insta llation Guide OL-6155-01 Pre face Convent ions War n un g WICH TIGE SI CHER HEITSH INWEI SE Dieses Warnsym bol bedeutet Gefahr . Sie befinden sich in einer Situation, die zu V erletzungen führen kann. Machen Sie si ch vor der Arbeit mit Geräten mit den Gefahren elektrischer Schaltungen und den ? ...

  • Cisco Systems 3550 - page 10

    x Catalyst 3550 Multilay er Switch Hardware Installati on Guide OL-6155-01 Preface Conv entions Va r n i n g ! VIKTIGA SÄ KERHETS ANVISN INGAR Denna varningssignal signalerar fara. Du befinner dig i en sit uation som kan leda till personskada. Innan du utför arbete på någon utrustning måste du vara medveten om farorna med elkretsar och känna ...

  • Cisco Systems 3550 - page 11

    xi Catalyst 3550 Multilay e r Switch Hardware Insta llation Guide OL-6155-01 Pre face Convent ions Av is o INSTR UÇÕES IM PORT AN TES DE SEGURAN ÇA Este símbolo de aviso signi fica perigo. V ocê se encontra em uma situação em que há risco de lesões corporais. Antes de trabalhar com qualquer equipamento, esteja ciente dos ris cos que envolv ...

  • Cisco Systems 3550 - page 12

    xii Catalyst 3550 Multilay er Switch Hardware Installati on Guide OL-6155-01 Preface Conv entions ...

  • Cisco Systems 3550 - page 13

    xiii Catalyst 3550 Multilay e r Switch Hardware Insta llation Guide OL-6155-01 Pre face Relate d Publicati ons Related Publications These do cuments p rovid e comple te informati o n about th e switch and ar e av ailable from this U R L: http://www .cisco.com/uni vercd/ cc/td/doc/pr oduct/lan/c3 550/index .htm Y ou can ord er printed c opies of d o ...

  • Cisco Systems 3550 - page 14

    xiv Catalyst 3550 Multilay er Switch Hardware Installati on Guide OL-6155-01 Preface Obtain ing Do cument ation • Device manage r on line he lp (available on the s witch) • Getting Starte d with Cisco Network Assistant (not or derable but av a ilab le on Cisco.c om) • 1000B ASE-T Gi gabit Interface Con verter Insta llation Note (not orderabl ...

  • Cisco Systems 3550 - page 15

    xv Catalyst 3550 Multilay e r Switch Hardware Insta llation Guide OL-6155-01 Pre face Obtaining Technical Assistance Ordering Docume ntation Y ou can find ins tructio ns for orderi ng do cument atio n at thi s U RL: http://www .cisco.com/uni vercd/cc/t d /doc/es_inpck /pdi.htm Y ou can order Cisco documen tation i n these ways: • Re gistered Cisc ...

  • Cisco Systems 3550 - page 16

    xvi Catalyst 3550 Multilay er Switch Hardware Installati on Guide OL-6155-01 Preface Obtainin g Addi tional Pub lications and Informat ion Opening a T AC Cas e The onlin e T A C Ca se Open T ool ( http://www .cisco.com /tac/caseo pen ) is the fastest way to open P3 a nd P4 cases. (Y ou r network is mi nimall y impaire d or you re quire pr oduct i n ...

  • Cisco Systems 3550 - page 17

    xvii Catalyst 3550 Multilay e r Switch Hardware Insta llation Guide OL-6155-01 Pre face Obtaining Additional Publications and Information • Pack et magazine is the Cisco quarterl y publication that provides th e latest networ king trends, technol ogy breakthr oughs, an d Cisco produ cts an d solutions to hel p indust ry profession als get the mos ...

  • Cisco Systems 3550 - page 18

    xviii Catalyst 3550 Multilay er Switch Hardware Installati on Guide OL-6155-01 Preface Obtainin g Addi tional Pub lications and Informat ion ...

  • Cisco Systems 3550 - page 19

    C HAPTER 1-1 Catalyst 3550 Switch Hardware Installation Guide OL-6155-01 1 Product Overview The Cataly st 3550 f amily of m ultilayer switches—also ref erred to a s the switc hes—are st ackable Ethernet switc hes to which y ou c an conn ect workst ations, Cisco IP Ph ones, and ot her ne twork devices such as serv ers, routers, and othe r switch ...

  • Cisco Systems 3550 - page 20

    1-2 Catalyst 3550 Swi tch Hardware In stallation Guid e OL-6155-01 Chapter 1 P roduct Overv iew Feature s Figur e 1 -2 Catalyst 3550-24, 3 550-24-D C, 3550-FX , 3550-24P WR, and 3550 -48 Switc h Models M O D E Catalyst 3550 S Y S T E M 1 X 2 X 1 5 X 1 6 X R P S S T A T U S U T IL D U P L X S P E E D 1 2 3 4 5 6 7 8 9 10 11 12 1 1 X 2 X 1 5 X 1 6 X ...

  • Cisco Systems 3550 - page 21

    1-3 Catalyst 3550 Switch Hardware Installation Guide OL-6155-01 Chapter 1 Product Overv iew Features T able 1 -1 S witch Featu r es Featur e Descrip tion Hardwa re • 2 o r 10 G igabit Et herne t 10BASE-T/100BASE-TX/1000BASE-T po rts and 2 or 10 GBIC 1 -ba sed Gigabit E therne t slots (Catal yst 35 50-12T and 35 50-12G switch es) • 24 or 48 10BA ...

  • Cisco Systems 3550 - page 22

    1-4 Catalyst 3550 Swi tch Hardware In stallation Guid e OL-6155-01 Chapter 1 P roduct Overv iew Front-Pa nel De scripti on Front-Panel Descript ion The swi tch front p anel incl udes the 10/100 or 10/100/ 1000 Ethe rnet por ts or 100BASE-FX ports, GBIC module slots, and switch LED s as shown in Figu re 1-3 and describe d on the following pages. Not ...

  • Cisco Systems 3550 - page 23

    1-5 Catalyst 3550 Switch Hardware Installation Guide OL-6155-01 Chapter 1 Product Overv iew Front -Panel Descr iption 10/100 an d 10/10 0/1000 Ports The Fast Ethern et (10 /100-Mb ps) and Gigabi t Etherne t (10/1 00/1000- Mbps) po rts use stan dard RJ-45 connec tors an d Et hern et pinou ts w ith in tern al cr ossovers. The m axim um cab le l ength ...

  • Cisco Systems 3550 - page 24

    1-6 Catalyst 3550 Swi tch Hardware In stallation Guid e OL-6155-01 Chapter 1 P roduct Overv iew Front-Pa nel De scripti on GBIC Module Slots Y o u cannot configure speed or duplex mod e on GBIC slots, but for cer tain type s of GBICs, you ca n configure spe ed to not negoti ate ( nonegotiate ) if connec ted to a de vice that does not suppo rt auton ...

  • Cisco Systems 3550 - page 25

    1-7 Catalyst 3550 Switch Hardware Installation Guide OL-6155-01 Chapter 1 Product Overv iew Front -Panel Descr iption RPS LED The RPS LED sho ws the RPS status. Ta b l e 1 - 3 lists the LED c olors and their meanings. For more inform ation about the C isco RPS 300 or t he C isco RPS 675, see th e docum entat ion inc luded with the RPS. Port LEDs an ...

  • Cisco Systems 3550 - page 26

    1-8 Catalyst 3550 Swi tch Hardware In stallation Guid e OL-6155-01 Chapter 1 P roduct Overv iew Front-Pa nel De scripti on SPEED Port spe ed The port oper ating speed: 10, 100, or 10 00 Mbps. LINE PWR 2 Port inlin e power The inline power status: on or off. 1. Not available on Catalyst 3550-24PWR switches 2. Availa ble only o n Catalyst 35 50-24PWR ...

  • Cisco Systems 3550 - page 27

    1-9 Catalyst 3550 Switch Hardware Installation Guide OL-6155-01 Chapter 1 Product Overv iew Front -Panel Descr iption Bandwidth Ut ilization The UTIL mode on the switch shows the current bandwidth i n use b y the swit ch. (See Fi gure 1- 4 to Figure 1-8 .) If all possi ble port LE Ds ar e green, bandwid th utiliz ation is in the 50 to 100 percent r ...

  • Cisco Systems 3550 - page 28

    1-10 Catalyst 3550 Swi tch Hardware In stallation Guid e OL-6155-01 Chapter 1 P roduct Overv iew Rear-Panel Descr iption Figur e 1 -7 Bandwidth Ut ilization f or the Cataly st 3550-48 Figure 1-8 sh o ws the bandwidth utilizatio n percentages displayed by the LEDs on the Catalyst 3550-2 4-FX switch. Figur e 1 -8 Bandwidth Ut ilization f or the Catal ...

  • Cisco Systems 3550 - page 29

    1-11 Catalyst 3550 Switch Hardware Installation Guide OL-6155-01 Chapter 1 Product Overv iew Manageme nt Options AC Power Conn ector For A C-po wered switches, t h e internal power sup ply is an au toranging unit that supports input voltage s between 100 a nd 240 V A C. For the Cataly st 2440-24-D C po wer inf ormation, see Append ix C , “ DC Po ...

  • Cisco Systems 3550 - page 30

    1-12 Catalyst 3550 Swi tch Hardware In stallation Guid e OL-6155-01 Chapter 1 P roduct Overv iew Managem ent Opt ions • Device manager Y o u can use the device m anager, which is in th e swi tch me mory , t o mana ge ind ividual and standa lone switc hes. The device mana ger is a ccessibl e after y ou have run the E xpress Set up pr ogram (see th ...

  • Cisco Systems 3550 - page 31

    C HAPTER 2-1 Catalyst 3550 Switch Hardware Installation Guide OL-6155-01 2 Switch Instal lation This chapte r describes ho w to prepare for installat ion, how to install the switc h, and how to m ake connect ions to it. Read the topics and pe rform the procedu res in the order that the y are presented : • Preparin g for In stallation, p age 2-1 ? ...

  • Cisco Systems 3550 - page 32

    2-2 Catalyst 3550 Swi tch Hardware In stallation Guid e OL-6155-01 Chapter 2 Switch Installation Prepar ing for Inst allat ion War ni n g Installation of t he equipment must comp l y with local and national electrical codes. Statement 1 074 War ni n g Before working on equipment that is connected to power lines, remove jewelry (including rings, nec ...

  • Cisco Systems 3550 - page 33

    2-3 Catalyst 3550 Switch Hardware Installation Guide OL-6155-01 Chapter 2 Switch Inst allation Preparing for Installation War ni n g The Cataly st 3550-24-DC contains no field-replaceable units (FRUs). Do not open the chassis or attempt to remove or replace any compo nent s. For information about obtaining service for this unit, contact your resell ...

  • Cisco Systems 3550 - page 34

    2-4 Catalyst 3550 Swi tch Hardware In stallation Guid e OL-6155-01 Chapter 2 Switch Installation Prepar ing for Inst allat ion Site Requirements When dete rmining wh ere to place the switch , be sure to ob serv e these re quiremen ts: • Operat ing en vironment is within the range s listed in Appe ndix A , “ T echnic al Specifica tions. ” • ...

  • Cisco Systems 3550 - page 35

    2-5 Catalyst 3550 Switch Hardware Installation Guide OL-6155-01 Chapter 2 Switch Inst allation Install ing the Switch – One cable gu ide and one black Phillip s machine scre w for attaching the cable guide to one of the mountin g brackets – One RPS connec tor cover (for wall mount ing) – T wo Phillips pan- head sc rews (for atta ching the RPS ...

  • Cisco Systems 3550 - page 36

    2-6 Catalyst 3550 Swi tch Hardware In stallation Guid e OL-6155-01 Chapter 2 Switch Installation Instal ling the Swi tch Attaching Brackets to the Catalyst 3550-12T and 3550-12G Switches The b racket orie ntatio n and th e bra ckets that you u se depe nd on w hether y ou are attac hing t he brac kets for a 19-in ch or a 24-i nch ra ck. For 19-i nch ...

  • Cisco Systems 3550 - page 37

    2-7 Catalyst 3550 Switch Hardware Installation Guide OL-6155-01 Chapter 2 Switch Inst allation Install ing the Switch Figur e 2-3 At taching Br ack ets for 1 9-Inch Racks, Rear P anel Forw ard Figur e 2-4 At taching Br ack ets for 24-Inc h Racks, Rear P anel F orwa rd Phillips flat-head screws 19" Configuration 51365 Phillips flat-head screws ...

  • Cisco Systems 3550 - page 38

    2-8 Catalyst 3550 Swi tch Hardware In stallation Guid e OL-6155-01 Chapter 2 Switch Installation Instal ling the Swi tch Figur e 2-5 At taching Br ack ets for 1 9-Inch T elco Rac ks Figur e 2-6 At taching Br ack ets for 24-Inc h T elco Rac ks Attaching Brackets to the Catalyst 3550-24, 3550-24-DC, 355 0-24-FX, 3550-24PWR, and 3550-48 Switches The b ...

  • Cisco Systems 3550 - page 39

    2-9 Catalyst 3550 Switch Hardware Installation Guide OL-6155-01 Chapter 2 Switch Inst allation Install ing the Switch Figur e 2-7 At taching Br ack e ts fo r 19-Inc h Racks, Fr ont P anel Forw ard Figur e 2-8 At taching Br ack ets for 24-Inc h Racks, F ront P anel F orwar d MODE SYSTEM 1X 2X 11X 12X RPS ST ATUS UTIL DUPLX SPEED 1 2 3 4 5 6 7 8 9 10 ...

  • Cisco Systems 3550 - page 40

    2-10 Catalyst 3550 Swi tch Hardware In stallation Guid e OL-6155-01 Chapter 2 Switch Installation Instal ling the Swi tch Figur e 2-9 At taching Br ack ets for 1 9-Inch Racks, Rear P anel Forw ard Figur e 2-1 0 At tachi ng Brack ets fo r 24-Inc h Rac ks, Rear P anel Fo r wa rd CONSOLE Phillips flat-head screws 19" Configuration 49809 CONSOLE 2 ...

  • Cisco Systems 3550 - page 41

    2-11 Catalyst 3550 Switch Hardware Installation Guide OL-6155-01 Chapter 2 Switch Inst allation Install ing the Switch Figur e 2-1 1 At tachi ng Brack ets fo r 19-Inc h T elco Rac ks Figur e 2-12 At tachi ng Brack ets fo r 24-Inc h T elco Rac ks 1 2 Catalyst 3550 SERIES 74036 Phillips flat-head screws 19" Configuration 1 2 Catalyst 3550 SERIES ...

  • Cisco Systems 3550 - page 42

    2-12 Catalyst 3550 Swi tch Hardware In stallation Guid e OL-6155-01 Chapter 2 Switch Installation Instal ling the Swi tch Mounting the Switch in a Rack After the brack ets are attached to the switch , use the four supplie d number- 12 Phillips mach ine scre ws to secur e ly attac h the brac kets to the r ack, as sh ow n in Figure 2-13 . Figur e 2-1 ...

  • Cisco Systems 3550 - page 43

    2-13 Catalyst 3550 Switch Hardware Installation Guide OL-6155-01 Chapter 2 Switch Inst allation Install ing the Switch Attaching the Brackets to the Switch Figure 2-15 shows ho w to attach a 19-inch bracket to on e side of th e switch. Follo w th e same steps to attach the s econd bra cket to t he opposit e side. Note On the Catalyst 3550-24 -FX sw ...

  • Cisco Systems 3550 - page 44

    2-14 Catalyst 3550 Swi tch Hardware In stallation Guid e OL-6155-01 Chapter 2 Switch Installation Instal ling the Swi tch Mounting the Switch on a Wall For the best support of the swit ch and cables, mak e su re that the switch is attached secur ely to wall studs or to a firmly atta ched plywood mo unting backboar d. Moun t the swit ch with the fro ...

  • Cisco Systems 3550 - page 45

    2-15 Catalyst 3550 Switch Hardware Installation Guide OL-6155-01 Chapter 2 Switch Inst allation Instal ling the Optiona l Ground Kit Installing the Opt ional Ground Kit For switches t hat req uire a two-h ole lug for gr oundi ng, you can order a kit co ntainin g the groun d lug a nd hardware from Cisco. For t he Cat alyst 3 550-12 G, 3550- 24, and ...

  • Cisco Systems 3550 - page 46

    2-16 Catalyst 3550 Swi tch Hardware In stallation Guid e OL-6155-01 Chapter 2 Switch Installation Powerin g the Switch an d Connectin g Device s Step 6 Using a ra tcheting t orque screwdri ver , torq ue each gr ound-lug screw to 15 lbf-in. (240 ozf-in .) Figur e 2-18 T orquing G r ound-Lug Scr ews on th e Switc h Powering the Switch an d Connecting ...

  • Cisco Systems 3550 - page 47

    2-17 Catalyst 3550 Switch Hardware Installation Guide OL-6155-01 Chapter 2 Switch Inst allation Powering the Switch and Connecting Devices Connectin g a Cisc o RPS Use the cable supplied with the RPS to connect to the switc h rear panel. Connec t the switch and the RPS to the same AC po wer source. Always put the RPS in standby mode whe n you conne ...

  • Cisco Systems 3550 - page 48

    2-18 Catalyst 3550 Swi tch Hardware In stallation Guid e OL-6155-01 Chapter 2 Switch Installation Powerin g the Switch an d Connectin g Device s The swi tch 10/100 an d 10/10 0/100 0 port default setting i s autonegotia te. If th e attac hed device does no t support au tonegotia tion, you can explicitl y set the sp eed and dupl ex paramete rs. Afte ...

  • Cisco Systems 3550 - page 49

    2-19 Catalyst 3550 Switch Hardware Installation Guide OL-6155-01 Chapter 2 Switch Inst allation Powering the Switch and Connecting Devices Cautio n Do not remove the rubbe r plugs from t he fiber-optic po rts or t he ru bber ca ps from t he fiber-optic ca ble until you are read y to connect th e cable. T he plugs and c aps prot ect the f iber-o pti ...

  • Cisco Systems 3550 - page 50

    2-20 Catalyst 3550 Swi tch Hardware In stallation Guid e OL-6155-01 Chapter 2 Switch Installation Powerin g the Switch an d Connectin g Device s ...

  • Cisco Systems 3550 - page 51

    C HAPTER 3-1 Catalyst 3550 Switch Hardware Installation Guide OL-6155-01 3 Troubleshooting This chapter descr ibes these troubleshootin g topics: • Understandi ng POST Results, page 3 -1 • Clearin g the Switc h IP Address an d Configuration , page 3-1 • Diagnosi ng Probl ems, pa ge 3 -2 Understandin g POST Results While the switc h po wers on ...

  • Cisco Systems 3550 - page 52

    3-2 Catalyst 3550 Swi tch Hardware In stallation Guid e OL-6155-01 Chapter 3 Trouble shooting Diagno sing Proble ms The switc h LEDs b egin blinking afte r about 2 s econds. Note If the swit ch is not co nfigured, t he LEDs a re al l gree n. Y ou c an o mit Ste p 2 and run E xpre ss Setup to conf igure the switch. Step 2 Contin ue holding down the ...

  • Cisco Systems 3550 - page 53

    3-3 Catalyst 3550 Switch Hardware Installation Guide OL-6155-01 Chapter 3 Troubleshoot ing Diagnosing Problems Ta b l e 3 - 1 describe s some commo n problem s and their sol utions. T able 3-1 Common Proble m s and Solutio ns Problem Solution System LED is not on, an d the switch does not run POST . • Chec k that the po wer cabl e is connected to ...

  • Cisco Systems 3550 - page 54

    3-4 Catalyst 3550 Swi tch Hardware In stallation Guid e OL-6155-01 Chapter 3 Trouble shooting Diagno sing Proble ms No c onnec tivity • V e rify t hat the d evices at b oth en ds of the lin k ar e co nnec ted an d po wered. • V erify that the autone gotiation settings are the same at both ends. • V erify that y ou are usi ng the appr opriate ...

  • Cisco Systems 3550 - page 55

    A- 1 Catalyst 3550 Multilay er Switch Hardware Installati on Guide OL-6155-01 APPEND IX A Technical Specifications This app endix lists th e switch t echnical sp ecific ations in Ta b l e A - 1 to Ta b l e A - 5 . T able A -1 S witch Envir onmental and Ph ysical Specification s Enviro nmenta l Ranges Operating temper ature 32 to 113 ° F (0 to 45 ? ...

  • Cisco Systems 3550 - page 56

    A- 2 Catalyst 3550 Multilay er Switch Hardware Installati on Guide OL-6155-01 Appendi x A Technical Speci fication s T able A -2 P o wer R equireme nts f or the Cat alyst 3550-1 2T , 3550-12G, 35 50-24, 355 0-24-FX, a nd 3550-48 S witches Power Requ iremen ts A C input voltage Cata lyst 3550 -12T an d 3550-12 G: 100 to 127/2 00 to 240 V A C (autora ...

  • Cisco Systems 3550 - page 57

    A-3 Catalyst 3550 Multilay e r Switch Hardware Insta llation Guide OL-6155-01 Append ix A Technical Spec ification s T able A -5 F iber -P ort Specification s for Ca t alyst 35 50-24-FX S witc hes Fiber -Port Power Levels Optic al transm itter wavelength 1300 nm 1 1. nm = na nom eter s Optical r ecei ver sens itiv ity for 50/125-micr on cabling – ...

  • Cisco Systems 3550 - page 58

    A- 4 Catalyst 3550 Multilay er Switch Hardware Installati on Guide OL-6155-01 Appendi x A Technical Speci fication s ...

  • Cisco Systems 3550 - page 59

    B-1 Catalyst 3550 Multilay e r Switch Hardware Insta llation Guide OL-6155-01 APPEND IX B Connector and Cable Specifications This appe ndix desc ribes the Ca talyst 355 0 switch port s and the ca bles and adapte rs that you use to connec t the switch to other devices. Connector Specific ations These sections describe the connectors used with th e C ...

  • Cisco Systems 3550 - page 60

    B-2 Catalyst 3550 Multilay e r Switch Hardware Insta llation Guide OL-6155-01 Appendi x B Connector a nd Cable Speci ficati ons Connecto r Specificati ons Figur e B-2 1 0 /1 00/1 00 0 Port Pin outs 100BASE-FX Ports The 100 BASE-FX port s use MT -RJ connecto rs, as sh own in Figu re B-3 . The 100BASE-FX ports use 50/125- or 62.5/125-mic ron multimod ...

  • Cisco Systems 3550 - page 61

    B-3 Catalyst 3550 Multilay er Switch Hardware Installati on Guide OL-6155-01 Append ix B Connector and Cab le Specifi cations Cable and Adapter Speci ficati ons Cable and Adapter Specifications These sec tions descr ibe the ca bles and adap ters used with the C atalyst 3 550 switche s. Two Tw isted-Pair Ca ble Pinouts Figure B-4 and Figur e B-5 sho ...

  • Cisco Systems 3550 - page 62

    B-4 Catalyst 3550 Multilay e r Switch Hardware Insta llation Guide OL-6155-01 Appendi x B Connector a nd Cable Speci ficati ons Cable and A dapter Spec ifications Figur e B-7 Four T wisted-P air Cr ossov e r Cable Sc hematic for 1 0/1 0 0 P orts Four Twisted-Pa ir Cable Pinou ts for 1 000BASE-T Ports Figure B-8 and Figur e B-9 sh ow the sche matic ...

  • Cisco Systems 3550 - page 63

    B-5 Catalyst 3550 Multilay er Switch Hardware Installati on Guide OL-6155-01 Append ix B Connector and Cab le Specifi cations Cable and Adapter Speci ficati ons Rollove r Cable a nd Adap ter Pinouts This sec tion describ es ho w to iden tify a r ollov er ca ble (used to connect to the cons ole port) and also describe s the ada pter pinouts. Identif ...

  • Cisco Systems 3550 - page 64

    B-6 Catalyst 3550 Multilay e r Switch Hardware Insta llation Guide OL-6155-01 Appendi x B Connector a nd Cable Speci ficati ons Cable and A dapter Spec ifications Ta b l e B - 3 li sts the pinout s fo r the console port , RJ-45- to-DB- 25 fe male D TE ada pter, and th e conso le dev i ce . The R J - 45 -t o - D B- 2 5 f em a l e D TE a d a p t e r ...

  • Cisco Systems 3550 - page 65

    C-1 Catalyst 3550 Multilay e r Switch Hardware Insta llation Guide OL-6155-01 APPEND IX C DC Power Connections This a ppendix descri bes how to m ake DC p ower connec tions to the Catalyst 3550-2 4-DC switch. See the “ I nstalling the Switch ” sect ion o n page 2 -5 for instructions on installing the switch. Connecting to DC Powe r T o connect ...

  • Cisco Systems 3550 - page 66

    C-2 Catalyst 3550 Multilay e r Switch Hardware Insta llation Guide OL-6155-01 Appendix C DC Power Connections Connecting t o DC Power • 6-gauge co pper gr ound wire (insulat ed or nonins ulate d) • Four leads of 1 8-gauge co pper wir e • W i re-stripp ing tools for stripping 6- a nd 18-gau ge wires Grounding th e Switch War ni n g This equipm ...

  • Cisco Systems 3550 - page 67

    C-3 Catalyst 3550 Multilay er Switch Hardware Installati on Guide OL-6155-01 Append ix C DC Power Connections Connecting to DC Power Step 4 Using a Panduit crimping t ool, crimp the ground l ug to the 6-gaug e wire, as shown in Figure C-2 . Figur e C-2 Crim ping the Gr ound Lug Step 5 Use t he two num ber-10-32 screws to at tach the g round lug an ...

  • Cisco Systems 3550 - page 68

    C-4 Catalyst 3550 Multilay e r Switch Hardware Insta llation Guide OL-6155-01 Appendix C DC Power Connections Connecting t o DC Power Wiring the DC-Inp ut Power So urce War ni n g Only trained and qualif ied personnel should be allowed t o install, replace, or s ervice this equipme nt . Statement 1030 War ni n g Before performing any of the followi ...

  • Cisco Systems 3550 - page 69

    C-5 Catalyst 3550 Multilay er Switch Hardware Installati on Guide OL-6155-01 Append ix C DC Power Connections Connecting to DC Power Step 2 Identify t he positi ve and ne gati ve feed positi ons for the ter minal block connection. T he wiring sequenc e is positi ve to positi ve and ne gati ve to negati ve for both the A and the B feed wir es. The s ...

  • Cisco Systems 3550 - page 70

    C-6 Catalyst 3550 Multilay e r Switch Hardware Insta llation Guide OL-6155-01 Appendix C DC Power Connections Connecting t o DC Power Figur e C-7 Inserting Wires in the T er minal Bloc k Plug Step 5 Use a r atche ting to rque screwdriver to torque the te rmin al bl ock cap tiv e screw (above th e inst alled w ire lead) to 4.5 lb f-in. (72 o zf-in.) ...

  • Cisco Systems 3550 - page 71

    C-7 Catalyst 3550 Multilay er Switch Hardware Installati on Guide OL-6155-01 Append ix C DC Power Connections Connecting to DC Power Figur e C-9 Completed Wir ing of T er minal Bloc k Plug Step 7 Insert t he termin al bloc k plug in the te rmina l block hea der on the sw itch re ar panel , as shown in Figure C-10 . Cautio n Secure the wires comin g ...

  • Cisco Systems 3550 - page 72

    C-8 Catalyst 3550 Multilay e r Switch Hardware Insta llation Guide OL-6155-01 Appendix C DC Power Connections Connecting t o DC Power ...

  • Cisco Systems 3550 - page 73

    D- 1 Catalyst 3550 Multilay e r Switch Hardware Insta llation Guide OL-6155-01 APPEND IX D Configuring the Switch with the CLI-Based Setup Program This ap pendi x provides a com mand-l ine in terface ( CLI)-b ased setup proced ure fo r a stan dal one switc h. Before conne ctin g the switch t o a po wer sourc e, revie w the safe ty warnings i n Cha ...

  • Cisco Systems 3550 - page 74

    D- 2 Catalyst 3550 Multilay e r Switch Hardware Insta llation Guide OL-6155-01 Appendix D Configuring the Switch with the CLI-Based Setup Program Access ing the CLI Through the Console Port Note Whil e in Express Setup mode, the I P addr ess 10.0. 0.1 is activ e until you en ter the write memory comm and. Y ou l ose the T elnet co nnec tio n after ...

  • Cisco Systems 3550 - page 75

    D-3 Catalyst 3550 Multilay er Switch Hardware Installati on Guide OL-6155-01 Append ix D Configuring t he Switch wi th the CLI-Ba sed Set up Progra m Accessi ng the CL I Throug h the Co nsole Port Figur e D-1 Connecting a S witch Console P ort t o a PC Starting the Terminal-Emulation Softwar e Before yo u power on the switch, start the te rminal e ...

  • Cisco Systems 3550 - page 76

    D- 4 Catalyst 3550 Multilay e r Switch Hardware Insta llation Guide OL-6155-01 Appendix D Configuring the Switch with the CLI-Based Setup Program Enterin g the Initial Conf igurati on Informat ion Powering on the Switch Com ple te th ese ste ps t o powe r on th e sw itc h: Step 1 Connect one end of the supp lied AC po w er cord t o the power conne ...

  • Cisco Systems 3550 - page 77

    D-5 Catalyst 3550 Multilay er Switch Hardware Installati on Guide OL-6155-01 Append ix D Configuring t he Switch wi th the CLI-Ba sed Set up Progra m Entering the Initial Configuration Information Completing the Setup Program Foll ow these steps to complete the setup pro gram and to create an initial co nfig uration for the switc h: Step 1 Ente r Y ...

  • Cisco Systems 3550 - page 78

    D- 6 Catalyst 3550 Multilay e r Switch Hardware Insta llation Guide OL-6155-01 Appendix D Configuring the Switch with the CLI-Based Setup Program Enterin g the Initial Conf igurati on Informat ion Step 9 Ente r Y to conf igure the switch as the clu ster command s witch. E n ter N to con figure it as a memb er swit ch or as a s tandalone switch. If ...

  • Cisco Systems 3550 - page 79

    D-7 Catalyst 3550 Multilay er Switch Hardware Installati on Guide OL-6155-01 Append ix D Configuring t he Switch wi th the CLI-Ba sed Set up Progra m Entering the Initial Configuration Information After y ou comple te the setup program , the swit ch can run th e defa ult conf iguration that you creat ed. If you want t o ch ange this configu ration ...

  • Cisco Systems 3550 - page 80

    D- 8 Catalyst 3550 Multilay e r Switch Hardware Insta llation Guide OL-6155-01 Appendix D Configuring the Switch with the CLI-Based Setup Program Enterin g the Initial Conf igurati on Informat ion ...

  • Cisco Systems 3550 - page 81

    IN-1 Catalyst 3550 Multilay er Switch Hardware Installati on Guide OL-6155-01 INDEX Numerics 10/100/10 00 ports cable l ength s 2-5 connec ting t o 3-17 describe d 2-5 pinouts B- 2 recomm ende d ca bles 3-17 10/100 por ts cable l ength s 2-5 connec ting t o 3-17 describe d 2-5 inline power 2-5 pinouts B- 1 recomm ende d ca bles 3-17 1000BASE -LX/L ...

  • Cisco Systems 3550 - page 82

    Index IN-2 Catalyst 3550 Multilayer Switch Hardware Installat ion Guide OL-6155-01 configuratio n by using the C LI D-4 comp leting the setup progra m D-5 starting the terminal em ulation softwar e D-3 connect ing to 10/ 100/100 0 ports 3-17 to 10 /10 0 por ts 3-17 to 100B ASE-FX por ts 3-18 to AC power 3-16 to DC power C-1 t o C-7 to RPS 3-17 to t ...

  • Cisco Systems 3550 - page 83

    Inde x IN-3 Catalyst 3550 Multilay er Switch Hardware Installati on Guide OL-6155-01 H HP OpenView 2-12 humidity, r elative A-1 I IE2100 2-12 inline pow er connec ting to Cisco Aironet a ccess p oint 3-18 connec ting to Cisco IP Phone 3-18 describe d 2-5 LED 2-8 installati on rack-m ountin g 3-5 to 3-12 site requir ements 3-4 table or shel f-moun t ...

  • Cisco Systems 3550 - page 84

    Index IN-4 Catalyst 3550 Multilayer Switch Hardware Installat ion Guide OL-6155-01 P packin g list 3-4 perform ance p roblem s, sol ving 4-2 pinouts 10/100/10 00 ports B-2 10/100 por ts B-1 console port B-6 crossover c able B-3, B-4 RJ-45-to -DB-2 5 termina l adapter B-6 RJ-45-to -DB-9 term inal adap ter B-5 rollover cab le B-5 straight-t hrou gh c ...

  • Cisco Systems 3550 - page 85

    Inde x IN-5 Catalyst 3550 Multilay er Switch Hardware Installati on Guide OL-6155-01 slots See ports SmartPort macr os 2-12 SNMP netwo rk manageme nt platf orms 2-12 soft ware mana gement o ption s 2-11 specifi cations A-1 straight -throu gh cable See cab les B-3 Sun Net Mana ger 2-12 system LED 2-6 T tabl e-mounti ng 3-14 techni cal assist ance xv ...

  • Cisco Systems 3550 - page 86

    Index IN-6 Catalyst 3550 Multilayer Switch Hardware Installat ion Guide OL-6155-01 ...

Manufacturer Cisco Systems Category Switch

Documents that we receive from a manufacturer of a Cisco Systems 3550 can be divided into several groups. They are, among others:
- Cisco Systems technical drawings
- 3550 manuals
- Cisco Systems product data sheets
- information booklets
- or energy labels Cisco Systems 3550
All of them are important, but the most important information from the point of view of use of the device are in the user manual Cisco Systems 3550.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Cisco Systems 3550, service manual, brief instructions and user manuals Cisco Systems 3550. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Cisco Systems 3550.

Similar manuals

A complete manual for the device Cisco Systems 3550, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Cisco Systems 3550 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Cisco Systems 3550.

A complete Cisco Systems manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Cisco Systems 3550 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Cisco Systems 3550, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Cisco Systems 3550, that we can find in the current document
3. Tips how to use the basic functions of the device Cisco Systems 3550 - which should help us in our first steps of using Cisco Systems 3550
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Cisco Systems 3550
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Cisco Systems 3550 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Cisco Systems 3550?

Use the form below

If you did not solve your problem by using a manual Cisco Systems 3550, ask a question using the form below. If a user had a similar problem with Cisco Systems 3550 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)