English dropdown-ico

Manual Pelco FR8301

24 pages 0.24 mb
Download

Go to site of 24

Summary
  • Pelco FR8301 - page 1

    ® ® INST ALLA TION FT8301/FR8301 Fiber T ransmitter and Receiver Single-Channel Digitally Encoded V ideo C1641M-A (3/05) ...

  • Pelco FR8301 - page 2

    2 C1641M-A (3/05) Contents Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Regulatory Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Product Overview . . . . . . . . . . . . . . . . . ...

  • Pelco FR8301 - page 3

    C1641M-A (3/05) 3 Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install nea ...

  • Pelco FR8301 - page 4

    4 C1641M-A (3/05) CAUTION: These servicing instructions are for use by qualifi ed service personnel only. To reduce the risk of electric shock do not perform any servicing other that contained in the operating instructions unless you are qualifi ed to do so. The product and/or manual may bear the following marks: This symbol indicates that danger ...

  • Pelco FR8301 - page 5

    C1641M-A (3/05) 5 Regulatory Notices This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RADIO AND TELEVISION INTERFERENCE Thi ...

  • Pelco FR8301 - page 6

    6 C1641M-A (3/05) Product Overview DESCRIPTION The FT8301/FR8301 fi ber transmitter and receiver provide the ability to transmit one composite video channel over one optical fi ber (refer to Figure 1). Figure 1. Single-Channel Video FT8301 T ransmitter and FR8301 Receiver Features of the FT8301/FR8301 fi ber optic transmission system include the ...

  • Pelco FR8301 - page 7

    C1641M-A (3/05) 7 MODELS The FT8301/FR8301 fi ber transmitter and receiver consist of the following series of models: Multimode Models: FT8301MST Single-channel fiber optic video transmitter; multimode, ST connector; transmission distance up to 2 km FR8301MSTR Single-channel fiber optic video receiver; multimode, ST connector; transmission dista ...

  • Pelco FR8301 - page 8

    8 C1641M-A (3/05) FRONT PANEL The front panel of the FT8301 transmitter and the FR8301 receiver provides LED indicators that allow you to monitor signal status and operating power. The following sections provide a view of the front panel of the FT8301 transmitter and the FR8301 receiver. FRONT PANEL - FT8301 T RANSMITTER Figure 2 illustrates the fr ...

  • Pelco FR8301 - page 9

    C1641M-A (3/05) 9 FRONT PANEL - FR8301 RECEIVER Figure 3 illustrates the front panel of the FR8301 receiver. Figure 3. Front Panel of FR8301 Receiver  VIDEO PRESENT LED  CARRIER DETECT LED  POWER LED (Pelco badge) For detailed information about the front-panel indicators, refer to the T roubleshooting section.    ...

  • Pelco FR8301 - page 10

    10 C1641M-A (3/05) REAR PANEL Connections to the FT8301 transmitter and the FR8301 receiver are made to the rear panel of the modules. The following sections provide a view of the rear panel of the FT8301 transmitter and the FR8301 receiver . REAR PANEL - FT8301 T RANSMITTER Figure 4 illustrates the rear panel of the FT8301 transmitter. Figure 4. R ...

  • Pelco FR8301 - page 11

    C1641M-A (3/05) 11 REAR PANEL - FR8301 RECEIVER Figure 5 illustrates the rear panel of the FR8301 receiver. Figure 5. Rear Panel of FR8301 Receiver  RACK POWER/ALARM CONNECTOR, 4-pin connector for power/alarm connection of rack-mounted module  ST ANDALONE POWER CONNECTOR, 2-pin connector for power connection of standalone module; removable ma ...

  • Pelco FR8301 - page 12

    12 C1641M-A (3/05) Installation PACKAGE CONTENTS The following items are supplied: • With the FT8301 transmitter: 1 Regulated switching power supply with four plug adapters (North American, Australian, U.K., and European confi gurations); 100-240 VAC input, 12 VDC output 1 FT8301/FR8301 Fiber T ransmitter and Receiver Installation manual (this m ...

  • Pelco FR8301 - page 13

    C1641M-A (3/05) 13 MOUNTING THE FR8301 RECEIVER The following sections provide information about mounting the FR8301 receiver into a rack or onto a wall. Mounting the FR8301 Receiver into a Rack The FR8301 receiver can be installed into an RK5000 Series rack mount chassis, which can be mounted into an industry-standard 19-inch (48.26 cm) equipment ...

  • Pelco FR8301 - page 14

    14 C1641M-A (3/05) Mounting the FR8301 Receiver Using the Wall Clip NOTE: Before mounting the FR8301 receiver to a wall, ensure that there is adequate space at both ends for viewing the front-panel LEDs and for making the various rear - panel cable connections. To attach the FR8301 receiver to a wall using the supplied wall clip, refer to Figure 7 ...

  • Pelco FR8301 - page 15

    C1641M-A (3/05) 15 CONNECTIONS Connections to the FT8301 transmitter and the FR8301 receiver are made on the rear panel of the modules and consist of the following: • Power connection NOTE: A 12 VDC or 24 VAC power supply can be used to power the transmitter/receiver when used as a standalone module. A 12 VDC power supply is provided. If a 24 V A ...

  • Pelco FR8301 - page 16

    16 C1641M-A (3/05) CONNECTING THE FR8301 RECEIVER Figure 9 illustrates FR8301 receiver connections. Figure 9. FR8301 Receiver Connections POWER/ALARM CONNECTION FOR RACK-MOUNTED MODULE* FIBER OPTIC CABLE COAXIAL CABLE † POWER CONNECTION FOR STANDALONE MODULE† *REFER TO THE RK5000PS-3U/RK5000-3U FIBER RACK MOUNT CHASSIS INSTALLATION MANUAL FOR I ...

  • Pelco FR8301 - page 17

    C1641M-A (3/05) 17 T roubleshooting LED indicators on the front panel of the FT8301 transmitter/FR8301receiver (refer to Figure 2 and to Figure 3, respectively) allow you to monitor signal status and operating power . T able A provides information about the front-panel indicators and associated troubleshooting guidelines. T able A. T roubleshooting ...

  • Pelco FR8301 - page 18

    18 C1641M-A (3/05) Video Present LED Green Incoming video signal is present on the channel. – No action required. Not lit on transmitter Incoming video signal is not present on the channel. Video source is not powered on. Check power connection to the video source. Video source is not connected to the transmitter . Check BNC connections. Coaxial ...

  • Pelco FR8301 - page 19

    C1641M-A (3/05) 19 Carrier Detect LED (Receiver Only) Green The optical signal is being received from the transmitter . – No action required. Red The optical signal is not being received from the transmitter . T ransmitter is not powered on. Check power connections. Replace power supply if necessary . Fiber optic cable is not connected. Check fi ...

  • Pelco FR8301 - page 20

    20 C1641M-A (3/05) Specifications VIDEO Number of Channels 1 Modulation T ype Pulse code modulation, 8-bit resolution Video Input 1.0 Vp-p, 75 ohms; NTSC, PAL, and SECAM Bandwidth 6.5 MHz Gain Unity Differential Gain <2% Differential Phase <1° T ilt <1% Signal-to-Noise Ratio >60 dB (CCIR weighted) GENERAL Operating T emperature -40° ...

  • Pelco FR8301 - page 21

    C1641M-A (3/05) 21 OPTICAL POWER BUDGET , TRANSMISSION DISTANCE, AND LASER CLASS 1 LIMIT Fiber Wavelength Optical Power Budget Maximum T ransmission Distance Laser Class 1 Limit* Multimode (62.5/125 µm) 850 nm 15 dB † 2 km (1.2 mi) †† <0.78 mW 1310 nm 20 dB † 6 km (3.7 mi) †† <15.6 mW Single-mode (9/125 µm) 1310 nm 20 dB 30 km ( ...

  • Pelco FR8301 - page 22

    ...

  • Pelco FR8301 - page 23

    PRODUCT WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment. Exceptions to this warranty are as noted below: • Five years on FT/FR8000 Series fiber optic products and the following fixed camera model ...

  • Pelco FR8301 - page 24

    ® United States | Canada | United Kingdom | The Netherlands | Singapore | Spain | Scandinavia | France | Middle East Worldwide Headquarters 3500 Pelco W ay Clovis, California 93612 USA USA & Canada T el: 800/289-9100 Fax: 800/289-9150 International T el: 1-559/292-1981 Fax: 1-559/348-1120 www .pelco.com ISO 9001 ...

Manufacturer Pelco Category Satellite Radio

Documents that we receive from a manufacturer of a Pelco FR8301 can be divided into several groups. They are, among others:
- Pelco technical drawings
- FR8301 manuals
- Pelco product data sheets
- information booklets
- or energy labels Pelco FR8301
All of them are important, but the most important information from the point of view of use of the device are in the user manual Pelco FR8301.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Pelco FR8301, service manual, brief instructions and user manuals Pelco FR8301. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Pelco FR8301.

Similar manuals

A complete manual for the device Pelco FR8301, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Pelco FR8301 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Pelco FR8301.

A complete Pelco manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Pelco FR8301 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Pelco FR8301, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Pelco FR8301, that we can find in the current document
3. Tips how to use the basic functions of the device Pelco FR8301 - which should help us in our first steps of using Pelco FR8301
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Pelco FR8301
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Pelco FR8301 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Pelco FR8301?

Use the form below

If you did not solve your problem by using a manual Pelco FR8301, ask a question using the form below. If a user had a similar problem with Pelco FR8301 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)