Manual Sharp AL-1451

52 pages 1 mb
Download

Go to site of 52

Summary
  • Sharp AL-1451 - page 1

    Digital Laser Copier/Printer Operation Manual MODEL AL-1451 ...

  • Sharp AL-1451 - page 2

    FOR Y OUR PR O TECTION... T o aid in repor ting this compact copier in case of loss or theft, please record below the model number and serial number located on the bac k of the unit. W e also suggest you record all the inf or mation listed and retain f or future ref erence. MODEL NUMBER SERIAL NUMBER D A TE OF PURCHASE Dealer Address City State Zip ...

  • Sharp AL-1451 - page 3

    1 CONTENTS 1 GETTING ST AR TED INTRODUCTION 3 CA UTIONS 3 MAIN FEA TURES 4 P AR T NAMES 6 OPERA TION P ANEL 7 2 INSTALLATION COPIER INST ALLA TION 8 CA UTIONS ON HANDLING 9 CHECKING P ACKED COMPONENTS AND A CCESSORIES 10 UNP A CKING 10 REMO VING PR O TECTIVE P ACKING MA TERIALS 11 INST ALLING THE TD CAR TRIDGE 12 LOADING COPY P APER (installing the ...

  • Sharp AL-1451 - page 4

    2 5 SUPPLIES AND USER MAINTENANCE TD CAR TRIDGE REPLACEMENT 27 DR UM CARTRIDGE REPLA CEMENT 28 USER MAINTENANCE 30 – Cabinet 30 – Original table and original cov er 30 – T ransf er charger 31 – When copier is not in use 32 6 COPIER TROUBLE? MISFEED REMO V AL 33 – A Misf eed in the paper f eed area 34 – B Misf eed in the fusing area 34 ? ...

  • Sharp AL-1451 - page 5

    3 1 Getting star ted 1 GETTING ST AR TED This chapter provides basic inf or mation f or using the copier . INTR ODUCTION This copier has been designed to provide intuitiv e operating ease while requiring a minimum amount of space. T o get full use of all copier f eatures, be sure to f amiliarize yourself with this manual and the copier . F or quick ...

  • Sharp AL-1451 - page 6

    4 1 Getting star ted CA UTIONS ● Place the copier on a firm, lev el surf ace. ● Do not install the copier in a humid or dusty location. ● When the copier is not used f or long time, f or example f or consecutiv e holidays, tur n the po wer s witch off and remove the po wer cord from the outlet. ● When moving the copier , be sure to tur n th ...

  • Sharp AL-1451 - page 7

    5 1 Getting star ted MAIN FEA TURES Substantial copying functions ● Zoom cop ying from 50% to 200% in 1% increments can be performed. ● Continuous cop ying of maximum 99 sheets can also be perf or med. ● A utomatic document feeding through the single pass f eeder (SPF) can be performed. ● T oner sav e mode reduces toner consumption by appro ...

  • Sharp AL-1451 - page 8

    6 1 Getting star ted P AR T NAMES SPF e xit area Original guides F eeding roller cover Document f eeder tray T ransf er charger TD car tridge lock release button TD car tridge Drum car tridge Drum car tridge handle Fusing unit release le ver Charger cleaner Original table Operation panel P aper tray F ront cov er Side cov er open button Original co ...

  • Sharp AL-1451 - page 9

    7 1 Getting star ted OPERA TION P ANEL Exposure mode selector key and indicators Use to sequentially select the e xposure modes: A UTO , MANU AL or PHO T O. Selected mode is shown b y a lit indicator . (p . 20) Light and dark keys and e xposure indicators Use to adjust the MANU AL or PHO T O e xposure lev el. Selected e xposure lev el is shown b y ...

  • Sharp AL-1451 - page 10

    8 2 Installation 2 INST ALLA TION F ollow the installation procedure below to use the copier properly . COPIER INST ALLA TION Improper installation ma y damage the copier . Please note the follo wing during initial installation and whenev er the copier is moved. If the copier is mov ed from a cool place to a war m place, condensation ma y f or m in ...

  • Sharp AL-1451 - page 11

    9 2 Installation Be sure to allow the required space ar ound the machine f or ser vicing and pr oper ventilation. A small amount of ozone is produced within the copier during operation. The emission le vel is insufficient to cause an y health hazard. NO TE: The present recommended long ter m e xposure limit f or ozone is 0.1 ppm (0.2 m g /m 3 ) cal ...

  • Sharp AL-1451 - page 12

    10 2 Installation CHECKING P A CKED COMPONENTS AND A CCESSORIES Open the car ton and check if the f ollowing components and accessories are included. Copier P ower cord TD car tridge Drum car tridge (installed in copier) Operation manual Printer dr iv er (CD-ROM) Interf ace cable (IBM PC/A T or compatible computer) ● If anything is not included o ...

  • Sharp AL-1451 - page 13

    11 2 Installation REMO VING PR O TECTIVE P A CKING MA TERIALS 1 Remov e all pieces of tape shown in the illustration belo w . Then open the or iginal cov er and remov e protectiv e mater ials , and . 2 Use a coin (or suitable object) to remo ve the scre w . Store the screw in the paper tr ay because it will be used if the copier has to be mov ed. ( ...

  • Sharp AL-1451 - page 14

    12 2 Installation INST ALLING THE TD CAR TRIDGE 1 Open the side cov er while pressing the side cov er open button. 2 Remov e the CA UTION tape from the front cov er and remove the tw o protective pins from the fusing unit by pulling the strings upward one at a time . Protective pins CAUTION tape 3 Push gently on both sides of the front cov er to op ...

  • Sharp AL-1451 - page 15

    13 2 Installation INST ALLING THE TD CARTRIDGE 5 Gently inser t the TD car tridge until it locks in place. 6 Close the front cov er and then the side cov er by pressing the round projections near the side cov er open button. When closing the cov ers, be sure to close the front cov er securely and then close the side cov er . If the cov ers are clos ...

  • Sharp AL-1451 - page 16

    14 2 Installation LO ADING COPY P APER 2 Remov e the pressure plate lock. Rotate the pressure plate lock in the direction of the arrow to remov e it while pressing down the pressure plate of the paper tr ay . 3 Store the pressure plate lock which has been remo v ed in step 2 and the screw which has been remov ed when unpac king (see page 11, step 2 ...

  • Sharp AL-1451 - page 17

    15 2 Installation LO ADING COPY P APER 6 Gently push the paper tra y back into the copier . After loading cop y paper , to cancel the b linking “ P ” without restar ting copying, press the clear ( ) ke y . The “ P ” in the display will go out and the ready ( ) indicator will light up . PO WER T O COPIER 1 Ensure that the power s witch of th ...

  • Sharp AL-1451 - page 18

    16 2 Installation PO WER ON T ur n the po wer s witch on the left side of the copier to the “ ON ” position. The ready ( ) indicator will light up and other indicators which show the initial settings of the operation panel will also light up to indicate the ready condition. F or the initial settings, see the “ Initial settings of operation pa ...

  • Sharp AL-1451 - page 19

    17 3 Making copies 3 MAKING COPIES This chapter describes basic copying functions and some other cop ying functions using the manual b ypass. P APER F or best results, use only paper recommended by SHARP . T ype of paper T ype of media Size W eight f eeding P aper tr ay Standard paper Letter (8-1/2" x 11") 15 lbs. to 21 lbs. Legal (8-1/2& ...

  • Sharp AL-1451 - page 20

    18 3 Making copies NORMAL COPYING This copier has two document input stations - a single pass f eeder (SPF) for automatic document f eeding and an or iginal tab le f or manual handling of documents. The SPF is designed to hold up to 30 originals measuring from 5-1/2" x 8-1/2" to 8-1/2" x 14" and weighing from 14 to 23 lbs. 1 Ens ...

  • Sharp AL-1451 - page 21

    19 3 Making copies NORMAL COPYING ZOOM Tens digit Unit digit B. When using the original table: (1) Open the original cov er . (2) Place an original f ace down on the or iginal tab le. Align it with the or iginal scale and the centering ( ) mark. Close the original cov er . mark Original scale When cop ying a book or an original which has been folde ...

  • Sharp AL-1451 - page 22

    20 3 Making copies NORMAL COPYING 5 Press the print ( ) ke y . ● T o displa y the number of copies made in a continuous run, press the left cop y quantity ke y . ● T o stop cop ying in the middle of a run, press the clear ( ) k ey . Copying will stop and the number in the displa y will be reset to “ 0 ” . Stream feeding mode The stream f ee ...

  • Sharp AL-1451 - page 23

    21 3 Making copies 3 Use the light ( ) and dar k ( ) k eys to adjust the e xposure le vel. If e xposure lev el 2 is selected, the two left-handmost indicators f or that le vel will light up simultaneously . Also, if le v el 4 is selected, the two r ight-handmost indicators f or that lev el will light up simultaneously . 4 Set the number of copies u ...

  • Sharp AL-1451 - page 24

    22 3 Making copies REDUCTION/ENLARGEMENT/ZOOM 3 Set the number of copies using the cop y quantity ( , ) keys and press the print ( ) k ey . BYP ASS FEED (special paper) The single-sheet manual b ypass can be used to feed standard paper , transparency film, labels , and other special pur pose papers measuring from 3-1/2" x 5-1/2" to 8-1/2& ...

  • Sharp AL-1451 - page 25

    23 3 Making copies TW O-SIDED COPYING T wo-sided cop ying can be made on this copier using the manual b ypass. Example: The fo llowing two originals will be copied onto two sides of copy paper . F ace up First original Second original F ace up or face do wn F ace down 1 Place the first original on the or iginal tab le and make a cop y . The first c ...

  • Sharp AL-1451 - page 26

    24 4 Special functions SPECIAL FUNCTIONS DESCRIPTION OF SPECIAL FUNCTIONS This chapter describes the special functions of this copier . Use these functions as needed. T oner save mode (page 24) Reduces toner consumption by appro ximately 10%. P ower sa ve modes (page 25) The copier has two pow er sav e modes of operation: preheat mode and auto powe ...

  • Sharp AL-1451 - page 27

    25 4 Special functions T ONER SA VE MODE 2 Press and hold down the e xposure mode selector ke y for appro ximately 5 seconds . The manual ( ) indicator will go out and the photo ( ) indicator will begin to blink. The exposure indicator mark ed “ 5 ” will light up , indicating the standard toner mode is activ e. 3 T o enter the toner sa ve mode, ...

  • Sharp AL-1451 - page 28

    26 4 Special functions USER PROGRAMS 3 Press the print ( ) ke y . The entered program number will be steadily lit and the currently selected parameter number f or the program will blink on the right side of the displa y . 4 Select the desired parameter using the right cop y quantity ( ) ke y . The entered parameter number will b link on the right o ...

  • Sharp AL-1451 - page 29

    27 5 Supplies and user maintenance 5 SUPPLIES AND USER MAINTENANCE This chapter describes how to replace the TD car tr idge and the drum car tr idge . Be sure to use only genuine SHARP par ts and supplies . TD CAR TRIDGE REPLA CEMENT The TD car tridge replacement required ( ) indicator will light up when toner is needed. For more inf or mation on p ...

  • Sharp AL-1451 - page 30

    28 5 Supplies and user maintenance TD CARTRIDGE REPLA CEMENT 3 Install a new TD car tr idge. T o install the new car tridge, see page 12, INST ALLING THE TD CAR TRIDGE . 4 Close the front cov er and then the side cov er by pressing the round projections near the side cov er open button. The indicator will go out and the ready ( ) indicator will lig ...

  • Sharp AL-1451 - page 31

    29 5 Supplies and user maintenance DRUM CAR TRIDGE REPLA CEMENT 4 Remov e the new drum car tridge from the protective bag and remov e the protective cov er from the car tridge. Then gently install the ne w dr um car tridge. Do not touch the surf ace of the drum (green por tion) of the car tridge. Doing so ma y cause smudges on the copies. 5 Gently ...

  • Sharp AL-1451 - page 32

    30 5 Supplies and user maintenance USER MAINTENANCE Proper care is essential in order to get clean, shar p copies. Be sure to take a f ew min utes to regularly clean the copier . Bef ore cleaning, be sure to tur n the power s witch off and remov e the power cord from the outlet. Do not use thinner , benzene or other v olatile cleaning agents. Doing ...

  • Sharp AL-1451 - page 33

    31 5 Supplies and user maintenance USER MAINTENANCE T ransfer c harg er If copies star t becoming streaky or blotch y , the transf er charger may be dir ty . Clean the charger using the follo wing procedure. 1 T ur n the po wer s witch off. 2 Open the side cov er while pressing the side cov er open button. 3 T ake the charger cleaner out b y holdin ...

  • Sharp AL-1451 - page 34

    32 5 Supplies and user maintenance When copier is not in use T o prev ent entr y of dust and f oreign matter , store the copier as follo ws. 1 Remov e the power cord and secure the copier using tape (f our locations). USER MAINTENANCE ...

  • Sharp AL-1451 - page 35

    33 6 Copier trouble? 6 COPIER TR OUBLE? This chapter describes misfeed remov al and troubleshooting. MISFEED REMO V AL When the misfeed ( ) indicator b links or b links in the display , the copier will stop because of a misfeed. If a misf eed occurs when using the SPF , a number ma y appear in the display after a min us sign. This indicates the num ...

  • Sharp AL-1451 - page 36

    34 6 Copier trouble? MISFEED REMO V AL A Misfeed in the paper feed area 1 Gently remov e the misf ed paper from the paper feed area as sho wn in the illustration. When b links in the display and the misf ed paper is not seen from the paper feed area, pull out the paper tra y and remov e the misf ed paper . If the paper cannot be remov ed, proceed t ...

  • Sharp AL-1451 - page 37

    35 6 Copier trouble? MISFEED REMO V AL ● Do not touch the surf ace of the drum (green por tion) of the dr um cartr idge when removing the misf ed paper . Doing so ma y cause smudges on copies. ● Do not remov e the misf ed paper from abov e the fusing unit. Unfixed toner on the paper ma y stain the paper transpor t area, resulting in smudges on ...

  • Sharp AL-1451 - page 38

    36 6 Copier trouble? 3 Rotate the f eeding roller in the direction of the arrow and gently remov e the misf ed paper from the e xit area. F eeding roller 4 Raise the fusing unit release lev er , close the front cov er and then close the side cov er b y pressing the round projections near the side cov er open button. The misfeed ( ) indicator will g ...

  • Sharp AL-1451 - page 39

    37 6 Copier trouble? MISFEED REMO V AL (B) Open the original cov er and rotate the roller rotating knob to remov e the misfed original from the e xit area. If the misfed original cannot be easily remov ed, proceed to (C) under the feeding roller without pulling the original forcib ly . Roller rotating knob (C) Open the or iginal cov er and rotate t ...

  • Sharp AL-1451 - page 40

    38 6 Copier trouble? TR OUBLESHOO TING If any prob lem occurs, chec k the list below bef ore contacting our T echnical Assistance Depar tment. See page: 15 16 – – 18 24 24 40 20 30 20 Solution Copier does not operate. Blank copies Copier plugged in? Prob lem Possib le cause Plug the copier into a grounded outlet. P ow er switch on? T ur n the p ...

  • Sharp AL-1451 - page 41

    39 6 Copier trouble? ST A TUS INDICA T ORS When the f ollowing indicators light up or blink on the oper ation panel or the follo wing alphanumer ic codes appear in the displa y , solve the prob lem immediately ref erring to both the table below and the relev ant page. An original misfeed has occurred in the SPF . Remov e the misfed originals ref er ...

  • Sharp AL-1451 - page 42

    40 6 Copier trouble? A UT OMA TIC EXPOSURE ADJUSTMENT The automatic exposure le vel can be adjusted to suit y our copying needs. This lev el is set f or cop ying from the or iginal tab le and cop ying from the SPF respectively . 1 When adjusting the automatic e xposure lev el f or copying from the SPF , place an original in the document feeder tr a ...

  • Sharp AL-1451 - page 43

    41 7 Appendix 7 APPENDIX SPECIFICA TIONS T yp e Digital laser copier/printer , desk-top type Copy system Dr y , electrostatic transfer Originals Sheets, bound documents A utomatic original Up to 30 sheets f eed (SPF) Original siz e Max. 10" x 14" (Max. 8-1/2" x 14" for SPF) Cop y sizes 8-1/2" x 14" to 3-1/2" x 5-1 ...

  • Sharp AL-1451 - page 44

    42 7 Appendix Memor y 6 MB P ower supply A C 120V (±10%), 60 Hz (±2%) P ower consumption 1,000 W Ov erall dimensions 23.9" (W) x 18.8" (D) (607 mm (W) x 477 mm (D)) W eight 47.4 lbs. (21.5 k g ) (Appro ximately) TD and drum car tr idges included Copier dimensions 20.4" (W) x 18.8" (D) x 15.0" (H) (518 mm (W) x 477 mm (D) ...

  • Sharp AL-1451 - page 45

    43 7 Appendix SUPPL Y P AR T NUMBERS AND ST ORA GE When ordering supplies, please use the correct par t numbers as listed below . Be sure to use only genuine SHARP par ts and supplies . F or best copying results , be sure to use only SHARP Genuine Supplies which are designed, engineered, and tested to maximize the lif e and performance of SHARP cop ...

  • Sharp AL-1451 - page 46

    44 7 Appendix MO VING INSTR UCTIONS When moving this copier , follo w the procedure below . When moving this copier , be sure to remov e the TD car tr idge in adv ance. 1 T ur n the po wer s witch off and disconnect the power cord. 2 Open the side cov er while pressing the side cove r open button. Push gently on both sides of the front cov er to op ...

  • Sharp AL-1451 - page 47

    INDEX A A uto clear . . . . . . . . . . . . . . . . . . . . 24, 25 A utomatic e xposure adjustment . . . . . . 40 A uto power shut-off mode . . . . . . . . 24, 25 C Cautions . . . . . . . . . . . . . . . . . . . . . . . . . 3 Cautions on handling . . . . . . . . . . . . . . . . 9 Charger cleaner . . . . . . . . . . . . . . . . . . . 31 Copier troub ...

  • Sharp AL-1451 - page 48

    P P ack ed components . . . . . . . . . . . . . . . 10 P aper – loading . . . . . . . . . . . . . . . . . . . . . . . . 13 – special . . . . . . . . . . . . . . . . . . . . . . . . 17 – specifications . . . . . . . . . . . . . . . . . . . 17 P aper f eed area . . . . . . . . . . . . . . . . . . . 34 P aper output tr a y . . . . . . . . . . . ...

  • Sharp AL-1451 - page 49

    47 7 Appendix MEMO ...

  • Sharp AL-1451 - page 50

    48 7 Appendix MEMO ...

  • Sharp AL-1451 - page 51

    For users in the USA This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. WARNING: FCC Regulations state that any unauthorized ...

  • Sharp AL-1451 - page 52

    PRINTED IN CHINA 2001J KS TINSE0677QSZZ SHARP ELECTRONICS CORPORATION Sharp Plaza, Mahwah, New Jersey 07430-2135. www.sharp-usa.com SHARP ELECTRONICS OF CANADA LTD. 335 Britannia Road East, Mississauga, Ontario, L4Z 1W9 SHARP CORPORATION ...

Manufacturer Sharp Category Copier

Documents that we receive from a manufacturer of a Sharp AL-1451 can be divided into several groups. They are, among others:
- Sharp technical drawings
- AL-1451 manuals
- Sharp product data sheets
- information booklets
- or energy labels Sharp AL-1451
All of them are important, but the most important information from the point of view of use of the device are in the user manual Sharp AL-1451.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Sharp AL-1451, service manual, brief instructions and user manuals Sharp AL-1451. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Sharp AL-1451.

Similar manuals

A complete manual for the device Sharp AL-1451, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Sharp AL-1451 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Sharp AL-1451.

A complete Sharp manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Sharp AL-1451 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Sharp AL-1451, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Sharp AL-1451, that we can find in the current document
3. Tips how to use the basic functions of the device Sharp AL-1451 - which should help us in our first steps of using Sharp AL-1451
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Sharp AL-1451
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Sharp AL-1451 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Sharp AL-1451?

Use the form below

If you did not solve your problem by using a manual Sharp AL-1451, ask a question using the form below. If a user had a similar problem with Sharp AL-1451 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)