-
Canon imageFormula DR-M160II - page 1
User Manual • Please re ad this manual befor e operating this scanner . • After you finish r eading this manual, store it in a sa fe place for fu ture r eference. ...
-
Canon imageFormula DR-M160II - page 2
2 FCC REGULATIONS (For 120 V model) Document Scanner, Model M111092 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditi ons: (1) This device may not cause harmful interference, and (2) this dev ice must accept any in terference received, including interference t hat may cause undesired operation. No ...
-
Canon imageFormula DR-M160II - page 3
3 Für EMVG Dieses Produkt ist zum Gebrauch im Wohnbereich, Geschäfts-und Gewerbebereich sowie in Kleinbetrieben vorgesehen. Model Names The following name may be provided fo r the safety regulations in each sales region of the Document Scanner. DR-M160II: Model M111092 Trademarks • Canon and the Canon logo are registered trademarks, of Canon In ...
-
Canon imageFormula DR-M160II - page 4
4 Setup Guide STEP 1 Checking the Accessories If any of the items listed below are missing or da maged, cont act your local authorized Canon deal er or service representative. Scanner AC Adapter/Power Cord (Connect ed length: 2.6 m) Setup Guide Setup Disc USB Cable Type A/Typ e B (Length: 1.8 m) Warranty Card (U.S.A. a nd Canada onl y) Feed Tray ? ...
-
Canon imageFormula DR-M160II - page 5
5 Setup Disc Contents Install the following software n ecessa ry for using the scanner from the supplied Setup Disc. • CaptureOnTouch This is a dedicated scanning application fo r this product. • CapturePerfect 3.1 This is a scanning application for the DR series scanner. • Scanner Driver This is the scanner dr iver for this product. Third-Pa ...
-
Canon imageFormula DR-M160II - page 6
6 STEP 2 Installing the Software System requirements To use the scanner, your computer must satisfy the following system requirements. Comput er CPU: Intel Core 2 Duo 1.66GHz or faster Memory: 1 GB or more Hard disk: 3 GB or more available space required for installation of all software USB interface: Hi-Speed USB2.0 Monitor: Resolution of 1024 × ...
-
Canon imageFormula DR-M160II - page 7
7 Software Installation IMPORTANT • Install the software before connecting the scanner to the computer. • Log on to Windows as an Administrator. • Close all other applications before installing the software. 1 Insert the Setup Disc into the DVD drive of the computer. The setup menu automatically starts up when you insert the disc into the dri ...
-
Canon imageFormula DR-M160II - page 8
8 4 Follow the instructions on the scre en to complete installa tion. 5 Click [Exit] to finish installing the software. IMPORTANT • Install the software before connecting the scanne r to the computer. • Close all other applications before installing the software. 1 Insert the Setup Di sc into the DVD d rive of the comp uter. 2 Click [DR-M160 In ...
-
Canon imageFormula DR-M160II - page 9
9 3 Follow the instructions on the scre en to complete installa tion. 4 When the installation is complete, cl ick [Log out]. ...
-
Canon imageFormula DR-M160II - page 10
10 STEP 3 Connecting to a Computer Connect the scanner to the computer and th e power supply. IMPORTANT • Do not connect the scanner to the computer befo re installing the software. • Before connecting the scanner to th e computer, verify that the power of t he scanner is OFF. If the power is ON, turn it OFF. To the pow er outl et AC adapter (i ...
-
Canon imageFormula DR-M160II - page 11
11 STEP 4 Turning the Power ON The power of the scanner can be turned ON and OFF with the power button on the front of the scanner. 1 Make sure that the scan ner and compu ter are connected properly. 2 Press the power button. The power button lights blue when the power turns ON. Hint A balloon message such as shown be low appears on the task bar. I ...
-
Canon imageFormula DR-M160II - page 12
12 Introduction Thank you for purchasing the Canon imageFORMUL A DR-M160II Document Scanner. Please read the following manuals carefully and familia rize yourself with the functions of the scanner bef ore use to ensure you sufficiently understand the functions and make the most of the scanner’s capabilities. After reading the manuals, store them ...
-
Canon imageFormula DR-M160II - page 13
13 Hint In Windows 8.1/8, it is registered at the following location. Symbols Used in This Manual The following symbols are used in this manual to ex plain procedures, restrictions, handling pr ecautions, and instructions that should be observed for safety. WARNING Indicates a warning concerning operations that may lead to death or injury to person ...
-
Canon imageFormula DR-M160II - page 14
14 Table of Contents Setup Guide .................. ............ ........... .............. ........... ....... 4 Introduction . ............ ........... .............. ........... .............. ........ 12 Symbols Used in This Manual .................................................... 13 Before Using the Scanner .. ............. ........... 15 I ...
-
Canon imageFormula DR-M160II - page 15
15 Before Using the Scanner Important Safety Instructions To ensure the safe operation of this scanne r, be sure to read the safety warnings and precautions described below. Installation Location The performance of this scanner is affected by the environmen t in which it is installed. Make sure that the location where the scanner is installed meets ...
-
Canon imageFormula DR-M160II - page 16
16 Moving the Scanner ● When moving the scanner, always hold it with both hands to avoid dropping it. ● Make sure to disconnect the interface cable and AC adapter befo re moving the scanner. If the scanner is tran sported with these items connected, the plugs and connectors may be damaged. Handling WARNING Note the following precautions w henev ...
-
Canon imageFormula DR-M160II - page 17
17 ● When unplugging the power cord, gra sp it firmly by its plug. Do not pull directly on the power cord, as this may damage or expose the cord’s internal wiring, resulti ng in a fire or electric shock. ● Leave sufficient space around the pow er plug so that it can be unplugged easily. If objec ts are placed around the power plug, you will b ...
-
Canon imageFormula DR-M160II - page 18
18 Features of the Scanner The main features of the DR-M160II document scanner are described below. ● Compact D esign The scanner has a compact size of 280 mm (11.02")(W) x 250 mm (9.84")(D) x 230 mm (9.06")(H) wh e n the document feed is closed. ● Fast Docum ent Feeding Documents can be scanned at a speed of up to 60 pages per m ...
-
Canon imageFormula DR-M160II - page 19
19 ● Prescan Function The scanner is equipped with a Presc an function that allows you to adjust the contrast and brightne ss of a prescanned image and then send the adjusted image to the application software, w ithout needing to scan the document again. ● Character/Line Em phasis Function If characters and lines in scanned images are not clear ...
-
Canon imageFormula DR-M160II - page 20
20 Names and Functions of Parts Front View (With the Eject Tray Closed) A OPEN Lever Pull this toward you to open the front unit. B Power button Press this to turn on the sc anner. When pressed, the power indicator is lit. Press this button again to turn off the power. The power button lights or flashes as follows d epending on the scanner status. ...
-
Canon imageFormula DR-M160II - page 21
21 Front View (With the Eject Tray Open) G Feed Extension Support Open this when placing long paper in the scanner. H Feed Support Pull this out to support loaded documents. I Operating Panel A range of scanning operations c an be performed with this, such as starting and stopping scans, executing registered jobs, and cancelling double feed detecti ...
-
Canon imageFormula DR-M160II - page 22
22 Back View A USB Con nector Connect the supplied USB c able to this connector. B Power Connector Connect the supplied AC adapter to this connector. C Theft Prevention Ho le (Security Slot) Connect an anti-theft key chain or the like. Operating Panel A Job No. Indicator Displays the number of the job selected wit h the operating panel. B Job Selec ...
-
Canon imageFormula DR-M160II - page 23
23 Basic Operation Documents The scanner can scan documents rangi n g in size from business cards to LTR/A4. The document sizes that this scanner can scan are shown below. Plain Paper Size Width: 54 mm to 216 mm (2.12" to 8.5") Length: 50.8 mm to 356 mm (2" to 14") (You can scan documents up to 3,000 mm (118.1") long by set ...
-
Canon imageFormula DR-M160II - page 24
24 • Scanning the following types of documents can cause a paper jam or malfunction. To scan such a document, make a photocopy of the document and then scan the photocopy. Business Card Size: 50.8 mm x 85 mm (2" x 3.35") or larger Paper thickness: 380 g/m 2 (80 lb bond) 0.45 mm (0.177") or larger Orientation: Vertical feeding only ...
-
Canon imageFormula DR-M160II - page 25
25 How to Pla ce Documents Scanning multiple documents Standard p aper feeding should be u sed when scan ning multi ple documents of a stand ard size at one time. Standard paper feed ing enables multiple documents to be fed while separating each page. 1 Open the document eject tray. 2 Pull out the eject support. When placing long documents, pull ou ...
-
Canon imageFormula DR-M160II - page 26
26 4 Adjust the document guides to fit the width of the document to be sca nned. 5 Place the document. After placing the document, ali gn the document guides with both edges of the document. IMPORTANT • When placing documents into the feed tray, take care not to cut your hand on the edges of the pap er. • Make sure that the document does not ex ...
-
Canon imageFormula DR-M160II - page 27
27 2 Place the document as described in the “Scanning multiple d ocumen ts” procedure on p. 25 . IMPORTANT When scanning multiple page documents that are fastened together, such as invoices, place the documents so that the edge that is fastened together is facing dow n. 1 Opens the scanner driver's Detail Se ttings screen. (See p. 57) 2 Op ...
-
Canon imageFormula DR-M160II - page 28
28 Placing Thin Paper (Thin Paper Mode) When placing a document with th in paper, switch the mode of the scanner to thin paper mode. In thin paper mode, the placed document is fed in a manner that prevents it from being damaged. Thin paper mode switching is performed b y opening the scanner driver settings screen. 1 Sets the scanning condit ions. 2 ...
-
Canon imageFormula DR-M160II - page 29
29 3 Select the [Thin Paper Mode] che ck box. 4 Click to close the dialog box. Placing Cards When scanning cards, switch the scanner to non separation mo de and then place one card at a time horizontally. 1 Switch the scanner to non separation mode. 2 Adjust the document guides to fit the width of the card to be scanned. 3 Place the card horizontal ...
-
Canon imageFormula DR-M160II - page 30
30 Placing Folded Documents Folio Scan enables you to scan document s that are larger than LTR/ A4 and therefore do not fit in the fee der. To use the function, fold the document in half lengthwise and place it into the feeder. T he DR- M160II will scan both sides and combine the scanned images into a single image. 1 Sets the scanning condit ions. ...
-
Canon imageFormula DR-M160II - page 31
31 3 Open the [Feeding] tab. 4 Select the [Non Separation Feeding Mode] check box. 5 Click the [OK] button to close the settings screen. 1 Opens the scanner driver's Detail Se ttings screen. (See p. 47) 2 Set the [Paper Size] to half the size of the document (or [Detect automatically] when scanning nonstandard document). 3 Set [Scanning Side] ...
-
Canon imageFormula DR-M160II - page 32
32 Setting the Long Document Mode The length of documents that c an b e scanned with the scanner is normally 356 mm (14"), but you can scan documents up to 3,000 mm (118.1") long by setting the sc anner to the Long Document mode. IMPORTANT By selecting the Long Document mode and setting the [Paper Size] on the scanner driver settings sc r ...
-
Canon imageFormula DR-M160II - page 33
33 2 Click [CANON DR-M160 USB] and click [Properties]. Scanner properties are disp layed. 3 Click the [Maintenance] tab, and then select a Long Document mode. Select [Long Document Mode (1000 mm)] or [Long Docu ment Mode (3000 mm)] depending on the length of the document. 4 Click [OK]. 1 Opens the scanner driver's Detail Se ttings screen. (See ...
-
Canon imageFormula DR-M160II - page 34
34 Detecting a document double feed This scanner includes a function to detect document double feeds. By using this function, the scanner will automatically stop when it detects that multiple documents have been fed at the same time. You can also specify whether to save the scanned image after scanning has finished and continue scanning the do cume ...
-
Canon imageFormula DR-M160II - page 35
35 1 Opens the scanner driver's Detail Se ttings screen. (See p. 47) 2 Select the [Double Feed Detection] check box, and then select any one of [Detect b y Ultrasonic], [De tect by Length], and [Detect by Ultrasonic and Len gth]. 3 Click the [More] button when the Double Fee d Detection Ignore func tion is al so used . The scanner driver' ...
-
Canon imageFormula DR-M160II - page 36
36 When using the double feed detectio n ignore func tion If a document double feed is det ected during scanning, document feeding stops when the double fed do cuments are ejected. The following error code is displayed in the Job No. Indicator of the operating panel, and the DFR button lights. Also, the [Rapid Recovery System] screen appears to ena ...
-
Canon imageFormula DR-M160II - page 37
37 Double Feed Retry When a double feed has occurred, this function returns the document to the document feeder and re-feeds the pages (double feed retry). It is necessary to first open the scanner driver settings screen, and then enable the ultrasonic double feed detection and the double feed retry functions. Setting procedure 1 Opens the scanner ...
-
Canon imageFormula DR-M160II - page 38
38 Scanning methods Scanning with CaptureOnTouch What is CaptureOnTouch? CaptureOnTouch is a scanning a pplicat ion that allows you to scan a document with a simple operation by following the instructions on the screen. CaptureOnTouch is provided with mult iple scanning methods that can be selected according to the purpose and application. Scan Fir ...
-
Canon imageFormula DR-M160II - page 39
39 Hint • You can also start CaptureOnTouch from the Start menu. Click [Start] – [All Programs] – [Canon DR-M160] – [DR-M160 CaptureOnTouch]. • When [Make CaptureOnTouch resident] is turned on b y using the [Basic settings] tab on the [Envir onmental settings], this shortens the time from pressing the scanner start button to the start of ...
-
Canon imageFormula DR-M160II - page 40
40 Restarting CaptureOnTouch To use CaptureOnTouch after it is no longer resident in the system, restart it by following the procedur e below. CaptureOnT ouch will start and become resident in the system again. • Click [Start] – [All Programs] – [Canon DR-M160] – [DR-M160 CaptureOnTouch]. Hint In Windows 8.1/8, it is registered at the follo ...
-
Canon imageFormula DR-M160II - page 41
41 3 Set the scan method in the top screen. A Specify whet her to enable continuous scanning. When scanning multiple documents as one scanned image or splitting up a large document to scan in parts, select [ON] to enable continuous scanning. B Specify whether to scan the doc ument in full auto mode. When you want to specify arbitrary scanning condi ...
-
Canon imageFormula DR-M160II - page 42
42 5 Configure the settings relate d to output and then output the scanned imag es. A Configure the settin gs related to output. (See p. 49) B Click this butto n to output the scanned images. The button name differs for each output met hod. For example, it is [Save] when the output method is set to [Save to folder]. When output is finished, the co ...
-
Canon imageFormula DR-M160II - page 43
43 2 Enter the job name, and press the Enter key. Hint Job numbers up to 9 are added (i n numerical order) to the end of the set job name. By specifying t he job number with the operating panel, you can start scanning afte r pressing the operating panel button. (See p. 45) 3 Specify the ou tput method of the job. (See p. 49) 4 Click [Output setting ...
-
Canon imageFormula DR-M160II - page 44
44 Hint • If you set [Enable continuous scanning] to [ON], you can continue to scan additional documents after all t he pages of the initial document are scanned. • If you set [Check output after scanning] to [ON], you can check the output settings after scanning. 3 Click the Start button. The document is scanned. Wh ile scanning is in progress ...
-
Canon imageFormula DR-M160II - page 45
45 Operating the scanner with the operating panel buttons You can start scanning by selecti ng a job from the scanner’s operating panel. 1 Set a job number every time a job is registered with CaptureOnTouch. 2 Place the document in the scanner. 3 Press the Job Se lect button in the operating panel to display th e required job numb er in the Jo b ...
-
Canon imageFormula DR-M160II - page 46
46 Setting Basic Items Scanner settings include the basic items that are configured in [Scanner Setting], and the setting item s that are configured in th e advanced settings dialog box. The settings in the advanced settings dialog box are applied for settings other than the basic items. The settings in the driv er settings dialog box ar e applied ...
-
Canon imageFormula DR-M160II - page 47
47 For details on the setting items, see the Help of the driver settings dialog box. Hint The driver settings dialog box incl udes setting items that are the same as the basic items in [Scanner S ettings], but the setting for each of the them is stored sep arate ly. Which settings are used d uring scanning differs as follows depending on the settin ...
-
Canon imageFormula DR-M160II - page 48
48 Operation in Continuous Scanning Screen If a document is scanned with eit her Scan First or Select Scan Job when [Enable continuous scanning] is set to [ON] in the Start screen, the Continuous Scanning screen appears when all of the pages of the placed document have been fed. You can confirm the scanned images and then continue scanning. A Thumb ...
-
Canon imageFormula DR-M160II - page 49
49 Setting the Ou tput Method CaptureOnTouch is provided with various output methods for processing scanned images. The output method specification is common to Scan First and Select Scan Job. Scan First: For Scan First, select an output method in the output method selection screen which appears after scanning, and then specify each of the output m ...
-
Canon imageFormula DR-M160II - page 50
50 Other Output Methods In an environment in which Micros oft SharePoint Server has been introduced, you can send scanned images to a Microsoft SharePoint site. To do so, select [Save in Microsoft SharePoint] as the output method, and configure the setting fo r the image files to be sent. You must also open the advanced settings dialog bo x and con ...
-
Canon imageFormula DR-M160II - page 51
51 Environmental Settings To configure the environmental set tings of CaptureOnTouch, open the [Environmental settings] dialog box. Click (CaptureOnTouch icon) in the taskbar, and select [Environmental settings] from the menu. The following describes the setting items of each tab displayed in the [Environmental settings] dialog box. [Basic settings ...
-
Canon imageFormula DR-M160II - page 52
52 Maximum size of attached file Select the [Display confirmation me ssage if file size exceeds the above] check box to display a conf irmation message when an attached file exceeds th e maximum size. • For Scan First, a confirmation message appears if the file size of scanned images is larger than the file size set here. • For Select Scan Job, ...
-
Canon imageFormula DR-M160II - page 53
53 Click [Preferences] from the [C aptureOnTouch DR-M160] menu while the main screen of CaptureOnTouch is displayed. The following describes the setting items of each tab displayed in the [Environmental Settings] dialog box. [Basic settings] Tab On the [Basic settings] tab, configure the following settings. Launch method setting By default, Capture ...
-
Canon imageFormula DR-M160II - page 54
54 [Theme] Tab On the [Theme] tab, specify the appearance of the main screen of CaptureOnTouch. Select theme Specify the appearance type for the main screen of CaptureOnTouch with [Select theme]. [Plugin] Tab On the [Plugin] tab, confirm the plugins that have been added to CaptureOnTouch. Hint Initially, the list under the [Plugin] tab is empty. De ...
-
Canon imageFormula DR-M160II - page 55
55 Scanning with CapturePerfect Scanning with CapturePerfect This section describes procedures from launching CapturePerfect to selecting a scanner, as well as pr ocedures for scanning with the [Scan batch to file] function. See the “CapturePerfect Operatin g Guide” or help for details. 1 From the Windows task bar, cl ick [Start] and then selec ...
-
Canon imageFormula DR-M160II - page 56
56 6 Configure the scann ing conditi ons. (See p. 57) 7 Place the document. (See p. 25) 8 Click [Scan Batch to File] in the [Scan] menu. 9 Configure the save destination, the n ame of the file to be saved and the file format, and then cl ick [Save] to start scanning. IMPORTANT If you configure scanning conditions that consume a large amount of the ...
-
Canon imageFormula DR-M160II - page 57
57 Setting the Scanner Driver When you scan a document in an ISIS compatible (CapturePerfect, etc.) or TWAIN compatible applic ation, open the scanner driver and configure the scanning condi tions and other settings. This section describes the con figur ation and functions of the scanner drive r. Configuration and Functions of the Scanner Driver Th ...
-
Canon imageFormula DR-M160II - page 58
58 In addition, you can also click [Ga mma] and set the gamma correction value for scanned images. [Image processi ng] tab Set the processing method for scanned images. [Feeding] tab Specify scanner operations related to document feeding. [Others] tab Configure special scan method and image processing settings. ...
-
Canon imageFormula DR-M160II - page 59
59 When the scanner driver is opened from CaptureOnTouch, the following settings screen of the scanner driver appears. Hint When the Advanced Settings screen is c alled from some applications, the Advanced Settings screen may have the S imple mode and Advanced mode. Simple Mode Advanced Mode ...
-
Canon imageFormula DR-M160II - page 60
60 Setting Basic Sc anning Conditions This section provides an overview of the basic setting items that are the minimum requirements when c onfiguring the scanner settings. Confirming Basic Conditions for Scanning When you scan a document, make su re you confirm the [Color mode], [Page Size], [Dots per inch], and [S canning Side] basic conditions i ...
-
Canon imageFormula DR-M160II - page 61
61 Dots per i nch Select the scanning resolution. • Higher resolutions provide clearer im ages but r esult in larger file sizes and slower scanning. • When [Detect automatically] is speci fied, the resolution is detected automatically from the content printed in the documen t. Scanning Side Select which of the sides of the document to scan. If ...
-
Canon imageFormula DR-M160II - page 62
62 Color mod e Select the scanning mode. • [Advanced Text Enhancement II] removes or processes the background color and background surroun ding text to enhance the text for easy reading. • [Detect automatically] detects whether a document is color, grayscale, or black and white bas ed on its content. When this is selected, you can configure det ...
-
Canon imageFormula DR-M160II - page 63
63 Scanning Documents of Unregistered Page Sizes You can register a non-standar d page size that has not been registered as a page size by naming and register ing it as a custom page size in the Custom Paper Size dialog box, which is opened from the [Save] button on the [Basic] tab. Configuring the following settings allows you to scan a document o ...
-
Canon imageFormula DR-M160II - page 64
64 Configuring Scanner Settings According to Purpose Set the scanning conditions acco rding to the scanning purpose. When you wan t to delete the images of the blank pages in two-sided docu ments Set the scanning side setting to [Skip Blank Page] on the [Basic] tab to delete the images of the blank pages in the docu ment. If [Skip Blank Page] is se ...
-
Canon imageFormula DR-M160II - page 65
65 When you do no t want to scan colored lines and text Specify the color (red, green, blue, all colors) to be ignored (dropped out) in the color drop-out settings on the [Image proce ssing] tab, and that color will be removed from the scanned image. Click [Image processing], and when a dialog box opens, spe cify the color (red, blue, or green) to ...
-
Canon imageFormula DR-M160II - page 66
66 When you want to en ha nce contours in images Adjust the edge emphasis setting on the [Image processing] tab. Click [Image processing] and adjust the edge emphasis settings in the dialog box which appears. When you want to make li nes and text in scanned image s thicker or thinner Drag the [Character Emphasis] slider in the [Image processing] ta ...
-
Canon imageFormula DR-M160II - page 67
67 When you want to enhance text that is difficult to read because of factors such as th e backgrou nd of the scanned docu ment Select [Advanced Text Enhancement] or [Advanced Text Enhancement II] in the mode setting on the [Basic] tab. The background behind the text is removed or processed so that the text is emphasized for better readability. • ...
-
Canon imageFormula DR-M160II - page 68
68 When you want to de tect mu ltiple pages fed at the same time Select the [Double Feed Detection] check box on the [Feeding] tab . You can enable either one or both of [Detect by Ultrasonic] and [Detect by Length]. Select the [Double Feed Detection] check box. When you want to match the or ientation of imag es to the text when sc anning a mi xtur ...
-
Canon imageFormula DR-M160II - page 69
69 Select the [Text Orientation Recognition] check box. The text orientation on each page is detected, and the scanned image is rotated in 90-degree increments to correct the orientation. Hint When the [Text Orientation Recog nition] check box is selected, [Document Orientati on] is unavailable. When you want to rotate the ima ges of a document pla ...
-
Canon imageFormula DR-M160II - page 70
70 When you want to us e ba tch separation for scanning When you want to divide and sc an a document, you can separate a batch at the timing with whic h each next document is placed and scanned. (Only enabled for applications that support batch separation.) In this case, set the scanner driver as follows. • Set [Feeding Option] on the [Feed ing] ...
-
Canon imageFormula DR-M160II - page 71
71 A When you want to specify different scanning conditions for the front and back pages of a document, select [Skip Blank Page] or [Both] for [Scanning Side] on the [Basic] tab in advance. B Specify the number of scanning conditions to apply in [Stream count of Front]. Up to three can be specified. C Select [Front 1st], and then open the other tab ...
-
Canon imageFormula DR-M160II - page 72
72 When you want to remove do ts and notches that appear in documents You can remove dots and notches prot ru ding from object outlines that appear in documents from scanned images. • Select the [Erase Dot] check box to automatically re move isolated black dots (3 x 3 dot size) from white backgrounds (or white dots from black backgrounds). • Se ...
-
Canon imageFormula DR-M160II - page 73
73 When you want to save a scanner driver setting When you finish configuring a setti ng, click the [Save] button of [User Preference] to save the setting. The saved setting is registered to the list. You can delet e a setting from the list with the [Delete] butt on, and save or load a configuration file with the [Back Up] or [Restore] button. When ...
-
Canon imageFormula DR-M160II - page 74
74 Function Restrictions Depending on Color Mode Setting Some of the setting items in each of the driver tabs are disab led as follows depending on the setting for [Color Mode] on the [ Basic] tab. [Brightness] tab (O: Available for setting, X: Not available for setting) [Others] Tab (O: Available for setting, X: Not available for setting) [Image p ...
-
Canon imageFormula DR-M160II - page 75
75 2) Not available for setting if either one of the following two conditions are met. • [Detection mode] in the [Auto Image Type Detectio n Settings] dialog box is set to [Color or Gray] • [Mode in case of binary] in the [Settings for in case of binary] tab is set to [Error Diffu sion] 3) Not available for setting if [Detection mo de] is set t ...
-
Canon imageFormula DR-M160II - page 76
76 Advanced mode (Image p rocessing dialog) O: Available for setting X: Not available for setting 1) Cannot be set if the [Detect automatic ally] setting matches the condition s below • [Detection Mo de] is not set to [Color or Gray] Setting value Edge emphasis Background smoothing Character Emphasis Prevent Bleed Through / Remove Background Colo ...
-
Canon imageFormula DR-M160II - page 77
77 More Advanced Scanning Me thods (Batch Separation) Batch Separation (Insert blank page) Recognizes blank pages as batch separat ors and performs batch separation (automatic file separat ion) when do cuments containing blank pages are scanned. On the [Others] tab of the ISIS dr iver properties, sele ct [Blank Page] from the Batch Separation dropd ...
-
Canon imageFormula DR-M160II - page 78
78 1 Print patchcode with a printer. Click [Start] – [All Programs] – [Canon DR-M160] a nd then select [Patchcode] from the menu. Patchcodes can be printed in A4 and letter (LTR) sizes. Open the application and print a patchcode that is the same size as the document to be scanned. Hint In Windows 8.1/8, it is registered at the following locatio ...
-
Canon imageFormula DR-M160II - page 79
79 2 Place the documents in the scan ner after inserting the patchcode sheet in front of the page that separates the files. 3 In an application, specify a patchco de as a type of batch separation. When using CapturePerfect, select [Patchcode] in t he [Batch Separator] settings. When using other ISIS-compatibl e applications, open the scanner driver ...
-
Canon imageFormula DR-M160II - page 80
80 Maintenance Daily Maintenance Clean the scanner on a reg ular basis, as described below, to mainta in peak scanning qualit y. CAUTION • When cleaning the scanner and the inside of the scanner, turn OF F the power switch and disconnect the power cord from the power outlet. • Do not use spray cleaners to clean the scanner. Precision mechanisms ...
-
Canon imageFormula DR-M160II - page 81
81 2 Pull the OPEN leve r and pull open the front unit toward you. 3 Use compressed air to remove dust and paper particles from the inside of the scanner. 4 Wipe any di rt off the sc anning glass . Wipe any dirt off the scanning glass w ith a cloth that has been dampened with water and thoroughly wrung out, and then wipe the glass dry with a clean, ...
-
Canon imageFormula DR-M160II - page 82
82 5 Clean the rollers. Clean the rollers while turning them. Wipe the rollers with a cloth that has bee n dampened with water and thoroughly wrung out, and then use a clean, dry and soft cloth to wipe away any moisture. 6 Remove the retard roller and fe ed roller. (Se e p. 86, p. 87) IMPORTANT Remove the retard roller and feed roller from the scan ...
-
Canon imageFormula DR-M160II - page 83
83 9 Close the front un it by gently pu shing it up on bo th sides until it clicks into pl ace. Make sure that the front unit is completely close d by pushing until you h ear a click. 10 Close the document eject tray. Adjusting the R eduction Ratio As the rollers installed in the scanner wear out, scanned images may become stretched in the ve rtica ...
-
Canon imageFormula DR-M160II - page 84
84 2 Click [Canon DR-M160 USB] and click [Prop erties]. Scanner properties are disp layed. 3 Click the [Maintenanc e] tab and then ch ange the val ue of [Reduction ratio adjustment]. The adjustment value can be se t within the range from -3.0% to 3.0%. 4 Click [OK] to close th e scanner properties. 1 Opens the scanner driver's Detail Se ttings ...
-
Canon imageFormula DR-M160II - page 85
85 Replacing Consumable Parts The two rollers (feed roller and retard roller) installed in the scan ner are consumable parts. The feed rolle r and retard roller wear with scanning. If the feed roller and retard roller are worn, documents may not feed correctly and paper jams and double feeds may occur. When more than 200,000 pages have been fed (to ...
-
Canon imageFormula DR-M160II - page 86
86 Hint The location of each of the consumable parts is shown below. 3 When closing the front unit, make sure that it is completely cl osed by gently press ing the left and rig ht until you hear a clic k. 4 Close the document eject tray. Replacing the Feed Roller 1 Open the roller cover. Retard roll er (inside the front unit) Feed Roller ...
-
Canon imageFormula DR-M160II - page 87
87 2 Remove the feed roller. 3 Install the new feed roller. 4 Close the rolle r cover. Replacing the Retard Roller 1 Open the roller cover. 2 Pull the left lever that secures the retar d roller to the scanner, and remove the rolle r. ▼ ...
-
Canon imageFormula DR-M160II - page 88
88 3 Install the new retard ro ller by ins erting the right side first. 4 Push the left side of the retard roll er to secure it to the scanner. 5 Close the rolle r cover. Resetting the counter IMPORTANT Log on to Windows as an Administrator. 1 Click the Start button, and then click [All Pro grams], [Canon DR-M160], and [Canon imageFO RMULA Ut ility ...
-
Canon imageFormula DR-M160II - page 89
89 2 Click [Canon DR-M160 USB] and click [Prop erties]. Scanner properties are disp layed. 3 Click the [Maintenance] tab an d then select [Reset]. The counter for [Current Rollers] resets. 4 Click [OK] to close the scanner pro perties. 1 Opens the scanner driver's Detail Se ttings screen. (See p. 47) 2 Click to display the [Scanner Information ...
-
Canon imageFormula DR-M160II - page 90
90 Auto Power Off Setting The scanner automatically turns off if 4 hours elapse without scanning or another operation being performed. To disable this setting, follow the procedure below. IMPORTANT Log on to Windows as an Administrator. 1 Click the Start button, and then click [All Programs], [Canon DR-M160], and [Canon imageFORMUL A Utility] . ima ...
-
Canon imageFormula DR-M160II - page 91
91 4 Click [OK] to close th e scanner properties. Removing the Document Feed Tray When you will store or otherwise not use the scanner for a long period of time, remove the document feed tray. ...
-
Canon imageFormula DR-M160II - page 92
92 Troubleshooting Common Problems and Solutions This section provides recommended so lutions to common problems. If you have a problem that is not solv ed by the following, contact your local authorized Canon dealer. Problem 1 The scanner will not turn on. Solutions Confirm that the AC adapter is plugged firmly into a power outlet. Problem 2 The s ...
-
Canon imageFormula DR-M160II - page 93
93 Problem 6 Pages are missing. Solutions When the scanner driver’s [Scanni ng Side] setting is [Skip Blank Page], documents wi th very little black may be unintentionally skipped. Decrease the Set the likelihood of skipping blank page value ("Wh en you want to delete the images o f the blank pages in two- sided documents" on P. 59) or ...
-
Canon imageFormula DR-M160II - page 94
94 Problem 11 Memory becomes insufficient and s canning stops. Solutions If you configure scanni ng conditions that use a large amount of the computer’s memory, scanning may stop because of insufficient memory. Although this depends on the computer’s memory size, the possibility of insufficient memory increases if any of the following scanning ...
-
Canon imageFormula DR-M160II - page 95
95 Software Tr oubleshooting This section describes troubleshoot ing problems and solutions for operating the supplied software (CaptureOnTouch and CapturePerfect). If scanning is too slow (1) Close other running programs, if any. (2) Scanning can be slowed down by memory shortage caused by memory-resident applicat ions such as anti-virus programs. ...
-
Canon imageFormula DR-M160II - page 96
96 Useful tips Here are some useful ti ps for scanning documents. Where are scanned images saved? Can the save destination be changed ? Images are saved to the followin g locations, according to program settings. For example, save locations such as the following can be set in CaptureOnTouch. CaptureOnTouch • For Scan First scanning, files are sav ...
-
Canon imageFormula DR-M160II - page 97
97 CapturePerfect The rules for the file names of scanned images and the fo lder in which scanned images are saved can be set and then applied during scanning. For details, see the “O perating Guide” or help of CapturePerfect. How do I scan half-folded do cuments (folio sc anning)? Fold the document in half, and set it in the scanner with the f ...
-
Canon imageFormula DR-M160II - page 98
98 Clearing a Paper Jam When paper jams are detected duri ng scanning, th e following error codes are displayed in the scanner ’s display panel and scanning is interrupted. When a paper jam or double feed occurs during scanning, use t he following procedures to clear them. CAUTION Be careful when removing jammed paper. take care not to cut your h ...
-
Canon imageFormula DR-M160II - page 99
99 IMPORTANT Make sure to pull the docume nt out carefully, without applying too much force. If the jammed paper tears while you are pulling it out, make sure to remove any remaining pieces from insid e the scanner. 4 Close the front un it by gently pu shing it up on bo th sides until it clicks into pl ace. Make sure that the front unit is complete ...
-
Canon imageFormula DR-M160II - page 100
100 Uninstalling the Software If the ISIS/TWAIN driver, CaptureO nTouch or Ca pturePerfect is not operating normally, follow the pr ocedure below to uninsta ll them. Then, re-install the software from the Setup disc. (See p. 7) IMPORTANT Log on to Windows as an Administrator. 1 From the Windows task bar, cl ick the [Start] button and then [Control ...
-
Canon imageFormula DR-M160II - page 101
101 Appendix Specifications Main Unit Type Desktop sheetfed scanner Scanning Document Size Plain Paper Size: Width: 54mm to 216 mm (2.12" to 8.5") Length: 50.8 mm to 356 mm (2" to 14") (You can scan documents up to 3,000 mm (118.1") long by setting the scanner to the Long Document mode.) Paper weight: Page separation: 27 to ...
-
Canon imageFormula DR-M160II - page 102
102 AC Adapter (100 to 2 40 V type) Model Number MG1-4558 Input AC100 to 240V, 50/60 Hz, 0.3 to 0.53 A Output DC24V 2.0A Weight Approximately 0.2kg (0.44 lb) (including power cord) Specifications are subject to change without notice due to product improvements. Replacement parts Exchange roller kit (product co de: 9764B001) Kit to replace the rolle ...
-
Canon imageFormula DR-M160II - page 103
103 Dimensions 230 mm (9.06") 280 mm (11.02") 606 mm (23.86") 366.4 mm (14.43") ...
-
Canon imageFormula DR-M160II - page 104
104 Index A Adjusting the Reduction Ratio .................................................... 83 Setting procedure(Windows) ............................................... 83 Setting procedure(Mac) ....................................................... 84 Advanced Mode(Mac) ........................................ ........................ 59 Auto ...
-
Canon imageFormula DR-M160II - page 105
105 S Scanner Driver Basic Settings ......................... ............................................. 60 Configuring Settings According to Purpose . ........................ 64 Scanning Glass Cleaning ............................................................................ ... 80 Separation Retry .......................................... ...
-
Canon imageFormula DR-M160II - page 106
CANON ELECTRONICS INC. 3-5-10 SHIBAKOEN, MINA TO-KU, TOKYO 105-0011, JAPAN CANON U.S.A. INC. ONE CANON PARK, MELVILLE, NY 117 47, U.S.A. CANON CANADA INC. 6390 DIXIE ROAD, MISSISSA UGA, ONTARIO L5T 1P7, CANADA CANON EUROPA N.V. BOVENKERKERWEG 59, 1185 XB AMSTELV EEN, THE NETHERLANDS CANON LATIN AMERICA, INC. ONE CANON PARK, MELVILLE, NY 117 47, U.S ...
Do you have a question concerning Canon imageFormula DR-M160II?
Use the form below
If you did not solve your problem by using a manual Canon imageFormula DR-M160II, ask a question using the form below. If a user had a similar problem with Canon imageFormula DR-M160II it is likely that he will want to share the way to solve it.