-
D-Link DWL_7100 - page 1
DWL-7100AP 802.1 1a/802.1 1g (2.4/5GHz) Manual Building Networks for People D-Link Air Premier AG Wireless Access Point TM ...
-
D-Link DWL_7100 - page 2
2 Content s Package Contents ................................................................................ 3 Introduction ............................................................................................ 4 Wireless Basics .................................................................................... 6 Installation Considerations ...
-
D-Link DWL_7100 - page 3
3 Content s of Package: D-Link Air Premier TM AG DWL-7100AP 802.1 1a/802.1 1g (2.4GHz/5GHz) Wireless Access Point Power Adapter – 5V DC, 2.0A Manual on CD Quick Installation Guide Ethernet Cable Note: Using a power supply with a different voltage than the one included with the DWL-7100AP will cause damage and void the warranty for this product. I ...
-
D-Link DWL_7100 - page 4
4 Introduction The DWL-7100AP has the newest, strongest and most advanced security features available today . When used with other 802.1 1 WP A (Wi-Fi Protected Access) compatible products in a network with a RADIUS server , the security features include: WP A: W i-Fi Protected Access which authorizes and identifies users based on a secret key that ...
-
D-Link DWL_7100 - page 5
5 Better security with WP A- The DWL-7100AP can securely connect to wire- less clients on the network using WP A (Wi-Fi Protected Access) providing a much higher level of security for your data and communications than has previ- ously been available. Compatible with the 802.1 1b st andard to provide a wireless data rate of up to 1 1Mbps ...
-
D-Link DWL_7100 - page 6
6 Wireless Basics D-Link Air Premier TM AG wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business or public access wireless networks. S trictly adhering to the IEEE standard, the D-Link Air Premier TM AG wireless family of product s will allow you to secure ...
-
D-Link DWL_7100 - page 7
7 Wireless Basics (continued) St andards-Based T echnology The DWL-7100AP Wireless Access Point utilizes the 802.1 1a, 802.1 1b and draft 802.1 1g standard. The IEEE 802.1 1g standard is an extension of the 802.1 1b standard. It increases the data rate up to 54Mbp s within the 2.4GHz band. The 802.1 1a standard also increases the data rate up to 54 ...
-
D-Link DWL_7100 - page 8
8 Wireless Basics (continued) Inst allation Considerations Desktop and laptop computers with wireless network adapters installed can access the D-Link Air Premier TM AG DWL-7100AP from virtually anywhere within its operating range. Keep in mind, however , that the number, thickness and location of walls, ceilings, or other objects that the wireless ...
-
D-Link DWL_7100 - page 9
9 Getting S t arted An Infrastructure wireless network contains an access point or router . The Infrastructure Network example, shown on the following page, contains the following D-Link network devices: A wireless Access Point - D-Link Air Premier TM AG DWL-7100AP An Ethernet Router - D-Link DI-604 A laptop computer with a wireless adapter - D-Lin ...
-
D-Link DWL_7100 - page 10
10 Y ou will need a broadband Internet access (Cable/DSL) subscription Consult with your Cable/DSL provider for proper installation of the modem Connect the modem to an Ethernet broadband router such as the DI-604. ( See the Quick Installation Guide included with the DI-604. ) Connect the router to the D-Link Air Premier TM AG DWL-7100AP . ( See th ...
-
D-Link DWL_7100 - page 11
11 Whenever you want to configure your network or the DWL-7100AP , you can access the Configuration Menu by opening the web-browser and typing in the IP address of the DWL-7100AP . The DWL-7100AP default IP address is shown below: Open the web browser T ype in the IP address of the access point Note: if you have changed the default IP address assig ...
-
D-Link DWL_7100 - page 12
12 Using the Configuration Menu (continued) Home > Wireless Apply- Click Apply to save the changes. Radio Frequency- The radio frequency will remain at 2.437GHz . Channel- 6 is the default channel. All devices on the network must share the same channel. SSID Broadcast- Enable or Disable SSID Broadcast. Enabling this feature broadcasts the SSID a ...
-
D-Link DWL_7100 - page 13
13 Using the Configuration Menu (continued) Home > LAN LAN is short for Local Area Network. This is considered your internal network. These are the IP settings of the LAN interface for the DWL-7100AP . These settings may be referred to as private settings. Y ou may change the LAN IP address if needed. The LAN IP address is private to your intern ...
-
D-Link DWL_7100 - page 14
14 Using the Configuration Menu (continued) Advanced > Mode Access Point: Select this mode to create a WLAN (wireless local area network). PtP Bridge (Point to Point Bridge): This mode enables you to connect two WLANS. Remote AP MAC Address: Input the remote AP MAC address of the AP with which the DWL-7100AP will associate. PtMP Bridge (Point to ...
-
D-Link DWL_7100 - page 15
15 Using the Configuration Menu (continued) Advanced > Performance T ransmit Power: Adjust the transmission range here. This tool can be help ful for security purposes if you wish to limit the transmission range. Super Mode: Select Enabled or Disabled. Radio W ave: Select ON or OFF . Apply: Click Apply if you have made any changes. Frequency: Th ...
-
D-Link DWL_7100 - page 16
16 Using the Configuration Menu (continued) Advanced > Filters Access Control: Disabled - Disable the Access Control feature Accept - Accept the MAC addresses in the list into the network Reject - Reject the MAC addresses in the list from participating in the network Access Control List: Input the MAC addresses into the list MAC Address ( M edia ...
-
D-Link DWL_7100 - page 17
17 Using the Configuration Menu (continued) Advanced > Encryption Encryption: Select Enabled or Disabled (the default setting is Disabled ) Authentication: Select from one of the following: Key T ype: Select HEX (Hexadecimal) or ASCII Key Size: Select 64, 128 or 256 bit for 802.1 1b; 64, 128, 152 bit for 802.1 1a V alid Key: Select the key that ...
-
D-Link DWL_7100 - page 18
18 Using the Configuration Menu (continued) Advanced > Grouping Load Balance: Select Enabled or Disabled . Link Integrity: Select Enabled or Disabled . User Limit: Set the User Limit in this field (0-64). When you Enable Load Balance you allow several DWL-7100APs to balance wireless network traffic and wireless clients among the DWL-7100APs in t ...
-
D-Link DWL_7100 - page 19
19 Using the Configuration Menu (continued) Advanced > DHCP Server > Dynamic Pool Settings DHCP Server Control- Dynamic Pool Settings- Enable or Disable the DHCP function here. Enter the starting IP address in the range. IP Assigned From - Enter the number (the quantity) of IP address in the range. The Range of Pool (1-255)- Enter the subnet ...
-
D-Link DWL_7100 - page 20
20 Using the Configuration Menu (continued) Advanced > DHCP Server > S t atic Pool Settings DHCP Server Control- Static Pool Settings- Enable or Disable the DHCP function here. Enter the static IP address of the de- vice here. Assigned IP- Enter the MAC ad- dress of the device here. Assigned MAC Address- Enter the subnet mask here. SubMask- E ...
-
D-Link DWL_7100 - page 21
21 Using the Configuration Menu (continued) Advanced > DHCP Server > Current IP Mapping List Current DHCP Dynamic Pools- These are IP address pools to which the DHCP server function has assigned dynamic IP addresses. Binding MAC address- Assigned IP address- Lease Time- Current DHCP Static Pools- These are IP address pools to which the DHCP s ...
-
D-Link DWL_7100 - page 22
22 Using the Configuration Menu (continued) T ools > Admin T ools > System User Name: The default User Name is admin. Old Password: T o change your password, first enter the old password. New Password: Enter the new password. Confirm New Password: Re-enter the new password. Apply: T o save changes, click Apply . Apply Settings and Restart: If ...
-
D-Link DWL_7100 - page 23
23 Using the Configuration Menu (continued) Update File: Click on Browse to find the updated firmware file on your hard drive. (Before you browse your hard drive you will need to download the updated firmware from the D-Link Support website: http://support.dlink.com) After you find the updated firmware file on your hard drive, click OK . T ools> ...
-
D-Link DWL_7100 - page 24
24 Using the Configuration Menu (continued) T ools > Cfg File Browse for the con- figuration settings that you have saved to your hard drive. Click OK when you made your selection. Update File- Click OK to load the selected settings. Load Settings to the Local Hard Drive- Status- T elnet Settings Select a time period after which a ses- sion time ...
-
D-Link DWL_7100 - page 25
25 This window displays the network traffic statistics for both received and transmitted communications through the Ethernet port and wireless connec- tions associated with the access point. Y ou may select 802.1 1a or 802.1 1g st atis- tics. Using the Configuration Menu (continued) St atus > St ats St atus > Device Info This window displays ...
-
D-Link DWL_7100 - page 26
26 The Help menu is displayed here. Y ou can also click on Help in any window for additional information. Help Using the Configuration Menu (continued) ...
-
D-Link DWL_7100 - page 27
27 Using the Network Setup Wizard in Windows XP In this section you will learn how to establish a network at home or work, using Microsof t Windows XP . Note: Please refer to websites such as http://www .homenethelp.com and http://www .microsof t.com/windows2000 for information about networking computers using Windows 2000, Me or 98. Go to Start> ...
-
D-Link DWL_7100 - page 28
28 Networking Basics (continued) Click Next . In the following window , select the best description of your computer . If your computer connects to the internet through a gateway/router , select the second option as shown. Click Next . Please follow all the instructions in this window: ...
-
D-Link DWL_7100 - page 29
29 Enter a Computer description and a Computer name (optional.) Networking Basics (continued) Click Next . Enter a Workgroup name. All computers on your network should have the same Workgroup name. Click Next . ...
-
D-Link DWL_7100 - page 30
30 Please wait while the Network Setup Wizard applies the changes. Networking Basics (continued) When the changes are complete, click Next . Please wait while the Network Setup Wizard configures the computer . This may take a few minutes. ...
-
D-Link DWL_7100 - page 31
31 Networking Basics (continued) In the window below , select the option that fits your needs. In this example, Create a Network Setup Disk has been selected. Y ou will run this disk on each of the computers on your network. Click Next . Insert a disk into the Floppy Disk Drive, in this case drive A. Format the disk if you wish, and click Next. ...
-
D-Link DWL_7100 - page 32
32 Networking Basics (continued) Please read the information under Here’ s how in the screen below . After you complete the Network Setup Wizard you will use the Network Setup Disk to run the Network Setup Wizard once on each of the computers on your network. T o continue click Next. ...
-
D-Link DWL_7100 - page 33
33 Networking Basics (continued) Please read the information on this screen, then click Finish to complete the Network Setup Wizard . The new settings will take ef fect when you restart the computer . Click Ye s to restart the computer . Y ou have completed configuring this computer . Next, you will need to run the Network Setup Disk on all the oth ...
-
D-Link DWL_7100 - page 34
34 Select the Computer Name T ab in the System Properties window . Y ou may enter a Com- puter Description if you wish; this field is optional. T o rename the computer and join a domain, click Change . Networking Basics (continued) Naming your Computer T o name your computer in Windows XP , please follow these directions: Cl ...
-
D-Link DWL_7100 - page 35
35 Networking Basics (continued) Naming your Computer In this window , enter the Computer name . Select Workgroup and enter the name of the Workgroup . All computers on your network must have the same Workgroup name. Click OK . Checking the IP Address in W indows XP The wireless adapter-equipped computers in your network must be in ...
-
D-Link DWL_7100 - page 36
36 Assigning a St atic IP Address in W indows XP/2000 Note: DHCP-capable routers will automatically assign IP addresses to the comput- ers on the network, using DHCP (Dynamic Host Configuration Protocol) technol- ogy. If you are using a DHCP-capable router you will not need to assign static IP addresses. If you are not using a DHCP cap able router ...
-
D-Link DWL_7100 - page 37
37 Networking Basics (continued) Assigning a St atic IP Address in W indows XP/2000 Double-click on Network Connections . Double-click on Properties . Right-click on Local Area Connections . ...
-
D-Link DWL_7100 - page 38
38 Networking Basics (continued) Assigning a St atic IP Address in Windows XP/2000 Click on Internet Protocol (TCP/IP) Click Properties IP Address: e.g., 192.168.0.2 Subnet Mask: 255.255.255.0 Default Gateway: Enter the LAN IP address of the wireless router . (D-Link wireless routers have a LAN IP address of 192.168.0.1) In the window below ...
-
D-Link DWL_7100 - page 39
39 Networking Basics (continued) Checking the Wireless Connection by Pinging in Windows XP and 2000 Go to Start > Run > type cmd . A window similar to this one will appear . T ype ping xxx.xxx.xxx.xxx , where xxx is the IP Address of the Wireless Router or Access Point. A good wireless connection will show four replies from the Wireless Route ...
-
D-Link DWL_7100 - page 40
40 1. Check that the Ethernet LED on the DWL-7100AP is ON . If the LED is not ON , check that the cable for the Ethernet connection is securely inserted. Check that the Ethernet adapter is working properly . Please see item 3 in this section: Check that the drivers for the network adapters are inst alled properly . Check that the IP address is in t ...
-
D-Link DWL_7100 - page 41
41 2. Make sure the wireless client is associated and joined with the correct access point. T o check this connection: Right-click on the Local Area Connection icon in the taskbar> select View Available Wireless Networks . The Connect to Wireless Network screen will appear . Please make sure you have selected the correct available network, as sh ...
-
D-Link DWL_7100 - page 42
42 T roubleshooting (continued) 3. Check that the drivers for the network adapters are inst alled properly . Y ou may be using different network adapters than those illustrated here, but this procedure will remain the same, regardless of the type of network adapters you are using. Go to Start Right-click on My Computer Click Properties Select the H ...
-
D-Link DWL_7100 - page 43
43 T roubleshooting (continued) Double-click on Network adapters Right-click on D-Link DWL-A650 Wireless Cardbus Adapter Select Properties to check that the drivers are in- stalled properly Look under Device status to check that the device is working properly Click OK D-Link DWL-A650 D-Link DWL-A650 ...
-
D-Link DWL_7100 - page 44
44 T roubleshooting (continued) 4. What variables may cause my wireless products to lose recep- tion? D-Link products let you access your network from virtually anywhere you want. However , the positioning of the products within your environment will affect the wireless range. Please refer to Installation Considerations in the Wireless Basics s ...
-
D-Link DWL_7100 - page 45
45 7. Resetting the DWL-7100AP to Factory Default Settings After you have tried other methods for troubleshooting your network, you may choose to Reset the DWL-7100AP to the factory default settings. T o hard-reset the D-Link DWL-7100AP to factory default settings, please do the following: T roubleshooting (continued) Locate the Res ...
-
D-Link DWL_7100 - page 46
46 Standards IEEE 802. 1 1g IEEE 802.1 1b IEEE 802.1 1a IEEE 802.3 IEEE 802.3u Device Management Network Architecture Supports Infrastructure Mode LEDs Power WA N LAN (10/100) WLAN - 802.1 1a, 802.1 1g Wireless Operating Range* Indoors – up to 328 feet (100 meters) Outdoors – up to 1,312 feet (400 meters) T emperature Operating: 32ºF to 149ºF ...
-
D-Link DWL_7100 - page 47
47 Safety and Emissions: FCC CE CSA Physical Dimensions: L = 7.6 inches (193mm) W = 5.5 inches (140mm) H = 1.2 inches (31mm) T echnical Specifications (continued) Wireless Dat a Rates with Automatic Fallback: Security: 64-, 128-, 152-bit WEP (Wired Equivalent Privacy) WP A - W i-Fi Protected Access (64,128-bit WEP with TKIP ...
-
D-Link DWL_7100 - page 48
48 Media Access Control: CSMA/CA with ACK Wireless T ransmit Power: 15dBm(32mW) ±2dB Power Adapter: Ext. Power Supply DC 5V , 2.0A 100-120V ~ 50-60Hz Weight: 0.62 lbs (280g) Receiver Sensitivity: 54Mbps OFDM, 10% PER,-73dBm 48Mbps OFDM, 10% PER,-76dBm 36Mbps OFDM, 10% PER,-82dBm 24Mbps OFDM, 10% PER,-85dBm 18Mbps OFDM, 10% PER,-88dBm 12Mbps OFDM, ...
-
D-Link DWL_7100 - page 49
49 T echnical Support Y ou can find sof tware updates and user documentation on the D-Link website. D-Link provides free technical support for customers within the United S tates and within Canada for the duration of the warranty period on this product. U.S. and Canadian customers can contact D-Link technical support through our website, or by phon ...
-
D-Link DWL_7100 - page 50
50 Subject to the terms and conditions set forth herein, D-Link Systems, Inc. (“D-Link”) provides this Limited warranty for its product only to the person or entity that originally purchased the product from: • D-Link or its authorized reseller or distributor and • Products purchased and delivered within the fif ty st ates of the United S t ...
-
D-Link DWL_7100 - page 51
51 • The customer must submit with the product as part of the claim a written description of the Hardware defect or Software nonconformance in sufficient detail to allow D-Link to confirm the same. • The original product owner must obtain a Return Material Authorization (“RMA”) number from the Authorized D-Link Service Office and, if reques ...
-
D-Link DWL_7100 - page 52
52 Governing Law : This Limited W arranty shall be governed by the laws of the S tate of California. Some states do not allow exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the foregoing limit ations and exclusions may not apply . This limited warranty provides specific legal ...
У вас вопрос, касающийся D-Link DWL_7100?
Воспользуйтесь формуляром, находящимся ниже
Если с помощью найденной инструкции Вы не решили свою проблему с D-Link DWL_7100, задайте вопрос, заполнив следующий формуляр. Если у какого то из пользователей была похожая проблема с D-Link DWL_7100 со всей вероятностью он захочет поделиться методом ее решения.