Инструкция обслуживания Universal CLP-100NI-NPRT

45 страниц 1.7 mb
Скачать

Перейти на страницу of 45

Summary
  • Universal CLP-100NI-NPRT - page 1

    1 INSTALLATION - OPERATION - MAINTENANCE OWNER’S MANUAL NON-POROUS CONVEYOR LINE PRINTERS ALL MODELS UNIVERSAL STENCILING & MARKING SYSTEMS, INC. P .O. BOX 871 - ST . PETERSBURG , FLORIDA 33731 USA PH: (727) 894-3027 F AX: (727) 821-7944 E-Mail: sales@universal-marking.com Website: www.universal-marking.com STENCILING & MARKING SYSTEMS NP ...

  • Universal CLP-100NI-NPRT - page 2

    2 IMPOR T ANT NOTE UNIVERSAL products are manufactured to exacting standards and every available step has been taken to assure your complete satisfaction. It is most important, for best results, that you read and carefully follow the instructions contained in this manual. Failure to do so may result in unsatisfactory performance, damage to the equi ...

  • Universal CLP-100NI-NPRT - page 3

    3 Printing on non-porous materials has always been a major problem in industrial applications. The high degree of maintenance required to keep conventional coders operating with solvent based inks has made many compa- nies opt for manual marking as a cost effective alternative. With UNIVERSAL Non-Porous Coders, printing on non-porous materials can ...

  • Universal CLP-100NI-NPRT - page 4

    4 SPECIFICA TIONS NET WEIGHT : 10 LBS. - 12 OZS. (4.88 KG .) MAXIMUM DIE SIZE - US ST ANDARD: 7/8” (7 RIBS) X 16-15/16” LENGTH MAXIMUM DIE SIZE - METRIC CODERS ONL Y : 23.8 MM (7 RIBS) X 430.2 MM LENGTH PRINT DRUM CIRCUMFERENCE: APPROXIMA TEL Y 18" (457 MM) MEASURED A T DIE F ACE CONVEYOR LINE PRINTER SPECIFICA TIONS TOP MOUNT SERIES Model ...

  • Universal CLP-100NI-NPRT - page 5

    5 SPECIFICA TIONS CONVEYOR LINE PRINTER SPECIFICA TIONS SIDE MOUNT SERIES Model Shown: CLP-200NI-NPLS NET WEIGHT : 1 1 LBS. -5 OZS. (5.13 KG .) MAXIMUM DIE SIZE - US ST ANDARD: 1-7/8” (14 RIBS) X 16-15/16” LENGTH MAXIMUM DIE SIZE - METRIC CODERS ONL Y : 49.2 MM (13 RIBS) X 430.2 MM LENGTH PRINT DRUM CIRCUMFERENCE: APPROXIMA TEL Y 18" (457 ...

  • Universal CLP-100NI-NPRT - page 6

    6 SPECIFICA TIONS INDEXING AND NON-INDEXING MODELS Universal Non-Porous Conveyor Line Printers are available in both indexing and non-indexing models. Indexing coders contain a print drum spring return mechanism which provides print registration capabilities when carton printing (see Figure 1). As the trailing edge of a carton passes the coder , th ...

  • Universal CLP-100NI-NPRT - page 7

    7 SPECIFICA TIONS FIGURE 4 FRICTION BEARER .007” - .008” PRINTING DIE DRUM COVER FIGURE 5 RIBtype® PRINTING DIES CODER MODELS DESIGNED FOR METRIC RIBtype® PRINTING DIES Printing dies are manufactured to precision thickness tol- erances which are very critical to the performance of these coders. When installed, the face of the printing die sho ...

  • Universal CLP-100NI-NPRT - page 8

    8 SPECIFICA TIONS INK ROLLS Universal offers two ink roll options for the Non-Porous Conveyor Line Printers each with unique characteristics which will help determine the suitability for a specific printing application. The coders are designed to accommo- date both types of ink rolls without modification. A detailed review of your printing requirem ...

  • Universal CLP-100NI-NPRT - page 9

    9 QUICK ST AR T INST ALLING THE INKING SYSTEM ASSEMBL Y Y our new Non-Porous Conveyor Line Printer was fully assembled and adjusted at the factory before final inspec- tion. In order to minimize the size of the shipping cartons used to package these machines, the Non-Porous Inking System Assembly was removed from the Pivot Arm and must be reinstall ...

  • Universal CLP-100NI-NPRT - page 10

    10 QUICK ST AR T 2 - Loosen the Knurled Pivot Arm Knob “C” & swing the Inking System Assembly “A” away from Print Drum. INST ALLING THE PRE-INKED ROLL 5 - Press the Inking System Assembly towards the Print Drum and adjust the Position Adjusting Screw “F” until the Knurled Drive Wheel “G” makes positive contact with the Friction ...

  • Universal CLP-100NI-NPRT - page 11

    11 QUICK ST AR T 6 -Carefully pull the Inking System Cover “L” directly away from the Inking System Baseplate “M”. Do not let the cover drag across the surface of the T ransfer Roller “N”. 3 -While holding the Knurled Drive Wheel Cover “J” in place, re- move the Knurled Cover Retaining Knob “K” by turning it counter- clockwise . ...

  • Universal CLP-100NI-NPRT - page 12

    12 QUICK ST AR T 10 - Immediately replace the Inking System Cover “L” by care- fully guiding the cover over the T ransfer Roll “N”. T ry not to let the cover cont act the surface of the T ransfer Roll to pre- vent scratching. Make sure the Cover is seated properly against Baseplate “M”. 7 -Put on a pair of rubber gloves and remove the p ...

  • Universal CLP-100NI-NPRT - page 13

    13 QUICK ST AR T 13 - Replace the Knurled Cover Retaining Knob “K” and lightly tighten. Do not over tighten this knob or you may bend the top of the Knurled Drive Wheel Cover “J” and cause it to bind against the Knurled Drive Wheel. Now retighten the Pivot Arm Knurled Knob. 1 1 -Replace the Knurled Drive Wheel “G” by aligning the 3 smal ...

  • Universal CLP-100NI-NPRT - page 14

    14 QUICK ST AR T 2 - When using the smaller individual characters to make up a code message, use the T ype Blocking Kit “Q” in- cluded with your coder to support the leading and trail- ing ends of the type as shown. 1 - Align the ribbed backing on the Printing Dies “P” with the mating drum covering on the Print Drum “D” and press firmly ...

  • Universal CLP-100NI-NPRT - page 15

    15 QUICK ST AR T FOR MOUNTING INSTRUCTIONS REFER TO THE APPROPRIA TE SECTION FOR YOUR APPLICA TION WEB PRINTING - P AGE 19 CARTON PRINTING - P AGE 23 ADJUSTING THE INK ROLL ECCENTRIC As soon as you can see complete ink coverage on the die faces, stop rotating the eccentric. Proper adjustment will normally be reached when the reference line on the E ...

  • Universal CLP-100NI-NPRT - page 16

    16 BASIC PRINCIPLES OF OPERA TION Note: The MT Ink Roll is disposable by design and is not to be used with the 4 oz. ink cartridge. When the ink is depleted from the MT Ink rolls they are to be discarded. NON-POROUS INKING SYSTEM Inks designed for printing on non-porous surfaces contain very fast drying alcohol solvents, a component to impart color ...

  • Universal CLP-100NI-NPRT - page 17

    17 BASIC PRINCIPLES OF OPERA TION It is also extremely important to test the affect of other manufacturer ’s ink on the XF Neoprene ink roll. Since the ink roll must fit into a precision machined cavity in the inking system housing with little clearance, swelling of the roll, in reaction to non-compatible solvents in the ink, could cause serious ...

  • Universal CLP-100NI-NPRT - page 18

    18 BASIC PRINCIPLES OF OPERA TION When the coder is installed on a Form and Fill machine, the plastic film may move at fairly high speed when pulled from the supply roll but it stops for a period of time during the product fill cycle. In these applications, if the die face has already rotated passed the T ransfer Roll and picked up ink and the web ...

  • Universal CLP-100NI-NPRT - page 19

    19 WEB PRINTING T o eliminate this problem, if idler roller positions are not adjustable, a slight undercut in the face of idler roller “B” where the printed marks pass under the roll, will prevent the wet marks from touching the face of the idler . Generally the undercut in the idler roller needs to be only .020" - .030" deep and sli ...

  • Universal CLP-100NI-NPRT - page 20

    20 WEB PRINTING 3 -Press down lightly on the spring tension arm to compress the tension spring slightly . (Fig- ure 35) While holding a light pressure on the arm, tighten the mounting bracket clamping screw . This procedure is used to adjust the contact pres- sure which the print drum exerts against the web. Only enough pressure should be applied t ...

  • Universal CLP-100NI-NPRT - page 21

    21 WEB PRINTING Universal Non-Porous Conveyor Line Printers can also be mounted on custom designed extension arms which will enable them to print directly on the surface of a master roll of web material as it is unwound. This technique is fre- quently used when conveniently positioned idler rolls are not available. In these applications, as the mas ...

  • Universal CLP-100NI-NPRT - page 22

    22 WEB PRINTING In web printing applications where multiple coders are required to be mounted across the web, Universal offers special mounting hardware which facilitates gang mounting the coders as indicated in Figure 38. In these instal- lations, special CLP-SBA Saddle Mount Bracket Assemblies are used in conjunction with an extruded structural a ...

  • Universal CLP-100NI-NPRT - page 23

    23 CART ON PRINTING Universal Non-Porous Conveyor Line Printers are spring loaded so that the print drums will press against the carton surface on contact. This pressure is necessary to accomplish the friction drive rotation of the print drum and ensure enough printing pressure to give you a sharp impression. The spring tension mechanism on the cod ...

  • Universal CLP-100NI-NPRT - page 24

    24 CART ON PRINTING Before tightening the mounting bolts, check alignment of the print drum. It is very important for proper tracking that the top of the print drum is parallel to the top of the conveyor (Figure 41) and the side of the print drum is parallel to the side of the carton (Figure 42). Once this alignment has been achieved, tighten the m ...

  • Universal CLP-100NI-NPRT - page 25

    25 CART ON PRINTING Figure 45 illustrates the best die position for carton printing when using extremely fast drying inks. Note that the leading edge of the printing die should be positioned rotationally upstream of the transfer roll. When the leading edge of the carton contacts the print drum, the drum begins to rotate in a clockwise direction. Th ...

  • Universal CLP-100NI-NPRT - page 26

    26 CART ON PRINTING If the cycle rate of the production line is very fast and the ambient temperature is relatively low , the printing dies could be positioned rotationally downstream of the transfer roll so they print much closer to the leading edge of the carton. When the coder completes one printing cycle, a portion of the die or all of the die ...

  • Universal CLP-100NI-NPRT - page 27

    27 MAINTENANCE 3 - Inspect the roll to ensure it is completely saturated with ink but not dripping wet. If the surface of the roll seems excessively wet after inking, remove the excess ink by in- serting a rod through the core and while pressing down lightly , roll the roller across a clean piece of paper . PRE-INKING A NEW INK ROLL When you are re ...

  • Universal CLP-100NI-NPRT - page 28

    28 MAINTENANCE 1 - Periodically , the inking system should be disas- sembled and inspected for ink residue and dust con- t amination. T o remove ink cont amination from the surface of the machine, moisten a soft cotton cloth with the appropriate ink solvent and rub it across the contaminated area. CLEANING THE TRANSFER ROLL The surface of the trans ...

  • Universal CLP-100NI-NPRT - page 29

    29 MAINTENANCE 3 - Blot the surface of the die with a clean paper towel to dry as shown in and reinst all the clean dies on the coder . CLEANING THE PRINTING DIES 1 - Place the contaminated Printing Die on top of several lay- ers of paper towels to absorb the excess solvent. Pour just enough solvent on the face of the die to cover the die face. 2 - ...

  • Universal CLP-100NI-NPRT - page 30

    30 MAINTENANCE Mounting configuration conversion involves the “mirror image” reversal of the pivot arm assembly that holds the inking system and the tension arm assembly which provides the printing pressure. Indexing printers require the additional reversal of the index ramp and repositioning of the index ring. Universal Non-Porous CLP Coders a ...

  • Universal CLP-100NI-NPRT - page 31

    31 1- Loosen the Lock Nut and screw the Adjusting Bolt in to relieve the spring pressure (Figure 56). 2- Remove the spring by lifting the end off the Locating Button. 3- Remove the Adjusting Bolt and replace it on the opposite side of the T ension Arm. 4- Remove the Spring Cup and replace it on the opposite side of the T ension Arm. 5- Replace the ...

  • Universal CLP-100NI-NPRT - page 32

    32 MAINTENANCE PRINT DRUM INDEX MECHANISM CONVERSION 1- Using a 5/64” hex wrench, loosen the Nylon Tip Set Screw located in the top rim of the Print Drum. 2- Remove the Print Drum Dust Cover . 3- T o relieve the spring tension on the index mechanism, ro- tate the Print Drum approximately 3/4 turn. The Index Com- pression Springs will now be in th ...

  • Universal CLP-100NI-NPRT - page 33

    33 7- Retighten the Brass Tipped Set Screw to lock the Index Ring in position. This screw must be tight to prevent the Index Ring from rotating under spring tension. 6- Rotate the Index Ring in a clockwise direction until it stops turning. Next, turn the Index Ring in the counterclockwise direction as necessary until the Brass Tip Set Screw is poin ...

  • Universal CLP-100NI-NPRT - page 34

    34 MAINTENANCE 8- Reinstall the Index Ramp in the proper orientation for your mounting configuration as shown in Figures 64 & 65. 1- T o replace Print Drum Index Springs, rotate the Print Drum approximately 3/4 turn to relieve spring tension as shown in Figure 59, Page 32. REPLACING PRINT DRUM INDEX SPRINGS 2- Using a small screwdriver , remove ...

  • Universal CLP-100NI-NPRT - page 35

    35 MAINTENANCE REMOVING AND REPLACING INDEX BLOCK “B” 1- T o remove Index Block “B” from the Print Drum, roll down the Drum Cover directly behind the Index Block to expose the Index Assembly Mounting Screw . Using a screw driver , turn the Mounting Screw in a clockwise direction until the Index Block becomes loose and can be removed. 4- Hol ...

  • Universal CLP-100NI-NPRT - page 36

    36 MAINTENANCE 4- While holding Index Block “B” in this position, tighten the Index Assembly Mounting Screw by turning it counterclock- wise until tight. FIGURE 73 FIGURE 71 3- When replacing Index Block “B” it is very important to align the top surface of the Index Block with the top surface of the Index Ring as shown in Figure 72. Before ...

  • Universal CLP-100NI-NPRT - page 37

    37 MAINTENANCE INKING SYSTEM ASSEMBL Y The following steps will guide you through the Ink Roll Eccentric Assembly . 1 - Install the O-Ring in the groove of the Eccentric flange, then install one of the white delrin washers on the Eccen- tric. FIGURE 74 FIGURE 75 FIGURE 76 FIGURE 77 2 - Apply a thin coating of grease to the O-Ring and the Ec- centri ...

  • Universal CLP-100NI-NPRT - page 38

    38 When adequate pressure is applied to the Eccentric Knob dur- ing assembly , the knob should have a moderate resistance to turning. When assembled properly , the ink roller axle should be feel rigid. MAINTENANCE 5 - Install the Eccentric Knurled Knob and align the engraved line on the knob with the “MAX” line on the Inking System Cover . Set ...

  • Universal CLP-100NI-NPRT - page 39

    39 NON-POROUS CONVEYOR LINE PRINTER CE GUARD ASSEMBL Y CLP-100 & CLP-200 SERIES 6 5 4 3 2 1 NON-POROUS CONVEYOR LINE PRINTER CE GUARD ASSEMBL Y P ARTS LIST 1 2 3 4 5 6 CF-32 1 SCREW , 5/16-18 X 1/2” SHC 1 4 1 1 1 NP-23 MS-36 NP-70 NP-72 NP-73 NP-71 SCREW , 1/4-20 X 1/2” SHC SCREW , 8-32 X 1/2” SHC MOUNTING ARM, CLP CE GUARD TOP PLA TE, #1 ...

  • Universal CLP-100NI-NPRT - page 40

    40 NON-POROUS CONVEYOR LINE PRINTER CLP-100 & CLP-200 SERIES 1 2 29 28 27 3 4 7 8 9 6 5 26 25 23 24 23 14 15 13 16 10 11 12 18 17 22 21 20 19 ...

  • Universal CLP-100NI-NPRT - page 41

    41 KEY NO. 1 2 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 NON-POROUS CONVEYOR LINE PRINTER P AR TS LIST DESCRIPTION QTY . REQD. P AR T NUMBER CLP-100NI-NP-PDA 3 1 2 1 1 1 1 1 1 1 1 1 1 CW-01 CF-13 CLP-100NP-PDA CLP-200NI-NP-PDA CLP-200NP-PDA CLP-200NI-NP-PDA-T CF-04 CM-13 CLP-100NI-NP-PDA-T CLP-100NP-PDA-T CLP-200NP-PDA ...

  • Universal CLP-100NI-NPRT - page 42

    42 NON-POROUS CONVEYOR LINE PRINTER INKING SYSTEMS CLP-100 & CLP-200 SERIES 1 2 3 4 5 20 19 18 17 6 7 8 9 10 11 12 13 14 15 16 ...

  • Universal CLP-100NI-NPRT - page 43

    43 NON-POROUS CONVEYOR LINE PRINTER INKING SYSTEM P AR TS LIST 1 2 4 5 6 3 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 NP-17 NP-16 NP-15 NP-14 NP-01-CS NP-01-CT NP-02-CS NP-02-CT NP-TRA-1 NP-TRA-2 NP-05 NP-06 HP-04 NP-03 NP-31 NP-23 NP-24 NP-XC1 NP-XC2 NP-21 NP-07 NP-08 NP-20C NP-29 1 7 8 9 10 11 12 13 14 15 16 17 COVER RET AING KNOB DRIVE WHEEL COVER DELRIN W ...

  • Universal CLP-100NI-NPRT - page 44

    44 NON-POROUS CONVEYOR LINE PRINTER PRINT DRUM ASSEMBL Y CLP-100 & CLP-200 SERIES NON-POROUS CONVEYOR LINE PRINTER PRINT DRUM ASSEMBL Y P ARTS LIST 1 CO-02S 2 FRICTION BEARER RING - SQUARE CUT 4 2 3 1 1 2 CLP-BL1 CLP-BL2 CLP-BL1T CLP-BL2T CB-04 CLP-100 NON-INDEXING PRINT DRUM (W-CB-04 PRINT DRUM BEARINGS) PRINT DRUM BEARING KEY NO. DESCRIPTION ...

  • Universal CLP-100NI-NPRT - page 45

    45 NON-POROUS CONVEYOR LINE PRINTER INDEX ASSEMBL Y CLP-100 & CLP-200 SERIES 1 2 3 4 5 6 7 8 9 10 11 1 CF-28 2 SNAP RING KEY NO. DESCRIPTION QTY . REQD. P ART NUMBER NON-POROUS CONVEYOR LINE PRINTER INDEX ASSEMBL Y P ARTS LIST 2 3 4 5 6 7 8 9 10 11 CLP-IA CLP-IB CF-27 CS-07 CLP-IC CM-34 CF-29 CLP-IP CLP-IR2 CF-04 1 1 1 2 1 1 2 1 1 1 INDEX ASSEM ...

Производитель Universal Категория Printer

Документы, которые мы получаем от производителя устройства Universal CLP-100NI-NPRT мы можем разделить на несколько групп. Это в частности:
- технические чертежи Universal
- инструкции обслуживания CLP-100NI-NPRT
- паспорта изделия Universal
- информационные брошюры
- энергетические этикетки Universal CLP-100NI-NPRT
Все из них важны, однако самую важную информацию с точки зрения пользователя мы найдем в инструкции обслуживания Universal CLP-100NI-NPRT.

Группа документов, определяемая как инструкции обслуживания, делится также на более подробные типы, такие как: Инструкции монтажа Universal CLP-100NI-NPRT, инструкции обслуживания, короткие инструкции или инструкции пользователя Universal CLP-100NI-NPRT. В зависимости от потребностей, Вам необходимо поискать требуемый документ. На нашем сайте Вы можете просмотреть самую популярную инструкцию использования изделия Universal CLP-100NI-NPRT.

Похожие инструкции обслуживания

Полная инструкция обслуживания устройства Universal CLP-100NI-NPRT, как должна выглядеть?
Инструкция обслуживания, определяемая также как пособие пользователя, или просто "руководство" - это технический документ, цель которого заключается в использовании Universal CLP-100NI-NPRT пользователями. Инструкции пишет, как правило технический писатель, языком, доступным для всех пользователей Universal CLP-100NI-NPRT.

Полная инструкция обслуживания Universal, должна заключать несколько основных элементов. Часть из них менее важная, как например: обложка / титульный лист или авторские страницы. Однако остальная часть, должна дать нам важную с точки зрения пользователя информацию.

1. Вступление и рекомендации, как пользоваться инструкцией Universal CLP-100NI-NPRT - В начале каждой инструкции, необходимо найти указания, как пользоваться данным пособием. Здесь должна находится информация, касающаяся местонахождения содержания Universal CLP-100NI-NPRT, FAQ и самых распространенных проблем - то есть мест, которые чаще всего ищут пользователи в каждой инструкции обслуживания
2. Содержание - индекс всех советов, касающихся Universal CLP-100NI-NPRT, которое найдем в данном документе
3. Советы по использованию основных функций устройства Universal CLP-100NI-NPRT - которые должны облегчить нам первые шаги во время использования Universal CLP-100NI-NPRT
4. Troubleshooting - систематизированный ряд действия, который поможет нам диагностировать а в дальнейшем очередность решения важнейших проблем Universal CLP-100NI-NPRT
5. FAQ - чаще всего задаваемые вопросы
6. Контактные данные Информация о том, где искать контактные данные производителя / сервисного центра Universal CLP-100NI-NPRT в данной стране, если самостоятельно не получится решить проблему.

У вас вопрос, касающийся Universal CLP-100NI-NPRT?

Воспользуйтесь формуляром, находящимся ниже

Если с помощью найденной инструкции Вы не решили свою проблему с Universal CLP-100NI-NPRT, задайте вопрос, заполнив следующий формуляр. Если у какого то из пользователей была похожая проблема с Universal CLP-100NI-NPRT со всей вероятностью он захочет поделиться методом ее решения.

Перепишите текст с картинки

Комментарии (0)