-
Ubiquiti Networks PBE-M5-400 - page 1
High-Performance Integrated InnerFeed ™ airMAX ® Bridge Models: PBE-M2-400, PBE-M5-400 ...
-
Ubiquiti Networks PBE-M5-400 - page 2
Introduction Thank you for purchasing the Ubiquiti Netw orks® PowerBeam ™ . This Quick Start Guide is designed to guide you through the installation, and show you how to access the airOS® Configuration Interface. This Quick Start Guide also includes the warranty terms and is for use with the PowerBeamM2, model PBE-M2-400, and the PowerBeamM5, m ...
-
Ubiquiti Networks PBE-M5-400 - page 3
Hardware Overview Bottom View Cable Door Rear Housing T echnology Ethernet Port Release Button Slot Dish Bracket Release Button Dish Reflector Alignment Pins Reset Button Antenna Feed Antenna F eed The Pow erBeamM2 Antenna Feed is shown; however , the PowerBeamM5 Antenna F eed has the same layout for the Ethernet Port , Reset button, and Release bu ...
-
Ubiquiti Networks PBE-M5-400 - page 4
Release Button After you assemble the Po werBeam, check the Release button; it should be fully engaged in the Release Button Slot of the Rear Housing . This ensures that the Antenna Feed is locked into place . I f you need to remove the Antenna Feed , you must depr ess the Release button first. LEDs Signal In airOS, you can modify the wireless sign ...
-
Ubiquiti Networks PBE-M5-400 - page 5
Application Examples The Pow erBeam mounted outdoors with the Dish Reflector installed provides directional outdoor cover age (gain is reflector-dependent). The Pow erBeam mounted outdoors without the Dish Reflector installed provides outdoor-to-indoor cov erage using the 3 dBi Antenna Feed only . Installation Requirements • 13 mm wrench • Shie ...
-
Ubiquiti Networks PBE-M5-400 - page 6
Installation The installation instructions show the PowerBeamM2; however , the same instructions apply to the PowerBeamM5. 1. Align and insert the tabs of the Dish Bracket into the slots of the Dish Reflector . Rotate the Dish Bracket counter-clockwise until the tabs lock into place. 20 10 10 0 2. Line up the Alignment Pins of the Rear Housing with ...
-
Ubiquiti Networks PBE-M5-400 - page 7
3. Push in the sides of the Cable Door and detach it from the Rear Housing . 20 10 0 10 4. Attach the Antenna Feed : a. I nsert the Antenna Feed into the Rear Housing , and push until it locks into place with a click. b. Lightly pull the Antenna Feed to ensure that it is locked into place and the Release button is fully engaged. Release Button Bott ...
-
Ubiquiti Networks PBE-M5-400 - page 8
5. Connect the Ethernet cable: a. Connect an Ethe rnet cable to the Ethernet Port of the Antenna Feed . b. Re-attach the Cable Door to the Rear Housing . 20 10 0 10 6. Slide the Pole Clamp onto the Dish Brack et . 20 10 10 0 ...
-
Ubiquiti Networks PBE-M5-400 - page 9
7. Insert the U-Bolt into the Pole Clamp and Dish Brack et . Secure each end of the U-Bolt with a Flange Nut. 20 10 10 0 25 N-m Note: The mounting assembly can accommodate a Ø 32 - 56 mm pole. 8. Optional: If you ha ve the PowerBeam Radome (optional accessory), then align the arrows on the bottoms of the Radome and Dish Reflector so the Drain Hole ...
-
Ubiquiti Networks PBE-M5-400 - page 10
9. Connect the other end of the Ethernet cable from the PowerBeam t o the Ethernet por t labeled POE on the PoEAdapter . 10. Connect an Ethernet cable from your LAN or computer to the Ethernet port labeled LAN on the PoE Adapter . 11. Connect the Power Cord to the pow er por t on the PoE Adapter . Connect the other end of the Power C ord to a po ...
-
Ubiquiti Networks PBE-M5-400 - page 11
Accessing airOS Verify c onnectivity in the airOS Configuration Interface. 1. Make sure that your host machine is connected via Ethernet to the Po werBeam. 2. Configure the Ethernet adapter on your host syst em with a static IP address on the 192.168.1.x subnet. 3. Launch your web browser and type https://192.168.1.20 in the address field. P ress e ...
-
Ubiquiti Networks PBE-M5-400 - page 12
5. Select the PowerBeam Dish Reflector size: a. Click the Wireless tab. b. F rom the Antenna drop-do wn list, selec t the appropriate option. c. Click Change to save. d. Click OK to confirm. Customize additional settings as needed to complet e the configuration. F or additional details on the airOS Configuration Interface, refer t o the User Guide ...
-
Ubiquiti Networks PBE-M5-400 - page 13
Installer Compliance Responsibility Devices must be professionally installed and it is the professional installer's responsibility to make sure the device is operated within local country regulatory requirements. Since Ubiquiti Networks equipment can be paired with a variety of antennas and cables, the Antenna and Output Po wer fields are prov ...
-
Ubiquiti Networks PBE-M5-400 - page 14
Specifications PowerBeam Dimensions PBE-M2-400 PBE-M5-400 420 x 420 x 289 mm (16.54 x 16.54 x 11.38") 420 x 420 x 275 mm (16.54 x 16.54 x 10.83") Weight (Mount Included) PBE-M2-400 PBE-M5-400 1.795 kg (4.809 lb) 1.753 kg (4.789 lb) Operating Frequency PBE-M2-400 PBE-M5-400 2405 - 2475 MHz Worldwide: 5170 - 5875 MHz USA: 5725 - 5850 MHz Ga ...
-
Ubiquiti Networks PBE-M5-400 - page 15
Safety Notices 1. Read, follow , and keep these instructions. 2. Heed all warnings. 3. Only use attachments/accessories specified by the manufacturer . W ARNING: Do not use this product in location that can be submerged by water . W ARNING: Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightn ...
-
Ubiquiti Networks PBE-M5-400 - page 16
Limited W arranty UBIQUITI NETWORKS, Inc (“UBIQUITI NET WORKS”) warrants that the product(s) furnished hereunder (the “Product(s)”) shall be free from defects in material and workmanship for a period of one (1) year from the date of shipment by UBIQUITI NETWORKS under normal use and operation. UBIQUITI NETWORKS’ sole and exclusive obligat ...
-
Ubiquiti Networks PBE-M5-400 - page 17
Disclaimer EXCEPT FOR ANY EXPRESS W ARRANTIES PROVIDED HEREIN, UBIQUITI NETWORKS, ITS AFFILIATES, AND IT S AND THEIR THIRD P ART Y DA T A, SERVICE, SOFTWARE AND HARDW ARE PROVIDERS HEREBY DISCLAIM AND MAKE NO OTHER REPRESENT A TION OR WARRANTY OF ANY KIND, EXPRESS, IMPLIED OR ST A TUTORY , INCLUDING, BUT NO T LIMITED TO, REPRESENT A TIONS, GUARANTE ...
-
Ubiquiti Networks PBE-M5-400 - page 18
Note Some countries, states and provinces do not allo w exclusions of implied warranties or conditions, so the abov e exclusion may not apply to you . Y ou may have other rights that vary from country to country, state to state, or province t o province. Some countries , states and provinces do not allow the exclusion or limitation of liability for ...
-
Ubiquiti Networks PBE-M5-400 - page 19
Industry Canada This Class B digital apparatus complies with Canadian CAN ICES-3(B). T o reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r .p.) is not more than that permitted for successful communication. This device complies with Industry C ...
-
Ubiquiti Networks PBE-M5-400 - page 20
RoHS/WEEE Compliance Statement English European Directive 2002/96/EC requires that the equipment bearing this symbol on the product and/or its packaging must not be disposed of with unsorted municipal waste. The symbol indicates that this product should be disposed of separately from regular household waste streams. It is your responsibility to dis ...
-
Ubiquiti Networks PBE-M5-400 - page 21
Español La Directiva 2002/96/CE de la UE exige que los equipos que lleven este símbolo en el propio aparato y/o en su embalaje no deben eliminarse junto con otros residuos urbanos no seleccionados. El símbolo indica que el producto en cuestión debe separarse de los residuos domésticos convencionales con vistas a su eliminación. Es responsabil ...
-
Ubiquiti Networks PBE-M5-400 - page 22
Declaration of Conformity Česky [Czech] UBIQUITI NET WORKS tímto prohla uje, e tento UBIQUITI NETWORKS device, je ve shod se základními po adavky a dal ími p íslu n mi ustanoveními sm rnice 1999/5/ES. Dansk [Danish] Undertegnede UBIQUITI NET WORKS erklærer herved, at følgende udstyr UBIQUITI NET WORKS device, overholder de væsentlige krav ...
-
Ubiquiti Networks PBE-M5-400 - page 23
Italiano [Italian] Con la presente UBIQUITI NETWORKS dichiara che questo UBIQUITI NET WORKS device, è conforme ai requisiti essenziali ed alle altr e disposizioni pertinenti stabilite dalla direttiva 1999/5/CE. Latviski [Latvian] Ar o UBIQUITI NETWORKS dek lar , ka UBIQUITI NET WORKS device, atbilst Direkt vas 1999/5/EK b tiskaj m pras b m un citi ...
-
Ubiquiti Networks PBE-M5-400 - page 24
www .ubnt.com ©2012-2014 Ubiquiti Networks, Inc. All rights reserved. Ubiquiti, Ubiquiti Networks, the Ubiquiti U logo, the Ubiquiti beam logo , airMAX, airOS, InnerFeed, P owerBeam, and TOUGHCable are trademarks or registered trademarks of UbiquitiNetworks, Inc. in the United States and in other countries. All other trademarks are the prope ...
У вас вопрос, касающийся Ubiquiti Networks PBE-M5-400?
Воспользуйтесь формуляром, находящимся ниже
Если с помощью найденной инструкции Вы не решили свою проблему с Ubiquiti Networks PBE-M5-400, задайте вопрос, заполнив следующий формуляр. Если у какого то из пользователей была похожая проблема с Ubiquiti Networks PBE-M5-400 со всей вероятностью он захочет поделиться методом ее решения.