Русский dropdown-ico

Инструкция обслуживания HP (Hewlett-Packard) 72H3482

41 страниц 0.11 mb
Скачать

Перейти на страницу of 41

Summary
  • HP (Hewlett-Packard) 72H3482 - page 1

    T urbo16/4 T oken Ring Network ISA Adapter 72H3482 Installation Guide ...

  • HP (Hewlett-Packard) 72H3482 - page 2

    Notice The information contained in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be liable for errors contained herein or for incid ...

  • HP (Hewlett-Packard) 72H3482 - page 3

    1 Connecting to a Netware 3.12 Server Windows for Workgroups 1 Connecting to a Netware 3.12 Server Windows for Workgroups Requirements • HP Vectra VL8 with Windows for Workgroups 3.11 installed. • IBM Auto 16/4 TR adapter and drivers diskettes ver 2.20 Driver Name: IBMTOK.DOS Size: 18KB Date: 6/13/96] • Microsoft Windows for Workgroups 3.11 m ...

  • HP (Hewlett-Packard) 72H3482 - page 4

    1 Connecting to a Netware 3.12 Server Windows for Workgroups ❒ NetWare Client-32 ❒ NetBIOS ❒ IEEE 802.2 8 Select the Continue button. 9 At the “IBM LAN Client Configuration” screen, use the defaults and select the Install button. 10 Insert disks 2 – 4 when prompted. 11 When you have received notification that the installation has comple ...

  • HP (Hewlett-Packard) 72H3482 - page 5

    1 Connecting to a Netware 3.12 Server Windows 95 SR2 Windows 95 SR2 Requirements • HP Vectra with Windows 95 SR2 installed. • IBM Auto 16/4 TR adapter and drivers diskettes ver 2.1 Driver Name: NETIBM4.INF Size: 30KB Date: 1/30/98 • Microsoft Windows 95 SR2 media. • Novell Netware 3.12 server that supports Net BEUI, NWLink IPX/SPX, and NWLi ...

  • HP (Hewlett-Packard) 72H3482 - page 6

    1 Connecting to a Netware 3.12 Server Windows 95 SR2 7 Reboot the machine and allow it to boot to Windows 95. 8 Windows 95 SR2 should automatically recognize the IBM Auto 16/4 TR adapter card. If you are using a Vectra VL8, go directly to step 9. If you are using a Vectra VE7/VE8, follow the instructions below to complete the installation. a Click ...

  • HP (Hewlett-Packard) 72H3482 - page 7

    1 Connecting to a Netware 3.12 Server Windows 95 SR2 “Workgroup”, and “Computer Description” and click on “OK.” (If you do not have a Computer name, Workgroup name and Computer description, contact your network administrator) 16 When prompted for your Windows 95 CD-ROM, click on “OK.” 17 Set the path to your Windows 95 files and cli ...

  • HP (Hewlett-Packard) 72H3482 - page 8

    1 Connecting to a Netware 3.12 Server Windows 95 SR2 ...

  • HP (Hewlett-Packard) 72H3482 - page 9

    2 Connecting to a Netware 4.11 Server Windows for Workgroups 2 Connecting to a Netware 4.11 Server Windows for Workgroups Requirements • HP Vectra VL8 with Windows for Workgroups 3.11 installed. • IBM Auto 16/4 TR adapter and drivers diskettes ver 2.20 Driver Name: IBMTOK.DOS Size: 18KB Date: 6/13/96 • Microsoft Windows for Workgroups 3.11 me ...

  • HP (Hewlett-Packard) 72H3482 - page 10

    2 Connecting to a Netware 4.11 Server Windows for Workgroups ❒ NetWare Client-32 ❒ NetBIOS ❒ IEEE 802.2 8 Select the Continue button. 9 At the “IBM LAN Client Configuration” screen, use the defaults and select the Install button. 10 Insert disks 2 – 4 when prompted. 11 When you have received notification that the installation has comple ...

  • HP (Hewlett-Packard) 72H3482 - page 11

    2 Connecting to a Netware 4.11 Server Windows 95 SR2 Windows 95 SR2 Requirements • HP Vectra with Windows 95 SR2 installed. • IBM Auto 16/4 TR adapter and drivers diskettes ver 2.1 Driver Name: NETIBM4.INF Size: 30KB Date: 1/30/98 • Microsoft Windows 95 SR2 media. • Novell Netware 4.1 server that supports Net BEUI, NWLink IPX/SPX, and NWLin ...

  • HP (Hewlett-Packard) 72H3482 - page 12

    2 Connecting to a Netware 4.11 Server Windows 95 SR2 7 Reboot the machine and allow it to boot to Windows 95. 8 Windows 95 SR2 should automatically recognize the IBM Auto 16/4 TR adapter card. If you are using a Vectra VE7/VE8, follow the instructions below to complete the procedure. If you are using a Vectra VL8, go directly to step 9. a Click on ...

  • HP (Hewlett-Packard) 72H3482 - page 13

    2 Connecting to a Netware 4.11 Server Windows 95 SR2 “Workgroup”, and “Computer Description” and click on “OK.” (If you do not have a Computer name, Workgroup name and Computer description, contact your network administrator) 16 When prompted for your Windows 95 CD-ROM, click on “OK.” 17 Set the path to your Windows 95 files and cli ...

  • HP (Hewlett-Packard) 72H3482 - page 14

    2 Connecting to a Netware 4.11 Server Windows 95 SR2 ...

  • HP (Hewlett-Packard) 72H3482 - page 15

    3 Connecting to a Windows NT 3.51 Server Windows for Workgroups 3 Connecting to a Windows NT 3.51 Server Windows for Workgroups Requirements • HP Vectra with Windows for Workgroups 3.11 installed. • IBM Auto 16/4 TR adapter and drivers diskettes ver 2.20 Driver Name: IBMTOK5.386 Size: 46K Date: 9/28/96 • Microsoft Windows for Workgroups 3.11 ...

  • HP (Hewlett-Packard) 72H3482 - page 16

    3 Connecting to a Windows NT 3.51 Server Windows for Workgroups 5 Type “/VIEW” and verify the settings as listed above under the heading “Device Configuration.” 6 Make any changes, exit LANAID, and remove the drivers diskette. 7 Reboot the machine to Windows, open the “NETWORK” folder, and double-click the “NETWORK SETUP” icon. 8 Se ...

  • HP (Hewlett-Packard) 72H3482 - page 17

    3 Connecting to a Windows NT 3.51 Server Windows for Workgroups 12 Select “IBM Turbo 16/4 Token-Ring ISA Adapter, NDIS2 only” and click on “OK.” 13 Accept the default “Network Drivers” and click on “Close.” ❒ IBM Token-Ring ISA Adapter, NDIS2 only [NDIS2] ❒ Microsoft NetBEUI ❒ IPX/SPX Compatible Transport with NetBIOS 14 At th ...

  • HP (Hewlett-Packard) 72H3482 - page 18

    3 Connecting to a Windows NT Server 3.51 Windows 95 SR2 Windows 95 SR2 Requirements • HP Vectra with Windows 95 SR2 installed. • IBM Auto 16/4 TR adapter and drivers diskettes ver 2.1 Driver Name: NETIBM4.INF Size: 30KB Date: 1/30/98 • Microsoft Windows 95 SR2 media. • Microsoft Windows NT 3.51 server that supports Net BEUI, NWLink IPX/ SPX ...

  • HP (Hewlett-Packard) 72H3482 - page 19

    3 Connecting to a Windows NT Server 3.51 Windows 95 SR2 10 When Windows 95 has loaded, click on “Start” then “Settings” and open the “Control Panel.” 11 Double-Click the “Network” icon and click on “Add.” 12 Select to add an “Adapter”, click on “Add” and then click on “Have Disk.” 13 In the “Install From Disk” wi ...

  • HP (Hewlett-Packard) 72H3482 - page 20

    3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version3.51 Windows NT Workstation Version3.51 Requirements • HP Vectra with Windows NT Workstation 3.51 installed. • IBM Turbo 16/4 TR adapter and drivers diskettes ver 2.1 Driver Name: IBMTOK5.SYS Size: 51KB Date: 9/28/96 • DOS and MS-Windows NT workstation 3.51 media. • Micr ...

  • HP (Hewlett-Packard) 72H3482 - page 21

    3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version3.51 10 Click on “YES” in the “Network Settings” dialog box, and NT Networking will be installed on your computer. 11 Insert the Windows NT Workstation CD. 12 In “Windows NT Setup”, set the path to your NT files and click on the “Continue” button. (If you have an ...

  • HP (Hewlett-Packard) 72H3482 - page 22

    3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version3.51 25 At the “Domain/Workgroup Settings” dialog box, click on “OK” to accept the default “Workgroup” as your workgroup name. (If you do not have the required information, contact your network administrator.) 26 To complete the installation, remove the floppy disk , ...

  • HP (Hewlett-Packard) 72H3482 - page 23

    3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version3.51 ...

  • HP (Hewlett-Packard) 72H3482 - page 24

    3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 4.0 Windows NT Workstation Version 4.0 Requirements • HP Vectra VL8 with Windows NT Workstation 4.0 installed. • IBM Turbo 16/4 TR adapter and drivers diskettes ver 2.1 Driver Name: IBMTOK5.SYS Size: 51KB Date: 9/28/96 • DOS and MS-Windows NT workstation 3.51/4.0 media. ? ...

  • HP (Hewlett-Packard) 72H3482 - page 25

    3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 4.0 10 In the Network Setup Wizard dialog box, make sure that “Wired to the Network” is checked and click on “Next”. 11 Click on “Select from list” and click on “Have Disk” and set path to “A:NT” (If you have a preloaded HDD, set path to “C:MastersLanDr ...

  • HP (Hewlett-Packard) 72H3482 - page 26

    4 Connecting to a Windows NT 4.0 Server Windows for Workgroups 4 Connecting to a Windows NT 4.0 Server Windows for Workgroups Requirements • HP Vectra with Windows for Workgroups 3.11 installed. • IBM Auto 16/4 TR adapter and drivers diskettes ver 2.1 Driver Name: IBMTOK5.386 Size: 46K Date: 9/28/96 • Microsoft Windows for Workgroups 3.11 med ...

  • HP (Hewlett-Packard) 72H3482 - page 27

    4 Connecting to a Windows NT 4.0 Server Windows for Workgroups 5 Type “/VIEW” and verify the settings as listed above under the heading “Device Configuration.” 6 Make any changes, exit LANAID, and remove the drivers diskette. 7 Reboot the machine to Windows, open the “NETWORK” folder, and double-click the “NETWORK SETUP” icon. 8 Sel ...

  • HP (Hewlett-Packard) 72H3482 - page 28

    4 Connecting to a Windows NT 4.0 Server Windows for Workgroups on “OK.” 13 Accept the default “Network Drivers” and click on “Close.” • IBM Token-Ring ISA Adapter, NDIS2 only [NDIS2] • Microsoft NetBEUI • IPX/SPX Compatible Transport with NetBIOS 14 At the “Network Setup” dialog box, click “OK.” 15 Set your User Name, Work ...

  • HP (Hewlett-Packard) 72H3482 - page 29

    4 Connecting to a Windows NT 4.0 Server Windows for Workgroups ...

  • HP (Hewlett-Packard) 72H3482 - page 30

    4 Connecting to a Windows NT Server 4.0 Windows 95 SR2 Windows 95 SR2 Requirements • HP Vectra with Windows 95 SR2 installed. • IBM Auto 16/4 TR adapter and drivers diskettes ver 2.1 Driver Name: NETIBM4.INF Size: 30KB Date: 1/30/98 • Microsoft Windows 95 SR2 media. • Microsoft Windows NT 4.0 server that supports Net BEUI, NWLink IPX/ SPX, ...

  • HP (Hewlett-Packard) 72H3482 - page 31

    4 Connecting to a Windows NT Server 4.0 Windows 95 SR2 7 Reboot the machine and allow it to boot to Windows 95. 8 Windows 95 SR2 should automatically recognize the IBM Auto 16/4 TR adapter card. If you are using a Vectra VL8, go directly to step 9. If you are using a Vectra VE7/VE8, follow the instructions below to complete the installation. a Clic ...

  • HP (Hewlett-Packard) 72H3482 - page 32

    4 Connecting to a Windows NT Server 4.0 Windows 95 SR2 “Workgroup”, and “Computer Description” and click on “OK.” (If you do not have a Computer name, Workgroup name and Computer description, contact your network administrator) 16 When prompted for your Windows 95 CD-ROM, click on “OK.” 17 Set the path to your Windows 95 files and c ...

  • HP (Hewlett-Packard) 72H3482 - page 33

    4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version3.51 Windows NT Workstation Version3.51 Requirements • HP Vectra VL8 with Windows NT Workstation 3.51 installed. • IBM Turbo 16/4 TR adapter and drivers diskettes ver 2.1 Driver Name: IBMTOK5.SYS Size: 51KB Date: 9/28/96 • DOS and MS-Windows NT workstation 3.51 media. • M ...

  • HP (Hewlett-Packard) 72H3482 - page 34

    4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version3.51 10 Click on “YES” in the “Network Settings” dialog box, and NT Networking will be installed on your computer. 11 Insert the Windows NT Workstation CD. 12 In “Windows NT Setup”, set the path to your NT files and click on the “Continue” button. (If you have an ...

  • HP (Hewlett-Packard) 72H3482 - page 35

    4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version3.51 25 At the “Domain/Workgroup Settings” dialog box, click on “OK” to accept the default “Workgroup” as your workgroup name. (If you do not have the required information, contact your network administrator.) 26 To complete the installation, remove the floppy disk , ...

  • HP (Hewlett-Packard) 72H3482 - page 36

    4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version 4.0 Windows NT Workstation Version 4.0 Requirements • HP Vectra VL8 with Windows NT Workstation 4.0 installed. • IBM Turbo 16/4 TR adapter and drivers diskettes ver 2.1 Driver Name: IBMTOK5.SYS Size: 51KB Date: 9/28/96 • DOS and MS-Windows NT workstation 4.0 media. • Mic ...

  • HP (Hewlett-Packard) 72H3482 - page 37

    4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version 4.0 10 In the Network Setup Wizard dialog box, make sure that “Wired to the Network” is checked and click on “Next”. 11 Click on “Select from list” and click on “Have Disk” and set path to “A:NT” (If you have a preloaded HDD, set path to “C:MastersLanDrv ...

  • HP (Hewlett-Packard) 72H3482 - page 38

    4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version 4.0 26 At the “Domain/Workgroup Settings” dialog box, click on “OK” to accept the default “Workgroup” as your workgroup name. (If you do not have the required information, contact your network administrator.) 27 To complete the installation, remove the floppy disk, a ...

  • HP (Hewlett-Packard) 72H3482 - page 39

    4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version 4.0 ...

  • HP (Hewlett-Packard) 72H3482 - page 40

    ...

  • HP (Hewlett-Packard) 72H3482 - page 41

    V ersion Number IBM T urbo 16/4 Rev .1 ...

Производитель HP (Hewlett-Packard) Категория Network Cables

Документы, которые мы получаем от производителя устройства HP (Hewlett-Packard) 72H3482 мы можем разделить на несколько групп. Это в частности:
- технические чертежи HP (Hewlett-Packard)
- инструкции обслуживания 72H3482
- паспорта изделия HP (Hewlett-Packard)
- информационные брошюры
- энергетические этикетки HP (Hewlett-Packard) 72H3482
Все из них важны, однако самую важную информацию с точки зрения пользователя мы найдем в инструкции обслуживания HP (Hewlett-Packard) 72H3482.

Группа документов, определяемая как инструкции обслуживания, делится также на более подробные типы, такие как: Инструкции монтажа HP (Hewlett-Packard) 72H3482, инструкции обслуживания, короткие инструкции или инструкции пользователя HP (Hewlett-Packard) 72H3482. В зависимости от потребностей, Вам необходимо поискать требуемый документ. На нашем сайте Вы можете просмотреть самую популярную инструкцию использования изделия HP (Hewlett-Packard) 72H3482.

Похожие инструкции обслуживания

Полная инструкция обслуживания устройства HP (Hewlett-Packard) 72H3482, как должна выглядеть?
Инструкция обслуживания, определяемая также как пособие пользователя, или просто "руководство" - это технический документ, цель которого заключается в использовании HP (Hewlett-Packard) 72H3482 пользователями. Инструкции пишет, как правило технический писатель, языком, доступным для всех пользователей HP (Hewlett-Packard) 72H3482.

Полная инструкция обслуживания HP (Hewlett-Packard), должна заключать несколько основных элементов. Часть из них менее важная, как например: обложка / титульный лист или авторские страницы. Однако остальная часть, должна дать нам важную с точки зрения пользователя информацию.

1. Вступление и рекомендации, как пользоваться инструкцией HP (Hewlett-Packard) 72H3482 - В начале каждой инструкции, необходимо найти указания, как пользоваться данным пособием. Здесь должна находится информация, касающаяся местонахождения содержания HP (Hewlett-Packard) 72H3482, FAQ и самых распространенных проблем - то есть мест, которые чаще всего ищут пользователи в каждой инструкции обслуживания
2. Содержание - индекс всех советов, касающихся HP (Hewlett-Packard) 72H3482, которое найдем в данном документе
3. Советы по использованию основных функций устройства HP (Hewlett-Packard) 72H3482 - которые должны облегчить нам первые шаги во время использования HP (Hewlett-Packard) 72H3482
4. Troubleshooting - систематизированный ряд действия, который поможет нам диагностировать а в дальнейшем очередность решения важнейших проблем HP (Hewlett-Packard) 72H3482
5. FAQ - чаще всего задаваемые вопросы
6. Контактные данные Информация о том, где искать контактные данные производителя / сервисного центра HP (Hewlett-Packard) 72H3482 в данной стране, если самостоятельно не получится решить проблему.

У вас вопрос, касающийся HP (Hewlett-Packard) 72H3482?

Воспользуйтесь формуляром, находящимся ниже

Если с помощью найденной инструкции Вы не решили свою проблему с HP (Hewlett-Packard) 72H3482, задайте вопрос, заполнив следующий формуляр. Если у какого то из пользователей была похожая проблема с HP (Hewlett-Packard) 72H3482 со всей вероятностью он захочет поделиться методом ее решения.

Перепишите текст с картинки

Captcha
Новая картинка

Комментарии (0)