Инструкция обслуживания Behringer BTR2000

18 страниц 1.52 mb
Скачать

Перейти на страницу of 18

Summary
  • Behringer BTR2000 - page 1

    Users manual Version 1.0 April 2005 DEUTSCH RACKTUNER BTR2000 ...

  • Behringer BTR2000 - page 2

    2 RACKTUNER BTR2000 CAUTION: To reduce the risk of electric shock, do not remove the top cover (or the rear section). No user serviceable parts inside; refer servicing to qualified personnel. WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain and moisture. The apparatus shall not be exposed to dripping or sp ...

  • Behringer BTR2000 - page 3

    3 RACKTUNER BTR2000 DEUTSCH TABLE OF CONTENTS 1. INTRODUCTION ......................................................................................................... 4 1.1 Before you get started .................................................................................................................. 4 1.1.1 Shipment ..................... ...

  • Behringer BTR2000 - page 4

    4 RACKTUNER BTR2000 1. INTRODUCTION Thank you for the confidence you have placed in us with your purchase of the BTR2000. You have acquired an extraordinary combination of a tuner and a metronome with integrated rack lighting that also makes it perfect for on-stage use. This advanced equipment sets new standards with its extensive list of features. ...

  • Behringer BTR2000 - page 5

    5 RACKTUNER BTR2000 DEUTSCH Should your BEHRINGER dealer not be located in your vicinity, you may directly contact one of our subsidiaries. Corresponding contact information is included in the original equipment packaging (Global Contact Information/European Contact Information). Should your country not be listed, please contact the distributor nea ...

  • Behringer BTR2000 - page 6

    6 RACKTUNER BTR2000 TRANSPOSE/REF [TAP] button. Tuner mode: A short tap on this button lets you use the wheel for transposition (chapter 4.3). Keeping the button pressed longer lets you calibrate the standard A pitch (chapter 4.2.1). Metronome mode: The BTR2000 can recognize and save a tempo that is entered by pressing the [TAP] button at lea ...

  • Behringer BTR2000 - page 7

    7 RACKTUNER BTR2000 DEUTSCH ...

  • Behringer BTR2000 - page 8

    8 RACKTUNER BTR2000 + T o enable reference tones and the metronome, click to be output from the MAIN connector , INPUT 2 must be selected and there must be nothing plugged into the SOUND connector! Using the built-in microphone If you want to use the built-in microphone, you must select INPUT 2 and the MUTE button must be pressed. 4. TUNER The BTR2 ...

  • Behringer BTR2000 - page 9

    9 RACKTUNER BTR2000 DEUTSCH 4.1.2 T uning with the built-in microphone + T o be able to work with the built-in microphone, there must be no cable plugged into the INPUT2 connector in the back of the BTR2000 and the MUTE button must be depressed. 1 . Select INPUT 2 with the INPUT switch on the front of the BTR2000. The 2/MIC LED lights up. 2 . Mute ...

  • Behringer BTR2000 - page 10

    10 RACKTUNER BTR2000 Bass ( BAS ) This mode is especially well suited for a 6-string bass. (B - E - A - D - G - C) Baritone ( brt ) This setup helps you tune a guitar to a baritone tuning, in which each string is tuned 5 half-tones (a fourth) lower than a normal guitar. (B - E - A - D - F sharp - B) Banjo ( bjo ) The very widely used banjo tuning i ...

  • Behringer BTR2000 - page 11

    11 RACKTUNER BTR2000 DEUTSCH 4.3.1 Manual calibration The pitch of the standard A is set to a particular frequency using the BTR2000 control panel. 1 . Depress the TRANSPOSE/REF button for at least two seconds. The ¹ 440 LED flashes. The display shows the frequency currently set for the standard A, e.g. 440 . 2 . You can adjust the pit ...

  • Behringer BTR2000 - page 12

    12 RACKTUNER BTR2000 1 . Briefly press the TRANSPOSE/REF button. The TRANSP light flashes and the display shows the transposition currently set ( 0 , if no transposition is set). 2 . Turn the wheel to transpose up to 7 half-tones higher or lower. The display indicates the number of half-tones by which a non-transposed instrument is too high ( 1, 2 ...

  • Behringer BTR2000 - page 13

    13 RACKTUNER BTR2000 DEUTSCH 5. METRONOME The integrated metronome in the BTR2000 has a range of 30 b eats p er m inute (BPM) to 240 BPM. There are essentially 2 ways to use the metronome: s You can pre-set a tempo (e.g. 60BPM). s The BTR2000 can pick up a tempo set by you. To use the metronome, the BTR2000 must be in metronome mode: 1 . Press a ...

  • Behringer BTR2000 - page 14

    14 RACKTUNER BTR2000 Acoustic indicator The selected tempo is also output at the SOUND or MAIN connector. + If your instrument is plugged into INPUT 1, the metronome click is output only through the SOUND connector . If it is plugged into INPUT 2, and the SOUND output is no t in use, the metronome click is output together with the instrument signal ...

  • Behringer BTR2000 - page 15

    15 RACKTUNER BTR2000 DEUTSCH 7. APPLICA TION EXAMPLES The following sample configurations should give you an idea how the BTR2000 can be integrated in a more or less complex environment. If you have only one amplifier available, the setup shown in figure 7.1 is recommended. ...

  • Behringer BTR2000 - page 16

    16 RACKTUNER BTR2000 8. INST ALLA TION 8.1 Rack installation The BTR2000 requires one height unit (1 HU) for installation in a 19" rack. Be certain to leave an additional 10cm free in the back for the connectors. For installation in a rack, M6 machine screws and nuts should be used. Ensure a sufficient air supply and to not place your BTR20 ...

  • Behringer BTR2000 - page 17

    17 RACKTUNER BTR2000 DEUTSCH 9. SPECIFICA TIONS AUDIO CONNECTORS INPUT 1 1/4" TS connector on the front and back Input impedance 1 M Ω , relay hard bypass INPUT 2 1/4" TS connector Input impedance 1 M Ω , buffered SOUND 1/4" TS connector Output impedance 4.5 k Ω MAIN 1/4" TS connector Output impedance 500 Ω CONNECTOR FOR ...

  • Behringer BTR2000 - page 18

    18 RACKTUNER BTR2000 SHORT INSTRUCTIONS ...

Производитель Behringer Категория Musical Instrument

Документы, которые мы получаем от производителя устройства Behringer BTR2000 мы можем разделить на несколько групп. Это в частности:
- технические чертежи Behringer
- инструкции обслуживания BTR2000
- паспорта изделия Behringer
- информационные брошюры
- энергетические этикетки Behringer BTR2000
Все из них важны, однако самую важную информацию с точки зрения пользователя мы найдем в инструкции обслуживания Behringer BTR2000.

Группа документов, определяемая как инструкции обслуживания, делится также на более подробные типы, такие как: Инструкции монтажа Behringer BTR2000, инструкции обслуживания, короткие инструкции или инструкции пользователя Behringer BTR2000. В зависимости от потребностей, Вам необходимо поискать требуемый документ. На нашем сайте Вы можете просмотреть самую популярную инструкцию использования изделия Behringer BTR2000.

Похожие инструкции обслуживания

Полная инструкция обслуживания устройства Behringer BTR2000, как должна выглядеть?
Инструкция обслуживания, определяемая также как пособие пользователя, или просто "руководство" - это технический документ, цель которого заключается в использовании Behringer BTR2000 пользователями. Инструкции пишет, как правило технический писатель, языком, доступным для всех пользователей Behringer BTR2000.

Полная инструкция обслуживания Behringer, должна заключать несколько основных элементов. Часть из них менее важная, как например: обложка / титульный лист или авторские страницы. Однако остальная часть, должна дать нам важную с точки зрения пользователя информацию.

1. Вступление и рекомендации, как пользоваться инструкцией Behringer BTR2000 - В начале каждой инструкции, необходимо найти указания, как пользоваться данным пособием. Здесь должна находится информация, касающаяся местонахождения содержания Behringer BTR2000, FAQ и самых распространенных проблем - то есть мест, которые чаще всего ищут пользователи в каждой инструкции обслуживания
2. Содержание - индекс всех советов, касающихся Behringer BTR2000, которое найдем в данном документе
3. Советы по использованию основных функций устройства Behringer BTR2000 - которые должны облегчить нам первые шаги во время использования Behringer BTR2000
4. Troubleshooting - систематизированный ряд действия, который поможет нам диагностировать а в дальнейшем очередность решения важнейших проблем Behringer BTR2000
5. FAQ - чаще всего задаваемые вопросы
6. Контактные данные Информация о том, где искать контактные данные производителя / сервисного центра Behringer BTR2000 в данной стране, если самостоятельно не получится решить проблему.

У вас вопрос, касающийся Behringer BTR2000?

Воспользуйтесь формуляром, находящимся ниже

Если с помощью найденной инструкции Вы не решили свою проблему с Behringer BTR2000, задайте вопрос, заполнив следующий формуляр. Если у какого то из пользователей была похожая проблема с Behringer BTR2000 со всей вероятностью он захочет поделиться методом ее решения.

Перепишите текст с картинки

Комментарии (0)