dropdown-ico

0.32 mb

of 6

Summary
  • Grizzly GMFP28S - page 1

    GRIZZLY & GRIZZLY CUB GrandMAC Series Outdoor Fireplace & Grill MODELS GMFP20, GMFP20S, GMFP28, GMFP28S ASSEMBL Y & OPERA TING INSTRUCTIONS WA RNING & SAFETY INFORMA TION 450 Brown Avenue Columbus, Georgia 31906 Masterbuilt Outdoor Products has made every effort to provide you with a quality , long-lasting, trouble-free product. In ...

  • Grizzly GMFP28S - page 2

    WARNING: FOR OUTDOOR USE ONLY. Carbon Monoxide Hazard (See Serial Plate On Unit). Never use indoors (home, garage, enclosed porch, tent). Keep the fireplace away from buildings, garages, flammable materials, flammable fluids and automobiles while in use. Do not leave unit unattended at any time. 1. Never use indoors. Outdoor use only . 2. Use a com ...

  • Grizzly GMFP28S - page 3

    CAUTION: Never move the unit while in use. If moving becomes necessary , do not touch body or lid as they may be very hot. GENERAL INSTRUCTIONS FOR SAFE USE OF FIREPLACE: 1. Do not burn trash, leaves, paper , cardboard or plywood in the fireplace. The use of seasoned hardwood is recommended. Avoid using softwood such as pine or cedar because they a ...

  • Grizzly GMFP28S - page 4

    LEGS FIRE SCREEN STEP 6 (GRIZZLY) Attach AIR DAMPERS: Connect AIR DAMPERS to LID (H) by threading AIR DAMPER T OPS (U) and AIR DAMPER BASES (V) with SMALL AIR DAMPER BOL TS (T) and WING NUTS (W). STORAGE (BOTH MODELS): FIRE SCREEN can be stored inside the LID and BASE on both models. The LEGS can be stored inside the LID and BASE in the GRIZZL Y CU ...

  • Grizzly GMFP28S - page 5

    STEP 5 (GRIZZLY) Attach HANDLE to LID: F irst thread a LONG BOL T (C) through HANDLE (B) and HANDLE BRACKET (BB), and fasten with a SMALL WASHER (E) and a NUT (F). Next, attach HANDLE to LID (H) and the LID HANGER BRACKET (D) to inside of LID (H) using two (2) BOL TS (A), SMALL WASHERS (E), LOCK W ASHERS (I) and NUTS (F). STEP 5 (GRIZZLY CUB) Attac ...

  • Grizzly GMFP28S - page 6

    STEP 3 (GRIZZLY) Attach HANDLE to BOWL: NOTE: TUBE LEG (O) should be located directly behind holes on front of BOWL (L) First thread a LONG BOL T (C) through HANDLE (B) and BOWL HANDLE BRACKET (M), and fasten with a NUT (F) and a SMALL W ASHER (E). Next, attach HANDLE to BOWL (L) using two (2) BOL TS (A), SMALL WASHERS (E), LOCK W ASHERS (I) and NU ...

Grizzly Outdoor Fireplace

:
-
-
-
-
-






1.
2.
3.
4.
5.
6.

Captcha

(0)