SKU 32940 Page 2 Specifications Air Inlet 1 / 4 ”-18 NPT Maximum Operating Pressure 90 PSI Blows P er Minute 4,500 BPM A ver age Air Consumption 4 CFM Weight 2- 1 / 4 Lbs. Accepts standard 10mm shank chisels. Safety W arnings and Precautions W ARNING: When using tools, basic safety precautions should al ways be f ollowed to reduce the risk of per ...
Harbor Freight Tools 32940 - page 3
SKU 32940 Page 3 9. Maintain tools with care . K eep tools clean f or better and saf er perf or mance . F ollow instructions for lubricating and changing accessories. Inspect tool cords and air hoses per iodically and, if damaged, ha ve them repaired b y an author iz ed technician. The handles must be k ept clean, dr y , and free from oil and greas ...
Harbor Freight Tools 32940 - page 4
SKU 32940 Page 4 stood by the operator that common sense and caution are factors which cannot be b uilt into this product, b ut must be supplied b y the operator . W ARNING: Some dust created by po wer sanding, sa wing, grinding, drilling, and other construction activities, contain chemicals known [to the State of California] to cause cancer , bir ...
Harbor Freight Tools 32940 - page 5
SKU 32940 Page 5 F or best ser vice y ou should incor porate an oiler , regulator , and inline filter , as shown in the diagram above. Hoses, couplers, oilers, regulators, and filters are all available at Harbor F reight T ools. PLEASE READ THE FOLLO WING CAREFULL Y THE MANUF A CTURER AND/OR DISTRIBUT OR HAS PRO VIDED THE P ARTS DIA GRAM IN THIS MA ...
Harbor Freight Tools 32940 - page 6
SKU 32940 Page 6 Operation Regulator (4) Retainer Spring (15) Chisel T r igger (16) Air Inlet (9) Cylinder (14) W arning!! Always disconnect the tool fr om the air sour ce before examining or changing bits. 1. Select the appropriate chisel/bit. Unscrew the Retainer Spring (15) and inser t the shank of the chisel/bit. Screw the Retainer Spring (15) ...
Harbor Freight Tools 32940 - page 7
SKU 32940 Page 7 Assembly Diagram NO TE : Some par ts are listed and shown f or illustration purposes only and are not availab le individually as replacement par ts. P ar ts List 4 . Examine your chisels/bits before using them. If a chisel is dull or cracked do not use it. Replace worn or broken chisels with approv ed replacement chisels from Harbo ...
