-
Kenmore 141.158033 - page 1
Operator's Manual: Heavy Duty Rotisserie Kit for 314/5 Bumer Kenmore Elite & Kenmore Premium Grills Model 141.158033 CAUTION: It is recommended that you do not exceed 10 pounds when using your rotisserie. Heavier foods can cause the rotisserie spit to flex excessively causing the rotisserie motor to be overloaded due to imbalanced operatio ...
-
Kenmore 141.158033 - page 2
16. If a longer detachable power-supply cords or extension cord is used, (1) The marked electrical rating of the cord set or extension cord should be at least as great as the electrical rating of the appliance, and (2) The cord should be arranged so that it will not drape over the countertop or tabletop where it can be pulled on by children or trip ...
-
Kenmore 141.158033 - page 3
Heavy Duty Rotisserie Assembly Instructions Tools required for assembly: Adjustable wrench or pliers and either a Flat Head or Phillips Head Screwdriver. Pre-Assembly Instructions Before assembling your Rotisserie, use the parts list below to check that all necessary parts have been included. Inspect parts for damage as you proceed. Do not assemble ...
-
Kenmore 141.158033 - page 4
Assembling The Motor Bracket Attach the Motor Bracket on the outside of the left grill bowl panel. Align the two holes of the Bracket with the holes on the grill bowl. Tighten securely using two #10-24 x 3/4" UNC screws, washers and nuts provided. (See fig. 1). For some Kenmora grills with lid side panels that ovedap grill bowl side panels (Se ...
-
Kenmore 141.158033 - page 5
For Model 141.158033 31415 Burner Grill Rotisserie: It is recommended that you add the extra 6.5" Extension Spit if you are using Grill Models 16671, 16673 or 16235. Screw the two Spit sections together using one Spring Washer. Tighten the sections together using two wrenches. Slide the Holding Forks onto each end of the assembled Rotisserie S ...
-
Kenmore 141.158033 - page 6
Installing The Rotisserie Insert the assembled Rotisserie into the Motor as shown below. The Motor should be on the left side of your grill. Place the Bushing into the slot opening on the right side of your grill bowl, then tighten the Collar Thumbscrew to the left of the Bushing. The Collar will stabilize the Rotisserie during the cooking process ...
