Package Contents Package contents include the following: 1 10 IMPORT ANT : If any piece is missing or damaged, please contact your local dealer or reseller for ser vice. For Y our Records Product Name: Serial Number: Date of Purchase: Purchased fr om: Notes: Gigabit User’s Manual Power Adapter Rack Mount Conver ter Brackets (Multi-Mode or Single ...
UNICOM Electric GEP-5400TF-C - page 3
Intr oduction Congratulations on purchasing a quality UNICOM pr oduct. Unicom’s VELOCITY Series repr esents the newest, most advanced generation of signal conversion technology . Unicom’s Giga Fiber Conver ter is a cost- ef fective solution for the conversion of 10/100/1000Base-T (Auto MDI/MDIX) and pure 1000 Base-T to 1000Base-SX/LX cabling. I ...
UNICOM Electric GEP-5400TF-C - page 4
3 8 Cabling • Twisted-pair segments can be Unshielded Twisted Pair (UTP) or Shielded Twisted Pair (STP) cabling. The cable must comply with the IEEE 802.3 10/100/1000Base-T standard for Categor y 5e/6. The cable between the conver ter and the link par tner (switch, hub, workstation, etc.) must be 100 meters (328 ft.) or less in length. • Fiber ...
UNICOM Electric GEP-5400TF-C - page 5
Installing Converters into Chassis Follow the steps below to install modular conver ters into the 10 space Conver ter Chassis (pn: FEP-593110). A. Remove the blank bracket from the chassis by r otating screw counterclockwise. Put the blank bracket aside. B. Open the rack mount bracket kit. The kit contains two rack mount brackets and four screws. C ...
UNICOM Electric GEP-5400TF-C - page 6
DIP Switch Description The DIP-switch is used to configure operation mode for LLF (Link Lost For warding) and operation mode for Copper/Fiber por t. The default value of Dipswitch is OFF . 10/100/1000Base-T to 1000Base-FX conver ter module Link Lost For warding: When LLF is enabled, it will allow copper por t link failure to be r epor ted to the Fi ...