Page 2 SKU 45001 Specifications Save This Manual Y ou will need the manual f or the safety w ar nings and precautions, assemb ly instructions, operating and maintenance procedures, par ts list and diagram. K eep your in voice with this manual. Wr ite the inv oice number on the inside of the front co v er . Keep the manual and invoice in a safe and ...
Harbor Freight Tools 45001 - page 3
Page 3 SKU 45001 6. Use the right tool for the job . Do not attempt to f orce a small tool or attachment to do the work of a larger industr ial tool. There are cer tain applications for which this tool was designed. Do not modify this tool and do not use this tool for a purpose f or which it was not intended. 7. Dress properl y . Do not wear loose ...
Harbor Freight Tools 45001 - page 4
Page 4 SKU 45001 Rev 09/01 19. Use proper size and type extension cord . If an extension cord is required, it must be of the proper size and type to supply the correct current to the compressor without heating up. Otherwise, the extension cord could melt and catch fire, or cause electrical damage to the compressor . 20. Maintenance . F or your saf ...
Harbor Freight Tools 45001 - page 5
Page 5 SKU 45001 Assembly The only assembly required is fitting the Y oke (#39) onto the Cup (#47) . 1. Slide the Y oke (#39) onto the Cup (#47) so that the groov es on the Cup (#47) connect to the tabs on the Y oke (#39) . 2. Once connected, secure by turning the Cup Lever (#40) to the left, locking it. Operation W arning! Nev er allo w the Spra y ...
Harbor Freight Tools 45001 - page 6
Page 6 SKU 45001 Operation (continued) 5. For an even finish, cover your work using smooth even strokes and a 50% overlap. Note: This HVLP Industr ial Spra y Gun will not b lotch or model when using any coating. Note: During operation, per iodically check that the Y oke (#39) is securely f astened to the Cup (#47) . The Cup Lever (#40) must be secu ...
Harbor Freight Tools 45001 - page 7
Page 7 SKU 45001 Problem 4 (Continued) Cause: Loose or cracked Needle (#24) . Solution: Tighten or replace. Cause: Fluid too heavy for suction feed. Solution: Thin material Cause: Dr y or wor n P ac king (#10) or Bushings (#11,12) . Solution: Lubricate, replace, or tighten. Problem 5: Will not spra y . Cause: Low air pressure at Spray Gun. Solution ...
Harbor Freight Tools 45001 - page 8
Page 8 SKU 45001 NO TE : Some par ts are listed and shown f or illustration purposes only and are not av ailable individually as replacement par ts. PLEASE READ THE FOLLO WING CAREFULL Y THE MANUF ACTURER AND/OR DISTRIB UT OR HAS PRO VIDED THE P AR TS DIAGRAM IN THIS MANU AL AS A REFERENCE TOOL ONL Y . NEITHER THE MANUF ACTURER NOR DISTRIBU- T OR M ...
Harbor Freight Tools 45001 - page 9
Page 9 SKU 45001 Assembly Drawing IMPORT ANT : Bef ore using for the fir st time, the spray gun m ust be c leaned using a solvent based thinner . If not remo ved, the red oil used by the manufacturer for testing and corrosion protection may contaminate paint. IMPORT ANT : The Spray Gun m ust be c leaned immediately after use. Improper cleaning is a ...
Harbor Freight Tools 45001 - page 10
90 Day W arranty Harbor Freight T ools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or i ...
