DC MODULE CONNECTORS Standard Connector (P/N 5060-3386) Relay Connector (P/N 5060-3387) Installation Guide General Information Load connection s are m ade on the conn ector supplied with each m odule. The connector is f astened to the back of the mainf rame. Modules can then be installed or removed from the m ainframe w ithout disturbing the w irin ...
Agilent Technologies 5060-3387 - page 2
Set the Sense Sw itch Each connector h as a local/remote sens e switch . Unless you are using re mote sensing, make sure tha t the sense switch is set to Local . Re mote sensing is used in applications that req uire vo ltage sensing d irectly at the load. Installing a Relay Board in a Standard Connector You can u pgrade a standard conn ector to a r ...