-
Polycom AP-6 - page 1
June 2008 Edition 1725-36046-001 Version G Configuration Guide Avaya AP-6, AP-7, AP-8 Access Points Fi e l d V e rifi ed ...
-
Polycom AP-6 - page 2
Field Verified Configuration Guide PN: 1725-36046-001_G.doc 2 Trademark Information Polycom® and t he logo design s SpectraLink® LinkPlus Link NetLink SVP Are trademarks and registe red trademarks of Polycom, Inc. in the Un ited States of Am erica and various c ountries. All ot her trademarks used herein are the propert y of their respective owne ...
-
Polycom AP-6 - page 3
Avaya AP-6, AP-7, AP -8 Access Points PN: 1725-36046-001_G.doc 3 Introduction Customers have reported that the WLAN products described in this document operate adequately with SpectraLink Wireless Telephones at their location using the softwa re version listed below. For Field Verified WLAN products, Polycom has not conducted any testing and theref ...
-
Polycom AP-6 - page 4
Field Verified Configuration Guide PN: 1725-36046-001_G.doc 4 Access Point Capacity and Positioning Please refer to the Polycom Deploying Enterprise-Grade Wi-Fi Telephony white paper. This document covers the security, coverage, capacity and QoS considerations necessary for ensuring excellent voice quality with enterprise Wi-Fi networks. For more d ...
-
Polycom AP-6 - page 5
Avaya AP-6, AP-7, AP -8 Access Points PN: 1725-36046-001_G.doc 5 Access Point Configuration (Up to Version 2.4.11) 1. Connect to the AP via Netscape or Internet Explorer by navigating to the URL http://<IP_Addr> (where <IP_Addr> is the IP address of the AP). 2. Note: these configuration steps can also be accomplished using the SNMP-base ...
-
Polycom AP-6 - page 6
Field Verified Configuration Guide PN: 1725-36046-001_G.doc 6 c. Conditional: If you are not using a SpectraLink 8000 SVP Server and intend to use 802.11b/g mode, you must also enter the command: Type set specli nklegacysuppo rt , then press Enter. 11. Restart the AP. The AP is now ready for use with SpectraLink Wireless Telephones. ...
-
Polycom AP-6 - page 7
Avaya AP-6, AP-7, AP -8 Access Points PN: 1725-36046-001_G.doc 7 Access Point Configuration (Version 2.52) 1. Connect to the AP via Netscape or Internet Explorer by navigating to the URL http://<IP_Addr> (where <IP_Addr> is the IP address of the AP). 2. From the main page, click on the Config ure link. 3. To configure WEP settings, obta ...
-
Polycom AP-6 - page 8
Field Verified Configuration Guide PN: 1725-36046-001_G.doc 8 c. A line should come back indicating: speclinkleg acysupport enable 10. Restart the AP. The AP is now ready for use with SpectraLink Wireless Telephones. ...
