SKU 40134 Page 3 6. Dress properly . Do not wear loose clothing or jewelry as they can be caught in moving parts. Protective, electrically non-conductive clothes and non-skid footwear are recommended when working. Wear restrictive hair covering to contain long hair . 7. Use eye and ear protection . Always wear ANSI approved impact safety goggles wh ...
Harbor Freight Tools 40134 - page 4
SKU 40134 Page 4 18. Use proper size and type extension cord . If an extension cord is required to power tools, it must be of the proper size and type to supply the correct current to the tool without heating up. Otherwise, the extension cord could melt and catch fire, or cause electrical damage to the tool. Most hand tools require an extension cor ...
Harbor Freight Tools 40134 - page 5
SKU 40134 Page 5 Installation Caution: Installation should be completed by a qualified technician. Before at- tempting installation of the Air Horns, remove the keys from the vehicle igni- tion, and place wheel chocks on both sides of at least 2 wheels. Make sure engine and engine compartment is cool before beginning work. 1. Lift the vehicle hood ...
Harbor Freight Tools 40134 - page 6
SKU 40134 Page 6 6. Make the connections to the Compressor (3) and the Electric Relay (5) as shown on the Wiring Diagram. Note: Some vehicles may employ a positive ground. If this is the case, refer to Wiring Diagram Positive Ground. Pay attention to polarity . If the Compressor turns on and the Horns do not sound, reverse the Compressor connection ...
Harbor Freight Tools 40134 - page 7
SKU 40134 Page 7 PLEASE READ THE FOLLOWING CAREFULL Y THE MANUF ACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE P ARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONL Y . NEITHER THE MANUF ACTURER NOR DISTRIBUTOR MAKES ANY REPRESENT A TION OR WARRANTY OF ANY KIND TO THE BUYER THA T HE OR SHE IS QUALIFIED TO MAKE ANY REP AIRS TO THE PRODUCT OR THA T HE O ...
