-
Brother BE-901 - page 1
1 Technical Reference Title: Replacing Power Supply Board Date: February 25, 2009 Model s: BE - 901, BE - 901 - PC, BE - 1201, BE - 1201 - PC, BES - 916, BES - 1216 1. Make sure machine is OFF and Unplugged. 2. Remove cover assy. (Six screws removed “A” , Three loosened “B” ) 3. Identifying Main Bord. (Also: Power Supply, and Head Board) A ...
-
Brother BE-901 - page 2
2 4. Unplug ging all wire connector harnesses. P1, P2, P3, P4, P5, and P6. 5. Unplug all connectores to remove board. However, keep in mind that connectors only go in one spot and can not be confused. 6. Board is held inplace by plastic clip locks. In ord er to unlock you will need to squeese locks and lightly pull - up on board to release. (Fig. 1 ...
-
Brother BE-901 - page 3
3 7. Once you remove old board you are ready to install the new one. Things to look for before installing. A. Fuses: If th e new board is missing fuses remove from old board to install on new board. 8. Installing board , p leas e follow reverse instructions o f removal. 9. After board is installed and all plugged in you are ready to plug machine in ...
