OPERATING MANUAL 300 WATT ELECTRONIC LOAD MODULE Agilent Model 60502B FOR MODULES WITH SERIAL NUMBERS: 3118A-00101 AND ABOVE Agilent Part No. 60502-90008 Printed in U.S.A. Microfiche No. 60502-90009 June, 1991 ...
Agilent Technologies 60502B - page 2
DECLARATION OF CONFORMITY according to ISO/IEC Guide 22 and EN 45014 Manufacturer’s Name : Agilent Technologies Manufacturer’s Address: New Jersey Division 140 Green Pond Road Rockaway, NJ 07866 U.S.A. declares that the product Product Name: Load mainframe and modules Model Number(s): Agilent 6050A, 6051A mainframes with modules Agilent 60501A/ ...
Agilent Technologies 60502B - page 3
1 300-Watt Module About This Manual This manual provides information for the Agilent 60502B 300-Watt Electronic Load Module. It is designed as a supplement to the Agilent 6050A/6051A Multiple Input Mainframe Electronic Load Operating Manual (part number 06050- 90001). Four tables provide the following module-specific information: Table 60502-1 list ...
Agilent Technologies 60502B - page 4
2 Table 60502-1. Specification and Supplemental Characteristics SPECIFICATIONS DC Input Rating: Current: 0 to 60 A Voltage : 3 V to 60 V (minimum dc operation from 0 to 2 V for 0 to 60 A) Power: 300 W at 40 ° C (derated to 225 W at 55 ° C) A. OPERATING CHARACTERISTICS B. DERATED CURRENT DETAIL Constant Current Mode: Ranges: 0 to 6 A; and 0 to 60 ...
Agilent Technologies 60502B - page 5
3 Table 60502-1 Specifications and Supplemental Characteristics (continued) Transient Operation: Continuous Mode Frequency Range: 0.25 Hz to 10 kHz Frequency Resolution: 4% Frequency Accuracy: 3% Duty Cycle Range: 3% to 97% (0.25 Hz to 1 kHz); 6% to 94% (1 kHz to 10 kHz) Duty Cycle Resolution: 4% Duty Cycle Accuracy: 6% of setting ± 2% Pulsed Mode ...
Agilent Technologies 60502B - page 6
4 Table 60502-1 Specifications and Supplemental Characteristics (continued) External Analog Programming 0 to 10 V (dc or ac): Bandwidth: 10 kHz (3 db frequency) Accuracy: ± 4.5% ± 75 mA (0 to 6 A range) ± 4.5% ± 250 mA (0 to 60 A range) ± 0.8% ± 200 mV (0 to 60 V range) Temperature Coefficient: 100 ppm/ ° C ± 6 mA/ ° C (current ranges) 100 ...
Agilent Technologies 60502B - page 7
5 Table 60502-1 Specifications and Supplemental Characteristics (continued) Current Slew Rate:* Rate # 60 A Range Step 6 A Range Step Transition Time 1 1 A/ms 0.1 A/s 8.0 ms 2 2.5 A/ms 0.25 A/s 3.2 ms 3 5 A/ms 0.5 A/s 1.6 ms 4 10 A/ms 1 A/ms 800 µ s 5 25 A/ms 2.5 A/ms 320 µ s 6 50 A/ms 5 A/ms 160 µ s 7 0.1 A/ µ s 10 A/ms 80 µ s 8 0.25 A/ µ s ...
Agilent Technologies 60502B - page 8
6 Table 60502-1 Specifications and Supplemental Characteristics (continued) Source Turn-On Current Overshoot: Less than 10% of final value (in CC and CR modes when connected to power supplies with voltage rise times of greater than 500 µ s). Programmable Short Circuit: 0.033 Ω (0.002 Ω typical) Programmable Open Circuit: 20 k Ω (typical) Dri ...
Agilent Technologies 60502B - page 9
7 Table 60502-2. Programming Ranges (continued) Function Front Panel Front Panel HPSL Command Range of Values Key Display (Short Form) Transient Operation Set Frequency FREQ value "TRAN:FREQ value" 0.25 Hz to 10 kHz Set Duty Cycle (shift) DCYCLE value "TRAN:DCYC value" 3-97% (0.25 Hz-1 kHz) 6-94% (1 kHz-10 kHz) *Set Pulse Width ...
Agilent Technologies 60502B - page 10
8 Table 60502-4. Calibration Information Ranges and Calibration Points Variables Variables Value Power Supply Settings Current Shunt High Current Range Hi_curr_rng 60 5 V/61 A 100 A High Current Offset Hi_curr_offset 0.0282 Low Current Range Lo_curr_rng 6 5 V/10 A 15 A Low Current Offset Lo_curr_offset 0.0197 Voltage Range N/A N/A 61 V/5 A N/A Volt ...
Agilent Technologies 60502B - page 11
9 Agilent Sales and Support Office For more information about Agilent Technologies test and measurement products, applications, services, and for a current sales office listing, visit our web site: http://www.agilent.com/find/tmdir You can also contact one of the following centers and ask for a test and measurement sales representative. United Stat ...
