-
Panasonic KX-TC1200ALF - page 1
PLEASE READ BEFORE USE AND SAVE. Cordless Phone Model No. KX-TC1200ALB KX-TC1200ALW/KX-TC1200ALS KX-TC1200ALF/KX-TC1200NZB KX-TC1200NZW/KX-TC1200NZF Operating Instructions Charge the battery for about 15 hours before initial use. 1 Getting Started 2 Making/Answering Calls 3 Speed Dialler 4 One-Touch Dialler 5 Special Features 6 Things You Should Kn ...
-
Panasonic KX-TC1200ALF - page 2
1-C Settings 1-A Accessories 1-B Location of Controls Handset Base unit ∑ AC Adaptor .......................one ∑ Telephone Line Cord ..........................one IN USE/CHARGE HANDEST LOCATOR Handset Hook (6-D) Charge Contacts (6-A) IN USE/CHARGE Indicator (1-C, 5-A) Antenna (1-C) (HANDSETLOCATOR) Button (5-A) RECHARGE Indicator (6-A) (TA ...
-
Panasonic KX-TC1200ALF - page 3
(TALK) and Indicator (CH) (LOUD) (REDIAL) To redial the last number dialled Press (TALK) (REDIAL) . To select the handset receiver volume Press (LOUD) while talking. ≥ Each time you press the button, the volume level will change from LOW (preset) to HIGH. If noise interferes with the conversation Press (CH) to select a clearer channel or move clo ...
-
Panasonic KX-TC1200ALF - page 4
You can store up to 10 phone numbers. The dialling buttons ( (0) to (9) ) function as memory stations. The TALK indicator light must be off before programming. TALK Indicator Memory Station Numbers (AUTO) (PAUSE) (PROGRAM) If you misdial Press (PROGRAM) to end storing. Start again from step 1. To erase a stored number Press (PROGRAM) (AUTO) the mem ...
-
Panasonic KX-TC1200ALF - page 5
Memory Station Numbers (AUTO) (TALK) and Indicator 1 Press (TALK) . ≥ The TALK indicator lights. 2 Press (AUTO) . 3 Press the memory station number ( (0) to (9) ). ≥ The stored number is dialled. (DIRECT) (TALK) and Indicator 1 Press (TALK) . ≥ The TALK indicator lights. 2 Press (DIRECT) . ≥ The stored number is dialled. 3-B Dialling a Stor ...
-
Panasonic KX-TC1200ALF - page 6
(AUTO) (RECALL) (PAUSE) (PROGRAM) (TALK) IN USE/CHARGE Indicator (HANDSETLOCATOR) 5-A Handset Locator You can locate the handset or page the handset. 1 Press (HANDSETLOCATOR) on the base unit. ≥ The IN USE/CHARGE indicator flashes and the handset beeps for 1 minute. 2 To stop paging, press (HANDSETLOCATOR) again or press (TALK) twice on the h ...
-
Panasonic KX-TC1200ALF - page 7
6-A Battery Recharge When the RECHARGE indicator flashes or the unit beeps intermittently, place the handset on the base unit for about 15 hours to recharge the battery. 6-B Battery Replacement If the RECHARGE indicator flashes after being fully charged, replace the battery with a new Panasonic P-P301 (KX-A36A) battery. When replacing the battery ...
-
Panasonic KX-TC1200ALF - page 8
6-F Adding Another Phone This unit will not function during a power failure. To connect a standard telephone on the same line, use a telephone double adaptor. Standard Telephone Telephone Line Cord To Socket (Optional) Telephone Double Adaptor Standard Telephone Telephone Line Cord T-Adaptor To Single-Line Telephone Jack 6-E Before Requesting Help ...
