Bedienungsanleitung Airlink AP431W

14 Seiten 0.7 mb
Download

Zur Seite of 14

Summary
  • Airlink AP431W - page 1

    Ve r. 1 A Quick Inst allation Guide Model # AP431W Super G™ Multi-Functional Wireless Access Point ...

  • Airlink AP431W - page 2

    Getting S tarted This Quick Installation Guide only provides basic instructions. For more detailed information, please refer to the User ’ s Manual in the supplied CD. Please refer to the following diagrams to determine which operating mode you should use for your network. If you want to use the AP431W as an Access Point with minimal configuratio ...

  • Airlink AP431W - page 3

    Step 1 Connect one end of a network cable to the Network port of the Access Point and connect the other end to one of the LAN ports of the router (See the diagram below) . Step 2 Power on the Access Point by connecting one end of the supplied power adapter to the power jack of the Access Point and connecting the other end to an electrical outlet. S ...

  • Airlink AP431W - page 4

    Section 3 Gathering Information Step 1 From a computer connected to the router with a cable, go to Start , Run , type command (for Windows 95/98/ME) or cmd (for Windows 2000/XP) and click OK . Step 2 T ype ipconfig and press Enter . Y our network settings will be displayed. Step 3 W rite down the values for the IP Address , Subnet Mask , and Defaul ...

  • Airlink AP431W - page 5

    Step 1 Open your W eb Browser (Internet Explorer or Netscape), enter the IP Address of the Access Point (default: 192.168.1.250 ) in the address bar and press Enter . Section 4 Using W eb Configuration Utility Step 2 Enter admin for both the User name and Password and click OK . Y ou can use the Access Point’s built-in W eb Configuration Utility ...

  • Airlink AP431W - page 6

    Step 3 At the Wireless section, enter the SSID (Network Name) for your wireless network and select a Channel number . Step 4 Y ou may enable encryption (authentication) for your wireless network for security purpose, or to match the encryption settings of your existing Access Point. Select an encryption mode from the Authen- tication drop-down list ...

  • Airlink AP431W - page 7

    Step 4a WEP is a basic encryption type for wireless network. • Open System and disabling Encryption implies no encryption • Open System and enabling Encryption implies WEP open system mode • Shared Key and enabling Encryption implies WEP shared key mode • Open System/Shared Key and enabling Encryption implies WEP auto switch mode WEP (Wired ...

  • Airlink AP431W - page 8

    Step 4c WP A-PSK and WP A-2PSK are more secured than WEP and highly recommended. Select WP A-PSK or WP A2-PSK from the drop-down menu and enter the key value in the PassPhrase . Click Apply . WP A-PSK (WiFi Protected Access-Pre Shared Key) Y ou can refer to the User Manual in the provided CD for other authentication types. ...

  • Airlink AP431W - page 9

    Section 5 Step 1 Select the Operating Mode tab to display the Operating Mode page. Selecting Operating Modes This section describes how to change the Access Point’s operating modes. This mode allows your wireless computers to connect to your wired network. (Default mode) Access Point ...

  • Airlink AP431W - page 10

    AP Client The AP Client mode converts the Access Point to a wireless network adapter , allowing the network device such as your computer or game console to become a wireless client. Step 1 Select AP Client and enter the MAC address of the AP you want to connect to. Y ou can also click on the Scan button to display the available wireless networks, a ...

  • Airlink AP431W - page 11

    AP Repeater The AP Repeater mode converts the Access Point to a wireless repeater . By extending the wireless signal of the source AP/wireless router , the wireless coverage is expanded. Step 1 Select AP Repeater and enter the MAC address or use the Scan button to search for the remote AP (source AP/wireless router). Click Apply to save the changes ...

  • Airlink AP431W - page 12

    WDS (Bridge) The WDS mode converts the Access Point to a wireless bridge. It bridges the network clients from physically separate LANs into one virtual LAN. Step 1 Select WDS and enter the MAC address of the remote APs. Click Apply to save the changes. Step 2 Configure other Access Points in the same way . ...

  • Airlink AP431W - page 13

    WDS with AP The WDS mode converts the Access Point to a wireless bridge. It bridges the network clients from physically separate LANs into one virtual LAN and allows wireless clients to connect to the network via the Access Point. Step 1 Select WDS with AP and enter the MAC address of the remote APs. Click Apply to save the changes. Step 2 Configur ...

  • Airlink AP431W - page 14

    Section 6 Connecting to the Access Point Once you have properly configured the Access Point, your wireless computers should be able to detect its signal. Use your wireless network adapter ’s utility to detect and connect to the Access Point. Y ou can identify the Access Point by its MAC Address , which is displayed in the BSSID field of your wire ...

Produzent Airlink Kategorie Network Card

Dokumente, die wir vom Produzenten des Geräts Airlink AP431W erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Airlink
- Bedienungsanleitungen AP431W
- Produktkarten Airlink
- Informationsbroschüren
- oder Energieetiketten Airlink AP431W
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Airlink AP431W.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Airlink AP431W, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Airlink AP431W. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Airlink AP431W ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Airlink AP431W, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Airlink AP431W hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Airlink AP431W verständlich ist.

Eine gänzliche Bedienungsanleitung von Airlink sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Airlink AP431W bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Airlink AP431W befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Airlink AP431W, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Airlink AP431W - die uns die ersten Schritte während der Nutzung von Airlink AP431W erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Airlink AP431W hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Airlink AP431W im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Airlink AP431W?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Airlink AP431W nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Airlink AP431W hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)